linux 2.6.31-16-generic-pae

aflatoxine · Le 05/01/2010, à 12:35

hier j'ai fais une mise à jour de mon système, surprise ce matin quand j'essaie de lancer l'ordi il me demande de choisir entre linux 2.6.31-16-generic-pae et linux 2.6.31-16 je lance le premier ça ne marche pas le deuxième pareil. Après une dizaine de redémarrage successif j'arrive a retrouver ma session.

du coup je n'ose plus éteindre mon ordi

Une petite idée sur ce qui se passe ?

Dernière modification par aflatoxine (Le 05/01/2010, à 12:36)

Hoper · Le 05/01/2010, à 13:52

Après une dizaine de redémarrage successif j'arrive a retrouver ma session.

Ca désolé mais c'est de la science fiction. Un truc qui marche pas ne marche pas, même si tu reboot 100 fois la machine. Donc à la dizième fois tu as du faire un truc différent...

Bref, il faut plus de détails. "Ca marche pas" c'est pas suffisant. Que se passe -il exactement, message d'erreur etc ?
Et aussi, si tout fonctionne bien en ce moment, regarde sur quel noyau il a booté en tapant : uname -a

misaine · Le 05/01/2010, à 14:09

si ça fonctionne regarde dans le visionneur de journaux systeme , les messages d'erreur notamment xorg.log et dmesg

aflatoxine · Le 05/01/2010, à 16:35

uname -a = Linux XXXXX-desktop 2.6.31-16-generic-pae #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 i686 GNU/Linux

donc apparemment il a bien booté sur le nouveau noyau

aflatoxine · Le 05/01/2010, à 16:36

pour le rapport xorg.log=

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux inuite-desktop 2.6.31-16-generic-pae #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae root=UUID=4585c58c-ee41-482d-9017-4f24770406bb ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 5 12:21:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0221:0000:0391 nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.20 Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.20 Thu Jun 25 19:28:52 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.14.01
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): LG 702S (CRT-1)
(--) NVIDIA(0): LG 702S (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (98, 104); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device USB Laser Wheel Mouse
(**) USB Laser Wheel Mouse: always reports core events
(**) USB Laser Wheel Mouse: Device: "/dev/input/event4"
(II) USB Laser Wheel Mouse: Found 9 mouse buttons
(II) USB Laser Wheel Mouse: Found x and y relative axes
(II) USB Laser Wheel Mouse: Found scroll wheel(s)
(II) USB Laser Wheel Mouse: Configuring as mouse
(**) USB Laser Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) USB Laser Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Laser Wheel Mouse" (type: MOUSE)
(**) USB Laser Wheel Mouse: (accel) keeping acceleration scheme 1
(**) USB Laser Wheel Mouse: (accel) filter chain progression: 2.00
(**) USB Laser Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Laser Wheel Mouse: (accel) set acceleration profile 0
(II) USB Laser Wheel Mouse: initialized for relative axes.

