[HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Keitaro52 · Le 02/04/2006, à 17:40

Bonjour,

Voici ma config : ATI X800 Pro, P4E@2.8 Ghz, Ubuntu 5.10, Linux kernel 2.6.12-10-386

Apres avoir fait la manip présenté par Mr. Valère, j'obtiens ;

 fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)

J'ai donc analysé le log en faisant :

grep -i agp /var/log/Xorg.0.log

J'obtiens alors

(II) fglrx(0): AGP card detected
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_EINVAL"
(EE) fglrx(0): cannot init AGP

Donc ma question est comment activé l'AGP ?

Daniel Moyne · Le 07/04/2006, à 11:40

J'ai une carte graphique X300 décrite ainsi dans mon fichier "xorg.conf"

Section "Device"
Identifier "ATI Technologies, Inc. Radeon X300 SE (RV370)"
Driver "ati"
BusID "PCI:5:0:0"
EndSection

je suis sous Ubuntu Breezy avec kernel 2.6.12-10-amd64-k8 mais j'ai aussi une Dapper Drake en test tout cela sous 64 bits et pas moyen d'activer le DRI car dans les différents articles qui mentionnent la carte X300 il semblerait que les personnes qui la font fonctionner sont où :
- sous x386,
- ou avec carte mère 64 bits mais fonctionnant en 32 bits,

d'où ma question :
quelqu'un a-t-il pu faire fonctionner cette carte en direct rendering (hardware) mais sous Ubuntu 64 bits ; chez moi "fglrx" semble introuvable comme module bien que j'aie installé les packages correpondants en fglrx.
Merci.

Daniel Moyne · Le 08/04/2006, à 18:37

Je me réponds à moi-même :

Enfin un DRI qui fonctionne avec Ububtu Breezy Badger 64 bits sous AMD 64 bits k7 avec :
- kernel 2.6.12-10-amd64-k8
- machine : x86_64
- carte "ATI Technologies, Inc. Radeon X300 SE (RV370)"

J'ai suivi un how-to que je suis infoutu de retrouver dans tout ce maquis mais comme j'ai tout passé en mode commande sous console root voici ce que j'ai fait :
# apt-get install xorg-driver-fglrx
# apt-get install linux-restricted-modules-$(uname -r)
# dpkg-reconfigure xserver-xorg (pour configurer xorg avec sélection de "fglrx" et désélection de "int10")
- récupération d'un ancien module "libdri.a" sur un site dont je ne peux malheureusement pas donner l'URL n'ayant pu retrouver ce how-to,
# cd "endroit où "libdri.a.gz" est installé"
# gunzip libdri.a.gz
# cp /usr/X11R6/lib/modules/extensions/libdri.a libdri.a.old (pour sauver l'ancien module)
# cp libdri.a /usr/X11R6/lib/modules/extensions/ (pour installer le nouveau module)

J'ai "fglrx" installé dans "/etc/modules" d'un précédent essai infructueux et j'ignore au moment où j'écris ce message s'il est nécessaire de conserver cette option.

Les résultats :
# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
.........................................
# fgl_glxgears
1065 frames in 5.0 seconds = 213.000 FPS
1104 frames in 5.0 seconds = 220.800 FPS
1096 frames in 5.0 seconds = 219.200 FPS
1116 frames in 5.0 seconds = 223.200 FPS
1110 frames in 5.0 seconds = 222.000 FPS
1126 frames in 5.0 seconds = 225.200 FPS
j'ignore si ces performances peuvent être améliorées

# glxgears
par moment quelques blocages des engrenages mais ça reprend !

Comme j'ai une Dapper Drake Flight 5 en test je vais essayer la même procédure !

Peux-on obtenir de meilleur performance que celles-ci avec par exemple les drivers ATI propriétaires.
Merci.

greptempo · Le 09/04/2006, à 10:11

Keitaro52 a écrit :

Apres avoir fait la manip présenté par Mr. Valère, j'obtiens ;
grep -i agp /var/log/Xorg.0.log
J'obtiens alors
(II) fglrx(0): AGP card detected
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_EINVAL"
(EE) fglrx(0): cannot init AGP
Donc ma question est comment activé l'AGP ?

J'ai exactement les mêmes problèmes avec une X800 Pro, je suis désespéré ...
Y a-t-il une bonne âme qui pourrait poster pas à pas la manip qu'il a faite sous Breezy 5.10 pour faire tourner sa X800 ?

A part ça Ubuntu est vraiment géniale.

Keitaro52 · Le 14/04/2006, à 09:08

A part ça Ubuntu est vraiment géniale.

Parce que ne pas pouvoir utiliser sa carte graphique et que ce soit tout le process qui prenne en charge l'interface graphique tu trouves ca géniale toi ?

Maintenant je vais pousser un peu mon coup de gueule. Mais qu'on vienne pas ensuite me dire que la communauté Linux est très réactive. J'ai observé sur la plupart de ce forum, ce sont les mêmes personnes qui posent une question et qui répondent d'eux même.

Donc tant que cette communauté ne se bougera pas un peu les fesses à essayer de résoudre les problèmes de ces utilisateurs, Linux ne pourra pas remplacer Windows / Mac. Surtout que ca fait de la mauvaise pub pour Linux car au final, pour faire marcher Linux, il faut avoir du matériel spécifique et pas en avance sur la technologie.

@ +

euska · Le 15/04/2006, à 20:33

Bonjour à tous, une envie folle de linux et me voila ici, à mon grand etonnement et contrairement à ce que j'ai vécu il y a quelques mois mon ATi X800XL semble fonctionner à merveille

fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON X800 XL Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)

fgl_glxgears
6598 frames in 5.0 seconds = 1319.600 FPS
6819 frames in 5.0 seconds = 1363.800 FPS
6814 frames in 5.0 seconds = 1362.800 FPS
6810 frames in 5.0 seconds = 1362.000 FPS
6754 frames in 5.0 seconds = 1350.800 FPS
6816 frames in 5.0 seconds = 1363.200 FPS
6773 frames in 5.0 seconds = 1354.600 FPS
6784 frames in 5.0 seconds = 1356.800 FPS
6801 frames in 5.0 seconds = 1360.200 FPS
6810 frames in 5.0 seconds = 1362.000 FPS
6757 frames in 5.0 seconds = 1351.400 FPS
6813 frames in 5.0 seconds = 1362.600 FPS
6784 frames in 5.0 seconds = 1356.800 FPS

glxgears -printfps
38815 frames in 5.0 seconds = 7762.907 FPS
38623 frames in 5.0 seconds = 7724.447 FPS
38778 frames in 5.0 seconds = 7755.490 FPS
38777 frames in 5.0 seconds = 7755.288 FPS
38782 frames in 5.0 seconds = 7756.315 FPS
38788 frames in 5.0 seconds = 7757.443 FPS
38770 frames in 5.0 seconds = 7753.961 FPS
38690 frames in 5.0 seconds = 7737.983 FPS
38783 frames in 5.0 seconds = 7756.579 FPS
38771 frames in 5.0 seconds = 7754.135 FPS
38530 frames in 5.0 seconds = 7705.808 FPS
38759 frames in 5.0 seconds = 7751.721 FPS

Pensez-vous que mes performances sont correctes ? J'ai bien l'impression que oui, desole de mes interrogations mais je n'avais plus retouché à linux depuis longtemps

Dernière modification par euska (Le 15/04/2006, à 20:35)

ursule · Le 19/04/2006, à 10:02

J'ai réinstallé kubuntu et ma carte graphique Ati Radeon Mobility 9700. Ce serait parfait à quelques exceptions près qu'il faudrait que je parvienne à éliminer:le serveur X plante souvent lorsque je change de session, ou lorsque je reboot(1 fois sur 3) jamais au démarrage.

Dans /var/log/Xlog.0.log:
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0

Si je fais $grep -i agp /var/log/Xorg.0.log
(II) fglrx(0): AGP card detected
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3580
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314 )
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
irma@kubhost:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.5642 (8.22.5)

Il se pourrait que j'ai une définition un peu trop élevée (polices trés petites)de mon écran: comment y remédier avec sudo dpkg-reconfigure xserver-xorg?
Si quelqu'un pouvait me donner un coup de main? Merci!

Gyscos · Le 24/04/2006, à 15:20

Mon accélération graphique marchait très bien jusqu'à hier, mais ce matin, j'ai mis à jour le kernel vers la version machin.15.21 (avant c'était machin.15.20) et depuis, Wolfenstein marche pas, planet penguin marche pas, et je vois que j'ai à peine 120 fps à glxgear...
Quelqu'un sait pourquoi ?...

Gyscos · Le 24/04/2006, à 16:25

Bon, c'est bien ce que je pensais, si je boot sur 15.20 ca marche (2000 à glxgear et les jeux qui marchent), quand je, boot sur 15.21 ca marche plus (115 fps à glxgears et rien qui marche bien...)...

Y'a bien une raison non ???
J'ai tout mis à jour (les restricted modules etc...)
Est-il possible que les modules et les drivers soient toujours prévus pour le kernel 15.20, et que les mises à jours de soient pas encore sorties ?...

ara qui rit · Le 25/04/2006, à 20:31

Bonjour à tous !

Ca fait deux jours que j'essaie d'installer complètement les drivers propriétaires d'ATI 8.24.8 en suivant le tuto du site. Je suis arrivé après moulte bidouilles à activer l'accélération 3dé, mais je ne peux toujours pas lancer le fireglcontrolpanel, qui me renvoie le message d'erreur suivant :

root@Sanstitre:~# fireglcontrolpanel
fireglcontrolpanel: error while loading shared libraries: libexpat.so.0 : cannot open shared object file: No such file or directory

Pourtant, il semblerait que libexpat existe :

root@Sanstitre:~# locate libexpat.so.0
/usr/lib/libexpat.so.0
/usr/lib32/libexpat.so.0
/chroot/breezy/32bits/usr/lib/libexpat.so.0

J'ai lu sur plusieurs sites que le problème était courant et qu'il fallait éditer /etc/ld.so.conf en conséquence, ce que j'ai fait :

/usr/lib
/usr/lib32
/usr/X11R6/lib32
/usr/X11R6/lib
/usr/X11R6/lib
/lib
/usr/local/lib
/chroot/breezy/32bits/usr/lib
/lib32

... et toujours rien. Le fireglcontrolpanel renvoie toujours le même message d'erreur et je ne sais plus que faire...

Suis-je le seul à être dans ce cas là ici ? Comment faire pour lancer le control panel ?

Help ?

Dernière modification par ara qui rit (Le 25/04/2006, à 20:32)

yanightmare · Le 08/05/2006, à 10:26

Ouawww Merci pour ce How-to je suis tombé dessus par hasard

yanightmare@ubuntu:~$ glxgears -printfps
5662 frames in 5.0 seconds = 1132.235 FPS
6032 frames in 5.0 seconds = 1206.229 FPS
9553 frames in 5.0 seconds = 1910.542 FPS
11187 frames in 5.0 seconds = 2237.343 FPS

___________________________________________

yanightmare@ubuntu:~$ fgl_glxgears
625 frames in 5.0 seconds = 125.000 FPS
739 frames in 5.0 seconds = 147.800 FPS
768 frames in 5.0 seconds = 153.600 FPS
742 frames in 5.0 seconds = 148.400 FPS
597 frames in 5.0 seconds = 119.400 FPS
697 frames in 5.0 seconds = 139.400 FPS

________________________________________

Carte vidéo ATI RADEON 9200 128 Mo DDR

Processeur Intel Celeron 2.4 GHz

256 mo.

Driver version : 8.16.20

Merci encore

ffomnislash · Le 09/05/2006, à 21:10

j'ai reinstalle une breezy et j'ai un pb avec les drivers ati. Je precise que je les ai deja fait fonctionner sous diverses distribution.
Apres avoir installé les drivers, compiler (make et make_instal) puis configurer avec aticonfig --initial je me retrouve toujours avec mesa.

Voici mon xorg.log.

grep EE
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) fglrx(0): Hardware already been locked.



ffomnislash@Asgard:/usr/X11R6/bin$ cat /var/log/Xorg.0.log | grep WW
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/share/X11/fonts/CID" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Specified desktop setup not supported: 8
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Failed to set up write-combining range (0xd7800000,0x7f0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd7000000,0xff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd6000000,0x1ff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd4000000,0x3ff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xd0000000,0x7ff0000)
(WW) fglrx(0): Option "(null)" is not used

ali · Le 10/05/2006, à 13:13

Zb0rG a écrit :

rajoué mais marche toujours pas :S toujours la même érreur...
toujours:
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
mais je pense que c'est du au fait que j'ai mi des option pour la transparence...
je pense pas que l'erreur sois vraiment là mais plutot dans les modules vidéo...
VIVE LE 64 :p

NicoA380 · Le 10/05/2006, à 13:36

ffomnislash a écrit :

j'ai reinstalle une breezy et j'ai un pb avec les drivers ati. Je precise que je les ai deja fait fonctionner sous diverses distribution.
Apres avoir installé les drivers, compiler (make et make_instal) puis configurer avec aticonfig --initial je me retrouve toujours avec mesa.

Tu as bien le paquet restricted module de la même version que ton noyaux ?

ton module fglrx est-il chargé ? ( lsmod | grep fglrx )

ton module fglrx peut-il se charger ? ( sudo modprobe fglrx )

ffomnislash · Le 11/05/2006, à 21:43

ffomnislash@Asgard:/usr/X11R6/bin$ lsmod | grep fglrx
fglrx                 255524  0
agpgart                34792  2 fglrx,intel_agp

Le module est bien chargé

J'ai bien les restricted module d'installer. La compilation ne rale pas. Au debut elle ralée

freud · Le 25/05/2006, à 12:21

salut,
je viens de débuter sous linux, voici mes résultats :

j'ai un P4 2.8GHz, 512 Mo, ATI 9800 Pro

fglrx 245412 7
agpgart 32328 2 sis_agp,fglrx

linux-image-386
linux-image-2.6.12-10-386
linux-image-2.6.12-9-386

merci pour les conseils

ToY · Le 25/05/2006, à 20:32

black_code a écrit :

je pense que si,
j'ai la meme carte sur un autre portable sous windows et j'arrive à faire tourner doom III et America's army sans problème

Oui mais les drivers sous windows sont bien mieux optimisés

klipper · Le 28/05/2006, à 15:33

ouais ils sont sympa a ati mais ca serait mieux qu'il donnent des drivers qui fonctionnent. on vends pas une voiture sans les clefs quand meme !

voila ma config :
amd atlon
chipset via
ati radeon 7000 VE (elle n'est meme pas dans la liste des cartes supportés par le driver)

et l'erreur :

(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.16.20
(II) ATI Proprietary Linux Driver Release Identifier: @@UNRELEASED_AND_UNSUPPORTED_DRIVER@@
(II) ATI Proprietary Linux Driver Build Date: Aug 16 2005 00:15:14
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.16.1-driver-lnx-206829
(EE) No devices detected.

trop drole , le driver ATI semble ne pas trouver ma carte ATI !
un peti lspci me donne :

...
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

et ca ca me donne un beau crash de X !
j'ai beau suivre le tuto (jusqu'a la fin) rien n'y fait

pourtant open gl fonctionnait jadis avec une distro que j'avais acheté il y a 4ans : aurox 9.0

suis-je condamné a me passer de tux racer ;-) ou bien il faut que je continue a metre les mains dans le cambouis ?

ZeBob · Le 28/05/2006, à 15:45

(elle n'est meme pas dans la liste des cartes supportés par le driver)

Bah pourquoi essayes-tu de l'installer alors ?!

klipper · Le 28/05/2006, à 15:54

ben parceque avant l'avais l'acceleration 3D donc ya bien une solution. il faudrait que je me tape la motiv de reinstaller aurox.

ZeBob · Le 28/05/2006, à 16:02

peut-être que les drivers ati libre fonctionne...
http://ftp.x.org/pub/X11R7.0/doc/html/radeon.4.html#toc3
-> il fonctionne yahoo, tu n'a plus qu'à désinstaller tous les paquets propriétaires (fglrx-control, linux-restricted-modules et xorg-driver-fglrx)
puis mettre radeon comme driver dans ton xorg.conf.

Dernière modification par ZeBob (Le 28/05/2006, à 16:08)

Zakann · Le 28/05/2006, à 23:30

Voici ma config, j'ai un Pentium IV 2.93ghz, 1Go de Ram, et une carte intégrée X200 ATI (je ne crois pas que le "express" est compris dans l'intitulé, mais apparemment, je le vois partout dans mes logs de crash de xorg.)

Après plusieurs manipulations, à partir de http://linuxfacile.neuf.fr/astuces/Serv … Ubuntu.htm, j'ai décidé de laisser quelques posts dans le forum.

Malgré un suivi scrupuleux de la manipulation, rien n'y fait, le serveur X crash à chaque fois.

Ici, fglrx est chargé (enfin, je crois, parce que, j'suis un peu re-newbie, ça fait longtemps que j'ai pas remis ma tête dans ubuntu):

zakann@great:~$ lsmod |grep fglrx
fglrx                 479996  0
agpgart                36784  3 intel_agp,fglrx,ati_agp

Ici, vous avez ma config xorg (oh, qu'ai je lutter pour faire fonctionner ma tablette graphire4! bon maintenant, y a plus que la roulette et les deux boutons à faire fonctionner...)

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen"
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "IMPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "AL1716"
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 160.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon Xpress 200 (RC410)"
	Driver      "ati"
	BusID       "PCI:1:5:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon Xpress 200 (RC410)"
	Monitor    "AL1716"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Je vois très nettement que j'ai deux choix de config pour l'affichage graphique, j'ai remis DefaultScreen en nano pour pouvoir relancer gdm.

Les paquets installés, pour fglrx, sont :
linux-restricted-modules.2.6.15-23.686;
linux-image-2.6.15-23.686, linux-image-686;
fglrx-control (8.25.18-1), fglrx-kernel-2.6.15-23-686, fglrx-kernel-source,xorg-driver-fglrx (8.25.18-1),
et bien évidemment, pour le secours, xserver-xorg-driver-ati (1:6.5.7.3-0ubuntu7).

Voilà, si quelqu'un voit la nature de mon problème. N'hésitez pas à me faire signe.

Merci d'avance.
Zakann

Zakann · Le 28/05/2006, à 23:42

Oh, j'ai oublié de vous dire que je tourne sur la release candidate de Dapper.

Et, je vous mets mon crash log:

[...]
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 28 23:48:57 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "AL1716"
(**) |   |-->Device "ATI Technologies, Inc. Radeon Xpress 200 (RC410)"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
[....]
(II) ATI: ATI driver (version 6.5.8) for chipsets: ati, ativga
[...]ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
[...]	
(II) Primary Device is: PCI 01:05:0
(II) ATI:  Candidate "Device" section "ATI Technologies, Inc. Radeon Xpress 200 (RC410)".
(--) Chipset ATI Radeon XPRESS 200 5A61 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[...]
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 4.0.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) resource ranges after probing:
	[...]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xd9000000
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5A61 (PCIE)" (ChipID = 0x5a61)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(II) RADEON(0): PCI card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card15
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card16
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card17
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card18
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card19
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card20
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card21
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card22
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card23
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card24
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card25
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card26
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card27
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card28
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card29
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card30
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card31
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card32
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card33
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card34
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card35
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card36
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card37
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card38
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card39
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card40
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card41
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card42
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card43
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card44
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card45
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card46
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card47
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed

[etc jusqu'à /dev/dri/card225]

drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): Detected total video RAM=7168K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 7168 kByte (256 bit DDR SDRAM)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType-1, ConnectorType-4
(II) RADEON(0): Connector1: DDCType-4, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- CRT2_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- DVI-D
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- External
 DDC Type  -- NONE
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=20000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): AL1716: Using hsync range of 30.00-70.00 kHz
(II) RADEON(0): AL1716: Using vrefresh range of 50.00-160.00 Hz
(II) RADEON(0): Clock range:  20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) RADEON(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) RADEON(0):  Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x800"   83.46  1280 1344 1480 1680  800 801 804 828
(**) RADEON(0):  Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) RADEON(0):  Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x768"   80.14  1280 1344 1480 1680  768 769 772 795
(**) RADEON(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) RADEON(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) RADEON(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) RADEON(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) RADEON(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) RADEON(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) RADEON(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) RADEON(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) RADEON(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) RADEON(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) RADEON(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) RADEON(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) RADEON(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) RADEON(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) RADEON(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(==) RADEON(0): DPI set to (75, 75)
[... concernant le module fb]
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x00700000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81fee70)
(**) RADEON(0): Read: 0x00180006 0x0003005f 0x00000000
(**) RADEON(0): Read: rd=6, fd=95, pd=3
(**) RADEON(0): RADEONSaveMode returns 0x81fee70
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x00700000
(**) RADEON(0):   agp_size         : 0x081fed48
(**) RADEON(0):   agp_base         : 0x081fed48
(**) RADEON(0):   MC_FB_LOCATION   : 0x3fff3e00
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x1024     108.00  1280 1328 1440 1688  1024 1025 1028 1066 (24,32) +H +V
1280x1024     108.00  1280 1328 1440 1688  1024 1025 1028 1066 (24,32) +H +V
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(**) RADEON(0): dc=10800, of=21600, fd=91, pd=2
(**) RADEON(0): RADEONInit returns 0x81ff820
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81ff820)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0x3fff3e00
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x00000006 0x0001005b 0x00000000 (0x0000a400)
(**) RADEON(0): Wrote: rd=6, fd=91, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 20004c4c to 20257c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): Memory manager initialized to (0,0) (1280,1433)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 407
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 403
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
error opening security policy file /etc/X11/xserver/SecurityPolicy
[... concernant le chargement de ma tablette graphire4]
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0)

Voilà, c'est tout ce que j'ai...

kakyo · Le 29/05/2006, à 14:51

Nickel ça marche.

fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON X700 Generic
OpenGL version string: 2.0.5755 (8.24.8)

glxgears -printfps
22677 frames in 5.0 seconds = 4535.369 FPS
22652 frames in 5.0 seconds = 4530.367 FPS
22649 frames in 5.0 seconds = 4529.653 FPS
22588 frames in 5.0 seconds = 4517.438 FPS
22636 frames in 5.0 seconds = 4527.089 FPS

fgl_glxgears
Using GLX_SGIX_pbuffer
3470 frames in 5.0 seconds = 694.000 FPS
3897 frames in 5.0 seconds = 779.400 FPS
4070 frames in 5.0 seconds = 814.000 FPS
4058 frames in 5.0 seconds = 811.600 FPS
4059 frames in 5.0 seconds = 811.800 FPS
4069 frames in 5.0 seconds = 813.800 FPS
4071 frames in 5.0 seconds = 814.200 FPS

zakann · Le 30/05/2006, à 11:22

Bon, alors, finalement, j'ai réussi à faire tourner mon fglrx.
Cependant, le serveur X ne se lance pas à cause d'une erreur:

dans /var/log/Xorg.0.log:

(WW) fglrx(0): board is an unknown third party board, chipset is supported

savez-vous ce que c'est?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#351 Le 02/04/2006, à 17:40

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#352 Le 07/04/2006, à 11:40

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#353 Le 08/04/2006, à 18:37

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#354 Le 09/04/2006, à 10:11

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#355 Le 14/04/2006, à 09:08

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#356 Le 15/04/2006, à 20:33

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#357 Le 19/04/2006, à 10:02

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#358 Le 24/04/2006, à 15:20

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#359 Le 24/04/2006, à 16:25

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#360 Le 25/04/2006, à 20:31

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#361 Le 08/05/2006, à 10:26

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#362 Le 09/05/2006, à 21:10

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#363 Le 10/05/2006, à 13:13

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#364 Le 10/05/2006, à 13:36

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#365 Le 11/05/2006, à 21:43

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#366 Le 25/05/2006, à 12:21

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#367 Le 25/05/2006, à 20:32

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#368 Le 28/05/2006, à 15:33

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#369 Le 28/05/2006, à 15:45

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#370 Le 28/05/2006, à 15:54

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#371 Le 28/05/2006, à 16:02

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#372 Le 28/05/2006, à 23:30

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#373 Le 28/05/2006, à 23:42

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#374 Le 29/05/2006, à 14:51

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

#375 Le 30/05/2006, à 11:22

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Pied de page des forums