#1 Le 21/01/2010, à 14:00
- malbo
[HOW TO] bootinfoscript
Bootinfoscript permet d'obtenir une aide plus rapide. Il est nécessaire de lancer ce script depuis une session live de Ubuntu (PC démarré sur le liveCD ou sur une clé liveUSB "non-persistant")
1) télécharger le script là (il faut enregistrer le fichier proposé) :
http://sourceforge.net/projects/bootinfoscript/
2) Partir à la recherche de ce fichier enregistré (il se nomme "bootinfoscript-061.tar.gz") avec le gestionnaire de fichier : il est dans le chemin suivant : /home/ubuntu/Téléchargements
ou dans ce chemin si le support live utilisé est en version anglaise : /home/ubuntu/Downloads
Clic droit sur l’icône du fichier bootinfoscript-061.tar.gz > "Extraire ici" (Extract here) ==> après cela, il y a création d'un dossier bootinfoscript-061 qui contient le fichier bootinfoscript
3) Ouvrez un terminal (Applications > Accessoires > Terminal) et coller la ligne qui suit :
sudo bash $HOME/Téléchargements/bootinfoscript-061/bootinfoscript
Puis valider par la touche Entrée
ou bien si le support live est en version anglaise, c'est cette ligne :
sudo bash $HOME/Downloads/bootinfoscript-061/bootinfoscript
Puis valider par la touche Entrée
A partir de là, ça mouline et quelques lignes apparaissent pour indiquer où se trouve le fichier résultat créé (il se nomme RESULTS.txt et se trouve normalement dans le même chemin que bootinfoscript) .
4) Reste à ouvrir ce fichier résultat avec l'éditeur de texte gedit (par un double-clic sur l'icône du fichier résultat. S'il apparaît le message "impossible d'ouvrir le fichier...", sélectionner "Occidental (ISO-8859-15)" au lieu de "Détecter automatiquement" et clic sur le bouton "Réessayer". Cela doit ouvrir le fichier), à copier tout son contenu et à coller le tout dans le post de réponse (pas ici mais dans la discussion en cours) en utilisant les balises code comme expliqué là :
http://doc.ubuntu-fr.org/tutoriel/howto … ne_reponse
Mais oui, cherchez un peu, c'est dans cette partie du lien et le type de balise à utiliser au début et à la fin est clairement précisé :
Le texte inséré entre les balises code sera affiché avec une police type "console". De plus, si la longueur du texte dépasse un certain nombre de lignes, il sera mis dans un cadre avec une barre de défilement sur le côté.
C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambigüe que d'autres polices sur certains caractères.
L'utilisation des balises code permet une lecture plus facile de la discussion. L'aspect est celui de mon résultat ci-dessous.
Voici le résultat que j'ai obtenu sur mon PC Medion depuis une session live CD Ubuntu 9.10 :
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #9 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #7 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System:
Boot files/dirs:
sda6: _________________________________________________________________________
File system: vfat
Boot sector type: -
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 63.
Operating System:
Boot files/dirs:
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda8: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda8 starts
at sector 63.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda8/Wubi: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sda9: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda10: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda11: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda12: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda12 starts
at sector 63.
Operating System: Windows XP
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb5 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb6: _________________________________________________________________________
File system: vfat
Boot sector type: Windows XP: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb7: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 300.1 Go, 300090728448 octets
255 têtes, 63 secteurs/piste, 36483 cylindres, total 586114704 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x4bf64bf5
Partition Boot Start End Size Id System
/dev/sda1 * 63 48,114,674 48,114,612 7 HPFS/NTFS
/dev/sda2 48,114,675 586,083,329 537,968,655 f W95 Ext d (LBA)
/dev/sda5 48,114,738 247,690,169 199,575,432 7 HPFS/NTFS
/dev/sda6 247,690,233 258,180,614 10,490,382 c W95 FAT32 (LBA)
/dev/sda7 258,180,678 268,430,084 10,249,407 83 Linux
/dev/sda8 268,430,148 483,701,084 215,270,937 7 HPFS/NTFS
/dev/sda9 483,701,148 504,183,959 20,482,812 83 Linux
/dev/sda10 504,184,023 516,473,684 12,289,662 82 Linux swap / Solaris
/dev/sda11 516,473,748 538,996,814 22,523,067 83 Linux
/dev/sda12 538,996,878 586,083,329 47,086,452 7 HPFS/NTFS
Drive: sdb ___________________ _____________________________________________________
Disque /dev/sdb: 163.9 Go, 163928604672 octets
255 têtes, 63 secteurs/piste, 19929 cylindres, total 320173056 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0xe09fe09f
Partition Boot Start End Size Id System
/dev/sdb1 * 63 57,753,674 57,753,612 83 Linux
/dev/sdb2 57,753,675 320,159,384 262,405,710 f W95 Ext d (LBA)
/dev/sdb5 57,753,738 297,314,954 239,561,217 7 HPFS/NTFS
/dev/sdb6 297,315,018 309,909,914 12,594,897 b W95 FAT32
/dev/sdb7 309,909,978 320,159,384 10,249,407 83 Linux
blkid -c /dev/null: ____________________________________________________________
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="5a02f28a-bdb0-4da5-8e7d-727331638b5e" TYPE="ext4"
/dev/sda10: UUID="35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4" TYPE="swap"
/dev/sda11: UUID="6170c787-791e-4b12-952e-7c9b98ceda38" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda12: UUID="0620A81E20A816A9" TYPE="ntfs"
/dev/sda1: UUID="01C67BDEBADC6540" LABEL="MAX300_VOL1" TYPE="ntfs"
/dev/sda5: UUID="98ECE41BECE3F204" LABEL="MAX300_VOL2" TYPE="ntfs"
/dev/sda6: LABEL="MAX300_VOL3" UUID="0000-0DFB" TYPE="vfat"
/dev/sda7: UUID="e25f8c9f-09c9-43e7-8632-c0ed53cf1b13" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda8: UUID="5AC89690C8966A51" LABEL="MAX300_VOL5" TYPE="ntfs"
/dev/sda9: UUID="ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1" TYPE="ext4"
/dev/sdb1: UUID="b431fcbc-3801-49a5-b02f-84a5409f293a" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb5: UUID="1460E4C060E4A9A6" LABEL="MAX160_VOL2" TYPE="ntfs"
/dev/sdb6: LABEL="MAX160_VOL3" UUID="24E4-D494" TYPE="vfat"
/dev/sdb7: UUID="1c721c8c-28df-47f8-b007-0605f08acf34" TYPE="ext4"
=============================== "mount" output: ===============================
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(9)\WINDOWS="Montage video avec XP" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /fastdetect /NoExecute=OptIn
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
C:\wubildr.mbr = "Ubuntu"
======================== sda8/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
insmod ntfs
set root=(hd0,8)
search --no-floppy --fs-uuid --set 5ac89690c8966a51
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
