Ubuntu-fr

Traabh48

Boot lent

Bonjour

J'ai installé Ubuntu 6.06 Desktop sur un PC de bureau Acer Aspire E360 équipé d'une carte graphique Nvidia Geofrce 7300 GS.

Je précise que j'ai désactivé le boot graphique pour un boot en mode texte. (pas de splash)
Quand je fais Entrée pour selectionner Ubuntu dans grub il m'affiche quelques lignes de code (Uncompressing Linux... et autres) Puis il s'arrete pendant 15 secondes et ne fais plus rien, puis demarre enfin le chargement (vous savez les lignes suivies d'un OK (ou d'un failed )).

Voila, j'aimerais donc savoir comment éviter cette attente de 15 secondes qui peut se reveler assez pénible (surtout quand je montre Ubuntu a des copains ca fait pas super). Je précise qu'il ny'a aucune erreur au boot.

Au passage, quand je suis au boot graphique il affiche très vite les lignes Uncompressing Linux.... et autres, puis il passe en graphique avec le logo et la il ne demarre pas pendant 15 secondes puis ensuite ca charge (meme chose qu'en texte)

Merci

gene69

Re : Boot lent

et bien ton probleme est clair: ce n'est pas la faute à l'affichage.

Si tu es courageux fouille les journaux, c'est probablement un pilote ou une carte réseau qui n'arrive pas à démarer.

Dernière modification par gene69 (Le 22/08/2006, à 23:06)

---

Quand le berger est lâche, le loup chie de la laine.
A (draft) guide to UFO Alien-Invasion

Traabh48

Re : Boot lent

merci mais comment consulter les journaux systemes ?

kornwall

Re : Boot lent

system -> administration -> visionneur de journaux system

---

Golom golom

Traabh48

Re : Boot lent

merci

voici mon journal ssyteme juste apres avoir demarré:

Aug 23 20:59:48 localhost syslogd 1.4.1#17ubuntu7: restart.
Aug 23 20:59:48 localhost kernel: Inspecting /boot/System.map-2.6.15-26-k7
Aug 23 20:59:48 localhost kernel: Loaded 23250 symbols from /boot/System.map-2.6.15-26-k7.
Aug 23 20:59:48 localhost kernel: Symbols match kernel version 2.6.15.
Aug 23 20:59:48 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Aug 23 20:59:48 localhost kernel: [17179569.184000] Linux version 2.6.15-26-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:40:32 UTC 2006
Aug 23 20:59:48 localhost kernel: [17179569.184000] BIOS-provided physical RAM map:
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Aug 23 20:59:48 localhost kernel: [17179569.184000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 23 20:59:48 localhost kernel: [17179569.184000] 126MB HIGHMEM available.
Aug 23 20:59:48 localhost kernel: [17179569.184000] 896MB LOWMEM available.
Aug 23 20:59:48 localhost kernel: [17179569.184000] found SMP MP-table at 000f39d0
Aug 23 20:59:48 localhost kernel: [17179569.184000] DMI 2.2 present.
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x1008
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 23 20:59:48 localhost kernel: [17179569.184000] Processor #0 15:3 APIC version 16
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 23 20:59:48 localhost kernel: [17179569.184000] Processor #1 15:3 APIC version 16
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 23 20:59:48 localhost kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Aug 23 20:59:48 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Aug 23 20:59:48 localhost kernel: [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Aug 23 20:59:48 localhost kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Aug 23 20:59:48 localhost kernel: [17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
Aug 23 20:59:48 localhost kernel: [17179569.184000] Built 1 zonelists
Aug 23 20:59:48 localhost kernel: [17179569.184000] Kernel command line: root=/dev/sda5 ro resume=/dev/hda5 quiet
Aug 23 20:59:48 localhost kernel: [17179569.184000] Initializing CPU#0
Aug 23 20:59:48 localhost kernel: [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
Aug 23 20:59:48 localhost kernel: [17179569.184000] Detected 1004.653 MHz processor.
Aug 23 20:59:48 localhost kernel: [17179569.184000] Using pmtmr for high-res timesource
Aug 23 20:59:48 localhost kernel: [17179569.184000] Console: colour VGA+ 80x25
Aug 23 20:59:48 localhost kernel: [17179570.888000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 23 20:59:48 localhost kernel: [17179570.888000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 23 20:59:48 localhost kernel: [17179570.924000] Memory: 1026200k/1047488k available (2103k kernel code, 20560k reserved, 600k data, 332k init, 129984k highmem)
Aug 23 20:59:48 localhost kernel: [17179570.924000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 23 20:59:48 localhost kernel: [17179571.004000] Calibrating delay using timer specific routine.. 2012.53 BogoMIPS (lpj=4025065)
Aug 23 20:59:48 localhost kernel: [17179571.004000] Security Framework v1.0.0 initialized
Aug 23 20:59:48 localhost kernel: [17179571.004000] SELinux:  Disabled at boot.
Aug 23 20:59:48 localhost kernel: [17179571.004000] Mount-cache hash table entries: 512
Aug 23 20:59:48 localhost kernel: [17179571.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 20:59:48 localhost kernel: [17179571.004000] CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 20:59:48 localhost kernel: [17179571.004000] CPU 0(2) -> Core 0
Aug 23 20:59:48 localhost kernel: [17179571.004000] mtrr: v2.0 (20020519)
Aug 23 20:59:48 localhost kernel: [17179571.004000] Enabling fast FPU save and restore... done.
Aug 23 20:59:48 localhost kernel: [17179571.004000] Enabling unmasked SIMD FPU exception support... done.
Aug 23 20:59:48 localhost kernel: [17179571.004000] Checking 'hlt' instruction... OK.
Aug 23 20:59:48 localhost kernel: [17179571.020000] SMP alternatives: switching to UP code
Aug 23 20:59:48 localhost kernel: [17179571.020000] checking if image is initramfs... it is
Aug 23 20:59:48 localhost kernel: [17179572.012000] Freeing initrd memory: 6763k freed
Aug 23 20:59:48 localhost kernel: [17179572.024000] ACPI: Looking for DSDT ... not found!
Aug 23 20:59:48 localhost kernel: [17179572.032000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
Aug 23 20:59:48 localhost kernel: [17179572.032000] SMP alternatives: switching to SMP code
Aug 23 20:59:48 localhost kernel: [17179572.032000] Booting processor 1/1 eip 3000
Aug 23 20:59:48 localhost kernel: [17179572.044000] Initializing CPU#1
Aug 23 20:59:48 localhost kernel: [17179572.124000] Calibrating delay using timer specific routine.. 2009.31 BogoMIPS (lpj=4018625)
Aug 23 20:59:48 localhost kernel: [17179572.124000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 20:59:48 localhost kernel: [17179572.124000] CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 20:59:48 localhost kernel: [17179572.124000] CPU 1(2) -> Core 1
Aug 23 20:59:48 localhost kernel: [17179572.124000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
Aug 23 20:59:48 localhost kernel: [17179572.124000] Total of 2 processors activated (4021.84 BogoMIPS).
Aug 23 20:59:48 localhost kernel: [17179572.124000] ENABLING IO-APIC IRQs
Aug 23 20:59:48 localhost kernel: [17179572.124000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Aug 23 20:59:48 localhost kernel: [17179572.272000] checking TSC synchronization across 2 CPUs: 
Aug 23 20:59:48 localhost kernel: [17179572.272000] CPU#0 had 0 usecs TSC skew, fixed it up.
Aug 23 20:59:48 localhost kernel: [17179572.272000] CPU#1 had 0 usecs TSC skew, fixed it up.
Aug 23 20:59:48 localhost kernel: [17179572.276000] Brought up 2 CPUs
Aug 23 20:59:48 localhost kernel: [17179572.276000] NET: Registered protocol family 16
Aug 23 20:59:48 localhost kernel: [17179572.276000] EISA bus registered
Aug 23 20:59:48 localhost kernel: [17179572.276000] ACPI: bus type pci registered
Aug 23 20:59:48 localhost kernel: [17179572.276000] PCI: PCI BIOS revision 3.00 entry at 0xfa7c0, last bus=4
Aug 23 20:59:48 localhost kernel: [17179572.276000] PCI: Using MMCONFIG
Aug 23 20:59:48 localhost kernel: [17179572.280000] ACPI: Subsystem revision 20051216
Aug 23 20:59:48 localhost kernel: [17179572.292000] ACPI: Interpreter enabled
Aug 23 20:59:48 localhost kernel: [17179572.292000] ACPI: Using IOAPIC for interrupt routing
Aug 23 20:59:48 localhost kernel: [17179572.292000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 23 20:59:48 localhost kernel: [17179572.304000] PCI: Transparent bridge - 0000:00:10.0