aflatoxine · Le 05/01/2010, à 16:38

rapport dmsg =

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic-pae (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 (Ubuntu 2.6.31-16.53-generic-pae)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f854000 - 2ffa31fc
[ 0.000000] ACPI: RSDP 000f9e60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ff30000 00030 (v01 A M I OEMRSDT 07000321 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ff30200 00081 (v02 A M I OEMFACP 07000321 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ff303f0 0382D (v01 P4P81 P4P81080 00000080 INTL 02002026)
[ 0.000000] ACPI: FACS 3ff40000 00040
[ 0.000000] ACPI: APIC 3ff30390 0005C (v01 A M I OEMAPIC 07000321 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ff40040 0003F (v01 A M I OEMBIOS 07000321 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 133MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00012000 - 00018f40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad9a0] TEXT DATA BSS ==> [0000100000 - 00008ad9a0]
[ 0.000000] #4 [002f854000 - 002ffa31fc] RAMDISK ==> [002f854000 - 002ffa31fc]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008ae000 - 00008b4176] BRK ==> [00008ae000 - 00008b4176]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003ff30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff30
[ 0.000000] On node 0 totalpages: 261823
[ 0.000000] free_area_init_node: node 0, pgdat c078bd20, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 267 pages used for memmap
[ 0.000000] HighMem zone: 33831 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259776
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae root=UUID=4585c58c-ee41-482d-9017-4f24770406bb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5238400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003ff30)
[ 0.000000] Memory: 1017092k/1047744k available (4590k kernel code, 29636k reserved, 2147k data, 544k init, 136392k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc0795000 - 0xc081d000 ( 544 kB)
[ 0.000000] .data : 0xc057b994 - 0xc07947a8 (2147 kB)
[ 0.000000] .text : 0xc0100000 - 0xc057b994 (4590 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2405.208 MHz processor.
[ 0.002350] Console: colour VGA+ 80x25
[ 0.002356] console [tty0] enabled
[ 0.002415] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.41 BogoMIPS (lpj=9620832)
[ 0.002449] Security Framework initialized
[ 0.002483] AppArmor: AppArmor initialized
[ 0.002495] Mount-cache hash table entries: 512
[ 0.002720] Initializing cgroup subsys ns
[ 0.002729] Initializing cgroup subsys cpuacct
[ 0.002735] Initializing cgroup subsys memory
[ 0.002746] Initializing cgroup subsys freezer
[ 0.002750] Initializing cgroup subsys net_cls
[ 0.002774] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.002779] CPU: L2 cache: 512K
[ 0.002783] CPU: Physical Processor ID: 0
[ 0.002786] CPU: Processor Core ID: 0
[ 0.002792] mce: CPU supports 4 MCE banks
[ 0.002807] CPU0: Thermal monitoring enabled (TM1)
[ 0.002823] Performance Counters: no PMU driver, software counters only.
[ 0.002832] Checking 'hlt' instruction... OK.
[ 0.019874] ACPI: Core revision 20090521
[ 0.030776] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070999] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4811.29 BogoMIPS (lpj=9622591)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156960] CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[ 0.156984] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160047] Brought up 2 CPUs
[ 0.160054] Total of 2 processors activated (9621.71 BogoMIPS).
[ 0.160108] CPU0 attaching sched-domain:
[ 0.160113] domain 0: span 0-1 level SIBLING
[ 0.160118] groups: 0 1
[ 0.160128] CPU1 attaching sched-domain:
[ 0.160132] domain 0: span 0-1 level SIBLING
[ 0.160136] groups: 1 0
[ 0.160265] Booting paravirtualized kernel on bare hardware
[ 0.160348] regulator: core version 0.5
[ 0.160348] Time: 11:20:55 Date: 01/05/10
[ 0.160348] NET: Registered protocol family 16
[ 0.160348] EISA bus registered
[ 0.160349] ACPI: bus type pci registered
[ 0.160514] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.160518] PCI: Using configuration type 1 for base access
[ 0.164283] bio: create slab <bio-0> at 0
[ 0.165084] ACPI: EC: Look up EC in DSDT
[ 0.175151] ACPI: Interpreter enabled
[ 0.175164] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.175203] ACPI: Using IOAPIC for interrupt routing
[ 0.185631] ACPI Warning: Incorrect checksum in table [OEMB] - 10, should be 05 20090521 tbutils-246
[ 0.185796] ACPI: No dock devices found.
[ 0.185984] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.186052] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.186066] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.186179] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.186289] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f]
[ 0.186353] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f]
[ 0.186417] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f]
[ 0.186482] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f]
[ 0.186554] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fffc00-0xf7ffffff]
[ 0.186623] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.186630] pci 0000:00:1d.7: PME# disabled
[ 0.186734] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.186745] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.186750] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.186780] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.186789] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.186798] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.186807] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.186817] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.186826] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.186888] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.186942] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff]
[ 0.186951] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf]
[ 0.186960] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf7fff800-0xf7fff9ff]
[ 0.186969] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf7fff400-0xf7fff4ff]
[ 0.187011] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.187018] pci 0000:00:1f.5: PME# disabled
