Pages : 1
#1 Le 15/11/2024, à 15:50
- papyreno
[Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
Hello !
J'ai récemment décidé d'installer Ubuntu 24.04.1 sur mon laptop HP Spectre x360 14-eu0010nf en dual boot avec Windows 11.
Je suis vraiment séduit par cet OS mais je rencontre un problème de wifi qui vient gâcher la lune de miel Le wifi fonctionne parfaitement après démarrage mais ne se reconnecte plus et ne trouve aucun réseau après être sorti de veille (mise en veille en fermant le capot ou par le menu de démarrage).
Le seul moyen de le faire refonctionner est de redémarrer, ce qui n'est pas top...
Captures d'écran quand le wifi fonctionne:
Voici le résultat du script wificheck trouvé ici: https://forum.ubuntu-fr.org/viewtopic.p … 083463&p=3
Quand le wifi fonctionne:
###############################################
########### Wifi Check ##################
########### 2024-11-15 ##################
###############################################
##### Current kernel, release, desktop ######
Current Kernel : 6.8.0-48-generic
Release Description: Ubuntu 24.04.1 LTS
Current Desktop : ubuntu:GNOME
################ nmcli #################
wlo1: connecté à Bbox-xxxxxxxx
"Intel Wi-Fi"
wifi (iwlwifi), 28:A0:6B:BD:21:C6, hw, mtu 1500
ip4 par défaut, ip6 par défaut
inet4 192.168.1.183/24
route4 192.168.1.0/24 metric 600
route4 default via 192.168.1.254 metric 600
inet6 2001:861:8c96:2970:9d68:7f47:512b:f4d4/64
inet6 2001:861:8c96:2970:6560:db88:ff1a:e079/64
inet6 fe80::8db6:7c16:ca5c:8287/64
route6 fe80::/64 metric 1024
route6 2001:861:8c96:2970::/64 metric 600
route6 default via fe80::366b:46ff:fe76:f2bc metric 600
lo: connecté (en externe) à lo
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
inet4 127.0.0.1/8
inet6 ::1/128
p2p-dev-wlo1: déconnecté
"p2p-dev-wlo1"
wifi-p2p, hw
DNS configuration:
servers: 9.9.9.9 149.112.112.112
interface: wlo1
servers: 2001:861:8c96:2970:366b:46ff:fe76:f2bc
domains: lan
interface: wlo1
############## iw dev ####################
phy#0
Unnamed/non-netdev interface
wdev 0x2
addr 28:a0:6b:bd:21:c7
type P2P-device
Interface wlo1
ifindex 2
wdev 0x1
addr 28:a0:6b:bd:21:c6
ssid Bbox-xxxxxxxx
type managed
channel 100 (5500 MHz), width: 80 MHz, center1: 5530 MHz
txpower 22.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 0 0 0 0 0 0 0
########### nmcli dev wifi ##############
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
34:6B:46:76:F2:B0 Bbox-xxxxxxxx Infra 11 130 Mbit/s 97 ▂▄▆█ WPA1 WPA2
* 34:6B:46:76:F2:B4 Bbox-xxxxxxxx Infra 100 540 Mbit/s 92 ▂▄▆█ WPA1 WPA2
58:2F:F7:3C:C3:20 Bbox-D96F2B14 Infra 11 130 Mbit/s 67 ▂▄▆_ WPA1 WPA2
58:2F:F7:3C:C3:24 Bbox-D96F2B14 Infra 100 540 Mbit/s 50 ▂▄__ WPA1 WPA2
18:6A:81:7F:04:20 Livebox-0420 Infra 1 130 Mbit/s 45 ▂▄__ WPA2
FC:3F:DB:19:73:52 DIRECT-51-HP ENVY 5540 series Infra 6 65 Mbit/s 45 ▂▄__ WPA2
