Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 30/03/2005, à 08:45

Jf

Dual head

Hello,

J'ai une carte ATI READEON 7200 disposant de deux sorties DVI
J'ai mon bureau qui s'affiche de deux façons identiques sur chaque écrans (CRT)
J'aimerai que ce soit un bureaux étendu sur les deux écrans.

Voici ma fichier de config, j'ai beau cherché je trouve pas sad

Merci

Section "Files"
    FontPath    "unix/:7000"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/Speedo"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "GLcore"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "speedo"
    Load    "type1"
    Load    "v4l"
    Load    "vbe"
    Load    "xtt"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xfree86"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "be"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
    Driver        "ati"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier     "monitor1"
    VendorName     "Plug'n Play"
    ModelName     "Philips 109S"
    HorizSync     30-95
    VertRefresh    50-160
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier     "monitor2"
    VendorName    "Hewlett-Packard"
    ModelName     "HP D8901A HP 71 17-inch Monitor"
    HorizSync     31.0-70.0
    VertRefresh     50.0-120.0
EndSection


Section "Screen"
    Identifier    "Screen1"
    Device        "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier    "Screen2"
    Device        "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
    Monitor        "monitor2"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen         "Screen1"
    Screen         "Screen2" RightOf "Sreen1"   
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection

#2 Le 30/03/2005, à 09:39

coffee

Re : Dual head

le driver fglrx le permet en théorie (vu avec fglrxconfig) après... je ne sais pas


Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)

Hors ligne

#3 Le 30/03/2005, à 09:44

Jf

Re : Dual head

Merci, mais hélas ce driver n'est pas compatible avec ma carte :-(

#4 Le 30/03/2005, à 09:58

coffee

Re : Dual head

Je renommerai déjà une des lignes

Device        "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"

puis aussi:

    Screen         "Screen2" RightOf "Screen1"

Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)

Hors ligne

#5 Le 13/04/2005, à 21:26

yedermat

Re : Dual head

bonjour,

j'ai une radeon 9600SE et j'aimerai configurer xorg.conf pour avoir deux ecrans dual screen "different de clone"

l'application  xorgconfig ne permet apparement pas de configurer deux ecrans

et fireglcontrol ne prend pas en compte les modifs

merci

#6 Le 14/04/2005, à 09:19

PengouinPdt

Re : Dual head

Dans ta section Device, rajoute :

Option "TwinView" "on"
Option "TwinViewOrientation "CRT-0 LeftOf CRT-1"  
Option "SecondMonitorVertRefresh" "mettre les valeurs correspondantes"
Option "SecondMonitorHorizSync" "mettre les valeurs correspondantes"
Option "Metamodes" "1024x768,1024x768;800x600,800x600"

A contrario, je ne sais pas si le pilote générique ati sous Xorg le gère...
le pilote proprio oui !


Ego ~
YUP.py :: Yet Uploader Pixxie.py :: script python : post d'images sur forum !

Hors ligne

#7 Le 14/04/2005, à 10:14

Bkssou

Re : Dual head

heu twinview c'est pas seuleument pour les carte Nvidia?

Hors ligne

#8 Le 14/04/2005, à 12:20

PengouinPdt

Re : Dual head

C possible ...
mais tu dois avoir l'équivalent chez ATI.

je ne peux te le confirmer, mais il serait étonnant que l'équivalent n'existe pas.


Ego ~
YUP.py :: Yet Uploader Pixxie.py :: script python : post d'images sur forum !

Hors ligne

#9 Le 14/04/2005, à 12:35

Bkssou

Re : Dual head

oui mais c'est plus chiant: un autre post: http://forum.ubuntu-fr.org/viewtopic.php?id=3105

(le pb dans ce poste est que je ne suis pas sur des options)

Hors ligne

#10 Le 14/04/2005, à 14:04

yedermat

Re : Dual head

neutral

bon j'ai réussi a avoir mes deux ecrans en dual (mes deux ecrans affiche un ecran) en modifiant le xorg (grace au XFREE86)

maintenant ce mode n'est pas très interressant je vais essayer de le modifier pour le configurer et avoir deux bureaux dissocier.
si quelqu'un a déja réussit ?

voici mon fichier xorg

ps / je devrais avoir un ecran sur la télé, mais rien du tout ?

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
        EndSubSection
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr-latin9"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon 9600 SE (RV350 AQ)"
    Driver        "fglrx"
# === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
# === misc DRI settings ===
# === Screen Management ===
    Option "DesktopSetup"               "0x00000200"
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "31.5 - 60.0"
        Option "VRefresh2"                  "50 - 70"
        Option "ScreenOverlap"              "0"
# === TV-out Management ===
        Option "NoTV"                       "no"     
        Option "TVStandard"                 "PAL-B"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
        Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "yes"
        Option "ForceGenericCPU"            "no"
    Option "mtrr"                       "off"
    BusID        "PCI:1:0:0"
    VideoRam    128000
EndSection

Section "Monitor"
    Identifier    "monitor1"
    ModelName         "Philips 107S"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Monitor"
    Identifier    "monitor2"
        ModelName         "Samtron"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Screen"
    Identifier    "screen1"
    Device        "ATI Technologies, Inc. Radeon 9600 SE (RV350 AQ)"
    Monitor        "monitor1"
    DefaultDepth    24
   
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

#Section "Screen"
#    Identifier    "screen2"
#    Device        "ATI Technologies, Inc. Radeon 9600 SE (RV350 AQ)"
#    Monitor        "monitor2"
#    DefaultDepth    24
#   
#    SubSection "Display"
#        Depth        24
#        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
#    EndSubSection
#EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "screen1"
#      Screen             "screen2" RightOf "screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection

#11 Le 14/04/2005, à 17:10

yedermat

Re : Dual head

smile cool mes deux ecrans fonctionnent en dual

voici mon fichier xorgconf si ça peut aider

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
        EndSubSection
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr-latin9"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "Device"
    Identifier    "ATI Graphics Adapter connector 0"
    Driver        "fglrx"
# === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
# === misc DRI settings ===
# === Screen Management ===
        Option "DesktopSetup"               "0x00000000"
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "31.5 - 60.0"
        Option "VRefresh2"                  "50 - 70" 
        Option "ScreenOverlap"              "0"
# === TV-out Management ===
        Option "NoTV"                       "no"     
        Option "TVStandard"                 "PAL-B"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
        Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "yes"
        Option "ForceGenericCPU"            "no"
    Option "mtrr"                       "off"
    BusID        "PCI:1:0:0"
    VideoRam    128000
    Screen 0
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter connector 1"
    Driver                              "fglrx"
    BusID "PCI:1:0:0"    # vendor=1002, device=4151
    Screen 1
EndSection

Section "Monitor"
    Identifier    "monitor1"
    ModelName         "Philips 107S"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Monitor"
    Identifier    "monitor2"
        ModelName         "Samtron"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Screen"
    Identifier    "screen1"
    Device        "ATI Graphics Adapter connector 0"
    Monitor        "monitor1"
    DefaultDepth    24
   
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier    "screen2"
    Device        "ATI Graphics Adapter connector 1"
    Monitor        "monitor2"
    DefaultDepth    24
   
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "screen1"
    Screen             "screen2" RightOf "screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection

#12 Le 19/04/2005, à 18:23

Pierre6020

Re : Dual head

Yeeeheee ca marche merci à tous! cool

Par contre, il reste un souci, les deux écrans sont "trop" dissociés.
Je ne peux faire passer que le curseur de l'un à l'autre, pas de fenêtres, et si par exemple je lance Firefox dans l'un et que je le lance dans l'autre, il me met le gestionnaire d'utilisateurs, comme si un autre utilisateur avait déjà lancé Firefox, donc, sur l'autre écran...

Ca donne quoi chez vous?

Dernière modification par Pierre6020 (Le 19/04/2005, à 18:27)

Hors ligne

#13 Le 20/04/2005, à 14:31

yedermat

Re : Dual head

oui, en fait les ecrans fonctionnent ici avec deux drivers differents, ce qu'il faudrait c'est passer au mode extend. qui pemetrait d'utiliser un meme logiciel sur deux ecran.

pour l'instant j'ai réussit avec le mode deux écran en un (voir le premier xorg que j'ai posté) mais ce n'ai pas très interressant car une application s'ouvre sur les deux ecrans,

si quequ'un as réussit en mode extend je suis aussi interressé.

#14 Le 26/04/2005, à 15:28

mat24

Re : Dual head

Et au niveau de la sortie tv ça fonctionne ???
parce que je cherche je cherche !:!!!!!!