[ 0.187070] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.187078] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
[ 0.187086] pci 0000:01:00.0: reg 18 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.187106] pci 0000:01:00.0: reg 30 32bit mmio: [0xf7de0000-0xf7dfffff]
[ 0.187177] pci 0000:00:01.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
[ 0.187183] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd3c00000-0xf3bfffff]
[ 0.187240] pci 0000:02:05.0: reg 10 32bit mmio: [0xf7efc000-0xf7efffff]
[ 0.187249] pci 0000:02:05.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.187301] pci 0000:02:05.0: supports D1 D2
[ 0.187305] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187311] pci 0000:02:05.0: PME# disabled
[ 0.187356] pci 0000:00:1e.0: transparent bridge
[ 0.187363] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.187369] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
[ 0.187387] pci_bus 0000:00: on NUMA node 0
[ 0.187394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.187534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.196493] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.196638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.196781] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.196922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.197065] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197210] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197357] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.197499] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.197818] SCSI subsystem initialized
[ 0.197859] libata version 3.00 loaded.
[ 0.197859] usbcore: registered new interface driver usbfs
[ 0.197859] usbcore: registered new interface driver hub
[ 0.197859] usbcore: registered new device driver usb
[ 0.197859] ACPI: WMI: Mapper loaded
[ 0.197859] PCI: Using ACPI for IRQ routing
[ 0.208019] Bluetooth: Core ver 2.15
[ 0.208054] NET: Registered protocol family 31
[ 0.208054] Bluetooth: HCI device and connection manager initialized
[ 0.208054] Bluetooth: HCI socket layer initialized
[ 0.208054] NetLabel: Initializing
[ 0.208054] NetLabel: domain hash size = 128
[ 0.208054] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.208065] NetLabel: unlabeled traffic allowed by default
[ 0.208219] hpet clockevent registered
[ 0.208224] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.208232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.208241] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.225043] pnp: PnP ACPI init
[ 0.225081] ACPI: bus type pnp registered
[ 0.230559] pnp: PnP ACPI: found 13 devices
[ 0.230564] ACPI: ACPI bus type pnp unregistered
[ 0.230572] ASUS P4P800 detected. Disabling PnPBIOS
[ 0.230575] PnPBIOS: Disabled
[ 0.230598] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.230603] system 00:09: ioport range 0x290-0x297 has been reserved
[ 0.230615] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.230620] system 00:0a: ioport range 0x800-0x87f has been reserved
[ 0.230625] system 00:0a: ioport range 0x480-0x4bf has been reserved
[ 0.230635] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.230641] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.230652] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.230657] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.230668] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.230673] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[ 0.230678] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.230683] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.230688] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.265472] AppArmor: AppArmor Filesystem Enabled
[ 0.265523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.265528] pci 0000:00:01.0: IO window: disabled
[ 0.265535] pci 0000:00:01.0: MEM window: 0xf3d00000-0xf7dfffff
[ 0.265542] pci 0000:00:01.0: PREFETCH window: 0xd3c00000-0xf3bfffff
[ 0.265549] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.265555] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.265563] pci 0000:00:1e.0: MEM window: 0xf7e00000-0xf7efffff
[ 0.265570] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.265590] pci 0000:00:1e.0: setting latency timer to 64
[ 0.265598] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.265603] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.265607] pci_bus 0000:01: resource 1 mem: [0xf3d00000-0xf7dfffff]
[ 0.265612] pci_bus 0000:01: resource 2 pref mem [0xd3c00000-0xf3bfffff]
[ 0.265616] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.265620] pci_bus 0000:02: resource 1 mem: [0xf7e00000-0xf7efffff]
[ 0.265625] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.265629] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.265697] NET: Registered protocol family 2
[ 0.265865] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.266461] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.267584] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.268360] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.268367] TCP reno registered
[ 0.268580] NET: Registered protocol family 1
[ 0.268713] Trying to unpack rootfs image as initramfs...
[ 0.561438] Freeing initrd memory: 7484k freed
[ 0.573239] cpufreq-nforce2: No nForce2 chipset.
[ 0.573304] Scanning for low memory corruption every 60 seconds
[ 0.573471] audit: initializing netlink socket (disabled)
[ 0.573500] type=2000 audit(1262690454.572:1): initialized
[ 0.583237] highmem bounce pool size: 64 pages
[ 0.583247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.586043] VFS: Disk quotas dquot_6.5.2
[ 0.586152] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.587089] fuse init (API version 7.12)
[ 0.587233] msgmni has been set to 1735
[ 0.587632] alg: No test for stdrng (krng)
[ 0.587659] io scheduler noop registered
[ 0.587663] io scheduler anticipatory registered
[ 0.587667] io scheduler deadline registered
[ 0.587745] io scheduler cfq registered (default)
[ 0.587877] pci 0000:01:00.0: Boot video device
[ 0.588034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.588085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.588305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.588312] ACPI: Power Button [PWRF]
