Pages : 1
#1 Le 24/01/2009, à 18:26
- madrippeur
Pinnacle Pctv telescope 73A
Bonjour à vous les amis !
Je me suis depuis peux monté un htpc grace à la distribution mythbuntu.
Tout y fonctionne à merveille (j'utilise un pinnacle nano stick pour la tnt ).
Aujourd'hui je suis retourné en magasin pour me racheter une clé usb tnt en espérant faire un double tuner (regarder une emmission et en enregistrer une autre). Je voulais racheter le même onglet usb qui fonctionne à merveille, et la c'est le drame ^^ ...
N'ayant plus en magasin l'onglet que je voulais, je me suis jeté sur un :
Pinnacle Pctv telescope 73A
Seulement celui-ci, je n'arrive pas à le faire fonctionner. Après plusieurs recherches sur le net, je m'adresse à vous car je n'ai rien trouvé 
Pourriez vous m'aider un peu pour installer ce matériel ?
Que dois je vous fournir comme informations supplémentaires ?
lsusb :
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 2304:0243 Pinnacle Systems, Inc. [hex]
Bus 001 Device 006: ID 2304:0237 Pinnacle Systems, Inc. [hex]
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hublsmod :
Module Size Used by
dvb_usb_dib0700 37128 0
dib7000p 25224 2 dvb_usb_dib0700
dib7000m 24068 1 dvb_usb_dib0700
dvb_usb 24460 1 dvb_usb_dib0700
dvb_core 86272 1 dvb_usb
dib3000mc 20616 1 dvb_usb_dib0700
dibx000_common 11652 3 dib7000p,dib7000m,dib3000mc
dib0070 15876 2 dvb_usb_dib0700
af_packet 25728 2
lirc_cmdir 16492 0
commandir 37584 1 lirc_cmdir
lirc_dev 20020 1 lirc_cmdir
sco 18308 2
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
rfcomm 44432 0
l2cap 30464 6 bnep,rfcomm
bluetooth 61924 6 sco,bnep,rfcomm,l2cap
ppdev 15620 0
ipv6 263972 33
sbs 19464 0
container 11520 0
pci_slot 12552 0
wmi 14504 0
video 25104 0
output 11008 1 video
sbshc 13440 1 sbs
battery 18436 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
em28xx 69032 0
videodev 41344 1 em28xx
v4l1_compat 22404 1 videodev
compat_ioctl32 9344 1 em28xx
videobuf_vmalloc 14852 1 em28xx
videobuf_core 26628 2 em28xx,videobuf_vmalloc
ir_common 48132 1 em28xx
tveeprom 20228 1 em28xx
i2c_core 31892 9 dvb_usb_dib0700,dib7000p,dib7000m,dvb_usb,dib3000mc,dibx000_common,dib0070,em28xx,tveeprom
ndiswrapper 196380 0
sbp2 29324 0
ieee1394 96324 1 sbp2
lp 17156 0
parport 42604 2 ppdev,lp
lmpcm_usb 12800 0
evdev 17696 10
snd_hda_intel 381488 1
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 1 snd_seq_midi
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 45200 0
serio_raw 13444 0
button 14224 0
shpchp 37908 0
pcspkr 10624 0
intel_agp 33724 0
snd 63268 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15328 1 snd
agpgart 42184 1 intel_agp
snd_page_alloc 16136 2 snd_hda_intel,snd_pcm
pci_hotplug 35236 1 shpchp
ext3 133384 2
jbd 55444 1 ext3
mbcache 16004 1 ext3
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 4
crc_t10dif 9984 1 sd_mod
ata_generic 12932 0
sg 39732 0
usb_storage 81728 0
usbhid 35840 0
hid 50560 1 usbhid
ata_piix 24580 3
libusual 27156 1 usb_storage
pata_acpi 12160 0
libata 177312 3 ata_generic,ata_piix,pata_acpi
uhci_hcd 30736 0
ehci_hcd 43276 0
scsi_mod 155212 6 sbp2,sr_mod,sd_mod,sg,usb_storage,libata
dock 16656 1 libata
usbcore 148848 12 dvb_usb_dib0700,dvb_usb,commandir,em28xx,ndiswrapper,lmpcm_usb,usb_storage,usbhid,libusual,uhci_hcd,ehci_hcd
thermal 23708 0
processor 42156 1 thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 1dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fedf800 (usable)
[ 0.000000] BIOS-e820: 000000001fedf800 - 000000001fee0000 (reserved)
[ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x1fedf max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1fedf000 @ 7000-d000
[ 0.000000] RAMDISK: 1f6fd000 - 1fecea75
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F82B0, 0024 (r2 HPQOEM)
[ 0.000000] ACPI: XSDT 1FEE30C0, 005C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FEE7A40, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FEE3280, 476D (r1 HPQOEM SLIC-CPC 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 1FEE0000, 0040
[ 0.000000] ACPI: SLIC 1FEE7C80, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: HPET 1FEE7E40, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 1FEE7EC0, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 1FEE7B80, 0084 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 1FEE7F40, 015C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 1FEE83D0, 0275 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fedf000