Hors ligne

#15 Le 26/04/2005, à 17:09

yedermat

Re : Dual head

mat24 :pour la sortie tv ça fonctionne, mais toujours pas le mode extend.

voila le fichier xorg qui marche chez moi avec un ecran et la tv

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
        EndSubSection
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr-latin9"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "Device"
    Identifier    "ATI Graphics Adapter connector 0"
    Driver        "fglrx"
# === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
# === misc DRI settings ===
# === Screen Management ===
        Option "DesktopSetup"               "0x00000000"
        Option "MonitorLayout"              "AUTO, STV"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "31.5 - 60.0"
        Option "VRefresh2"                  "50 - 70" 
        Option "ScreenOverlap"              "0"
# === TV-out Management ===
        Option "NoTV"                       "no"     
        Option "TVStandard"                 "PAL-B"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x06419064"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
        Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
    Option "mtrr"                       "off"
    BusID        "PCI:1:0:0"
    VideoRam    128000
    Screen 0
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter connector 1"
    Driver                              "fglrx"
    BusID "PCI:1:0:0"    # vendor=1002, device=4151
    Screen 1
EndSection

Section "Monitor"
    Identifier    "monitor1"
    ModelName         "Philips 107S"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Monitor"
    Identifier    "monitor2"
        ModelName         "Samtron"
    Option        "DPMS"
    HorizSync    28-49
    VertRefresh    43-72
EndSection

Section "Screen"
    Identifier    "screen1"
    Device        "ATI Graphics Adapter connector 0"
    Monitor        "monitor1"
    DefaultDepth    24
   
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier    "screen2"
    Device        "ATI Graphics Adapter connector 1"
    Monitor        "monitor2"
    DefaultDepth    24
   
    SubSection "Display"
        Depth        24
        Modes        "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "screen1"
    Screen             "screen2" RightOf "screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection

#16 Le 26/04/2005, à 17:16

yedermat

Re : Dual head

pour faire plus simple si tu veux il suffit de modifier

l'option 

Option "MonitorLayout"              "AUTO, AUTO"

par

Option "MonitorLayout"              "AUTO, STV"

et d'activer la sortie tv

# === TV-out Management ===
        Option "NoTV"                       "no"     
        Option "TVStandard"                 "PAL-B"

#17 Le 30/06/2005, à 01:05

ganach

Re : Dual head

hello
jviens de passer ma journée à essayer de configurer ma sortie tv mais je ny arrive point
g une carte ati 7000 ve et g a peu pres essayer tout ce que g trouvé sur le forum.... voici mon Xorg. conf : (si qqn pouvez m'aider.... )
Section "Files"
        FontPath        "unix/:7100"                    # local font server
        # if the local font server has problems, we can fall back on these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/CID"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
    EndSubSection
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "keyboard"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fr-latin9"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMaSection "Monitor"
        Identifier      "whalton"
        ModeleName      "télé"
        Option          "DPMS"
        HorizSync       30-65
        VertRefresh     50-75
        Modeline        "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
        Identifier      "Screen 1"
        Device          "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
        Monitor         "whalton"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSectiopping"         "4 5"
EndSection

Section "Device"
        Identifier      "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
#       Driver          "radeon"
        Driver          "fglrx"
# Option "UseInternalAGPGART" "no"
        BusID           "PCI:1:0:0"
        Screen 1
EndSection
Section "Monitor "
        Identifier      "monitor 1"
        ModelName       "hp mx70"
        Option          "DPMS"
        HorizSync       30-65   
        VertRefresh     50-75
        Modeline        "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
Section "Monitor "
        Identifier      "monitor 2"
        ModelName       "whalton"
        Option          "DPMS"
        HorizSync       30-65
        VertRefresh     50-75
        Modeline        "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
        Identifier      "Screen 1"
        Device          "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
        Monitor         "whalton"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
       Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier      "Screen 2
Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
EndSection

Section "DRI"
        Mode    0666
EndSection
         Depth           16

dejà avec la longueur qu'il fait...

#18 Le 30/06/2005, à 11:02

ganach

Re : Dual head

salut !

bon je devais etre fatigué quand g posté hier soir....
g même pas réussi à redémarrer mon interface graphique...
normal avec le bazar dans mon xorg.conf.....lol

je viens de m'y remettre...
voici mon xorg.conf qui marche (tant bien que mal) meme si je n'ai toujours pas de sortie TV qui fonctionne....

merci de votre attention :

# /etc/X12/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr-latin9"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
    Driver        "radeon"
#    Driver        "fglrx"
#    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Écran générique"
    Option        "DPMS"
    HorizSync    30-65
    VertRefresh    50-75
    Modeline    "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. Radeon 7000 VE (RV100 QY)"
    Monitor        "Écran générique"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection


Si quelqun peut m'aiguiller...

PS: jviens d'essayer la manip de yedermat...sans succes