Ubuntu-fr

Zb0rG

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

rajoué mais marche toujours pas :S toujours la même érreur...
toujours:

(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

mais je pense que c'est du au fait que j'ai mi des option pour la transparence...
je pense pas que l'erreur sois vraiment là mais plutot dans les modules vidéo...
VIVE LE 64

Zb0rG

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

voici le log du boot:

000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
No mptable found.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f7b00
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff30c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Checking aperture...
CPU 0: aperture @ a0000000 size 512 MB
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=tty0 quiet splash
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2009.179 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 507536k/524224k available (1585k kernel code, 15892k reserved, 1008k data, 132k init)
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
ACPI: Looking for DSDT in initrd... not found!
ACPI: setting ELCR to 0200 (from 0cb8)
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.557 MHz APIC timer.
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 512M @ 0xa0000000
PCI-DMA: Disabling IOMMU.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1113589939.204:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, khubd not stopped
 Strange, kswapd0 not stopped
 Strange, kseriod not stopped
 done
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3988KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (52 C)
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.10 loaded.
sata_nv version 0.5
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:09.0 to 64
ata1: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xDA00 irq 10
ata2: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xDA08 irq 10
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 160086528 sectors:
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
elevator: using anticipatory as default io scheduler
  Vendor: ATA       Model: Maxtor 6Y080M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 11
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 11
ata3: no device found (phy stat 00000000)
scsi2 : sata_nv
ata4: no device found (phy stat 00000000)
scsi3 : sata_nv
SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Stopping tasks: ===|
Freeing memory... done (455 pages freed)
Restarting tasks... done
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 931760k swap on /dev/sda4.  Priority:-1 extents:1
EXT3 FS on sda1, internal journal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 425 MBytes.
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 7 (level, low) -> IRQ 7
[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
lp: driver loaded but no devices found
mice: PS/2 mouse device common for all mice
Losing some ticks... checking if CPU frequency changed.
input: PS/2 Generic Mouse on isa0060/serio1
Real Time Clock Driver v1.12
ieee1394: Initialized config rom entry `ip1394'
ts: Compaq touchscreen protocol output
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker
inserting floppy driver for 2.6.10-5-amd64-generic
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: PCI device 10de:00e7 (nVidia Corporation)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem 0xd2003000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.1[b] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.1: PCI device 10de:00e7 (nVidia Corporation)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 11, pci mem 0xd2004000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: PCI device 10de:00e8 (nVidia Corporation)
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem 0xd2005000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:05.0 to 64
eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:05.0
eth0: no link during initialization.
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49905 usecs
intel8x0: clocking to 46816
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
NFORCE3-250: port 0x01f0 already claimed by ide0
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide1...
NET: Registered protocol family 17
eth0: link up.
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 4 (level, low) -> IRQ 4
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[4]  MMIO=[d1000000-d10007ff]  Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00012920000110e9]
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80350ec0(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: BIOS error - no PSB
input: PS2++ Logitech MX Mouse on isa0060/serio1
eth0: no IPv6 routers present

:S moi je vois pas trop ou ça fume...
tout est chargé.

même si un lsmod:

Module                  Size  Used by
psmouse                21260  0
proc_intf               4484  0
freq_table              4872  0
cpufreq_userspace       5456  0
cpufreq_ondemand        7340  0
cpufreq_powersave       2304  0
video                  18824  0
sony_acpi               6928  0
pcc_acpi               13696  0
button                  7840  0
battery                11528  0
container               5248  0
ac                      5768  0
ipv6                  252960  9
ohci1394               34180  0
shpchp                 95528  0
pci_hotplug            33240  1 shpchp
af_packet              22412  2
amd74xx                15280  1
snd_intel8x0           34368  2
snd_ac97_codec         76704  1 snd_intel8x0
snd_pcm_oss            53668  1
snd_mixer_oss          19072  2 snd_pcm_oss
snd_pcm                96012  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              24968  1 snd_pcm
snd                    55400  6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              11168  3 snd
snd_page_alloc         10888  2 snd_intel8x0,snd_pcm
forcedeth              18176  0
ehci_hcd               31620  0
ohci_hcd               21384  0
floppy                 62320  0
pcspkr                  4088  0
md                     46592  0
dm_mod                 59608  1
capability              5896  0
commoncap               9344  1 capability
sbp2                   26248  0
evdev                  10368  0
tsdev                   8704  0
ieee1394              112984  2 ohci1394,sbp2
rtc                    13064  0
mousedev               12764  1
parport_pc             39496  0
lp                     12784  0
parport                39436  2 parport_pc,lp
ide_generic             1792  0
ide_disk               19584  0
ide_cd                 42760  0
ide_core              143748  4 amd74xx,ide_generic,ide_disk,ide_cd
fglrx                 262240  0
ext3                  133264  3
jbd                    57648  1 ext3
sr_mod                 17572  0
cdrom                  41384  2 ide_cd,sr_mod
sd_mod                 17688  5
sata_nv                 9732  8
libata                 52488  1 sata_nv
scsi_mod              138200  4 sbp2,sr_mod,sd_mod,libata
unix                   28736  902
thermal                15756  0
processor              26560  1 thermal
fan                     5384  0
fbcon                  36512  0
font                    9088  1 fbcon
bitblit                 5632  1 fbcon
vesafb                  7616  0
cfbcopyarea             4352  1 vesafb
cfbimgblt               3200  1 vesafb
cfbfillrect             4224  1 vesafb