Aug 23 20:59:48 localhost kernel: [17179572.564000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.564000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.564000] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.564000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.568000] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LACI] (IRQs *5 7 9 10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.572000] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.576000] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.576000] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.576000] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.576000] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Aug 23 20:59:48 localhost kernel: [17179572.576000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.580000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.580000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.580000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.580000] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.580000] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.584000] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.584000] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.584000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.584000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.588000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.588000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.588000] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.588000] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.588000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.592000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.592000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.592000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.592000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.592000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.596000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Aug 23 20:59:48 localhost kernel: [17179572.600000] Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 23 20:59:48 localhost kernel: [17179572.600000] pnp: PnP ACPI init
Aug 23 20:59:48 localhost kernel: [17179572.612000] pnp: PnP ACPI: found 12 devices
Aug 23 20:59:48 localhost kernel: [17179572.612000] PnPBIOS: Disabled by ACPI PNP
Aug 23 20:59:48 localhost kernel: [17179572.612000] PCI: Using ACPI for IRQ routing
Aug 23 20:59:48 localhost kernel: [17179572.612000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x2000-0x207f has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] pnp: 00:00: ioport range 0x2080-0x20ff has been reserved
Aug 23 20:59:48 localhost kernel: [17179572.756000] PCI: Bridge: 0000:00:02.0
Aug 23 20:59:48 localhost kernel: [17179572.756000]   IO window: 8000-8fff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   MEM window: fdd00000-fddfffff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   PREFETCH window: fdb00000-fdbfffff
Aug 23 20:59:48 localhost kernel: [17179572.756000] PCI: Bridge: 0000:00:03.0
Aug 23 20:59:48 localhost kernel: [17179572.756000]   IO window: a000-afff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   MEM window: fda00000-fdafffff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   PREFETCH window: fde00000-fdefffff
Aug 23 20:59:48 localhost kernel: [17179572.756000] PCI: Bridge: 0000:00:04.0
Aug 23 20:59:48 localhost kernel: [17179572.756000]   IO window: 9000-9fff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   MEM window: f6000000-f8ffffff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   PREFETCH window: d0000000-dfffffff
Aug 23 20:59:48 localhost kernel: [17179572.756000] PCI: Bridge: 0000:00:10.0
Aug 23 20:59:48 localhost kernel: [17179572.756000]   IO window: b000-bfff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   MEM window: f9000000-fcffffff
Aug 23 20:59:48 localhost kernel: [17179572.756000]   PREFETCH window: fdc00000-fdcfffff
Aug 23 20:59:48 localhost kernel: [17179572.756000] audit: initializing netlink socket (disabled)
Aug 23 20:59:48 localhost kernel: [17179572.756000] audit(1156366756.752:1): initialized
Aug 23 20:59:48 localhost kernel: [17179572.756000] highmem bounce pool size: 64 pages
Aug 23 20:59:48 localhost kernel: [17179572.756000] VFS: Disk quotas dquot_6.5.1
Aug 23 20:59:48 localhost kernel: [17179572.756000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 23 20:59:48 localhost kernel: [17179572.756000] Initializing Cryptographic API
Aug 23 20:59:48 localhost kernel: [17179572.756000] io scheduler noop registered
Aug 23 20:59:48 localhost kernel: [17179572.756000] io scheduler anticipatory registered
Aug 23 20:59:48 localhost kernel: [17179572.756000] io scheduler deadline registered
Aug 23 20:59:48 localhost kernel: [17179572.756000] io scheduler cfq registered
Aug 23 20:59:48 localhost kernel: [17179580.756000] 0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
Aug 23 20:59:48 localhost kernel: [17179580.756000] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
Aug 23 20:59:48 localhost kernel: [17179580.756000] assign_interrupt_mode Found MSI capability
Aug 23 20:59:48 localhost kernel: [17179580.756000] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
Aug 23 20:59:48 localhost kernel: [17179580.756000] assign_interrupt_mode Found MSI capability
Aug 23 20:59:48 localhost kernel: [17179580.756000] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
Aug 23 20:59:48 localhost kernel: [17179580.756000] assign_interrupt_mode Found MSI capability
Aug 23 20:59:48 localhost kernel: [17179580.756000] isapnp: Scanning for PnP cards...
Aug 23 20:59:48 localhost kernel: [17179581.108000] isapnp: No Plug & Play device found
Aug 23 20:59:48 localhost kernel: [17179581.132000] Real Time Clock Driver v1.12
Aug 23 20:59:48 localhost kernel: [17179581.132000] PNP: No PS/2 controller found. Probing ports directly.
Aug 23 20:59:48 localhost kernel: [17179581.156000] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 23 20:59:48 localhost kernel: [17179581.156000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Aug 23 20:59:48 localhost kernel: [17179581.156000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 20:59:48 localhost kernel: [17179581.156000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Aug 23 20:59:48 localhost kernel: [17179581.160000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 20:59:48 localhost kernel: [17179581.160000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Aug 23 20:59:48 localhost kernel: [17179581.164000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 23 20:59:48 localhost kernel: [17179581.164000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 23 20:59:48 localhost kernel: [17179581.164000] mice: PS/2 mouse device common for all mice