insmod ntfs
set root=(hd0,8)
search --no-floppy --fs-uuid --set 5ac89690c8966a51
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
insmod ntfs
set root=(hd0,8)
search --no-floppy --fs-uuid --set 5ac89690c8966a51
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
insmod ntfs
set root=(hd0,8)
search --no-floppy --fs-uuid --set 5ac89690c8966a51
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 01c67bdebadc6540
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda9)" {
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda9)" {
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda9)" {
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda9)" {
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-15-generic (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-15-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode) (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-15-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-15-generic
}
menuentry "Ubuntu 9.04, memtest86+ (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/memtest86+.bin
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sda8/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
================= sda8/Wubi: Location of files loaded by Grub: =================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-16-generic
.0GB: boot/initrd.img-2.6.31-17-generic
.0GB: boot/vmlinuz-2.6.31-16-generic
.0GB: boot/vmlinuz-2.6.31-17-generic
.0GB: initrd.img
.0GB: initrd.img.old
.0GB: vmlinuz
.0GB: vmlinuz.old
=========================== sda9/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 01c67bdebadc6540
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu 9.04, kernel 2.6.28-17-generic (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode) (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, memtest86+ (on /dev/sdb7)" {
insmod ext2
set root=(hd1,7)
search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
linux /boot/memtest86+.bin
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda9/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sda9 :
UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda10 :
UUID=35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda8 /media/MAX300_VOL5 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sda9: Location of files loaded by Grub: ===================
247.6GB: boot/grub/core.img
247.6GB: boot/grub/grub.cfg
247.6GB: boot/initrd.img-2.6.31-16-generic
247.6GB: boot/initrd.img-2.6.31-17-generic
247.6GB: boot/vmlinuz-2.6.31-16-generic
247.6GB: boot/vmlinuz-2.6.31-17-generic
247.6GB: initrd.img
247.6GB: initrd.img.old
247.6GB: vmlinuz
247.6GB: vmlinuz.old
=========================== sdb7/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 6
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=1c721c8c-28df-47f8-b007-0605f08acf34
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=2
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-17-generic
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, memtest86+
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows NT/2000/XP (loader)
root (hd1,0)
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
# Ubuntu 9.04 installé sur /dev/sda9
title Ubuntu 9.04 en ext3
root (hd0,8)
chainloader +1
boot
========================== sdb7/boot/grub/grub.conf: ==========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=1c721c8c-28df-47f8-b007-0605f08acf34
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 1c721c8c-28df-47f8-b007-0605f08acf34
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows NT/2000/XP (loader)
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title Ubuntu 9.04, kernel 2.6.28-13-generic (on /dev/sda9)
root (hd0,8)
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro quiet splash
initrd /boot/initrd.img-2.6.28-13-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title Ubuntu 9.04, kernel 2.6.28-13-generic (recovery mode) (on /dev/sda9)
root (hd0,8)
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro single
initrd /boot/initrd.img-2.6.28-13-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda9)
root (hd0,8)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda9)
root (hd0,8)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro single
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title Ubuntu 9.04, memtest86+ (on /dev/sda9)
root (hd0,8)
kernel /boot/memtest86+.bin
savedefault
boot
=============================== sdb7/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sdb7 :
UUID=1c721c8c-28df-47f8-b007-0605f08acf34 / ext4 relatime,errors=remount-ro 0 1
# Entry for /dev/sda10 :
UUID=35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sda8 /media/MAX300_VOL5 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda12 /media/sda12 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sdb7: Location of files loaded by Grub: ===================
158.6GB: boot/grub/grub.conf
158.6GB: boot/grub/menu.lst
158.6GB: boot/grub/stage2
158.6GB: boot/initrd.img-2.6.28-11-generic
158.6GB: boot/initrd.img-2.6.28-13-generic
158.6GB: boot/initrd.img-2.6.28-14-generic
158.6GB: boot/initrd.img-2.6.28-15-generic
158.6GB: boot/initrd.img-2.6.28-16-generic
158.6GB: boot/initrd.img-2.6.28-17-generic
158.6GB: boot/vmlinuz-2.6.28-11-generic
158.6GB: boot/vmlinuz-2.6.28-13-generic
158.6GB: boot/vmlinuz-2.6.28-14-generic
158.6GB: boot/vmlinuz-2.6.28-15-generic
158.6GB: boot/vmlinuz-2.6.28-16-generic
158.6GB: boot/vmlinuz-2.6.28-17-generic
158.6GB: initrd.img
158.6GB: initrd.img.old
158.6GB: vmlinuz
158.6GB: vmlinuz.old
ATTENTION : je répète qu'il ne faut pas poster ici votre résultat obtenu avec le script bootinfoscript : ce résultat, il faut le poster dans la discussion où vous avez posté récemment pour demander de l'aide pour votre problème. Moi je ne répondrai pas ici et j'espère que personne ne vous répondra non plus
Mise à jour : le 19 mai 2011 après sortie de la version 0.60 du bootinfoscript, avec suppression des indications dans le cas d'une session sur Ubuntu installé sur disque dur.
Mise à jour le 5 avril 2012 après sortie de la version 0.61 du bootinfoscript
Dernière modification par malbo (Le 05/04/2012, à 07:31)
Hors ligne
#2 Le 22/01/2010, à 10:12
- malbo
Re : [HOW TO] bootinfoscript
Et le résultat obtenu sur mon PC Acer depuis une session live CD Ubuntu 9.10 :
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub.
=> Grub 1.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #5 for /boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /Boot/BCD /ntldr /NTDETECT.COM /wubildr.mbr
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
sda3: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda6: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda4: _________________________________________________________________________
File system: ext4
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sda4 and
looks at sector 863321864 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #4 for
/boot/grub/menu.lst.