[ 0.000000] low ram: 00000000 - 1fedf000
[ 0.000000] bootmap 00002000 - 00005fdc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fedf000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [001f6fd000 - 001fecea75] RAMDISK ==> [001f6fd000 - 001fecea75]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00f5ee0] 000f5ee0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fedf
[ 0.000000] HighMem 0x0001fedf -> 0x0001fedf
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fedf
[ 0.000000] On node 0 totalpages: 130686
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 125573 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
[ 0.000000] Kernel command line: root=UUID=c24169bf-fc85-4b30-9aa3-1172bcfeb15a ro locale=fr_FR quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2800.726 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 504388k/523132k available (2572k kernel code, 18116k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfedf000 ( 510 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.45 BogoMIPS (lpj=11202904)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018644] ACPI: Core revision 20080609
[ 0.021140] ACPI: Checking initramfs for custom DSDT
[ 0.372237] ENABLING IO-APIC IRQs
[ 0.372419] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.412729] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[ 0.416026] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5601.68 BogoMIPS (lpj=11203376)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.500557] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[ 0.500577] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.504031] Measured 560 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.504031] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.504043] Brought up 2 CPUs
[ 0.504047] Total of 2 processors activated (11203.14 BogoMIPS).
[ 0.504072] CPU0 attaching sched-domain:
[ 0.504076] domain 0: span 0-1 level CPU
[ 0.504083] groups: 0 1
[ 0.504091] CPU1 attaching sched-domain:
[ 0.504094] domain 0: span 0-1 level CPU
[ 0.504098] groups: 1 0
[ 0.504186] net_namespace: 840 bytes
[ 0.504186] Booting paravirtualized kernel on bare hardware
[ 0.504414] Time: 16:10:27 Date: 01/24/09
[ 0.504452] NET: Registered protocol family 16
[ 0.504484] EISA bus registered
[ 0.504484] ACPI: bus type pci registered
[ 0.504484] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.530451] PCI: PCI BIOS revision 3.00 entry at 0xf1e60, last bus=2
[ 0.530455] PCI: Using configuration type 1 for base access
[ 0.533186] ACPI: EC: Look up EC in DSDT
[ 0.543759] ACPI: Interpreter enabled
[ 0.543766] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.543795] ACPI: Using IOAPIC for interrupt routing
[ 0.552056] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.552145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.552151] pci 0000:00:01.0: PME# disabled
[ 0.552222] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdff8000, fdffbfff]
[ 0.552268] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.552274] pci 0000:00:1b.0: PME# disabled
[ 0.552317] PCI: 0000:00:1d.0 reg 20 io port: [ff00, ff1f]
[ 0.552377] PCI: 0000:00:1d.1 reg 20 io port: [fe00, fe1f]
[ 0.552434] PCI: 0000:00:1d.2 reg 20 io port: [fd00, fd1f]
[ 0.552491] PCI: 0000:00:1d.3 reg 20 io port: [fc00, fc1f]
[ 0.552545] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdfff000, fdfff3ff]
[ 0.552598] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.552603] pci 0000:00:1d.7: PME# disabled
[ 0.552757] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.552766] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.552774] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.552782] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.552790] PCI: 0000:00:1f.1 reg 20 io port: [fb00, fb0f]
[ 0.552838] PCI: 0000:00:1f.2 reg 10 io port: [fa00, fa07]
[ 0.552846] PCI: 0000:00:1f.2 reg 14 io port: [f900, f903]
[ 0.552853] PCI: 0000:00:1f.2 reg 18 io port: [f800, f807]
[ 0.552860] PCI: 0000:00:1f.2 reg 1c io port: [f700, f703]
[ 0.552868] PCI: 0000:00:1f.2 reg 20 io port: [f600, f60f]
[ 0.552876] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fdffe000, fdffe3ff]
[ 0.552898] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.552903] pci 0000:00:1f.2: PME# disabled