Aug 23 20:59:48 localhost kernel: [17179581.164000] EISA: Probing bus 0 at eisa.0
Aug 23 20:59:48 localhost kernel: [17179581.164000] Cannot allocate resource for EISA slot 1
Aug 23 20:59:48 localhost kernel: [17179581.164000] Cannot allocate resource for EISA slot 2
Aug 23 20:59:48 localhost kernel: [17179581.164000] Cannot allocate resource for EISA slot 8
Aug 23 20:59:48 localhost kernel: [17179581.164000] EISA: Detected 0 cards.
Aug 23 20:59:48 localhost kernel: [17179581.164000] NET: Registered protocol family 2
Aug 23 20:59:48 localhost kernel: [17179581.808000] input: AT Translated Set 2 keyboard as /class/input/input0
Aug 23 20:59:48 localhost kernel: [17179581.836000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 23 20:59:48 localhost kernel: [17179581.836000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Aug 23 20:59:48 localhost kernel: [17179581.836000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Aug 23 20:59:48 localhost kernel: [17179581.836000] TCP: Hash tables configured (established 131072 bind 65536)
Aug 23 20:59:48 localhost kernel: [17179581.836000] TCP reno registered
Aug 23 20:59:48 localhost kernel: [17179581.836000] TCP bic registered
Aug 23 20:59:48 localhost kernel: [17179581.836000] NET: Registered protocol family 1
Aug 23 20:59:48 localhost kernel: [17179581.836000] NET: Registered protocol family 8
Aug 23 20:59:48 localhost kernel: [17179581.836000] NET: Registered protocol family 20
Aug 23 20:59:48 localhost kernel: [17179581.836000] Starting balanced_irq
Aug 23 20:59:48 localhost kernel: [17179581.836000] Using IPI No-Shortcut mode
Aug 23 20:59:48 localhost kernel: [17179581.836000] ACPI wakeup devices: 
Aug 23 20:59:48 localhost kernel: [17179581.836000] HUB0 XVRA XVRB XVRC USB0 USB2 AZAD MMAC MMCI UAR1 
Aug 23 20:59:48 localhost kernel: [17179581.836000] ACPI: (supports S0 S3 S4 S5)
Aug 23 20:59:48 localhost kernel: [17179581.836000] Freeing unused kernel memory: 332k freed
Aug 23 20:59:48 localhost kernel: [17179581.928000] Capability LSM initialized
Aug 23 20:59:48 localhost kernel: [17179581.988000] ACPI: Fan [FAN] (on)
Aug 23 20:59:48 localhost kernel: [17179581.996000] ACPI: Thermal Zone [THRM] (-11 C)
Aug 23 20:59:48 localhost kernel: [17179582.820000] SCSI subsystem initialized
Aug 23 20:59:48 localhost kernel: [17179582.824000] ACPI: bus type scsi registered
Aug 23 20:59:48 localhost kernel: [17179582.824000] **** SET: Misaligned resource pointer: df841f42 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179582.828000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
Aug 23 20:59:48 localhost kernel: [17179582.828000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209
Aug 23 20:59:48 localhost kernel: [17179582.828000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 209
Aug 23 20:59:48 localhost kernel: [17179582.828000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 209
Aug 23 20:59:48 localhost kernel: [17179583.196000] ata1: dev 0 ATA-6, max UDMA/100, 625142448 sectors: LBA48
Aug 23 20:59:48 localhost kernel: [17179583.220000] ata1: dev 0 configured for UDMA/100
Aug 23 20:59:48 localhost kernel: [17179583.248000] scsi0 : sata_nv
Aug 23 20:59:48 localhost kernel: [17179583.452000] ata2: no device found (phy stat 00000000)
Aug 23 20:59:48 localhost kernel: [17179583.452000] scsi1 : sata_nv
Aug 23 20:59:48 localhost kernel: [17179583.452000]   Vendor: ATA       Model: WDC WD3200JD-22K  Rev: 08.0
Aug 23 20:59:48 localhost kernel: [17179583.452000]   Type:   Direct-Access                      ANSI SCSI revision: 05
Aug 23 20:59:48 localhost kernel: [17179583.452000] **** SET: Misaligned resource pointer: df841c42 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179583.452000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
Aug 23 20:59:48 localhost kernel: [17179583.452000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 217
Aug 23 20:59:48 localhost kernel: [17179583.452000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 217
Aug 23 20:59:48 localhost kernel: [17179583.452000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 217
Aug 23 20:59:48 localhost kernel: [17179583.460000] Driver 'sd' needs updating - please use bus_type methods
Aug 23 20:59:48 localhost kernel: [17179583.460000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
Aug 23 20:59:48 localhost kernel: [17179583.460000] SCSI device sda: drive cache: write back
Aug 23 20:59:48 localhost kernel: [17179583.460000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
Aug 23 20:59:48 localhost kernel: [17179583.460000] SCSI device sda: drive cache: write back
Aug 23 20:59:48 localhost kernel: [17179583.460000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Aug 23 20:59:48 localhost kernel: [17179583.524000] sd 0:0:0:0: Attached scsi disk sda
Aug 23 20:59:48 localhost kernel: [17179583.656000] ata3: no device found (phy stat 00000000)
Aug 23 20:59:48 localhost kernel: [17179583.656000] scsi2 : sata_nv
Aug 23 20:59:48 localhost kernel: [17179583.860000] ata4: no device found (phy stat 00000000)
Aug 23 20:59:48 localhost kernel: [17179583.860000] scsi3 : sata_nv
Aug 23 20:59:48 localhost kernel: [17179583.860000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
Aug 23 20:59:48 localhost kernel: [17179583.860000] NFORCE-MCP51: chipset revision 161
Aug 23 20:59:48 localhost kernel: [17179583.860000] NFORCE-MCP51: not 100%% native mode: will probe irqs later
Aug 23 20:59:48 localhost kernel: [17179583.860000] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Aug 23 20:59:48 localhost kernel: [17179583.860000] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
Aug 23 20:59:48 localhost kernel: [17179583.860000]     ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
Aug 23 20:59:48 localhost kernel: [17179583.860000]     ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
Aug 23 20:59:48 localhost kernel: [17179585.168000] hdc: HL-DT-ST DVD-RW_GSA-H11N, ATAPI CD/DVD-ROM drive
Aug 23 20:59:48 localhost kernel: [17179585.504000] ide1 at 0x170-0x177,0x376 on irq 15
Aug 23 20:59:48 localhost kernel: [17179585.524000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Aug 23 20:59:48 localhost kernel: [17179585.524000] Uniform CD-ROM driver Revision: 3.20
Aug 23 20:59:48 localhost kernel: [17179585.712000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
