Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 06/01/2024, à 17:29

jpt2042

[Résolu] Disque externe qui ne se monte pas

Bonjour,
J'ai un disque externe de 500 Mo sous NTFS et USB2, qui ne se monte plus, ni au démarrage, ni avec la commande "mount".
Ce même disque fonctionne normalement sur un autre ordinateur avec Windows.
Les clés USB se montent normalement.
Avant l'arrêt, j'avais de temps en temps (surtout après les mises à jour), les messages suivants au démarrage :
[ 12.816953] usb 2-3 : device not accpeting address3, error -62
[ 23.824941] usb 2-3 : device not accpeting address4, error -62
[ 35.600949] usb 2-3 : device not accpeting address6, error -62
[ 47.117600949] usb 2-3 : device not accpeting address7, error -62
[ 47 .125408]usb usb2-port3 :  unable to enumerate USB device

J'utilise la dernière version de Kubuntu.

Merci de me dire s'il y a une solution.

Jean-Pierre

Dernière modification par jpt2042 (Le 06/01/2024, à 23:19)

Hors ligne

#2 Le 06/01/2024, à 17:34

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Salut,

Au vu des messages d'erreur que tu indiques, il y a un manque de puissance d'alimentation sur le port USB utilisé.

Branches-tu ton disque directement sur ton PC ou via un hub USB ?

A+

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 06/01/2024, à 17:35

xubu1957

Re : [Résolu] Disque externe qui ne se monte pas

Bonjour,

Pour la présentation, lecture conseillée > memento des balises code.

Regarde [Tuto] Ma clef (ou autre support amovible) ne monte pas ou mal

Ancien fil de novembre 2023 > Démarrage anormal

Dernière modification par xubu1957 (Le 06/01/2024, à 17:37)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#4 Le 06/01/2024, à 17:57

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

Bonjour,
Je le branche directement.
Ce qui m'étonne est que les messages d'erreur sont apparus immédiatement après que j'ai enlevé Windows. Jusqu’à aujourd'hui, ils ne se voyaient qu'après certaines mises à jour. Il suffisait alors de redémarrer et le problème disparaissait.

La marque du disque est "My Passport". Sa capacité est de 500 Go et non de 500 Mo comme indiqué par erreur dans mon message.

JP

Hors ligne

#5 Le 06/01/2024, à 18:23

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Avec le disque externe branché.

Installe smartmontools et donne le retour de :

lsblk -fe7 -o +size

Avec le résultat de cette commande, on aura le nom du périphérique. On pourra alors vérifier l'état Smart de ton disque USB.

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#6 Le 06/01/2024, à 18:29

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

Voici :

p@jpt:~$ lsblk -fe7 -o +size
NAME        FSTYPE FSVER LABEL      UUID                                 FSAVAIL FSUSE% MOUNTPOINTS                              SIZE
sda                                                                                                                            931,5G
├─sda1      ext4   1.0              2b117b42-a26f-4cad-9786-fecb7cd31ec7  632,5G    26% /home                                    931G
└─sda4      vfat   FAT32            A06B-CDFA                                                                                    512M
sdb                                                                                                                            465,7G
└─sdb1      ntfs         MyPassport 048A8D0428D73189                                                                           465,7G
sdc                                                                                                                                0B
sr0                                                                                                                             1024M
nvme0n1                                                                                                                        119,2G
├─nvme0n1p1 ext4   1.0              61ab42df-5176-4fe0-85e7-e2d07cf4f869   96,5G    12% /var/snap/firefox/common/host-hunspell   119G
│                                                                                       /                                      
├─nvme0n1p2 swap   1                cb52fcdf-276f-4b09-84c7-12911d16034d                [SWAP]                                   191M
└─nvme0n1p3 vfat   FAT32            B425-D55A                              85,5M     7% /boot/efi                                 93M

Hors ligne

#7 Le 06/01/2024, à 18:35

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Récupère les données Smart avec :

sudo smartctl -s on -a /dev/sdb

Donne aussi le retour de :

sudo dmesg | grep sd

Dernière modification par inbox (Le 06/01/2024, à 18:36)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#8 Le 06/01/2024, à 18:37

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

jp@jpt:~$ sudo smartctl -s on -a /dev/sdb
[sudo] password for jp: 
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.0-14-generic] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Elements / My Passport (USB)
Device Model:     WDC WD5000BMVW-11AMCS0
Serial Number:    WD-WX71AC0V0659
LU WWN Device Id: 5 0014ee 600dec535
Firmware Version: 01.01A01
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Jan  6 18:36:32 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error unsupported field in scsi command
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (13680) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 135) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   158   153   021    Pre-fail  Always       -       3083
  4 Start_Stop_Count        0x0032   083   083   000    Old_age   Always       -       17569
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   047   047   000    Old_age   Always       -       38694
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4475
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       542
193 Load_Cycle_Count        0x0032   181   181   000    Old_age   Always       -       59144
194 Temperature_Celsius     0x0022   120   102   000    Old_age   Always       -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#9 Le 06/01/2024, à 18:43

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Tond disque externe est âgé (38694h de fonctionnement), mais en bon état.

Par contre, tu n'as pas donné la réponse à la 2ème commande.

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#10 Le 06/01/2024, à 18:45

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

La voici

jp@jpt:~$ sudo dmesg | grep sd
[    0.010786] ACPI: SSDT 0x0000000078337D70 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.010790] ACPI: SSDT 0x000000007833AED0 0027FC (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.010805] ACPI: SSDT 0x000000007833EF00 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.862951] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.237449] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.237586] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.237593] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.237631] sd 0:0:0:0: [sda] Write Protect is off
[    1.237636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.237679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.237722] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    1.293144]  sda: sda1 sda4
[    1.293530] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.469459] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.469687] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[    2.469805] sd 6:0:0:0: [sdb] Write Protect is off
[    2.469807] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    2.469927] sd 6:0:0:0: [sdb] No Caching mode page found
[    2.469930] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.505046]  sdb: sdb1
[    2.505185] sd 6:0:0:0: [sdb] Attached SCSI disk
[    4.098928] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    4.100681] sd 7:0:0:0: [sdc] Media removed, stopped polling
[    4.101057] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    6.246294] EXT4-fs (sda1): mounted filesystem 2b117b42-a26f-4cad-9786-fecb7cd31ec7 r/w with ordered data mode. Quota mode: none.
[   32.020228] ntfs3: sdb1: It is recommened to use chkdsk.
[   32.115671] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  207.725938] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  211.277703] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[  211.277999] sd 6:0:0:0: [sdb] Write Protect is off
[  211.278002] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[  211.281018] sd 6:0:0:0: [sdb] No Caching mode page found
[  211.281022] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  211.290773]  sdb: sdb1
[  211.290914] sd 6:0:0:0: [sdb] Attached SCSI disk
[  211.697470] ntfs3: sdb1: It is recommened to use chkdsk.
[  211.858095] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  214.956913] ntfs3: sdb1: It is recommened to use chkdsk.
[  214.979113] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  269.391717] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  269.393067] sd 6:0:0:0: [sdb] 15482880 512-byte logical blocks: (7.93 GB/7.38 GiB)
[  269.394449] sd 6:0:0:0: [sdb] Write Protect is off
[  269.394461] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  269.395773] sd 6:0:0:0: [sdb] No Caching mode page found
[  269.395780] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  269.401941]  sdb: sdb1
[  269.402089] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  373.523872] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  373.525954] sd 6:0:0:0: [sdb] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
[  373.526332] sd 6:0:0:0: [sdb] Write Protect is off
[  373.526339] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
[  373.526610] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  373.623777]  sdb: sdb1 sdb2
[  373.624377] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  511.506735] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  511.507335] sd 6:0:0:0: [sdb] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
[  511.507711] sd 6:0:0:0: [sdb] Write Protect is off
[  511.507722] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
[  511.508106] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  511.606858]  sdb: sdb1 sdb2
[  511.607414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  727.219849] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  730.264558] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[  730.264936] sd 6:0:0:0: [sdb] Write Protect is off
[  730.264947] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[  730.265192] sd 6:0:0:0: [sdb] No Caching mode page found
[  730.265202] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  730.285828]  sdb: sdb1
[  730.286222] sd 6:0:0:0: [sdb] Attached SCSI disk
[  730.731005] ntfs3: sdb1: It is recommened to use chkdsk.
[  730.830638] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  735.688036] ntfs3: sdb1: It is recommened to use chkdsk.
[  735.719304] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[ 1032.953156] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[25013.049564] sd 6:0:0:0: Attached scsi generic sg2 type 0
[25016.082987] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[25016.083172] sd 6:0:0:0: [sdb] Write Protect is off
[25016.083179] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[25016.083314] sd 6:0:0:0: [sdb] No Caching mode page found
[25016.083319] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[25016.096821]  sdb: sdb1
[25016.096997] sd 6:0:0:0: [sdb] Attached SCSI disk
[25016.589574] ntfs3: sdb1: It is recommened to use chkdsk.
[25018.471875] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25019.332519] ntfs3: sdb1: It is recommened to use chkdsk.
[25019.419680] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25021.547800] ntfs3: sdb1: It is recommened to use chkdsk.
[25021.575124] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25064.200257] sd 6:0:0:0: Attached scsi generic sg2 type 0
[25066.037504] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[25066.037822] sd 6:0:0:0: [sdb] Write Protect is off
[25066.037829] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[25066.038113] sd 6:0:0:0: [sdb] No Caching mode page found
[25066.038118] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[25066.047023]  sdb: sdb1
[25066.047336] sd 6:0:0:0: [sdb] Attached SCSI disk
[25066.451316] ntfs3: sdb1: It is recommened to use chkdsk.
[25066.559088] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[31656.872900] sd 6:0:0:0: Attached scsi generic sg2 type 0
[31659.810136] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[31659.810572] sd 6:0:0:0: [sdb] Write Protect is off
[31659.810582] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[31659.810735] sd 6:0:0:0: [sdb] No Caching mode page found
[31659.810744] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[31659.819889]  sdb: sdb1
[31659.820117] sd 6:0:0:0: [sdb] Attached SCSI disk
[31660.256317] ntfs3: sdb1: It is recommened to use chkdsk.
[31662.116212] ntfs3: sdb1: volume is dirty and "force" flag is not set!

Hors ligne

#11 Le 06/01/2024, à 18:52

inbox

Re : [Résolu] Disque externe qui ne se monte pas

[   32.020228] ntfs3: sdb1: It is recommened to use chkdsk.
[   32.115671] ntfs3: sdb1: volume is dirty and "force" flag is not set!

Ton système de fichier NTFS est abîmé. Il faut essayer de le remettre en état avec :

sudo ntfsfix /dev/sdb1

Dernière modification par inbox (Le 06/01/2024, à 18:53)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#12 Le 06/01/2024, à 18:57

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

Voici le résulat de la commande :

jp@jpt:~$ sudo ntfsfix /dev/sdb1
Mounting volume... OK
Processing of $MFT and $MFTMirr completed successfully.
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.

J'ai re-essayé de monter le disque. Il ne veut toujours pas

Hors ligne

#13 Le 06/01/2024, à 19:04

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

jp@jpt:~$ sudo dmesg | grep sd
[    0.010786] ACPI: SSDT 0x0000000078337D70 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.010790] ACPI: SSDT 0x000000007833AED0 0027FC (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.010805] ACPI: SSDT 0x000000007833EF00 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.862951] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.237449] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.237586] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.237593] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.237631] sd 0:0:0:0: [sda] Write Protect is off
[    1.237636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.237679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.237722] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    1.293144]  sda: sda1 sda4
[    1.293530] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.469459] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.469687] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[    2.469805] sd 6:0:0:0: [sdb] Write Protect is off
[    2.469807] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    2.469927] sd 6:0:0:0: [sdb] No Caching mode page found
[    2.469930] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.505046]  sdb: sdb1
[    2.505185] sd 6:0:0:0: [sdb] Attached SCSI disk
[    4.098928] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    4.100681] sd 7:0:0:0: [sdc] Media removed, stopped polling
[    4.101057] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    6.246294] EXT4-fs (sda1): mounted filesystem 2b117b42-a26f-4cad-9786-fecb7cd31ec7 r/w with ordered data mode. Quota mode: none.
[   32.020228] ntfs3: sdb1: It is recommened to use chkdsk.
[   32.115671] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  207.725938] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  211.277703] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[  211.277999] sd 6:0:0:0: [sdb] Write Protect is off
[  211.278002] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[  211.281018] sd 6:0:0:0: [sdb] No Caching mode page found
[  211.281022] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  211.290773]  sdb: sdb1
[  211.290914] sd 6:0:0:0: [sdb] Attached SCSI disk
[  211.697470] ntfs3: sdb1: It is recommened to use chkdsk.
[  211.858095] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  214.956913] ntfs3: sdb1: It is recommened to use chkdsk.
[  214.979113] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  269.391717] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  269.393067] sd 6:0:0:0: [sdb] 15482880 512-byte logical blocks: (7.93 GB/7.38 GiB)
[  269.394449] sd 6:0:0:0: [sdb] Write Protect is off
[  269.394461] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  269.395773] sd 6:0:0:0: [sdb] No Caching mode page found
[  269.395780] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  269.401941]  sdb: sdb1
[  269.402089] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  373.523872] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  373.525954] sd 6:0:0:0: [sdb] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
[  373.526332] sd 6:0:0:0: [sdb] Write Protect is off
[  373.526339] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
[  373.526610] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  373.623777]  sdb: sdb1 sdb2
[  373.624377] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  511.506735] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  511.507335] sd 6:0:0:0: [sdb] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
[  511.507711] sd 6:0:0:0: [sdb] Write Protect is off
[  511.507722] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
[  511.508106] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  511.606858]  sdb: sdb1 sdb2
[  511.607414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  727.219849] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  730.264558] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[  730.264936] sd 6:0:0:0: [sdb] Write Protect is off
[  730.264947] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[  730.265192] sd 6:0:0:0: [sdb] No Caching mode page found
[  730.265202] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  730.285828]  sdb: sdb1
[  730.286222] sd 6:0:0:0: [sdb] Attached SCSI disk
[  730.731005] ntfs3: sdb1: It is recommened to use chkdsk.
[  730.830638] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[  735.688036] ntfs3: sdb1: It is recommened to use chkdsk.
[  735.719304] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[ 1032.953156] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[25013.049564] sd 6:0:0:0: Attached scsi generic sg2 type 0
[25016.082987] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[25016.083172] sd 6:0:0:0: [sdb] Write Protect is off
[25016.083179] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[25016.083314] sd 6:0:0:0: [sdb] No Caching mode page found
[25016.083319] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[25016.096821]  sdb: sdb1
[25016.096997] sd 6:0:0:0: [sdb] Attached SCSI disk
[25016.589574] ntfs3: sdb1: It is recommened to use chkdsk.
[25018.471875] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25019.332519] ntfs3: sdb1: It is recommened to use chkdsk.
[25019.419680] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25021.547800] ntfs3: sdb1: It is recommened to use chkdsk.
[25021.575124] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[25064.200257] sd 6:0:0:0: Attached scsi generic sg2 type 0
[25066.037504] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[25066.037822] sd 6:0:0:0: [sdb] Write Protect is off
[25066.037829] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[25066.038113] sd 6:0:0:0: [sdb] No Caching mode page found
[25066.038118] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[25066.047023]  sdb: sdb1
[25066.047336] sd 6:0:0:0: [sdb] Attached SCSI disk
[25066.451316] ntfs3: sdb1: It is recommened to use chkdsk.
[25066.559088] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[31656.872900] sd 6:0:0:0: Attached scsi generic sg2 type 0
[31659.810136] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[31659.810572] sd 6:0:0:0: [sdb] Write Protect is off
[31659.810582] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[31659.810735] sd 6:0:0:0: [sdb] No Caching mode page found
[31659.810744] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[31659.819889]  sdb: sdb1
[31659.820117] sd 6:0:0:0: [sdb] Attached SCSI disk
[31660.256317] ntfs3: sdb1: It is recommened to use chkdsk.
[31662.116212] ntfs3: sdb1: volume is dirty and "force" flag is not set!
[33469.393451] sd 6:0:0:0: Attached scsi generic sg2 type 0
[33472.439809] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[33472.440127] sd 6:0:0:0: [sdb] Write Protect is off
[33472.440134] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[33472.440336] sd 6:0:0:0: [sdb] No Caching mode page found
[33472.440341] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[33472.450211]  sdb: sdb1
[33472.450399] sd 6:0:0:0: [sdb] Attached SCSI disk
[33472.901304] ntfs3: sdb1: It is recommened to use chkdsk.
[33472.995349] ntfs3: sdb1: volume is dirty and "force" flag is not set!

