#1 Le 20/01/2011, à 11:08
- jr2011
Problème connexion internet [RESOLU]
Bonjour à tous,
avant toutes choses je souhaite une bonne année au forum, en espèrant voir se développer en 2011 toujours plus de logiciels et d'OS libres !
Je suis en train d'installer Ubuntu 10.10 sur une machine -un peu- ancienne ! Toute l'installation s'est déroulée correctement à partir du live CD mais je n'ai pas d'internet.
Je précise que : * ma connexion fonctionne avec windows (2 ordis connectés avec CPL)
* je suis avec une neufbox sfr
* le pc sur lequel j'ai installé Ubuntu à fonctionné en ethernet avec windows
* le cable que j'ai installé sur le pc ubuntu vient directement de la box (sans passer par le cpl) et fonctionne parfaitement avec windows
* j'ai fait un ifconfig et il ne voit que "local loopback", pas d'eth0 ou 1 (j'en ai déduit qu'il ne voyait pas la carte ethernet)
Je signale aussi que mon niveau en informatique est proche de celui de la moule ou de l'huitre et que malheureusement pour vous il faudra me dire les choses comme lorsqu'on parle à un petit enfant !
D'avance merci à tous et longue vie aux "unbuntiens" ??!!! (je ne sais pas si le terme existe...)
Dernière modification par jr2011 (Le 21/01/2011, à 12:37)
Hors ligne
#2 Le 20/01/2011, à 11:33
- Grünt
Re : Problème connexion internet [RESOLU]
Si tu fais un "ifconfig -a" et un "lspci" ça donne quoi?
Red flashing lights. I bet they mean something.
Hors ligne
#3 Le 20/01/2011, à 12:10
- jr2011
Re : Problème connexion internet [RESOLU]
ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:104 errors:0 dropped:0 overruns:0 frame:0
TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8064 (8.0 KB) TX bytes:8064 (8.0 KB)
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:0b.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax/Voice Modem (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]Dernière modification par cqfd93 (Le 24/02/2017, à 09:13)
Hors ligne
#4 Le 20/01/2011, à 12:28
- Grünt
Re : Problème connexion internet [RESOLU]
Tu n'as pas de carte réseau.
00:0b.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax/Voice Modem (rev 01)Ça, c'est une carte bas débit, tu ne peux pas brancher un réseau Ethernet dessus.
Te faudrait une carte réseau, une vraie.
J'en ai en rab, t'habites dans quel coin? 
Red flashing lights. I bet they mean something.
Hors ligne
#5 Le 20/01/2011, à 12:52
- jr2011
Re : Problème connexion internet [RESOLU]
ce qui est étrange, c'est que ce pc a fonctionné sous windows avec une livebox branchée sur cette carte!
Hors ligne
#6 Le 20/01/2011, à 12:53
- Grünt
Re : Problème connexion internet [RESOLU]
Pourtant elle n'apparaît pas avec lspci.
Tu peux prendre une photo?
Red flashing lights. I bet they mean something.
Hors ligne
#7 Le 20/01/2011, à 14:09
- jr2011
Re : Problème connexion internet [RESOLU]
j'ai une photo mais peut on la poster sur le forum ?
Hors ligne
#8 Le 20/01/2011, à 14:12
- jr2011
Re : Problème connexion internet [RESOLU]
voila la photo en question
Hors ligne
#9 Le 20/01/2011, à 15:26
- Grünt
Re : Problème connexion internet [RESOLU]
Ben si, c'est une carte réseau ça. Elle n'a pas l'air reconnue: c'est une carte Realtek (reconnaissable à son logo), et il n'y a pas de Realtek dans ton lspci.
Essaie de la brancher sur un autre port...
Est-ce que la diode de la carte réseau s'allume quand tu branches le câble (en le laissant branché de l'autre côté, bien entendu)?
Red flashing lights. I bet they mean something.
Hors ligne
#10 Le 20/01/2011, à 17:10
- jr2011
Re : Problème connexion internet [RESOLU]
oui, tout à fait, la diode s'allume correctement mais toujours rien, même en changeant de port
Hors ligne
#11 Le 20/01/2011, à 17:14
- Grünt
Re : Problème connexion internet [RESOLU]
Fais un
sudo update-pciidsPuis retente un:
lspciPour voir.