Aug 23 20:59:48 localhost kernel: [17179585.716000] **** SET: Misaligned resource pointer: df841c42 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179585.716000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
Aug 23 20:59:48 localhost kernel: [17179585.716000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 225
Aug 23 20:59:48 localhost kernel: [17179585.716000] forcedeth: using HIGHDMA
Aug 23 20:59:48 localhost kernel: [17179585.748000] usbcore: registered new driver usbfs
Aug 23 20:59:48 localhost kernel: [17179585.748000] usbcore: registered new driver hub
Aug 23 20:59:48 localhost kernel: [17179585.752000] **** SET: Misaligned resource pointer: df841a02 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179585.752000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Aug 23 20:59:48 localhost kernel: [17179585.752000] ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 233
Aug 23 20:59:48 localhost kernel: [17179585.752000] **** SET: Misaligned resource pointer: df841f42 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179585.752000] ehci_hcd 0000:00:0b.1: EHCI Host Controller
Aug 23 20:59:48 localhost kernel: [17179585.752000] ehci_hcd 0000:00:0b.1: debug port 1
Aug 23 20:59:48 localhost kernel: [17179585.752000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
Aug 23 20:59:48 localhost kernel: [17179585.752000] ehci_hcd 0000:00:0b.1: irq 233, io mem 0xfe02e000
Aug 23 20:59:48 localhost kernel: [17179585.752000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 23 20:59:48 localhost kernel: [17179585.756000] hub 1-0:1.0: USB hub found
Aug 23 20:59:48 localhost kernel: [17179585.756000] hub 1-0:1.0: 8 ports detected
Aug 23 20:59:48 localhost kernel: [17179585.756000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Aug 23 20:59:48 localhost kernel: [17179585.756000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 209
Aug 23 20:59:48 localhost kernel: [17179585.756000] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Aug 23 20:59:48 localhost kernel: [17179585.860000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
Aug 23 20:59:48 localhost kernel: [17179585.860000] ohci_hcd 0000:00:0b.0: irq 209, io mem 0xfe02f000
Aug 23 20:59:48 localhost kernel: [17179585.916000] hub 2-0:1.0: USB hub found
Aug 23 20:59:48 localhost kernel: [17179585.916000] hub 2-0:1.0: 8 ports detected
Aug 23 20:59:48 localhost kernel: [17179586.236000] eth0: forcedeth.c: subsystem: 0105b:0caf bound to 0000:00:14.0
Aug 23 20:59:48 localhost kernel: [17179586.236000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
Aug 23 20:59:48 localhost kernel: [17179586.236000] **** SET: Misaligned resource pointer: f7d1ea82 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179586.236000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Aug 23 20:59:48 localhost kernel: [17179586.236000] ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50
Aug 23 20:59:48 localhost kernel: [17179586.288000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[fcfff000-fcfff7ff]  Max Packet=[2048]
Aug 23 20:59:48 localhost kernel: [17179586.468000] usb 1-6: new high speed USB device using ehci_hcd and address 4
Aug 23 20:59:48 localhost kernel: [17179586.704000] Initializing USB Mass Storage driver...
Aug 23 20:59:48 localhost kernel: [17179586.876000] scsi4 : SCSI emulation for USB Mass Storage devices
Aug 23 20:59:48 localhost kernel: [17179586.876000] usbcore: registered new driver usb-storage
Aug 23 20:59:48 localhost kernel: [17179586.876000] USB Mass Storage support registered.
Aug 23 20:59:48 localhost kernel: [17179586.952000] EXT3-fs: mounted filesystem with ordered data mode.
Aug 23 20:59:48 localhost kernel: [17179586.952000] kjournald starting.  Commit interval 5 seconds
Aug 23 20:59:48 localhost kernel: [17179587.180000] usb 2-1: new low speed USB device using ohci_hcd and address 2
Aug 23 20:59:48 localhost kernel: [17179587.700000] usb 2-5: new low speed USB device using ohci_hcd and address 3
Aug 23 20:59:48 localhost kernel: [17179588.220000] usb 2-7: new low speed USB device using ohci_hcd and address 4
Aug 23 20:59:48 localhost kernel: [17179591.904000]   Vendor: Generic   Model: 2.0 Reader-CF     Rev: 1.00
Aug 23 20:59:48 localhost kernel: [17179591.904000]   Type:   Direct-Access                      ANSI SCSI revision: 00
Aug 23 20:59:48 localhost kernel: [17179591.912000] sd 4:0:0:0: Attached scsi removable disk sdb
Aug 23 20:59:48 localhost kernel: [17179591.944000]   Vendor: Generic   Model: 2.0 Reader-SM/xD  Rev: 1.00
Aug 23 20:59:48 localhost kernel: [17179591.944000]   Type:   Direct-Access                      ANSI SCSI revision: 00
Aug 23 20:59:48 localhost kernel: [17179591.952000] sd 4:0:0:1: Attached scsi removable disk sdc
Aug 23 20:59:48 localhost kernel: [17179591.984000]   Vendor: Generic   Model: 2.0 Reader-SD     Rev: 1.00
Aug 23 20:59:48 localhost kernel: [17179591.984000]   Type:   Direct-Access                      ANSI SCSI revision: 00
Aug 23 20:59:48 localhost kernel: [17179591.992000] sd 4:0:0:2: Attached scsi removable disk sdd
Aug 23 20:59:48 localhost kernel: [17179592.024000]   Vendor: Generic   Model: 2.0 Reader-MS     Rev: 1.00
Aug 23 20:59:48 localhost kernel: [17179592.024000]   Type:   Direct-Access                      ANSI SCSI revision: 00
Aug 23 20:59:48 localhost kernel: [17179592.028000] sd 4:0:0:3: Attached scsi removable disk sde
Aug 23 20:59:48 localhost kernel: [17179593.716000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 23 20:59:48 localhost kernel: [17179593.716000] sd 4:0:0:0: Attached scsi generic sg1 type 0
Aug 23 20:59:48 localhost kernel: [17179593.716000] sd 4:0:0:1: Attached scsi generic sg2 type 0
Aug 23 20:59:48 localhost kernel: [17179593.716000] sd 4:0:0:2: Attached scsi generic sg3 type 0
Aug 23 20:59:48 localhost kernel: [17179593.716000] sd 4:0:0:3: Attached scsi generic sg4 type 0
Aug 23 20:59:48 localhost kernel: [17179595.736000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 23 20:59:48 localhost kernel: [17179595.740000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 23 20:59:48 localhost kernel: [17179596.196000] Linux agpgart interface v0.101 (c) Dave Jones
Aug 23 20:59:48 localhost kernel: [17179596.220000] nvidia: module license 'NVIDIA' taints kernel.
Aug 23 20:59:48 localhost kernel: [17179596.224000] **** SET: Misaligned resource pointer: df8414c2 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179596.224000] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
Aug 23 20:59:48 localhost kernel: [17179596.224000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 58
Aug 23 20:59:48 localhost kernel: [17179596.224000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 PDT 2006