Operating System: Mandriva Linux release 2010.0
(Official) for x86_64 Kernel 2.6.31.5-desktop-1mnb on
a 4-processor x86_64 /
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr
sdb3: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb7: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb8: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sdb8/Wubi: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdb9: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00037dc9
Partition Boot Start End Size Id System
/dev/sda1 * 32,130 62,541,044 62,508,915 7 HPFS/NTFS
/dev/sda2 62,541,045 205,166,114 142,625,070 7 HPFS/NTFS
/dev/sda3 205,166,115 855,557,639 650,391,525 5 Extended
/dev/sda5 205,166,178 720,595,574 515,429,397 7 HPFS/NTFS
/dev/sda6 720,595,638 741,094,514 20,498,877 83 Linux
/dev/sda7 741,094,578 751,456,439 10,361,862 82 Linux swap / Solaris
/dev/sda8 751,456,503 855,557,639 104,101,137 83 Linux
/dev/sda4 855,557,640 976,768,064 121,210,425 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9e4f6a8
Partition Boot Start End Size Id System
/dev/sdb1 * 63 63,215,774 63,215,712 7 HPFS/NTFS
/dev/sdb2 63,215,775 83,698,649 20,482,875 7 HPFS/NTFS
/dev/sdb3 83,698,650 95,988,374 12,289,725 82 Linux swap / Solaris
/dev/sdb4 95,988,375 1,953,520,064 1,857,531,690 5 Extended
/dev/sdb5 95,988,438 126,704,654 30,716,217 83 Linux
/dev/sdb6 126,704,718 249,585,839 122,881,122 83 Linux
/dev/sdb7 249,585,903 270,550,664 20,964,762 7 HPFS/NTFS
/dev/sdb8 270,550,728 1,870,029,247 1,599,478,520 7 HPFS/NTFS
/dev/sdb9 1,870,030,323 1,953,520,064 83,489,742 7 HPFS/NTFS
blkid -c /dev/null: ____________________________________________________________
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="764b3c1b-970e-44b8-b4c5-281399488294" TYPE="ext4"
/dev/sda1: UUID="5AF42CCBF42CAB69" LABEL="XP_PRO" TYPE="ntfs"
/dev/sda2: UUID="5B1A1BA60DEDD299" LABEL="seven sur hitachi" TYPE="ntfs"
/dev/sda4: LABEL="mandriva" UUID="c0dce78e-d94d-4fbc-90fd-7b5046297be0" TYPE="ext4"
/dev/sda5: UUID="128CBF065FE0D822" LABEL="DATA_XP" TYPE="ntfs"
/dev/sda6: UUID="97c19c6f-3fc8-4d00-a67d-111915059b4c" TYPE="ext4"
/dev/sda7: UUID="9e81fbe1-7d4e-2d93-4344-80a93a548991" TYPE="swap"
/dev/sda8: UUID="89346a36-0511-4685-9c5e-46ae59401e1a" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb1: UUID="66E4D82BE4D7FB6F" LABEL="VISTA" TYPE="ntfs"
/dev/sdb2: UUID="6EB097EFB097BC51" LABEL="XP LEGER" TYPE="ntfs"
/dev/sdb3: UUID="852820a7-1551-4cff-9aeb-a843085b7815" TYPE="swap"
/dev/sdb5: UUID="c27e7454-6747-448a-9a7b-97352f4c1676" TYPE="ext4"
/dev/sdb6: UUID="1952eb9c-ef8f-4585-b65f-43a8822b8daa" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb7: UUID="417516424CE2345F" TYPE="ntfs"
/dev/sdb8: UUID="6EFDDDA001845237" LABEL="StockageNTFS" TYPE="ntfs"
/dev/sdb9: UUID="38852FB86E150005" LABEL="seven" TYPE="ntfs"
=============================== "mount" output: ===============================
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=7
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT
multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect
c:\CMDCONS\BOOTSECT.DAT="Console de rcupration Microsoft Windows XP" /CMDCONS
C:\wubildr.mbr = "Ubuntu"
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "mandriva par chainload vers sda4" {
insmod ext2
set root=(hd0,4)
chainloader +1
}
### END /etc/grub.d/40_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sda6 :
UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sda6: Location of files loaded by Grub: ===================
368.9GB: boot/grub/core.img
368.9GB: boot/grub/grub.cfg
368.9GB: boot/initrd.img-2.6.31-16-generic
368.9GB: boot/initrd.img-2.6.31-17-generic
368.9GB: boot/vmlinuz-2.6.31-16-generic
368.9GB: boot/vmlinuz-2.6.31-17-generic
368.9GB: initrd.img
368.9GB: initrd.img.old
368.9GB: vmlinuz
368.9GB: vmlinuz.old
=========================== sda4/boot/grub/menu.lst: ===========================
timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,3)/boot/gfxmenu
default 0
title linux
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
title linux-nonfb
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815
initrd (hd0,3)/boot/initrd.img
title failsafe
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
title windows
root (hd0,0)
makeactive
chainloader +1
title windows1
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1
title desktop 2.6.31.5-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
title desktop 2.6.31.6-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
=============================== sda4/etc/fstab: ===============================
# Entry for /dev/sda4 :
LABEL=mandriva / ext4 relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# Entry for /dev/sda1 :
UUID=5AF42CCBF42CAB69 /media/win_c ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb1 :
UUID=66E4D82BE4D7FB6F /media/win_c2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda5 :
UUID=128CBF065FE0D822 /media/win_d ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb7 :
UUID=417516424CE2345F /media/win_d2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda2 :
UUID=5B1A1BA60DEDD299 /media/win_e ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb8 :
UUID=6EFDDDA001845237 /media/win_e2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb9 :
UUID=38852FB86E150005 /media/win_f ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb2 :
UUID=6EB097EFB097BC51 /media/win_g ntfs-3g defaults,umask=000 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 swap swap defaults 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 swap swap defaults 0 0
=================== sda4: Location of files loaded by Grub: ===================
438.0GB: boot/grub/menu.lst
438.0GB: boot/grub/stage2
438.0GB: boot/initrd-2.6.31.5-desktop-1mnb.img
438.0GB: boot/initrd-2.6.31.6-desktop-1mnb.img
438.0GB: boot/initrd-desktop.img
438.0GB: boot/initrd.img
438.0GB: boot/vmlinuz
438.0GB: boot/vmlinuz-2.6.31.5-desktop-1mnb
438.0GB: boot/vmlinuz-2.6.31.6-desktop-1mnb
438.0GB: boot/vmlinuz-desktop
================================ sdb2/boot.ini: ================================
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect
c:\CMDCONS\BOOTSECT.DAT="Console de rcupration Microsoft Windows XP" /CMDCONS
C:\wubildr.mbr = "Ubuntu"
=========================== sdb5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "2.6.27-desktop586rc8-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27-desktop586-0.rc8.2mnb BOOT_IMAGE=2.6.27-desktop586rc8-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27-desktop586-0.rc8.2mnb.img
}
menuentry "desktop586 2.6.27.4-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.4-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.4-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.4-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.5-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.5-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.5-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.5-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.7-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.7-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.7-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.7-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.19-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.19-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.19-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.19-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.21-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.21-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.21-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.21-desktop586-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sdb5 :
UUID=c27e7454-6747-448a-9a7b-97352f4c1676 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/ACER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sdb5: Location of files loaded by Grub: ===================
