#1 Le 19/01/2010, à 22:08
- bibi6
[RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Bonjour à tous.
Lorsque je lance Ubuntu depuis GRUB, tout se passe bien jusqu'au moment de se logguer. Je vois, dans l'ordre:
- le logo Ubuntu pendant 10 secondes (OK),
- puis un écran avec le logo Ubuntu et une barre de chargement pendant environ 10 secondes également (OK),
- par contre, ensuite j'ai un écran noir, avec la souris en mode "chargement" pendant quelques secondes,
- puis l'écran brun "théâtre" et la musique de log. L'écran reste figé comme ça pendant... 3 minutes!
- Au bout de ces 3 minutes, un carré brun foncé apparaît. L'écran reste figé encore pendant 30 secondes.
- Enfin, apparaissent le logo, le nom de l'ordinateur, et les utilisateurs. Après avoir sélectionné l'utilisateur... 30 secondes s'écoulent encore avant de pouvoir entrer le mot de passe.
- Ensuite, le chargement semble normal (ouf!)
J'ai déjà essayé plusieurs choses pour y remédier, par exemple, ajouter "acpi=off" ou "noapic" en options supplémentaires du boot (comme conseillé pour certains, sur d'autres sujets), sans résultat. Quant aux messages indiquant l'avancement... je ne sais pas comment les obtenir, puisque tout est en mode graphique à cette étape (je précise que je suis nouveau sous Linux...)
Toutefois, il est arrivé deux fois, que le démarrage soit "normal"... deux fois isolées, malheureusement 
Voici quelques bootcharts:
Bootchart 1
Bootchart 2
Bootchart 3
Quelques infos sur ma config:
*Ordinateur portable Acer Aspire 5683WLMi
*OS de base: Win XP
*J'ai réalisé récemment un dual boot avec Ubuntu 9.04 (installé depuis un live CD), lequel fonctionnait correctement.
*Je suis passé au 9.10 par upgrade. La partition qui le contient est donc au format ext3.
N'hésitez pas à poser des questions.
Merci d'avance pour toute aide!
Dernière modification par bibi6 (Le 22/02/2010, à 22:40)
Hors ligne
#2 Le 22/01/2010, à 21:15
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Bonjour,
Vous n'avez pas d'indication? 
A défaut, voici encore deux nouveaux bootcharts (plus le b2 dont le lien précédent semble mort):
Bootchart 2
Bootchart 4
Bootchart 5
Par ailleurs, est-ce normal que certains fichiers situés dans /var/log ne s'affichent pas avec gedit?
Impossible d'ouvrir le fichier /var/log/messages avec le codage des caractères ..... .Merci d'avance.
Hors ligne
#3 Le 23/01/2010, à 13:14
- Ansuz
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Peux-tu nous fournir ton « dmesg » juste après le démarrage ? (tapes la commande dans le terminal et colle le résultat ici « en code », car c'est très long)
Cela permettrait d'y voir plus clair et de voir où ça coince. 
"Mieux vaut ne rien savoir que beaucoup savoir à moitié !" Friedrich Nietzsche
Hors ligne
#4 Le 24/01/2010, à 22:09
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Merci de ta réponse
En voyant les résultats de la commande, je vois clairement que quelque chose foire -- et fait une belle boucle infinie 
Le retour est tellement long que je suis obligé de l'envoyer par fichier joint!
J'ai réalisé un premier "dmesg >dmesg.txt" dont voici le résultat:
dmesg.txt
Peu après, "dmesg >dmesg2.txt" donne ceci:
dmesg2.txt
Je redémarre l'ordi et je renvoie un résultat de dmesg dès que possible
Hors ligne
#5 Le 25/01/2010, à 20:49
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Re,
Avec la meilleure volonté, je ne sais pas faire mieux:(
Je précise que je n'ai rien qui soit connecté par fiche USB...
En consultant l'aide pour dmesg, j'ai vu que l'ensemble des messages se trouve dans /proc/kmsg. J'essaie de l'ouvrir pour voir si je peux en tirer quelque chose.
Hors ligne
#6 Le 26/01/2010, à 19:18
- Ansuz
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Salut bibi6,
Oui, tu as un souci lié à l'usb à priori.
Mais il vaudrait mieux que tu fournisses le début du résultat, là tu mets l'erreur qui revient en boucle de 20 à 25 minutes (quelle patience !)
- Tu effectues la commande dans le terminal :
dmesg- Dans le terminal, tu fais un copier du début jusqu'à l'apparition de l'anomalie (voire un peu plus) et tu le colles dans ta réponse.
-Ensuite tu sélectionnes ton collé et tu cliques sur "code" afin de ne pas polluer le forum de réponses interminable.;)
Tu dis que tu n'as rien de connecté en usb ?
Sur portable, certains périphériques sont reconnus en usb. (lecteur de carte par exemple)
"Mieux vaut ne rien savoir que beaucoup savoir à moitié !" Friedrich Nietzsche
Hors ligne
#7 Le 26/01/2010, à 22:32
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Salut,
Ansuz a écrit :
Salut bibi6,
Oui, tu as un souci lié à l'usb à priori.
Mais il vaudrait mieux que tu fournisses le début du résultat, là tu mets l'erreur qui revient en boucle de 20 à 25 minutes (quelle patience !)
Certes, je voudrais bien avoir le début... mais c'est tout ce que me répond dmesg! Le dmesg6, c'est celui que j'ai effectué juste après être loggué.
Ansuz a écrit :
- Tu effectues la commande dans le terminal :
dmesg
Juste après le log, j'ai ouvert un terminal, et j'ai tapé
dmesg >dmesg6.txtAnsuz a écrit :
- Dans le terminal, tu fais un copier du début jusqu'à l'apparition de l'anomalie (voire un peu plus) et tu le colles dans ta réponse.
