Pages : 1
#1 Le 30/10/2024, à 18:31
- xunil2003
Lecteur de disque 1.44 Mo non reconnu
Bonjour,
Je sus sur Ubuntu 20.04
J'ai branché sur l'usb mon lecteur de disquette.
Extrait de lsusb
Bus 001 Device 017: ID 0644:0000 TEAC Corp. Floppy
Quand je le branche à l'usb, il ce met en marche
Il est impossible d'accéder au lecteur de disquette, /dev/fd0 n'existe pas
laurent@vincent-I7-9700K:~$ ls /dev/fd0
ls: impossible d'accéder à '/dev/fd0': Aucun fichier ou dossier de ce type
laurent@vincent-I7-9700K:~$
Impossible de le trouver dans le dossier /dev
laurent@vincent-I7-9700K:~$ ls /dev
autofs ecryptfs i2c-7 loop20 loop37 loop7 nvme0 sda3 stdout tty23 tty4 tty56 ttyS13 ttyS3 vboxnetctl vcsu2
block fb0 initctl loop21 loop38 loop8 nvme0n1 sda4 tty tty24 tty40 tty57 ttyS14 ttyS30 vboxusb vcsu3
bsg fd input loop22 loop39 loop9 nvme0n1p1 sdb tty0 tty25 tty41 tty58 ttyS15 ttyS31 vcs vcsu4
btrfs-control full kmsg loop23 loop4 loop-control nvme0n1p2 sdb1 tty1 tty26 tty42 tty59 ttyS16 ttyS4 vcs1 vcsu5
bus fuse log loop24 loop40 mapper nvme0n1p3 sdc tty10 tty27 tty43 tty6 ttyS17 ttyS5 vcs2 vcsu6
cdrom hidraw0 loop0 loop25 loop41 mcelog nvram sdc1 tty11 tty28 tty44 tty60 ttyS18 ttyS6 vcs3 vfio
cdrw hidraw1 loop1 loop26 loop42 media0 port sdd tty12 tty29 tty45 tty61 ttyS19 ttyS7 vcs4 vga_arbiter
char hidraw2 loop10 loop27 loop43 mei0 ppp sg0 tty13 tty3 tty46 tty62 ttyS2 ttyS8 vcs5 vhci
console hpet loop11 loop28 loop44 mem psaux sg1 tty14 tty30 tty47 tty63 ttyS20 ttyS9 vcs6 vhost-net
core hugepages loop12 loop29 loop45 mqueue ptmx sg2 tty15 tty31 tty48 tty7 ttyS21 udmabuf vcsa vhost-vsock
cpu hwrng loop13 loop3 loop46 net pts sg3 tty16 tty32 tty49 tty8 ttyS22 uhid vcsa1 video0
cpu_dma_latency i2c-0 loop14 loop30 loop47 ng0n1 random sg4 tty17 tty33 tty5 tty9 ttyS23 uinput vcsa2 video1
cuse i2c-1 loop15 loop31 loop48 null rfkill shm tty18 tty34 tty50 ttyprintk ttyS24 urandom vcsa3 zero
disk i2c-2 loop16 loop32 loop49 nvidia0 rtc snapshot tty19 tty35 tty51 ttyS0 ttyS25 usb vcsa4 zfs
dma_heap i2c-3 loop17 loop33 loop5 nvidiactl rtc0 snd tty2 tty36 tty52 ttyS1 ttyS26 userio vcsa5
dri i2c-4 loop18 loop34 loop50 nvidia-modeset sda sr0 tty20 tty37 tty53 ttyS10 ttyS27 v4l vcsa6
dvd i2c-5 loop19 loop35 loop51 nvidia-uvm sda1 stderr tty21 tty38 tty54 ttyS11 ttyS28 vboxdrv vcsu
dvdrw i2c-6 loop2 loop36 loop6 nvidia-uvm-tools sda2 stdin tty22 tty39 tty55 ttyS12 ttyS29 vboxdrvu vcsu1
laurent@vincent-I7-9700K:~$
Extrait de dmesg
[ 1047.695191] usb 1-14.3: new full-speed USB device number 12 using xhci_hcd
[ 1047.775335] usb 1-14.3: Device not responding to setup address.
