Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 18/06/2006, à 20:30

FreedomSound

Re : Pinnacle PCTV USB Stick et ubuntu

Bon, perso, je capte la TNT avec ma clef...

Problème, c'est que l'image coupe souvent.. et le son avec.. c'est un peu saccadé.
voici un passage de ce que me dit VLC

[00000275] ts demuxer debug: transport_error_indicator set (pid=130)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer warning: discontinuity received 0xb instead of 0x2 (pid=120)
[00000275] ts demuxer warning: discontinuity received 0x6 instead of 0xc (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=131)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer warning: discontinuity received 0x7 instead of 0x6 (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer debug: transport_error_indicator set (pid=120)
[00000275] ts demuxer warning: discontinuity received 0x3 instead of 0x8 (pid=120)
[00000275] ts demuxer warning: discontinuity received 0xa instead of 0x4 (pid=120)
[00000344] mpeg_audio decoder debug: emulated startcode (no startcode on following frame)
[00000356] main private warning: backward_pts != dts (40000)
[00000356] main private warning: backward_pts != current_pts (-40000)
[00000350] main video output warning: late picture skipped (1150658937723820)
[00000319] main audio output warning: timing screwed, stopping resampling
[00000319] main audio output warning: buffer is 86601 in advance, triggering downsampling
[00000356] main private debug: decoded 87/107 pictures
[00000354] main video output warning: late picture skipped (-2724)

Quelqu'un a une idée ?


humpf !
M'enfin ?!

Hors ligne

#27 Le 18/06/2006, à 22:22

FreedomSound

Re : Pinnacle PCTV USB Stick et ubuntu

schumnana a écrit :

En fait, je viens de me rendre compte que ma dapper se mélangeait un peu les pinceaux entre 2 versions de 2.6.15-23-k7 et  2.6.15-25-k7. En forçant le répertoire de compilation, cela fonctionne.

Bah écoute, je viens de mettre à jour mon kernel en 2.6.15-26-686. Et je viens de recompiler les modules de v4l-dvb.
J'ai fait mon make Install...
Et maintenant que je lance le module, il me dit :

FATAL: Error inserting em28xx (/lib/modules/2.6.15-25-386/kernel/drivers/media/video/em28xx/em28xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg me dit :

[17180714.652000] em28xx: Unknown symbol ir_codes_pinnacle2
[17180714.652000] em28xx: Unknown symbol ir_codes_em_terratec
[17180714.652000] em28xx: Unknown symbol v4l_printk_ioctl
[17180714.652000] em28xx: Unknown symbol ir_codes_em_terratec2
[17180714.656000] em28xx: Unknown symbol ir_codes_em_pinnacle_usb

Est-ce qu'il y aurai un rapport avec un mélangeage de pinceau ?


humpf !
M'enfin ?!

Hors ligne

#28 Le 19/06/2006, à 13:36

RaOuf

Re : Pinnacle PCTV USB Stick et ubuntu

Bonjour,

j'ai fait tout ce qui était écrit ici mais malheureusement le driver em-2880_dvb ne veut pas s'installer. Je ne trouve pas de solution.
Merci de m'éclairer .

voici l'erreur

FATAL: Error inserting em2880_dvb (/lib/modules/2.6.15-25-686/kernel/drivers/media/video/em28xx/em2880-dvb.ko): Unknown symbol in module, or unknown parameter (see dmesg)

si vous voulez mon lsmod ou mon dmesg dites le moi.

Merci

#29 Le 19/06/2006, à 18:40

FreedomSound

Re : Pinnacle PCTV USB Stick et ubuntu

bon, depuis, j'ai des problèmes de freeze..
J'en ai informé le développeur qui m'as dit que le drivers que je viens d'installer (oui parce que j'ai réinstaller tout mon pc..) venait du drivers qui est buggué

Il m'a conseiller de revenir à une version plus ancienne pour mon PCTV PINNACLE STICK USB

JE test et je vous dis si çà a réglé mes soucis.


humpf !
M'enfin ?!

Hors ligne

#30 Le 19/06/2006, à 18:59

FreedomSound

Re : Pinnacle PCTV USB Stick et ubuntu

oki çà a régler mes soucis (sauf de souris)

mmh donc, simple :
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb
cd v4l-dvb
hg up 3511
make
make install


humpf !
M'enfin ?!