-Ensuite tu sélectionnes ton collé et tu cliques sur "code" afin de ne pas polluer le forum de réponses interminable.;)
D'ailleurs, si je mettais tout le contenu du fichier en réponse (je l'ai essayé pour le premier fichier), je prendrais une erreur "message trop long"
Ceci aidera peut-être: une partie du fichier /var/log/debug:
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] MTRR default type: uncachable
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] MTRR fixed ranges enabled:
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 00000-9FFFF write-back
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] A0000-BFFFF uncachable
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] C0000-CFFFF write-protect
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] D0000-DFFFF uncachable
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] E0000-FFFFF write-protect
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] MTRR variable ranges enabled:
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 2 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 3 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 4 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 5 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 6 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 7 disabled
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] initial memory mapped : 0 - 00c00000
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 0000400000 - 0037400000 page 2M
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] On node 0 totalpages: 523803
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1035000
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] DMA zone: 0 pages reserved
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] Normal zone: 1744 pages used for memmap
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] HighMem zone: 2318 pages used for memmap
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] HighMem zone: 294260 pages, LIFO batch:31
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.000000] nr_irqs_gsi: 24
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.002959] hpet clockevent registered
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176098] CPU0 attaching sched-domain:
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176103] domain 0: span 0-1 level MC
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176108] groups: 0 1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176119] CPU1 attaching sched-domain:
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176124] domain 0: span 0-1 level MC
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.176129] groups: 1 0
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.184480] ACPI: EC: Look up EC in DSDT
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.265120] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.265843] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.265935] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266027] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266118] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266216] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266664] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266677] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266690] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266702] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266715] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266857] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266955] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266971] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266987] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.266998] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267008] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267127] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267134] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267144] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267232] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267241] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267460] pci 0000:04:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267715] pci 0000:00:1c.2: bridge 32bit mmio: [0xd2000000-0xd20fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.267887] pci 0000:05:00.0: reg 10 32bit mmio: [0xd2100000-0xd2100fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268329] pci 0000:00:1c.3: bridge 32bit mmio: [0xd2100000-0xd21fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268405] pci 0000:06:00.0: reg 10 32bit mmio: [0xd2201000-0xd22017ff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268420] pci 0000:06:00.0: reg 14 io port: [0x3000-0x307f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268505] pci 0000:06:00.0: supports D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268593] pci 0000:06:04.0: reg 10 32bit mmio: [0xd2200000-0xd2200fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268632] pci 0000:06:04.0: supports D1 D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268713] pci 0000:06:04.1: reg 10 32bit mmio: [0xd2201800-0xd220187f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268807] pci 0000:06:04.1: supports D1 D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268887] pci 0000:06:04.2: reg 10 32bit mmio: [0xd2201c00-0xd2201cff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.268981] pci 0000:06:04.2: supports D1 D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269062] pci 0000:06:04.3: reg 10 32bit mmio: [0xd2202000-0xd220207f]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269156] pci 0000:06:04.3: supports D1 D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269236] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269330] pci 0000:06:04.4: supports D1 D2
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269442] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269450] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2200000-0xd22fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269539] pci_bus 0000:00: on NUMA node 0
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.269910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.270072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.270210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.270347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.270496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.270680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.278598] libata version 3.00 loaded.
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.422966] alloc irq_desc for 16 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.422970] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.422988] pci 0000:00:01.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423000] alloc irq_desc for 17 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423004] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423022] pci 0000:00:1c.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423045] pci 0000:00:1c.1: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423058] alloc irq_desc for 18 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423061] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423076] pci 0000:00:1c.2: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423089] alloc irq_desc for 19 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423093] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423108] pci 0000:00:1c.3: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423128] pci 0000:00:1e.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423155] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423161] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423166] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423171] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423177] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423183] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423188] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423193] pci_bus 0000:04: resource 1 mem: [0xd2000000-0xd20fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423199] pci_bus 0000:05: resource 1 mem: [0xd2100000-0xd21fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423204] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423209] pci_bus 0000:06: resource 1 mem: [0xd2200000-0xd22fffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423214] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423220] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423225] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423230] pci_bus 0000:07: resource 0 io: [0x3400-0x34ff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423235] pci_bus 0000:07: resource 1 io: [0x3800-0x38ff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423240] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.423246] pci_bus 0000:07: resource 3 mem: [0x84000000-0x87ffffff]
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.502689] Switched to high resolution mode on CPU 1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.503992] Switched to high resolution mode on CPU 0
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835447] pci 0000:01:00.0: Boot video device
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835700] alloc irq_desc for 24 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835704] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835720] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835732] pcieport-driver 0000:00:01.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835927] alloc irq_desc for 25 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835931] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835944] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.835961] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836212] alloc irq_desc for 26 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836216] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836230] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836246] pcieport-driver 0000:00:1c.1: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836474] alloc irq_desc for 27 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836478] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836492] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836508] pcieport-driver 0000:00:1c.2: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836745] alloc irq_desc for 28 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836749] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836763] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.836779] pcieport-driver 0000:00:1c.3: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.898677] Monitor-Mwait will be used to enter C-1 state
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.898733] Monitor-Mwait will be used to enter C-2 state
Jan 26 20:32:50 bertrand-laptop kernel: [ 0.898783] Monitor-Mwait will be used to enter C-3 state
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.460362] ata_piix 0000:00:1f.2: version 2.13
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.612042] ata_piix 0000:00:1f.2: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.616185] alloc irq_desc for 23 on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.616189] alloc kstat_irqs on node -1
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.616218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.620247] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.632443] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.632847] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.633288] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.633702] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.642400] PM: Resume from disk failed.
