Fenêtre login et mot de passe interminable à apparaître...

Ansuz · Le 01/01/2010, à 12:06

Salut à tous,

Pour la troisième fois, lorsque je démarre karmic, le système se lance normalement, mais de temps à autre la fenêtre de login et mot de passe n'apparaît plus... ensuite s'en suit le logo Ubuntu et la barre de mémoire, puis plus rien excepté le fond d'écran vide maculé de teintes à dominantes brunes.
J'ai toujours le contrôle souris (mais rien de cliquable) et clavier.
Comme la commande "ctrl+alt+retour" ne semble plus fonctionner sous karmic, j'effectue alors un "ctrl+alt+F1" afin de passer en mode console, un "sudo startx" me renvoie que le serveur graphique est déjà en fonction, donc "sudo reboot". Parfois ça reboote normalement, parfois ça récidive...
Je précise que ce comportement est aléatoire, et ne m'était jamais arrivé sous les versions antérieures.

Asus P5B Deluxe, Core 2 Duo E6600 @3Ghz, ram 4Go DDR2, geforce GTX275 896Mo, Seasonic M12 700w

Dernière modification par Ansuz (Le 03/01/2010, à 11:31)

Malizor · Le 01/01/2010, à 13:12

Salut,

Pour ton problème je ne sais pas, mais sinon tu peux utiliser « ctrl+alt+imp écran+k » en remplacement de « ctrl+alt+retour ».

Ansuz · Le 01/01/2010, à 13:42

Malaria a écrit :

Salut,
Pour ton problème je ne sais pas, mais sinon tu peux utiliser « ctrl+alt+imp écran+k » en remplacement de « ctrl+alt+retour ».

Merci pour l'info en tout cas, j'en prends bonne note.

Ansuz · Le 02/01/2010, à 10:50

Aujourd'hui, je lance ma machine, et ça recommence:
Mais cette fois, après le test mémoire, j'ai attendu... et une dizaine de minutes plus tard, la fenêtre de login est réapparue mais par étapes successive !
J'ai enfin pu démarrer, mais arrivé sur le bureau, message d'erreur :

Le tableau de bord a rencontré un problème lors du chargement de « OAFIID:GNOME_FastUserSwitchApplet ».Voulez-vous supprimer l'applet de votre configuration ?

Dans le doute, j'ai répondu non, ne sachant pas très bien la fonction exact de cet applet.

Personne ne peux m'aider à me sortir de ce mauvais pas ?

Malizor · Le 02/01/2010, à 11:03

Je ne suis pas convaincu qu'il y ai un lien de cause à effet, il est aussi possible que cet applet (c'est celui avec ton nom, en haut à droite normalement) est choisi de planté au mauvais moment.

Tu peux l'enlever pour tester si tu veux, tu pourra le remettre facilement via un clic droit sur le tableau de bord → ajouter au tableau de bord → Applet de notification de session.

ps: c'est également le menu qui te permet d'éteindre/redémarrer. Si tu l'enlève, ces commandes apparaitrons dans le menu système.

Ansuz · Le 02/01/2010, à 12:03

Je viens de tenter un reboot:
En fait, passé le test mémoire avec le logo ubuntu, la fenêtre de connexion est très, très, très, longue à arriver... du style 5 minutes au moins. D'abord apparaissent un rectangle noir, puis l'en-tête, puis le login, puis l'invite du mot de passe !
Alors, je parviens à lancer le bureau.
Petite bonne nouvelle, la fenêtre d'erreur à disparue, et le bouton applet-session à retrouvé sa place tout seul.

C'est quoi ce délire ?
Qu'est-ce qui tout à coup peut ralentir à ce point le chargement au démarrage ?
J'ajoute que je n'ai rien modifié matériellement parlant, ni installé de nouveaux softs dernièrement...

Si j'étais sous windows, ça sentirait bon le virus ou autre réjouissance, mais sous linux ???

Malizor · Le 02/01/2010, à 12:16

Et tu as un test de mémoire à chaque reboot ?

(et c'est pas plutôt un test du disque dur ?)

Ansuz · Le 02/01/2010, à 12:35

Malaria a écrit :

Et tu as un test de mémoire à chaque reboot ?
(et c'est pas plutôt un test du disque dur ?)

Non, je me suis mal exprimé, je veux parler du curseur qui fait des aller retour sous le logo "ubuntu" lors du boot.
Non, ce n'est pas un test de disque dur, dans ce cas là, c'est normal que ça prenne du temps.

Malizor · Le 02/01/2010, à 12:41

Ça peut être un problème lié au pilote graphique.
Tu as installé un pilote proprio ?

Donne moi le résultat de la commande suivante (après un démarrage foireux)

dmesg

(entre balises code, parce qu'il va te sortir un truc énorme)

Ansuz · Le 02/01/2010, à 13:15

Aprés avoir réalisé un memtest86 afin de tester mes barettes de ram, aprés une dizaine de minutes, aucune erreur trouvée.
J'ai redémarré, et là miracle ! ça fonctionne de nouveau normalement ? (je doute que memtest y soit pour quelque chose)
J'ai alors rebooté trois fois de suite pour voir, tout semble de nouveau normal...
Ma carte graphique est une geforce GTX275, et j'utilise le driver Nvidia 185.18.36

Voici le résultat de la commande dmesg à tout hasard, mais à priori suite à un boot correct. Dis-moi ce que tu en penses:

[    0.245178] pci_bus 0000:01: resource 1 mem: [0xf8700000-0xfe7fffff]
[    0.245179] pci_bus 0000:01: resource 2 pref mem [0xbfe00000-0xdfdfffff]
[    0.245181] pci_bus 0000:04: resource 2 pref mem [0xdfe00000-0xdfefffff]
[    0.245183] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.245185] pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.245186] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.245188] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.245190] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.245191] pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.245193] pci_bus 0000:05: resource 2 pref mem [0xbc000000-0xbc0fffff]
[    0.245195] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.245196] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.245217] NET: Registered protocol family 2
[    0.245280] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.245476] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.245720] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.245836] TCP: Hash tables configured (established 131072 bind 65536)
[    0.245840] TCP reno registered
[    0.245886] NET: Registered protocol family 1
[    0.245926] Trying to unpack rootfs image as initramfs...
[    0.385443] Freeing initrd memory: 8430k freed
[    0.387981] cpufreq-nforce2: No nForce2 chipset.
[    0.388005] Scanning for low memory corruption every 60 seconds
[    0.388105] audit: initializing netlink socket (disabled)
[    0.388118] type=2000 audit(1262436907.388:1): initialized
[    0.393846] highmem bounce pool size: 64 pages
[    0.393851] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.394843] VFS: Disk quotas dquot_6.5.2
[    0.394885] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.395256] fuse init (API version 7.12)
[    0.395313] msgmni has been set to 1681
[    0.395462] alg: No test for stdrng (krng)
[    0.395473] io scheduler noop registered
[    0.395476] io scheduler anticipatory registered
[    0.395478] io scheduler deadline registered
[    0.395507] io scheduler cfq registered (default)
[    0.502121] Switched to high resolution mode on CPU 1
[    0.504974] Switched to high resolution mode on CPU 0
[    0.536112] pci 0000:01:00.0: Boot video device
[    0.536258]   alloc irq_desc for 24 on node -1
[    0.536259]   alloc kstat_irqs on node -1
[    0.536265] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.536270] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.536343]   alloc irq_desc for 25 on node -1
[    0.536344]   alloc kstat_irqs on node -1
[    0.536349] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.536355] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.536440]   alloc irq_desc for 26 on node -1
[    0.536441]   alloc kstat_irqs on node -1
[    0.536446] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.536452] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.536537]   alloc irq_desc for 27 on node -1
[    0.536538]   alloc kstat_irqs on node -1
[    0.536543] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.536549] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.536613] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.536684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.536782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.536787] ACPI: Power Button [PWRF]
[    0.536830] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.536835] ACPI: Power Button [PWRB]
[    0.537152] ACPI Warning: Incorrect checksum in table [SSDT] - FE, should be 05 20090521 tbutils-246
[    0.537160] ACPI: SSDT bbfa8db0 002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.537368] processor LNXCPU:00: registered as cooling_device0
[    0.537477] ACPI: SSDT bbfa90a0 002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.537676] processor LNXCPU:01: registered as cooling_device1
[    0.538803] isapnp: Scanning for PnP cards...
[    0.891578] isapnp: No Plug & Play device found
[    0.892344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.892428] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.892676] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.893445] brd: module loaded
[    0.893744] loop: module loaded
[    0.893795] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.893847] ahci 0000:03:00.0: version 3.0
[    0.893857] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.908057] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.908065] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.908073] ahci 0000:03:00.0: setting latency timer to 64
[    0.908202] scsi0 : ahci
[    0.908268] scsi1 : ahci
[    0.908320] ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
[    0.908326] ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
[    0.908363] ata_piix 0000:00:1f.2: version 2.13
[    0.908370]   alloc irq_desc for 19 on node -1
[    0.908371]   alloc kstat_irqs on node -1
[    0.908375] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.908380] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.908412] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.908453] scsi2 : ata_piix
[    0.908496] scsi3 : ata_piix
[    0.909779] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[    0.909786] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[    0.909805] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.909810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.909837] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.909873] scsi4 : ata_piix
[    0.909927] scsi5 : ata_piix
[    0.910701] ata5: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
[    0.910707] ata6: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
[    0.910987] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.910993] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.911015] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    0.911064] scsi6 : pata_jmicron
[    0.911130] scsi7 : pata_jmicron
[    0.911617] ata7: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 17
[    0.911622] ata8: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 17
[    0.912018] Fixed MDIO Bus: probed
[    0.912043] PPP generic driver version 2.4.2
[    0.912101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.912113]   alloc irq_desc for 18 on node -1
[    0.912115]   alloc kstat_irqs on node -1
[    0.912118] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.912127] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.912129] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.912160] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.916054] ehci_hcd 0000:00:1a.7: debug port 1
[    0.916061] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.916080] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
[    0.928032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.928104] usb usb1: configuration #1 chosen from 1 choice
[    0.928136] hub 1-0:1.0: USB hub found
[    0.928145] hub 1-0:1.0: 4 ports detected
[    0.928196]   alloc irq_desc for 23 on node -1
[    0.928198]   alloc kstat_irqs on node -1
[    0.928203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.928214] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.928217] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.928248] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.932137] ehci_hcd 0000:00:1d.7: debug port 1
[    0.932143] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.932152] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[    0.948032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.948102] usb usb2: configuration #1 chosen from 1 choice
[    0.948131] hub 2-0:1.0: USB hub found
[    0.948139] hub 2-0:1.0: 6 ports detected
[    0.948194]   alloc irq_desc for 21 on node -1
[    0.948196]   alloc kstat_irqs on node -1
[    0.948201] ehci_hcd 0000:05:02.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.948212] ehci_hcd 0000:05:02.2: EHCI Host Controller
[    0.948247] ehci_hcd 0000:05:02.2: new USB bus registered, assigned bus number 3
[    0.972031] ehci_hcd 0000:05:02.2: irq 21, io mem 0xfeaffc00
[    0.984023] ehci_hcd 0000:05:02.2: USB 2.0 started, EHCI 1.00
[    0.984085] usb usb3: configuration #1 chosen from 1 choice
[    0.984114] hub 3-0:1.0: USB hub found
[    0.984122] hub 3-0:1.0: 5 ports detected
[    0.984189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.984219] ohci_hcd 0000:05:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.984228] ohci_hcd 0000:05:02.0: OHCI Host Controller
[    0.984249] ohci_hcd 0000:05:02.0: new USB bus registered, assigned bus number 4
[    0.984261] ohci_hcd 0000:05:02.0: irq 23, io mem 0xfeafd000
[    1.069838] usb usb4: configuration #1 chosen from 1 choice
[    1.069858] hub 4-0:1.0: USB hub found
[    1.069865] hub 4-0:1.0: 3 ports detected
[    1.069900]   alloc irq_desc for 20 on node -1
[    1.069901]   alloc kstat_irqs on node -1
[    1.069904] ohci_hcd 0000:05:02.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.069912] ohci_hcd 0000:05:02.1: OHCI Host Controller
[    1.069933] ohci_hcd 0000:05:02.1: new USB bus registered, assigned bus number 5
[    1.069949] ohci_hcd 0000:05:02.1: irq 20, io mem 0xfeafe000
[    1.092510] ata7.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[    1.092541] ata7.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
[    1.108534] ata7.00: configured for UDMA/33
[    1.154331] ata7.01: configured for UDMA/66
[    1.154451] usb usb5: configuration #1 chosen from 1 choice
[    1.154471] hub 5-0:1.0: USB hub found
[    1.154478] hub 5-0:1.0: 2 ports detected
[    1.154511] uhci_hcd: USB Universal Host Controller Interface driver
[    1.154528] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.154534] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.154536] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.154557] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 6
[    1.154578] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e880
[    1.154630] usb usb6: configuration #1 chosen from 1 choice
[    1.154651] hub 6-0:1.0: USB hub found
[    1.154656] hub 6-0:1.0: 2 ports detected
[    1.154688] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.154694] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.154697] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.154718] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 7
[    1.154738] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ec00
[    1.154788] usb usb7: configuration #1 chosen from 1 choice
[    1.154809] hub 7-0:1.0: USB hub found
[    1.154814] hub 7-0:1.0: 2 ports detected
[    1.154849] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.154856] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.154858] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.154885] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.154906] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[    1.154979] usb usb8: configuration #1 chosen from 1 choice
[    1.154998] hub 8-0:1.0: USB hub found
[    1.155003] hub 8-0:1.0: 2 ports detected
[    1.155034] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.155040] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.155042] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.155063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.155084] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[    1.155136] usb usb9: configuration #1 chosen from 1 choice
[    1.155155] hub 9-0:1.0: USB hub found
[    1.155160] hub 9-0:1.0: 2 ports detected
[    1.155192] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.155198] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.155200] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.155221] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.155242] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    1.155293] usb usb10: configuration #1 chosen from 1 choice
[    1.155312] hub 10-0:1.0: USB hub found
[    1.155318] hub 10-0:1.0: 2 ports detected
[    1.155389] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.157773] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.157779] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.157819] mice: PS/2 mouse device common for all mice
[    1.157889] rtc_cmos 00:03: RTC can wake from S4
[    1.157912] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.157933] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.158001] device-mapper: uevent: version 1.0.3
[    1.158133] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.158186] device-mapper: multipath: version 1.1.0 loaded
[    1.158189] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.158299] EISA: Probing bus 0 at eisa.0
[    1.158321] EISA: Detected 0 cards.
[    1.158379] cpuidle: using governor ladder
[    1.158382] cpuidle: using governor menu
[    1.158728] TCP cubic registered
[    1.158831] NET: Registered protocol family 10
[    1.159143] lo: Disabled Privacy Extensions
[    1.159371] NET: Registered protocol family 17
[    1.159384] Bluetooth: L2CAP ver 2.13
[    1.159386] Bluetooth: L2CAP socket layer initialized
[    1.159390] Bluetooth: SCO (Voice Link) ver 0.6
[    1.159392] Bluetooth: SCO socket layer initialized
[    1.159488] Bluetooth: RFCOMM TTY layer initialized
[    1.159493] Bluetooth: RFCOMM socket layer initialized
[    1.159495] Bluetooth: RFCOMM ver 1.11
[    1.159871] Using IPI No-Shortcut mode
[    1.159915] PM: Resume from disk failed.
[    1.159922] registered taskstats version 1
[    1.160028]   Magic number: 10:280:935
[    1.160073] rtc_cmos 00:03: setting system clock to 2010-01-02 12:55:08 UTC (1262436908)
[    1.160078] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.160080] EDD information not available.
[    1.176596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.234583] ata6: SATA link down (SStatus 0 SControl 300)
[    1.245090] ata5: SATA link down (SStatus 0 SControl 300)
[    1.245131] ata2: SATA link down (SStatus 0 SControl 300)
[    1.245159] ata1: SATA link down (SStatus 0 SControl 300)
[    1.280042] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.412380] usb 2-2: configuration #1 chosen from 1 choice
[    1.412478] hub 2-2:1.0: USB hub found
[    1.412578] hub 2-2:1.0: 2 ports detected
[    1.636022] usb 3-2: new high speed USB device using ehci_hcd and address 2
[    1.712068] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.712081] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.720262] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.720274] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.738844] ata3.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.738851] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.752471] ata3.00: configured for UDMA/133
[    1.752581] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.752693] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.752720] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.752753] sd 2:0:0:0: [sda] Write Protect is off
[    1.752757] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.752773] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.752859]  sda:
[    1.755905] ata4.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.755911] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.758869]  sda1 sda2 < sda5
[    1.772822] ata4.00: configured for UDMA/133
[    1.772875] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.772947] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.772971] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.773004] sd 3:0:0:0: [sdb] Write Protect is off
[    1.773007] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.773023] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.773099]  sdb: sda6 >
[    1.774570] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.774904] usb 3-2: configuration #1 chosen from 1 choice
[    1.775936]  sdb1 sdb2 sdb3
[    1.776152] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.776408] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    1.784149] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.784155] Uniform CD-ROM driver Revision: 3.20
[    1.784225] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.784270] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.785156] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
[    1.787900] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.787971] sr 6:0:1:0: Attached scsi CD-ROM sr1
[    1.788017] sr 6:0:1:0: Attached scsi generic sg3 type 5
[    1.955343] Freeing unused kernel memory: 540k freed
[    1.955539] Write protecting the kernel text: 4568k
[    1.955571] Write protecting the kernel read-only data: 1836k
[    2.030610] Linux agpgart interface v0.103
[    2.047990] sky2 driver version 1.23
[    2.048026] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.048037] sky2 0000:02:00.0: setting latency timer to 64
[    2.048055] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    2.048133]   alloc irq_desc for 28 on node -1
[    2.048134]   alloc kstat_irqs on node -1
[    2.048146] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    2.074461] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.074536] skge 1.13 addr 0xfeaf4000 irq 19 chip Yukon-Lite rev 9
[    2.092361] sky2 eth0: addr 00:1a:92:20:58:21
[    2.092956] skge eth1: addr 00:1a:92:20:50:4d
[    2.093750] Floppy drive(s): fd0 is 1.44M
[    2.095492] ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.112256] FDC 0 is a post-1991 82077
[    2.148064] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.248044] usb 5-2: new full speed USB device using ohci_hcd and address 2
[    2.484203] usb 5-2: configuration #1 chosen from 1 choice
[    2.728026] usb 9-2: new full speed USB device using uhci_hcd and address 2
[    2.789454] vesafb: framebuffer at 0xfb000000, mapped to 0xf8200000, using 5120k, total 14336k
[    2.789461] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[    2.789464] vesafb: protected mode interface info at c000:c140
[    2.789467] vesafb: pmi: set display start = c00cc1a3, set palette = c00cc1fe
[    2.789470] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    2.789486] vesafb: scrolling: redraw
[    2.789489] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.789518] fb0: VESA VGA frame buffer device
[    2.792680] Console: switching to colour frame buffer device 160x64
[    2.926180] usb 9-2: configuration #1 chosen from 1 choice
[    2.951021] xor: automatically using best checksumming function: pIII_sse
[    2.967993]    pIII_sse  : 10639.000 MB/sec
[    2.967995] xor: using function: pIII_sse (10639.000 MB/sec)
[    2.969508] device-mapper: dm-raid45: initialized v0.2594b
[    2.976976] md: linear personality registered for level -1
[    2.978545] md: multipath personality registered for level -4
[    2.979949] md: raid0 personality registered for level 0
[    2.982102] md: raid1 personality registered for level 1
[    2.983555] async_tx: api initialized (async)
[    3.052014] raid6: int32x1   1164 MB/s
[    3.120003] raid6: int32x2   1049 MB/s
[    3.187999] raid6: int32x4    893 MB/s
[    3.232006] usb 4-2: new low speed USB device using ohci_hcd and address 2
[    3.256001] raid6: int32x8    730 MB/s
[    3.324002] raid6: mmxx1     3800 MB/s
[    3.391995] raid6: mmxx2     4398 MB/s
[    3.420073] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000113f3b9]
[    3.460003] raid6: sse1x1    2632 MB/s
[    3.528002] raid6: sse1x2    3415 MB/s
[    3.595995] raid6: sse2x1    4910 MB/s
[    3.664002] raid6: sse2x2    6246 MB/s
[    3.664002] raid6: using algorithm sse2x2 (6246 MB/s)
[    3.665887] md: raid6 personality registered for level 6
[    3.665889] md: raid5 personality registered for level 5
[    3.665890] md: raid4 personality registered for level 4
[    3.670372] md: raid10 personality registered for level 10
[    4.049611] PM: Starting manual resume from disk
[    4.049614] PM: Resume from partition 8:5
[    4.049616] PM: Checking hibernation image.
[    4.049811] PM: Resume from disk failed.
[    4.099613] kjournald starting.  Commit interval 5 seconds
[    4.099623] EXT3-fs: mounted filesystem with writeback data mode.
[    4.656286] type=1505 audit(1262436911.995:2): operation="profile_load" pid=512 name=/usr/share/gdm/guest-session/Xsession
[    4.670320] type=1505 audit(1262436912.007:3): operation="profile_load" pid=513 name=/sbin/dhclient3
[    4.670893] type=1505 audit(1262436912.007:4): operation="profile_load" pid=513 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.671158] type=1505 audit(1262436912.007:5): operation="profile_load" pid=513 name=/usr/lib/connman/scripts/dhclient-script
[    4.695822] type=1505 audit(1262436912.031:6): operation="profile_load" pid=514 name=/usr/bin/evince
[    4.703632] type=1505 audit(1262436912.039:7): operation="profile_load" pid=514 name=/usr/bin/evince-previewer
[    4.708254] type=1505 audit(1262436912.047:8): operation="profile_load" pid=514 name=/usr/bin/evince-thumbnailer
[    4.721241] type=1505 audit(1262436912.060:9): operation="profile_load" pid=516 name=/usr/lib/cups/backend/cups-pdf
[    4.721851] type=1505 audit(1262436912.060:10): operation="profile_load" pid=516 name=/usr/sbin/cupsd
[    5.007344] usb 4-2: configuration #1 chosen from 1 choice
[   21.878393] udev: starting version 147
[   21.879043] Adding 3903752k swap on /dev/sda5.  Priority:-1 extents:1 across:3903752k 
[   21.961432] nvidia: module license 'NVIDIA' taints kernel.
[   21.961435] Disabling lock debugging due to kernel taint
[   22.009626] Linux video capture interface: v2.00
[   22.010920] gspca: main v2.6.0 registered
[   22.011536] gspca: probing 046d:08da
[   22.064577] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[   22.064592] usbcore: registered new interface driver usblp
[   22.067442]   alloc irq_desc for 22 on node -1
[   22.067444]   alloc kstat_irqs on node -1
[   22.067449] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   22.067469] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   22.175980] psmouse serio1: ID: 10 00 64
[   22.235487] lp: driver loaded but no devices found
[   22.253974] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.256788] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   22.256793] nvidia 0000:01:00.0: setting latency timer to 64
[   22.256876] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   22.319175] usbcore: registered new interface driver hiddev
[   22.481749] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[   22.540319] EXT3 FS on sda1, internal journal
[   22.822767] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   23.460112] kjournald starting.  Commit interval 5 seconds
[   23.460496] EXT3 FS on sda6, internal journal
[   23.460500] EXT3-fs: mounted filesystem with writeback data mode.
[   23.943270] zc3xx: probe 2wr ov vga 0x0000
[   23.987269] zc3xx: probe sensor -> 0011
[   23.987272] zc3xx: Find Sensor HV7131R(c)
[   23.991321] gspca: probe ok
[   23.991384] gspca: probing 046d:08da
[   23.991401] gspca: probing 046d:08da
[   23.991425] usbcore: registered new interface driver zc3xx
[   23.991428] zc3xx: registered
[   23.992319] STV06xx: Probing for a stv06xx device
[   23.992321] gspca: probing 046d:08da
[   23.992326] STV06xx: Probing for a stv06xx device
[   23.992327] gspca: probing 046d:08da
[   23.992341] usbcore: registered new interface driver STV06xx
[   23.992343] STV06xx: registered
[   24.071536] usbcore: registered new interface driver snd-usb-audio
[   26.871070] sky2 eth0: enabling interface
[   26.871195] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.888688] skge eth1: enabling interface
[   26.891796] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.896581] __ratelimit: 9 callbacks suppressed
[   26.896583] type=1505 audit(1262433334.235:14): operation="profile_replace" pid=1293 name=/usr/share/gdm/guest-session/Xsession
[   26.898997] type=1505 audit(1262433334.235:15): operation="profile_replace" pid=1294 name=/sbin/dhclient3
[   26.899486] type=1505 audit(1262433334.235:16): operation="profile_replace" pid=1294 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   26.899752] type=1505 audit(1262433334.235:17): operation="profile_replace" pid=1294 name=/usr/lib/connman/scripts/dhclient-script
[   26.913020] type=1505 audit(1262433334.251:18): operation="profile_replace" pid=1295 name=/usr/bin/evince
[   26.920855] type=1505 audit(1262433334.259:19): operation="profile_replace" pid=1295 name=/usr/bin/evince-previewer
[   26.925963] type=1505 audit(1262433334.263:20): operation="profile_replace" pid=1295 name=/usr/bin/evince-thumbnailer
[   26.932250] type=1505 audit(1262433334.271:21): operation="profile_replace" pid=1297 name=/usr/lib/cups/backend/cups-pdf
[   26.932819] type=1505 audit(1262433334.271:22): operation="profile_replace" pid=1297 name=/usr/sbin/cupsd
[   26.934431] type=1505 audit(1262433334.271:23): operation="profile_replace" pid=1298 name=/usr/sbin/mysqld-akonadi
[   27.722889] generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.00 Device [MGE ELLIPSE] on usb-0000:05:02.0-2/input0
[   27.722904] usbcore: registered new interface driver usbhid
[   27.722906] usbhid: v2.6:USB HID core driver
[   28.293470] ppdev: user-space parallel port driver
[   28.703350] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   28.703562] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.720480] CPU0 attaching NULL sched-domain.
[   28.720484] CPU1 attaching NULL sched-domain.
[   28.749638] CPU0 attaching sched-domain:
[   28.749641]  domain 0: span 0-1 level MC
[   28.749643]   groups: 0 1
[   28.749646]   domain 1: span 0-1 level CPU
[   28.749648]    groups: 0-1 (__cpu_power = 2048)
[   28.749652] CPU1 attaching sched-domain:
[   28.749653]  domain 0: span 0-1 level MC
[   28.749655]   groups: 1 0
[   28.749658]   domain 1: span 0-1 level CPU
[   28.749659]    groups: 0-1 (__cpu_power = 2048)
[   29.299044] CPU0 attaching NULL sched-domain.
[   29.299048] CPU1 attaching NULL sched-domain.
[   29.312585] CPU0 attaching sched-domain:
[   29.312588]  domain 0: span 0-1 level MC
[   29.312591]   groups: 0 1
[   29.312596] CPU1 attaching sched-domain:
[   29.312598]  domain 0: span 0-1 level MC
[   29.312601]   groups: 1 0
[   29.699463] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[   39.404006] eth0: no IPv6 routers present
marc@ubuntu:~$

Malizor · Le 02/01/2010, à 13:26

Je t'explique, en fait les nombres dans la colonne de gauche du dmesg correspondent au temps, dans le cas d'un boot très/trop long ça permet de voir où ça bloque.
Par exemple tu peux voir que tu as un trou entre la 5ème et la 21ème seconde et que c'est dû au démarrage de udev (mais à priori, ça, ce n'est pas forcément aberrent).

Tout ça pour dire que si le boot c'est bien déroulé on ne peut pas déduire grand chose.
Donc profite du fait que ça marche et si le problème se représente n'hésite pas à reposter ton dmesg

Ansuz · Le 02/01/2010, à 13:42

Merci pour ta patience et ton aide en tout cas.