49.1GB: boot/grub/core.img
49.1GB: boot/grub/grub.cfg
49.1GB: boot/initrd.img-2.6.31-15-generic
49.1GB: boot/initrd.img-2.6.31-16-generic
49.1GB: boot/initrd.img-2.6.31-17-generic
49.1GB: boot/vmlinuz-2.6.31-15-generic
49.1GB: boot/vmlinuz-2.6.31-16-generic
49.1GB: boot/vmlinuz-2.6.31-17-generic
49.1GB: initrd.img
49.1GB: initrd.img.old
49.1GB: vmlinuz
49.1GB: vmlinuz.old
======================== sdb8/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-15-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-15-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "2.6.27-desktop586rc8-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27-desktop586-0.rc8.2mnb BOOT_IMAGE=2.6.27-desktop586rc8-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27-desktop586-0.rc8.2mnb.img
}
menuentry "desktop586 2.6.27.4-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.4-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.4-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.4-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.5-2mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.5-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.5-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.5-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.7-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.7-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.7-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.7-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.19-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.19-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.19-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.19-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.21-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
linux /boot/vmlinuz-2.6.27.21-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.21-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.27.21-desktop586-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sdb8/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
================= sdb8/Wubi: Location of files loaded by Grub: =================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-14-generic
.0GB: boot/initrd.img-2.6.31-15-generic
.0GB: boot/initrd.img-2.6.31-16-generic
.0GB: boot/initrd.img-2.6.31-17-generic
.0GB: boot/vmlinuz-2.6.31-14-generic
.0GB: boot/vmlinuz-2.6.31-15-generic
.0GB: boot/vmlinuz-2.6.31-16-generic
.0GB: boot/vmlinuz-2.6.31-17-generic
.0GB: initrd.img
.0GB: initrd.img.old
.0GB: vmlinuz
.0GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf
Dernière modification par malbo (Le 22/01/2010, à 10:29)
Hors ligne
#3 Le 25/01/2010, à 12:18
- superwanus
Re : [HOW TO] bootinfoscript
bon,bah voila ce que ça donne pour moi...
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 8.10
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x000a5f70
Partition Boot Start End Size Id System
/dev/sda1 * 63 154,272,194 154,272,132 83 Linux
/dev/sda2 154,272,195 312,576,704 158,304,510 5 Extended
/dev/sda5 305,395,713 312,576,704 7,180,992 82 Linux swap / Solaris
/dev/sda6 154,272,321 299,146,364 144,874,044 83 Linux
/dev/sda7 299,146,428 305,395,649 6,249,222 82 Linux swap / Solaris
Drive: sdb ___________________ _____________________________________________________
Disque /dev/sdb: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x10474f41
Partition Boot Start End Size Id System
/dev/sdb1 * 63 306,648,719 306,648,657 83 Linux
/dev/sdb2 306,648,720 312,576,704 5,927,985 5 Extended
/dev/sdb5 306,648,783 312,576,704 5,927,922 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="432c1620-42bb-492e-ac24-417bca179434" TYPE="ext3"
/dev/sda5: UUID="393e15cc-9896-413a-8707-30ceecff3341" TYPE="swap"
/dev/sda6: UUID="ffd9211b-6021-4f90-9428-18ba6625c507" TYPE="ext4"
/dev/sda7: UUID="067429a5-6ba2-49fb-a718-60b023b12d26" TYPE="swap"
/dev/sdb1: UUID="0db81fe1-984b-4429-b202-b17a3f8c35c0" TYPE="ext3"
/dev/sdb5: UUID="72af050b-5dd4-47c1-932b-4b4b03b2a29a" TYPE="swap"
=============================== "mount" output: ===============================
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /media/432c1620-42bb-492e-ac24-417bca179434 type ext3 (rw,nosuid,nodev,uhelper=devkit)
/dev/sda6 on /media/ffd9211b-6021-4f90-9428-18ba6625c507 type ext4 (rw,nosuid,nodev,uhelper=devkit)
/dev/sdb1 on /media/0db81fe1-984b-4429-b202-b17a3f8c35c0 type ext3 (rw,nosuid,nodev,uhelper=devkit)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=432c1620-42bb-492e-ac24-417bca179434
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid 432c1620-42bb-492e-ac24-417bca179434
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid 432c1620-42bb-492e-ac24-417bca179434
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro single
initrd /boot/initrd.img-2.6.27-7-generic
title Ubuntu 8.10, memtest86+
uuid 432c1620-42bb-492e-ac24-417bca179434
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1
UUID=432c1620-42bb-492e-ac24-417bca179434 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda5
UUID=393e15cc-9896-413a-8707-30ceecff3341 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: boot/grub/menu.lst
.0GB: boot/grub/stage2
.0GB: boot/initrd.img-2.6.27-7-generic
.0GB: boot/vmlinuz-2.6.27-7-generic
.0GB: initrd.img
.0GB: vmlinuz
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=ffd9211b-6021-4f90-9428-18ba6625c507 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=ffd9211b-6021-4f90-9428-18ba6625c507 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda1)" {
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
linux /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
}
menuentry "Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda1)" {
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
linux /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro single
initrd /boot/initrd.img-2.6.27-7-generic
}
menuentry "Ubuntu 8.10, memtest86+ (on /dev/sda1)" {
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
linux /boot/memtest86+.bin
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda6 during installation
UUID=ffd9211b-6021-4f90-9428-18ba6625c507 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=067429a5-6ba2-49fb-a718-60b023b12d26 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda6: Location of files loaded by Grub: ===================
78.9GB: boot/grub/core.img
78.9GB: boot/grub/grub.cfg
78.9GB: boot/initrd.img-2.6.31-14-generic
78.9GB: boot/vmlinuz-2.6.31-14-generic
78.9GB: initrd.img
78.9GB: vmlinuz
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=0db81fe1-984b-4429-b202-b17a3f8c35c0
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-17-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-14-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-14-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-14-generic
title Ubuntu 9.04, kernel 2.6.28-13-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-13-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-13-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-13-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=72af050b-5dd4-47c1-932b-4b4b03b2a29a none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
.0GB: boot/grub/menu.lst
.0GB: boot/grub/stage2
.0GB: boot/initrd.img-2.6.28-11-generic
.0GB: boot/initrd.img-2.6.28-13-generic
.0GB: boot/initrd.img-2.6.28-14-generic
.0GB: boot/initrd.img-2.6.28-15-generic
.0GB: boot/initrd.img-2.6.28-16-generic
.0GB: boot/initrd.img-2.6.28-17-generic
.0GB: boot/vmlinuz-2.6.28-11-generic
.0GB: boot/vmlinuz-2.6.28-13-generic
.0GB: boot/vmlinuz-2.6.28-14-generic
.0GB: boot/vmlinuz-2.6.28-15-generic
.0GB: boot/vmlinuz-2.6.28-16-generic
.0GB: boot/vmlinuz-2.6.28-17-generic
.0GB: initrd.img
.0GB: initrd.img.old
.0GB: vmlinuz
.0GB: vmlinuz.old
Dernière modification par superwanus (Le 25/01/2010, à 16:17)
Hors ligne
#4 Le 25/01/2010, à 12:28
- Qid
Re : [HOW TO] bootinfoscript
wahou ... ça semble surpuissant comme truc !