90:4D:4A:F4:E1:30 Livebox-E130 Infra 1 195 Mbit/s 42 ▂▄__ WPA2
8C:97:EA:F1:C6:A8 Freebox-A02753 Infra 11 130 Mbit/s 34 ▂▄__ WPA2
3A:07:16:55:F0:81 fbx-G7YZTA52XOCTH55HDG3O4UKIMNW Mesh 1 270 Mbit/s 30 ▂___ WPA3
6E:D8:A7:2E:C5:0A iPhone de martin pecheur Infra 6 130 Mbit/s 27 ▂___ WPA2 WPA3
2C:93:FB:3A:A3:C8 Livebox-A3C0 Infra 6 405 Mbit/s 24 ▂___ WPA2
B0:BB:E5:08:FE:60 Bbox-C4529CD9 Infra 1 130 Mbit/s 22 ▂___ WPA1 WPA2
2C:93:FB:3A:A3:C0 Livebox-A3C0 Infra 100 540 Mbit/s 22 ▂___ WPA2
10:DA:43:95:D1:6A Livebox-E130_2GEXT Infra 1 130 Mbit/s 20 ▂___ WPA1 WPA2
38:63:BB:D4:0F:35 DIRECT-34-HP ENVY 5640 series Infra 6 65 Mbit/s 19 ▂___ WPA2
E4:75:DC:02:D9:B8 Livebox-D9B8 Infra 1 130 Mbit/s 15 ▂___ WPA2
10:E9:92:0D:39:90 Livebox-3990 Infra 11 130 Mbit/s 15 ▂___ WPA2
################ lsusb ################
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 06cb:016c Synaptics, Inc.
Bus 003 Device 003: ID 8087:0036 Intel Corp.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
####### lspci -k -nn | grep -A 3 -i net ######
01:00.0 Network controller [0280]: Intel Corporation Wi-Fi 7(802.11be) AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2 [8086:272b] (rev 1a)
DeviceName: Intel Wi-Fi 7 BE200 + BT
Subsystem: Intel Corporation BE200 320MHz [Gale Peak] [8086:00f4]
Kernel driver in use: iwlwifi
####### lsmod | grep <wifi_modules> #######
Module Size Used by
cfg80211 1323008 3 iwlmvm,iwlwifi,mac80211
iwlmvm 868352 0
iwlwifi 598016 1 iwlmvm
mac80211 1720320 1 iwlmvm
################# dkms status ###############
ipu6-drivers/0~git202406240945.aecec2aa-0ubuntu2~24.04.1, 6.8.0-48-generic, x86_64: installed
######### mokutil --sb-state #############
SecureBoot disabled
########## sudo rfkill list #############
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
################ ping no-DNS ###################
ping gateway ipv4 : ok
ping gateway ipv6 : bad !
ping cloudflare ipv4 : ok
ping cloudflare ipv6 : ok
########### sudo ufw status #############
État : inactif
######### resolvectl | grep Server #########
Current DNS Server: 9.9.9.9
DNS Servers: 9.9.9.9 149.112.112.112
###### cat /etc/network/interfaces #######
# ce fichier est obsolète sauf si vous savez ce que vous faîtes #
cat: /etc/network/interfaces: Aucun fichier ou dossier de ce nom
######## sudo lshw -C network #########
*-network
description: Ethernet interface
produit: Wi-Fi 7(802.11be) AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2
fabricant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: wlo1
version: 1a
numéro de série: 28:a0:6b:bd:21:c6
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical
configuration : broadcast=yes driver=iwlwifi driverversion=6.8.0-48-generic firmware=86.fb5c9aeb.0 gl-c0-fm-c0-86.uc ip=192.168.1.183 latency=0 link=yes multicast=yes
ressources : irq:16 mémoire:8c100000-8c103fff
######## PCMCIA card info #############
################ ip a ###################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 28:a0:6b:bd:21:c6 brd ff:ff:ff:ff:ff:ff
altname wlp1s0f0
inet 192.168.1.183/24 brd 192.168.1.255 scope global dynamic noprefixroute wlo1
valid_lft 86314sec preferred_lft 86314sec
inet6 2001:861:8c96:2970:9d68:7f47:512b:f4d4/64 scope global temporary dynamic
valid_lft 86316sec preferred_lft 14316sec
inet6 2001:861:8c96:2970:6560:db88:ff1a:e079/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 86316sec preferred_lft 14316sec
inet6 fe80::8db6:7c16:ca5c:8287/64 scope link noprefixroute
valid_lft forever preferred_lft forever
####### modinfo <wifi_modules> |grep parm #######
Modules parm for cfg80211 :
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
Modules parm for iwlmvm :
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)
Modules parm for iwlwifi :
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: nvm_file:NVM file name (charp)
parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm: enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16) (uint)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
parm: disable_11ac:Disable VHT capabilities (default: false) (bool)
parm: remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool)
parm: disable_11ax:Disable HE capabilities (default: false) (bool)
parm: disable_11be:Disable EHT capabilities (default: false) (bool)
Modules parm for mac80211 :
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
####### systemctl list network units #########
cloud-init-local.service loaded inactive dead Cloud-init: Local Stage (pre-network)
cloud-init.service loaded inactive dead Cloud-init: Network Stage
networkd-dispatcher.service loaded inactive dead Dispatcher daemon for systemd-networkd
● networking.service not-found inactive dead networking.service
NetworkManager-wait-online.service loaded active exited Network Manager Wait Online
NetworkManager.service loaded active running Network Manager
systemd-networkd-wait-online.service loaded inactive dead Wait for Network to be Configured
systemd-networkd.service loaded inactive dead Network Configuration
systemd-resolved.service loaded active running Network Name Resolution
systemd-timesyncd.service loaded active running Network Time Synchronization
wpa_supplicant.service loaded active running WPA supplicant
######## nmcli connection show ###########
NAME UUID TYPE DEVICE
Bbox-xxxxxxxx 14c385d6-c4ad-4065-8cbf-c2d827d32175 wifi wlo1
lo 395c9300-247b-4c5e-bed1-e85b65e06cb4 loopback lo
Nothing Phone (2) Renaud 3e4d9bba-747e-4b7e-a60c-09efb0d26f81 wifi --
######### nmcli -f all d show wlo1 #############
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/2
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: --
GENERAL.DRIVER: iwlwifi
GENERAL.DRIVER-VERSION: 6.8.0-48-generic
GENERAL.FIRMWARE-VERSION: 86.fb5c9aeb.0 gl-c0-fm-c0-86.uc
GENERAL.HWADDR: 28:A0:6B:BD:21:C6
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connecté)
GENERAL.REASON: 0 (Aucun raison donnée)
GENERAL.IP4-CONNECTIVITY: 4 (plein)
GENERAL.IP6-CONNECTIVITY: 4 (plein)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:06.0/0000:01:00.0/net/wlo1
GENERAL.PATH: pci-0000:01:00.0
GENERAL.IP-IFACE: wlo1
GENERAL.IS-SOFTWARE: non
GENERAL.NM-MANAGED: oui
GENERAL.AUTOCONNECT: oui
GENERAL.FIRMWARE-MISSING: non
GENERAL.NM-PLUGIN-MISSING: non
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Bbox-xxxxxxxx
GENERAL.CON-UUID: 14c385d6-c4ad-4065-8cbf-c2d827d32175
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.METERED: non (deviné)
CAPABILITIES.CARRIER-DETECT: non
CAPABILITIES.SPEED: 234 Mb/s
CAPABILITIES.IS-SOFTWARE: non
CAPABILITIES.SRIOV: non
INTERFACE-FLAGS.UP: oui
INTERFACE-FLAGS.LOWER-UP: oui
INTERFACE-FLAGS.CARRIER: oui
INTERFACE-FLAGS.PROMISC: non
WIFI-PROPERTIES.WEP: oui
WIFI-PROPERTIES.WPA: oui
WIFI-PROPERTIES.WPA2: oui
WIFI-PROPERTIES.TKIP: oui
WIFI-PROPERTIES.CCMP: oui
WIFI-PROPERTIES.AP: oui
WIFI-PROPERTIES.ADHOC: oui
WIFI-PROPERTIES.2GHZ: oui
WIFI-PROPERTIES.5GHZ: oui
WIFI-PROPERTIES.6GHZ: non
WIFI-PROPERTIES.MESH: non
WIFI-PROPERTIES.IBSS-RSN: oui
AP[1].IN-USE:
AP[1].BSSID: 34:6B:46:76:F2:B0
AP[1].SSID: Bbox-xxxxxxxx
AP[1].MODE: Infra
AP[1].CHAN: 11
AP[1].RATE: 130 Mbit/s
AP[1].SIGNAL: 97
AP[1].BARS: ▂▄▆█
AP[1].SECURITY: WPA1 WPA2
AP[2].IN-USE: *
AP[2].BSSID: 34:6B:46:76:F2:B4
AP[2].SSID: Bbox-xxxxxxxx
AP[2].MODE: Infra
AP[2].CHAN: 100
AP[2].RATE: 540 Mbit/s
AP[2].SIGNAL: 92
AP[2].BARS: ▂▄▆█
AP[2].SECURITY: WPA1 WPA2
AP[3].IN-USE:
AP[3].BSSID: 58:2F:F7:3C:C3:20
AP[3].SSID: Bbox-D96F2B14
AP[3].MODE: Infra
AP[3].CHAN: 11
AP[3].RATE: 130 Mbit/s
AP[3].SIGNAL: 67
AP[3].BARS: ▂▄▆_
AP[3].SECURITY: WPA1 WPA2
AP[4].IN-USE:
AP[4].BSSID: 58:2F:F7:3C:C3:24
AP[4].SSID: Bbox-D96F2B14
AP[4].MODE: Infra
AP[4].CHAN: 100
AP[4].RATE: 540 Mbit/s
AP[4].SIGNAL: 50
AP[4].BARS: ▂▄__
AP[4].SECURITY: WPA1 WPA2
AP[5].IN-USE:
AP[5].BSSID: 18:6A:81:7F:04:20
AP[5].SSID: Livebox-0420
AP[5].MODE: Infra
AP[5].CHAN: 1
AP[5].RATE: 130 Mbit/s
AP[5].SIGNAL: 45
AP[5].BARS: ▂▄__
AP[5].SECURITY: WPA2
AP[6].IN-USE:
AP[6].BSSID: FC:3F:DB:19:73:52
AP[6].SSID: DIRECT-51-HP ENVY 5540 series
AP[6].MODE: Infra
AP[6].CHAN: 6
AP[6].RATE: 65 Mbit/s
AP[6].SIGNAL: 45
AP[6].BARS: ▂▄__
AP[6].SECURITY: WPA2
AP[7].IN-USE:
AP[7].BSSID: 90:4D:4A:F4:E1:30
AP[7].SSID: Livebox-E130
AP[7].MODE: Infra
AP[7].CHAN: 1
AP[7].RATE: 195 Mbit/s
AP[7].SIGNAL: 42
AP[7].BARS: ▂▄__
AP[7].SECURITY: WPA2
AP[8].IN-USE:
AP[8].BSSID: 8C:97:EA:F1:C6:A8
AP[8].SSID: Freebox-A02753
AP[8].MODE: Infra
AP[8].CHAN: 11
AP[8].RATE: 130 Mbit/s
AP[8].SIGNAL: 34
AP[8].BARS: ▂▄__
AP[8].SECURITY: WPA2
AP[9].IN-USE:
AP[9].BSSID: 3A:07:16:55:F0:81
AP[9].SSID: fbx-G7YZTA52XOCTH55HDG3O4UKIMNW
AP[9].MODE: Mesh
AP[9].CHAN: 1
AP[9].RATE: 270 Mbit/s
AP[9].SIGNAL: 30
AP[9].BARS: ▂___
AP[9].SECURITY: WPA3
AP[10].IN-USE:
AP[10].BSSID: 6E:D8:A7:2E:C5:0A
AP[10].SSID: iPhone de martin pecheur
AP[10].MODE: Infra
AP[10].CHAN: 6
AP[10].RATE: 130 Mbit/s
AP[10].SIGNAL: 27
AP[10].BARS: ▂___
AP[10].SECURITY: WPA2 WPA3
AP[11].IN-USE:
AP[11].BSSID: 2C:93:FB:3A:A3:C8
AP[11].SSID: Livebox-A3C0
AP[11].MODE: Infra
AP[11].CHAN: 6
AP[11].RATE: 405 Mbit/s
AP[11].SIGNAL: 24
AP[11].BARS: ▂___
AP[11].SECURITY: WPA2
AP[12].IN-USE:
AP[12].BSSID: B0:BB:E5:08:FE:60
AP[12].SSID: Bbox-C4529CD9
AP[12].MODE: Infra
AP[12].CHAN: 1
AP[12].RATE: 130 Mbit/s
AP[12].SIGNAL: 22
AP[12].BARS: ▂___
AP[12].SECURITY: WPA1 WPA2
AP[13].IN-USE:
AP[13].BSSID: 2C:93:FB:3A:A3:C0
AP[13].SSID: Livebox-A3C0
AP[13].MODE: Infra
AP[13].CHAN: 100
AP[13].RATE: 540 Mbit/s
AP[13].SIGNAL: 22
AP[13].BARS: ▂___
AP[13].SECURITY: WPA2
AP[14].IN-USE:
AP[14].BSSID: 10:DA:43:95:D1:6A
AP[14].SSID: Livebox-E130_2GEXT
AP[14].MODE: Infra
AP[14].CHAN: 1
AP[14].RATE: 130 Mbit/s
AP[14].SIGNAL: 20
AP[14].BARS: ▂___
AP[14].SECURITY: WPA1 WPA2
AP[15].IN-USE:
AP[15].BSSID: 38:63:BB:D4:0F:35
AP[15].SSID: DIRECT-34-HP ENVY 5640 series
AP[15].MODE: Infra
AP[15].CHAN: 6
AP[15].RATE: 65 Mbit/s
AP[15].SIGNAL: 19
AP[15].BARS: ▂___
AP[15].SECURITY: WPA2
AP[16].IN-USE:
AP[16].BSSID: E4:75:DC:02:D9:B8
AP[16].SSID: Livebox-D9B8
AP[16].MODE: Infra
AP[16].CHAN: 1
AP[16].RATE: 130 Mbit/s
AP[16].SIGNAL: 15
AP[16].BARS: ▂___
AP[16].SECURITY: WPA2
AP[17].IN-USE:
AP[17].BSSID: 10:E9:92:0D:39:90
AP[17].SSID: Livebox-3990
AP[17].MODE: Infra
AP[17].CHAN: 11
AP[17].RATE: 130 Mbit/s
AP[17].SIGNAL: 15
AP[17].BARS: ▂___
AP[17].SECURITY: WPA2
IP4.ADDRESS[1]: 192.168.1.183/24
IP4.GATEWAY: 192.168.1.254
IP4.ROUTE[1]: dst = 192.168.1.0/24, nh = 0.0.0.0, mt = 600
IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 192.168.1.254, mt = 600
IP4.DNS[1]: 9.9.9.9
IP4.DNS[2]: 149.112.112.112
DHCP4.OPTION[1]: broadcast_address = 192.168.1.255
DHCP4.OPTION[2]: dhcp_client_identifier = 01:28:a0:6b:bd:21:c6
DHCP4.OPTION[3]: dhcp_lease_time = 86400
DHCP4.OPTION[4]: dhcp_server_identifier = 192.168.1.254
DHCP4.OPTION[5]: domain_name = lan
DHCP4.OPTION[6]: domain_name_servers = 192.168.1.254 1.1.1.1 9.9.9.9
DHCP4.OPTION[7]: expiry = 1731767218
DHCP4.OPTION[8]: host_name = HP-Spectre-x360
DHCP4.OPTION[9]: interface_mtu = 1500
DHCP4.OPTION[10]: ip_address = 192.168.1.183
DHCP4.OPTION[11]: next_server = 192.168.1.254
DHCP4.OPTION[12]: requested_broadcast_address = 1
DHCP4.OPTION[13]: requested_domain_name = 1
DHCP4.OPTION[14]: requested_domain_name_servers = 1
DHCP4.OPTION[15]: requested_domain_search = 1
DHCP4.OPTION[16]: requested_host_name = 1
DHCP4.OPTION[17]: requested_interface_mtu = 1
DHCP4.OPTION[18]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[19]: requested_nis_domain = 1
DHCP4.OPTION[20]: requested_nis_servers = 1
DHCP4.OPTION[21]: requested_ntp_servers = 1
DHCP4.OPTION[22]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[23]: requested_root_path = 1
DHCP4.OPTION[24]: requested_routers = 1
DHCP4.OPTION[25]: requested_static_routes = 1
DHCP4.OPTION[26]: requested_subnet_mask = 1
DHCP4.OPTION[27]: requested_time_offset = 1
DHCP4.OPTION[28]: requested_wpad = 1
DHCP4.OPTION[29]: routers = 192.168.1.254
DHCP4.OPTION[30]: subnet_mask = 255.255.255.0
IP6.ADDRESS[1]: 2001:861:8c96:2970:9d68:7f47:512b:f4d4/64
IP6.ADDRESS[2]: 2001:861:8c96:2970:6560:db88:ff1a:e079/64
IP6.ADDRESS[3]: fe80::8db6:7c16:ca5c:8287/64
IP6.GATEWAY: fe80::366b:46ff:fe76:f2bc
IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 1024
IP6.ROUTE[2]: dst = 2001:861:8c96:2970::/64, nh = ::, mt = 600
IP6.ROUTE[3]: dst = ::/0, nh = fe80::366b:46ff:fe76:f2bc, mt = 600
IP6.DNS[1]: 2001:861:8c96:2970:366b:46ff:fe76:f2bc
IP6.SEARCHES[1]: lan
DHCP6.OPTION[1]: dhcp6_client_id = 00:04:2d:4c:fe:3a:99:3a:56:c0:ab:6f:ae:8c:53:68:89:ac
DHCP6.OPTION[2]: dhcp6_domain_search = lan
DHCP6.OPTION[3]: dhcp6_name_servers = 2001:861:8c96:2970:366b:46ff:fe76:f2bc
DHCP6.OPTION[4]: iaid = 2b:db:95:11
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/1
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 14c385d6-c4ad-4065-8cbf-c2d827d32175 | Bbox-xxxxxxxx
######### iw dev wlo1 link #############
Connected to 34:6b:46:76:f2:b4 (on wlo1)
SSID: Bbox-xxxxxxxx
freq: 5500.0
RX: 237642 bytes (472 packets)
TX: 27154 bytes (206 packets)
signal: -38 dBm
rx bitrate: 650.0 MBit/s VHT-MCS 7 80MHz short GI VHT-NSS 2
tx bitrate: 234.0 MBit/s VHT-MCS 3 80MHz VHT-NSS 2
bss flags: short-preamble short-slot-time
dtim period: 1
beacon int: 100
Quand le wifi ne fonctionne plus en sortie de veille:
###############################################
########### Wifi Check ##################
########### 2024-11-15 ##################
###############################################
##### Current kernel, release, desktop ######
Current Kernel : 6.8.0-48-generic
Release Description: Ubuntu 24.04.1 LTS
Current Desktop : ubuntu:GNOME
################ nmcli #################
lo: connecté (en externe) à lo
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
inet4 127.0.0.1/8
inet6 ::1/128
wlo1: indisponible
"Intel Wi-Fi"
wifi (iwlwifi), 28:A0:6B:BD:21:C6, hw, mtu 1500
p2p-dev-wlo1: indisponible
"p2p-dev-wlo1"
wifi-p2p, hw
############## iw dev ####################
phy#0
Interface wlo1
ifindex 2
wdev 0x1
addr 28:a0:6b:bd:21:c6
type managed
txpower 22.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 0 0 0 0 0 0 0
########### nmcli dev wifi ##############
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
################ lsusb ################
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 06cb:016c Synaptics, Inc.
Bus 003 Device 003: ID 8087:0036 Intel Corp.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
####### lspci -k -nn | grep -A 3 -i net ######
01:00.0 Network controller [0280]: Intel Corporation Wi-Fi 7(802.11be) AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2 [8086:272b] (rev 1a)
DeviceName: Intel Wi-Fi 7 BE200 + BT
Subsystem: Intel Corporation BE200 320MHz [Gale Peak] [8086:00f4]
Kernel driver in use: iwlwifi
####### lsmod | grep <wifi_modules> #######
Module Size Used by
cfg80211 1323008 3 iwlmvm,iwlwifi,mac80211
iwlmvm 868352 0
iwlwifi 598016 1 iwlmvm
mac80211 1720320 1 iwlmvm
################# dkms status ###############
ipu6-drivers/0~git202406240945.aecec2aa-0ubuntu2~24.04.1, 6.8.0-48-generic, x86_64: installed
######### mokutil --sb-state #############
SecureBoot disabled
########## sudo rfkill list #############
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
################ ping no-DNS ###################
ping gateway ipv4 : bad !
ping gateway ipv6 : bad !
ping cloudflare ipv4 : bad !
ping cloudflare ipv6 : bad !
########### sudo ufw status #############
État : inactif
######### resolvectl | grep Server #########
###### cat /etc/network/interfaces #######
# ce fichier est obsolète sauf si vous savez ce que vous faîtes #
cat: /etc/network/interfaces: Aucun fichier ou dossier de ce nom
######## sudo lshw -C network #########
*-generic DÉSACTIVÉ
description: Ethernet interface
produit: Wi-Fi 7(802.11be) AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2
fabricant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: wlo1
version: ff
numéro de série: 28:a0:6b:bd:21:c6
bits: 32 bits
horloge: 66MHz
fonctionnalités: bus_master vga_palette cap_list ethernet physical
configuration : broadcast=yes driver=iwlwifi driverversion=6.8.0-48-generic firmware=86.fb5c9aeb.0 gl-c0-fm-c0-86.uc latency=255 link=no maxlatency=255 mingnt=255 multicast=yes
ressources : irq:16 mémoire:8c100000-8c103fff
######## PCMCIA card info #############
################ ip a ###################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 28:a0:6b:bd:21:c6 brd ff:ff:ff:ff:ff:ff
altname wlp1s0f0
####### modinfo <wifi_modules> |grep parm #######
Modules parm for cfg80211 :
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
Modules parm for iwlmvm :
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)
Modules parm for iwlwifi :
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: nvm_file:NVM file name (charp)
parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm: enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16) (uint)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
parm: disable_11ac:Disable VHT capabilities (default: false) (bool)
parm: remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool)
parm: disable_11ax:Disable HE capabilities (default: false) (bool)
parm: disable_11be:Disable EHT capabilities (default: false) (bool)
Modules parm for mac80211 :
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
####### systemctl list network units #########
cloud-init-local.service loaded inactive dead Cloud-init: Local Stage (pre-network)
cloud-init.service loaded inactive dead Cloud-init: Network Stage
networkd-dispatcher.service loaded inactive dead Dispatcher daemon for systemd-networkd
● networking.service not-found inactive dead networking.service
NetworkManager-wait-online.service loaded active exited Network Manager Wait Online
NetworkManager.service loaded active running Network Manager