Ansuz · Le 03/01/2010, à 11:25

Malheureusement, le problème n'est toujours pas réglé...
Démarrage "à froid" ce matin, et ça recommence !
Voici ce que me donne un "dmesg" juste après le démarrage:

[    1.154656] hub 6-0:1.0: 2 ports detected
[    1.154688] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.154694] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.154696] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.154717] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 7
[    1.154737] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ec00
[    1.154788] usb usb7: configuration #1 chosen from 1 choice
[    1.154809] hub 7-0:1.0: USB hub found
[    1.154814] hub 7-0:1.0: 2 ports detected
[    1.154849] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.154855] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.154878] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.154906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.154927] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[    1.154978] usb usb8: configuration #1 chosen from 1 choice
[    1.154998] hub 8-0:1.0: USB hub found
[    1.155003] hub 8-0:1.0: 2 ports detected
[    1.155034] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.155040] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.155042] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.155063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.155083] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[    1.155135] usb usb9: configuration #1 chosen from 1 choice
[    1.155154] hub 9-0:1.0: USB hub found
[    1.155160] hub 9-0:1.0: 2 ports detected
[    1.155191] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.155198] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.155200] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.155221] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.155241] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    1.155292] usb usb10: configuration #1 chosen from 1 choice
[    1.155311] hub 10-0:1.0: USB hub found
[    1.155317] hub 10-0:1.0: 2 ports detected
[    1.155388] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.157970] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.157976] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.158018] mice: PS/2 mouse device common for all mice
[    1.158088] rtc_cmos 00:03: RTC can wake from S4
[    1.158112] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.158133] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.158201] device-mapper: uevent: version 1.0.3
[    1.158332] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.158385] device-mapper: multipath: version 1.1.0 loaded
[    1.158389] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.158498] EISA: Probing bus 0 at eisa.0
[    1.158521] EISA: Detected 0 cards.
[    1.158578] cpuidle: using governor ladder
[    1.158581] cpuidle: using governor menu
[    1.158926] TCP cubic registered
[    1.159029] NET: Registered protocol family 10
[    1.159341] lo: Disabled Privacy Extensions
[    1.159570] NET: Registered protocol family 17
[    1.159582] Bluetooth: L2CAP ver 2.13
[    1.159584] Bluetooth: L2CAP socket layer initialized
[    1.159588] Bluetooth: SCO (Voice Link) ver 0.6
[    1.159590] Bluetooth: SCO socket layer initialized
[    1.159686] Bluetooth: RFCOMM TTY layer initialized
[    1.159691] Bluetooth: RFCOMM socket layer initialized
[    1.159693] Bluetooth: RFCOMM ver 1.11
[    1.160078] Using IPI No-Shortcut mode
[    1.160121] PM: Resume from disk failed.
[    1.160129] registered taskstats version 1
[    1.160226]   Magic number: 10:178:476
[    1.160272] rtc_cmos 00:03: setting system clock to 2010-01-03 10:28:04 UTC (1262514484)
[    1.160276] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.160279] EDD information not available.
[    1.176691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.234581] ata6: SATA link down (SStatus 0 SControl 300)
[    1.245085] ata5: SATA link down (SStatus 0 SControl 300)
[    1.245126] ata1: SATA link down (SStatus 0 SControl 300)
[    1.245153] ata2: SATA link down (SStatus 0 SControl 300)
[    1.280044] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.412447] usb 2-2: configuration #1 chosen from 1 choice
[    1.412545] hub 2-2:1.0: USB hub found
[    1.412646] hub 2-2:1.0: 2 ports detected
[    1.636027] usb 3-2: new high speed USB device using ehci_hcd and address 2
[    1.712069] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.712082] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.720264] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.720274] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.727564] ata3.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.727571] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.737394] ata4.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.737399] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.740578] ata3.00: configured for UDMA/133
[    1.740683] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.740798] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.740825] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.740859] sd 2:0:0:0: [sda] Write Protect is off
[    1.740862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.740878] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.740964]  sda: sda1 sda2 <
[    1.749316] ata4.00: configured for UDMA/133
[    1.749394] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.749465] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.749488] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.749520] sd 3:0:0:0: [sdb] Write Protect is off
[    1.749524] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.749539] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.749615]  sdb:
[    1.752976] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    1.756811]  sda5 sdb1 sdb2 sdb3
[    1.757743] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.760660] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.760665] Uniform CD-ROM driver Revision: 3.20
[    1.760735] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.760775] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.761654] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
[    1.763051]  sda6 >
[    1.763291] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.764486] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.764556] sr 6:0:1:0: Attached scsi CD-ROM sr1
[    1.764596] sr 6:0:1:0: Attached scsi generic sg3 type 5
[    1.774974] usb 3-2: configuration #1 chosen from 1 choice
[    1.931356] Freeing unused kernel memory: 540k freed
[    1.931552] Write protecting the kernel text: 4568k
[    1.931584] Write protecting the kernel read-only data: 1836k
[    2.005264] Linux agpgart interface v0.103
[    2.045062] sky2 driver version 1.23
[    2.045096] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.045107] sky2 0000:02:00.0: setting latency timer to 64
[    2.045125] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    2.045201]   alloc irq_desc for 28 on node -1
[    2.045203]   alloc kstat_irqs on node -1
[    2.045214] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    2.045673] sky2 eth0: addr 00:1a:92:20:58:21
[    2.051769] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.051805] skge 1.13 addr 0xfeaf4000 irq 19 chip Yukon-Lite rev 9
[    2.052302] skge eth1: addr 00:1a:92:20:50:4d
[    2.077857] Floppy drive(s): fd0 is 1.44M
[    2.080415] ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.096280] FDC 0 is a post-1991 82077
[    2.136594] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.244043] usb 5-2: new full speed USB device using ohci_hcd and address 2
[    2.473324] usb 5-2: configuration #1 chosen from 1 choice
[    2.716061] usb 9-2: new full speed USB device using uhci_hcd and address 2
[    2.780353] vesafb: framebuffer at 0xfb000000, mapped to 0xf8200000, using 5120k, total 14336k
[    2.780359] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[    2.780362] vesafb: protected mode interface info at c000:c140
[    2.780365] vesafb: pmi: set display start = c00cc1a3, set palette = c00cc1fe
[    2.780368] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    2.780384] vesafb: scrolling: redraw
[    2.780387] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.780415] fb0: VESA VGA frame buffer device
[    2.784052] Console: switching to colour frame buffer device 160x64
[    2.903354] usb 9-2: configuration #1 chosen from 1 choice
[    3.021109] xor: automatically using best checksumming function: pIII_sse
[    3.040501]    pIII_sse  : 10638.000 MB/sec
[    3.040503] xor: using function: pIII_sse (10638.000 MB/sec)
[    3.042007] device-mapper: dm-raid45: initialized v0.2594b
[    3.049464] md: linear personality registered for level -1
[    3.051003] md: multipath personality registered for level -4
[    3.052401] md: raid0 personality registered for level 0
[    3.054534] md: raid1 personality registered for level 1
[    3.056048] async_tx: api initialized (async)
[    3.124505] raid6: int32x1   1164 MB/s
[    3.192508] raid6: int32x2   1048 MB/s
[    3.260555] raid6: int32x4    882 MB/s
[    3.328573] raid6: int32x8    731 MB/s
[    3.396510] raid6: mmxx1     3798 MB/s
[    3.416507] usb 4-2: new low speed USB device using ohci_hcd and address 2
[    3.464503] raid6: mmxx2     4394 MB/s
[    3.532505] raid6: sse1x1    2632 MB/s
[    3.600502] raid6: sse1x2    3329 MB/s
[    3.640576] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000113f3b9]
[    3.668502] raid6: sse2x1    4963 MB/s
[    3.736505] raid6: sse2x2    5417 MB/s
[    3.736506] raid6: using algorithm sse2x2 (5417 MB/s)
[    3.738389] md: raid6 personality registered for level 6
[    3.738391] md: raid5 personality registered for level 5
[    3.738392] md: raid4 personality registered for level 4
[    3.742904] md: raid10 personality registered for level 10
[    4.022561] PM: Starting manual resume from disk
[    4.022564] PM: Resume from partition 8:5
[    4.022565] PM: Checking hibernation image.
[    4.022743] PM: Resume from disk failed.
[    4.096848] kjournald starting.  Commit interval 5 seconds
[    4.096854] EXT3-fs: mounted filesystem with writeback data mode.
[    4.686912] type=1505 audit(1262514488.023:2): operation="profile_load" pid=544 name=/usr/share/gdm/guest-session/Xsession
[    4.700988] type=1505 audit(1262514488.039:3): operation="profile_load" pid=545 name=/sbin/dhclient3
[    4.701537] type=1505 audit(1262514488.039:4): operation="profile_load" pid=545 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.701801] type=1505 audit(1262514488.039:5): operation="profile_load" pid=545 name=/usr/lib/connman/scripts/dhclient-script
[    4.726453] type=1505 audit(1262514488.063:6): operation="profile_load" pid=546 name=/usr/bin/evince
[    4.734268] type=1505 audit(1262514488.071:7): operation="profile_load" pid=546 name=/usr/bin/evince-previewer
[    4.738875] type=1505 audit(1262514488.075:8): operation="profile_load" pid=546 name=/usr/bin/evince-thumbnailer
[    4.751945] type=1505 audit(1262514488.087:9): operation="profile_load" pid=548 name=/usr/lib/cups/backend/cups-pdf
[    4.752599] type=1505 audit(1262514488.091:10): operation="profile_load" pid=548 name=/usr/sbin/cupsd
[   22.415039] udev: starting version 147
[   22.433715] Adding 3903752k swap on /dev/sda5.  Priority:-1 extents:1 across:3903752k 
[   22.496930] nvidia: module license 'NVIDIA' taints kernel.
[   22.496933] Disabling lock debugging due to kernel taint
[   22.591589] Linux video capture interface: v2.00
[   22.592902] gspca: main v2.6.0 registered
[   22.593522] gspca: probing 046d:08da
[   22.626607]   alloc irq_desc for 22 on node -1
[   22.626609]   alloc kstat_irqs on node -1
[   22.626614] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   22.626635] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   22.627262] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[   22.627275] usbcore: registered new interface driver usblp
[   22.783604] lp: driver loaded but no devices found
[   22.793560] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   22.793565] nvidia 0000:01:00.0: setting latency timer to 64
[   22.793653] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   22.807613] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.914539] psmouse serio1: ID: 10 00 64
[   22.936276] EXT3 FS on sda1, internal journal
[   23.041056] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[   23.546413] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   23.883939] kjournald starting.  Commit interval 5 seconds
[   23.884392] EXT3 FS on sda6, internal journal
[   23.884397] EXT3-fs: mounted filesystem with writeback data mode.
[   24.355615] zc3xx: probe 2wr ov vga 0x0000
[   24.399411] zc3xx: probe sensor -> 0011
[   24.399414] zc3xx: Find Sensor HV7131R(c)
[   24.403461] gspca: probe ok
[   24.403471] gspca: probing 046d:08da
[   24.403480] gspca: probing 046d:08da
[   24.403497] usbcore: registered new interface driver zc3xx
[   24.403500] zc3xx: registered
[   24.404657] STV06xx: Probing for a stv06xx device
[   24.404659] gspca: probing 046d:08da
[   24.404663] STV06xx: Probing for a stv06xx device
[   24.404665] gspca: probing 046d:08da
[   24.404678] usbcore: registered new interface driver STV06xx
[   24.404680] STV06xx: registered
[   24.522690] usbcore: registered new interface driver snd-usb-audio
[   26.275938] __ratelimit: 9 callbacks suppressed
[   26.275940] type=1505 audit(1262510909.611:14): operation="profile_replace" pid=1360 name=/usr/share/gdm/guest-session/Xsession
[   26.277091] type=1505 audit(1262510909.615:15): operation="profile_replace" pid=1361 name=/sbin/dhclient3
[   26.277580] type=1505 audit(1262510909.615:16): operation="profile_replace" pid=1361 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   26.277844] type=1505 audit(1262510909.615:17): operation="profile_replace" pid=1361 name=/usr/lib/connman/scripts/dhclient-script
[   26.280234] type=1505 audit(1262510909.619:18): operation="profile_replace" pid=1362 name=/usr/bin/evince
[   26.288110] type=1505 audit(1262510909.627:19): operation="profile_replace" pid=1362 name=/usr/bin/evince-previewer
[   26.293217] type=1505 audit(1262510909.631:20): operation="profile_replace" pid=1362 name=/usr/bin/evince-thumbnailer
[   26.296480] sky2 eth0: enabling interface
[   26.296767] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.297922] skge eth1: enabling interface
[   26.299854] type=1505 audit(1262510909.635:21): operation="profile_replace" pid=1364 name=/usr/lib/cups/backend/cups-pdf
[   26.300424] type=1505 audit(1262510909.639:22): operation="profile_replace" pid=1364 name=/usr/sbin/cupsd
[   26.301040] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   26.302452] type=1505 audit(1262510909.639:23): operation="profile_replace" pid=1365 name=/usr/sbin/mysqld-akonadi
[   27.980097] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   28.057596] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.391797] ppdev: user-space parallel port driver
[   29.777819] CPU0 attaching NULL sched-domain.
[   29.777823] CPU1 attaching NULL sched-domain.
[   29.788562] CPU0 attaching sched-domain:
[   29.788565]  domain 0: span 0-1 level MC
[   29.788567]   groups: 0 1
[   29.788570]   domain 1: span 0-1 level CPU
[   29.788572]    groups: 0-1 (__cpu_power = 2048)
[   29.788576] CPU1 attaching sched-domain:
[   29.788577]  domain 0: span 0-1 level MC
[   29.788579]   groups: 1 0
[   29.788581]   domain 1: span 0-1 level CPU
[   29.788583]    groups: 0-1 (__cpu_power = 2048)
[   38.676015] eth0: no IPv6 routers present
[  240.392018] INFO: task khubd:26 blocked for more than 120 seconds.
[  240.392022] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392024] khubd         D c08145c0     0    26      2 0x00000000
[  240.392029]  f713bdd4 00000046 00000000 c08145c0 f70bcdf8 c08145c0 8fe49cbe 00000002
[  240.392036]  c08145c0 c08145c0 f70bcdf8 c08145c0 8fe490be 00000002 c08145c0 f666a380
[  240.392043]  f70bcb60 f6a4fb80 f713bddc f713be08 f713bdf8 c0411125 00000000 f70bcb60
[  240.392049] Call Trace:
[  240.392057]  [<c0411125>] usb_kill_urb+0x65/0xa0
[  240.392062]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  240.392065]  [<c0412624>] usb_start_wait_urb+0xa4/0xb0
[  240.392069]  [<c0412920>] usb_control_msg+0xc0/0x120
[  240.392072]  [<c040c159>] hub_port_init+0x569/0x7b0
[  240.392076]  [<c040cd7a>] hub_port_connect_change+0x19a/0x830
[  240.392079]  [<c0412930>] ? usb_control_msg+0xd0/0x120
[  240.392083]  [<c040e4c5>] hub_events+0x1f5/0x500
[  240.392086]  [<c056efdc>] ? schedule+0x40c/0x730
[  240.392090]  [<c0138097>] ? finish_task_switch+0x57/0xe0
[  240.392094]  [<c015c3da>] ? finish_wait+0x4a/0x70
[  240.392097]  [<c040e7d0>] ? hub_thread+0x0/0x150
[  240.392099]  [<c040e805>] hub_thread+0x35/0x150
[  240.392103]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  240.392106]  [<c015bf8c>] kthread+0x7c/0x90
[  240.392109]  [<c015bf10>] ? kthread+0x0/0x90
[  240.392112]  [<c0104007>] kernel_thread_helper+0x7/0x10
[  240.392118] INFO: task udev-configure-:899 blocked for more than 120 seconds.
[  240.392120] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392122] udev-configur D c08145c0     0   899      1 0x00000000
[  240.392126]  f0f6fd58 00000082 f0f6c000 c08145c0 f0f5cdf8 c08145c0 42f1d728 00000005
[  240.392132]  c08145c0 c08145c0 f0f5cdf8 c08145c0 00000001 00000005 c08145c0 f0f0a380
[  240.392139]  f0f5cb60 7fffffff f6939498 f0f5cb60 f0f6fdb4 c056f735 c01f0b20 00000000
[  240.392145] Call Trace:
[  240.392149]  [<c056f735>] schedule_timeout+0x185/0x200
[  240.392153]  [<c01f0b20>] ? path_put+0x20/0x30
[  240.392156]  [<c01b793d>] ? prep_new_page+0xad/0x120
[  240.392160]  [<c01fdd7a>] ? mntput_no_expire+0x1a/0xd0
[  240.392163]  [<c0570447>] __down+0x57/0x90
[  240.392166]  [<c01fdd7a>] ? mntput_no_expire+0x1a/0xd0
[  240.392170]  [<c0160dd4>] down+0x34/0x40
[  240.392173]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  240.392176]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  240.392180]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  240.392183]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  240.392186]  [<c0418be0>] ? match_devt+0x0/0x20
[  240.392189]  [<c01ea80a>] ? exact_lock+0xa/0x20
[  240.392193]  [<c03a4d66>] ? kobj_lookup+0x106/0x150
[  240.392196]  [<c01ea6d0>] ? exact_match+0x0/0x10
[  240.392200]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  240.392203]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  240.392206]  [<c01b3c4d>] ? find_get_page+0x1d/0x90
[  240.392209]  [<c01b4888>] ? filemap_fault+0xa8/0x340
[  240.392213]  [<c01f39ea>] ? do_filp_open+0x53a/0x890
[  240.392216]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  240.392219]  [<c01b2ea1>] ? unlock_page+0x41/0x50
[  240.392222]  [<c01cadb8>] ? __do_fault+0x388/0x470
[  240.392226]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  240.392229]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  240.392233]  [<c05733ab>] ? do_page_fault+0x19b/0x380
[  240.392236]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  240.392239]  [<c010336c>] syscall_call+0x7/0xb
[  240.392252] INFO: task devkit-power-da:1922 blocked for more than 120 seconds.
[  240.392254] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392256] devkit-power- D c08145c0     0  1922      1 0x00000000
[  240.392260]  f1531d58 00000082 f0c24000 c08145c0 f17d5a88 c08145c0 f8965043 00000006
[  240.392267]  c08145c0 c08145c0 f17d5a88 c08145c0 00000000 00000006 c08145c0 f69db180
[  240.392273]  f17d57f0 7fffffff f6939498 f17d57f0 f1531db4 c056f735 f6a5d898 f1531d7c
[  240.392280] Call Trace:
[  240.392290]  [<c056f735>] schedule_timeout+0x185/0x200
[  240.392294]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  240.392297]  [<c012d26b>] ? kunmap_atomic+0x5b/0x70
[  240.392300]  [<c01b793d>] ? prep_new_page+0xad/0x120
[  240.392303]  [<c0570447>] __down+0x57/0x90
[  240.392306]  [<c0160dd4>] down+0x34/0x40
[  240.392309]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  240.392313]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  240.392316]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  240.392319]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  240.392322]  [<c0418be0>] ? match_devt+0x0/0x20
[  240.392325]  [<c01f234c>] ? __link_path_walk+0x9bc/0xb90
[  240.392329]  [<c01f9a4e>] ? d_alloc+0x1e/0x190
[  240.392332]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  240.392336]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  240.392339]  [<c01e5c95>] ? nameidata_to_filp+0x55/0x70
[  240.392342]  [<c01ea990>] ? chrdev_open+0x0/0x190
[  240.392346]  [<c01f39ea>] ? do_filp_open+0x53a/0x890
[  240.392350]  [<c01e31bf>] ? __mem_cgroup_commit_charge+0x3f/0x80
[  240.392353]  [<c01ca1a9>] ? do_anonymous_page+0x199/0x200
[  240.392357]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  240.392360]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  240.392363]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  240.392366]  [<c01e5939>] ? sys_open+0x29/0x40
[  240.392369]  [<c010336c>] syscall_call+0x7/0xb
[  360.392510] INFO: task khubd:26 blocked for more than 120 seconds.
[  360.392514] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392517] khubd         D c08145c0     0    26      2 0x00000000
[  360.392521]  f713bdd4 00000046 00000000 c08145c0 f70bcdf8 c08145c0 8fe49cbe 00000002
[  360.392529]  c08145c0 c08145c0 f70bcdf8 c08145c0 8fe490be 00000002 c08145c0 f666a380
[  360.392535]  f70bcb60 f6a4fb80 f713bddc f713be08 f713bdf8 c0411125 00000000 f70bcb60
[  360.392542] Call Trace:
[  360.392550]  [<c0411125>] usb_kill_urb+0x65/0xa0
[  360.392555]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  360.392558]  [<c0412624>] usb_start_wait_urb+0xa4/0xb0
[  360.392562]  [<c0412920>] usb_control_msg+0xc0/0x120
[  360.392565]  [<c040c159>] hub_port_init+0x569/0x7b0
[  360.392569]  [<c040cd7a>] hub_port_connect_change+0x19a/0x830
[  360.392573]  [<c0412930>] ? usb_control_msg+0xd0/0x120
[  360.392576]  [<c040e4c5>] hub_events+0x1f5/0x500
[  360.392579]  [<c056efdc>] ? schedule+0x40c/0x730
[  360.392583]  [<c0138097>] ? finish_task_switch+0x57/0xe0
[  360.392586]  [<c015c3da>] ? finish_wait+0x4a/0x70
[  360.392589]  [<c040e7d0>] ? hub_thread+0x0/0x150
[  360.392592]  [<c040e805>] hub_thread+0x35/0x150
[  360.392596]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  360.392599]  [<c015bf8c>] kthread+0x7c/0x90
[  360.392602]  [<c015bf10>] ? kthread+0x0/0x90
[  360.392605]  [<c0104007>] kernel_thread_helper+0x7/0x10
[  360.392611] INFO: task udev-configure-:899 blocked for more than 120 seconds.
[  360.392613] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392615] udev-configur D c08145c0     0   899      1 0x00000000
[  360.392619]  f0f6fd58 00000082 f0f6c000 c08145c0 f0f5cdf8 c08145c0 42f1d728 00000005
[  360.392626]  c08145c0 c08145c0 f0f5cdf8 c08145c0 00000001 00000005 c08145c0 f0f0a380
[  360.392632]  f0f5cb60 7fffffff f6939498 f0f5cb60 f0f6fdb4 c056f735 c01f0b20 00000000
[  360.392639] Call Trace:
[  360.392642]  [<c056f735>] schedule_timeout+0x185/0x200
[  360.392646]  [<c01f0b20>] ? path_put+0x20/0x30
[  360.392650]  [<c01b793d>] ? prep_new_page+0xad/0x120
[  360.392654]  [<c01fdd7a>] ? mntput_no_expire+0x1a/0xd0
[  360.392657]  [<c0570447>] __down+0x57/0x90
[  360.392660]  [<c01fdd7a>] ? mntput_no_expire+0x1a/0xd0
[  360.392663]  [<c0160dd4>] down+0x34/0x40
[  360.392667]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  360.392670]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  360.392673]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  360.392676]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  360.392679]  [<c0418be0>] ? match_devt+0x0/0x20
[  360.392683]  [<c01ea80a>] ? exact_lock+0xa/0x20
[  360.392687]  [<c03a4d66>] ? kobj_lookup+0x106/0x150
[  360.392690]  [<c01ea6d0>] ? exact_match+0x0/0x10
[  360.392694]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  360.392697]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  360.392700]  [<c01b3c4d>] ? find_get_page+0x1d/0x90
[  360.392703]  [<c01b4888>] ? filemap_fault+0xa8/0x340
[  360.392707]  [<c01f39ea>] ? do_filp_open+0x53a/0x890
[  360.392710]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  360.392713]  [<c01b2ea1>] ? unlock_page+0x41/0x50
[  360.392716]  [<c01cadb8>] ? __do_fault+0x388/0x470
[  360.392720]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  360.392724]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  360.392727]  [<c05733ab>] ? do_page_fault+0x19b/0x380
[  360.392730]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  360.392734]  [<c010336c>] syscall_call+0x7/0xb
[  360.392750] INFO: task devkit-power-da:1922 blocked for more than 120 seconds.
[  360.392752] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392754] devkit-power- D c08145c0     0  1922      1 0x00000000
[  360.392758]  f1531d58 00000082 f0c24000 c08145c0 f17d5a88 c08145c0 f8965043 00000006
[  360.392765]  c08145c0 c08145c0 f17d5a88 c08145c0 00000000 00000006 c08145c0 f69db180
[  360.392772]  f17d57f0 7fffffff f6939498 f17d57f0 f1531db4 c056f735 f6a5d898 f1531d7c
[  360.392778] Call Trace:
[  360.392790]  [<c056f735>] schedule_timeout+0x185/0x200
[  360.392793]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  360.392796]  [<c012d26b>] ? kunmap_atomic+0x5b/0x70
[  360.392800]  [<c01b793d>] ? prep_new_page+0xad/0x120
[  360.392803]  [<c0570447>] __down+0x57/0x90
[  360.392806]  [<c0160dd4>] down+0x34/0x40
[  360.392809]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  360.392813]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  360.392816]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  360.392819]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  360.392822]  [<c0418be0>] ? match_devt+0x0/0x20
[  360.392825]  [<c01f234c>] ? __link_path_walk+0x9bc/0xb90
[  360.392828]  [<c01f9a4e>] ? d_alloc+0x1e/0x190
[  360.392832]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  360.392835]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  360.392838]  [<c01e5c95>] ? nameidata_to_filp+0x55/0x70
[  360.392842]  [<c01ea990>] ? chrdev_open+0x0/0x190
[  360.392845]  [<c01f39ea>] ? do_filp_open+0x53a/0x890
[  360.392849]  [<c01e31bf>] ? __mem_cgroup_commit_charge+0x3f/0x80
[  360.392852]  [<c01ca1a9>] ? do_anonymous_page+0x199/0x200
[  360.392856]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  360.392859]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  360.392862]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  360.392865]  [<c01e5939>] ? sys_open+0x29/0x40
[  360.392868]  [<c010336c>] syscall_call+0x7/0xb
marc@ubuntu:~$