Aug 23 20:59:48 localhost kernel: [17179596.404000] usbcore: registered new driver hiddev
Aug 23 20:59:48 localhost kernel: [17179596.460000] input: Logitech Optical USB Mouse as /class/input/input1
Aug 23 20:59:48 localhost kernel: [17179596.464000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-1
Aug 23 20:59:48 localhost kernel: [17179596.540000] input: Acer MCE Receiver as /class/input/input2
Aug 23 20:59:48 localhost kernel: [17179596.540000] input,hiddev96: USB HID v1.10 Keyboard [Acer MCE Receiver] on usb-0000:00:0b.0-5
Aug 23 20:59:48 localhost kernel: [17179596.540000] Linux video capture interface: v1.00
Aug 23 20:59:48 localhost kernel: [17179596.548000] input: CHICONY USB Keyboard as /class/input/input3
Aug 23 20:59:48 localhost kernel: [17179596.548000] input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:0b.0-7
Aug 23 20:59:48 localhost kernel: [17179596.576000] input: CHICONY USB Keyboard as /class/input/input4
Aug 23 20:59:48 localhost kernel: [17179596.576000] input,hiddev97: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:0b.0-7
Aug 23 20:59:48 localhost kernel: [17179596.576000] usbcore: registered new driver usbhid
Aug 23 20:59:48 localhost kernel: [17179596.576000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx2388x v4l2 driver version 0.0.5 loaded
Aug 23 20:59:48 localhost kernel: [17179596.864000] **** SET: Misaligned resource pointer: f79a5c02 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179596.864000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Aug 23 20:59:48 localhost kernel: [17179596.864000] ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]: Your board isn't known (yet) to the driver.  You can
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]: try to pick one of the existing card configs via
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]: card=<n> insmod option.  Updating to the latest
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]: version might help as well.
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=0 -> UNKNOWN/GENERIC
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=2 -> GDI Black Gold
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=3 -> PixelView
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=4 -> ATI TV Wonder Pro
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=6 -> AverTV Studio 303 (M126)
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=7 -> MSI TV-@nywhere Master
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=8 -> Leadtek Winfast DV2000
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=9 -> Leadtek PVR 2000
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=11 -> Prolink PlayTV PVR
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=12 -> ASUS PVR-416
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=13 -> MSI TV-@nywhere
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=16 -> KWorld LTV883RF
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=19 -> Conexant DVB-T reference design
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=20 -> Provideo PV259
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=26 -> IODATA GV/BCTV7E
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=34 -> ATI HDTV Wonder
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=35 -> WinFast DTV1000-T
Aug 23 20:59:48 localhost kernel: [17179596.864000] cx88[0]:    card=36 -> AVerTV 303 (M126)
Aug 23 20:59:48 localhost kernel: [17179596.864000] CORE cx88[0]: subsystem: 0070:9400, board: UNKNOWN/GENERIC [card=0,autodetected]
Aug 23 20:59:48 localhost kernel: [17179596.864000] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
Aug 23 20:59:48 localhost kernel: [17179596.924000] **** SET: Misaligned resource pointer: f79a5b42 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179596.924000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Aug 23 20:59:48 localhost kernel: [17179596.924000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 217
Aug 23 20:59:48 localhost kernel: [17179596.948000] input: PC Speaker as /class/input/input5
Aug 23 20:59:48 localhost kernel: [17179596.960000] FDC 0 is a post-1991 82077
Aug 23 20:59:48 localhost kernel: [17179597.072000] cx88[0]/0: found at 0000:04:07.0, rev: 5, irq: 58, latency: 32, mmio: 0xf9000000
Aug 23 20:59:48 localhost kernel: [17179597.112000] ts: Compaq touchscreen protocol output
Aug 23 20:59:48 localhost kernel: [17179597.124000] 
Aug 23 20:59:48 localhost kernel: [17179597.124000] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
Aug 23 20:59:48 localhost kernel: [17179597.124000] Copyright (c) 2004-2005, Andrea Merello
Aug 23 20:59:48 localhost kernel: [17179597.124000] rtl8180: Initializing module
Aug 23 20:59:48 localhost kernel: [17179597.124000] rtl8180: Wireless extensions version 19
Aug 23 20:59:48 localhost kernel: [17179597.124000] rtl8180: Initializing proc filesystem
Aug 23 20:59:48 localhost kernel: [17179597.148000] tuner 0-0061: chip found @ 0xc2 (cx88[0])
Aug 23 20:59:48 localhost kernel: [17179597.148000] tuner 0-0063: chip found @ 0xc6 (cx88[0])
Aug 23 20:59:48 localhost kernel: [17179597.244000] intel8x0_measure_ac97_clock: measured 54570 usecs
Aug 23 20:59:48 localhost kernel: [17179597.244000] intel8x0: clocking to 46914
Aug 23 20:59:48 localhost kernel: [17179597.284000] cx2388x dvb driver version 0.0.5 loaded
Aug 23 20:59:48 localhost kernel: [17179597.312000] parport: PnPBIOS parport detected.
Aug 23 20:59:48 localhost kernel: [17179597.312000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Aug 23 20:59:48 localhost kernel: [17179597.316000] cx88[0]/0: registered device video0 [v4l2]
Aug 23 20:59:48 localhost kernel: [17179597.316000] cx88[0]/0: registered device vbi0
Aug 23 20:59:48 localhost kernel: [17179597.316000] tuner 0-0061: tuner type not set
Aug 23 20:59:48 localhost kernel: [17179597.316000] rtl8180: Configuring chip resources
Aug 23 20:59:48 localhost kernel: [17179597.316000] **** SET: Misaligned resource pointer: f79a5c02 Type 07 Len 0
Aug 23 20:59:48 localhost kernel: [17179597.316000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Aug 23 20:59:48 localhost kernel: [17179597.316000] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
Aug 23 20:59:48 localhost kernel: [17179597.316000] rtl8180: Memory mapped space @ 0xfcffe000 
Aug 23 20:59:48 localhost kernel: [17179597.316000] rtl8180: MAC controller is a RTL8185 b/g (V. D)
Aug 23 20:59:48 localhost kernel: [17179597.316000] rtl8180: This is a PCI NIC
Aug 23 20:59:48 localhost kernel: [17179597.316000] rtl8180: Reported EEPROM chip is a 93c46 (1Kbit)
Aug 23 20:59:48 localhost kernel: [17179597.324000] rtl8180: Card MAC address is 00:06:4f:34:bf:6d