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.801390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 26 20:32:50 bertrand-laptop kernel: [ 2.845270] sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 26 20:32:51 bertrand-laptop kernel: [ 3.224061] tg3 0000:04:00.0: setting latency timer to 64
Jan 26 20:32:51 bertrand-laptop kernel: [ 3.267412] alloc irq_desc for 20 on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 3.267416] alloc kstat_irqs on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 3.267433] ohci1394 0000:06:00.0: setting latency timer to 64
Jan 26 20:32:51 bertrand-laptop kernel: [ 4.609528] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6a8b406211]
Jan 26 20:32:51 bertrand-laptop kernel: [ 16.825911] irda_init()
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.114173] alloc irq_desc for 29 on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.114179] alloc kstat_irqs on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.114200] tg3 0000:04:00.0: irq 29 for MSI/MSI-X
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.685343] alloc irq_desc for 22 on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.685347] alloc kstat_irqs on node -1
Jan 26 20:32:51 bertrand-laptop kernel: [ 17.685396] HDA Intel 0000:00:1b.0: setting latency timer to 64
Jan 26 20:32:52 bertrand-laptop kernel: [ 18.726821] iwl3945 0000:05:00.0: setting latency timer to 64
Jan 26 20:32:52 bertrand-laptop kernel: [ 18.888232] alloc irq_desc for 30 on node -1
Jan 26 20:32:52 bertrand-laptop kernel: [ 18.888234] alloc kstat_irqs on node -1
Jan 26 20:32:52 bertrand-laptop kernel: [ 18.888271] iwl3945 0000:05:00.0: irq 30 for MSI/MSI-X
Jan 26 20:32:52 bertrand-laptop kernel: [ 18.944324] phy0: Selected rate control algorithm 'iwl-3945-rs'
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb2
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.0/usb2
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: Device vendor/product is 1D6B:0001
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.1/usb3
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.2/usb4
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.3/usb5
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb1
Jan 26 20:32:53 bertrand-laptop udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
Jan 26 20:33:01 bertrand-laptop udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.1/usb3
Jan 26 20:33:01 bertrand-laptop udev-configure-printer: Device vendor/product is 1D6B:0001
Jan 26 20:33:08 bertrand-laptop udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb4
Jan 26 20:33:08 bertrand-laptop udev-configure-printer: Device vendor/product is 1D6B:0001
Jan 26 20:33:15 bertrand-laptop udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.3/usb5
Jan 26 20:33:15 bertrand-laptop udev-configure-printer: Device vendor/product is 1D6B:0001
Jan 26 20:33:23 bertrand-laptop udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb1
Jan 26 20:33:23 bertrand-laptop udev-configure-printer: Device vendor/product is 1D6B:0002
Jan 26 20:37:54 bertrand-laptop kernel: [ 320.370998] wlan0: authenticate with AP xxxxxxxxxxxxxxx
Jan 26 20:37:54 bertrand-laptop kernel: [ 320.374281] wlan0: authenticated
Jan 26 20:37:54 bertrand-laptop kernel: [ 320.374287] wlan0: associate with AP xxxxxxxxxxxxxxx
Jan 26 20:37:54 bertrand-laptop kernel: [ 320.378270] wlan0: RX AssocResp from xxxxxxxxxxxxxxx
(capab=0x411 status=0 aid=2)
Jan 26 20:37:54 bertrand-laptop kernel: [ 320.378274] wlan0: associated
Jan 26 20:38:04 bertrand-laptop kernel: [ 330.900148] wlan0: no IPv6 routers presentJ'aimerais bien consulter le contenu d'autres fichiers (p.ex., /var/log/messages), mais j'ai le droit à
Impossible d'ouvrir le fichier /var/log/messages avec le codage des caractères ..... .Ansuz a écrit :
Tu dis que tu n'as rien de connecté en usb ?
Sur portable, certains périphériques sont reconnus en usb. (lecteur de carte par exemple)
Où puis-je voir quels sont les périphériques connectés?
En tout cas, je n'ai rien de connecté à l'extérieur:)
Merci pour ton aide!
Hors ligne
#8 Le 27/01/2010, à 09:35
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
J'ai trouvé mieux : /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
[ 0.000000] BIOS-e820: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7fe80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe80000 (usable)
[ 0.000000] modified: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37868000 - 37feff34
[ 0.000000] Allocated new RAMDISK: 008ad000 - 01034f34
[ 0.000000] Move RAMDISK from 0000000037868000 - 0000000037feff33 to 008ad000 - 01034f33
[ 0.000000] ACPI: RSDP 000f64e0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 7fe85369 00050 (v01 PTLTD Capell00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7fe8ce20 00074 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: DSDT 7fe8708a 05D96 (v01 Acer CALISTGA 06040000 INTL 20050228)
[ 0.000000] ACPI: FACS 7fe8dfc0 00040
[ 0.000000] ACPI: APIC 7fe8ce94 00068 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7fe8cefc 00038 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7fe8cf34 0003C (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 7fe8cf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7fe8cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7fe86a3b 0064F (v01 SataRe SataPri 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe863a9 00692 (v01 SataRe SataSec 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe85945 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe8589f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe853b9 004E6 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f9] BRK ==> [00008a9000 - 00008ac0f9]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0001034f34] NEW RAMDISK ==> [00008ad000 - 0001034f34]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f6510] f6510
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fe80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe80
[ 0.000000] On node 0 totalpages: 523803
[ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1035000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294260 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c203f000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519709
[ 0.000000] Kernel command line: root=UUID=dfdad26b-2538-48b6-b831-1bf1a29e13b8
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10478080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe80)
[ 0.000000] Memory: 2051296k/2095616k available (4566k kernel code, 43164k reserved, 2142k data, 540k init, 1186312k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.722 MHz processor.
[ 0.002747] Console: colour VGA+ 80x25
[ 0.002753] console [tty0] enabled
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.44 BogoMIPS (lpj=6650888)
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.020006] ACPI: Core revision 20090521
[ 0.040483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083175] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 0.084001] APIC calibration not consistent with PM-Timer: 187ms instead of 100ms
[ 0.084001] APIC delta adjusted to PM-Timer: 1039061 (1953411)
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3325.08 BogoMIPS (lpj=6650177)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.170458] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 0.171127] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172030] Brought up 2 CPUs
[ 0.172093] Total of 2 processors activated (6650.53 BogoMIPS).