[ 1047.983227] usb 1-14.3: Device not responding to setup address.
[ 1048.191170] usb 1-14.3: device not accepting address 12, error -71
[ 1052.651316] usb 1-14.3: new full-speed USB device number 15 using xhci_hcd
[ 1052.810533] usb 1-14.3: New USB device found, idVendor=0644, idProduct=0000, bcdDevice= 0.00
[ 1052.810550] usb 1-14.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1052.810558] usb 1-14.3: Product: TEAC FD-05PUB
[ 1052.810564] usb 1-14.3: Manufacturer: TEAC
[ 1052.818672] usb-storage 1-14.3:1.0: USB Mass Storage device detected
[ 1052.819306] scsi host7: usb-storage 1-14.3:1.0
[ 1054.148736] scsi 7:0:0:0: Direct-Access TEAC FD-05PUB 3000 PQ: 0 ANSI: 0 CCS
[ 1054.149302] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 1054.180665] sd 7:0:0:0: Power-on or device reset occurred
[ 1054.340725] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1054.340736] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 1054.340743] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 1054.340751] sd 7:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[ 1054.340755] sd 7:0:0:0: [sdd] 0-byte physical blocks
[ 1054.372722] sd 7:0:0:0: [sdd] Write Protect is off
[ 1054.372731] sd 7:0:0:0: [sdd] Mode Sense: 00 46 1e 00
[ 1054.404720] sd 7:0:0:0: [sdd] No Caching mode page found
[ 1054.404732] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 1054.564679] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1054.564690] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 1054.564696] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 1054.628754] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 1123.717103] usb 1-14.3: USB disconnect, device number 15
[ 1152.098022] usb 1-14.3: new full-speed USB device number 16 using xhci_hcd
[ 1152.256533] usb 1-14.3: New USB device found, idVendor=0644, idProduct=0000, bcdDevice= 0.00
[ 1152.256544] usb 1-14.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1152.256550] usb 1-14.3: Product: TEAC FD-05PUB
[ 1152.256554] usb 1-14.3: Manufacturer: TEAC
[ 1152.264901] usb-storage 1-14.3:1.0: USB Mass Storage device detected
[ 1152.266076] scsi host7: usb-storage 1-14.3:1.0
[ 1153.604791] scsi 7:0:0:0: Direct-Access TEAC FD-05PUB 3000 PQ: 0 ANSI: 0 CCS
[ 1153.605508] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 1153.636728] sd 7:0:0:0: Power-on or device reset occurred
[ 1153.796712] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1153.796722] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 1153.796728] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 1153.796736] sd 7:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[ 1153.796739] sd 7:0:0:0: [sdd] 0-byte physical blocks
[ 1153.828777] sd 7:0:0:0: [sdd] Write Protect is off