donc le
fglrx                 262240  0
n'est pas utilisé :S

flûte...

NaWer

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Merci a ce post-it ultra utile :
erwan@NaWer:~$ glxgears
10024 frames in 5.0 seconds = 2004.800 FPS
10395 frames in 5.0 seconds = 2079.000 FPS
10386 frames in 5.0 seconds = 2077.200 FPS
erwan@NaWer:~$ fgl_glxgears
1737 frames in 5.0 seconds = 347.400 FPS
2071 frames in 5.0 seconds = 414.200 FPS
erwan@NaWer:~$

2200+ - 512 - Radeon 9500 Pro 128Mo - Assus a7n8x deluxe Nforce2.

J'ai utiliser la section "ca ne marche toujours pas ?"

et maintenant, ca marche.

Skander

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Salut à tous... Comme convenu, voici mes perf' :

$ glxgears
6383 frames in 5.0 seconds = 1276.600 FPS
6653 frames in 5.0 seconds = 1330.600 FPS
6653 frames in 5.0 seconds = 1330.600 FPS
6652 frames in 5.0 seconds = 1330.400 FPS
6653 frames in 5.0 seconds = 1330.600 FPS

$fgl_glxgears
1128 frames in 5.0 seconds = 225.600 FPS
1343 frames in 5.0 seconds = 268.600 FPS
1333 frames in 5.0 seconds = 266.600 FPS
1336 frames in 5.0 seconds = 267.200 FPS
1341 frames in 5.0 seconds = 268.200 FPS

La machine : IBM T42p (2373 HTG)
Version du driver : 8.08.25

Félicitations pour le tuto...

Skander

frusciante8

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour Bonjour
Merci pour le howto pour l'instant j'aurais presque reussi facilement mais :

Barton 3000+, Asus A7N8X-E Deluxe, 1Go DDR400, ATI Radon 9600 128Meg :

# glxgears
3224 frames in 5.0 seconds = 644.800 FPS
3478 frames in 5.0 seconds = 695.600 FPS
3470 frames in 5.0 seconds = 694.000 FPS
3476 frames in 5.0 seconds = 695.200 FPS
3458 frames in 5.0 seconds = 691.600 FPS

# fgl_glxgears
596 frames in 5.0 seconds = 119.200 FPS
709 frames in 5.0 seconds = 141.800 FPS
767 frames in 5.0 seconds = 153.400 FPS

Moi xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
##	Load	"extmod"
	SubSection "extmod"
		Option	"omit xfree86-tga"
	EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"be"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 9600 SE (RV350 AQ)"
	Driver		"fglrx"
	Option		"UseInternalAGPGART" "no"
	BusID		"PCI:3:0:0"
EndSection

Section "Monitor"
	Identifier	"996FS"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 9600 SE (RV350 AQ)"
	Monitor		"996FS"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

J'ai aussi ds mon /etc/modules

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

nvidia-agp
fglrx
ide-cd
ide-disk
ide-generic
lp
mousedev
psmouse
sbp2
sr_mod

Je sais pas trop ce que je dois faire maintenant ...
Mes linux-restricted-modules sont installés ...