-Première constatation: le boot sans encombre met 39 secondes contre 6 minutes lorsque le souci se produit.
Donc 9,23 plus de temps lors du démarrage !!!

Puis, "un arrêt" se produit à 39s pour repartir à 240s:(que se passe-t-il durant ces 3.35 minutes ?)

[ 38.676015] eth0: no IPv6 routers present
[ 240.392018] INFO: task khubd:26 blocked for more than 120 seconds.

[ 240.392118] INFO: task udev-configure-:899 blocked for more than 120 seconds.
[ 240.392120] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

[ 240.392369] [<c010336c>] syscall_call+0x7/0xb
[ 360.392510] INFO: task khubd:26 blocked for more than 120 seconds. (Ici on a bien 120s entre les deux lignes)

[ 360.392750] INFO: task devkit-power-da:1922 blocked for more than 120 seconds.
[ 360.392752] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

Est-ce que cela parle à quelqu'un ?

Malizor · Le 03/01/2010, à 11:45

Visiblement c'est khubd qui met le bazar, or d'après ce que j'ai compris celui-ci s'occupe des périphériques USB.

Il serait intéressent que tu débranches ce que tu peux (disque dur externe, clef usb, autres...) pour voir si ça peux pas venir d'un périphérique en particulier.

Ansuz · Le 03/01/2010, à 12:27

Oui, c'est ce que j'ai constaté concernant khubd en fouinant sur google, ça concerne l'usb.
Or, les seuls périphériques que j'ai changé dernièrement, sont ma souris, (usb) et celle-ci fonctionne très bien.
Ensuite ma carte graphique en pci-express.
Le bug que j'essaie de déterminer ici est arrivé bien après ces changements...
En usb, deux disques externes, branchés mais à l'arrêt la plupart du temps, un onduleur, un scanner et une imprimante.
Pour le reste, rien n'a changé depuis des lustres...