Aug 23 20:59:48 localhost kernel: [17179597.336000] rtl8180: EEPROM version 105
Aug 23 20:59:48 localhost kernel: [17179597.340000] NET: Registered protocol family 23
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: Card reports RF frontend Realtek 8225
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: WW:This driver has EXPERIMENTAL support for this chipset.
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: WW:use it with care and at your own risk and
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: Energy threshold: b
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: PAPE from CONFIG2: 6
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: IRQ 66
Aug 23 20:59:48 localhost kernel: [17179597.340000] rtl8180: Driver probe completed
Aug 23 20:59:48 localhost kernel: [17179597.340000] 
Aug 23 20:59:48 localhost kernel: [17179597.376000] cx2388x blackbird driver version 0.0.5 loaded
Aug 23 20:59:48 localhost kernel: [17179597.648000] rtl8180: Setting SW wep key
Aug 23 20:59:48 localhost kernel: [17179597.788000] rtl8180: Bringing up iface
Aug 23 20:59:48 localhost kernel: [17179597.800000] lp0: using parport0 (interrupt-driven).
Aug 23 20:59:48 localhost kernel: [17179597.876000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
Aug 23 20:59:48 localhost kernel: [17179597.876000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
Aug 23 20:59:48 localhost kernel: [17179597.876000] ieee1394: sbp2: Try serialize_io=0 for better performance
Aug 23 20:59:48 localhost kernel: [17179597.952000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
Aug 23 20:59:48 localhost kernel: [17179598.004000] rtl8180: Card successfully reset
Aug 23 20:59:48 localhost kernel: [17179598.092000] Adding 2506100k swap on /dev/sda7.  Priority:-1 extents:1 across:2506100k
Aug 23 20:59:48 localhost kernel: [17179598.176000] EXT3 FS on sda5, internal journal
Aug 23 20:59:48 localhost kernel: [17179598.476000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Aug 23 20:59:48 localhost kernel: [17179598.476000] md: bitmap version 4.39
Aug 23 20:59:48 localhost kernel: [17179599.088000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Aug 23 20:59:48 localhost kernel: [17179599.536000] cdrom: open failed.
Aug 23 20:59:48 localhost kernel: [17179600.340000] NET: Registered protocol family 17
Aug 23 20:59:48 localhost kernel: [17179603.100000] kjournald starting.  Commit interval 5 seconds
Aug 23 20:59:48 localhost kernel: [17179603.100000] EXT3 FS on sda6, internal journal
Aug 23 20:59:48 localhost kernel: [17179603.100000] EXT3-fs: mounted filesystem with ordered data mode.
Aug 23 20:59:48 localhost kernel: [17179603.272000] NTFS driver 2.1.25 [Flags: R/O MODULE].
Aug 23 20:59:48 localhost kernel: [17179603.328000] NTFS volume version 3.1.
Aug 23 20:59:48 localhost kernel: [17179604.988000] ACPI: Power Button (FF) [PWRF]
Aug 23 20:59:48 localhost kernel: [17179604.988000] ACPI: Power Button (CM) [PWRB]
Aug 23 20:59:48 localhost kernel: [17179605.208000] pcc_acpi: loading...
Aug 23 20:59:48 localhost kernel: [17179605.700000] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4)
Aug 23 20:59:48 localhost kernel: [17179605.700000] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
Aug 23 20:59:48 localhost kernel: [17179605.700000] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
Aug 23 20:59:48 localhost kernel: [17179605.700000] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
Aug 23 20:59:48 localhost kernel: [17179605.700000] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Aug 23 20:59:49 localhost hpiod: 0.9.7 accepting connections at 39535... 
Aug 23 20:59:50 localhost kernel: [17179608.428000] ppdev: user-space parallel port driver
Aug 23 20:59:50 localhost kernel: [17179608.672000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Aug 23 20:59:50 localhost kernel: [17179608.672000] apm: disabled - APM is not SMP safe.
Aug 23 20:59:53 localhost dhcdbd: Started up.
Aug 23 20:59:54 localhost kernel: [17179612.068000] eth0: no link during initialization.
Aug 23 20:59:54 localhost kernel: [17179612.608000] Bluetooth: Core ver 2.8
Aug 23 20:59:54 localhost kernel: [17179612.608000] NET: Registered protocol family 31
Aug 23 20:59:54 localhost kernel: [17179612.608000] Bluetooth: HCI device and connection manager initialized
Aug 23 20:59:54 localhost kernel: [17179612.608000] Bluetooth: HCI socket layer initialized
Aug 23 20:59:54 localhost kernel: [17179612.624000] Bluetooth: L2CAP ver 2.8
Aug 23 20:59:54 localhost kernel: [17179612.624000] Bluetooth: L2CAP socket layer initialized
Aug 23 20:59:54 localhost kernel: [17179612.660000] Bluetooth: RFCOMM socket layer initialized
Aug 23 20:59:54 localhost kernel: [17179612.660000] Bluetooth: RFCOMM TTY layer initialized
Aug 23 20:59:54 localhost kernel: [17179612.660000] Bluetooth: RFCOMM ver 1.7
Aug 23 20:59:55 localhost kernel: [17179613.404000] Linking with wifi_915
Aug 23 20:59:55 localhost kernel: [17179613.420000] Associated successfully
Aug 23 20:59:55 localhost kernel: [17179613.420000] Using G rates
Aug 23 21:00:03 localhost gconfd (thomas-5284): démarrage (version 2.14.0), pid 5284 utilisateur « thomas »
Aug 23 21:00:03 localhost gconfd (thomas-5284): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Aug 23 21:00:03 localhost gconfd (thomas-5284): Adresse « xml:readwrite:/home/thomas/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Aug 23 21:00:03 localhost gconfd (thomas-5284): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Aug 23 21:00:03 localhost gconfd (thomas-5284): Adresse « xml:readonly:/var/lib/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 3
Aug 23 21:00:03 localhost gconfd (thomas-5284): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 4
Aug 23 21:00:05 localhost kernel: [17179623.412000] NET: Registered protocol family 10
Aug 23 21:00:08 localhost kernel: [17179626.408000] lo: Disabled Privacy Extensions
Aug 23 21:00:08 localhost kernel: [17179626.408000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 23 21:00:08 localhost kernel: [17179626.408000] IPv6 over IPv4 tunneling driver
Aug 23 21:00:15 localhost gconfd (thomas-5284): Adresse « xml:readwrite:/home/thomas/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
Aug 23 21:00:16 localhost pppd[5371]: Plugin pppoatm.so loaded.
Aug 23 21:00:16 localhost kernel: [17179634.544000] CSLIP: code copyright 1989 Regents of the University of California
Aug 23 21:00:16 localhost kernel: [17179634.576000] PPP generic driver version 2.4.2
Aug 23 21:00:16 localhost pppd[5392]: pppd 2.4.4b1 started by thomas, uid 1000
Aug 23 21:00:16 localhost pppd[5392]: Exit.