Merci d'avance ^^

cyprien

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

glxgears : 1196
fgl_glxgears : 259
AMD XP 2600+
1 GO de RAM
Carte ATI Saphire 9600 pro (128 Mo)

Snipy

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Félicitations pour le tuto ! Installation en 2min30 chrono et résultat:
glxgears :
12808 frames in 5.0 seconds = 2561.600 FPS
12835 frames in 5.0 seconds = 2567.000 FPS
13479 frames in 5.0 seconds = 2695.800 FPS
13479 frames in 5.0 seconds = 2695.800 FPS
13478 frames in 5.0 seconds = 2695.600 FPS
13479 frames in 5.0 seconds = 2695.800 FPS

fgl_glxgears:
2265 frames in 5.0 seconds = 453.000 FPS
2568 frames in 5.0 seconds = 513.600 FPS
2671 frames in 5.0 seconds = 534.200 FPS
2774 frames in 5.0 seconds = 554.800 FPS
2797 frames in 5.0 seconds = 559.400 FPS
2781 frames in 5.0 seconds = 556.200 FPS
2796 frames in 5.0 seconds = 559.200 FPS
2777 frames in 5.0 seconds = 555.400 FPS
2771 frames in 5.0 seconds = 554.200 FPS

Tout ça avec une Radeon 9700Pro, 512Mo de Ram et un AMD64 3200+ S754

Quand je pense que j'étais jamais arrivé à charger fglrx sous ma MDK 10.0

PS: il n'y a pas eu besoin de titiller l'agpgart chez moi...en fait même pas besoin d'installer les modules linux-restricted...ils y étaient déjà par défaut !

---

Boulet-on-ice....

topgun

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Kagou moi je te remercie chaleureusement car j'ai réussi a avoir ce que je veux : mon double affichage tv
Donc tout est parfait

---

Pour passionnés du son !

Hargo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Ca ne semble pas marcher sur Mac (impossible d'installer les paquets cités avec apt-get, ils sont inconnus).

MAJ: solution sur http://ubuntuforums.org/showthread.php?t=29381

Dernière modification par Hargo (Le 25/04/2005, à 15:27)

Kagou

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Ca ne semble pas marcher sur Mac (impossible d'installer les paquets cités avec apt-get, ils sont inconnus).

Offre moi un Mac et je me ferai un plaisir de chercher la soluce

---

«black-out» du Net français

http://www.laquadrature.net/HADOPI

Charly

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Salut à tous,
je suis nouvelle dans le monde de Linux et d'Ubuntu (on me l'a conseillé et j'étais curieuse) et j'ai bien sûr quelques petits soucis !!!! C'est pourquoi vous me retrouverez sans doute dans d'autres rubriques de ce forum !!!!!
Mais pour l'instant je viens dire merci à Kagou pour son tuto.... merci Kagou !

Donc pour un ordi portable
Athlon AMD64 3000+
512 RAM
carte ATI Raedon Mobility M10 9700 Generic
pilotes 8.08.25

voici les résultats à glxgears :  7899 frame in 5s = 1579,800 FPS
et pour fgl_glxgeras : 1515 frame in 5s = 303,000 FPS

PS : Chez moi, les "linux-restricted-modules" étaient déjà installés.

Antauxnid

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

bonjour a tous

Tout d'abord super tuto car niveau installation je pense que ca a marché impec ( l'accéleration semble bien présente)
Mon soucis c'est que je n'arrive toujours pas à activer ma sortie TV

J'ai tout fait comme il fallait mais lorsque qu'a l'aide de l'utilitaire fireglcontrol je tente d'activer la sortie tv en mode clone, il me dit de redemarrer le serveur x pour appliquer les modifs, je reboot et oh suprise c'est comme si rien n'avait changé.
Pourtant lors du boot du pc il y a bien double affichage ( tv et moniteur) mais dès que ca passe à la fenêtre d'accueil, il n'y a plus d'affichage sur la tv !

config :

XP 2600+
512mo de ram
carte vidéo : Sapphire ATI 9100 64mo
carte mere : Abit Nfs-7 rev 2.0
ubuntu hoary

mon fichier xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
#    	Load    "extmod"
    	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
	SubSection "extmod"
        		Option    "omit xfree86-dga"
    	EndSubSection
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr-latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 9100 (R200 QM)"
	Driver		"fglrx"
	BusID		"PCI:2:0:0"
	Option        "UseInternalAGPGART"    "no"
EndSection