[ 1153.828790] sd 7:0:0:0: [sdd] Mode Sense: 00 46 1e 00
[ 1153.860735] sd 7:0:0:0: [sdd] No Caching mode page found
[ 1153.860746] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 1154.020766] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1154.020778] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 1154.020784] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 1154.084709] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 1161.636697] sd 7:0:0:0: [sdd] tag#0 access beyond end of device
[ 1161.636704] blk_update_request: I/O error, dev sdd, sector 2 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 0
[ 1161.636712] EXT4-fs (sdd): unable to read superblock
[ 2005.512129] floppy0: no floppy controllers found
[ 2176.645680] usb 1-14.3: USB disconnect, device number 16
[ 2183.017504] usb 1-14.3: new full-speed USB device number 17 using xhci_hcd
[ 2183.180812] usb 1-14.3: New USB device found, idVendor=0644, idProduct=0000, bcdDevice= 0.00
[ 2183.180825] usb 1-14.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2183.180831] usb 1-14.3: Product: TEAC FD-05PUB
[ 2183.180836] usb 1-14.3: Manufacturer: TEAC
[ 2183.189643] usb-storage 1-14.3:1.0: USB Mass Storage device detected
[ 2183.191025] scsi host7: usb-storage 1-14.3:1.0
[ 2184.516934] scsi 7:0:0:0: Direct-Access TEAC FD-05PUB 3000 PQ: 0 ANSI: 0 CCS
[ 2184.517719] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 2184.548872] sd 7:0:0:0: Power-on or device reset occurred
[ 2184.708935] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 2184.708949] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 2184.708959] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 2184.708971] sd 7:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[ 2184.708976] sd 7:0:0:0: [sdd] 0-byte physical blocks
[ 2184.740895] sd 7:0:0:0: [sdd] Write Protect is off
[ 2184.740908] sd 7:0:0:0: [sdd] Mode Sense: 00 46 1e 00
[ 2184.772864] sd 7:0:0:0: [sdd] No Caching mode page found
[ 2184.772872] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2184.900981] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 2184.900989] sd 7:0:0:0: [sdd] Sense Key : Medium Error [current]
[ 2184.900993] sd 7:0:0:0: [sdd] Add. Sense: Cannot read medium - unknown format
[ 2184.996981] sd 7:0:0:0: [sdd] Attached SCSI removable disk
laurent@vincent-I7-9700K:~$
Le logiciel kfloppy me retourne
Erreur interne: périphérique incorerectement défini.
Merci d'avance
Dernière modification par xunil2003 (Le 30/10/2024, à 19:27)
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne
#2 Le 30/10/2024, à 18:39
- geole
Re : Lecteur de disque 1.44 Mo non reconnu
il me semble que le lecteur de disquette est /dev/fd ou /dev/sr0
Dernière modification par geole (Le 30/10/2024, à 18:41)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#3 Le 30/10/2024, à 18:57