Red flashing lights. I bet they mean something.
Hors ligne
#12 Le 20/01/2011, à 17:29
- jr2011
Re : Problème connexion internet [RESOLU]
update fait mmais resultat de lspci identique
Hors ligne
#13 Le 20/01/2011, à 17:33
- openstar
Re : Problème connexion internet [RESOLU]
je dis ptet une connerie (quoique je ne pense pas) mais il me semble que si la carte n est pas reconnue s est qu il manque le driver ...
le driver
Dernière modification par openstar (Le 20/01/2011, à 17:37)
Hors ligne
#14 Le 20/01/2011, à 17:37
- Grünt
Re : Problème connexion internet [RESOLU]
Même sans driver, elle devrait être vue par le système.
Ré-essaie avec un:
lspci -vvvUtilise la balise "code" 
Red flashing lights. I bet they mean something.
Hors ligne
#15 Le 20/01/2011, à 17:37
- jr2011
Re : Problème connexion internet [RESOLU]
oui mais elle était reconnue sous windows
Hors ligne
#16 Le 20/01/2011, à 17:38
- openstar
Re : Problème connexion internet [RESOLU]
up. j ai modifié le post precedent pour un lien vers le driver
Hors ligne
#17 Le 20/01/2011, à 17:48
- jr2011
Re : Problème connexion internet [RESOLU]
resultat pour lspci -vvv
lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: bfc00000-cfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: i2c-sis630
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
Kernel modules: i2c-sis96x
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems K7S5A motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems K7S5A motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_sis
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
Subsystem: C-Media Electronics Inc CMI9739(A) on ECS K7SOM+ motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=64]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA controller])
Subsystem: C.P. Technology Co. Ltd Device 2030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at b800 [size=256]
Region 2: Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, radeonfbDernière modification par cqfd93 (Le 24/02/2017, à 09:14)
Hors ligne
#18 Le 20/01/2011, à 17:54
- Grünt
Re : Problème connexion internet [RESOLU]
T'es certain qu'elle est bien branchée ta carte réseau, branchée correctement sur un port PCI?
Parce que là, on ne la voit pas du tout. Comme si elle était foutue. C'est très étrange.
Red flashing lights. I bet they mean something.
Hors ligne
#19 Le 20/01/2011, à 17:59
- jr2011
Re : Problème connexion internet [RESOLU]
ben oui, d'autant plus sur que sinon la diode verte ne s'allumerait pas.
Hors ligne
#20 Le 20/01/2011, à 18:21
- Grünt
Re : Problème connexion internet [RESOLU]
Tu peux lire le modèle de la carte, sur la puce où y'a le logo?
On va tenter de modprober le bon module et de lire ce qui passe dans dmesg à ce moment-là.
Red flashing lights. I bet they mean something.
Hors ligne
#21 Le 20/01/2011, à 18:31
- jr2011
Re : Problème connexion internet [RESOLU]
j'ai refait une photo plus rapprochée parcequ'il y a 2 puces
Hors ligne
#22 Le 20/01/2011, à 18:35
- jr2011
Re : Problème connexion internet [RESOLU]
bon, c'est illisible, voici les infos des 2 puces
* puce MNC : G4205SG
0721
* puce RMC : RTL 8169SC
6C18253
G706 TAIWAN
Hors ligne
#23 Le 20/01/2011, à 20:31
- Grünt
Re : Problème connexion internet [RESOLU]
Une R8169, ok.
Ça donne quoi si tu fais "sudo modprobe r8169", et ensuite "sudo dmesg"?
Red flashing lights. I bet they mean something.