Section "Monitor"
	Identifier	"Q773"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 9100 (R200 QM)"
	Monitor		"Q773"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

Ne devrais-je pas "déclarer" ma tv dans le fichiers xorg.conf. Si oui un peu d'aide serait la bienvenue car je débute sous linux depuis peu. J'ai bien essayé avec le "fglrxconfig" mais je capte pas grand chose...

merci par avance

julien62

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

julien@ju:~$ glxgears
15016 frames in 5.0 seconds = 3003.200 FPS
16725 frames in 5.0 seconds = 3345.000 FPS
16660 frames in 5.0 seconds = 3332.000 FPS
julien@ju:~$ fgl_glxgears
3122 frames in 5.0 seconds = 624.400 FPS
3340 frames in 5.0 seconds = 668.000 FPS

ati Radeon 9800 PRO
AMD Barton 3200+

Merci

cyberlab

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Merci beaucoup à Kagou d'avoir fait ce post INDISPENSABLE ! Je pense même qu'il devrait figurer en sticky tellement ce problème concerne du monde (en gros tous les possesseurs de carte ATI, ça fait bcp !)

Même chez moi avec une modeste 9200SE (oui, j'ai honte) mes perfs ont sextuplé. Je les affiche quand même pour figurer dans le top-nul de ce post :
-------------
glxgears
8143 frames in 5.0 seconds = 1628.600 FPS
8144 frames in 5.0 seconds = 1628.800 FPS
8144 frames in 5.0 seconds = 1628.800 FPS
8145 frames in 5.0 seconds = 1629.000 FPS
8142 frames in 5.0 seconds = 1628.400 FPS

contre environ 271 FPS auparavant !
---------------
fgl_glxgears
697 frames in 5.0 seconds = 139.400 FPS
760 frames in 5.0 seconds = 152.000 FPS
742 frames in 5.0 seconds = 148.400 FPS
760 frames in 5.0 seconds = 152.000 FPS
751 frames in 5.0 seconds = 150.200 FPS

Ola
Bravo pour ce post, plus simple y'a pas !!
Pourrais-tu préciser ta config, car étant aussi pocesseur d'une 9200 SE mes résultats au glxgears sont sont vraiment en dessous des tiens.

PIII 900
512 Mo SDRAM 133
RADEON 9200 SE 64 Mo
UBUNTU 5.04 sous GNOME
1152x864 à 75MHz
--------------
fireglcontrol
--------------
Display Adaptater
    Card Name: Radeon9200SE
    Bios Version: 8.15
    Chip Type: ATI Radeon 9200SE (RV280 Yd)
    Chip Revision:    A12
    DAC Speed: 400 Mhz
    Memory Type: DDR SDRAM
    Memory Size: 64 Mbyte
    Transfer Mode: AGP 4x, SBA (AGP v2.0)
Display Driver
    Driver Version: 8.08.25
OpenGl
    OpenGL vendor string: ATI Technologies Inc.
    OpenGL renderer string:  RADEON 9200SE DDR Generic
    OpenGL version string: 1.3.4769 (X4.3.0-8.8.25)   
--------------
glxgears
--------------
3762 frames in 5.0 seconds = 752.400 FPS
3761 frames in 5.0 seconds = 752.200 FPS
3761 frames in 5.0 seconds = 752.200 FPS
3761 frames in 5.0 seconds = 752.200 FPS
3761 frames in 5.0 seconds = 752.200 FPS
3761 frames in 5.0 seconds = 752.200 FPS
3760 frames in 5.0 seconds = 752.000 FPS
3699 frames in 5.0 seconds = 739.800 FPS
--------------
fgl_glxgears
--------------
672 frames in 5.0 seconds = 134.400 FPS
686 frames in 5.0 seconds = 137.200 FPS
688 frames in 5.0 seconds = 137.600 FPS
674 frames in 5.0 seconds = 134.800 FPS
691 frames in 5.0 seconds = 138.200 FPS
687 frames in 5.0 seconds = 137.400 FPS
676 frames in 5.0 seconds = 135.200 FPS
694 frames in 5.0 seconds = 138.800 FPS