- xunil2003
Re : Lecteur de disque 1.44 Mo non reconnu
Bonjour,
ça ne peut pas être /dev/fd car lorsque je débranche l'usb il y est toujours.
/dev/sr0 est le lecteur DVD.
Merci.
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne
#4 Le 30/10/2024, à 19:49
- xunil2003
Re : Lecteur de disque 1.44 Mo non reconnu
re,
J'ai ajouté dans le fichier /etc/modules
floppy
puis je redémarré, rien n'a changé.
j'ai essayé aussi avec modprobe
laurent@vincent-I7-9700K:~$ sudo modprobe floppy
modprobe: ERROR: could not insert 'floppy': No such device
laurent@vincent-I7-9700K:~$
Mais je comprend pas pourquoi l'orque le lecteur de disquette n'est pas branche j'ai en périf
laurent@vincent-I7-9700K:~$ ls /dev
autofs ecryptfs i2c-7 loop20 loop37 loop6 nvidia-uvm-tools sda2 tty tty24 tty40 tty57 ttyS14 ttyS30 vboxusb vcsu3
block fb0 initctl loop21 loop38 loop7 nvme0 sda3 tty0 tty25 tty41 tty58 ttyS15 ttyS31 vcs vcsu4
bsg fd input loop22 loop39 loop8 nvme0n1 sda4 tty1 tty26 tty42 tty59 ttyS16 ttyS4 vcs1 vcsu5
btrfs-control full kmsg loop23 loop4 loop9 nvme0n1p1 sdb tty10 tty27 tty43 tty6 ttyS17 ttyS5 vcs2 vcsu6
bus fuse log loop24 loop40 loop-control nvme0n1p2 sdb1 tty11 tty28 tty44 tty60 ttyS18 ttyS6 vcs3 vfio
cdrom hidraw0 loop0 loop25 loop41 mapper nvme0n1p3 sdc tty12 tty29 tty45 tty61 ttyS19 ttyS7 vcs4 vga_arbiter
cdrw hidraw1 loop1 loop26 loop42 mcelog nvram sdc1 tty13 tty3 tty46 tty62 ttyS2 ttyS8 vcs5 vhci
char hidraw2 loop10 loop27 loop43 media0 port sg0 tty14 tty30 tty47 tty63 ttyS20 ttyS9 vcs6 vhost-net
console hpet loop11 loop28 loop44 mei0 ppp sg1 tty15 tty31 tty48 tty7 ttyS21 udmabuf vcsa vhost-vsock
core hugepages loop12 loop29 loop45 mem psaux sg2 tty16 tty32 tty49 tty8 ttyS22 uhid vcsa1 video0
cpu hwrng loop13 loop3 loop46 mqueue ptmx sg3 tty17 tty33 tty5 tty9 ttyS23 uinput vcsa2 video1
cpu_dma_latency i2c-0 loop14 loop30 loop47 net pts shm tty18 tty34 tty50 ttyprintk ttyS24 urandom vcsa3 zero
cuse i2c-1 loop15 loop31 loop48 ng0n1 random snapshot tty19 tty35 tty51 ttyS0 ttyS25 usb vcsa4 zfs
disk i2c-2 loop16 loop32 loop49 null rfkill snd tty2 tty36 tty52 ttyS1 ttyS26 userio vcsa5
dma_heap i2c-3 loop17 loop33 loop5 nvidia0 rtc sr0 tty20 tty37 tty53 ttyS10 ttyS27 v4l vcsa6
dri i2c-4 loop18 loop34 loop50 nvidiactl rtc0 stderr tty21 tty38 tty54 ttyS11 ttyS28 vboxdrv vcsu
dvd i2c-5 loop19 loop35 loop51 nvidia-modeset sda stdin tty22 tty39 tty55 ttyS12 ttyS29 vboxdrvu vcsu1
dvdrw i2c-6 loop2 loop36 loop52 nvidia-uvm sda1 stdout tty23 tty4 tty56 ttyS13 ttyS3 vboxnetctl vcsu2
laurent@vincent-I7-9700K:~$
laurent@vincent-I7-9700K:~$ ls -l /dev | wc -l
284
laurent@vincent-I7-9700K:~$
et lorsque je le connecte a l'usb j'ai 2 perif en plus
laurent@vincent-I7-9700K:~$ ls /dev