systemd-networkd-wait-online.service loaded inactive dead Wait for Network to be Configured
systemd-networkd.service loaded inactive dead Network Configuration
systemd-resolved.service loaded active running Network Name Resolution
systemd-timesyncd.service loaded active running Network Time Synchronization
wpa_supplicant.service loaded active running WPA supplicant
######## nmcli connection show ###########
NAME UUID TYPE DEVICE
lo 395c9300-247b-4c5e-bed1-e85b65e06cb4 loopback lo
Bbox-4919F1B5 14c385d6-c4ad-4065-8cbf-c2d827d32175 wifi --
Nothing Phone (2) Renaud 3e4d9bba-747e-4b7e-a60c-09efb0d26f81 wifi --
######### nmcli -f all d show wlo1 #############
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/2
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: --
GENERAL.DRIVER: iwlwifi
GENERAL.DRIVER-VERSION: 6.8.0-48-generic
GENERAL.FIRMWARE-VERSION: 86.fb5c9aeb.0 gl-c0-fm-c0-86.uc
GENERAL.HWADDR: 28:A0:6B:BD:21:C6
GENERAL.MTU: 1500
GENERAL.STATE: 20 (indisponible)
GENERAL.REASON: 2 (Le périphérique est maintenant géré)
GENERAL.IP4-CONNECTIVITY: 1 (aucun)
GENERAL.IP6-CONNECTIVITY: 1 (aucun)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:06.0/0000:01:00.0/net/wlo1
GENERAL.PATH: pci-0000:01:00.0
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: non
GENERAL.NM-MANAGED: oui
GENERAL.AUTOCONNECT: oui
GENERAL.FIRMWARE-MISSING: non
GENERAL.NM-PLUGIN-MISSING: non
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: inconnu
CAPABILITIES.CARRIER-DETECT: non
CAPABILITIES.SPEED: inconnu
CAPABILITIES.IS-SOFTWARE: non
CAPABILITIES.SRIOV: non
INTERFACE-FLAGS.UP: non
INTERFACE-FLAGS.LOWER-UP: non
INTERFACE-FLAGS.CARRIER: non
INTERFACE-FLAGS.PROMISC: non
WIFI-PROPERTIES.WEP: oui
WIFI-PROPERTIES.WPA: oui
WIFI-PROPERTIES.WPA2: oui
WIFI-PROPERTIES.TKIP: oui
WIFI-PROPERTIES.CCMP: oui
WIFI-PROPERTIES.AP: oui
WIFI-PROPERTIES.ADHOC: oui
WIFI-PROPERTIES.2GHZ: oui
WIFI-PROPERTIES.5GHZ: oui
WIFI-PROPERTIES.6GHZ: non
WIFI-PROPERTIES.MESH: non
WIFI-PROPERTIES.IBSS-RSN: oui
IP4.GATEWAY: --
IP6.GATEWAY: --
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
######### iw dev wlo1 link #############
Not connected.
J'espère que vous pourrez me donner un coup de main ! Merci par avance
Dernière modification par papyreno (Le 15/11/2024, à 16:41)
Hors ligne
#2 Le 15/11/2024, à 15:54
- xubu1957
Re : [Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
Bonjour,
Voir le § 1 > [Tuto] Pas de Wi-fi ? Éléments importants à vérifier, pour mettre un chiffrement en WPA2 seul.
et [Solved] WiFi lost after suspend (MSI Prestige 16 AI EVO B1MG)
Dernière modification par xubu1957 (Le 15/11/2024, à 16:00)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 15/11/2024, à 16:43
- papyreno
Re : [Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
Waouh merci beaucoup pour ta réponse aussi rapide xubu1957 J'ai modifié ma box et j'ai créé le script indiqué dans le post que tu mentionnes et c'est bon (au moins pour le wifi ^^)
Hors ligne
#4 Le 15/11/2024, à 16:45
- xubu1957
Re : [Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
D'autres anomalies ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 15/11/2024, à 16:47
- papyreno
Re : [Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
Oui, le son est super faible, limite inaudible. Je créerais un nouveau post plus tard, ça me gêne moins que le problème de wifi.
Hors ligne
#6 Le 15/11/2024, à 16:56
- xubu1957
Re : [Résolu] Ubuntu 24.04.1 - Wifi KO après mise en veille
Vu la Doc pipewire, il faudra montrer :
wpctl status
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
Pages : 1