N'y a t-il pas moyen d'affiner les recherches en console ? (mes connaissances en ce domaine sont pour le moins limitées)
Car, si ça continue, j'en prend chaque fois pour 6mn mini avant d'atteindre le bureau !
Si je débranche un à un, chaque usb...imagine...

Malizor · Le 03/01/2010, à 12:57

Pas besoin de les débrancher un a un pour le moment, tu peux déjà essayer d'en débrancher le plus possible d'un coup pour voir si ça change quelque chose.

Ansuz · Le 03/01/2010, à 13:21

Bon, j'ai arrêté ma machine, et débranché tous les usb, excepté souris et clavier.
En fait, j'en ai débranché 7 ! (c'est fou ce que l'on accumule avec le temps)

Donc boot à froid = RAS , tout à fait normal 36s environ.
Puis, reboot afin de confirmer = OK également.

Que dois-je faire maintenant ?

Malizor · Le 03/01/2010, à 13:27

Comme tu l'as vu précédemment, ton problème ne se manifeste que par intermitence.
Donc on peut pas trop conclure pour l'instant.

Je te conseil de ne rebrancher que l'indispensable pour le moment, c'est à l'usage qu'on pourra déduire si le problème viens vraiment d'un périphérique.

(je suis en train de disséquer ton dmesg)

Dernière modification par Malaria (Le 03/01/2010, à 13:29)

Ansuz · Le 03/01/2010, à 13:35

Oui, en fait c'est bien l'intermittence du problème, qui pose problème !
Je vais suivre ton conseil et ne rebrancher que l'essentiel pour le moment. En fait je le rappelle, j'utilise ce même matériel depuis plusieurs versions d'Ubuntu sans le moindre souci...
C'est cela qui est incompréhensible, ou serait-ce une histoire de mise à jour buggée, mais dans ce cas je pense que je ne serais pas le seul ?

Encore merci pour ton aide.

Malizor · Le 03/01/2010, à 14:38

(En attendant d'isolé un éventuel périphérique posant problème)

Pour info, j'ai comparé les 2 dmesg (celui du boot normal et l'autre) et j'ai trouvé des trucs bizarre (si des connaisseurs passent dans le coin... parce que là j'arrive aux limites de ce que je connais...)

1/ Dans les 2 situations, le matériel n'est pas forcément reconnu dans le même ordre (c'est du détail certes, mais tout est censé être identique d'un boot à l'autre normalement, non ?)
2/ J'ai trouvé (grâce à diffuse et à un morceau de bravoure à base de cat et de cut) deux messages qui apparaissent lors du bon boot mais pas dans l'autre :

sda1 sda2 < sda5

(en 1.758869)
et

usb 4-2: configuration #1 chosen from 1 choice

(en 5.007344)

Je ne sais pas trop ce que ça peux vouloir dire (ou même si c'est vraiment important) mais ça mettra peut-être quelqu'un sur la voie...

@Ansuz : Confirmes-tu n'avoir rien changé entre ces 2 démarrages ?

Ansuz · Le 03/01/2010, à 15:31

Non, je confirme, je n'ai absolument rien changé entre ces deux démarrages.
Je n'ai débranché les périphériques usb qu'après, à ta demande.

Étrange, en effet, mais je ne suis pas expert en matière de console...
Si quelque personne avisée pouvait donner son avis, j'en serais heureux.

Ansuz · Le 04/01/2010, à 20:54

Personne ne peut m'en dire plus ?

Malizor · Le 04/01/2010, à 21:44

En attendant tu peux continuer dans ton coin, si tu estimes que tu as fais suffisamment de boot sans problème tu peux rebrancher un périphérique et rebelotte jusqu'à isoler un éventuel fautif.

Ansuz · Le 05/01/2010, à 18:30

Après avoir rebranché deux périphériques usb, en l'occurrence une webcam logitech et un onduleur, c'est repartit pour un tour: ( de 6minutes, je suis maintenant à 8 minutes pour enfin arriver sur le bureau... )

