#101 Le 28/06/2024, à 18:27
- geole
Re : [ Résolu ] Mon disque dur me lâche ?
Bonjour.
Tu peux toujours publier un rapport smartctl du disque en question.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#102 Le 28/06/2024, à 22:25
- samcelia
Re : [ Résolu ] Mon disque dur me lâche ?
geole a écrit :
Bonjour.
Tu peux toujours publier un rapport smartctl du disque en question.
Pas bête.
Impossible d'atteindre le test avec le logiciel "disk", c'est grisé.
en ligne de commande, (https://www.malekal.com/smartctl-verifi … _du_disque)
gerard@gerard-ThinkCentre-M700:~$ sudo smartctl -i /dev/sdc
[sudo] Mot de passe de gerard :
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-36-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..76GSX
Device Model: TOSHIBA MK3276GSX
Serial Number: 42N8Y26KF
LU WWN Device Id: 5 000039 3fd10063e
Firmware Version: GS101X
User Capacity: 320072933376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jun 28 23:11:31 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
gerard@gerard-ThinkCentre-M700:~$ sudo smartctl -t short /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-36-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Fri Jun 28 23:14:32 2024 CEST
Use smartctl -X to abort test.
gerard@gerard-ThinkCentre-M700:~$ sudo smartctl -l error /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-36-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 5003 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5003 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 5a 76 44 3e 4c Error: UNC 90 sectors at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 d0 43 3e 40 00 00:57:59.663 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:57:59.663 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:57:59.663 SET FEATURES [Set transfer mode]
ef 02 00 00 00 00 00 00 00:57:59.663 SET FEATURES [Enable write cache]
ef 90 06 00 00 00 00 00 00:57:59.663 SET FEATURES [Disable SATA feature]
Error 5002 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 76 44 3e 6c Error: UNC at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 d0 43 3e 40 00 00:57:29.087 READ FPDMA QUEUED
60 00 08 d0 42 3e 40 00 00:57:29.085 READ FPDMA QUEUED
60 00 00 d0 41 3e 40 00 00:57:29.084 READ FPDMA QUEUED
60 00 08 d0 40 3e 40 00 00:57:29.083 READ FPDMA QUEUED
60 00 00 d0 3f 3e 40 00 00:57:29.081 READ FPDMA QUEUED
Error 5001 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 6b 65 bc 6a Error: WP at LBA = 0x0abc656b = 180118891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 08 28 08 00 40 00 00:31:16.301 WRITE FPDMA QUEUED
60 80 00 48 65 bc 40 00 00:31:16.300 READ FPDMA QUEUED
25 00 00 c8 65 bc 40 00 00:31:16.163 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:31:16.163 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:31:16.163 SET FEATURES [Set transfer mode]
Error 5000 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 6b 65 bc 6a Error: UNC at LBA = 0x0abc656b = 180118891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 08 48 65 bc 40 00 00:30:32.297 READ FPDMA QUEUED
60 40 00 08 65 bc 40 00 00:30:32.297 READ FPDMA QUEUED
60 20 00 e8 64 bc 40 00 00:30:32.287 READ FPDMA QUEUED
25 00 08 f0 43 3e 40 00 00:30:32.176 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:30:32.176 IDLE IMMEDIATE
Error 4999 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 76 44 3e 6c Error: WP at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 08 d0 37 31 40 00 00:30:27.657 WRITE FPDMA QUEUED
60 00 00 f0 43 3e 40 00 00:30:27.657 READ FPDMA QUEUED
25 00 00 f0 44 3e 40 00 00:30:27.521 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:30:27.521 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:30:27.521 SET FEATURES [Set transfer mode]
gerard@gerard-ThinkCentre-M700:~$ et le test complet
gerard@gerard-ThinkCentre-M700:~$ sudo smartctl --all /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-36-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..76GSX
Device Model: TOSHIBA MK3276GSX
Serial Number: 42N8Y26KF
LU WWN Device Id: 5 000039 3fd10063e
Firmware Version: GS101X
User Capacity: 320072933376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jun 28 23:20:57 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 97) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1268
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 45712
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 92
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Minutes 0x0032 021 021 000 Old_age Always - 527h+32m
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15669
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 23
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 1001
193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 50139
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 31 (Min/Max 12/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 86
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 49
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1293
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 64
222 Loaded_Hours 0x0032 037 037 000 Old_age Always - 25571
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 243
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 5003 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5003 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 5a 76 44 3e 4c Error: UNC 90 sectors at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 d0 43 3e 40 00 00:57:59.663 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:57:59.663 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:57:59.663 SET FEATURES [Set transfer mode]
ef 02 00 00 00 00 00 00 00:57:59.663 SET FEATURES [Enable write cache]
ef 90 06 00 00 00 00 00 00:57:59.663 SET FEATURES [Disable SATA feature]
Error 5002 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 76 44 3e 6c Error: UNC at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 d0 43 3e 40 00 00:57:29.087 READ FPDMA QUEUED
60 00 08 d0 42 3e 40 00 00:57:29.085 READ FPDMA QUEUED
60 00 00 d0 41 3e 40 00 00:57:29.084 READ FPDMA QUEUED
60 00 08 d0 40 3e 40 00 00:57:29.083 READ FPDMA QUEUED
60 00 00 d0 3f 3e 40 00 00:57:29.081 READ FPDMA QUEUED
Error 5001 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 6b 65 bc 6a Error: WP at LBA = 0x0abc656b = 180118891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 08 28 08 00 40 00 00:31:16.301 WRITE FPDMA QUEUED
60 80 00 48 65 bc 40 00 00:31:16.300 READ FPDMA QUEUED
25 00 00 c8 65 bc 40 00 00:31:16.163 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:31:16.163 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:31:16.163 SET FEATURES [Set transfer mode]
Error 5000 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 6b 65 bc 6a Error: UNC at LBA = 0x0abc656b = 180118891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 08 48 65 bc 40 00 00:30:32.297 READ FPDMA QUEUED
60 40 00 08 65 bc 40 00 00:30:32.297 READ FPDMA QUEUED
60 20 00 e8 64 bc 40 00 00:30:32.287 READ FPDMA QUEUED
25 00 08 f0 43 3e 40 00 00:30:32.176 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:30:32.176 IDLE IMMEDIATE
Error 4999 occurred at disk power-on lifetime: 31627 hours (1317 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 76 44 3e 6c Error: WP at LBA = 0x0c3e4476 = 205407350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 08 d0 37 31 40 00 00:30:27.657 WRITE FPDMA QUEUED
60 00 00 f0 43 3e 40 00 00:30:27.657 READ FPDMA QUEUED
25 00 00 f0 44 3e 40 00 00:30:27.521 READ DMA EXT
e1 00 0f 00 00 00 00 00 00:30:27.521 IDLE IMMEDIATE
ef 03 45 00 00 00 00 00 00:30:27.521 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 31652 -
# 2 Short offline Completed without error 00% 28899 -
# 3 Short offline Completed without error 00% 28893 -
# 4 Short offline Completed without error 00% 28864 -
# 5 Short offline Completed without error 00% 28836 -
# 6 Short offline Completed without error 00% 28806 -
# 7 Short offline Completed without error 00% 28776 -
# 8 Short offline Completed without error 00% 28748 -
# 9 Short offline Completed without error 00% 28718 -
#10 Short offline Completed without error 00% 28689 -
#11 Short offline Completed without error 00% 28659 -
#12 Short offline Completed without error 00% 28630 -
#13 Short offline Completed: read failure 00% 28600 115793643
#14 Short offline Completed: read failure 00% 28570 115793643
#15 Short offline Completed without error 00% 28540 -
#16 Short offline Completed without error 00% 28510 -
#17 Short offline Completed without error 00% 28481 -
#18 Short offline Completed without error 00% 28451 -
#19 Short offline Completed without error 00% 28422 -
#20 Short offline Completed without error 00% 28421 -
#21 Short offline Interrupted (host reset) 10% 28397 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
gerard@gerard-ThinkCentre-M700:~$ Merci, geole de m'avoir suggérer l'idée. Si j'ai bien compris les informations du site, mon disque n'est plus fiable.
Dernière modification par samcelia (Le 28/06/2024, à 22:31)
Hors ligne
#103 Le 28/06/2024, à 22:34
- geole
Re : [ Résolu ] Mon disque dur me lâche ?
Ce n'est pas obligé de le jeter, tu peux toujours t'en servir pour faire plein de bricolages temporaires.
J'ai noté.
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 49que 49 secteurs sont irremédiablement illisibles.
Je suis surpris par le contenu de cette ligne.
9 Power_On_Minutes 0x0032 021 021 000 Old_age Always - 527h+32mVisiblement, le fabricant considère que ce disque ne vaut rien du tout.
Il exprime en minutes au lieu d'heures
et considère que le disque ne vaut plus rien. 21 % de ses possibilités au bout 527 heures.
de plus Error 5003 donc 10 erreurs par heure.
Je raye ma première phrase. Il est inutilisable.
Ajout. En mieux regardant. Il ne sait même pas mesurer le temps.
Error 5002 occurred at disk power-on lifetime: 31627 hours
Dernière modification par geole (Le 28/06/2024, à 22:59)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#104 Le 29/06/2024, à 09:08
- samcelia
Re : [ Résolu ] Mon disque dur me lâche ?
Ok, merci geole. Tu confirmes ce que j'avais cru comprendre. Il est inutilisable. Je vais le jeter.
Un résumé pour ceux lisent les derniers messages:
- mon PC freezait souvent lorsque je faisais des copies sur mon disque dur externe
- Des dossiers apparaissaient et disparaissaient sur le disque dur du PC.
- On a commencé part faire des test sur le disque dur interne du PC
- Puis comme le disque dur externe faisait un bruit constant, qu'il mettait du temps à sauvegarder, on a fini par faire des tests sur ce disque dur qui s'est avéré HS.
Dernière modification par samcelia (Le 13/07/2024, à 09:21)
Hors ligne