---

http://taltan.free.fr/

gouby

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

salut vous tous

contrairement à la majorité il a fallu que j'aill jusqu'a la solution finale pour que mes fps passent le 200:/

maintenant tout est ok:
matériel: radeon 9800 pro, ecsk7s5a, ddr 768mo

fgl_glxgears
2727 frames in 5.0 seconds = 545.400 FPS
3085 frames in 5.0 seconds = 617.000 FPS
3675 frames in 5.0 seconds = 735.000 FPS
3511 frames in 5.0 seconds = 702.200 FPS
3659 frames in 5.0 seconds = 731.800 FPS

glxgears
13923 frames in 5.0 seconds = 2784.600 FPS
16108 frames in 5.0 seconds = 3221.600 FPS
16110 frames in 5.0 seconds = 3222.000 FPS
16057 frames in 5.0 seconds = 3211.400 FPS
16275 frames in 5.0 seconds = 3255.000 FPS

par contre je ne peut pas acceder à la gestion de la résolution d'écran, j'ai une erreure de type: Le serveur X ne supporte pas l'extension XRandR. Le changement de résolution à la volée n'est pas disponible.

---

Proc: AMD Phenom II X4 965 Black Edition   CM: Gigabyte GA-790XTA-UD4 (AMD 790X) - ATX  CG:  GeForce GTX 460   Ram: 8 Go (kit 4x 2 Go) DDR3-SDRAM PC3-10600
Ubuntu 14.10 -

gouby

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

ok un redemarrage à résolu le soucis tout va bien:)

---

Proc: AMD Phenom II X4 965 Black Edition   CM: Gigabyte GA-790XTA-UD4 (AMD 790X) - ATX  CG:  GeForce GTX 460   Ram: 8 Go (kit 4x 2 Go) DDR3-SDRAM PC3-10600
Ubuntu 14.10 -

Gbinks

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Alors un trééééééééés grand merdi a l'auteur de ce post.
Un vrai jeu d'enfant !

J'ai installé Ubuntu hier, sur mon portable (CL56 / xb7v-2), et ce matin je me suis  dit que comme ça c'était passé sans problème, j'allais testé les fglrx.

je trouve le post, j'essai, je reboot ... et la :

gbinks@gbportable:~$ glxgears
6593 frames in 5.0 seconds = 1318.600 FPS
7019 frames in 5.0 seconds = 1403.800 FPS
7017 frames in 5.0 seconds = 1403.400 FPS
7017 frames in 5.0 seconds = 1403.400 FPS
gbinks@gbportable:~$ fgl_glxgears
1163 frames in 5.0 seconds = 232.600 FPS
1415 frames in 5.0 seconds = 283.000 FPS
1410 frames in 5.0 seconds = 282.000 FPS
1409 frames in 5.0 seconds = 281.800 FPS
1399 frames in 5.0 seconds = 279.800 FPS

Ma config :
- Dothan 1.7GHz
- 1Go de ram ddr333
- Radeon 9700 + 128Mo dédiés
- 1400x1050

Wala

Encore merci

fabe_mo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour all

Apres avoir suivi se tuto qui, je n'en doute pas, doit etre tres bon, je ne parviens pas a dépasser ces fps minuscules...

j'ai comme config (portable) :
P4 3.2 HT
512 DDRam
ATI Mobility 9700 128 Mo
2.6.10-5-686

j'ai edité tout ce qui etait editable,
installé tout ce qui devait l'etre

et la commande:  lsmod | grep fg
me donne:
fglrx                 237088  0

Le glxgears est tellement bas que j'aurai presque peur de vous le dire :

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
834 frames in 5.0 seconds = 166.800 FPS
777 frames in 5.0 seconds = 155.400 FPS

Etant nouveau sur ubuntu, j'ai surement du faire une c... betise mais, je vois pas ou..

Merci les gens

Dernière modification par fabe_mo (Le 28/04/2005, à 16:08)

coffee

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

il te manquerait pas un load DRI?

