Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

ArchangeGabriel · Le 26/11/2011, à 23:09

@Qid : Xorg.0.log.old s'il te plaît.

@johnkay : Tu ne peux pas faire tourner le xorg principal sur la carte nvidia pour le moment. Pour les effets graphiques, c'est du côté Intel que cela se passe. Tu arrives à lancer Unity 3D ou pas ?

@Sp0tnik : Tu peux copier les lignes en question s'il te plaît ?

djguigui · Le 26/11/2011, à 23:41

Bonjour à tous !

Je me joins à vous car j'ai acheté un Asus K53SJ qui dispose lui aussi de ce MAGNIFIQUE OPTIMUS (ironique ! big_smile)
Bon alors, pour ma part, c'est une GT520M de 1Gb de RAM.
Aujourd'hui j'ai besoin de Xubuntu (je préfère Xfce à Gnome tongue), pour programmer en processing (Y'en a ras le bol de Windows ! ).

J'ai des conaissance très basique sur linux, mais si je peux aider de n'importe quel façon, je suis prêt !
J'aurais juste voulu savoir si il n'y avait pas une méthode pour qu'optirun se lance avec toutes les application ?

ArchangeGabriel · Le 26/11/2011, à 23:47

Pas pour le moment, car cela poserait trop de problèmes.

djguigui · Le 26/11/2011, à 23:53

Ok merci, juste j'ai essayer de suivre le système caron/cardoff.
J'ai trouvé quoi mettre dans le cardoff:

\_SB.PCI0.PEGR.GFX0._OFF

Mais pas pour le cardon, une idée ?
Edit: trouvé sur ce site: http://hybrid-graphics-linux.tuxfamily. … calls#Asus
Re-edit:
Dans le cardon j'aimis ça:

\_SB.PCI0.PEGR.GFX0._ON

Et apparement, la gestion d'énergie fonctionne assez bien:
State avant le test: 1655mA
State pendant le test: 4191mA
State après le test: 2121mA

Aussi le ventilo du Pc se met a faire un bruit énorme, pas inquiétant juste que le ventilo fait beaucoup de bruit !

Dernière modification par djguigui (Le 27/11/2011, à 00:06)

ArchangeGabriel · Le 27/11/2011, à 00:11

Suis la procédure dans le premier post pour obtenir les appels ACPI (à la fin tu post).

Sp0tnik · Le 27/11/2011, à 08:47

@ArchangeGabriel

Je ne peux pas copier les lignes de codes, c'est pas sur la console donc pas de copié collé possible, par contre le messag d'erreur sur la console c'est:

yann@TARDIS:~$ optirun glxspheres
The Bumblebee X server was not available, please check the
Bumblebee logfile at /var/log/bumblebee.log
==================================================

et le logfile en question:

[     16.44] Bumblebee log started at Tue, 08 Nov 2011 06:46:56 +0100
[     16.45] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.45] Making FIFO writable for members of group bumblebee
[     16.45] Power management is disabled, not disabling card on start.
[     16.46] Waiting for orders
[   3340.72] Checking for X server availability before stopping it...
[   3340.72] The X server has not started or the pidfile is invalid.
[   3340.72] X is stopped.
[   3340.73] Power management is disabled, not unloading driver
[   3340.73] Power management is disabled, card already enabled.
[   3340.73] Bumblebee log ended on Tue, 08 Nov 2011 07:42:20 +0100
[     16.24] Bumblebee log started at Tue, 08 Nov 2011 12:35:00 +0100
[     16.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.25] Making FIFO writable for members of group bumblebee
[     16.27] Power management is disabled, not disabling card on start.
[     16.27] Waiting for orders
[  12359.27] Checking for X server availability before stopping it...
[  12359.27] The X server has not started or the pidfile is invalid.
[  12359.28] X is stopped.
[  12359.28] Power management is disabled, not unloading driver
[  12359.29] Power management is disabled, card already enabled.
[  12359.29] Bumblebee log ended on Tue, 08 Nov 2011 16:00:43 +0100
[     16.79] Bumblebee log started at Tue, 08 Nov 2011 19:40:33 +0100
[     16.79] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.80] Making FIFO writable for members of group bumblebee
[     16.80] Power management is disabled, not disabling card on start.
[     16.80] Waiting for orders
[  11915.85] Checking for X server availability before stopping it...
[  11917.04] The X server has not started or the pidfile is invalid.
[  11917.04] X is stopped.
[  11917.05] Power management is disabled, not unloading driver
[  11917.05] Power management is disabled, card already enabled.
[  11917.26] Bumblebee log ended on Tue, 08 Nov 2011 22:58:54 +0100
[     16.97] Bumblebee log started at Wed, 09 Nov 2011 06:47:26 +0100
[     16.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.97] Making FIFO writable for members of group bumblebee
[     16.98] Power management is disabled, not disabling card on start.
[     16.98] Waiting for orders
[   3476.50] Checking for X server availability before stopping it...
[   3476.64] The X server has not started or the pidfile is invalid.
[   3476.64] X is stopped.
[   3476.64] Power management is disabled, not unloading driver
[   3476.65] Power management is disabled, card already enabled.
[   3476.65] Bumblebee log ended on Wed, 09 Nov 2011 07:45:05 +0100
[     16.52] Bumblebee log started at Wed, 09 Nov 2011 11:28:36 +0100
[     16.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.52] Making FIFO writable for members of group bumblebee
[     16.52] Power management is disabled, not disabling card on start.
[     16.53] Waiting for orders
[    609.43] Checking for X server availability before stopping it...
[    609.43] The X server has not started or the pidfile is invalid.
[    609.44] X is stopped.
[    609.44] Power management is disabled, not unloading driver
[    609.45] Power management is disabled, card already enabled.
[    609.45] Bumblebee log ended on Wed, 09 Nov 2011 11:38:29 +0100
[     17.01] Bumblebee log started at Wed, 09 Nov 2011 12:05:02 +0100
[     17.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.01] Making FIFO writable for members of group bumblebee
[     17.02] Power management is disabled, not disabling card on start.
[     17.02] Waiting for orders
[   5833.39] Checking for X server availability before stopping it...
[   5833.40] The X server has not started or the pidfile is invalid.
[   5833.40] X is stopped.
[   5833.40] Power management is disabled, not unloading driver
[   5833.41] Power management is disabled, card already enabled.
[   5833.41] Bumblebee log ended on Wed, 09 Nov 2011 13:41:59 +0100
[     16.32] Bumblebee log started at Wed, 09 Nov 2011 18:29:56 +0100
[     16.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.33] Making FIFO writable for members of group bumblebee
[     16.33] Power management is disabled, not disabling card on start.
[     16.34] Waiting for orders
[  18394.48] Checking for X server availability before stopping it...
[  18395.07] The X server has not started or the pidfile is invalid.
[  18395.26] X is stopped.
[  18395.26] Power management is disabled, not unloading driver
[  18395.26] Power management is disabled, card already enabled.
[  18395.83] Bumblebee log ended on Wed, 09 Nov 2011 23:36:15 +0100
[     21.27] Bumblebee log started at Thu, 10 Nov 2011 06:47:15 +0100
[     21.27] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.35] Making FIFO writable for members of group bumblebee
[     21.35] Power management is disabled, not disabling card on start.
[     21.35] Waiting for orders
[   8910.41] Checking for X server availability before stopping it...
[   8910.51] The X server has not started or the pidfile is invalid.
[   8910.52] X is stopped.
[   8910.52] Power management is disabled, not unloading driver
[   8910.53] Power management is disabled, card already enabled.
[   8910.60] Bumblebee log ended on Thu, 10 Nov 2011 09:15:24 +0100
[     20.75] Bumblebee log started at Thu, 10 Nov 2011 10:57:39 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.77] Power management is disabled, not disabling card on start.
[     20.77] Waiting for orders
[   2812.67] Checking for X server availability before stopping it...
[   2812.68] The X server has not started or the pidfile is invalid.
[   2812.68] X is stopped.
[   2812.68] Power management is disabled, not unloading driver
[   2812.69] Power management is disabled, card already enabled.
[   2812.69] Bumblebee log ended on Thu, 10 Nov 2011 11:44:11 +0100
[     20.73] Bumblebee log started at Thu, 10 Nov 2011 12:24:22 +0100
[     20.74] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.74] Making FIFO writable for members of group bumblebee
[     20.74] Power management is disabled, not disabling card on start.
[     20.75] Waiting for orders
[   4897.10] Checking for X server availability before stopping it...
[   4897.11] The X server has not started or the pidfile is invalid.
[   4897.11] X is stopped.
[   4897.12] Power management is disabled, not unloading driver
[   4897.12] Power management is disabled, card already enabled.
[   4897.12] Bumblebee log ended on Thu, 10 Nov 2011 13:45:38 +0100
[     20.65] Bumblebee log started at Thu, 10 Nov 2011 17:33:19 +0100
[     20.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.65] Making FIFO writable for members of group bumblebee
[     20.66] Power management is disabled, not disabling card on start.
[     20.66] Waiting for orders
[   5043.97] Checking for X server availability before stopping it...
[   5043.98] The X server has not started or the pidfile is invalid.
[   5043.98] X is stopped.
[   5043.99] Power management is disabled, not unloading driver
[   5043.99] Power management is disabled, card already enabled.
[   5044.09] Bumblebee log ended on Thu, 10 Nov 2011 18:57:02 +0100
[     21.16] Bumblebee log started at Thu, 10 Nov 2011 20:08:43 +0100
[     21.17] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.17] Making FIFO writable for members of group bumblebee
[     21.17] Power management is disabled, not disabling card on start.
[     21.18] Waiting for orders
[   8342.80] Checking for X server availability before stopping it...
[   8343.00] The X server has not started or the pidfile is invalid.
[   8343.03] X is stopped.
[   8343.03] Power management is disabled, not unloading driver
[   8343.04] Power management is disabled, card already enabled.
[   8343.04] Bumblebee log ended on Thu, 10 Nov 2011 22:27:25 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 01:52:23 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.89] Making FIFO writable for members of group bumblebee
[     20.89] Power management is disabled, not disabling card on start.
[     20.90] Waiting for orders
[   5698.52] Checking for X server availability before stopping it...
[   5698.53] The X server has not started or the pidfile is invalid.
[   5698.55] X is stopped.
[   5698.55] Power management is disabled, not unloading driver
[   5698.56] Power management is disabled, card already enabled.
[   5698.56] Bumblebee log ended on Fri, 11 Nov 2011 03:27:01 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 11:24:39 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.90] Making FIFO writable for members of group bumblebee
[     20.91] Power management is disabled, not disabling card on start.
[     20.91] Waiting for orders
[  42591.17] Checking for X server availability before stopping it...
[  42592.47] The X server has not started or the pidfile is invalid.
[  42592.49] X is stopped.
[  42592.49] Power management is disabled, not unloading driver
[  42592.49] Power management is disabled, card already enabled.
[  42592.97] Bumblebee log ended on Fri, 11 Nov 2011 23:14:11 +0100
[     21.14] Bumblebee log started at Sat, 12 Nov 2011 08:29:00 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.20] Making FIFO writable for members of group bumblebee
[     21.21] Power management is disabled, not disabling card on start.
[     21.21] Waiting for orders
[  45863.07] Checking for X server availability before stopping it...
[  45863.38] The X server has not started or the pidfile is invalid.
[  45863.47] X is stopped.
[  45863.48] Power management is disabled, not unloading driver
[  45863.48] Power management is disabled, card already enabled.
[  45863.89] Bumblebee log ended on Sat, 12 Nov 2011 21:13:03 +0100
[     20.36] Bumblebee log started at Sun, 13 Nov 2011 10:46:54 +0100
[     20.37] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.37] Making FIFO writable for members of group bumblebee
[     20.37] Power management is disabled, not disabling card on start.
[     20.38] Waiting for orders
[     24.01] Bumblebee log started at Sun, 13 Nov 2011 11:30:49 +0100
[     24.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     24.01] Making FIFO writable for members of group bumblebee
[     24.01] Power management is disabled, not disabling card on start.
[     24.02] Waiting for orders
[  23265.98] Checking for X server availability before stopping it...
[  23266.02] The X server has not started or the pidfile is invalid.
[  23266.03] X is stopped.
[  23266.03] Power management is disabled, not unloading driver
[  23266.03] Power management is disabled, card already enabled.
[  23266.34] Bumblebee log ended on Sun, 13 Nov 2011 17:58:12 +0100
[     20.46] Bumblebee log started at Sun, 13 Nov 2011 19:07:39 +0100
[     20.46] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.46] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   3193.69] Checking for X server availability before stopping it...
[   3193.69] The X server has not started or the pidfile is invalid.
[   3193.70] X is stopped.
[   3193.71] Power management is disabled, not unloading driver
[   3193.72] Power management is disabled, card already enabled.
[   3193.80] Bumblebee log ended on Sun, 13 Nov 2011 20:00:32 +0100
[     20.52] Bumblebee log started at Sun, 13 Nov 2011 20:01:28 +0100
[     20.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.53] Making FIFO writable for members of group bumblebee
[     20.53] Power management is disabled, not disabling card on start.
[     20.54] Waiting for orders
[     30.33] Checking for X server availability before stopping it...
[     30.33] The X server has not started or the pidfile is invalid.
[     30.33] X is stopped.
[     30.34] Power management is disabled, not unloading driver
[     30.34] Power management is disabled, card already enabled.
[     30.35] Bumblebee log ended on Sun, 13 Nov 2011 20:01:38 +0100
[     20.54] Bumblebee log started at Sun, 13 Nov 2011 20:37:37 +0100
[     20.54] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.54] Making FIFO writable for members of group bumblebee
[     20.55] Power management is disabled, not disabling card on start.
[     20.55] Waiting for orders
[     20.96] Bumblebee log started at Sun, 13 Nov 2011 20:39:43 +0100
[     20.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.97] Making FIFO writable for members of group bumblebee
[     20.97] Power management is disabled, not disabling card on start.
[     20.97] Waiting for orders
[     22.46] Bumblebee log started at Sun, 13 Nov 2011 23:12:21 +0100
[     22.47] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.47] Making FIFO writable for members of group bumblebee
[     22.47] Power management is disabled, not disabling card on start.
[     22.48] Waiting for orders
[    591.80] Checking for X server availability before stopping it...
[    591.80] The X server has not started or the pidfile is invalid.
[    591.80] X is stopped.
[    592.12] Power management is disabled, not unloading driver
[    592.12] Power management is disabled, card already enabled.
[    592.13] Bumblebee log ended on Sun, 13 Nov 2011 23:21:50 +0100
[     20.16] Bumblebee log started at Mon, 14 Nov 2011 06:47:06 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.17] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   3552.88] Checking for X server availability before stopping it...
[   3553.31] The X server has not started or the pidfile is invalid.
[   3553.32] X is stopped.
[   3553.32] Power management is disabled, not unloading driver
[   3553.32] Power management is disabled, card already enabled.
[   3553.43] Bumblebee log ended on Mon, 14 Nov 2011 07:46:00 +0100
[     22.09] Bumblebee log started at Mon, 14 Nov 2011 12:42:18 +0100
[     22.10] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.10] Making FIFO writable for members of group bumblebee
[     22.10] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[  11942.56] Checking for X server availability before stopping it...
[  11942.56] The X server has not started or the pidfile is invalid.
[  11942.56] X is stopped.
[  11942.57] Power management is disabled, not unloading driver
[  11942.57] Power management is disabled, card already enabled.
[  11942.57] Bumblebee log ended on Mon, 14 Nov 2011 16:00:59 +0100
[     20.58] Bumblebee log started at Mon, 14 Nov 2011 17:56:36 +0100
[     20.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.59] Making FIFO writable for members of group bumblebee
[     20.59] Power management is disabled, not disabling card on start.
[     20.59] Waiting for orders
[  15369.22] Checking for X server availability before stopping it...
[  15369.23] The X server has not started or the pidfile is invalid.
[  15369.23] X is stopped.
[  15369.24] Power management is disabled, not unloading driver
[  15369.25] Power management is disabled, card already enabled.
[  15369.30] Bumblebee log ended on Mon, 14 Nov 2011 22:12:25 +0100
[     21.05] Bumblebee log started at Tue, 15 Nov 2011 06:46:53 +0100
[     21.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.05] Making FIFO writable for members of group bumblebee
[     21.06] Power management is disabled, not disabling card on start.
[     21.06] Waiting for orders
[   3450.03] Checking for X server availability before stopping it...
[   3450.28] The X server has not started or the pidfile is invalid.
[   3450.29] X is stopped.
[   3450.29] Power management is disabled, not unloading driver
[   3450.29] Power management is disabled, card already enabled.
[   3450.31] Bumblebee log ended on Tue, 15 Nov 2011 07:44:03 +0100
[     20.25] Bumblebee log started at Tue, 15 Nov 2011 12:33:05 +0100
[     20.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.26] Making FIFO writable for members of group bumblebee
[     20.26] Power management is disabled, not disabling card on start.
[     20.26] Waiting for orders
[    108.94] Checking for X server availability before stopping it...
[    108.96] The X server has not started or the pidfile is invalid.
[    108.97] X is stopped.
[    108.97] Power management is disabled, not unloading driver
[    108.97] Power management is disabled, card already enabled.
[    108.98] Bumblebee log ended on Tue, 15 Nov 2011 12:34:33 +0100
[     20.48] Bumblebee log started at Tue, 15 Nov 2011 12:35:23 +0100
[     20.49] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.49] Making FIFO writable for members of group bumblebee
[     20.50] Power management is disabled, not disabling card on start.
[     20.50] Waiting for orders
[   4402.43] Checking for X server availability before stopping it...
[   4402.44] The X server has not started or the pidfile is invalid.
[   4402.44] X is stopped.
[   4402.45] Power management is disabled, not unloading driver
[   4402.46] Power management is disabled, card already enabled.
[   4402.63] Bumblebee log ended on Tue, 15 Nov 2011 13:48:25 +0100
[     43.95] Bumblebee log started at Tue, 15 Nov 2011 14:46:28 +0100
[     43.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.96] Making FIFO writable for members of group bumblebee
[     43.96] Power management is disabled, not disabling card on start.
[     43.97] Waiting for orders
[  19830.85] Checking for X server availability before stopping it...
[  19831.14] The X server has not started or the pidfile is invalid.
[  19831.21] X is stopped.
[  19831.22] Power management is disabled, not unloading driver
[  19831.23] Power management is disabled, card already enabled.
[  19831.28] Bumblebee log ended on Tue, 15 Nov 2011 20:16:16 +0100
[     20.95] Bumblebee log started at Tue, 15 Nov 2011 20:17:08 +0100
[     20.95] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.95] Making FIFO writable for members of group bumblebee
[     20.96] Power management is disabled, not disabling card on start.
[     20.96] Waiting for orders
[   2290.72] Checking for X server availability before stopping it...
[   2290.72] The X server has not started or the pidfile is invalid.
[   2290.73] X is stopped.
[   2290.73] Power management is disabled, not unloading driver
[   2290.73] Power management is disabled, card already enabled.
[   2290.74] Bumblebee log ended on Tue, 15 Nov 2011 20:54:58 +0100
[     20.14] Bumblebee log started at Wed, 16 Nov 2011 01:16:44 +0100
[     20.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.15] Making FIFO writable for members of group bumblebee
[     20.15] Power management is disabled, not disabling card on start.
[     20.15] Waiting for orders
[    523.29] Checking for X server availability before stopping it...
[    523.30] The X server has not started or the pidfile is invalid.
[    523.30] X is stopped.
[    523.30] Power management is disabled, not unloading driver
[    523.31] Power management is disabled, card already enabled.
[    523.31] Bumblebee log ended on Wed, 16 Nov 2011 01:25:08 +0100
[     19.77] Bumblebee log started at Wed, 16 Nov 2011 06:46:47 +0100
[     19.78] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.78] Making FIFO writable for members of group bumblebee
[     19.78] Power management is disabled, not disabling card on start.
[     19.79] Waiting for orders
[   3232.13] Checking for X server availability before stopping it...
[   3232.13] The X server has not started or the pidfile is invalid.
[   3232.13] X is stopped.
[   3232.14] Power management is disabled, not unloading driver
[   3232.14] Power management is disabled, card already enabled.
[   3232.14] Bumblebee log ended on Wed, 16 Nov 2011 07:40:19 +0100
[     20.29] Bumblebee log started at Wed, 16 Nov 2011 12:46:46 +0100
[     20.29] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.29] Making FIFO writable for members of group bumblebee
[     20.30] Power management is disabled, not disabling card on start.
[     20.30] Waiting for orders
[   3384.20] Checking for X server availability before stopping it...
[   3384.27] The X server has not started or the pidfile is invalid.
[   3384.28] X is stopped.
[   3384.28] Power management is disabled, not unloading driver
[   3384.29] Power management is disabled, card already enabled.
[   3384.36] Bumblebee log ended on Wed, 16 Nov 2011 13:42:50 +0100
[     20.75] Bumblebee log started at Wed, 16 Nov 2011 17:24:38 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.76] Power management is disabled, not disabling card on start.
[     20.76] Waiting for orders
[  13407.70] Checking for X server availability before stopping it...
[  13407.73] The X server has not started or the pidfile is invalid.
[  13407.73] X is stopped.
[  13407.74] Power management is disabled, not unloading driver
[  13407.75] Power management is disabled, card already enabled.
[  13407.79] Bumblebee log ended on Wed, 16 Nov 2011 21:07:45 +0100
[     20.16] Bumblebee log started at Wed, 16 Nov 2011 23:27:45 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.16] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   1742.36] Checking for X server availability before stopping it...
[   1742.37] The X server has not started or the pidfile is invalid.
[   1743.42] X is stopped.
[   1743.42] Power management is disabled, not unloading driver
[   1743.43] Power management is disabled, card already enabled.
[   1743.64] Bumblebee log ended on Wed, 16 Nov 2011 23:56:29 +0100
[     20.67] Bumblebee log started at Thu, 17 Nov 2011 06:46:35 +0100
[     20.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.67] Making FIFO writable for members of group bumblebee
[     20.68] Power management is disabled, not disabling card on start.
[     20.68] Waiting for orders
[   3526.34] Checking for X server availability before stopping it...
[   3526.38] The X server has not started or the pidfile is invalid.
[   3526.39] X is stopped.
[   3526.39] Power management is disabled, not unloading driver
[   3526.39] Power management is disabled, card already enabled.
[   3527.34] Bumblebee log ended on Thu, 17 Nov 2011 07:45:02 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 12:54:41 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.22] Making FIFO writable for members of group bumblebee
[     19.22] Power management is disabled, not disabling card on start.
[     19.22] Waiting for orders
[   2968.99] Checking for X server availability before stopping it...
[   2968.99] The X server has not started or the pidfile is invalid.
[   2969.00] X is stopped.
[   2969.00] Power management is disabled, not unloading driver
[   2969.01] Power management is disabled, card already enabled.
[   2969.10] Bumblebee log ended on Thu, 17 Nov 2011 13:43:51 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 17:29:29 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.08] Making FIFO writable for members of group bumblebee
[     19.08] Power management is disabled, not disabling card on start.
[     19.08] Waiting for orders
[     21.14] Bumblebee log started at Fri, 18 Nov 2011 06:46:47 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.16] Making FIFO writable for members of group bumblebee
[     21.16] Power management is disabled, not disabling card on start.
[     21.16] Waiting for orders
[   3495.04] Checking for X server availability before stopping it...
[   3495.04] The X server has not started or the pidfile is invalid.
[   3495.08] X is stopped.
[   3495.08] Power management is disabled, not unloading driver
[   3495.08] Power management is disabled, card already enabled.
[   3495.09] Bumblebee log ended on Fri, 18 Nov 2011 07:44:41 +0100
[     18.83] Bumblebee log started at Fri, 18 Nov 2011 12:45:03 +0100
[     18.85] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.85] Making FIFO writable for members of group bumblebee
[     18.86] Power management is disabled, not disabling card on start.
[     18.86] Waiting for orders
[   1814.24] Checking for X server availability before stopping it...
[   1814.25] The X server has not started or the pidfile is invalid.
[   1814.25] X is stopped.
[   1814.26] Power management is disabled, not unloading driver
[   1814.26] Power management is disabled, card already enabled.
[   1814.47] Bumblebee log ended on Fri, 18 Nov 2011 13:14:59 +0100
[     19.12] Bumblebee log started at Fri, 18 Nov 2011 16:12:42 +0100
[     19.13] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.13] Making FIFO writable for members of group bumblebee
[     19.14] Power management is disabled, not disabling card on start.
[     19.14] Waiting for orders
[  24725.05] Checking for X server availability before stopping it...
[  24726.37] The X server has not started or the pidfile is invalid.
[  24726.38] X is stopped.
[  24726.50] Power management is disabled, not unloading driver
[  24726.51] Power management is disabled, card already enabled.
[  24726.54] Bumblebee log ended on Fri, 18 Nov 2011 23:04:30 +0100
[     19.57] Bumblebee log started at Sat, 19 Nov 2011 08:38:16 +0100
[     19.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.57] Making FIFO writable for members of group bumblebee
[     19.58] Power management is disabled, not disabling card on start.
[     19.58] Waiting for orders
[     21.77] Bumblebee log started at Sat, 19 Nov 2011 17:13:09 +0100
[     21.77] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.78] Making FIFO writable for members of group bumblebee
[     21.78] Power management is disabled, not disabling card on start.
[     21.78] Waiting for orders
[  16485.45] Checking for X server availability before stopping it...
[  16485.52] The X server has not started or the pidfile is invalid.
[  16485.52] X is stopped.
[  16485.52] Power management is disabled, not unloading driver
[  16485.53] Power management is disabled, card already enabled.
[  16485.76] Bumblebee log ended on Sat, 19 Nov 2011 21:47:33 +0100
[     18.92] Bumblebee log started at Sun, 20 Nov 2011 08:51:59 +0100
[     18.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.93] Making FIFO writable for members of group bumblebee
[     18.93] Power management is disabled, not disabling card on start.
[     18.94] Waiting for orders
[     23.57] Bumblebee log started at Sun, 20 Nov 2011 20:59:30 +0100
[     23.58] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.58] Making FIFO writable for members of group bumblebee
[     23.58] Power management is disabled, not disabling card on start.
[     23.58] Waiting for orders
[     21.67] Bumblebee log started at Sun, 20 Nov 2011 21:48:34 +0100
[     21.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.68] Making FIFO writable for members of group bumblebee
[     21.68] Power management is disabled, not disabling card on start.
[     21.68] Waiting for orders
[   3189.55] Checking for X server availability before stopping it...
[   3189.56] The X server has not started or the pidfile is invalid.
[   3189.57] X is stopped.
[   3189.58] Power management is disabled, not unloading driver
[   3189.58] Power management is disabled, card already enabled.
[   3189.61] Bumblebee log ended on Sun, 20 Nov 2011 22:41:22 +0100
[     19.89] Bumblebee log started at Sun, 20 Nov 2011 22:49:29 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[    463.22] Checking for X server availability before stopping it...
[    463.23] The X server has not started or the pidfile is invalid.
[    463.23] X is stopped.
[    463.24] Power management is disabled, not unloading driver
[    463.24] Power management is disabled, card already enabled.
[    463.25] Bumblebee log ended on Sun, 20 Nov 2011 22:56:52 +0100
[     19.92] Bumblebee log started at Mon, 21 Nov 2011 06:46:41 +0100
[     19.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.93] Making FIFO writable for members of group bumblebee
[     19.93] Power management is disabled, not disabling card on start.
[     19.93] Waiting for orders
[     20.40] Bumblebee log started at Mon, 21 Nov 2011 12:27:26 +0100
[     20.41] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.47] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   2837.24] Checking for X server availability before stopping it...
[   2837.25] The X server has not started or the pidfile is invalid.
[   2837.25] X is stopped.
[   2837.25] Power management is disabled, not unloading driver
[   2837.26] Power management is disabled, card already enabled.
[   2837.27] Bumblebee log ended on Mon, 21 Nov 2011 13:14:23 +0100
[     20.04] Bumblebee log started at Mon, 21 Nov 2011 17:54:00 +0100
[     20.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.04] Making FIFO writable for members of group bumblebee
[     20.05] Power management is disabled, not disabling card on start.
[     20.05] Waiting for orders
[   5298.95] Checking for X server availability before stopping it...
[   5299.08] The X server has not started or the pidfile is invalid.
[   5299.09] X is stopped.
[   5299.09] Power management is disabled, not unloading driver
[   5299.10] Power management is disabled, card already enabled.
[   5299.10] Bumblebee log ended on Mon, 21 Nov 2011 19:21:59 +0100
[     19.14] Bumblebee log started at Mon, 21 Nov 2011 21:43:17 +0100
[     19.15] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.15] Making FIFO writable for members of group bumblebee
[     19.15] Power management is disabled, not disabling card on start.
[     19.16] Waiting for orders
[   5920.55] Checking for X server availability before stopping it...
[   5920.55] The X server has not started or the pidfile is invalid.
[   5920.55] X is stopped.
[   5920.56] Power management is disabled, not unloading driver
[   5920.56] Power management is disabled, card already enabled.
[   5920.56] Bumblebee log ended on Mon, 21 Nov 2011 23:21:39 +0100
[     19.38] Bumblebee log started at Tue, 22 Nov 2011 06:46:40 +0100
[     19.39] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.39] Making FIFO writable for members of group bumblebee
[     19.39] Power management is disabled, not disabling card on start.
[     19.40] Waiting for orders
[   3549.94] Checking for X server availability before stopping it...
[   3549.94] The X server has not started or the pidfile is invalid.
[   3549.95] X is stopped.
[   3549.96] Power management is disabled, not unloading driver
[   3549.96] Power management is disabled, card already enabled.
[   3549.97] Bumblebee log ended on Tue, 22 Nov 2011 07:45:30 +0100
[     19.59] Bumblebee log started at Tue, 22 Nov 2011 12:46:40 +0100
[     19.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.60] Making FIFO writable for members of group bumblebee
[     19.60] Power management is disabled, not disabling card on start.
[     19.60] Waiting for orders
[   1400.37] Checking for X server availability before stopping it...
[   1400.38] The X server has not started or the pidfile is invalid.
[   1400.38] X is stopped.
[   1400.38] Power management is disabled, not unloading driver
[   1400.39] Power management is disabled, card already enabled.
[   1400.40] Bumblebee log ended on Tue, 22 Nov 2011 13:09:41 +0100
[     19.64] Bumblebee log started at Tue, 22 Nov 2011 16:02:09 +0100
[     19.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.65] Making FIFO writable for members of group bumblebee
[     19.65] Power management is disabled, not disabling card on start.
[     19.65] Waiting for orders
[     94.77] Checking for X server availability before stopping it...
[     94.77] The X server has not started or the pidfile is invalid.
[     94.78] X is stopped.
[     94.78] Power management is disabled, not unloading driver
[     94.78] Power management is disabled, card already enabled.
[     94.78] Bumblebee log ended on Tue, 22 Nov 2011 16:03:24 +0100
[     18.85] Bumblebee log started at Tue, 22 Nov 2011 18:44:32 +0100
[     18.86] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.87] Making FIFO writable for members of group bumblebee
[     18.87] Power management is disabled, not disabling card on start.
[     18.88] Waiting for orders
[     22.72] Bumblebee log started at Wed, 23 Nov 2011 06:47:17 +0100
[     22.72] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.73] Making FIFO writable for members of group bumblebee
[     22.73] Power management is disabled, not disabling card on start.
[     22.73] Waiting for orders
[   3447.68] Checking for X server availability before stopping it...
[   3447.79] The X server has not started or the pidfile is invalid.
[   3447.80] X is stopped.
[   3447.80] Power management is disabled, not unloading driver
[   3447.80] Power management is disabled, card already enabled.
[   3447.81] Bumblebee log ended on Wed, 23 Nov 2011 07:44:22 +0100
[     21.92] Bumblebee log started at Wed, 23 Nov 2011 12:52:01 +0100
[     21.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.08] Making FIFO writable for members of group bumblebee
[     22.08] Power management is disabled, not disabling card on start.
[     22.08] Waiting for orders
[   3220.90] Checking for X server availability before stopping it...
[   3220.90] The X server has not started or the pidfile is invalid.
[   3220.90] X is stopped.
[   3220.90] Power management is disabled, not unloading driver
[   3220.91] Power management is disabled, card already enabled.
[   3220.99] Bumblebee log ended on Wed, 23 Nov 2011 13:45:20 +0100
[     17.38] Bumblebee log started at Wed, 23 Nov 2011 16:13:44 +0100
[     17.38] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.39] Making FIFO writable for members of group bumblebee
[     17.39] Power management is disabled, not disabling card on start.
[     17.39] Waiting for orders
[   8018.44] Checking for X server availability before stopping it...
[   8018.45] The X server has not started or the pidfile is invalid.
[   8018.45] X is stopped.
[   8018.47] Power management is disabled, not unloading driver
[   8018.48] Power management is disabled, card already enabled.
[   8018.65] Bumblebee log ended on Wed, 23 Nov 2011 18:27:05 +0100
[     17.65] Bumblebee log started at Wed, 23 Nov 2011 18:41:43 +0100
[     17.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.65] Making FIFO writable for members of group bumblebee
[     17.66] Power management is disabled, not disabling card on start.
[     17.66] Waiting for orders
[     67.47] Checking for X server availability before stopping it...
[     67.61] The X server has not started or the pidfile is invalid.
[     67.61] X is stopped.
[     67.61] Power management is disabled, not unloading driver
[     67.61] Power management is disabled, card already enabled.
[     67.62] Bumblebee log ended on Wed, 23 Nov 2011 18:42:33 +0100
[     17.63] Bumblebee log started at Wed, 23 Nov 2011 21:23:59 +0100
[     17.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.64] Making FIFO writable for members of group bumblebee
[     17.64] Power management is disabled, not disabling card on start.
[     17.65] Waiting for orders
[   4045.12] Checking for X server availability before stopping it...
[   4045.13] The X server has not started or the pidfile is invalid.
[   4045.13] X is stopped.
[   4045.14] Power management is disabled, not unloading driver
[   4045.14] Power management is disabled, card already enabled.
[   4045.31] Bumblebee log ended on Wed, 23 Nov 2011 22:31:07 +0100
[     17.33] Bumblebee log started at Thu, 24 Nov 2011 06:47:11 +0100
[     17.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.33] Making FIFO writable for members of group bumblebee
[     17.34] Power management is disabled, not disabling card on start.
[     17.34] Waiting for orders
[     43.01] Bumblebee log started at Thu, 24 Nov 2011 07:07:24 +0100
[     43.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.02] Making FIFO writable for members of group bumblebee
[     43.02] Power management is disabled, not disabling card on start.
[     43.02] Waiting for orders
[   1987.64] Checking for X server availability before stopping it...
[   1987.65] The X server has not started or the pidfile is invalid.
[   1987.66] X is stopped.
[   1987.67] Power management is disabled, not unloading driver
[   1987.74] Power management is disabled, card already enabled.
[   1987.75] Bumblebee log ended on Thu, 24 Nov 2011 07:39:49 +0100
[     17.22] Bumblebee log started at Thu, 24 Nov 2011 12:55:22 +0100
[     17.22] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.24] Making FIFO writable for members of group bumblebee
[     17.26] Power management is disabled, not disabling card on start.
[     17.26] Waiting for orders
[   2576.05] Checking for X server availability before stopping it...
[   2576.17] The X server has not started or the pidfile is invalid.
[   2576.17] X is stopped.
[   2576.17] Power management is disabled, not unloading driver
[   2576.18] Power management is disabled, card already enabled.
[   2576.51] Bumblebee log ended on Thu, 24 Nov 2011 13:38:02 +0100
[     18.04] Bumblebee log started at Thu, 24 Nov 2011 13:38:51 +0100
[     18.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.05] Making FIFO writable for members of group bumblebee
[     18.05] Power management is disabled, not disabling card on start.
[     18.05] Waiting for orders
[     79.64] Checking for X server availability before stopping it...
[     79.76] The X server has not started or the pidfile is invalid.
[     79.76] X is stopped.
[     79.76] Power management is disabled, not unloading driver
[     79.76] Power management is disabled, card already enabled.
[     79.77] Bumblebee log ended on Thu, 24 Nov 2011 13:39:53 +0100
[     17.94] Bumblebee log started at Thu, 24 Nov 2011 16:33:47 +0100
[     17.94] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.95] Making FIFO writable for members of group bumblebee
[     17.95] Power management is disabled, not disabling card on start.
[     17.96] Waiting for orders
[   7532.10] Checking for X server availability before stopping it...
[   7532.11] The X server has not started or the pidfile is invalid.
[   7532.42] X is stopped.
[   7532.42] Power management is disabled, not unloading driver
[   7532.43] Power management is disabled, card already enabled.
[   7532.44] Bumblebee log ended on Thu, 24 Nov 2011 18:39:01 +0100
[     17.55] Bumblebee log started at Thu, 24 Nov 2011 20:13:32 +0100
[     17.55] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.56] Making FIFO writable for members of group bumblebee
[     17.56] Power management is disabled, not disabling card on start.
[     17.56] Waiting for orders
[   7395.13] Checking for X server availability before stopping it...
[   7395.13] The X server has not started or the pidfile is invalid.
[   7395.14] X is stopped.
[   7395.14] Power management is disabled, not unloading driver
[   7395.14] Power management is disabled, card already enabled.
[   7395.15] Bumblebee log ended on Thu, 24 Nov 2011 22:16:29 +0100
[     16.98] Bumblebee log started at Fri, 25 Nov 2011 12:48:04 +0100
[     16.99] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.99] Making FIFO writable for members of group bumblebee
[     17.00] Power management is disabled, not disabling card on start.
[     17.00] Waiting for orders
[    255.82] Checking for X server availability before stopping it...
[    255.82] The X server has not started or the pidfile is invalid.
[    255.83] X is stopped.
[    255.83] Power management is disabled, not unloading driver
[    255.84] Power management is disabled, card already enabled.
[    255.89] Bumblebee log ended on Fri, 25 Nov 2011 12:52:03 +0100
[     19.01] Bumblebee log started at Fri, 25 Nov 2011 18:43:36 +0100
[     19.02] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.02] Making FIFO writable for members of group bumblebee
[     19.02] Power management is disabled, not disabling card on start.
[     19.02] Waiting for orders
[   8521.09] Checking for X server availability before stopping it...
[   8521.28] The X server has not started or the pidfile is invalid.
[   8521.29] X is stopped.
[   8521.29] Power management is disabled, not unloading driver
[   8521.30] Power management is disabled, card already enabled.
[   8521.30] Bumblebee log ended on Fri, 25 Nov 2011 21:05:21 +0100
[     18.21] Bumblebee log started at Sat, 26 Nov 2011 08:35:40 +0100
[     18.21] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.22] Making FIFO writable for members of group bumblebee
[     18.22] Power management is disabled, not disabling card on start.
[     18.22] Waiting for orders
[     19.89] Bumblebee log started at Sat, 26 Nov 2011 10:03:16 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[   4213.05] Checking for X server availability before stopping it...
[   4213.06] The X server has not started or the pidfile is invalid.
[   4213.06] X is stopped.
[   4213.06] Power management is disabled, not unloading driver
[   4213.07] Power management is disabled, card already enabled.
[   4213.08] Bumblebee log ended on Sat, 26 Nov 2011 11:13:09 +0100
[   4403.15] Bumblebee log started at Sat, 26 Nov 2011 11:16:19 +0100
[   4403.16] Creating fifo /var/run/bumblebee.fifo for communication...
[   4403.23] Making FIFO writable for members of group bumblebee
[   4403.29] Power management is disabled, not disabling card on start.
[   4403.29] Waiting for orders
[   4425.63] Checking for X server availability before stopping it...
[   4427.02] The X server has not started or the pidfile is invalid.
[   4427.44] X is stopped.
[   4427.45] Power management is disabled, not unloading driver
[   4427.45] Power management is disabled, card already enabled.
[   4427.46] Bumblebee log ended on Sat, 26 Nov 2011 11:16:44 +0100
[     21.97] Bumblebee log started at Sat, 26 Nov 2011 11:17:34 +0100
[     21.98] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.11] Making FIFO writable for members of group bumblebee
[     22.11] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[   1464.60] Checking for X server availability before stopping it...
[   1464.60] The X server has not started or the pidfile is invalid.
[   1464.60] X is stopped.
[   1464.61] Power management is disabled, not unloading driver
[   1464.61] Power management is disabled, card already enabled.
[   1464.62] Bumblebee log ended on Sat, 26 Nov 2011 11:41:37 +0100
[     22.08] Bumblebee log started at Sat, 26 Nov 2011 11:42:25 +0100
[     22.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.09] Making FIFO writable for members of group bumblebee
[     22.45] Unloading driver 'nouveau' on start...
[     22.73] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.73] The driver could not be unloaded on start.
[     22.73] Waiting for orders
[     20.76] Bumblebee log started at Sat, 26 Nov 2011 11:43:38 +0100
[     20.76] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.77] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     21.64] FATAL: Module nouveau is in use.
[     21.79] The driver could not be unloaded on start.
[     21.80] Waiting for orders
[     45.81] Checking for X server availability before stopping it...
[     45.95] The X server has not started or the pidfile is invalid.
[     45.95] X is stopped.
[     45.95] Unloading driver...
[     46.19] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     46.30] The driver could not be unloaded.
[     46.30] Perhaps another program is using it.
[     46.30] Enabling graphics card before stopping daemon...
[     21.03] Bumblebee log started at Sat, 26 Nov 2011 11:45:09 +0100
[     21.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.04] Making FIFO writable for members of group bumblebee
[     21.12] Unloading driver 'nouveau' on start...
[     22.81] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.81] The driver could not be unloaded on start.
[     22.81] Waiting for orders
[     20.71] Bumblebee log started at Sat, 26 Nov 2011 11:46:48 +0100
[     20.71] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.72] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     22.47] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.47] The driver could not be unloaded on start.
[     22.48] Waiting for orders
[     20.57] Bumblebee log started at Sat, 26 Nov 2011 11:48:17 +0100
[     20.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.58] Making FIFO writable for members of group bumblebee
[     20.72] Unloading driver 'nouveau' on start...
[     22.54] FATAL: Module nouveau is in use.
[     22.54] The driver could not be unloaded on start.
[     22.54] Waiting for orders
[    150.11] Optirun start request received.
[    150.12] Checking for X server availability before starting X...
[    150.12] X server is not started
[    150.13] Enabling graphics card...
[    150.21] 
[    150.21] Loading driver...
[     20.97] Bumblebee log started at Sat, 26 Nov 2011 11:51:47 +0100
[     20.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.98] Making FIFO writable for members of group bumblebee
[     20.98] Power management is disabled, not disabling card on start.
[     20.98] Waiting for orders
[     23.80] Bumblebee log started at Sat, 26 Nov 2011 16:13:22 +0100
[     23.80] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.80] Making FIFO writable for members of group bumblebee
[     23.81] Power management is disabled, not disabling card on start.
[     23.81] Waiting for orders
[     23.00] Bumblebee log started at Sat, 26 Nov 2011 19:31:52 +0100
[     23.00] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.01] Making FIFO writable for members of group bumblebee
[     23.01] Power management is disabled, not disabling card on start.
[     23.01] Waiting for orders
[   5427.84] Checking for X server availability before stopping it...
[   5427.85] The X server has not started or the pidfile is invalid.
[   5427.85] X is stopped.
[   5427.85] Power management is disabled, not unloading driver
[   5427.86] Power management is disabled, card already enabled.
[   5427.86] Bumblebee log ended on Sat, 26 Nov 2011 21:01:58 +0100
[     20.17] Bumblebee log started at Sun, 27 Nov 2011 08:37:11 +0100
[     20.18] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.18] Making FIFO writable for members of group bumblebee
[     20.18] Power management is disabled, not disabling card on start.
[     20.19] Waiting for orders
[    514.01] Optirun start request received.
[    514.01] Checking for X server availability before starting X...
[    514.02] X server is not started
[    514.02] Power management is disabled, only loading driver
[     22.43] Bumblebee log started at Sun, 27 Nov 2011 08:55:09 +0100
[     22.44] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.44] Making FIFO writable for members of group bumblebee
[     22.44] Power management is disabled, not disabling card on start.
[     22.45] Waiting for orders

Dernière modification par Sp0tnik (Le 27/11/2011, à 08:58)

djguigui · Le 27/11/2011, à 09:08

Merci pour ton aide.

Voici la réponse de "lspci -vnn | grep '\''[030[02]\]'" :

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1050] (rev ff) (prog-if ff)

Et voici l'archive générée: http://dl.dropbox.com/u/1176406/ASUSTeK … 1.0.tar.gz

Mon PC est bien sur le GitHub de bumblee et sur le site hybrid graphics, il me manque juste l'instruction du cardon.

Qid · Le 27/11/2011, à 12:21

ArchangeGabriel a écrit :

@Qid : Xorg.0.log.old s'il te plaît.

ah oui !? le old au grand complet !? ... bah écoute au prochain clash je te le donnerais :
actuellement Xorg ne plante plus suite à une petite mise a jour donc ça va

Zerbob · Le 27/11/2011, à 12:39

Ca faisait un petit moment que j'avais oublie ce forum... je viens de voir qu'ArchangeGabriel avait indique mes appels (page 32 x).
Merci beaucoup ! J'essaie ca d'ici quelques jours.
Chez moi la difference optirun/sans optirun est evidente sur urban terror et surtout sur heroes of newerth. Il faudra que j'essaie flight of the navigator ca a l'air marrant.
(desole pour l'absence d'accents je suis sur un live cd et je galere)

Fepalkon · Le 27/11/2011, à 15:27

Bonjour à tous!

J'ai essayé de lire toutes les pages pour trouver une solution à mon problème, mais rien n'y fait.

Voilà je tourne sur un Asus EeePc 1215N, sous Ubuntu 11.10, avec Bumblebee 2.4.1.

J'ai suivi les étapes d'installations, Optirun fonctionne nickel! Mais mon soucis est l'autonomie de batterie qui n'a pas changé. J'ai suivi la procédure, et édité /etc/bumblebee/cardon /etc/bumblebee/cardoff correctement il me semble.