Hors ligne
#24 Le 20/01/2011, à 21:02
- jr2011
Re : Problème connexion internet [RESOLU]
voici le resultat de sudodmesg:
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36416 r0 d20928 u4194304
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=be54da23-10bb-4ba0-9f3d-7b39a1debf86 ro quiet splash
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1310080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (40 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [000b5f0000 - 000c034000] RAMDISK
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #5 [00009a1000 - 00009a4294] BRK
[ 0.000000] #6 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #7 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #8 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #9 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #10 [0001001000 - 0001201000] BOOTMEM
[ 0.000000] #11 [0001201000 - 0001201004] BOOTMEM
[ 0.000000] #12 [0001201040 - 0001201100] BOOTMEM
[ 0.000000] #13 [0001201100 - 0001201118] BOOTMEM
[ 0.000000] #14 [0001201140 - 0001201d40] BOOTMEM
[ 0.000000] #15 [0001201d40 - 0001201e74] BOOTMEM
[ 0.000000] #16 [0001201e80 - 0001201ec0] BOOTMEM
[ 0.000000] #17 [0001201ec0 - 0001201f00] BOOTMEM
[ 0.000000] #18 [0001201f00 - 0001201f40] BOOTMEM
[ 0.000000] #19 [0001201f40 - 0001201f80] BOOTMEM
[ 0.000000] #20 [0001201f80 - 0001201fc0] BOOTMEM
[ 0.000000] #21 [0001201fc0 - 0001202000] BOOTMEM
[ 0.000000] #22 [0001202000 - 0001202040] BOOTMEM
[ 0.000000] #23 [0001202040 - 0001202080] BOOTMEM
[ 0.000000] #24 [0001202080 - 00012020c0] BOOTMEM
[ 0.000000] #25 [00012020c0 - 0001202100] BOOTMEM
[ 0.000000] #26 [0001202100 - 0001202110] BOOTMEM
[ 0.000000] #27 [0001202140 - 00012021aa] BOOTMEM
[ 0.000000] #28 [00012021c0 - 000120222a] BOOTMEM
[ 0.000000] #29 [0001400000 - 000140e000] BOOTMEM
[ 0.000000] #30 [0001204240 - 0001204244] BOOTMEM
[ 0.000000] #31 [0001204280 - 0001204284] BOOTMEM
[ 0.000000] #32 [00012042c0 - 00012042c4] BOOTMEM
[ 0.000000] #33 [0001204300 - 0001204304] BOOTMEM
[ 0.000000] #34 [0001204340 - 00012043f0] BOOTMEM
[ 0.000000] #35 [0001204400 - 00012044a8] BOOTMEM
[ 0.000000] #36 [0001202240 - 0001203240] BOOTMEM
[ 0.000000] #37 [00012044c0 - 00012244c0] BOOTMEM
[ 0.000000] #38 [00012244c0 - 00012344c0] BOOTMEM
[ 0.000000] #39 [0001235000 - 0001374d80] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 238644k/262080k available (4928k kernel code, 22984k reserved, 2336k data, 684k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1194.970 MHz processor.
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 2389.94 BogoMIPS (lpj=4779880)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.004102] Security Framework initialized
[ 0.004174] AppArmor: AppArmor initialized
[ 0.004180] Yama: becoming mindful.
[ 0.008149] Mount-cache hash table entries: 512
[ 0.008544] Initializing cgroup subsys ns
[ 0.008559] Initializing cgroup subsys cpuacct
[ 0.008571] Initializing cgroup subsys memory
[ 0.008595] Initializing cgroup subsys devices
[ 0.008603] Initializing cgroup subsys freezer
[ 0.008610] Initializing cgroup subsys net_cls
[ 0.008689] mce: CPU supports 4 MCE banks
[ 0.008750] Performance Events:
[ 0.008758] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008764] no hardware sampling interrupt available.
[ 0.008770] AMD PMU driver.
[ 0.008810] ... version: 0
[ 0.008815] ... bit width: 48
[ 0.008820] ... generic registers: 4
[ 0.008825] ... value mask: 0000ffffffffffff
[ 0.008831] ... max period: 00007fffffffffff
[ 0.008836] ... fixed-purpose events: 0
[ 0.008841] ... event mask: 000000000000000f
[ 0.010321] SMP alternatives: switching to UP code
[ 0.024896] Freeing SMP alternatives: 24k freed
[ 0.024990] ACPI: Core revision 20100428
[ 0.033687] ACPI: setting ELCR to 0200 (from 0820)
[ 0.034502] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.034523] ftrace: allocating 21758 entries in 43 pages
[ 0.040295] weird, boot CPU (#0) not listed by the BIOS.
[ 0.040304] SMP motherboard not detected.
[ 0.040310] Local APIC not detected. Using dummy APIC emulation.
[ 0.040313] SMP disabled
[ 0.044727] Brought up 1 CPUs
[ 0.044738] Total of 1 processors activated (2389.94 BogoMIPS).
[ 0.045577] devtmpfs: initialized
[ 0.048539] regulator: core version 0.5
[ 0.048601] Time: 19:55:59 Date: 01/20/11
[ 0.048733] NET: Registered protocol family 16
[ 0.049077] EISA bus registered
[ 0.049114] ACPI: bus type pci registered
[ 0.050979] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[ 0.050985] PCI: Using configuration type 1 for base access
[ 0.053503] bio: create slab <bio-0> at 0
[ 0.054904] ACPI: EC: Look up EC in DSDT
[ 0.062691] ACPI: Interpreter enabled
[ 0.062708] ACPI: (supports S0 S1 S4 S5)
[ 0.062755] ACPI: Using PIC for interrupt routing
[ 0.072514] ACPI: Power Resource [URP1] (off)
[ 0.072575] ACPI: Power Resource [URP2] (off)
[ 0.072627] ACPI: Power Resource [FDDP] (off)
[ 0.072679] ACPI: Power Resource [LPTP] (off)
[ 0.072935] ACPI: No dock devices found.
[ 0.072950] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.073683] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.074089] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.074096] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.074103] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.074108] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
[ 0.074114] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffdfffff] (ignored)
[ 0.074120] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[ 0.074170] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff]
[ 0.074347] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.074405] pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f]
[ 0.074451] pci 0000:00:02.2: reg 10: [mem 0xcfffe000-0xcfffefff]
[ 0.074530] pci 0000:00:02.3: reg 10: [mem 0xcffff000-0xcfffffff]
[ 0.074614] pci 0000:00:02.5: reg 20: [io 0xff00-0xff0f]
[ 0.074672] pci 0000:00:02.7: reg 10: [io 0xdc00-0xdcff]
[ 0.074682] pci 0000:00:02.7: reg 14: [io 0xd800-0xd83f]
[ 0.074731] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.074740] pci 0000:00:02.7: PME# disabled
[ 0.074796] pci 0000:00:0f.0: reg 10: [io 0xd400-0xd4ff]
[ 0.074806] pci 0000:00:0f.0: reg 14: [mem 0xcfffdf00-0xcfffdfff]
[ 0.074836] pci 0000:00:0f.0: reg 30: [mem 0xcffc0000-0xcffdffff pref]
[ 0.074859] pci 0000:00:0f.0: supports D1 D2
[ 0.074864] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot
[ 0.074870] pci 0000:00:0f.0: PME# disabled
[ 0.074952] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
[ 0.074961] pci 0000:01:00.0: reg 14: [io 0xb800-0xb8ff]
[ 0.074971] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.074993] pci 0000:01:00.0: reg 30: [mem 0xcfec0000-0xcfedffff pref]
[ 0.075021] pci 0000:01:00.0: supports D1 D2
[ 0.075069] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.075077] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.075085] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.075093] pci 0000:00:01.0: bridge window [mem 0xbfc00000-0xcfcfffff pref]
[ 0.075107] pci_bus 0000:00: on NUMA node 0
[ 0.075118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.077831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.078042] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.078240] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.078434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.078626] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.078820] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.079012] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.079207] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.079292] HEST: Table is not found!
[ 0.079556] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.079562] vgaarb: loaded
[ 0.080118] SCSI subsystem initialized
[ 0.080357] libata version 3.00 loaded.
[ 0.080535] usbcore: registered new interface driver usbfs
[ 0.080564] usbcore: registered new interface driver hub
[ 0.080664] usbcore: registered new device driver usb
[ 0.081125] ACPI: WMI: Mapper loaded
[ 0.081135] PCI: Using ACPI for IRQ routing
[ 0.081149] PCI: pci_cache_line_size set to 32 bytes
[ 0.081239] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.081247] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[ 0.081550] NetLabel: Initializing
[ 0.081555] NetLabel: domain hash size = 128
[ 0.081559] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.081597] NetLabel: unlabeled traffic allowed by default
[ 0.081746] Switching to clocksource tsc
[ 0.106263] AppArmor: AppArmor Filesystem Enabled
[ 0.106329] pnp: PnP ACPI init
[ 0.106391] ACPI: bus type pnp registered
[ 0.107137] ERROR: Unable to locate IOAPIC for GSI 8
[ 0.107256] ERROR: Unable to locate IOAPIC for GSI 13
[ 0.107427] ERROR: Unable to locate IOAPIC for GSI 12
[ 0.107493] ERROR: Unable to locate IOAPIC for GSI 1
[ 0.107884] ERROR: Unable to locate IOAPIC for GSI 6
[ 0.108774] ERROR: Unable to locate IOAPIC for GSI 4
[ 0.109651] ERROR: Unable to locate IOAPIC for GSI 3
[ 0.110865] ERROR: Unable to locate IOAPIC for GSI 7
[ 0.112563] ERROR: Unable to locate IOAPIC for GSI 10
[ 0.113166] pnp: PnP ACPI: found 13 devices
[ 0.113172] ACPI: ACPI bus type pnp unregistered
[ 0.113186] PnPBIOS: Disabled by ACPI PNP
[ 0.151400] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.151415] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.151427] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.151436] pci 0000:00:01.0: bridge window [mem 0xbfc00000-0xcfcfffff pref]
[ 0.151464] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.151469] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.151475] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.151480] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.151486] pci_bus 0000:01: resource 2 [mem 0xbfc00000-0xcfcfffff pref]
[ 0.151619] NET: Registered protocol family 2
[ 0.151778] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.152229] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.152462] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.152723] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.152729] TCP reno registered
[ 0.152739] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.152778] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.153051] NET: Registered protocol family 1
[ 0.153218] pci 0000:01:00.0: Boot video device
[ 0.153226] PCI: CLS 32 bytes, default 32
[ 0.153832] cpufreq-nforce2: No nForce2 chipset.
[ 0.153899] Scanning for low memory corruption every 60 seconds
[ 0.154293] audit: initializing netlink socket (disabled)
[ 0.154347] type=2000 audit(1295553359.152:1): initialized
[ 0.172730] Trying to unpack rootfs image as initramfs...
[ 0.195252] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.202837] VFS: Disk quotas dquot_6.5.2
[ 0.203129] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.204752] fuse init (API version 7.14)
[ 0.205033] msgmni has been set to 466
[ 0.218895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.218907] io scheduler noop registered
[ 0.218911] io scheduler deadline registered
[ 0.218937] io scheduler cfq registered (default)
[ 0.219252] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.219307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.219774] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.219805] ACPI: Sleep Button [SLPB]
[ 0.219929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.219937] ACPI: Power Button [PWRF]
[ 0.220154] ACPI: acpi_idle registered with cpuidle
[ 0.224381] ERST: Table is not found!
[ 0.225087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.225298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.225472] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.226035] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.226365] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.229089] brd: module loaded
[ 0.234444] isapnp: Scanning for PnP cards...
[ 0.240327] loop: module loaded
[ 0.241028] pata_sis 0000:00:02.5: version 0.5.2
[ 0.289835] scsi0 : pata_sis
[ 0.290345] scsi1 : pata_sis
[ 0.292006] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 0.292016] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 0.293019] Fixed MDIO Bus: probed
[ 0.293110] PPP generic driver version 2.4.2
[ 0.293364] tun: Universal TUN/TAP device driver, 1.6
[ 0.293370] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.293610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.293672] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.294155] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.294164] PCI: setting IRQ 11 as level-triggered
[ 0.294258] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.298325] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 0.298587] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 0.298658] ohci_hcd 0000:00:02.2: irq 11, io mem 0xcfffe000
[ 0.384889] hub 1-0:1.0: USB hub found
[ 0.384913] hub 1-0:1.0: 3 ports detected
[ 0.385506] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.385520] ohci_hcd 0000:00:02.3: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.385574] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 0.385812] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 0.385872] ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000
[ 0.472270] hub 2-0:1.0: USB hub found
[ 0.472293] hub 2-0:1.0: 3 ports detected
[ 0.472473] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.472722] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.473157] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.473191] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.473588] mice: PS/2 mouse device common for all mice
[ 0.474093] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.474134] rtc0: alarms up to one month, 114 bytes nvram
[ 0.474493] device-mapper: uevent: version 1.0.3
[ 0.478570] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.482611] device-mapper: multipath: version 1.1.1 loaded
[ 0.482626] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.486008] EISA: Probing bus 0 at eisa.0
[ 0.486071] EISA: Detected 0 cards.
[ 0.490061] cpuidle: using governor ladder
[ 0.490072] cpuidle: using governor menu
[ 0.490854] TCP cubic registered
[ 0.491250] NET: Registered protocol family 10
[ 0.492010] lo: Disabled Privacy Extensions
[ 0.492479] NET: Registered protocol family 17
[ 0.492685] powernow-k8: Processor cpuid 671 not supported
[ 0.492752] Using IPI No-Shortcut mode
[ 0.493071] PM: Resume from disk failed.
[ 0.493105] registered taskstats version 1
[ 0.493347] Magic number: 11:378:951
[ 0.493459] tty tty8: hash matches
[ 0.493577] rtc_cmos 00:02: setting system clock to 2011-01-20 19:56:00 UTC (1295553360)
[ 0.493585] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.493589] EDD information not available.
[ 0.495405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.682945] ata1.00: ATA-5: IC35L040AVVA07-0, VA2OA52A, max UDMA/100
[ 0.682957] ata1.00: 80418240 sectors, multi 16: LBA
[ 0.683016] ata1.01: ATAPI: Memorex DVD-MAXX 1648 AJ, GWH2, max UDMA/33
[ 0.746746] ata1.00: configured for UDMA/100
[ 0.755145] ata1.01: configured for UDMA/33
[ 0.922351] isapnp: No Plug & Play device found
[ 0.922820] scsi 0:0:0:0: Direct-Access ATA IC35L040AVVA07-0 VA2O PQ: 0 ANSI: 5
[ 0.923357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.924111] scsi 0:0:1:0: CD-ROM Memorex DVD-MAXX 1648 AJ GWH2 PQ: 0 ANSI: 5
[ 0.925801] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 0.925819] Uniform CD-ROM driver Revision: 3.20
[ 0.926304] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.926512] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.927042] sd 0:0:0:0: [sda] 80418240 512-byte logical blocks: (41.1 GB/38.3 GiB)
[ 0.927186] sd 0:0:0:0: [sda] Write Protect is off
[ 0.927194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.927252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.927773] sda: sda1 sda2 < sda5 >
[ 0.959805] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.265643] Freeing initrd memory: 10512k freed
[ 1.310226] Freeing unused kernel memory: 684k freed
[ 1.313349] Write protecting the kernel text: 4932k
[ 1.313413] Write protecting the kernel read-only data: 1976k
[ 1.390066] udev[67]: starting version 163
[ 1.509931] sr0: CDROM (ioctl) error, command: Xdread, Read track info 52 01 00 00 00 01 00 00 08 00
[ 1.509958] sr: Sense Key : Medium Error [current]
[ 1.509966] sr: Add. Sense: Unable to recover table-of-contents
[ 2.119998] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.130900] Floppy drive(s): fd0 is 1.44M
[ 2.159661] r8169 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.159731] r8169 0000:00:0f.0: (unregistered net_device): no PCI Express capability
[ 2.160957] r8169 0000:00:0f.0: eth0: RTL8169sb/8110sb at 0xd085ef00, 00:0c:76:65:0e:de, XID 10000000 IRQ 11
[ 2.166554] FDC 0 is a post-1991 82077
[ 2.425097] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.539615] Adding 728060k swap on /dev/sda5. Priority:-1 extents:1 across:728060k
[ 11.627183] udev[263]: starting version 163
[ 12.013748] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[ 12.037647] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 12.037665] ACPI: resource 0000:00:02.1 [io 0x0c00-0x0c1f] conflicts with ACPI region SMRG [??? 0x00000c00-0x00000c1f flags 0x47]
[ 12.037671] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.130749] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.320101] lp: driver loaded but no devices found
[ 12.564205] Linux agpgart interface v0.103
[ 12.595125] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.741325] parport_pc 00:0a: reported by Plug and Play ACPI
[ 12.741401] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 12.843180] lp0: using parport0 (interrupt-driven).
[ 12.935917] agpgart-sis 0000:00:00.0: SiS chipset [1039/0735]
[ 13.123640] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 13.243039] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 641kHz
[ 13.276938] psmouse serio1: ID: 10 00 64
[ 13.859629] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 13.924172] type=1400 audit(1295553373.926:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=473 comm="apparmor_parser"
[ 13.924913] type=1400 audit(1295553373.930:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
[ 13.925311] type=1400 audit(1295553373.930:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[ 14.456244] ppdev: user-space parallel port driver
[ 14.719855] [drm] Initialized drm 1.1.0 20060810
[ 15.969714] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 15.969732] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 16.036351] [drm] radeon defaulting to kernel modesetting.