[    1.088289] EDD information not available.
[    1.104940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.156531] ata1: SATA link down (SStatus 0 SControl 300)
[    1.156560] ata2: SATA link down (SStatus 0 SControl 300)
[    1.162586] ata6: SATA link down (SStatus 0 SControl 300)
[    1.173089] ata5: SATA link down (SStatus 0 SControl 300)
[    1.208056] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.340370] usb 2-2: configuration #1 chosen from 1 choice
[    1.340468] hub 2-2:1.0: USB hub found
[    1.340569] hub 2-2:1.0: 2 ports detected
[    1.564025] usb 2-4: new high speed USB device using ehci_hcd and address 4
[    1.640119] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.640136] ata3.00: SATA link down (SStatus 0 SControl 300)
[    1.640139] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.640156] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.655350] ata3.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.655356] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.661811] ata4.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.661817] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.669222] ata3.00: configured for UDMA/133
[    1.669327] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.669430] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.669456] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.669489] sd 2:0:0:0: [sda] Write Protect is off
[    1.669493] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.669509] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.669595]  sda: sda1 sda2 <
[    1.676914] ata4.00: configured for UDMA/133
[    1.676993] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.677096] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.677120] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.677152] sd 3:0:0:0: [sdb] Write Protect is off
[    1.677155] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.677171] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.677247]  sdb:
[    1.680610] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    1.681822]  sdb1 sdb2 sdb3
[    1.682079] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.684713]  sda5sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.688306] Uniform CD-ROM driver Revision: 3.20
[    1.688353] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.688379] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.689284] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
[    1.690834]  sda6 >
[    1.691022] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.691943] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.692012] sr 6:0:1:0: Attached scsi CD-ROM sr1
[    1.692052] sr 6:0:1:0: Attached scsi generic sg3 type 5
[    1.703063] usb 2-4: configuration #1 chosen from 1 choice
[    1.859347] Freeing unused kernel memory: 540k freed
[    1.859544] Write protecting the kernel text: 4568k
[    1.859576] Write protecting the kernel read-only data: 1836k
[    1.935817] Linux agpgart interface v0.103
[    1.959968] sky2 driver version 1.23
[    1.960051] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.960062] sky2 0000:02:00.0: setting latency timer to 64
[    1.960080] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    1.960158]   alloc irq_desc for 28 on node -1
[    1.960159]   alloc kstat_irqs on node -1
[    1.960170] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    1.960649] sky2 eth0: addr 00:1a:92:20:58:21
[    1.981697] Floppy drive(s): fd0 is 1.44M
[    2.000663] FDC 0 is a post-1991 82077
[    2.003135] ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.056336] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.056399] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.056435] skge 1.13 addr 0xfeaf4000 irq 19 chip Yukon-Lite rev 9
[    2.056929] skge eth1: addr 00:1a:92:20:50:4d
[    2.108040] usb 9-1: new full speed USB device using uhci_hcd and address 2
[    2.313450] usb 9-1: configuration #1 chosen from 1 choice
[    2.620044] usb 4-2: new full speed USB device using ohci_hcd and address 2
[    2.691746] vesafb: framebuffer at 0xfb000000, mapped to 0xf8200000, using 5120k, total 14336k
[    2.691752] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[    2.691755] vesafb: protected mode interface info at c000:c140
[    2.691758] vesafb: pmi: set display start = c00cc1a3, set palette = c00cc1fe
[    2.691762] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    2.691778] vesafb: scrolling: redraw
[    2.691781] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.691812] fb0: VESA VGA frame buffer device
[    2.695445] Console: switching to colour frame buffer device 160x64
[    2.837885] xor: automatically using best checksumming function: pIII_sse
[    2.855993]    pIII_sse  : 10637.000 MB/sec
[    2.855995] xor: using function: pIII_sse (10637.000 MB/sec)
[    2.857574] device-mapper: dm-raid45: initialized v0.2594b
[    2.865037] md: linear personality registered for level -1
[    2.866600] md: multipath personality registered for level -4
[    2.867993] md: raid0 personality registered for level 0
[    2.870160] md: raid1 personality registered for level 1
[    2.871637] async_tx: api initialized (async)
[    2.939997] raid6: int32x1   1163 MB/s
[    3.008011] raid6: int32x2   1049 MB/s
[    3.076058] raid6: int32x4    893 MB/s
[    3.144013] raid6: int32x8    733 MB/s
[    3.212006] raid6: mmxx1     3800 MB/s
[    3.280003] raid6: mmxx2     4394 MB/s
[    3.328081] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000113f3b9]
[    3.348006] raid6: sse1x1    2633 MB/s
[    3.416010] raid6: sse1x2    3327 MB/s
[    3.484005] raid6: sse2x1    4915 MB/s
[    3.552003] raid6: sse2x2    5801 MB/s
[    3.552005] raid6: using algorithm sse2x2 (5801 MB/s)
[    3.553905] md: raid6 personality registered for level 6
[    3.553907] md: raid5 personality registered for level 5
[    3.553908] md: raid4 personality registered for level 4
[    3.558377] md: raid10 personality registered for level 10
[    3.955328] PM: Starting manual resume from disk
[    3.955331] PM: Resume from partition 8:5
[    3.955332] PM: Checking hibernation image.
[    3.955498] PM: Resume from disk failed.
[    3.999895] kjournald starting.  Commit interval 5 seconds
[    3.999901] EXT3-fs: mounted filesystem with writeback data mode.
[    4.615015] type=1505 audit(1262714005.023:2): operation="profile_load" pid=488 name=/usr/share/gdm/guest-session/Xsession
[    4.629049] type=1505 audit(1262714005.039:3): operation="profile_load" pid=489 name=/sbin/dhclient3
[    4.629586] type=1505 audit(1262714005.039:4): operation="profile_load" pid=489 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.629850] type=1505 audit(1262714005.039:5): operation="profile_load" pid=489 name=/usr/lib/connman/scripts/dhclient-script
[    4.654563] type=1505 audit(1262714005.063:6): operation="profile_load" pid=490 name=/usr/bin/evince
[    4.662387] type=1505 audit(1262714005.071:7): operation="profile_load" pid=490 name=/usr/bin/evince-previewer
[    4.666993] type=1505 audit(1262714005.075:8): operation="profile_load" pid=490 name=/usr/bin/evince-thumbnailer
[    4.679988] type=1505 audit(1262714005.087:9): operation="profile_load" pid=492 name=/usr/lib/cups/backend/cups-pdf
[    4.680603] type=1505 audit(1262714005.091:10): operation="profile_load" pid=492 name=/usr/sbin/cupsd
[    5.587918] Adding 3903752k swap on /dev/sda5.  Priority:-1 extents:1 across:3903752k 
[    6.088944] EXT3 FS on sda1, internal journal
[    6.617845] udev: starting version 147
[    7.888267] lp: driver loaded but no devices found
[    8.400288] psmouse serio1: ID: 10 00 64
[    8.834601] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.027740] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    9.091643] kjournald starting.  Commit interval 5 seconds
[    9.092046] EXT3 FS on sda6, internal journal
[    9.092051] EXT3-fs: mounted filesystem with writeback data mode.
[    9.218758] nvidia: module license 'NVIDIA' taints kernel.
[    9.218762] Disabling lock debugging due to kernel taint
[    9.398879] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[    9.398891] usbcore: registered new interface driver usblp
[    9.470199] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.470205] nvidia 0000:01:00.0: setting latency timer to 64
[    9.470298] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   11.419543]   alloc irq_desc for 22 on node -1
[   11.419546]   alloc kstat_irqs on node -1
[   11.419551] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.419573] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.210842] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   14.452811] __ratelimit: 9 callbacks suppressed
[   14.452813] type=1505 audit(1262710414.863:14): operation="profile_replace" pid=1151 name=/usr/share/gdm/guest-session/Xsession
[   14.453948] type=1505 audit(1262710414.863:15): operation="profile_replace" pid=1152 name=/sbin/dhclient3
[   14.454440] type=1505 audit(1262710414.863:16): operation="profile_replace" pid=1152 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   14.454706] type=1505 audit(1262710414.863:17): operation="profile_replace" pid=1152 name=/usr/lib/connman/scripts/dhclient-script
[   14.457083] type=1505 audit(1262710414.867:18): operation="profile_replace" pid=1153 name=/usr/bin/evince
[   14.464970] type=1505 audit(1262710414.875:19): operation="profile_replace" pid=1153 name=/usr/bin/evince-previewer
[   14.469590] type=1505 audit(1262710414.879:20): operation="profile_replace" pid=1153 name=/usr/bin/evince-thumbnailer
[   14.477576] type=1505 audit(1262710414.887:21): operation="profile_replace" pid=1156 name=/usr/lib/cups/backend/cups-pdf
[   14.478144] type=1505 audit(1262710414.887:22): operation="profile_replace" pid=1156 name=/usr/sbin/cupsd
[   14.479752] type=1505 audit(1262710414.887:23): operation="profile_replace" pid=1157 name=/usr/sbin/mysqld-akonadi
[   14.616473] sky2 eth0: enabling interface
[   14.616600] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.632360] skge eth1: enabling interface
[   14.635575] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.373625] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   16.373749] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.069889] ppdev: user-space parallel port driver
[   24.519326] CPU0 attaching NULL sched-domain.
[   24.519330] CPU1 attaching NULL sched-domain.
[   24.536077] CPU0 attaching sched-domain:
[   24.536080]  domain 0: span 0-1 level MC
[   24.536083]   groups: 0 1
[   24.536088]   domain 1: span 0-1 level CPU
[   24.536090]    groups: 0-1 (__cpu_power = 2048)
[   24.536096] CPU1 attaching sched-domain:
[   24.536098]  domain 0: span 0-1 level MC
[   24.536100]   groups: 1 0
[   24.536104]   domain 1: span 0-1 level CPU
[   24.536107]    groups: 0-1 (__cpu_power = 2048)
[   26.888016] eth0: no IPv6 routers present
[  240.392062] INFO: task khubd:26 blocked for more than 120 seconds.
[  240.392066] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392069] khubd         D c08145c0     0    26      2 0x00000000
[  240.392073]  f713bdd4 00000046 00000000 c08145c0 f70bcdf8 c08145c0 53927f1a 00000002
[  240.392081]  c08145c0 c08145c0 f70bcdf8 c08145c0 53926b89 00000002 c08145c0 e60cf180
[  240.392087]  f70bcb60 f683b680 f713bddc f713be08 f713bdf8 c0411125 00000000 f70bcb60
[  240.392094] Call Trace:
[  240.392101]  [<c0411125>] usb_kill_urb+0x65/0xa0
[  240.392106]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  240.392110]  [<c0412624>] usb_start_wait_urb+0xa4/0xb0
[  240.392113]  [<c0412920>] usb_control_msg+0xc0/0x120
[  240.392117]  [<c040c159>] hub_port_init+0x569/0x7b0
[  240.392121]  [<c040cd7a>] hub_port_connect_change+0x19a/0x830
[  240.392124]  [<c0412930>] ? usb_control_msg+0xd0/0x120
[  240.392128]  [<c040e4c5>] hub_events+0x1f5/0x500
[  240.392131]  [<c056efdc>] ? schedule+0x40c/0x730
[  240.392134]  [<c0138097>] ? finish_task_switch+0x57/0xe0
[  240.392138]  [<c015c3da>] ? finish_wait+0x4a/0x70
[  240.392141]  [<c040e7d0>] ? hub_thread+0x0/0x150
[  240.392144]  [<c040e805>] hub_thread+0x35/0x150
[  240.392147]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  240.392150]  [<c015bf8c>] kthread+0x7c/0x90
[  240.392154]  [<c015bf10>] ? kthread+0x0/0x90
[  240.392157]  [<c0104007>] kernel_thread_helper+0x7/0x10
[  240.392162] INFO: task udev-configure-:860 blocked for more than 120 seconds.
[  240.392164] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392166] udev-configur D c08145c0     0   860      1 0x00000000
[  240.392170]  e6605d58 00000082 e6605d20 c08145c0 f6576718 c08145c0 1e33f200 00000002
[  240.392177]  c08145c0 c08145c0 f6576718 c08145c0 1e32136e 00000002 c08145c0 e65b4a80
[  240.392183]  f6576480 7fffffff f6939498 f6576480 e6605db4 c056f735 00000292 e6605d78
[  240.392190] Call Trace:
[  240.392194]  [<c056f735>] schedule_timeout+0x185/0x200
[  240.392198]  [<c040af00>] ? kick_khubd+0x40/0x90
[  240.392201]  [<c040b6fd>] ? hub_activate+0x16d/0x2b0
[  240.392204]  [<c0570e3a>] ? _spin_lock_irqsave+0x2a/0x40
[  240.392207]  [<c0570447>] __down+0x57/0x90
[  240.392210]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  240.392214]  [<c0160dd4>] down+0x34/0x40
[  240.392217]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  240.392221]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  240.392224]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  240.392227]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  240.392230]  [<c0418be0>] ? match_devt+0x0/0x20