[ 0.588403] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.588408] ACPI: Power Button [PWRB]
[ 0.588725] processor LNXCPU:00: registered as cooling_device0
[ 0.588789] processor LNXCPU:01: registered as cooling_device1
[ 0.592568] isapnp: Scanning for PnP cards...
[ 0.709096] Switched to high resolution mode on CPU 1
[ 0.712071] Switched to high resolution mode on CPU 0
[ 0.946614] isapnp: No Plug & Play device found
[ 0.948440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.948559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.948663] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.949070] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.949238] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.950982] brd: module loaded
[ 0.951750] loop: module loaded
[ 0.951889] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.952104] ata_piix 0000:00:1f.1: version 2.13
[ 0.952125] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.952139] alloc irq_desc for 18 on node -1
[ 0.952143] alloc kstat_irqs on node -1
[ 0.952154] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.952233] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.952381] scsi0 : ata_piix
[ 0.952562] scsi1 : ata_piix
[ 0.954859] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.954865] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.956395] Fixed MDIO Bus: probed
[ 0.956455] PPP generic driver version 2.4.2
[ 0.956634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.956671] alloc irq_desc for 23 on node -1
[ 0.956676] alloc kstat_irqs on node -1
[ 0.956688] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.956716] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.956721] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.956803] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.960732] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.960742] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.960767] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fffc00
[ 0.973016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.973157] usb usb1: configuration #1 chosen from 1 choice
[ 0.973207] hub 1-0:1.0: USB hub found
[ 0.973221] hub 1-0:1.0: 8 ports detected
[ 0.973341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.973378] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.973443] alloc irq_desc for 16 on node -1
[ 0.973447] alloc kstat_irqs on node -1
[ 0.973456] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.973469] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.973475] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.973533] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.973569] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 0.973694] usb usb2: configuration #1 chosen from 1 choice
[ 0.973742] hub 2-0:1.0: USB hub found
[ 0.973756] hub 2-0:1.0: 2 ports detected
[ 0.973832] alloc irq_desc for 19 on node -1
[ 0.973836] alloc kstat_irqs on node -1
[ 0.973843] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.973853] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.973859] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.973932] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.973966] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 0.974084] usb usb3: configuration #1 chosen from 1 choice
[ 0.974129] hub 3-0:1.0: USB hub found
[ 0.974139] hub 3-0:1.0: 2 ports detected
[ 0.974219] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.974232] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.974237] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.974287] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.974323] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 0.974460] usb usb4: configuration #1 chosen from 1 choice
[ 0.974504] hub 4-0:1.0: USB hub found
[ 0.974518] hub 4-0:1.0: 2 ports detected
[ 0.974596] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.974606] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.974611] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.974662] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.974687] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 0.974812] usb usb5: configuration #1 chosen from 1 choice
[ 0.974856] hub 5-0:1.0: USB hub found
[ 0.974869] hub 5-0:1.0: 2 ports detected
[ 0.975026] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.975031] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.975455] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.975597] mice: PS/2 mouse device common for all mice
[ 0.975759] rtc_cmos 00:02: RTC can wake from S4
[ 0.975821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.975850] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.976045] device-mapper: uevent: version 1.0.3
[ 0.976245] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.976391] device-mapper: multipath: version 1.1.0 loaded
[ 0.976398] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.976613] EISA: Probing bus 0 at eisa.0
[ 0.976663] EISA: Detected 0 cards.
[ 0.976842] cpuidle: using governor ladder
[ 0.976846] cpuidle: using governor menu
[ 0.977790] TCP cubic registered
[ 0.978000] NET: Registered protocol family 10
[ 0.978798] lo: Disabled Privacy Extensions
[ 0.979430] NET: Registered protocol family 17
[ 0.979463] Bluetooth: L2CAP ver 2.13
[ 0.979466] Bluetooth: L2CAP socket layer initialized
[ 0.979471] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.979473] Bluetooth: SCO socket layer initialized
[ 0.979564] Bluetooth: RFCOMM TTY layer initialized
[ 0.979575] Bluetooth: RFCOMM socket layer initialized
[ 0.979579] Bluetooth: RFCOMM ver 1.11
[ 0.979644] Using IPI No-Shortcut mode
[ 0.979763] PM: Resume from disk failed.
[ 0.979786] registered taskstats version 1
[ 0.979966] Magic number: 10:778:326
[ 0.980095] rtc_cmos 00:02: setting system clock to 2010-01-05 11:20:55 UTC (1262690455)
[ 0.980101] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.980104] EDD information not available.
[ 1.005722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.118078] ata1.00: ATA-7: Maxtor 6L200R0, BAH41G10, max UDMA/133
[ 1.118083] ata1.00: 398297088 sectors, multi 16: LBA48
[ 1.132415] ata2.00: ATAPI: PHILIPS SPD2414T, P1.0, max UDMA/66