Hors ligne

#31 Le 21/06/2006, à 23:35

schumnana

Re : Pinnacle PCTV USB Stick et ubuntu

FreedomSound a écrit :
schumnana a écrit :

En fait, je viens de me rendre compte que ma dapper se mélangeait un peu les pinceaux entre 2 versions de 2.6.15-23-k7 et  2.6.15-25-k7. En forçant le répertoire de compilation, cela fonctionne.

Bah écoute, je viens de mettre à jour mon kernel en 2.6.15-26-686. Et je viens de recompiler les modules de v4l-dvb.
J'ai fait mon make Install...
Et maintenant que je lance le module, il me dit :

FATAL: Error inserting em28xx (/lib/modules/2.6.15-25-386/kernel/drivers/media/video/em28xx/em28xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg me dit :

[17180714.652000] em28xx: Unknown symbol ir_codes_pinnacle2
[17180714.652000] em28xx: Unknown symbol ir_codes_em_terratec
[17180714.652000] em28xx: Unknown symbol v4l_printk_ioctl
[17180714.652000] em28xx: Unknown symbol ir_codes_em_terratec2
[17180714.656000] em28xx: Unknown symbol ir_codes_em_pinnacle_usb

Est-ce qu'il y aurai un rapport avec un mélangeage de pinceau ?

Oui tout-à-fait, moi j'avais des 2.6.15-23 et 2.6.15-25 qui étaient installés, j'ai enlevé toutes les références du  2.6.15-23 dans les linux sources, kernel, headers ... . Si cela ne fonctionne pas, tu peux forcer dans le MakeFile (v4l-dvb/v4l) $(KERNELRELEASE) par 2.6.15-25-386 (ou la version que tu veux).

Hors ligne

#32 Le 23/06/2006, à 21:44

Albert Saint Yves

Re : Pinnacle PCTV USB Stick et ubuntu

Edit : message insultant sans rapport avec l'objet de ce site.

Dernière modification par Ju. (Le 14/10/2006, à 17:40)

#33 Le 23/06/2006, à 22:19

Euskaral

Re : Pinnacle PCTV USB Stick et ubuntu

*mort de rire*

Hors ligne

#34 Le 06/07/2006, à 23:14

valence

Re : Pinnacle PCTV USB Stick et ubuntu

:(je viens d'acheter la pinnacle pctv usb stick j'ai installé les pilotes et elle
ne fonctionne pas quand j'effectue la recherche des chaînes elle plante mon ordinateur
y a t'il une personne qui puisse me fournir le guide d'installation pour cette clé
je vous remercie par avance

#35 Le 11/07/2006, à 13:56

Galaad

Re : Pinnacle PCTV USB Stick et ubuntu

Salut,
tout fonctionne bien pour moi... enfin tout sauf le son.
Lors du branchement de ma clé, il me reconnait ma clé us

[17180282.480000] EEPROM ID= 0x9567eb1a
[17180282.480000] Vendor/Product ID= eb1a:2870
[17180282.480000] No audio on board.
[17180282.480000] 500mA max power
[17180282.480000] Table at 0x04, strings=0x226a, 0x0000, 0x0000
[17180282.480000] DVB Init
[17180282.528000] zl10353: device found!
[17180282.804000] DVB: registering new adapter (em2880 DVB-T).
[17180282.804000] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[17180282.804000] em28xx #0: Found Pinnacle PCTV DVB-T

Mais je lis bien No audio on board et en effet pas de son à bord!! wink
J'ai un portable latitude D505.
Si vous savez comment faire you're welcome
Merci bcp.

#36 Le 11/07/2006, à 16:08

Galaad

Re : Pinnacle PCTV USB Stick et ubuntu

Autant pour moi. pour les personnes qui n'ont pas de son c'est qu'il manque des codecs : libxine-extracodecs
C'est tout ce qu'il me manquait pour avoir du son et de l'image.
Enjoy

#37 Le 16/07/2006, à 13:17

vince91

Re : Pinnacle PCTV USB Stick et ubuntu

Bonjour,

Impossible de faire fonctionner ces pilotes.
Kubuntu dapper
Noyau 2.6.15-25-686
Pinnacle PCTV Hybrid Pro Stick

J'ai essayé la compilation sur 3 machines différentes et toujours les mêmes problèmes, message " Wrong firmware provided ! "

Voici les messages dmesg du firmware :

[17179925.820000] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[17179925.820000] xc3028-tuner.c: selected videostandard PAL-B/G
[17179925.820000] xc3028-tuner.c: ANALOG Mode!
[17179925.824000] xc3028: wrong firmware provided!
[17179925.824000] tuner 6-0061: type set to 71 (Xceive xc3028)

Et le pilote ne se charge donc pas correctement :

[17179924.916000] em28xx new video device (eb1a:2881): interface 0, class 255
[17179924.916000] em28xx #0: Alternate settings: 8
[17179924.916000] em28xx #0: Alternate setting 0, max size= 0
[17179924.916000] em28xx #0: Alternate setting 1, max size= 0
[17179924.916000] em28xx #0: Alternate setting 2, max size= 1448
[17179924.916000] em28xx #0: Alternate setting 3, max size= 2048
[17179924.916000] em28xx #0: Alternate setting 4, max size= 2304
[17179924.916000] em28xx #0: Alternate setting 5, max size= 2580
[17179924.916000] em28xx #0: Alternate setting 6, max size= 2892
[17179924.916000] em28xx #0: Alternate setting 7, max size= 3072
[17179925.820000] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.136000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.140000] em28xx #0: reading from i2c device failed (error=-71)
[17179926.500000] em28xx #0: V4L2 VBI device registered as /dev/vbi1
[17179926.500000] em28xx #0: V4L2 device registered as /dev/video1
[17179926.500000] em2880-dvb.c: DVB Init
[17179926.596000] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
[17179926.596000] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[17179926.608000] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
[17179926.608000] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
[17179926.608000] em28xx #0: Found Pinnacle Hybrid Pro
[17179926.608000] em28xx audio device (eb1a:2881): interface 1, class 1

Pourriez vous m'aider car j'ai du louper un épisode SVP ?
Merci.

#38 Le 18/07/2006, à 00:07

Gouchi

Re : Pinnacle PCTV USB Stick et ubuntu

Pour la Pinnacle PCTV Hybrid Pro Stick, il faut récupérer le firmware et le placer dans /lib/firmware/.

cd /lib/firmware
sudo wget http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz
sudo tar xvzf firmware_v3.tgz

Si le firmware est présent, vérifie que le module em2880-dvb est bien chargé :

lsmod | grep em2880 #si non, modprobe em2880-dvb

Source

Dernière modification par Gouchi (Le 03/12/2006, à 13:45)

Hors ligne

#39 Le 23/07/2006, à 15:15

tomlohave

Re : Pinnacle PCTV USB Stick et ubuntu

bonjour,

j'ai une pinnacle hybride pro stick ....

j'ai fait toutes les manipulation demandées et lorsque je scan (fr-Orleans), voici ce que j'obtiens :

scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Orleans
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 610166000 0 2 0 3 1 0 0
initial transponder 674166000 0 2 0 3 1 0 0
initial transponder 690166000 0 2 0 3 1 0 0
initial transponder 714166000 0 2 0 3 1 0 0
initial transponder 810166000 0 2 0 3 1 0 0
>>> tune to: 610166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 610166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 674166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 674166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 690166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 690166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 714166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 714166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 810166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 810166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

et j'ai de plus de curieux messages dans dmesg :

usb 2-1: new full speed USB device using uhci_hcd and address 4
[17204547.128000] em28xx new video device (eb1a:2881): interface 0, class 255
[17204547.128000] em28xx #0: Alternate settings: 8
[17204547.128000] em28xx #0: Alternate setting 0, max size= 0
[17204547.128000] em28xx #0: Alternate setting 1, max size= 512
[17204547.128000] em28xx #0: Alternate setting 2, max size= 640
[17204547.128000] em28xx #0: Alternate setting 3, max size= 768
[17204547.128000] em28xx #0: Alternate setting 4, max size= 832
[17204547.128000] em28xx #0: Alternate setting 5, max size= 896
[17204547.128000] em28xx #0: Alternate setting 6, max size= 960
[17204547.128000] em28xx #0: Alternate setting 7, max size= 1020
[17204548.604000] tuner 4-0061: chip found @ 0xc2 (em28xx #0)
[17204548.604000] attach inform: detected I2C address c2
[17204548.604000] xc3028-tuner.c: selected videostandard PAL-B/G
[17204548.604000] xc3028-tuner.c: ANALOG Mode!
[17204548.640000] /home/master/v4l-dvb/v4l/em28xx-i2c.c: em28xx_gpio_write
[17204549.560000] /home/master/v4l-dvb/v4l/em28xx-i2c.c: em28xx_gpio_write
[17204550.596000] xc3028-tuner.c: Firmware uploaded
[17204551.432000] attach_inform: tvp5150 detected.
[17204551.496000] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[17204551.496000] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[17204551.496000] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[17204551.496000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[17204551.496000] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[17204551.496000] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom e0: 5a 00 55 aa 65 6b 54 03 00 17 98 01 00 00 00 00
[17204551.496000] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[17204551.496000] EEPROM ID= 0x9567eb1a
[17204551.496000] Vendor/Product ID= eb1a:2881
[17204551.496000] AC97 audio (5 sample rates)
[17204551.496000] USB Remote wakeup capable
[17204551.496000] 500mA max power
[17204551.496000] Table at 0x04, strings=0x206a, 0x006a, 0x0000
[17204551.608000] tvp5150 4-005c: tvp5150am1 detected.
[17204556.096000] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[17204556.132000] em28xx #0: V4L2 device registered as /dev/video0
[17204556.132000] em28xx-video.c: setting DVB lock
[17204556.132000] em2880-dvb.c: DVB Init
[17204556.144000] em2880-dvb.c: VIDIOC_S_MODE
[17204556.144000] xc3028-tuner.c: DIGITAL MODE!
[17204556.232000] /home/master/v4l-dvb/v4l/em28xx-i2c.c: em28xx_gpio_write
[17204557.152000] /home/master/v4l-dvb/v4l/em28xx-i2c.c: em28xx_gpio_write
[17204558.188000] xc3028-tuner.c: Firmware uploaded
[17204558.608000] xc3028-tuner.c: sending extra call for DVB-T
[17204558.608000] /home/master/v4l-dvb/v4l/em28xx-i2c.c: em28xx_gpio_write
[17204558.724000] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
[17204558.724000] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[17204558.736000] /home/master/v4l-dvb/v4l/em2880-dvb.c: em2880_mt352_init
[17204559.012000] DVB: registering new adapter (em2880 DVB-T).
[17204559.012000] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[17204559.012000] em28xx-video.c: releasing DVB lock
[17204559.012000] em28xx #0: Found Pinnacle Hybrid Pro
[17204626.412000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204626.412000] xc3028-tuner.c: sorry [16777215] bandwidth isn't supported (please report)
[17204627.912000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204627.912000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204629.416000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204630.080000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204630.080000] xc3028-tuner.c: sorry [4005765] bandwidth isn't supported (please report)
[17204631.580000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204631.580000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204633.084000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204633.760000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204633.760000] xc3028-tuner.c: sorry [4005765] bandwidth isn't supported (please report)
[17204635.264000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204635.264000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204636.760000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204637.424000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204637.424000] xc3028-tuner.c: sorry [4005766] bandwidth isn't supported (please report)
[17204638.928000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204638.928000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204640.432000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204641.112000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204641.112000] xc3028-tuner.c: sorry [4005767] bandwidth isn't supported (please report)
[17204642.608000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204642.608000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204644.112000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204644.776000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204644.776000] xc3028-tuner.c: sorry [4005768] bandwidth isn't supported (please report)
[17204646.276000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204646.276000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204647.776000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204648.440000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204648.440000] xc3028-tuner.c: sorry [4005769] bandwidth isn't supported (please report)
[17204649.940000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204649.940000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204651.440000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204652.108000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204652.108000] xc3028-tuner.c: sorry [4005770] bandwidth isn't supported (please report)
[17204653.604000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204653.604000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204655.104000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204655.772000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204655.772000] xc3028-tuner.c: sorry [4005770] bandwidth isn't supported (please report)
[17204657.280000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204657.280000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204658.780000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204659.452000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204659.452000] xc3028-tuner.c: sorry [4005771] bandwidth isn't supported (please report)
[17204660.956000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204660.956000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17204662.456000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204663.676000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204664.908000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204666.156000] em2880-dvb.c: OFDM Bandwidth not implemented
[17204667.432000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206153.560000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206153.560000] xc3028-tuner.c: sorry [16382457] bandwidth isn't supported (please report)
[17206155.060000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206155.060000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17206156.564000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206157.228000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206157.228000] xc3028-tuner.c: sorry [4006120] bandwidth isn't supported (please report)
[17206158.724000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206158.724000] xc3028-tuner.c: sorry [-862445480] bandwidth isn't supported (please report)
[17206160.220000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206160.884000] em2880-dvb.c: OFDM Bandwidth not implemented
[17206160.884000] xc3028-tuner.c: sorry [4006121] bandwidth isn't supported (please report)

une idée ?

Hors ligne

#40 Le 23/07/2006, à 15:38

Louis XVI with a gun

Re : Pinnacle PCTV USB Stick et ubuntu

je cherchais depuis 6 mois un tuner compatible linux ...
je compte me prendre un tuner  pctv hybrid pro stick  ; est ce quelqu' un pourrait me confirmer que la réception analogique fonctionne (il n' y a pas encore la TNT dans ma région et cela n' est pas pret d' arriver)

Hors ligne

#41 Le 23/07/2006, à 17:42

tomlohave

Re : Pinnacle PCTV USB Stick et ubuntu

hum , l'analogique fonctionne, mais ....

Pas en secam  sad

Pour plus de détail voir ici : http://linuxtv.org/v4lwiki/index.php/Ta … t_viewable

Hors ligne

#42 Le 23/07/2006, à 19:15

Gouchi

Re : Pinnacle PCTV USB Stick et ubuntu

Tomlohave, le problème est maintenant réglé normalement avec les derniers changements.
La révision 3527.

Attention, le périphérique ne fonctionne pas en USB 1.1 mais en USB 2.0.

Dernière modification par Gouchi (Le 23/07/2006, à 22:22)

Hors ligne

#43 Le 24/07/2006, à 08:34

tomlohave

Re : Pinnacle PCTV USB Stick et ubuntu

Merci pour l'info ...

Je viens de recompiler et plus d'erreur dans dmesg.
Maintenant c'est un probleme purement de scan, d'ailleurs certainement dû à l'USB 1.1

A voir sur une autre machine wink

Hors ligne

#44 Le 26/07/2006, à 12:36

CeReAl KiLLeR Du 77

Re : Pinnacle PCTV USB Stick et ubuntu

Wouaaa, j'ai reçu la mienne ce matin, ma pctv usb stick, j'installe comme décrit sur le forum, et elle tourne de tonnere! Juste un petit défault, je ne capte pas toute les chaines, avec une antenne de toi, ma couveture n'ai pas terrible, mon émetteur est paris, et j'habite a 80 bornes :-(

Je corrige, avec un amplificateur sur la prise sa boost. Par contre, la télécommande ne fonctionne pas, c'est normal je suppose..?

Dernière modification par CeReAl KiLLeR Du 77 (Le 26/07/2006, à 13:06)


SuperBox = Serveur (FreeBSD 7.2) (DEAD) | H²O = Serveur (FreeBSD 8.1) | Nephrotique = Desktop (Ubuntu Lucid Lynx 64 bits) | Skizophrene = Laptop (DesktopBSD 1.7/WinXP SP3) | Epileptik = Desktop (Diskless) | WRT54GL 1.1 (Openwrt Backfire 10.3 noyau 2.4) | WRT54GL 1.1 (DDWRT V24 SP1)

Hors ligne

#45 Le 26/07/2006, à 13:35

Gouchi

Re : Pinnacle PCTV USB Stick et ubuntu

Par contre, la télécommande ne fonctionne pas, c'est normal je suppose..?

Ca passe directement du moins pour le son et le "mute", après faut voir comment "binder" les touches en regardant avec xev.

Les sources pour la gestion des touches sont ici, il faut chercher ir_codes_pinnacle2

Hors ligne

#46 Le 26/07/2006, à 13:44

CeReAl KiLLeR Du 77

Re : Pinnacle PCTV USB Stick et ubuntu

Merci, je vais regarder celà.


SuperBox = Serveur (FreeBSD 7.2) (DEAD) | H²O = Serveur (FreeBSD 8.1) | Nephrotique = Desktop (Ubuntu Lucid Lynx 64 bits) | Skizophrene = Laptop (DesktopBSD 1.7/WinXP SP3) | Epileptik = Desktop (Diskless) | WRT54GL 1.1 (Openwrt Backfire 10.3 noyau 2.4) | WRT54GL 1.1 (DDWRT V24 SP1)

Hors ligne

#47 Le 26/07/2006, à 16:52

akwell

Re : Pinnacle PCTV USB Stick et ubuntu

perso j'essaye d'installer la hybride, je suis la prosedure suivante

Vous aurez besoin de :

Mercurial
Outils DVB
Kaffeine ou bien la 0.8.2-beta1 si le scan ne passe pas.

Pour cela récupérer les sources :

Code:

hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb

Installer :

Code:

cd v4l-dvb
make && sudo make install

mais j'ai un petit problème ici

akwell@akwell-ubuntu:~$ cd v4l-dvb
akwell@akwell-ubuntu:~/v4l-dvb$ make && sudo make install
make -C /home/akwell/v4l-dvb/v4l
make[1]: entrant dans le répertoire « /home/akwell/v4l-dvb/v4l »
echo "No version yet."
No version yet.
uname -r|perl -ne 'if (/^([0-9]*)\.([0-9])*\.([0-9]*)(.*)$/) { printf ("VERSION=%s\nPATCHLEVEL:=%s\nSUBLEVEL:=%s\nKERNELRELEASE:=%s.%s.%s%s\n",$1,$2,$3,$1,$2,$3,$4); };' > ./.version
make[1]: quittant le répertoire « /home/akwell/v4l-dvb/v4l »
make[1]: entrant dans le répertoire « /home/akwell/v4l-dvb/v4l »
creating symbolic links...
make -C /lib/modules/2.6.15-26-386/build SUBDIRS=/home/akwell/v4l-dvb/v4l  modules
make: Entering an unknown directory
make: *** /lib/modules/2.6.15-26-386/build: No such file or directory.  Stop.
make: Leaving an unknown directory
make[1]: *** [default] Erreur 2
make[1]: quittant le répertoire « /home/akwell/v4l-dvb/v4l »
make: *** [all] Erreur 2
akwell@akwell-ubuntu:~/v4l-dvb$

Dernière modification par akwell (Le 26/07/2006, à 18:03)

Hors ligne

#48 Le 26/07/2006, à 20:25

Gouchi

Re : Pinnacle PCTV USB Stick et ubuntu

Il faut que tu installes les headers pour ton kernel linux-headers-2.6.15-26-386 et n'oublie que tu dois copier le firmware roll

Dernière modification par Gouchi (Le 26/07/2006, à 20:27)

Hors ligne

#49 Le 26/07/2006, à 23:04

akwell

Re : Pinnacle PCTV USB Stick et ubuntu

regarde mon problème

akwell@akwell-ubuntu:~$ hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb # installes le paquet mercurial pour hg.
abort: destination 'v4l-dvb' already exists
akwell@akwell-ubuntu:~$ cd v4l-dvb/v4l_experimental/xc3028
akwell@akwell-ubuntu:~/v4l-dvb/v4l_experimental/xc3028$ gcc convert.c -o convert #
akwell@akwell-ubuntu:~/v4l-dvb/v4l_experimental/xc3028$ ./convert emBDA.sys > /lib/firmware/$(uname -r)/xceive_xc_3028.fw
bash: /lib/firmware/2.6.15-26-386/xceive_xc_3028.fw: Permission non accordée
akwell@akwell-ubuntu:~/v4l-dvb/v4l_experimental/xc3028$ sudo ./convert emBDA.sys > /lib/firmware/$(uname -r)/xceive_xc_3028.fw
bash: /lib/firmware/2.6.15-26-386/xceive_xc_3028.fw: Permission non accordée
akwell@akwell-ubuntu:~/v4l-dvb/v4l_experimental/xc3028$

Hors ligne

#50 Le 27/07/2006, à 00:48

Gouchi

Re : Pinnacle PCTV USB Stick et ubuntu

On va le faire en 2 étapes :

sudo su
./convert emBDA.sys > /lib/firmware/$(uname -r)/xceive_xc_3028.fw

je met à jour le tutoriel, toutes mes confuses.

Dernière modification par Gouchi (Le 27/07/2006, à 00:49)

Hors ligne