@ superwanus > **headshot** :mad::mad::mad::mad::mad::mad:
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#5 Le 25/01/2010, à 12:49
- malbo
Re : [HOW TO] bootinfoscript
Il y a peut-être des vices cachés dans ce script mais c'est vrai qu'au lieu de tartiner pendant des posts et des posts dans une discussion fatiguante, aussi bien pour nous qui voulons apporter de l'aide que pour le novice (fais-ceci, tape ça, essaie cette commande...).
Là au moins, on lance une belle fusée éclairante sur le champ de bataille...
Hors ligne
#6 Le 25/01/2010, à 12:56
- Qid
Re : [HOW TO] bootinfoscript
on lance une belle fusée éclairante sur le champ de bataille...
trop d'info tue l'info quand meme surtout quand on est face
à des C****ds qui savent pas utiliser les balises du forum ...
bon par contre avec tes histoires de vis caché tu fais peur un peu toi
hey les gens ? vous croyez que sur mac il passe ce script ?
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#7 Le 25/01/2010, à 13:19
- malbo
Re : [HOW TO] bootinfoscript
Quand j'écris qu'il y a peut-être des vices cachées, ce n'est pas pour te faire peur, c'est seulement que je découvre moi aussi se machin et, comme je suis craintif de nature, je me dis que c'est un peu" trop beau pour être vrai" parce qu'on a vraiment l'impression d'avoir tous les éléments en main avec le résultat du script.
Hors ligne
#8 Le 25/01/2010, à 13:25
- Qid
Re : [HOW TO] bootinfoscript
on a vraiment l'impression d'avoir tous les éléments en main avec le résultat du script.
moi j'aurais bien aimé en plus un remix de dmidecode et des differant ls (usb/pci/mod)
mais bon c'est vrais que la c'est deja pas mal
quant à ta crainte ... bouarf ...
m'est avis que si il est effectivement utilisé par les anglais
c'est qu'il est suffisemment de confiance non ?
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#9 Le 25/01/2010, à 13:28
- peterp@n
Re : [HOW TO] bootinfoscript
Oua, ça à l'air bien puissant ce script.
Et je rejoins Qid sur 2 points :
1 > superwanus > utilises les balises code, t'imagines si tout le monde fait comme toi
2 > Trop d'infos peut tuer l'info. Il faudrait pouvoir choisir les infos à afficher en fonction du problème qu'on rencontre.
Je vais essayer ça en tout cas.
Ubuntu 14.04 64bits, Raspbian “wheezy”, Tango Studio sauce debian
Assistance - Développement - Formations FreeCAD (logiciel 3d)
Hors ligne
#10 Le 25/01/2010, à 16:21
- superwanus
Re : [HOW TO] bootinfoscript
"quand on est face
à des C****ds qui savent pas utiliser les balises du forum ..."
bin ça y est, c'est fait... merci pour l'aide à un débutant qui ne savait effectivement pas, il y a une heure, utiliser les balises. Je sais pas si le mieux, pour aider un débutant, c'est de commencer par les insultes (même légèrement déguisées).
Hors ligne
#11 Le 25/01/2010, à 16:38
- malbo
Re : [HOW TO] bootinfoscript
Qid,
Au cachot. Tu pourras ressortir pour le goûter si tu es bien gentil.
Hors ligne
#12 Le 25/01/2010, à 16:41
- Qid
Re : [HOW TO] bootinfoscript
"quand on est face
à des C****ds qui savent pas utiliser les balises du forum ..."bin ça y est, c'est fait... merci pour l'aide à un débutant qui ne savait effectivement pas, il y a une heure, utiliser les balises. Je sais pas si le mieux, pour aider un débutant, c'est de commencer par les insultes (même légèrement déguisées).
c'est ce qui s'appel avoir pris pour tout le monde : t'es malheueusement loin d'etre le seul
et en faite maintenant que tu le dis c'est ptetre meme pas de ta faute :
si tu utilise la réponse rapide les balise n'y sont pas proposé : c'est balot
mais bon avoue que c'est quand meme moi l'enfin comme ça
@ malbo > et si je veux pas
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#13 Le 25/01/2010, à 16:45
- RegisBurin
Re : [HOW TO] bootinfoscript
@superwanus: Ne te braque pas, Quid est toujours comme ça... Il ne sait pas répondre à un néophyte sans lui dire qu'il est naze.
Mais bon, Quid sait, Quid n'a jamais été un noob, Quid n'a jamais eu besoin d'aide... en fait, je crois que Quid est le pseudo-forum.ubuntu-fr de Chuck Norris...
dsl tous pour le HS
Dernière modification par RegisBurin (Le 25/01/2010, à 16:47)
Config (M-AUDIO Delta44/Wacom CTH661-Phone ZTE OpenC-FFOS2.1) | BabyBox[WIP]
Moi sur le web / Moi, IRL mais sur le web / Ma maison sur le web
Hors ligne
#14 Le 25/01/2010, à 16:56
- Qid
Re : [HOW TO] bootinfoscript
Mais bon, Quid sait, Quid n'a jamais été un noob, Quid n'a jamais eu besoin d'aide... en fait, je crois que Quid est le pseudo-forum.ubuntu-fr de Chuck Norris...
si tu savais ... ... meme qu'a l'époque
je m'etait fait inciendié par les fedoraïstes
parce que je posais trop de question
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#15 Le 25/01/2010, à 16:56
- superwanus
Re : [HOW TO] bootinfoscript
je me braque pas, c'est que je suis légèrement énervé pas mon pc... :mad::mad::mad:
mais je ne désespère pas!:/
Hors ligne
#16 Le 26/01/2010, à 17:20
- Qid
Re : [HOW TO] bootinfoscript
eh les gens ?
j'ia un gag à vous soumettre apres l'essai du script :
=> Windows is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb[...]