[ 1.132462] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-252B, R701, max UDMA/33
[ 1.132496] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 1.134302] ata1.00: configured for UDMA/100
[ 1.134477] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L200R0 BAH4 PQ: 0 ANSI: 5
[ 1.134696] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.134767] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 1.134849] sd 0:0:0:0: [sda] Write Protect is off
[ 1.134854] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.134896] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.135116] sda:
[ 1.148199] ata2.00: configured for UDMA/33
[ 1.153143] sda1 sda2 <
[ 1.164330] ata2.01: configured for UDMA/33
[ 1.166637] scsi 1:0:0:0: CD-ROM PHILIPS SPD2414T P1.0 PQ: 0 ANSI: 5
[ 1.170319] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.170326] Uniform CD-ROM driver Revision: 3.20
[ 1.170485] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.170569] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.172413] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-252B R701 PQ: 0 ANSI: 5
[ 1.173151] sda5 >
[ 1.173876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.176655] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.176795] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.176878] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.176929] Freeing unused kernel memory: 544k freed
[ 1.177837] Write protecting the kernel text: 4592k
[ 1.177983] Write protecting the kernel read-only data: 1836k
[ 1.389839] Linux agpgart interface v0.103
[ 1.427745] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 1.431408] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.471132] Floppy drive(s): fd0 is 1.44M
[ 1.480210] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.492105] FDC 0 is a post-1991 82077
[ 1.511285] alloc irq_desc for 22 on node -1
[ 1.511293] alloc kstat_irqs on node -1
[ 1.511313] skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.511388] skge 1.13 addr 0xf7efc000 irq 22 chip Yukon rev 1
[ 1.513250] skge eth0: addr 00:0c:6e:90:88:66
[ 1.657131] usb 3-2: configuration #1 chosen from 1 choice
[ 1.668892] usbcore: registered new interface driver hiddev
[ 1.686465] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.686664] generic-usb 0003:1BCF:000A.0001: input,hiddev96,hidraw0: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:1d.1-2/input0
[ 1.686697] usbcore: registered new interface driver usbhid
[ 1.686702] usbhid: v2.6:USB HID core driver
[ 2.880907] PM: Starting manual resume from disk
[ 2.880915] PM: Resume from partition 8:5
[ 2.880918] PM: Checking hibernation image.
[ 2.881158] PM: Resume from disk failed.
[ 2.911370] EXT4-fs (sda1): barriers enabled
[ 2.936356] kjournald2 starting: pid 341, dev sda1:8, commit interval 5 seconds
[ 2.936379] EXT4-fs (sda1): delayed allocation enabled
[ 2.936386] EXT4-fs: file extents enabled
[ 2.967417] EXT4-fs: mballoc enabled
[ 2.967447] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.516941] type=1505 audit(1262690458.035:2): operation="profile_load" pid=364 name=/usr/share/gdm/guest-session/Xsession
[ 3.521255] type=1505 audit(1262690458.039:3): operation="profile_load" pid=365 name=/sbin/dhclient3
[ 3.521944] type=1505 audit(1262690458.039:4): operation="profile_load" pid=365 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.522335] type=1505 audit(1262690458.039:5): operation="profile_load" pid=365 name=/usr/lib/connman/scripts/dhclient-script
[ 3.580883] type=1505 audit(1262690458.099:6): operation="profile_load" pid=366 name=/usr/bin/evince
[ 3.592645] type=1505 audit(1262690458.111:7): operation="profile_load" pid=366 name=/usr/bin/evince-previewer
[ 3.599461] type=1505 audit(1262690458.115:8): operation="profile_load" pid=366 name=/usr/bin/evince-thumbnailer
[ 3.638475] type=1505 audit(1262690458.155:9): operation="profile_load" pid=368 name=/usr/lib/cups/backend/cups-pdf
[ 3.639286] type=1505 audit(1262690458.155:10): operation="profile_load" pid=368 name=/usr/sbin/cupsd
[ 13.124637] udev: starting version 147
[ 13.136312] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 13.205914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.208671] intel_rng: FWH not detected
[ 13.215597] lp: driver loaded but no devices found
[ 13.661366] nvidia: module license 'NVIDIA' taints kernel.
[ 13.661386] Disabling lock debugging due to kernel taint
[ 13.843011] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.956651] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.957165] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 14.175549] alloc irq_desc for 17 on node -1
[ 14.175555] alloc kstat_irqs on node -1
[ 14.175571] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.175641] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 14.545024] intel8x0: white list rate for 1043:80f3 is 48000
[ 30.689070] EXT4-fs (sda1): internal journal on sda1:8
[ 30.977032] skge eth0: enabling interface
[ 30.980746] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.210695] __ratelimit: 3 callbacks suppressed
[ 31.210703] type=1505 audit(1262690485.728:12): operation="profile_replace" pid=830 name=/usr/share/gdm/guest-session/Xsession
[ 31.218623] type=1505 audit(1262690485.736:13): operation="profile_replace" pid=833 name=/sbin/dhclient3
[ 31.219388] type=1505 audit(1262690485.736:14): operation="profile_replace" pid=833 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 31.219802] type=1505 audit(1262690485.736:15): operation="profile_replace" pid=833 name=/usr/lib/connman/scripts/dhclient-script
[ 31.229230] type=1505 audit(1262690485.748:16): operation="profile_replace" pid=834 name=/usr/bin/evince
[ 31.243013] type=1505 audit(1262690485.760:17): operation="profile_replace" pid=834 name=/usr/bin/evince-previewer
[ 31.251517] type=1505 audit(1262690485.768:18): operation="profile_replace" pid=834 name=/usr/bin/evince-thumbnailer
[ 31.266825] type=1505 audit(1262690485.784:19): operation="profile_replace" pid=839 name=/usr/lib/cups/backend/cups-pdf
[ 31.267732] type=1505 audit(1262690485.784:20): operation="profile_replace" pid=839 name=/usr/sbin/cupsd
[ 31.272765] type=1505 audit(1262690485.788:21): operation="profile_replace" pid=840 name=/usr/sbin/tcpdump

aflatoxine · Le 05/01/2010, à 16:39

bon je redémarre mon ordi je vais bien voir ce qui se passe

aflatoxine · Le 05/01/2010, à 16:48

après avoir redémarrer mon ordi ça marche correctement c'est un grand mystère et ça n'est pas de la science fiction. La seul chose que j'ai fais lors du problème c'est tout simplement chercher si il avait pas un autre noyau et si je tourner bien sur le bon mais ça n'a pas marcher. en tout cas c'est résolu pour le moment...

merci misaine et hoper pour votre contribution à ce topic

Pacifick_FR42 · Le 05/01/2010, à 17:04

LES QUOTE !! Merci

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 05/01/2010, à 12:35

linux 2.6.31-16-generic-pae

#2 Le 05/01/2010, à 13:52

Re : linux 2.6.31-16-generic-pae

#3 Le 05/01/2010, à 14:09

Re : linux 2.6.31-16-generic-pae

#4 Le 05/01/2010, à 16:35

Re : linux 2.6.31-16-generic-pae

#5 Le 05/01/2010, à 16:36

Re : linux 2.6.31-16-generic-pae

#6 Le 05/01/2010, à 16:38

Re : linux 2.6.31-16-generic-pae

#7 Le 05/01/2010, à 16:39

Re : linux 2.6.31-16-generic-pae

#8 Le 05/01/2010, à 16:48

Re : linux 2.6.31-16-generic-pae

#9 Le 05/01/2010, à 17:04

Re : linux 2.6.31-16-generic-pae

Pied de page des forums