[ 0.552951] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[ 0.553012] PCI: 0000:01:00.0 reg 10 32bit mmio: [fa000000, faffffff]
[ 0.553020] PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff]
[ 0.553036] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fb000000, fbffffff]
[ 0.553048] PCI: 0000:01:00.0 reg 30 32bit mmio: [fcfe0000, fcffffff]
[ 0.553108] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fcffffff]
[ 0.553115] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff]
[ 0.553168] PCI: 0000:02:04.0 reg 10 32bit mmio: [fdef0000, fdefffff]
[ 0.553178] PCI: 0000:02:04.0 reg 14 32bit mmio: [fdee0000, fdeeffff]
[ 0.553270] pci 0000:00:1e.0: transparent bridge
[ 0.553278] PCI: bridge 0000:00:1e.0 32bit mmio: [fde00000, fdefffff]
[ 0.553296] bus 00 -> node 0
[ 0.553307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.553741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.572691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.572691] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.572691] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.572858] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.573068] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.573281] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.573493] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.573705] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.573808] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.573808] pnp: PnP ACPI init
[ 0.573808] ACPI: bus type pnp registered
[ 0.576794] pnp: PnP ACPI: found 11 devices
[ 0.576794] ACPI: ACPI bus type pnp unregistered
[ 0.576794] PnPBIOS: Disabled by ACPI PNP
[ 0.576794] PCI: Using ACPI for IRQ routing
[ 0.584048] NET: Registered protocol family 8
[ 0.584052] NET: Registered protocol family 20
[ 0.584080] NetLabel: Initializing
[ 0.584080] NetLabel: domain hash size = 128
[ 0.584080] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.584098] NetLabel: unlabeled traffic allowed by default
[ 0.584106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.584114] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.586549] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.586552] actual entries 65620
[ 0.586679] AppArmor: AppArmor Filesystem Enabled
[ 0.586704] ACPI: RTC can wake from S4
[ 0.588051] Switched to high resolution mode on CPU 0
[ 0.588149] Switched to high resolution mode on CPU 1
[ 0.592046] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.592051] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.592056] system 00:01: ioport range 0x294-0x297 has been reserved
[ 0.592060] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.592076] system 00:07: ioport range 0x400-0x4bf has been reserved
[ 0.592093] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.592104] system 00:0a: iomem range 0xcf000-0xcffff has been reserved
[ 0.592108] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.592112] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.592115] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.592119] system 00:0a: iomem range 0xfed00000-0xfed000ff could not be reserved
[ 0.592123] system 00:0a: iomem range 0x1fee0000-0x1fefffff could not be reserved
[ 0.592127] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.592131] system 00:0a: iomem range 0x100000-0x1fedffff could not be reserved
[ 0.592135] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.592138] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.592142] system 00:0a: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.592146] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.592150] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.627932] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.627936] pci 0000:00:01.0: IO window: disabled
[ 0.627942] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff
[ 0.627947] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.627955] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.627957] pci 0000:00:1e.0: IO window: disabled
[ 0.627964] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
[ 0.627969] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.627986] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627991] pci 0000:00:01.0: setting latency timer to 64
[ 0.628016] pci 0000:00:1e.0: setting latency timer to 64
[ 0.628022] bus: 00 index 0 io port: [0, ffff]
[ 0.628025] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.628027] bus: 01 index 0 mmio: [0, 0]
[ 0.628030] bus: 01 index 1 mmio: [fa000000, fcffffff]
[ 0.628033] bus: 01 index 2 mmio: [e0000000, efffffff]
[ 0.628036] bus: 01 index 3 mmio: [0, 0]
[ 0.628038] bus: 02 index 0 mmio: [0, 0]
[ 0.628041] bus: 02 index 1 mmio: [fde00000, fdefffff]
[ 0.628044] bus: 02 index 2 mmio: [0, 0]
[ 0.628046] bus: 02 index 3 io port: [0, ffff]
[ 0.628049] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.628061] NET: Registered protocol family 2
[ 0.640107] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.640425] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.640479] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.640524] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.640528] TCP reno registered
[ 0.648122] NET: Registered protocol family 1
[ 0.648281] checking if image is initramfs... it is
[ 5.862917] Freeing initrd memory: 8006k freed
[ 5.864632] audit: initializing netlink socket (disabled)
[ 5.864663] type=2000 audit(1232813431.864:1): initialized
[ 5.870376] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 5.874512] VFS: Disk quotas dquot_6.5.1
[ 5.874686] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.874859] msgmni has been set to 1001
[ 5.875071] io scheduler noop registered
[ 5.875076] io scheduler anticipatory registered
[ 5.875079] io scheduler deadline registered
[ 5.875100] io scheduler cfq registered (default)
[ 5.875237] pci 0000:01:00.0: Boot video device
[ 5.875398] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 5.875444] pcieport-driver 0000:00:01.0: found MSI capability
[ 5.875484] pci_express 0000:00:01.0:pcie00: allocate port service
[ 5.876105] isapnp: Scanning for PnP cards...
[ 6.227829] isapnp: No Plug & Play device found
[ 6.288468] hpet_resources: 0xfed00000 is busy
[ 6.288609] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 6.292656] brd: module loaded
[ 6.292761] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 6.293056] PNP: No PS/2 controller found. Probing ports directly.
[ 6.295290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.295300] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.295785] mice: PS/2 mouse device common for all mice
[ 6.295984] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 6.296012] rtc0: alarms up to one month, hpet irqs
[ 6.296258] EISA: Probing bus 0 at eisa.0
[ 6.296295] EISA: Detected 0 cards.
[ 6.296299] cpuidle: using governor ladder
[ 6.296302] cpuidle: using governor menu
[ 6.297126] TCP cubic registered
[ 6.297163] Using IPI No-Shortcut mode
[ 6.297495] registered taskstats version 1
[ 6.297642] Magic number: 9:86:187
[ 6.297748] rtc_cmos 00:04: setting system clock to 2009-01-24 16:10:33 UTC (1232813433)
[ 6.297754] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.297756] EDD information not available.
[ 6.298053] Freeing unused kernel memory: 424k freed
[ 6.298126] Write protecting the kernel text: 2576k
[ 6.298177] Write protecting the kernel read-only data: 936k
[ 6.502184] fuse init (API version 7.9)
[ 6.527115] fan PNP0C0B:00: registered as cooling_device0
[ 6.527126] ACPI: Fan [FAN] (on)
[ 6.544909] processor ACPI0007:00: registered as cooling_device1
[ 6.545205] ACPI: SSDT 1FEE8340, 0087 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 6.545640] processor ACPI0007:01: registered as cooling_device2
[ 6.553528] thermal LNXTHERM:01: registered as thermal_zone0
[ 6.553897] ACPI: Thermal Zone [THRM] (-270 C)
[ 7.108916] usbcore: registered new interface driver usbfs
[ 7.108951] usbcore: registered new interface driver hub
[ 7.113510] usbcore: registered new device driver usb
[ 7.123747] No dock devices found.
[ 7.143833] SCSI subsystem initialized
[ 7.153602] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.153619] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.153624] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.153683] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 7.157599] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 7.157616] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 7.166629] USB Universal Host Controller Interface driver v3.0
[ 7.175231] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.175450] usb usb1: configuration #1 chosen from 1 choice
[ 7.175493] hub 1-0:1.0: USB hub found
[ 7.175505] hub 1-0:1.0: 8 ports detected
[ 7.192244] libata version 3.00 loaded.
[ 7.528666] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.528680] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.528685] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.528723] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.528753] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 7.528880] usb usb2: configuration #1 chosen from 1 choice
[ 7.528921] hub 2-0:1.0: USB hub found
[ 7.528932] hub 2-0:1.0: 2 ports detected
[ 7.736368] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.736382] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.736387] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.736427] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 7.736466] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 7.736598] usb usb3: configuration #1 chosen from 1 choice
[ 7.736643] hub 3-0:1.0: USB hub found
[ 7.736655] hub 3-0:1.0: 2 ports detected
[ 7.752527] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 7.841800] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.841812] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.841817] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.841859] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 7.841895] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 7.842038] usb usb4: configuration #1 chosen from 1 choice
[ 7.842079] hub 4-0:1.0: USB hub found
[ 7.842089] hub 4-0:1.0: 2 ports detected
[ 7.885058] usb 1-5: configuration #1 chosen from 1 choice
[ 7.996025] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 8.048555] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 8.048565] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8.048570] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.048614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 8.048649] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 8.048776] usb usb5: configuration #1 chosen from 1 choice
[ 8.048818] hub 5-0:1.0: USB hub found
[ 8.048832] hub 5-0:1.0: 2 ports detected
[ 8.130560] usb 1-7: configuration #1 chosen from 1 choice
[ 8.244031] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 8.256694] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.256739] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 8.256763] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 8.256820] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.256848] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 8.256863] pata_acpi 0000:00:1f.2: PCI INT B disabled
[ 8.262911] ata_piix 0000:00:1f.1: version 2.12
[ 8.262925] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.262970] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 8.263517] scsi0 : ata_piix
[ 8.265163] scsi1 : ata_piix
[ 8.265972] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 8.265977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 8.422018] usb 2-1: configuration #1 chosen from 1 choice
[ 8.536024] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 8.604588] ata1.00: ATA-6: ST3160021A, 8.01, max UDMA/100
[ 8.604594] ata1.00: 312581808 sectors, multi 16: LBA48
[ 8.604624] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A108, max UDMA/33
[ 8.604645] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 8.620517] ata1.00: configured for UDMA/33
[ 8.636310] ata1.01: configured for UDMA/33
[ 8.636385] ata2: port disabled. ignoring.
[ 8.636556] scsi 0:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
[ 8.640726] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A108 PQ: 0 ANSI: 5
[ 8.640881] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.640888] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 8.640940] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 8.641025] scsi2 : ata_piix
[ 8.641141] scsi3 : ata_piix
[ 8.642168] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
[ 8.642173] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
[ 8.711013] usb 2-2: configuration #1 chosen from 1 choice
[ 8.714273] usbcore: registered new interface driver hiddev
[ 8.714331] usbcore: registered new interface driver libusual
[ 8.728207] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 8.731527] Initializing USB Mass Storage driver...
[ 8.731855] scsi4 : SCSI emulation for USB Mass Storage devices
[ 8.732200] usb-storage: device found at 5
[ 8.732204] usb-storage: waiting for device to settle before scanning
[ 8.740130] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1
[ 8.740586] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.740644] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 8.770557] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 8.780142] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
[ 8.807426] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 8.812126] input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2
[ 8.812208] usbcore: registered new interface driver usbhid
[ 8.812214] usbhid: v2.6:USB HID core driver
[ 8.812218] usbcore: registered new interface driver usb-storage
[ 8.812231] USB Mass Storage support registered.
[ 9.001857] Driver 'sd' needs updating - please use bus_type methods
[ 9.004221] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 9.004256] sd 0:0:0:0: [sda] Write Protect is off
[ 9.004260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.004315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.004437] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 9.004470] sd 0:0:0:0: [sda] Write Protect is off
[ 9.004474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.004621] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.004627] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 9.014315] sda1 sda2 < sda5 sda6 >
[ 9.035480] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.050997] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.051004] Uniform CD-ROM driver Revision: 3.20
[ 9.051131] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 9.401646] PM: Starting manual resume from disk
[ 9.401651] PM: Resume from partition 8:5
[ 9.401653] PM: Checking hibernation image.
[ 9.401950] PM: Resume from disk failed.
[ 9.439834] kjournald starting. Commit interval 5 seconds
[ 9.439858] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.203298] udevd version 124 started
[ 12.726320] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.864188] Linux agpgart interface v0.103
[ 13.078468] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.149631] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.202463] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 13.224047] ACPI: Power Button (FF) [PWRF]
[ 13.224150] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 13.260639] ACPI: Power Button (CM) [PWRB]
[ 13.757377] usb-storage: device scan complete
[ 13.758047] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 13.758669] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 13.759298] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 13.760068] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 13.761699] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.761915] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 13.762923] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 13.763063] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 13.764061] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 13.764197] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 13.765173] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 13.765305] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 13.836642] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.836667] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.870052] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 13.887736] usbcore: registered new interface driver lmpcm_usb
[ 13.887743] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 15.927677] lp: driver loaded but no devices found
[ 16.022845] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 16.093720] ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loaded
[ 16.093987] ndiswrapper 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.094894] ndiswrapper: using IRQ 16
[ 16.352925] wlan0: ethernet device 00:1e:2a:c0:32:52 using NDIS driver: wg311v3, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
[ 16.352947] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 16.356277] usbcore: registered new interface driver ndiswrapper
[ 16.491502] Linux video capture interface: v2.00
[ 16.513442] em28xx v4l2 driver version 0.1.0 loaded
[ 16.513493] usbcore: registered new interface driver em28xx
[ 16.839136] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
[ 17.549282] EXT3 FS on sda1, internal journal
[ 18.559097] kjournald starting. Commit interval 5 seconds
[ 18.559467] EXT3 FS on sda6, internal journal
[ 18.559476] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.333384] type=1505 audit(1232813446.593:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4081
[ 19.333611] type=1505 audit(1232813446.593:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4081
[ 19.392608] type=1505 audit(1232813446.653:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4085
[ 19.654429] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.323661] ACPI: WMI: Mapper loaded
[ 22.848085] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.379010] NET: Registered protocol family 10
[ 23.379979] lo: Disabled Privacy Extensions
[ 25.422285] ppdev: user-space parallel port driver
[ 34.064021] Bluetooth: Core ver 2.13
[ 34.064131] NET: Registered protocol family 31
[ 34.064140] Bluetooth: HCI device and connection manager initialized
[ 34.064152] Bluetooth: HCI socket layer initialized
[ 34.127688] Bluetooth: L2CAP ver 2.11
[ 34.127700] Bluetooth: L2CAP socket layer initialized
[ 34.162997] Bluetooth: RFCOMM socket layer initialized
[ 34.163023] Bluetooth: RFCOMM TTY layer initialized
[ 34.163026] Bluetooth: RFCOMM ver 1.10
[ 34.247649] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.247657] Bluetooth: BNEP filters: protocol multicast
[ 34.306422] Bridge firewalling registered
[ 34.306761] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 34.568669] Bluetooth: SCO (Voice Link) ver 0.6
[ 34.568677] Bluetooth: SCO socket layer initialized
[ 37.432394] lirc_dev: IR Remote Control driver registered, major 61
[ 37.453499] usbcore: registered new interface driver commandir
[ 37.457584] lirc_dev: lirc_register_plugin: sample_rate: 20
[ 37.457840] lirc_cmdir: freq set to 38000Hz
[ 40.513143] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.071002] NET: Registered protocol family 17
[ 53.215124] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 55.508024] lirc_cmdir: device is unplugged
[ 63.564019] wlan0: no IPv6 routers present
[ 1652.108025] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 1652.241410] usb 1-3: configuration #1 chosen from 1 choice
[ 1652.766759] dib0700: loaded with support for 7 different device-types
[ 1652.768727] dvb-usb: found a 'Pinnacle PCTV 73e' in cold state, will try to load a firmware
[ 1652.768738] firmware: requesting dvb-usb-dib0700-1.10.fw
[ 1652.865040] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 1653.071230] dib0700: firmware started successfully.
[ 1653.572047] dvb-usb: found a 'Pinnacle PCTV 73e' in warm state.
[ 1653.572381] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1653.572816] DVB: registering new adapter (Pinnacle PCTV 73e)
[ 1653.813250] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 1654.000880] DiB0070: successfully identified
[ 1654.002471] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input7
[ 1654.044167] dvb-usb: schedule remote query interval to 150 msecs.
[ 1654.044176] dvb-usb: Pinnacle PCTV 73e successfully initialized and connected.
[ 1654.047719] usbcore: registered new interface driver dvb_usb_dib0700
[ 1654.363538] usb 1-5: USB disconnect, address 4
[ 1657.476025] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 1657.609411] usb 1-6: configuration #1 chosen from 1 choiceDernière modification par madrippeur (Le 24/01/2009, à 18:44)
Hors ligne
#2 Le 24/01/2009, à 22:56
- madrippeur
Re : Pinnacle Pctv telescope 73A
Mouarf, j'ai beau rechercher, j'en suis toujours au même point ... à priori, aucune info sur le net
Hors ligne
#3 Le 25/01/2009, à 15:45
- madrippeur
Re : Pinnacle Pctv telescope 73A
J'en suis toujours au même point avec ce dvb-t ...
Lorsque je branche le périphérique sur l'usb, dmesg me laisse ça comme message :
[50067.944035] usb 5-5: new high speed USB device using ehci_hcd and address 8
[50068.077063] usb 5-5: configuration #1 chosen from 1 choice
[50362.494487] usb 5-5: USB disconnect, address 8
[50366.624052] usb 5-6: new high speed USB device using ehci_hcd and address 9
[50366.767958] usb 5-6: configuration #1 chosen from 1 choiceJ'aurai vraiment besoin d'aide sur ce coup la s'il vous plait.
Hors ligne
#4 Le 10/02/2009, à 18:48
- Coolio
Re : Pinnacle Pctv telescope 73A
Salut, je possède aussi ce module TNT.
J'ai également fait des recherches mais je n'ai rien trouvé.
Il va falloir mettre les mains dans le cambouis mais comment faire.
Ubuntu 20.04.1 Pc portable Asus G17
DD externe Icy Box IB-390STUS-B de 1 To
Hors ligne
#5 Le 07/07/2009, à 16:25
- F.
Re : Pinnacle Pctv telescope 73A
Idem,
je possède le PCTV teleScope (73a) de Pinnacle et je n'arrive pas à le faire fonctionner sous kubuntu (j'ai essayé avec Kaffeine et Dragon Player).
Quelqu'un aurait-il des tuyaux à me filer ?
Pensez-vous que ça aurait une chance de fonctionner si je suis ce tuto : http://doc.ubuntu-fr.org/pinnacle_pctv_nano ?
Merci d'avance 
#6 Le 14/10/2009, à 17:00
- YP
Re : Pinnacle Pctv telescope 73A
Bonjour,
Je suis un nouveau venu dans le monde de Linux Ubuntu. Je possède aussi le Pinnacle PCTV TeleScope (73a). Problème identique à celui que vous relevez.
J'ai une configuration qui tourne sous Ubuntu 9.04 64 bits (en fait Xubuntu) dans laquelle installé VLC (1.0.2 Goldeneye).
J'ai Installé Mercurial, puis V4L-DVB (à partir du wiki du site linuxtv, cliquer sur "How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers").
Après redémarrage, j'ai installé w-scan (via apt) que j'ai lancé pour construire un fichier channels.conf compatible avec VLC.
En suivant les informations de la documentation du site Ubuntu sur l'utilisation de VLC avec la TNT d'une part, sur la TNT en suite et sur l'utilisation de Kaffeine avec la TNT d'autre part, j'ai obtenu un 73a qui fonctionne très bien en réception pour ce que j'ai pu en voir pour l'instant (c'est tout frais), et ce tant avec VLC qu'avec Kaffeine. Notons toutefois la forte sensibilité à la direction (un léger déplacement et le signal est interrompu).
Hors ligne
#7 Le 07/06/2010, à 19:41
- Coolio
Re : Pinnacle Pctv telescope 73A
J'ai trouvé ce lien qui décrit une procédure d'installation, mais je ne comprends pas tout :
http://www.linux-magazine.it/La-TV-a-passeggio-pag_2.htm
Ubuntu 20.04.1 Pc portable Asus G17
DD externe Icy Box IB-390STUS-B de 1 To
Hors ligne
#8 Le 12/05/2014, à 18:57
- laima
Re : Pinnacle Pctv telescope 73A
Bonjour,
j'ai suivis le magazine et voici ce qui faut faire :
sudo apt-get install linux-headers-`uname -r` build-essential xinetd
puis
sudo hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make
sudo make install
Hors ligne