Hors ligne

#14 Le 06/01/2024, à 19:04

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Dans ce cas, il faut procéder à un chkdsk sous Windows.

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#15 Le 06/01/2024, à 19:08

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

Je ne comprends pas. je n'ai plus du tout Windows sur le PC qui a Kubuntu.
Sur un PC avec Windows, le disque fonctionne normalement.

Si je change de disque cela va-t-il mieux fonctionner ?

JP

Hors ligne

#16 Le 06/01/2024, à 19:27

inbox

Re : [Résolu] Disque externe qui ne se monte pas

Non. Windows considère que le système de fichier est OK alors que le système de fichier est abîmé. Il faut donc faire ce que je t'ai indiqué. Puisque tu dis que le disque se monte sous Windows, c'est que tu en as un sous la main, ou pas loin.

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#17 Le 06/01/2024, à 23:23

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

J'ai connecté le disque à un ordi sous Windows et lancé la commande chkdsk. Maintenant le disque se monte normalement sur mon ordi sous Kubuntu.
Je n'ai rien compris, mais ce n'ai pas grave.

Merci pour votre aide.

JP

Hors ligne

#18 Le 06/01/2024, à 23:39

geole

Re : [Résolu] Disque externe qui ne se monte pas

Bonsoir
Peux-tu indiquer quelle version ubuntu tu utilises

lsb_release -a

Si c'est la version 23.10, je ne suis pas surpris.

ntfs3: sdb1: volume is dirty and "force" flag is not set!

Un conseil. Sauve les données de ce disque externe et reformate-le en exfat.

Dernière modification par geole (Le 06/01/2024, à 23:45)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#19 Le 06/01/2024, à 23:45

jpt2042

Re : [Résolu] Disque externe qui ne se monte pas

Bonsoir,
C'est bien la 23.10. J'y suis passé parce que mes problèmes avaient commencés il y a presque un an et que j'espérais qu'un changement de version les résoudrait.
Je vais passer dès que possible au format  exfat.t.
Encore merci.

jp@jpt:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 23.10
Release:        23.10
Codename:       mantic

Hors ligne

Pages : 1