[ 0.172212] CPU0 attaching sched-domain:
[ 0.172217] domain 0: span 0-1 level MC
[ 0.172223] groups: 0 1
[ 0.172233] CPU1 attaching sched-domain:
[ 0.172237] domain 0: span 0-1 level MC
[ 0.172242] groups: 1 0
[ 0.176034] Booting paravirtualized kernel on bare hardware
[ 0.176451] regulator: core version 0.5
[ 0.176451] Time: 8:34:50 Date: 01/27/10
[ 0.176451] NET: Registered protocol family 16
[ 0.176554] EISA bus registered
[ 0.176628] ACPI: bus type pci registered
[ 0.176809] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176875] PCI: MCFG area at e0000000 reserved in E820
[ 0.176934] PCI: Using MMCONFIG for extended config space
[ 0.176993] PCI: Using configuration type 1 for base access
[ 0.179127] bio: create slab <bio-0> at 0
[ 0.181803] ACPI: EC: Look up EC in DSDT
[ 0.188672] ACPI: BIOS _OSI(Linux) query ignored
[ 0.190086] ACPI: Interpreter enabled
[ 0.190155] ACPI: (supports S0 S3 S4 S5)
[ 0.190416] ACPI: Using IOAPIC for interrupt routing
[ 0.196437] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.224146] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.267236] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.267303] ACPI: EC: driver started in poll mode
[ 0.268072] ACPI: No dock devices found.
[ 0.268955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.269216] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.269283] pci 0000:00:01.0: PME# disabled
[ 0.269471] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
[ 0.269559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.269626] pci 0000:00:1b.0: PME# disabled
[ 0.269803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.269869] pci 0000:00:1c.0: PME# disabled
[ 0.270050] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.270116] pci 0000:00:1c.1: PME# disabled
[ 0.270296] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.270363] pci 0000:00:1c.2: PME# disabled
[ 0.270543] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.270610] pci 0000:00:1c.3: PME# disabled
[ 0.270758] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.270850] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.270942] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.271035] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[ 0.271133] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff]
[ 0.271223] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.271290] pci 0000:00:1d.7: PME# disabled
[ 0.271576] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.271652] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.271716] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f)
[ 0.271788] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[ 0.271952] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.271964] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.271977] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.271989] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.272014] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.272066] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272132] pci 0000:00:1f.2: PME# disabled
[ 0.272270] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df]
[ 0.272368] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
[ 0.272385] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.272401] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
[ 0.272412] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.272422] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.272542] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.272549] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.272558] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.272647] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.272655] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.272875] pci 0000:04:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff]
[ 0.273010] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.273078] pci 0000:04:00.0: PME# disabled
[ 0.273242] pci 0000:00:1c.2: bridge 32bit mmio: [0xd2000000-0xd20fffff]
[ 0.273416] pci 0000:05:00.0: reg 10 32bit mmio: [0xd2100000-0xd2100fff]
[ 0.273686] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.273761] pci 0000:05:00.0: PME# disabled
[ 0.273966] pci 0000:00:1c.3: bridge 32bit mmio: [0xd2100000-0xd21fffff]
[ 0.274042] pci 0000:06:00.0: reg 10 32bit mmio: [0xd2201000-0xd22017ff]
[ 0.274057] pci 0000:06:00.0: reg 14 io port: [0x3000-0x307f]
[ 0.274142] pci 0000:06:00.0: supports D2
[ 0.274146] pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
[ 0.274215] pci 0000:06:00.0: PME# disabled
[ 0.274343] pci 0000:06:04.0: reg 10 32bit mmio: [0xd2200000-0xd2200fff]
[ 0.274381] pci 0000:06:04.0: supports D1 D2
[ 0.274386] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274454] pci 0000:06:04.0: PME# disabled
[ 0.274575] pci 0000:06:04.1: reg 10 32bit mmio: [0xd2201800-0xd220187f]
[ 0.274669] pci 0000:06:04.1: supports D1 D2
[ 0.274673] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.274741] pci 0000:06:04.1: PME# disabled
[ 0.274863] pci 0000:06:04.2: reg 10 32bit mmio: [0xd2201c00-0xd2201cff]
[ 0.274957] pci 0000:06:04.2: supports D1 D2
[ 0.274961] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.275029] pci 0000:06:04.2: PME# disabled
[ 0.275151] pci 0000:06:04.3: reg 10 32bit mmio: [0xd2202000-0xd220207f]
[ 0.275245] pci 0000:06:04.3: supports D1 D2
[ 0.275250] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.275317] pci 0000:06:04.3: PME# disabled
[ 0.275438] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.275532] pci 0000:06:04.4: supports D1 D2
[ 0.275536] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.275604] pci 0000:06:04.4: PME# disabled
[ 0.275747] pci 0000:00:1e.0: transparent bridge
[ 0.275813] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.275821] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2200000-0xd22fffff]
[ 0.275910] pci_bus 0000:00: on NUMA node 0
[ 0.275919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.276460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.276599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.276736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.276886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.277070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.283271] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 0.283897] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 0.284529] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 0.285189] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 0.285849] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15)
[ 0.286471] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled.
[ 0.287184] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 0.287801] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 0.288566] SCSI subsystem initialized
[ 0.288661] libata version 3.00 loaded.
[ 0.288661] usbcore: registered new interface driver usbfs
[ 0.288661] usbcore: registered new interface driver hub
[ 0.288661] usbcore: registered new device driver usb
[ 0.288661] ACPI: WMI: Mapper loaded
[ 0.288661] PCI: Using ACPI for IRQ routing
[ 0.288661] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.288661] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 0.300014] Bluetooth: Core ver 2.15
[ 0.300098] NET: Registered protocol family 31
[ 0.300098] Bluetooth: HCI device and connection manager initialized
[ 0.300146] Bluetooth: HCI socket layer initialized
[ 0.300205] NetLabel: Initializing
[ 0.300262] NetLabel: domain hash size = 128
[ 0.300319] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.300397] NetLabel: unlabeled traffic allowed by default
[ 0.300519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.300753] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320014] pnp: PnP ACPI init
[ 0.320089] ACPI: bus type pnp registered
[ 0.399633] pnp: PnP ACPI: found 11 devices
[ 0.399696] ACPI: ACPI bus type pnp unregistered
[ 0.399756] PnPBIOS: Disabled by ACPI PNP
[ 0.399829] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.399895] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.399959] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.400042] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.400107] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.400171] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.400243] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.400317] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.400380] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.400443] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.400505] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.400567] system 00:06: ioport range 0xfe00-0xfefe has been reserved
[ 0.400630] system 00:06: ioport range 0xff2c-0xff2f has been reserved
[ 0.435492] AppArmor: AppArmor Filesystem Enabled
[ 0.435681] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.435757] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.435817] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.435881] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff
[ 0.435944] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.436031] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.436090] pci 0000:00:1c.0: IO window: disabled
[ 0.436153] pci 0000:00:1c.0: MEM window: disabled
[ 0.436216] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.436279] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.436340] pci 0000:00:1c.1: IO window: disabled
[ 0.436404] pci 0000:00:1c.1: MEM window: disabled
[ 0.436467] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.436531] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.436591] pci 0000:00:1c.2: IO window: disabled
[ 0.436656] pci 0000:00:1c.2: MEM window: 0xd2000000-0xd20fffff
[ 0.436719] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.436783] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.436843] pci 0000:00:1c.3: IO window: disabled
[ 0.436907] pci 0000:00:1c.3: MEM window: 0xd2100000-0xd21fffff
[ 0.436972] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.437046] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[ 0.437110] pci 0000:06:04.0: IO window: 0x003400-0x0034ff
[ 0.437175] pci 0000:06:04.0: IO window: 0x003800-0x0038ff
[ 0.437241] pci 0000:06:04.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.437307] pci 0000:06:04.0: MEM window: 0x84000000-0x87ffffff
[ 0.437373] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.437435] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.437501] pci 0000:00:1e.0: MEM window: 0xd2200000-0xd22fffff
[ 0.437565] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.437639] alloc irq_desc for 16 on node -1
[ 0.437643] alloc kstat_irqs on node -1
[ 0.437652] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.437719] pci 0000:00:01.0: setting latency timer to 64
[ 0.437732] alloc irq_desc for 17 on node -1
[ 0.437736] alloc kstat_irqs on node -1
[ 0.437743] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.437813] pci 0000:00:1c.0: setting latency timer to 64
[ 0.437827] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.437895] pci 0000:00:1c.1: setting latency timer to 64
[ 0.437908] alloc irq_desc for 18 on node -1
[ 0.437911] alloc kstat_irqs on node -1
[ 0.437918] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.437985] pci 0000:00:1c.2: setting latency timer to 64
[ 0.437998] alloc irq_desc for 19 on node -1
[ 0.438002] alloc kstat_irqs on node -1
[ 0.438008] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.438077] pci 0000:00:1c.3: setting latency timer to 64
[ 0.438086] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.438155] pci 0000:00:1e.0: setting latency timer to 64
[ 0.438171] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.438242] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.438248] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.438254] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.438259] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.438265] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.438270] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 0.438275] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 0.438281] pci_bus 0000:04: resource 1 mem: [0xd2000000-0xd20fffff]
[ 0.438286] pci_bus 0000:05: resource 1 mem: [0xd2100000-0xd21fffff]
[ 0.438292] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.438297] pci_bus 0000:06: resource 1 mem: [0xd2200000-0xd22fffff]
[ 0.438302] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.438307] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.438312] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.438318] pci_bus 0000:07: resource 0 io: [0x3400-0x34ff]
[ 0.438322] pci_bus 0000:07: resource 1 io: [0x3800-0x38ff]
[ 0.438328] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.438333] pci_bus 0000:07: resource 3 mem: [0x84000000-0x87ffffff]
[ 0.438395] NET: Registered protocol family 2
[ 0.438628] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.439270] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.440085] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.440489] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.440553] TCP reno registered
[ 0.440734] NET: Registered protocol family 1
[ 0.440900] Trying to unpack rootfs image as initramfs...
[ 0.503260] Switched to high resolution mode on CPU 1
[ 0.503981] Switched to high resolution mode on CPU 0
[ 0.823114] Freeing initrd memory: 7711k freed
[ 0.828752] Simple Boot Flag at 0x36 set to 0x1
[ 0.829164] cpufreq-nforce2: No nForce2 chipset.
[ 0.829274] Scanning for low memory corruption every 60 seconds
[ 0.829515] audit: initializing netlink socket (disabled)
[ 0.831611] type=2000 audit(1264581289.828:1): initialized
[ 0.848776] highmem bounce pool size: 64 pages
[ 0.848844] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.851825] VFS: Disk quotas dquot_6.5.2
[ 0.852014] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.853149] fuse init (API version 7.12)
[ 0.853382] msgmni has been set to 1705
[ 0.853847] alg: No test for stdrng (krng)
[ 0.853932] io scheduler noop registered
[ 0.853992] io scheduler anticipatory registered
[ 0.854051] io scheduler deadline registered
[ 0.854188] io scheduler cfq registered (default)
[ 0.854414] pci 0000:01:00.0: Boot video device
[ 0.854668] alloc irq_desc for 24 on node -1
[ 0.854672] alloc kstat_irqs on node -1
[ 0.854687] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.854700] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.854894] alloc irq_desc for 25 on node -1
[ 0.854898] alloc kstat_irqs on node -1
[ 0.854912] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.854928] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.855160] alloc irq_desc for 26 on node -1
[ 0.855164] alloc kstat_irqs on node -1
[ 0.855178] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.855194] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.855423] alloc irq_desc for 27 on node -1
[ 0.855427] alloc kstat_irqs on node -1
[ 0.855440] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.855456] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.855696] alloc irq_desc for 28 on node -1
[ 0.855699] alloc kstat_irqs on node -1
[ 0.855713] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.855729] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.855909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.856233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.912116] ACPI: AC Adapter [ACAD] (on-line)
[ 0.912296] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.912372] ACPI: Power Button [PWRF]
[ 0.912521] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.912660] ACPI: Lid Switch [LID]
[ 0.912804] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.912879] ACPI: Sleep Button [SLPB]
[ 0.913019] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.913094] ACPI: Power Button [PWRB]
[ 0.914328] ACPI: SSDT 7fe860eb 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.915418] ACPI: SSDT 7fe85ba4 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.919527] Monitor-Mwait will be used to enter C-1 state
[ 0.919583] Monitor-Mwait will be used to enter C-2 state
[ 0.919633] Monitor-Mwait will be used to enter C-3 state
[ 0.919649] Marking TSC unstable due to TSC halts in idle
[ 0.919741] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.920027] processor LNXCPU:00: registered as cooling_device0
[ 0.920094] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.920880] ACPI: SSDT 7fe862e1 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.921728] ACPI: SSDT 7fe86066 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.923343] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.923617] processor LNXCPU:01: registered as cooling_device1
[ 0.923684] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.112105] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.112181] ACPI: Thermal Zone [TZ00] (38 C)
[ 1.224106] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.224181] ACPI: Thermal Zone [TZ01] (38 C)
[ 1.224365] isapnp: Scanning for PnP cards...