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 120.0 Go, 120034123776 octets
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x3a87195bPartition Boot Start End Size Id System
/dev/sda1 2,048 3,074,047 3,072,000 27 Hidden HPFS/NTFS
/dev/sda2 * 3,074,048 119,810,047 116,736,000 7 HPFS/NTFS
/dev/sda3 119,810,048 234,438,655 114,628,608 7 HPFS/NTFSDrive: sdb ___________________ _____________________________________________________
Disque /dev/sdb: 82.0 Go, 81964302336 octets
255 têtes, 63 secteurs/piste, 9964 cylindres, total 160086528 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0xf791f791Partition Boot Start End Size Id System
/dev/sdb1 * 63 156,248,189 156,248,127 83 Linux
/dev/sdb2 156,248,190 160,071,659 3,823,470 82 Linux swap / Solaris
bon alors moi je veux bien ... mais ou il a peché que le MBR de sdb etait du windows ?
bon j'avoue c'est un disque dur que j'ai piqué d'une encienne tour sous windows
mais comment ça se fait que le MBR de windows est toujours en vie
et ça suppose quoi exactement ? (j'ai aucun souci à déclarer)
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#17 Le 26/01/2010, à 18:08
- malbo
Re : [HOW TO] bootinfoscript
hé Qid,
Regarde un peu ce que j'ai mis en bas du post #1 de ce fil (Attention, etc..) parce que je n'ai pas envie que tout le monde vienne coller son résultat dans ce fil. Tu vas me dire que tu n'es pas tout le monde... mais si tu acceptais de créer une nouvelle discussion sur ton cas personnel, ce serait gentil (c'est vrai que tu n'es pas gentil non plus).
Hors ligne
#18 Le 26/01/2010, à 18:16
- Qid
Re : [HOW TO] bootinfoscript
hé Qid,
Regarde un peu ce que j'ai mis en bas du post #1 de ce fil (Attention, etc..) parce que je n'ai pas envie que tout le monde vienne coller son résultat dans ce fil.
je comprends bien mais je comptais pas faire tout un debat de mon cas en faite :
ça m'a juste interpelé mais je vois pas l'utilité de créer un fils pour autant
en plus je trouve pas que mon affaire soit réellement hors sujet :
tu présente le script et moi je cherche à le comprendre
enfin bon ok si t'a (ou ne veux) pas de réponse à me donner je t'en voudrais pas
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#19 Le 26/01/2010, à 18:26
- malbo
Re : [HOW TO] bootinfoscript
Qid,
Tu me fais peur là : ce ton modéré, cette douceur, ça ne me dit rien de bon...
Hors ligne
#20 Le 16/02/2010, à 12:28
- malbo
Re : [HOW TO] bootinfoscript
Le même PC ACER que plus haut (post #2) mais pour pouvoir accéder direct à Win 7 qui est sur sda2, j'ai mis le flag sur sda2 (au lieu de sda1), réparé le boot de Win7 pour qu'il installe bootmgr sur sda2, puis réinstallé grub dans le MBR de sda (update-grub non fonctionnel depuis le live CD pour la reconnaissance des partitions windows), depuis Ubuntu démarré sur sda6, fais update-grub pour reconnaissance complète.
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #5 for /boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr /wubildr
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda6: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda4: _________________________________________________________________________
File system: ext4
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sda4 and
looks at sector 863321864 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #4 for
/boot/grub/menu.lst.
Operating System: Mandriva Linux release 2010.0
(Official) for x86_64 Kernel 2.6.31.6-desktop-1mnb on
a 4-processor x86_64 /
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr.mbr /wubildr
sdb2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb3: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb7: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb8: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sdb8/Wubi: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdb9: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00037dc9
Partition Boot Start End Size Id System
/dev/sda1 32,130 62,541,044 62,508,915 7 HPFS/NTFS
/dev/sda2 * 62,541,045 205,166,114 142,625,070 7 HPFS/NTFS
/dev/sda3 205,166,115 855,557,639 650,391,525 5 Extended
/dev/sda5 205,166,178 720,595,574 515,429,397 7 HPFS/NTFS
/dev/sda6 720,595,638 741,094,514 20,498,877 83 Linux
/dev/sda7 741,094,578 751,456,439 10,361,862 82 Linux swap / Solaris
/dev/sda8 751,456,503 855,557,639 104,101,137 83 Linux
/dev/sda4 855,557,640 976,768,064 121,210,425 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9e4f6a8
Partition Boot Start End Size Id System
/dev/sdb1 * 63 63,215,774 63,215,712 7 HPFS/NTFS
/dev/sdb2 63,215,775 83,698,649 20,482,875 7 HPFS/NTFS
/dev/sdb3 83,698,650 95,988,374 12,289,725 82 Linux swap / Solaris
/dev/sdb4 95,988,375 1,953,520,064 1,857,531,690 5 Extended
/dev/sdb5 95,988,438 126,704,654 30,716,217 83 Linux
/dev/sdb6 126,704,718 249,585,839 122,881,122 83 Linux
/dev/sdb7 249,585,903 270,550,664 20,964,762 7 HPFS/NTFS
/dev/sdb8 270,550,728 1,870,029,247 1,599,478,520 7 HPFS/NTFS
/dev/sdb9 1,870,030,323 1,953,520,064 83,489,742 7 HPFS/NTFS
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 764b3c1b-970e-44b8-b4c5-281399488294 ext4
/dev/sda1 5AF42CCBF42CAB69 ntfs XP_PRO
/dev/sda2 5B1A1BA60DEDD299 ntfs seven sur hitachi
/dev/sda4 c0dce78e-d94d-4fbc-90fd-7b5046297be0 ext4 mandriva
/dev/sda5 128CBF065FE0D822 ntfs DATA_XP
/dev/sda6 97c19c6f-3fc8-4d00-a67d-111915059b4c ext4
/dev/sda7 9e81fbe1-7d4e-2d93-4344-80a93a548991 swap
/dev/sda8 89346a36-0511-4685-9c5e-46ae59401e1a ext3
/dev/sdb1 66E4D82BE4D7FB6F ntfs VISTA
/dev/sdb2 6EB097EFB097BC51 ntfs XP LEGER
/dev/sdb3 852820a7-1551-4cff-9aeb-a843085b7815 swap
/dev/sdb5 c27e7454-6747-448a-9a7b-97352f4c1676 ext4
/dev/sdb6 1952eb9c-ef8f-4585-b65f-43a8822b8daa ext3
/dev/sdb7 417516424CE2345F ntfs
/dev/sdb8 6EFDDDA001845237 ntfs StockageNTFS
/dev/sdb9 38852FB86E150005 ntfs seven
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (rw)
/dev/loop0 /rofs squashfs (rw)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=7