autofs fb0 input loop23 loop40 mapper nvram sdd tty13 tty30 tty48 tty8 ttyS23 urandom vcsa4
block fd kmsg loop24 loop41 mcelog port sg0 tty14 tty31 tty49 tty9 ttyS24 usb vcsa5
bsg full log loop25 loop42 media0 ppp sg1 tty15 tty32 tty5 ttyprintk ttyS25 userio vcsa6
btrfs-control fuse loop0 loop26 loop43 mei0 psaux sg2 tty16 tty33 tty50 ttyS0 ttyS26 v4l vcsu
bus hidraw0 loop1 loop27 loop44 mem ptmx sg3 tty17 tty34 tty51 ttyS1 ttyS27 vboxdrv vcsu1
cdrom hidraw1 loop10 loop28 loop45 mqueue pts sg4 tty18 tty35 tty52 ttyS10 ttyS28 vboxdrvu vcsu2
cdrw hidraw2 loop11 loop29 loop46 net random shm tty19 tty36 tty53 ttyS11 ttyS29 vboxnetctl vcsu3
char hpet loop12 loop3 loop47 ng0n1 rfkill snapshot tty2 tty37 tty54 ttyS12 ttyS3 vboxusb vcsu4
console hugepages loop13 loop30 loop48 null rtc snd tty20 tty38 tty55 ttyS13 ttyS30 vcs vcsu5
core hwrng loop14 loop31 loop49 nvidia0 rtc0 sr0 tty21 tty39 tty56 ttyS14 ttyS31 vcs1 vcsu6
cpu i2c-0 loop15 loop32 loop5 nvidiactl sda stderr tty22 tty4 tty57 ttyS15 ttyS4 vcs2 vfio
cpu_dma_latency i2c-1 loop16 loop33 loop50 nvidia-modeset sda1 stdin tty23 tty40 tty58 ttyS16 ttyS5 vcs3 vga_arbiter
cuse i2c-2 loop17 loop34 loop51 nvidia-uvm sda2 stdout tty24 tty41 tty59 ttyS17 ttyS6 vcs4 vhci
disk i2c-3 loop18 loop35 loop52 nvidia-uvm-tools sda3 tty tty25 tty42 tty6 ttyS18 ttyS7 vcs5 vhost-net
dma_heap i2c-4 loop19 loop36 loop6 nvme0 sda4 tty0 tty26 tty43 tty60 ttyS19 ttyS8 vcs6 vhost-vsock
dri i2c-5 loop2 loop37 loop7 nvme0n1 sdb tty1 tty27 tty44 tty61 ttyS2 ttyS9 vcsa video0
dvd i2c-6 loop20 loop38 loop8 nvme0n1p1 sdb1 tty10 tty28 tty45 tty62 ttyS20 udmabuf vcsa1 video1
dvdrw i2c-7 loop21 loop39 loop9 nvme0n1p2 sdc tty11 tty29 tty46 tty63 ttyS21 uhid vcsa2 zero
ecryptfs initctl loop22 loop4 loop-control nvme0n1p3 sdc1 tty12 tty3 tty47 tty7 ttyS22 uinput vcsa3 zfs
laurent@vincent-I7-9700K:~$
laurent@vincent-I7-9700K:~$ ls -l /dev | wc -l
286
laurent@vincent-I7-9700K:~$
il y a /dev/sdd en plus
laurent@vincent-I7-9700K:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 4K 1 loop /snap/bare/5
loop1 7:1 0 174,2M 1 loop /snap/brave/450
loop2 7:2 0 174,2M 1 loop /snap/brave/452
loop3 7:3 0 172,4M 1 loop /snap/chromium/2985
loop4 7:4 0 172,3M 1 loop /snap/chromium/2980
loop5 7:5 0 104M 1 loop /snap/core/16928
loop6 7:6 0 55,4M 1 loop /snap/core18/2846
loop7 7:7 0 232,5M 1 loop /snap/dosbox-x/1261
loop8 7:8 0 229,1M 1 loop /snap/dosbox-x/1350
loop9 7:9 0 349,7M 1 loop /snap/gnome-3-38-2004/143
loop10 7:10 0 349,7M 1 loop /snap/gnome-3-38-2004/140
loop11 7:11 0 55,7M 1 loop /snap/core18/2829
loop12 7:12 0 104,2M 1 loop /snap/core/17200
loop13 7:13 0 73,9M 1 loop /snap/core22/1663
loop14 7:14 0 63,7M 1 loop /snap/core20/2434
loop15 7:15 0 64M 1 loop /snap/core20/2379
loop16 7:16 0 67,8M 1 loop /snap/cups/1058
loop17 7:17 0 74,3M 1 loop /snap/core22/1621