[ 16.036368] [drm] radeon kernel modesetting enabled.
[ 16.036956] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 16.036966] PCI: setting IRQ 5 as level-triggered
[ 16.036977] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 16.112225] [drm] initializing kernel modesetting (RV100 0x1002:0x5159).
[ 16.116435] type=1400 audit(1295553376.122:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=689 comm="apparmor_parser"
[ 16.124342] [drm] register mmio base: 0xCFEF0000
[ 16.124352] [drm] register mmio size: 65536
[ 16.124890] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[ 16.124939] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[ 16.124979] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 16.124988] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF
[ 16.125004] radeon 0000:01:00.0: VRAM: 64M 0xC0000000 - 0xC3FFFFFF (64M used)
[ 16.179595] type=1400 audit(1295553376.182:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=691 comm="apparmor_parser"
[ 16.192747] type=1400 audit(1295553376.198:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[ 16.193177] type=1400 audit(1295553376.198:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[ 16.388154] intel8x0_measure_ac97_clock: measured 55105 usecs (2651 samples)
[ 16.388165] intel8x0: clocking to 48000
[ 16.432346] type=1400 audit(1295553376.438:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=693 comm="apparmor_parser"
[ 16.504220] [drm] radeon: irq initialized.
[ 16.504401] [drm] Detected VRAM RAM=64M, BAR=128M
[ 16.504413] [drm] RAM width 64bits SDR
[ 16.510684] [TTM] Zone kernel: Available graphics memory: 124932 kiB.
[ 16.510694] [TTM] Initializing pool allocator.
[ 16.510767] [drm] radeon: 64M of VRAM memory ready
[ 16.510774] [drm] radeon: 64M of GTT memory ready.
[ 16.570554] type=1400 audit(1295553376.574:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=693 comm="apparmor_parser"
[ 16.594607] type=1400 audit(1295553376.598:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=693 comm="apparmor_parser"
[ 16.652945] [drm] Loading R100 Microcode
[ 16.709516] [drm] radeon: ring at 0x00000000D0000000
[ 16.709549] [drm] ring test succeeded in 0 usecs
[ 16.710061] [drm] radeon: ib pool ready.
[ 16.710278] [drm] ib test succeeded in 0 usecs
[ 16.710673] [drm] Default TV standard: PAL
[ 16.710679] [drm] 27.000000000 MHz TV ref clk
[ 16.710690] [drm] Default TV standard: PAL
[ 16.710693] [drm] 27.000000000 MHz TV ref clk
[ 16.710772] [drm] Radeon Display Connectors
[ 16.710776] [drm] Connector 0:
[ 16.710780] [drm] VGA
[ 16.710786] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 16.710789] [drm] Encoders:
[ 16.710794] [drm] CRT1: INTERNAL_DAC1
[ 16.710797] [drm] Connector 1:
[ 16.710800] [drm] S-video
[ 16.710803] [drm] Encoders:
[ 16.710806] [drm] TV1: INTERNAL_DAC2
[ 16.864816] [drm] fb mappable at 0xC0040000
[ 16.864827] [drm] vram apper at 0xC0000000
[ 16.864832] [drm] size 3145728
[ 16.864836] [drm] fb depth is 24
[ 16.864839] [drm] pitch is 4096
[ 17.051728] r8169 0000:00:0f.0: eth0: link up
[ 17.118553] Console: switching to colour frame buffer device 128x48
[ 17.134406] fb0: radeondrmfb frame buffer device
[ 17.134411] drm: registered panic notifier
[ 17.140853] Slow work thread pool: Starting up
[ 17.141075] Slow work thread pool: Ready
[ 17.141112] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 22.759265] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 26.935603] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.728110] eth0: no IPv6 routers present
[ 40.189011] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 40.284518] ISO 9660 Extensions: RRIP_1991ADernière modification par cqfd93 (Le 24/02/2017, à 09:14)
Hors ligne
#25 Le 20/01/2011, à 22:05
- Grünt
Re : Problème connexion internet [RESOLU]
Héhé!
Et
ifconfig -amaintenant?
Red flashing lights. I bet they mean something.
Hors ligne