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT
multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect
c:\CMDCONS\BOOTSECT.DAT="Console de rcupration Microsoft Windows XP" /CMDCONS
C:\wubildr.mbr = "Ubuntu"
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set 5b1a1ba60dedd299
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "mandriva par chainload vers sda4" {
insmod ext2
set root=(hd0,4)
chainloader +1
}
### END /etc/grub.d/40_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sda6 :
UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sda6: Location of files loaded by Grub: ===================
372.1GB: boot/grub/core.img
374.8GB: boot/grub/grub.cfg
372.8GB: boot/initrd.img-2.6.31-17-generic
374.5GB: boot/initrd.img-2.6.31-19-generic
372.6GB: boot/vmlinuz-2.6.31-17-generic
373.9GB: boot/vmlinuz-2.6.31-19-generic
374.5GB: initrd.img
372.8GB: initrd.img.old
373.9GB: vmlinuz
372.6GB: vmlinuz.old
=========================== sda4/boot/grub/menu.lst: ===========================
timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,3)/boot/gfxmenu
default 0
title linux
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
title linux-nonfb
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
initrd (hd0,3)/boot/initrd.img
title failsafe
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
title windows
root (hd0,0)
makeactive
chainloader +1
title windows1
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1
title desktop 2.6.31.5-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
title desktop 2.6.31.6-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
=============================== sda4/etc/fstab: ===============================
# Entry for /dev/sda4 :
LABEL=mandriva / ext4 relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# Entry for /dev/sda1 :
UUID=5AF42CCBF42CAB69 /media/win_c ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb1 :
UUID=66E4D82BE4D7FB6F /media/win_c2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda5 :
UUID=128CBF065FE0D822 /media/win_d ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb7 :
UUID=417516424CE2345F /media/win_d2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda2 :
UUID=5B1A1BA60DEDD299 /media/win_e ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb8 :
UUID=6EFDDDA001845237 /media/win_e2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb9 :
UUID=38852FB86E150005 /media/win_f ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb2 :
UUID=6EB097EFB097BC51 /media/win_g ntfs-3g defaults,umask=000 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 swap swap defaults 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 swap swap defaults 0 0
=================== sda4: Location of files loaded by Grub: ===================
438.4GB: boot/grub/menu.lst
442.0GB: boot/grub/stage2
442.1GB: boot/initrd-2.6.31.5-desktop-1mnb.img
444.0GB: boot/initrd-2.6.31.6-desktop-1mnb.img
444.0GB: boot/initrd-desktop.img
444.0GB: boot/initrd.img
443.2GB: boot/vmlinuz
440.5GB: boot/vmlinuz-2.6.31.5-desktop-1mnb
443.2GB: boot/vmlinuz-2.6.31.6-desktop-1mnb
443.2GB: boot/vmlinuz-desktop
================================ sdb2/boot.ini: ================================
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect
c:\CMDCONS\BOOTSECT.DAT="Console de rcupration Microsoft Windows XP" /CMDCONS
C:\wubildr.mbr = "Ubuntu"
=========================== sdb5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sdb5 :
UUID=c27e7454-6747-448a-9a7b-97352f4c1676 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/ACER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
=================== sdb5: Location of files loaded by Grub: ===================
53.4GB: boot/grub/core.img
54.1GB: boot/grub/grub.cfg
52.3GB: boot/initrd.img-2.6.31-15-generic
53.3GB: boot/initrd.img-2.6.31-16-generic
53.8GB: boot/initrd.img-2.6.31-17-generic
54.1GB: boot/initrd.img-2.6.31-19-generic
51.6GB: boot/vmlinuz-2.6.31-15-generic
52.4GB: boot/vmlinuz-2.6.31-16-generic
49.4GB: boot/vmlinuz-2.6.31-17-generic
53.2GB: boot/vmlinuz-2.6.31-19-generic
54.1GB: initrd.img
53.8GB: initrd.img.old
53.2GB: vmlinuz
49.4GB: vmlinuz.old
======================== sdb8/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-19-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-19-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
insmod ntfs
set root=(hd1,8)
search --no-floppy --fs-uuid --set 6efddda001845237
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 5af42ccbf42cab69
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
insmod ext2
set root=(hd0,4)
search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
insmod ntfs
set root=(hd1,2)
search --no-floppy --fs-uuid --set 6eb097efb097bc51
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sdb8/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
================= sdb8/Wubi: Location of files loaded by Grub: =================
4.7GB: boot/grub/grub.cfg
4.1GB: boot/initrd.img-2.6.31-16-generic
3.9GB: boot/initrd.img-2.6.31-17-generic
5.0GB: boot/initrd.img-2.6.31-19-generic
4.2GB: boot/vmlinuz-2.6.31-16-generic
2.6GB: boot/vmlinuz-2.6.31-17-generic
4.5GB: boot/vmlinuz-2.6.31-19-generic
5.0GB: initrd.img
3.9GB: initrd.img.old
4.5GB: vmlinuz
2.6GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf
Dernière modification par malbo (Le 16/02/2010, à 12:39)
Hors ligne
#21 Le 17/02/2010, à 03:21
- Qid
Re : [HOW TO] bootinfoscript
@ malbo > tu vas te faire tapper sur les doigts toi
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#22 Le 17/02/2010, à 08:06
- malbo
Re : [HOW TO] bootinfoscript
Mais c'est à but pédagogique Qid.
Bon d'accord, j'abuse...
Hors ligne
#23 Le 08/06/2010, à 09:14
- kalisto07
Re : [HOW TO] bootinfoscript
merci pour l'info
Hors ligne
#24 Le 19/09/2010, à 18:07
- xavgd
Re : [HOW TO] bootinfoscript
Bonsoir à tous,
Désolé mais j'ai besoin d'aide ..