loop18 7:18 0 67,8M 1 loop /snap/cups/1067
loop19 7:19 0 10,1M 1 loop /snap/epsxe/1
loop20 7:20 0 164,8M 1 loop /snap/gnome-3-28-1804/198
loop21 7:21 0 504,2M 1 loop /snap/gnome-42-2204/172
loop22 7:22 0 65,3M 1 loop /snap/gearboy/163
loop23 7:23 0 164,8M 1 loop /snap/gnome-3-28-1804/194
loop24 7:24 0 505,1M 1 loop /snap/gnome-42-2204/176
loop25 7:25 0 65,2M 1 loop /snap/gtk-common-themes/1519
loop26 7:26 0 63,6M 1 loop /snap/handbrake-jz/142
loop27 7:27 0 91,7M 1 loop /snap/gtk-common-themes/1535
loop28 7:28 0 289,8M 1 loop /snap/kde-frameworks-5-core18/35
loop29 7:29 0 437,2M 1 loop /snap/kde-frameworks-5-98-qt-5-15-6-core20/9
loop30 7:30 0 436,3M 1 loop /snap/kde-frameworks-5-96-qt-5-15-5-core20/7
loop31 7:31 0 260,7M 1 loop /snap/kde-frameworks-5-core18/32
loop32 7:32 0 448,9M 1 loop /snap/kf5-5-105-qt-5-15-9-core22/11
loop33 7:33 0 448,9M 1 loop /snap/kf5-5-106-qt-5-15-9-core22/23
loop34 7:34 0 424,2M 1 loop /snap/kde-frameworks-5-qt-5-15-3-core20/8
loop35 7:35 0 448,8M 1 loop /snap/kf5-5-105-qt-5-15-9-core22/9
loop36 7:36 0 450,2M 1 loop /snap/kf5-5-108-qt-5-15-10-core22/5
loop37 7:37 0 322,9M 1 loop /snap/makemkv/624
loop38 7:38 0 438,3M 1 loop /snap/kf5-5-110-qt-5-15-11-core22/3
loop39 7:39 0 412K 1 loop /snap/kfloppy/4
loop40 7:40 0 16,7M 1 loop /snap/kpat/85
loop41 7:41 0 325,1M 1 loop /snap/makemkv/627
loop42 7:42 0 16,7M 1 loop /snap/kpat/87
loop43 7:43 0 103,2M 1 loop /snap/krop/159
loop44 7:44 0 79,6M 1 loop /snap/matroska-tools/19
loop45 7:45 0 8,9M 1 loop /snap/pdfmixtool/864
loop46 7:46 0 206,4M 1 loop /snap/rpi-imager/606
loop47 7:47 0 46,5M 1 loop /snap/rnote/58
loop48 7:48 0 207,2M 1 loop /snap/rpi-imager/630
loop49 7:49 0 38,8M 1 loop /snap/snapd/21465
loop50 7:50 0 38,8M 1 loop /snap/snapd/21759
loop51 7:51 0 42,8M 1 loop /snap/solitaire/5
sda 8:0 0 1,8T 0 disk
├─sda1 8:1 0 100M 0 part
├─sda2 8:2 0 16M 0 part
├─sda3 8:3 0 1,8T 0 part
└─sda4 8:4 0 543M 0 part
sdb 8:16 0 1,8T 0 disk
└─sdb1 8:17 0 1,8T 0 part /home
sdc 8:32 0 1,8T 0 disk
└─sdc1 8:33 0 1,8T 0 part
sr0 11:0 1 1024M 0 rom
nvme0n1 259:0 0 232,9G 0 disk
├─nvme0n1p1 259:1 0 512M 0 part /boot/efi
├─nvme0n1p2 259:2 0 30,3G 0 part [SWAP]
└─nvme0n1p3 259:3 0 202,1G 0 part /
laurent@vincent-I7-9700K:~$
laurent@vincent-I7-9700K:~$ sudo mount /dev/sdd /mnt
[sudo] Mot de passe de laurent :
mount: /mnt: impossible de lire le superbloc à l’adresse /dev/sdd.
laurent@vincent-I7-9700K:~$
Quand je clique sur disquette dans le gestionnaire de fichier, il m'affiche
Une erreur est survenue en accédant à « Disquette ». Le système a répondu :L'opération demandée a échoué: Error mounting /dev/sdd at /media/laurent/disk: can't read superblock on /dev/sdd
Merci.
Dernière modification par xunil2003 (Le 31/10/2024, à 20:15)
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne