Ubuntu-fr

tibordo

[ubuntu 6.10] modification de xorg.conf pour installer beryl

je voudrai mettre beryl dans mon ubuntu j´ai donc suivi ce tutorial :
http://doc.ubuntu-fr.org/applications/beryl

et on me demande de modifier le fichier xorg.conf mais apparemment j´ai commis des erreurs et je suis obliger de les corriger sinon au moment du reboot ca va faire comme hier je n´aurai plus d´interface graphique ety je serai obliger de reformater encore une foi ^^

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"

FontPath "/usr/share/X11/fonts/100dpi/:unscaled"

FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts

FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs
/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
# Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
# Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
# Option "GARTSize" "64"
# Option "RingSize" "8"
# Option "BufferSize" "2"
# Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
# Option "ColorTiling" "1"
# Option "EnableDepthMoves" "yes"
# Option "UseFBDev" "false"
# Option "RenderAccel" "true" # Enable the hardware render acceleration
# Option "mtrr" "on"
# Option "SubPixelOrder" "none"
# Option "DPMS"
# Option "DynamicClocks" "on"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Dernière modification par Stemp (Le 29/10/2006, à 16:59)

Stemp

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

Pense à mettre tes listings entre une balise Code

comme hier je n´aurai plus d´interface graphique ety je serai obliger de reformater encore une foi

Tu n'es pas obligé de reformater pour changer ton fichier xorg.conf

Pour voir les erreurs regarde ton fichier /var/log/Xorg.0.log
Pour lister toutes les erreurs lance la commande suivante : cat /var/log/Xorg.0.log | grep EE

---

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

tibordo

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

merci!

j'ai lancé la commande voila ce qu'il me marque :

tibordo@LaptUpgrading:~$ cat /var/log/Xorg.0.log | grep EE
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom

tibordo

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

svp comment est ce que je peux regler ce probleme ?

Stemp

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

svp comment est ce que je peux regler ce probleme ?

Quel problème ?

---

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

tibordo

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

tibordo@LaptUpgrading:~$ cat /var/log/Xorg.0.log | grep EE
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom

celui la de probleme

cep

Re : [ubuntu 6.10] modification de xorg.conf pour installer beryl

tibordo, tu te fiches du monde ?
4 sujets nouveaux sur le même problème.
Je viens de supprimer le nième portant exactement le contenu de ce poste #6.

---

Mon Seen This