[  240.392234]  [<c01ea80a>] ? exact_lock+0xa/0x20
[  240.392238]  [<c03a4d66>] ? kobj_lookup+0x106/0x150
[  240.392241]  [<c01ea6d0>] ? exact_match+0x0/0x10
[  240.392244]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  240.392248]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  240.392253]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  240.392257]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  240.392260]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  240.392264]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  240.392268]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  240.392271]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  240.392274]  [<c01e5939>] ? sys_open+0x29/0x40
[  240.392277]  [<c010336c>] syscall_call+0x7/0xb
[  240.392289] INFO: task devkit-power-da:1726 blocked for more than 120 seconds.
[  240.392291] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.392293] devkit-power- D c08145c0     0  1726      1 0x00000000
[  240.392298]  e5f4dd58 00000086 e6500000 c08145c0 e603a848 c08145c0 979e456e 00000005
[  240.392304]  c08145c0 c08145c0 e603a848 c08145c0 00000000 00000005 c08145c0 e6750e00
[  240.392311]  e603a5b0 7fffffff f6939498 e603a5b0 e5f4ddb4 c056f735 f6a31c60 e5f4dd7c
[  240.392317] Call Trace:
[  240.392320]  [<c056f735>] schedule_timeout+0x185/0x200
[  240.392324]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  240.392327]  [<c0570f18>] ? _spin_lock+0x8/0x10
[  240.392331]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  240.392334]  [<c0570447>] __down+0x57/0x90
[  240.392337]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  240.392340]  [<c0160dd4>] down+0x34/0x40
[  240.392343]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  240.392346]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  240.392350]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  240.392353]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  240.392356]  [<c0418be0>] ? match_devt+0x0/0x20
[  240.392359]  [<c01f234c>] ? __link_path_walk+0x9bc/0xb90
[  240.392362]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  240.392366]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  240.392369]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  240.392373]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  240.392377]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  240.392380]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  240.392384]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  240.392387]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  240.392390]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  240.392393]  [<c01e5939>] ? sys_open+0x29/0x40
[  240.392396]  [<c010336c>] syscall_call+0x7/0xb
[  360.392017] INFO: task khubd:26 blocked for more than 120 seconds.
[  360.392021] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392024] khubd         D c08145c0     0    26      2 0x00000000
[  360.392028]  f713bdd4 00000046 00000000 c08145c0 f70bcdf8 c08145c0 53927f1a 00000002
[  360.392035]  c08145c0 c08145c0 f70bcdf8 c08145c0 53926b89 00000002 c08145c0 e60cf180
[  360.392042]  f70bcb60 f683b680 f713bddc f713be08 f713bdf8 c0411125 00000000 f70bcb60
[  360.392049] Call Trace:
[  360.392057]  [<c0411125>] usb_kill_urb+0x65/0xa0
[  360.392062]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  360.392065]  [<c0412624>] usb_start_wait_urb+0xa4/0xb0
[  360.392069]  [<c0412920>] usb_control_msg+0xc0/0x120
[  360.392072]  [<c040c159>] hub_port_init+0x569/0x7b0
[  360.392076]  [<c040cd7a>] hub_port_connect_change+0x19a/0x830
[  360.392080]  [<c0412930>] ? usb_control_msg+0xd0/0x120
[  360.392083]  [<c040e4c5>] hub_events+0x1f5/0x500
[  360.392086]  [<c056efdc>] ? schedule+0x40c/0x730
[  360.392090]  [<c0138097>] ? finish_task_switch+0x57/0xe0
[  360.392093]  [<c015c3da>] ? finish_wait+0x4a/0x70
[  360.392096]  [<c040e7d0>] ? hub_thread+0x0/0x150
[  360.392099]  [<c040e805>] hub_thread+0x35/0x150
[  360.392103]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  360.392106]  [<c015bf8c>] kthread+0x7c/0x90
[  360.392109]  [<c015bf10>] ? kthread+0x0/0x90
[  360.392112]  [<c0104007>] kernel_thread_helper+0x7/0x10
[  360.392119] INFO: task udev-configure-:860 blocked for more than 120 seconds.
[  360.392121] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392123] udev-configur D c08145c0     0   860      1 0x00000000
[  360.392127]  e6605d58 00000082 e6605d20 c08145c0 f6576718 c08145c0 1e33f200 00000002
[  360.392133]  c08145c0 c08145c0 f6576718 c08145c0 1e32136e 00000002 c08145c0 e65b4a80
[  360.392140]  f6576480 7fffffff f6939498 f6576480 e6605db4 c056f735 00000292 e6605d78
[  360.392146] Call Trace:
[  360.392150]  [<c056f735>] schedule_timeout+0x185/0x200
[  360.392154]  [<c040af00>] ? kick_khubd+0x40/0x90
[  360.392157]  [<c040b6fd>] ? hub_activate+0x16d/0x2b0
[  360.392160]  [<c0570e3a>] ? _spin_lock_irqsave+0x2a/0x40
[  360.392164]  [<c0570447>] __down+0x57/0x90
[  360.392166]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  360.392170]  [<c0160dd4>] down+0x34/0x40
[  360.392173]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  360.392176]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  360.392180]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  360.392183]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  360.392186]  [<c0418be0>] ? match_devt+0x0/0x20
[  360.392190]  [<c01ea80a>] ? exact_lock+0xa/0x20
[  360.392193]  [<c03a4d66>] ? kobj_lookup+0x106/0x150
[  360.392196]  [<c01ea6d0>] ? exact_match+0x0/0x10
[  360.392200]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  360.392203]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  360.392208]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  360.392212]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  360.392216]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  360.392220]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  360.392223]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  360.392226]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  360.392229]  [<c01e5939>] ? sys_open+0x29/0x40
[  360.392232]  [<c010336c>] syscall_call+0x7/0xb
[  360.392247] INFO: task devkit-power-da:1726 blocked for more than 120 seconds.
[  360.392249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.392251] devkit-power- D c08145c0     0  1726      1 0x00000000
[  360.392255]  e5f4dd58 00000086 e6500000 c08145c0 e603a848 c08145c0 979e456e 00000005
[  360.392262]  c08145c0 c08145c0 e603a848 c08145c0 00000000 00000005 c08145c0 e6750e00
[  360.392268]  e603a5b0 7fffffff f6939498 e603a5b0 e5f4ddb4 c056f735 f6a31c60 e5f4dd7c
[  360.392275] Call Trace:
[  360.392278]  [<c056f735>] schedule_timeout+0x185/0x200
[  360.392282]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  360.392285]  [<c0570f18>] ? _spin_lock+0x8/0x10
[  360.392288]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  360.392292]  [<c0570447>] __down+0x57/0x90
[  360.392294]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  360.392298]  [<c0160dd4>] down+0x34/0x40
[  360.392301]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  360.392304]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  360.392307]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  360.392310]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  360.392313]  [<c0418be0>] ? match_devt+0x0/0x20
[  360.392316]  [<c01f234c>] ? __link_path_walk+0x9bc/0xb90
[  360.392320]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  360.392324]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  360.392327]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  360.392331]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  360.392334]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  360.392338]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  360.392342]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  360.392345]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  360.392348]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  360.392351]  [<c01e5939>] ? sys_open+0x29/0x40
[  360.392354]  [<c010336c>] syscall_call+0x7/0xb
[  480.392514] INFO: task khubd:26 blocked for more than 120 seconds.
[  480.392518] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.392521] khubd         D c08145c0     0    26      2 0x00000000
[  480.392525]  f713bdd4 00000046 00000000 c08145c0 f70bcdf8 c08145c0 53927f1a 00000002
[  480.392533]  c08145c0 c08145c0 f70bcdf8 c08145c0 53926b89 00000002 c08145c0 e60cf180
[  480.392539]  f70bcb60 f683b680 f713bddc f713be08 f713bdf8 c0411125 00000000 f70bcb60
[  480.392546] Call Trace:
[  480.392554]  [<c0411125>] usb_kill_urb+0x65/0xa0
[  480.392558]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  480.392562]  [<c0412624>] usb_start_wait_urb+0xa4/0xb0
[  480.392566]  [<c0412920>] usb_control_msg+0xc0/0x120
[  480.392569]  [<c040c159>] hub_port_init+0x569/0x7b0
[  480.392573]  [<c040cd7a>] hub_port_connect_change+0x19a/0x830
[  480.392576]  [<c0412930>] ? usb_control_msg+0xd0/0x120
[  480.392580]  [<c040e4c5>] hub_events+0x1f5/0x500
[  480.392583]  [<c056efdc>] ? schedule+0x40c/0x730
[  480.392587]  [<c0138097>] ? finish_task_switch+0x57/0xe0
[  480.392590]  [<c015c3da>] ? finish_wait+0x4a/0x70
[  480.392593]  [<c040e7d0>] ? hub_thread+0x0/0x150
[  480.392596]  [<c040e805>] hub_thread+0x35/0x150
[  480.392599]  [<c015c280>] ? autoremove_wake_function+0x0/0x40
[  480.392603]  [<c015bf8c>] kthread+0x7c/0x90
[  480.392606]  [<c015bf10>] ? kthread+0x0/0x90
[  480.392609]  [<c0104007>] kernel_thread_helper+0x7/0x10
[  480.392615] INFO: task udev-configure-:860 blocked for more than 120 seconds.
[  480.392617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.392619] udev-configur D c08145c0     0   860      1 0x00000000
[  480.392623]  e6605d58 00000082 e6605d20 c08145c0 f6576718 c08145c0 1e33f200 00000002
[  480.392630]  c08145c0 c08145c0 f6576718 c08145c0 1e32136e 00000002 c08145c0 e65b4a80
[  480.392636]  f6576480 7fffffff f6939498 f6576480 e6605db4 c056f735 00000292 e6605d78
[  480.392643] Call Trace:
[  480.392646]  [<c056f735>] schedule_timeout+0x185/0x200
[  480.392650]  [<c040af00>] ? kick_khubd+0x40/0x90
[  480.392653]  [<c040b6fd>] ? hub_activate+0x16d/0x2b0
[  480.392657]  [<c0570e3a>] ? _spin_lock_irqsave+0x2a/0x40
[  480.392660]  [<c0570447>] __down+0x57/0x90
[  480.392663]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  480.392666]  [<c0160dd4>] down+0x34/0x40
[  480.392669]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  480.392673]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  480.392676]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  480.392679]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  480.392682]  [<c0418be0>] ? match_devt+0x0/0x20
[  480.392686]  [<c01ea80a>] ? exact_lock+0xa/0x20
[  480.392690]  [<c03a4d66>] ? kobj_lookup+0x106/0x150
[  480.392693]  [<c01ea6d0>] ? exact_match+0x0/0x10
[  480.392696]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  480.392700]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  480.392704]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  480.392708]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  480.392712]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  480.392716]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  480.392719]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  480.392722]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  480.392726]  [<c01e5939>] ? sys_open+0x29/0x40
[  480.392729]  [<c010336c>] syscall_call+0x7/0xb
[  480.392743] INFO: task devkit-power-da:1726 blocked for more than 120 seconds.
[  480.392745] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.392747] devkit-power- D c08145c0     0  1726      1 0x00000000
[  480.392751]  e5f4dd58 00000086 e6500000 c08145c0 e603a848 c08145c0 979e456e 00000005
[  480.392758]  c08145c0 c08145c0 e603a848 c08145c0 00000000 00000005 c08145c0 e6750e00
[  480.392764]  e603a5b0 7fffffff f6939498 e603a5b0 e5f4ddb4 c056f735 f6a31c60 e5f4dd7c
[  480.392770] Call Trace:
[  480.392774]  [<c056f735>] schedule_timeout+0x185/0x200
[  480.392777]  [<c012d3cd>] ? kmap_atomic_prot+0xcd/0xf0
[  480.392781]  [<c0570f18>] ? _spin_lock+0x8/0x10
[  480.392784]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  480.392788]  [<c0570447>] __down+0x57/0x90
[  480.392790]  [<c040baca>] ? hub_ioctl+0x7a/0xa0
[  480.392794]  [<c0160dd4>] down+0x34/0x40
[  480.392797]  [<c041b061>] usbdev_ioctl+0x71/0xa10
[  480.392800]  [<c0414917>] ? usb_autopm_do_device+0x67/0xf0
[  480.392803]  [<c0571127>] ? unlock_kernel+0x27/0x30
[  480.392806]  [<c041ae10>] ? usbdev_open+0x80/0x260
[  480.392809]  [<c0418be0>] ? match_devt+0x0/0x20
[  480.392813]  [<c01f234c>] ? __link_path_walk+0x9bc/0xb90
[  480.392816]  [<c01df8eb>] ? __slab_alloc+0x19b/0x260
[  480.392819]  [<c01eaa5d>] ? chrdev_open+0xcd/0x190
[  480.392823]  [<c01e5b07>] ? __dentry_open+0x187/0x230
[  480.392827]  [<c019a371>] ? rb_reserve_next_event+0x91/0x1b0
[  480.392830]  [<c019a613>] ? ring_buffer_lock_reserve+0x83/0x150
[  480.392834]  [<c019f243>] ? trace_nowake_buffer_unlock_commit+0x33/0x60
[  480.392838]  [<c01f51e3>] vfs_ioctl+0x73/0x90
[  480.392841]  [<c01f54b1>] do_vfs_ioctl+0x71/0x310
[  480.392844]  [<c01f57af>] sys_ioctl+0x5f/0x80
[  480.392847]  [<c01e5939>] ? sys_open+0x29/0x40
[  480.392850]  [<c010336c>] syscall_call+0x7/0xb
marc@ubuntu:~$