---

Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)

fabe_mo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

euuuh... :$

surement, mais, je fais comment ce "load DRI" ? :$

coffee

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

tu le rajoutes avec les autres load dans le /etc/X11/xorg.conf

---

Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)

fabe_mo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

arf ::/

C'est pas ca,  j'ai bien un    load  "dri" 

Une autre idee? :$

Dernière modification par fabe_mo (Le 28/04/2005, à 21:16)

Sug

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour all

Apres avoir suivi se tuto qui, je n'en doute pas, doit etre tres bon, je ne parviens pas a dépasser ces fps minuscules...

j'ai comme config (portable) :
P4 3.2 HT
512 DDRam
ATI Mobility 9700 128 Mo
2.6.10-5-686

j'ai edité tout ce qui etait editable,
installé tout ce qui devait l'etre

et la commande:  lsmod | grep fg
me donne:
fglrx                 237088  0

Le glxgears est tellement bas que j'aurai presque peur de vous le dire :

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
834 frames in 5.0 seconds = 166.800 FPS
777 frames in 5.0 seconds = 155.400 FPS

Etant nouveau sur ubuntu, j'ai surement du faire une c... betise mais, je vois pas ou..

Merci les gens

Je te rejoins, j'ai tout pareil, j'ai bien tout essayé et tout suivi à la lettre, mais j'ai la même erreur que toi sur le glxgears : Xlib:  extension "XFree86-DRI" missing on display ":0.0".
...Et le  fgl_glxgears me sort ça :

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  143 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30

J'enrage....:mad:

Sug

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Rhaaa Je viens de trouver pourquoi.... J'avais dans mon xorg.conf une section

Section "Extensions"
        Option  "Composite"     "Enable"
EndSection

...que je dois commenter pour que ça fonctionne!

En fait c'est le /var/log/xorg.0.log qui le disait noir sur blanc... bref.:rolleyes:

Et je peux enfin annoncer mes résultats avec ma config :

Athlon XP 2800+ Barton
1Go de RAM pc3200
Radeon 9600 pro 256 Mo DDR
1024x768 (bah oui, vieil ecran) 75Hz

fgl_glxgears :
1607 frames in 5.0 seconds = 321.400 FPS
1679 frames in 5.0 seconds = 335.800 FPS
1707 frames in 5.0 seconds = 341.400 FPS

glxgears :
22978 frames in 5.0 seconds = 4595.600 FPS
23125 frames in 5.0 seconds = 4625.000 FPS
22822 frames in 5.0 seconds = 4564.400 FPS

youplaboum 

sksbir

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bravo pour ce post tres bien fait.

J'ai suivi les étapes suivantes:
- ajout des modules linux-image-2.6.10-5-686 version 2.6.10.34, et linux-image-686 version 2.6.10-7 (je ne sais pas pq, j'avais que les "386" )
- ajout des modules
linux-restricted-modules-2.6.10-5-686
et
linux-restricted-modules-686

(idem avec les versions 386,par sécurité...)

Ajout dans /etc/modules:
agpgart
sis-agp
fglrx

modification dans /etc/X11/xorg.conf
79c79
<       Driver          "ati"
---
>       Driver          "fglrx"
80a81
>       Option "UseInternalAGPGART"         "no"

resultat:

glxgears
7096 frames in 5.0 seconds = 1419.200 FPS
7932 frames in 5.0 seconds = 1586.400 FPS
7932 frames in 5.0 seconds = 1586.400 FPS
7932 frames in 5.0 seconds = 1586.400 FPS
7933 frames in 5.0 seconds = 1586.600 FPS
( environ 250-300 auparavent)

fgl_glxgears
1262 frames in 5.0 seconds = 252.400 FPS
1582 frames in 5.0 seconds = 316.400 FPS
1576 frames in 5.0 seconds = 315.200 FPS
1579 frames in 5.0 seconds = 315.800 FPS

matériel : Gericom cinema XXL : P4 3Ghz + ATI radeon mobility 9700.

fireglcontrol raconte ceci:
Card Name : RAdeon Mobility M10
bios version: 8.17
Chip Type : ATI RAdeon mobility M10
Revision A13
DAC speed 400Mhz
memory type : DDR SDRAM
Memory size : 128Mb
Transfer mode : AGP 8x,SBA(AGP v3.0 native...

Display Driver
Driver version : 8.08.25

Opengl (les infos sont plus lisibles avec fglrxinfo)
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.4769 (X4.3.0-8.8.25)

Je n'ai pas installé ce qui permet de changer la résolution de l'écran: c'est un LCD de 1440x900 qui a été détecté comme ça dès le début de l'installation, et je ne vois aucun intéret d'en changer...

Encore merci. rien que l'aperçu des economiseurs d'écrans m'a fait saliver, c'est dire...:P

---

Les quadrirotors