xilef

Re : Boot lent

20:59:48 @ 21:00:16... Tu boots très vite là.... 28sec...

---

.felix

Traabh48

Re : Boot lent

mouais mais c'est très louche ce bloquage car sur un portable sony de config équiivalente yen a pas et c'est donc plus rapide....

tuxseb

Re : Boot lent

J'ai le même problème, le mien reste figé 12 secondes sur le uncompressing Linux. Après, il met 30 secondes pour afficher l'écran d'accueil. J'ai un portable Maxdata.

didrocks

Re : Boot lent

ça n'arrive pas à mouting root file system ou qqch comme ça de mémoire ?
Si c'est ça, faites une recherche (éventuellement sur le forum anglais) avec la ligne sur laquelle ça bloque (tu as fait une recherche ?). Je me rappelle que c'est un problème de dapper sur certains matos et il faut rajouter une option dans le menu.lst de grub pour qu'il n'y ait plus à attendre ...

tuxseb

Re : Boot lent

Pour mon cas, je sais maintenant d'où vient le problème. Dès que je débranche ma souris usb je n'ai plus de gèle sur uncompressing  Linux machin chose...

GoF75

Re : Boot lent

Bonjour,

J'envoie un message sur ce post car il me permet de constater que tu as le même chip Wlan que moi et arrive faire tourner Ubuntu.

Moi j'ai un vieux Pentium II que j'essaie de mettre sur Ubuntu avec WLAN et j'ai l'impression que la carte fiche le b....:o

Exemple je viens de la sortir et Ubuntu qui refusait de démarrer viens de démarrer.
Quand j'active la carte dans Ubuntu ... j'ai déjà eu un plantage.
Il s'agit de la longshine 8031G3 réputée compatible !

Gruuumpff !
Ca m'énerve !

Peut-être cela a-t-il une importance :
Au démarrage j'ai ceci :
ACPI Unable to locate RSPD

Merci pour votre aide .... SVP

toninou

Re : Boot lent

Bonsoir,
voila j'aimerais installer un tuner hdtv sur mon ordi .
La marque AverMedia DVB-T hdtv Ready VOLAR A850.
Je suis absolument presque inculte en informatique, donc un bon tuto pasà pas .
Le système: UNBUTU 10.4 Lucid Lynx 64 bits
Merci encore