L'événement est tellement aléatoire que je n'arrive pas à croire qu'il s'agisse d'un des deux périphs rebranchés.
Après tout, ma machine fonctionnait très bien avec les mêmes attributs auparavant.

Qu'est-ce donc que khubd, task udev-configure, task devkit-power ???

Je commence réellement à en perdre mon latin...

Ansuz · Le 05/01/2010, à 19:28

Et un reboot plus tard, aucun problème. En 35 secondes...
Je n'ai absolument rien changé depuis le précédent message, tout les usb branchés:

[    0.245181] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.245182] pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.245184] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.245185] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.245187] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.245189] pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.245191] pci_bus 0000:05: resource 2 pref mem [0xbc000000-0xbc0fffff]
[    0.245192] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.245194] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.245214] NET: Registered protocol family 2
[    0.245277] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.245474] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.245719] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.245834] TCP: Hash tables configured (established 131072 bind 65536)
[    0.245838] TCP reno registered
[    0.245884] NET: Registered protocol family 1
[    0.245923] Trying to unpack rootfs image as initramfs...
[    0.384933] Freeing initrd memory: 8430k freed
[    0.387472] cpufreq-nforce2: No nForce2 chipset.
[    0.387496] Scanning for low memory corruption every 60 seconds
[    0.387569] audit: initializing netlink socket (disabled)
[    0.387582] type=2000 audit(1262719050.384:1): initialized
[    0.393332] highmem bounce pool size: 64 pages
[    0.393337] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.394329] VFS: Disk quotas dquot_6.5.2
[    0.394371] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.394742] fuse init (API version 7.12)
[    0.394798] msgmni has been set to 1681
[    0.394949] alg: No test for stdrng (krng)
[    0.394960] io scheduler noop registered
[    0.394962] io scheduler anticipatory registered
[    0.394965] io scheduler deadline registered
[    0.394993] io scheduler cfq registered (default)
[    0.483254] pci 0000:01:00.0: Boot video device
[    0.483359]   alloc irq_desc for 24 on node -1
[    0.483360]   alloc kstat_irqs on node -1
[    0.483366] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.483371] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.483444]   alloc irq_desc for 25 on node -1
[    0.483445]   alloc kstat_irqs on node -1
[    0.483450] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.483456] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.483540]   alloc irq_desc for 26 on node -1
[    0.483542]   alloc kstat_irqs on node -1
[    0.483547] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.483553] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.483637]   alloc irq_desc for 27 on node -1
[    0.483638]   alloc kstat_irqs on node -1
[    0.483643] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.483649] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.483713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.483785] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.483882] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.483887] ACPI: Power Button [PWRF]
[    0.483930] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.483935] ACPI: Power Button [PWRB]
[    0.484252] ACPI Warning: Incorrect checksum in table [SSDT] - FE, should be 05 20090521 tbutils-246
[    0.484260] ACPI: SSDT bbfa8db0 002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.484468] processor LNXCPU:00: registered as cooling_device0
[    0.484577] ACPI: SSDT bbfa90a0 002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.484782] processor LNXCPU:01: registered as cooling_device1
[    0.485913] isapnp: Scanning for PnP cards...
[    0.509874] Switched to high resolution mode on CPU 1
[    0.512692] Switched to high resolution mode on CPU 0
[    0.838676] isapnp: No Plug & Play device found
[    0.839429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.839513] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.839761] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.840541] brd: module loaded
[    0.840839] loop: module loaded
[    0.840890] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.840941] ahci 0000:03:00.0: version 3.0
[    0.840952] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.856057] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.856064] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.856073] ahci 0000:03:00.0: setting latency timer to 64
[    0.856201] scsi0 : ahci
[    0.856267] scsi1 : ahci
[    0.856319] ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
[    0.856324] ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
[    0.856361] ata_piix 0000:00:1f.2: version 2.13
[    0.856368]   alloc irq_desc for 19 on node -1
[    0.856369]   alloc kstat_irqs on node -1
[    0.856373] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.856378] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.856410] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.856451] scsi2 : ata_piix
[    0.856493] scsi3 : ata_piix
[    0.857786] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[    0.857793] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[    0.857812] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.857817] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.857845] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.857881] scsi4 : ata_piix
[    0.857934] scsi5 : ata_piix
[    0.858713] ata5: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
[    0.858718] ata6: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
[    0.858999] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.859005] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.859028] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    0.859076] scsi6 : pata_jmicron
[    0.859142] scsi7 : pata_jmicron
[    0.859629] ata7: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 17
[    0.859633] ata8: PATA max UDMA/100 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 17
[    0.860032] Fixed MDIO Bus: probed
[    0.860056] PPP generic driver version 2.4.2
[    0.860113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.860126]   alloc irq_desc for 18 on node -1
[    0.860128]   alloc kstat_irqs on node -1
[    0.860131] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.860139] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.860142] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.860173] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.864080] ehci_hcd 0000:00:1a.7: debug port 1
[    0.864087] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.864107] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
[    0.876032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.876105] usb usb1: configuration #1 chosen from 1 choice
[    0.876136] hub 1-0:1.0: USB hub found
[    0.876145] hub 1-0:1.0: 4 ports detected
[    0.876196]   alloc irq_desc for 23 on node -1
[    0.876198]   alloc kstat_irqs on node -1
[    0.876202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.876214] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.876217] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.876247] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.880163] ehci_hcd 0000:00:1d.7: debug port 1
[    0.880168] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.880177] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[    0.896031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.896101] usb usb2: configuration #1 chosen from 1 choice
[    0.896131] hub 2-0:1.0: USB hub found
[    0.896139] hub 2-0:1.0: 6 ports detected
[    0.896195]   alloc irq_desc for 21 on node -1
[    0.896197]   alloc kstat_irqs on node -1
[    0.896201] ehci_hcd 0000:05:02.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.896213] ehci_hcd 0000:05:02.2: EHCI Host Controller
[    0.896247] ehci_hcd 0000:05:02.2: new USB bus registered, assigned bus number 3
[    0.920030] ehci_hcd 0000:05:02.2: irq 21, io mem 0xfeaffc00
[    0.932023] ehci_hcd 0000:05:02.2: USB 2.0 started, EHCI 1.00
[    0.932084] usb usb3: configuration #1 chosen from 1 choice
[    0.932114] hub 3-0:1.0: USB hub found
[    0.932121] hub 3-0:1.0: 5 ports detected
[    0.932183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.932205] ohci_hcd 0000:05:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.932223] ohci_hcd 0000:05:02.0: OHCI Host Controller
[    0.932245] ohci_hcd 0000:05:02.0: new USB bus registered, assigned bus number 4
[    0.932257] ohci_hcd 0000:05:02.0: irq 23, io mem 0xfeafd000
[    1.017840] usb usb4: configuration #1 chosen from 1 choice
[    1.017860] hub 4-0:1.0: USB hub found
[    1.017867] hub 4-0:1.0: 3 ports detected
[    1.017902]   alloc irq_desc for 20 on node -1
[    1.017903]   alloc kstat_irqs on node -1
[    1.017906] ohci_hcd 0000:05:02.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.017914] ohci_hcd 0000:05:02.1: OHCI Host Controller
[    1.017935] ohci_hcd 0000:05:02.1: new USB bus registered, assigned bus number 5
[    1.017951] ohci_hcd 0000:05:02.1: irq 20, io mem 0xfeafe000
[    1.040512] ata7.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[    1.040543] ata7.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
[    1.056536] ata7.00: configured for UDMA/33
[    1.102334] ata7.01: configured for UDMA/66
[    1.102454] usb usb5: configuration #1 chosen from 1 choice
[    1.102474] hub 5-0:1.0: USB hub found
[    1.102481] hub 5-0:1.0: 2 ports detected
[    1.102514] uhci_hcd: USB Universal Host Controller Interface driver
[    1.102530] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102536] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.102538] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.102560] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 6
[    1.102581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e880
[    1.102632] usb usb6: configuration #1 chosen from 1 choice
[    1.102653] hub 6-0:1.0: USB hub found
[    1.102658] hub 6-0:1.0: 2 ports detected
[    1.102690] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.102696] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.102698] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.102719] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 7
[    1.102740] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ec00
[    1.102790] usb usb7: configuration #1 chosen from 1 choice
[    1.102811] hub 7-0:1.0: USB hub found
[    1.102817] hub 7-0:1.0: 2 ports detected
[    1.102852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.102879] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.102881] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.102910] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.102930] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[    1.102982] usb usb8: configuration #1 chosen from 1 choice
[    1.103001] hub 8-0:1.0: USB hub found
[    1.103006] hub 8-0:1.0: 2 ports detected
[    1.103037] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.103043] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.103045] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.103066] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.103086] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[    1.103139] usb usb9: configuration #1 chosen from 1 choice
[    1.103158] hub 9-0:1.0: USB hub found
[    1.103163] hub 9-0:1.0: 2 ports detected
[    1.103194] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.103200] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.103203] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.103224] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.103244] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    1.103296] usb usb10: configuration #1 chosen from 1 choice
[    1.103315] hub 10-0:1.0: USB hub found
[    1.103320] hub 10-0:1.0: 2 ports detected
[    1.103391] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.105576] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.105582] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.105622] mice: PS/2 mouse device common for all mice
[    1.105692] rtc_cmos 00:03: RTC can wake from S4
[    1.105716] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.105737] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.105805] device-mapper: uevent: version 1.0.3
[    1.105937] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.105991] device-mapper: multipath: version 1.1.0 loaded
[    1.105994] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.106104] EISA: Probing bus 0 at eisa.0
[    1.106126] EISA: Detected 0 cards.
[    1.106183] cpuidle: using governor ladder
[    1.106186] cpuidle: using governor menu
[    1.106532] TCP cubic registered
[    1.106635] NET: Registered protocol family 10
[    1.106946] lo: Disabled Privacy Extensions
[    1.107175] NET: Registered protocol family 17
[    1.107187] Bluetooth: L2CAP ver 2.13
[    1.107190] Bluetooth: L2CAP socket layer initialized
[    1.107193] Bluetooth: SCO (Voice Link) ver 0.6
[    1.107195] Bluetooth: SCO socket layer initialized
[    1.107291] Bluetooth: RFCOMM TTY layer initialized
[    1.107296] Bluetooth: RFCOMM socket layer initialized
[    1.107299] Bluetooth: RFCOMM ver 1.11
[    1.107675] Using IPI No-Shortcut mode
[    1.107719] PM: Resume from disk failed.
[    1.107727] registered taskstats version 1
[    1.107825]   Magic number: 10:79:293
[    1.107838] tty tty26: hash matches
[    1.107873] rtc_cmos 00:03: setting system clock to 2010-01-05 19:17:31 UTC (1262719051)
[    1.107878] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.107880] EDD information not available.
[    1.124245] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.176531] ata1: SATA link down (SStatus 0 SControl 300)
[    1.176560] ata2: SATA link down (SStatus 0 SControl 300)
[    1.182576] ata6: SATA link down (SStatus 0 SControl 300)
[    1.193082] ata5: SATA link down (SStatus 0 SControl 300)
[    1.228048] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.360385] usb 2-2: configuration #1 chosen from 1 choice
[    1.360483] hub 2-2:1.0: USB hub found
[    1.360583] hub 2-2:1.0: 2 ports detected
[    1.584012] usb 2-4: new high speed USB device using ehci_hcd and address 4
[    1.660168] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.660182] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.660354] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.660364] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.686519] ata3.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.686526] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.695602] ata4.00: ATA-7: WDC WD5000AAKS-75TMA0, 12.01C01, max UDMA/133
[    1.695608] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.701186] ata3.00: configured for UDMA/133
[    1.701291] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.701394] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.701421] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.701455] sd 2:0:0:0: [sda] Write Protect is off
[    1.701458] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.701475] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.701561]  sda: sda1 sda2 <
[    1.708550] ata4.00: configured for UDMA/133
[    1.708629] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
[    1.708733] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.708757] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.708789] sd 3:0:0:0: [sdb] Write Protect is off
[    1.708793] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.708808] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.708884]  sdb:
[    1.712229] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    1.715608]  sdb1 sdb2 sdb3
[    1.715861] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.715868]  sda5sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.719970] Uniform CD-ROM driver Revision: 3.20
[    1.720040] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.720078] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.720968] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
[    1.722004]  sda6 >
[    1.722235] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.723384] usb 2-4: configuration #1 chosen from 1 choice
[    1.723965] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.724034] sr 6:0:1:0: Attached scsi CD-ROM sr1
[    1.724062] sr 6:0:1:0: Attached scsi generic sg3 type 5
[    1.891398] Freeing unused kernel memory: 540k freed
[    1.891594] Write protecting the kernel text: 4568k
[    1.891626] Write protecting the kernel read-only data: 1836k
[    1.965259] Linux agpgart interface v0.103
[    2.002730] sky2 driver version 1.23
[    2.002769] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.002782] sky2 0000:02:00.0: setting latency timer to 64
[    2.002802] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    2.002880]   alloc irq_desc for 28 on node -1
[    2.002881]   alloc kstat_irqs on node -1
[    2.002893] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    2.003349] sky2 eth0: addr 00:1a:92:20:58:21
[    2.010317] ohci1394 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.027294] Floppy drive(s): fd0 is 1.44M
[    2.047825] FDC 0 is a post-1991 82077
[    2.064627] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.064788] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.064824] skge 1.13 addr 0xfeaf4000 irq 19 chip Yukon-Lite rev 9
[    2.065310] skge eth1: addr 00:1a:92:20:50:4d
[    2.194862] usb 5-2: new low speed USB device using ohci_hcd and address 2
[    2.786131] vesafb: framebuffer at 0xfb000000, mapped to 0xf8200000, using 5120k, total 14336k
[    2.786137] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[    2.786140] vesafb: protected mode interface info at c000:c140
[    2.786143] vesafb: pmi: set display start = c00cc1a3, set palette = c00cc1fe
[    2.786147] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    2.786163] vesafb: scrolling: redraw
[    2.786166] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.786199] fb0: VESA VGA frame buffer device
[    2.789826] Console: switching to colour frame buffer device 160x64
[    3.027218] xor: automatically using best checksumming function: pIII_sse
[    3.044003]    pIII_sse  : 10636.000 MB/sec
[    3.044005] xor: using function: pIII_sse (10636.000 MB/sec)
[    3.045514] device-mapper: dm-raid45: initialized v0.2594b
[    3.052929] md: linear personality registered for level -1
[    3.054481] md: multipath personality registered for level -4
[    3.055881] md: raid0 personality registered for level 0
[    3.058057] md: raid1 personality registered for level 1
[    3.059506] async_tx: api initialized (async)
[    3.128033] raid6: int32x1   1163 MB/s
[    3.196021] raid6: int32x2   1049 MB/s
[    3.264065] raid6: int32x4    891 MB/s
[    3.332029] raid6: int32x8    732 MB/s
[    3.352576] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000113f3b9]
[    3.400014] raid6: mmxx1     3799 MB/s
[    3.468010] raid6: mmxx2     4396 MB/s
[    3.536017] raid6: sse1x1    2632 MB/s
[    3.604010] raid6: sse1x2    3556 MB/s
[    3.672013] raid6: sse2x1    4911 MB/s
[    3.740009] raid6: sse2x2    6664 MB/s
[    3.740010] raid6: using algorithm sse2x2 (6664 MB/s)
[    3.741898] md: raid6 personality registered for level 6
[    3.741899] md: raid5 personality registered for level 5
[    3.741901] md: raid4 personality registered for level 4
[    3.746404] md: raid10 personality registered for level 10
[    3.997179] usb 5-2: configuration #1 chosen from 1 choice
[    4.003462] usbcore: registered new interface driver hiddev
[    4.240073] usb 9-1: new full speed USB device using uhci_hcd and address 2
[    4.450068] usb 9-1: configuration #1 chosen from 1 choice
[    4.756071] usb 4-2: new full speed USB device using ohci_hcd and address 2
[    4.959164] usb 4-2: configuration #1 chosen from 1 choice
[    9.379260] generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.00 Device [MGE ELLIPSE] on usb-0000:05:02.1-2/input0
[    9.379276] usbcore: registered new interface driver usbhid
[    9.379279] usbhid: v2.6:USB HID core driver
[    9.454565] PM: Starting manual resume from disk
[    9.454568] PM: Resume from partition 8:5
[    9.454569] PM: Checking hibernation image.
[    9.454750] PM: Resume from disk failed.
[    9.505341] kjournald starting.  Commit interval 5 seconds
[    9.505350] EXT3-fs: mounted filesystem with writeback data mode.
[   10.045161] type=1505 audit(1262719060.436:2): operation="profile_load" pid=551 name=/usr/share/gdm/guest-session/Xsession
[   10.059365] type=1505 audit(1262719060.448:3): operation="profile_load" pid=552 name=/sbin/dhclient3
[   10.059935] type=1505 audit(1262719060.448:4): operation="profile_load" pid=552 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   10.060206] type=1505 audit(1262719060.452:5): operation="profile_load" pid=552 name=/usr/lib/connman/scripts/dhclient-script
[   10.084809] type=1505 audit(1262719060.476:6): operation="profile_load" pid=553 name=/usr/bin/evince
[   10.092624] type=1505 audit(1262719060.484:7): operation="profile_load" pid=553 name=/usr/bin/evince-previewer
[   10.097229] type=1505 audit(1262719060.488:8): operation="profile_load" pid=553 name=/usr/bin/evince-thumbnailer
[   10.110275] type=1505 audit(1262719060.500:9): operation="profile_load" pid=555 name=/usr/lib/cups/backend/cups-pdf
[   10.110886] type=1505 audit(1262719060.500:10): operation="profile_load" pid=555 name=/usr/sbin/cupsd
[   10.120575] type=1505 audit(1262719060.512:11): operation="profile_load" pid=556 name=/usr/sbin/mysqld-akonadi
[   21.253119] udev: starting version 147
[   21.273639] Adding 3903752k swap on /dev/sda5.  Priority:-1 extents:1 across:3903752k 
[   21.356011] nvidia: module license 'NVIDIA' taints kernel.
[   21.356014] Disabling lock debugging due to kernel taint
[   21.392401] lp: driver loaded but no devices found
[   21.419582]   alloc irq_desc for 22 on node -1
[   21.419584]   alloc kstat_irqs on node -1
[   21.419589] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   21.419612] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.547859] psmouse serio1: ID: 10 00 64
[   21.638780] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.642331] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.642338] nvidia 0000:01:00.0: setting latency timer to 64
[   21.642540] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   21.655489] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[   21.655503] usbcore: registered new interface driver usblp
[   21.701987] Linux video capture interface: v2.00
[   21.717514] gspca: main v2.6.0 registered
[   21.723023] gspca: probing 046d:08da
[   21.738063] EXT3 FS on sda1, internal journal
[   21.829572] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[   22.196610] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   22.465428] kjournald starting.  Commit interval 5 seconds
[   22.465770] EXT3 FS on sda6, internal journal
[   22.465775] EXT3-fs: mounted filesystem with writeback data mode.
[   22.732207] sky2 eth0: enabling interface
[   22.732335] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.748281] skge eth1: enabling interface
[   22.751391] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   22.762697] __ratelimit: 6 callbacks suppressed
[   22.762700] type=1505 audit(1262715473.152:14): operation="profile_replace" pid=1288 name=/usr/share/gdm/guest-session/Xsession
[   22.763852] type=1505 audit(1262715473.152:15): operation="profile_replace" pid=1289 name=/sbin/dhclient3
[   22.764341] type=1505 audit(1262715473.152:16): operation="profile_replace" pid=1289 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   22.764623] type=1505 audit(1262715473.156:17): operation="profile_replace" pid=1289 name=/usr/lib/connman/scripts/dhclient-script
[   22.768197] type=1505 audit(1262715473.156:18): operation="profile_replace" pid=1290 name=/usr/bin/evince
[   22.776981] type=1505 audit(1262715473.168:19): operation="profile_replace" pid=1290 name=/usr/bin/evince-previewer
[   22.781800] type=1505 audit(1262715473.172:20): operation="profile_replace" pid=1290 name=/usr/bin/evince-thumbnailer
[   22.788265] type=1505 audit(1262715473.176:21): operation="profile_replace" pid=1294 name=/usr/lib/cups/backend/cups-pdf
[   22.788848] type=1505 audit(1262715473.180:22): operation="profile_replace" pid=1294 name=/usr/sbin/cupsd
[   22.790793] type=1505 audit(1262715473.180:23): operation="profile_replace" pid=1295 name=/usr/sbin/mysqld-akonadi
[   23.719428] zc3xx: probe 2wr ov vga 0x0000
[   23.791429] zc3xx: probe sensor -> 0011
[   23.791430] zc3xx: Find Sensor HV7131R(c)
[   23.803473] gspca: probe ok
[   23.803484] gspca: probing 046d:08da
[   23.803492] STV06xx: Probing for a stv06xx device
[   23.803493] gspca: probing 046d:08da
[   23.803498] gspca: probing 046d:08da
[   23.803513] usbcore: registered new interface driver zc3xx
[   23.803515] zc3xx: registered
[   23.803678] STV06xx: Probing for a stv06xx device
[   23.803680] gspca: probing 046d:08da
[   23.803692] usbcore: registered new interface driver STV06xx
[   23.803693] STV06xx: registered
[   23.897644] usbcore: registered new interface driver snd-usb-audio
[   24.275459] ppdev: user-space parallel port driver
[   24.471171] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   24.472308] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.671595] CPU0 attaching NULL sched-domain.
[   24.671598] CPU1 attaching NULL sched-domain.
[   24.688545] CPU0 attaching sched-domain:
[   24.688548]  domain 0: span 0-1 level MC
[   24.688550]   groups: 0 1
[   24.688553]   domain 1: span 0-1 level CPU
[   24.688555]    groups: 0-1 (__cpu_power = 2048)
[   24.688558] CPU1 attaching sched-domain:
[   24.688560]  domain 0: span 0-1 level MC
[   24.688561]   groups: 1 0
[   24.688564]   domain 1: span 0-1 level CPU
[   24.688566]    groups: 0-1 (__cpu_power = 2048)
[   25.203866] CPU0 attaching NULL sched-domain.
[   25.203869] CPU1 attaching NULL sched-domain.
[   25.216545] CPU0 attaching sched-domain:
[   25.216547]  domain 0: span 0-1 level MC
[   25.216549]   groups: 0 1
[   25.216553] CPU1 attaching sched-domain:
[   25.216554]  domain 0: span 0-1 level MC
[   25.216556]   groups: 1 0
[   25.937754] usb 9-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[   34.780015] eth0: no IPv6 routers present
marc@ubuntu:~$

Une histoire de fou je vous dit...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 01/01/2010, à 12:06

Fenêtre login et mot de passe interminable à apparaître...

#2 Le 01/01/2010, à 13:12

Re : Fenêtre login et mot de passe interminable à apparaître...

#3 Le 01/01/2010, à 13:42

Re : Fenêtre login et mot de passe interminable à apparaître...

#4 Le 02/01/2010, à 10:50

Re : Fenêtre login et mot de passe interminable à apparaître...

#5 Le 02/01/2010, à 11:03

Re : Fenêtre login et mot de passe interminable à apparaître...

#6 Le 02/01/2010, à 12:03

Re : Fenêtre login et mot de passe interminable à apparaître...

#7 Le 02/01/2010, à 12:16

Re : Fenêtre login et mot de passe interminable à apparaître...

#8 Le 02/01/2010, à 12:35

Re : Fenêtre login et mot de passe interminable à apparaître...

#9 Le 02/01/2010, à 12:41

Re : Fenêtre login et mot de passe interminable à apparaître...

#10 Le 02/01/2010, à 13:15

Re : Fenêtre login et mot de passe interminable à apparaître...

#11 Le 02/01/2010, à 13:26

Re : Fenêtre login et mot de passe interminable à apparaître...

#12 Le 02/01/2010, à 13:42

Re : Fenêtre login et mot de passe interminable à apparaître...

#13 Le 03/01/2010, à 11:25

Re : Fenêtre login et mot de passe interminable à apparaître...

#14 Le 03/01/2010, à 11:45

Re : Fenêtre login et mot de passe interminable à apparaître...

#15 Le 03/01/2010, à 12:27

Re : Fenêtre login et mot de passe interminable à apparaître...

#16 Le 03/01/2010, à 12:57

Re : Fenêtre login et mot de passe interminable à apparaître...

#17 Le 03/01/2010, à 13:21

Re : Fenêtre login et mot de passe interminable à apparaître...

#18 Le 03/01/2010, à 13:27

Re : Fenêtre login et mot de passe interminable à apparaître...

#19 Le 03/01/2010, à 13:35

Re : Fenêtre login et mot de passe interminable à apparaître...

#20 Le 03/01/2010, à 14:38

Re : Fenêtre login et mot de passe interminable à apparaître...

#21 Le 03/01/2010, à 15:31

Re : Fenêtre login et mot de passe interminable à apparaître...

#22 Le 04/01/2010, à 20:54

Re : Fenêtre login et mot de passe interminable à apparaître...

#23 Le 04/01/2010, à 21:44

Re : Fenêtre login et mot de passe interminable à apparaître...

#24 Le 05/01/2010, à 18:30

Re : Fenêtre login et mot de passe interminable à apparaître...

#25 Le 05/01/2010, à 19:28

Re : Fenêtre login et mot de passe interminable à apparaître...

Pied de page des forums