Comme vous le voyez ci dessous, j'ai une erreur dans ma phase de boot avec sda1/boot/grub/grub.cfg .. (enfin je pense que c'est ça .)
Quelqu'un pourrait il m'aider ??
Merci d'avance
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 80.0 Go, 80026361856 octets
255 têtes, 63 secteurs/piste, 9729 cylindres, total 156301488 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 149,843,967 149,841,920 83 Linux
/dev/sda2 149,846,014 156,301,311 6,455,298 5 Extended
/dev/sda5 149,846,016 156,301,311 6,455,296 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 c742fa8e-f79f-4582-818e-77c848450961 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 1591fb3e-f77e-441b-879a-aae6ac3239d1 swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
echo 'Chargement de Linux 2.6.32-25-generic ...'
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
echo 'Chargement de Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
echo 'Chargement de Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=1591fb3e-f77e-441b-879a-aae6ac3239d1 none swap sw 0 0
=================== sda1: Location of files loaded by Grub: ===================
21.6GB: boot/grub/core.img
58.1GB: boot/grub/grub.cfg
21.6GB: boot/initrd.img-2.6.32-21-generic
21.8GB: boot/initrd.img-2.6.32-24-generic
21.8GB: boot/initrd.img-2.6.32-25-generic
.1GB: boot/vmlinuz-2.6.32-21-generic
21.7GB: boot/vmlinuz-2.6.32-24-generic
21.7GB: boot/vmlinuz-2.6.32-25-generic
21.8GB: initrd.img
21.8GB: initrd.img.old
21.7GB: vmlinuz
21.7GB: vmlinuz.old
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda2
00000000 cd e7 13 54 76 8c 87 c4 3a 85 d0 df f1 4c aa 78 |...Tv...:....L.x|
00000010 df c4 ff 18 cf 90 09 b4 b2 b7 53 e2 fc 0f 7d 65 |..........S...}e|
00000020 c5 39 ad c4 2e d5 e3 5b d2 54 67 5c 13 bd cc d4 |.9.....[.Tg\....|
00000030 5f ca e4 61 2a 5c 6b 59 1c 83 0b 30 9e 55 a8 fa |_..a*\kY...0.U..|
00000040 4c 57 e7 b4 51 b0 00 21 dd 19 16 32 65 1e 31 f9 |LW..Q..!...2e.1.|
00000050 e1 c3 d6 df 75 90 42 f6 84 b7 5c 13 52 06 8e 1e |....u.B...\.R...|
00000060 de 35 01 1a 39 8f b7 10 7f 50 9d 34 96 12 ca d4 |.5..9....P.4....|
00000070 48 b7 8a fd 8d ec ff bf 10 65 2f 66 dc 52 1a 93 |H........e/f.R..|
00000080 50 0d f1 04 c0 88 ca 0c f1 de 21 3e b8 2f 20 90 |P.........!>./ .|
00000090 9d a4 c2 2d 1e ba d5 00 c7 7a 0a 9e c0 6d b8 ce |...-.....z...m..|
000000a0 59 26 2c 67 9e e8 3a 51 9b fa 15 97 3b 5f 4b 5c |Y&,g..:Q....;_K\|
000000b0 4b 94 6d ce a3 cf d8 9e 4a 94 27 ad cf 9f 56 10 |K.m.....J.'...V.|
000000c0 e7 27 9d 9d 1a 80 27 dd 86 93 b5 02 63 3b b8 37 |.'....'.....c;.7|
000000d0 7d 6f 4a c6 e7 8a 53 cf ad 6c bd a8 a5 f1 c7 b1 |}oJ...S..l......|
000000e0 7f 30 de ec 44 3b b9 f4 ff 6e 9c 45 e8 4a 86 af |.0..D;...n.E.J..|
000000f0 85 8f 50 3e 55 16 80 18 a7 61 b7 8a 9a 52 ac d9 |..P>U....a...R..|
00000100 e0 ff d7 86 11 fa 91 36 46 76 29 d7 eb e8 e8 fd |.......6Fv).....|
00000110 f7 53 60 58 80 82 6c 5e ea 45 1d f1 5b 78 5f b4 |.S`X..l^.E..[x_.|
00000120 93 26 85 97 c2 b4 f1 9b 34 9f bf 15 f6 e9 47 c7 |.&......4.....G.|
00000130 f8 08 c1 01 98 96 ec 79 99 83 18 3e d5 3b 91 84 |.......y...>.;..|
00000140 39 11 86 97 21 e5 91 64 46 e0 36 d9 6c 1b 1e 5a |9...!..dF.6.l..Z|
00000150 6e f5 10 fc 70 af f0 4b 27 f9 93 90 6c 59 ee da |n...p..K'...lY..|
00000160 80 23 49 45 2f fb c2 fb 6b 52 1d 56 bf f8 d2 b4 |.#IE/...kR.V....|
00000170 f5 0a 75 4b 2a c3 e3 ee 3f 81 04 04 92 7a f5 c9 |..uK*...?....z..|
00000180 6d 92 87 18 77 6a aa e4 0d c2 7b 7c 3c ca 12 e8 |m...wj....{|<...|
00000190 af 8c 0a 95 89 d2 1b 93 70 de 9b bf 5e 8a d5 6b |........p...^..k|
000001a0 82 c5 77 7e 75 5c 60 a0 64 ae 89 ee b6 c6 f0 a8 |..w~u\`.d.......|
000001b0 10 7e 20 40 e6 e7 b7 75 17 e2 5f 92 ae e0 00 fe |.~ @...u.._.....|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 80 62 00 00 00 |............b...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Hors ligne
#25 Le 19/09/2010, à 18:27
- malbo
Re : [HOW TO] bootinfoscript
xavgd,
dans le post #1, je demande de ne pas poster ici. Je le recolle ici rien que pour toi :
ATTENTION : je répète qu'il ne faut pas poster ici votre résultat obtenu avec le script bootinfoscript : ce résultat, il faut le poster dans la discussion où vous avez posté récemment pour demander de l'aide pour votre problème. Moi je ne répondrai pas ici et j'espère que personne ne vous répondra non plus
Je te prie de supprimer ce post et de créer une nouvelle discussion dans la même rubrique du forum "Installation d'Ubuntu". Pour initier une nouvelle discussion, c'est là :
http://doc.ubuntu-fr.org/tutoriel/howto … discussion
Et essaie de trouver un bon titre (pas "j'ai besoin d'aide...") et de donner des détails (on ne sait même pas quels sont les symptômes de ton problème)
Dernière modification par malbo (Le 16/10/2010, à 11:20)
Hors ligne