[ 1.579338] isapnp: No Plug & Play device found
[ 2.480163] ACPI: Battery Slot [BAT1] (battery present)
[ 2.480451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.480725] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.483309] brd: module loaded
[ 2.484258] loop: module loaded
[ 2.484448] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.484731] ata_piix 0000:00:1f.2: version 2.13
[ 2.484756] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.484826] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.640035] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.640154] scsi0 : ata_piix
[ 2.640369] scsi1 : ata_piix
[ 2.642188] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 2.642254] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 2.644143] Fixed MDIO Bus: probed
[ 2.644270] PPP generic driver version 2.4.2
[ 2.644494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.644586] alloc irq_desc for 23 on node -1
[ 2.644590] alloc kstat_irqs on node -1
[ 2.644600] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.644679] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.644685] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.644826] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.648832] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.648900] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.648923] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000
[ 2.660028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.660219] usb usb1: configuration #1 chosen from 1 choice
[ 2.660334] hub 1-0:1.0: USB hub found
[ 2.660404] hub 1-0:1.0: 8 ports detected
[ 2.660581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.660678] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.660779] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.660850] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.660856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.660974] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.661096] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 2.661298] usb usb2: configuration #1 chosen from 1 choice
[ 2.661410] hub 2-0:1.0: USB hub found
[ 2.661478] hub 2-0:1.0: 2 ports detected
[ 2.661622] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.661693] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.661699] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.661822] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.661943] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 2.662141] usb usb3: configuration #1 chosen from 1 choice
[ 2.662252] hub 3-0:1.0: USB hub found
[ 2.662320] hub 3-0:1.0: 2 ports detected
[ 2.662461] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.662535] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.662541] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.662660] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.662777] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.662975] usb usb4: configuration #1 chosen from 1 choice
[ 2.663091] hub 4-0:1.0: USB hub found
[ 2.663158] hub 4-0:1.0: 2 ports detected
[ 2.663297] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.663367] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.663373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.663490] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.663606] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 2.663805] usb usb5: configuration #1 chosen from 1 choice
[ 2.663920] hub 5-0:1.0: USB hub found
[ 2.663988] hub 5-0:1.0: 2 ports detected
[ 2.664239] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 2.665923] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.666081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.666149] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.666219] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.666286] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.666353] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.666537] mice: PS/2 mouse device common for all mice
[ 2.666855] rtc_cmos 00:07: RTC can wake from S4
[ 2.666977] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.667075] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.667334] device-mapper: uevent: version 1.0.3
[ 2.667561] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.667743] device-mapper: multipath: version 1.1.0 loaded
[ 2.667805] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.668096] EISA: Probing bus 0 at eisa.0
[ 2.668163] Cannot allocate resource for EISA slot 1
[ 2.668234] Cannot allocate resource for EISA slot 2
[ 2.668300] Cannot allocate resource for EISA slot 3
[ 2.668385] EISA: Detected 0 cards.
[ 2.668765] cpuidle: using governor ladder
[ 2.669076] cpuidle: using governor menu
[ 2.669420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.670156] TCP cubic registered
[ 2.670515] NET: Registered protocol family 10
[ 2.671452] lo: Disabled Privacy Extensions
[ 2.672217] NET: Registered protocol family 17
[ 2.672310] Bluetooth: L2CAP ver 2.13
[ 2.672370] Bluetooth: L2CAP socket layer initialized
[ 2.672431] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.672489] Bluetooth: SCO socket layer initialized
[ 2.672619] Bluetooth: RFCOMM TTY layer initialized
[ 2.672688] Bluetooth: RFCOMM socket layer initialized
[ 2.672748] Bluetooth: RFCOMM ver 1.11
[ 2.673450] Using IPI No-Shortcut mode
[ 2.673621] PM: Resume from disk failed.
[ 2.673635] registered taskstats version 1
[ 2.673821] Magic number: 10:872:574
[ 2.673965] rtc_cmos 00:07: setting system clock to 2010-01-27 08:34:52 UTC (1264581292)
[ 2.674031] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.674084] EDD information not available.
[ 2.812697] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 2.812765] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.828844] ata2.00: ATAPI: Slimtype DVDRW SSM-8515S, GRS6, max UDMA/33
[ 2.829147] ata1.00: configured for UDMA/100
[ 2.829326] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 2.829523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.829615] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.829732] sd 0:0:0:0: [sda] Write Protect is off
[ 2.829787] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.829816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.830025] sda: sda1 sda2 sda3 sda4 <
[ 2.868396] ata2.00: configured for UDMA/33
[ 2.871468] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GRS6 PQ: 0 ANSI: 5
[ 2.880879] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.880954] Uniform CD-ROM driver Revision: 3.20
[ 2.881150] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.881232] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.883638] sda5 sda6 sda7 >
[ 2.911151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.972067] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 3.000056] Clocksource tsc unstable (delta = -154308299 ns)
[ 3.052363] Freeing unused kernel memory: 540k freed
[ 3.052814] Write protecting the kernel text: 4568k
[ 3.052932] Write protecting the kernel read-only data: 1836k
[ 3.168904] usb 1-4: configuration #1 chosen from 1 choice
[ 3.206303] Linux agpgart interface v0.103
[ 3.271127] alloc irq_desc for 20 on node -1
[ 3.271131] alloc kstat_irqs on node -1
[ 3.271140] ohci1394 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.271207] ohci1394 0000:06:00.0: setting latency timer to 64
[ 3.280337] tg3.c:v3.99 (April 20, 2009)
[ 3.280418] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.280483] tg3 0000:04:00.0: setting latency timer to 64
[ 3.283848] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[ 3.283967] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.292070] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 3.292140] tg3 0000:04:00.0: PME# disabled
[ 3.353055] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[d2201000-d22017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.359898] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:16:d4:56:ff:02
[ 3.359968] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.360053] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.360107] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.155916] xor: automatically using best checksumming function: pIII_sse
[ 4.172009] pIII_sse : 5748.000 MB/sec
[ 4.172064] xor: using function: pIII_sse (5748.000 MB/sec)
[ 4.175030] device-mapper: dm-raid45: initialized v0.2594b
[ 4.331639] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.331709] EXT3-fs: write access will be enabled during recovery.
[ 4.629612] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6a8b406211]
[ 4.715417] kjournald starting. Commit interval 5 seconds
[ 4.715459] EXT3-fs: sda5: orphan cleanup on readonly fs
[ 4.715470] ext3_orphan_cleanup: deleting unreferenced inode 565251
[ 4.715541] EXT3-fs: sda5: 1 orphan inode deleted
[ 4.715545] EXT3-fs: recovery complete.
[ 4.717594] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.469721] type=1505 audit(1264581295.295:2): operation="profile_load" pid=453 name=/usr/share/gdm/guest-session/Xsession
[ 5.480404] type=1505 audit(1264581295.306:3): operation="profile_load" pid=454 name=/sbin/dhclient3
[ 5.481575] type=1505 audit(1264581295.306:4): operation="profile_load" pid=454 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.482120] type=1505 audit(1264581295.306:5): operation="profile_load" pid=454 name=/usr/lib/connman/scripts/dhclient-script
[ 5.518243] type=1505 audit(1264581295.342:6): operation="profile_load" pid=455 name=/usr/bin/evince
[ 5.532553] type=1505 audit(1264581295.358:7): operation="profile_load" pid=455 name=/usr/bin/evince-previewer
[ 5.540938] type=1505 audit(1264581295.366:8): operation="profile_load" pid=455 name=/usr/bin/evince-thumbnailer
[ 5.553501] type=1505 audit(1264581295.378:9): operation="profile_load" pid=457 name=/usr/lib/cups/backend/cups-pdf
[ 5.554770] type=1505 audit(1264581295.378:10): operation="profile_load" pid=457 name=/usr/sbin/cupsd
[ 5.558078] type=1505 audit(1264581295.382:11): operation="profile_load" pid=458 name=/usr/sbin/tcpdump
[ 15.715064] udev: starting version 147
[ 15.734840] lp: driver loaded but no devices found
[ 15.768305] irda_init()
[ 15.768319] NET: Registered protocol family 23
[ 15.813045] EXT3 FS on sda5, internal journal
[ 15.983228] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 15.983237] tg3 0000:04:00.0: PME# disabled
[ 15.983347] alloc irq_desc for 29 on node -1
[ 15.983350] alloc kstat_irqs on node -1
[ 15.983369] tg3 0000:04:00.0: irq 29 for MSI/MSI-X
[ 16.185320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.446971] intel_rng: FWH not detected
[ 16.503838] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.554397] alloc irq_desc for 22 on node -1
[ 16.554401] alloc kstat_irqs on node -1
[ 16.554413] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.554461] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.626545] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 16.701480] Registered led device: acer-wmi::mail
[ 17.463039] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
[ 17.463067] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[ 17.463070] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[ 17.463077] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
[ 17.472407] sdhci: Secure Digital Host Controller Interface driver
[ 17.472411] sdhci: Copyright(c) Pierre Ossman
[ 17.578371] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.610138] cfg80211: Calling CRDA to update world regulatory domain
[ 17.629808] cfg80211: World regulatory domain updated:
[ 17.629812] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.629816] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.629819] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.629822] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.629825] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.629828] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.673928] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 17.673932] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 17.674027] iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.674042] iwl3945 0000:05:00.0: setting latency timer to 64
[ 17.704925] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 17.704932] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 17.704937] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 17.704947] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 17.704951] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 17.705224] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xd2200000 - 0xd22fffff
[ 17.705227] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 17.712311] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[ 17.712379] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[ 17.712391] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 17.712569] Registered led device: mmc0::
[ 17.712621] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[ 17.712654] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[ 17.712724] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[ 17.712731] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 17.712793] Registered led device: mmc1::
[ 17.712841] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 17.750950] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 17.750955] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 17.751077] alloc irq_desc for 30 on node -1
[ 17.751080] alloc kstat_irqs on node -1
[ 17.751116] iwl3945 0000:05:00.0: irq 30 for MSI/MSI-X
[ 17.858891] Linux video capture interface: v2.00
[ 17.861529] gspca: main v2.6.0 registered
[ 17.865762] gspca: probing 046d:0896
[ 17.867240] vc032x: check sensor header 2c
[ 17.868985] usb 1-4: USB disconnect, address 2
[ 17.872937] vc032x: I2c Bus Busy Wait 2c
[ 17.872943] vc032x: I2c Bus Busy Wait 2c
[ 17.872945] vc032x: I2c Bus Busy Wait 2c
[ 17.872950] vc032x: I2c Bus Busy Wait 2c
[ 17.872954] vc032x: I2c Bus Busy Wait 2c
[ 17.872959] vc032x: I2c Bus Busy Wait 2c
[ 17.872964] vc032x: I2c Bus Busy Wait 2c
[ 17.872968] vc032x: I2c Bus Busy Wait 2c
[ 17.872973] vc032x: I2c Bus Busy Wait 2c
[ 17.872978] vc032x: I2c Bus Busy Wait 2c
[ 17.872982] vc032x: I2c Bus Busy Wait 2c
[ 17.872987] vc032x: I2c Bus Busy Wait 2c
[ 17.872992] vc032x: I2c Bus Busy Wait 2c
[ 17.872996] vc032x: I2c Bus Busy Wait 2c
[ 17.873001] vc032x: I2c Bus Busy Wait 2c
[ 17.873005] vc032x: I2c Bus Busy Wait 2c
[ 17.873010] vc032x: I2c Bus Busy Wait 2c
[ 17.873015] vc032x: I2c Bus Busy Wait 2c
[ 17.873017] vc032x: Unknown sensor...
[ 17.873030] vc032x: probe of 1-4:1.0 failed with error -22
[ 17.873073] usbcore: registered new interface driver vc032x
[ 17.873077] vc032x: registered
[ 17.881293] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.915444] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 17.982381] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 18.059463] Registered led device: iwl-phy0::radio
[ 18.059548] Registered led device: iwl-phy0::assoc
[ 18.059585] Registered led device: iwl-phy0::RX
[ 18.059610] Registered led device: iwl-phy0::TX
[ 18.078212] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.158615] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x230-0x237
[ 18.160672] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.161557] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.162272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.163192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.168054] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 18.283463] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 18.319143] type=1505 audit(1264577708.142:12): operation="profile_replace" pid=1268 name=/usr/share/gdm/guest-session/Xsession
[ 18.320462] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.321345] type=1505 audit(1264577708.146:13): operation="profile_replace" pid=1269 name=/sbin/dhclient3
[ 18.322226] type=1505 audit(1264577708.146:14): operation="profile_replace" pid=1269 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 18.322707] type=1505 audit(1264577708.146:15): operation="profile_replace" pid=1269 name=/usr/lib/connman/scripts/dhclient-script
[ 18.327907] type=1505 audit(1264577708.150:16): operation="profile_replace" pid=1270 name=/usr/bin/evince
[ 18.352272] type=1505 audit(1264577708.178:17): operation="profile_replace" pid=1270 name=/usr/bin/evince-previewer
[ 18.361302] type=1505 audit(1264577708.186:18): operation="profile_replace" pid=1270 name=/usr/bin/evince-thumbnailer
[ 18.363895] usb 1-4: configuration #1 chosen from 1 choice
[ 18.370602] gspca: probing 046d:0896
[ 18.370926] vc032x: check sensor header 2c
[ 18.373673] type=1505 audit(1264577708.198:19): operation="profile_replace" pid=1276 name=/usr/lib/cups/backend/cups-pdf
[ 18.374752] type=1505 audit(1264577708.198:20): operation="profile_replace" pid=1276 name=/usr/sbin/cupsd
[ 18.378925] type=1505 audit(1264577708.202:21): operation="profile_replace" pid=1277 name=/usr/sbin/tcpdump
[ 18.415875] vc032x: I2c Bus Busy Wait 2c
[ 18.456557] vc032x: I2c Bus Busy Wait 2c
[ 18.460676] vc032x: I2c Bus Busy Wait 2c
[ 18.500300] vc032x: I2c Bus Busy Wait 2c
[ 18.538701] vc032x: I2c Bus Busy Wait 2c
[ 18.577843] vc032x: I2c Bus Busy Wait 2c
[ 18.610798] vc032x: I2c Bus Busy Wait 2c
[ 18.648675] vc032x: I2c Bus Busy Wait 2c
[ 18.684551] vc032x: I2c Bus Busy Wait 2c
[ 18.720671] vc032x: I2c Bus Busy Wait 2c
[ 18.754042] vc032x: I2c Bus Busy Wait 2c
[ 18.798189] vc032x: I2c Bus Busy Wait 2c
[ 18.836281] vc032x: I2c Bus Busy Wait 2c
[ 18.874908] vc032x: I2c Bus Busy Wait 2c
[ 18.913277] vc032x: I2c Bus Busy Wait 2c
[ 18.952017] vc032x: I2c Bus Busy Wait 2c
[ 19.000167] vc032x: I2c Bus Busy Wait 2c
[ 19.066974] vc032x: I2c Bus Busy Wait 2c
[ 19.066978] vc032x: Unknown sensor...
[ 19.066998] vc032x: probe of 1-4:1.0 failed with error -22
[ 19.067077] usb 1-4: USB disconnect, address 3
[ 19.227733] ppdev: user-space parallel port driver
[ 19.318503] usb 1-4: new high speed USB device using ehci_hcd and address 4Toute remarque est la bienvenue
Personnellement, je soupçonne "hub" et "uhci_hcd" (voir vers le timing 2.66....); qu'en dites-vous?
Hors ligne
#9 Le 29/01/2010, à 23:59
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Un petit up pour savoir si quelqu'un a une idée...:(
De mon côté, j'ai repéré des options de boot qui peuvent être utiles pour avoir de meilleurs dmesg: l'option "break".
https://help.ubuntu.com/community/BootOptions
J'ai essayé l'option "break=bottom", j'ai tapé, au moment où il m'était permis de lancer une commande:
dmesg >/var/bottom_dmesgmais je n'ai pas pu accéder au fichier que je venais (normalement) de créer...
Comment puis-je récupérer la sortie de dmesg autrement?
Hors ligne
#10 Le 22/02/2010, à 22:38
- bibi6
Re : [RESOLU][Karmic Koala]Démarrage très lent lors de la phase de log...
Finalement j'ai trouvé le problème!
Un début de réponse ici:
http://forum.ubuntu-fr.org/viewtopic.php?id=297041
et là:
http://ubuntuforums.org/showthread.php?t=1047210
Tout ça pour dire que le boot lent était dû à une non-reconnaissance de la webcam! Il me suffit, si je vois l'écran initial trop longtemps, de manipuler un peu la webcam pour retrouver une vitesse normale.
Merci à Ansuz pour l'aide!
Hors ligne