Mais mon souci pour le moment c'est que je n'arrive simplement pas à lancer sudo bumblebee-configuration, il me répond "command not found" ?
J'ai testé sans le - , et là c'est des options qui viennent, mais rien pour configurer quoi que ce soit.

En plus ça doit vraiment être tout-bête, mais si quelqu'un à une idée ce serait sympa

PS: ayant galéré avec Ironhide, bien que la batterie tenait, il n'y avait que peu d'explications contrairement au nouveau projet Bumblebee, d'où ma "reconversion". Du coup j'ai réinstallé Ubuntu 11.10 afin d'avoir un système clean, je n'ai pas installé de pilotes Nvidia ni quoi que ce soit d'autre. (D'ailleurs, dois-je l'activer sous pilotes propriétaires?)

PS2: Il y a une marche à suivre ici , mais la dernière fois que j'ai touché au fichier Grub, c'était pas bon!!! Enfin voilà, juste pour info!

Bon dimanche à vous, que les bugs restent loins de vos machines

Dernière modification par Fepalkon (Le 27/11/2011, à 16:56)

Zerbob · Le 27/11/2011, à 16:56

Me revoilà ! Les appels m'ont l'air de marcher (il ne faut pas mettre l'antislash initial c'est ça ?) : j'obtiens une intensité de 2,1 ampères en temps normal (avec juste gnome-panel, le terminal et firefox) et 2,9 avec glxspheres.
Le ventilateur ne s'excite pas particulièrement.
Merci beaucoup pour votre aide. C'est beau à en pleurer cet esprit de coopération qui règne sous Linux (ok, je m'emporte là...).
Au fait, quelqu'un qui saurait-il s'il y a un projet de port (bien intégré) de Bumblebee sous d'autres distros ? Je pense notamment à Debian, une recherche google semble indiquer que pour l'instant il faut installer ça la main et que c'est instable (de toute façon je reste sous Ubuntu au moins jusqu'à l'été, j'ai suffisamment galéré pour tout faire marcher comme ça).

ArchangeGabriel · Le 27/11/2011, à 18:37

Sp0tnik a écrit :

@ArchangeGabriel

Je ne peux pas copier les lignes de codes, c'est pas sur la console donc pas de copié collé possible, par contre le messag d'erreur sur la console c'est:

yann@TARDIS:~$ optirun glxspheres
The Bumblebee X server was not available, please check the
Bumblebee logfile at /var/log/bumblebee.log
==================================================

et le logfile en question:

[     16.44] Bumblebee log started at Tue, 08 Nov 2011 06:46:56 +0100
[     16.45] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.45] Making FIFO writable for members of group bumblebee
[     16.45] Power management is disabled, not disabling card on start.
[     16.46] Waiting for orders
[   3340.72] Checking for X server availability before stopping it...
[   3340.72] The X server has not started or the pidfile is invalid.
[   3340.72] X is stopped.
[   3340.73] Power management is disabled, not unloading driver
[   3340.73] Power management is disabled, card already enabled.
[   3340.73] Bumblebee log ended on Tue, 08 Nov 2011 07:42:20 +0100
[     16.24] Bumblebee log started at Tue, 08 Nov 2011 12:35:00 +0100
[     16.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.25] Making FIFO writable for members of group bumblebee
[     16.27] Power management is disabled, not disabling card on start.
[     16.27] Waiting for orders
[  12359.27] Checking for X server availability before stopping it...
[  12359.27] The X server has not started or the pidfile is invalid.
[  12359.28] X is stopped.
[  12359.28] Power management is disabled, not unloading driver
[  12359.29] Power management is disabled, card already enabled.
[  12359.29] Bumblebee log ended on Tue, 08 Nov 2011 16:00:43 +0100
[     16.79] Bumblebee log started at Tue, 08 Nov 2011 19:40:33 +0100
[     16.79] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.80] Making FIFO writable for members of group bumblebee
[     16.80] Power management is disabled, not disabling card on start.
[     16.80] Waiting for orders
[  11915.85] Checking for X server availability before stopping it...
[  11917.04] The X server has not started or the pidfile is invalid.
[  11917.04] X is stopped.
[  11917.05] Power management is disabled, not unloading driver
[  11917.05] Power management is disabled, card already enabled.
[  11917.26] Bumblebee log ended on Tue, 08 Nov 2011 22:58:54 +0100
[     16.97] Bumblebee log started at Wed, 09 Nov 2011 06:47:26 +0100
[     16.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.97] Making FIFO writable for members of group bumblebee
[     16.98] Power management is disabled, not disabling card on start.
[     16.98] Waiting for orders
[   3476.50] Checking for X server availability before stopping it...
[   3476.64] The X server has not started or the pidfile is invalid.
[   3476.64] X is stopped.
[   3476.64] Power management is disabled, not unloading driver
[   3476.65] Power management is disabled, card already enabled.
[   3476.65] Bumblebee log ended on Wed, 09 Nov 2011 07:45:05 +0100
[     16.52] Bumblebee log started at Wed, 09 Nov 2011 11:28:36 +0100
[     16.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.52] Making FIFO writable for members of group bumblebee
[     16.52] Power management is disabled, not disabling card on start.
[     16.53] Waiting for orders
[    609.43] Checking for X server availability before stopping it...
[    609.43] The X server has not started or the pidfile is invalid.
[    609.44] X is stopped.
[    609.44] Power management is disabled, not unloading driver
[    609.45] Power management is disabled, card already enabled.
[    609.45] Bumblebee log ended on Wed, 09 Nov 2011 11:38:29 +0100
[     17.01] Bumblebee log started at Wed, 09 Nov 2011 12:05:02 +0100
[     17.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.01] Making FIFO writable for members of group bumblebee
[     17.02] Power management is disabled, not disabling card on start.
[     17.02] Waiting for orders
[   5833.39] Checking for X server availability before stopping it...
[   5833.40] The X server has not started or the pidfile is invalid.
[   5833.40] X is stopped.
[   5833.40] Power management is disabled, not unloading driver
[   5833.41] Power management is disabled, card already enabled.
[   5833.41] Bumblebee log ended on Wed, 09 Nov 2011 13:41:59 +0100
[     16.32] Bumblebee log started at Wed, 09 Nov 2011 18:29:56 +0100
[     16.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.33] Making FIFO writable for members of group bumblebee
[     16.33] Power management is disabled, not disabling card on start.
[     16.34] Waiting for orders
[  18394.48] Checking for X server availability before stopping it...
[  18395.07] The X server has not started or the pidfile is invalid.
[  18395.26] X is stopped.
[  18395.26] Power management is disabled, not unloading driver
[  18395.26] Power management is disabled, card already enabled.
[  18395.83] Bumblebee log ended on Wed, 09 Nov 2011 23:36:15 +0100
[     21.27] Bumblebee log started at Thu, 10 Nov 2011 06:47:15 +0100
[     21.27] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.35] Making FIFO writable for members of group bumblebee
[     21.35] Power management is disabled, not disabling card on start.
[     21.35] Waiting for orders
[   8910.41] Checking for X server availability before stopping it...
[   8910.51] The X server has not started or the pidfile is invalid.
[   8910.52] X is stopped.
[   8910.52] Power management is disabled, not unloading driver
[   8910.53] Power management is disabled, card already enabled.
[   8910.60] Bumblebee log ended on Thu, 10 Nov 2011 09:15:24 +0100
[     20.75] Bumblebee log started at Thu, 10 Nov 2011 10:57:39 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.77] Power management is disabled, not disabling card on start.
[     20.77] Waiting for orders
[   2812.67] Checking for X server availability before stopping it...
[   2812.68] The X server has not started or the pidfile is invalid.
[   2812.68] X is stopped.
[   2812.68] Power management is disabled, not unloading driver
[   2812.69] Power management is disabled, card already enabled.
[   2812.69] Bumblebee log ended on Thu, 10 Nov 2011 11:44:11 +0100
[     20.73] Bumblebee log started at Thu, 10 Nov 2011 12:24:22 +0100
[     20.74] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.74] Making FIFO writable for members of group bumblebee
[     20.74] Power management is disabled, not disabling card on start.
[     20.75] Waiting for orders
[   4897.10] Checking for X server availability before stopping it...
[   4897.11] The X server has not started or the pidfile is invalid.
[   4897.11] X is stopped.
[   4897.12] Power management is disabled, not unloading driver
[   4897.12] Power management is disabled, card already enabled.
[   4897.12] Bumblebee log ended on Thu, 10 Nov 2011 13:45:38 +0100
[     20.65] Bumblebee log started at Thu, 10 Nov 2011 17:33:19 +0100
[     20.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.65] Making FIFO writable for members of group bumblebee
[     20.66] Power management is disabled, not disabling card on start.
[     20.66] Waiting for orders
[   5043.97] Checking for X server availability before stopping it...
[   5043.98] The X server has not started or the pidfile is invalid.
[   5043.98] X is stopped.
[   5043.99] Power management is disabled, not unloading driver
[   5043.99] Power management is disabled, card already enabled.
[   5044.09] Bumblebee log ended on Thu, 10 Nov 2011 18:57:02 +0100
[     21.16] Bumblebee log started at Thu, 10 Nov 2011 20:08:43 +0100
[     21.17] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.17] Making FIFO writable for members of group bumblebee
[     21.17] Power management is disabled, not disabling card on start.
[     21.18] Waiting for orders
[   8342.80] Checking for X server availability before stopping it...
[   8343.00] The X server has not started or the pidfile is invalid.
[   8343.03] X is stopped.
[   8343.03] Power management is disabled, not unloading driver
[   8343.04] Power management is disabled, card already enabled.
[   8343.04] Bumblebee log ended on Thu, 10 Nov 2011 22:27:25 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 01:52:23 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.89] Making FIFO writable for members of group bumblebee
[     20.89] Power management is disabled, not disabling card on start.
[     20.90] Waiting for orders
[   5698.52] Checking for X server availability before stopping it...
[   5698.53] The X server has not started or the pidfile is invalid.
[   5698.55] X is stopped.
[   5698.55] Power management is disabled, not unloading driver
[   5698.56] Power management is disabled, card already enabled.
[   5698.56] Bumblebee log ended on Fri, 11 Nov 2011 03:27:01 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 11:24:39 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.90] Making FIFO writable for members of group bumblebee
[     20.91] Power management is disabled, not disabling card on start.
[     20.91] Waiting for orders
[  42591.17] Checking for X server availability before stopping it...
[  42592.47] The X server has not started or the pidfile is invalid.
[  42592.49] X is stopped.
[  42592.49] Power management is disabled, not unloading driver
[  42592.49] Power management is disabled, card already enabled.
[  42592.97] Bumblebee log ended on Fri, 11 Nov 2011 23:14:11 +0100
[     21.14] Bumblebee log started at Sat, 12 Nov 2011 08:29:00 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.20] Making FIFO writable for members of group bumblebee
[     21.21] Power management is disabled, not disabling card on start.
[     21.21] Waiting for orders
[  45863.07] Checking for X server availability before stopping it...
[  45863.38] The X server has not started or the pidfile is invalid.
[  45863.47] X is stopped.
[  45863.48] Power management is disabled, not unloading driver
[  45863.48] Power management is disabled, card already enabled.
[  45863.89] Bumblebee log ended on Sat, 12 Nov 2011 21:13:03 +0100
[     20.36] Bumblebee log started at Sun, 13 Nov 2011 10:46:54 +0100
[     20.37] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.37] Making FIFO writable for members of group bumblebee
[     20.37] Power management is disabled, not disabling card on start.
[     20.38] Waiting for orders
[     24.01] Bumblebee log started at Sun, 13 Nov 2011 11:30:49 +0100
[     24.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     24.01] Making FIFO writable for members of group bumblebee
[     24.01] Power management is disabled, not disabling card on start.
[     24.02] Waiting for orders
[  23265.98] Checking for X server availability before stopping it...
[  23266.02] The X server has not started or the pidfile is invalid.
[  23266.03] X is stopped.
[  23266.03] Power management is disabled, not unloading driver
[  23266.03] Power management is disabled, card already enabled.
[  23266.34] Bumblebee log ended on Sun, 13 Nov 2011 17:58:12 +0100
[     20.46] Bumblebee log started at Sun, 13 Nov 2011 19:07:39 +0100
[     20.46] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.46] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   3193.69] Checking for X server availability before stopping it...
[   3193.69] The X server has not started or the pidfile is invalid.
[   3193.70] X is stopped.
[   3193.71] Power management is disabled, not unloading driver
[   3193.72] Power management is disabled, card already enabled.
[   3193.80] Bumblebee log ended on Sun, 13 Nov 2011 20:00:32 +0100
[     20.52] Bumblebee log started at Sun, 13 Nov 2011 20:01:28 +0100
[     20.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.53] Making FIFO writable for members of group bumblebee
[     20.53] Power management is disabled, not disabling card on start.
[     20.54] Waiting for orders
[     30.33] Checking for X server availability before stopping it...
[     30.33] The X server has not started or the pidfile is invalid.
[     30.33] X is stopped.
[     30.34] Power management is disabled, not unloading driver
[     30.34] Power management is disabled, card already enabled.
[     30.35] Bumblebee log ended on Sun, 13 Nov 2011 20:01:38 +0100
[     20.54] Bumblebee log started at Sun, 13 Nov 2011 20:37:37 +0100
[     20.54] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.54] Making FIFO writable for members of group bumblebee
[     20.55] Power management is disabled, not disabling card on start.
[     20.55] Waiting for orders
[     20.96] Bumblebee log started at Sun, 13 Nov 2011 20:39:43 +0100
[     20.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.97] Making FIFO writable for members of group bumblebee
[     20.97] Power management is disabled, not disabling card on start.
[     20.97] Waiting for orders
[     22.46] Bumblebee log started at Sun, 13 Nov 2011 23:12:21 +0100
[     22.47] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.47] Making FIFO writable for members of group bumblebee
[     22.47] Power management is disabled, not disabling card on start.
[     22.48] Waiting for orders
[    591.80] Checking for X server availability before stopping it...
[    591.80] The X server has not started or the pidfile is invalid.
[    591.80] X is stopped.
[    592.12] Power management is disabled, not unloading driver
[    592.12] Power management is disabled, card already enabled.
[    592.13] Bumblebee log ended on Sun, 13 Nov 2011 23:21:50 +0100
[     20.16] Bumblebee log started at Mon, 14 Nov 2011 06:47:06 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.17] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   3552.88] Checking for X server availability before stopping it...
[   3553.31] The X server has not started or the pidfile is invalid.
[   3553.32] X is stopped.
[   3553.32] Power management is disabled, not unloading driver
[   3553.32] Power management is disabled, card already enabled.
[   3553.43] Bumblebee log ended on Mon, 14 Nov 2011 07:46:00 +0100
[     22.09] Bumblebee log started at Mon, 14 Nov 2011 12:42:18 +0100
[     22.10] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.10] Making FIFO writable for members of group bumblebee
[     22.10] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[  11942.56] Checking for X server availability before stopping it...
[  11942.56] The X server has not started or the pidfile is invalid.
[  11942.56] X is stopped.
[  11942.57] Power management is disabled, not unloading driver
[  11942.57] Power management is disabled, card already enabled.
[  11942.57] Bumblebee log ended on Mon, 14 Nov 2011 16:00:59 +0100
[     20.58] Bumblebee log started at Mon, 14 Nov 2011 17:56:36 +0100
[     20.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.59] Making FIFO writable for members of group bumblebee
[     20.59] Power management is disabled, not disabling card on start.
[     20.59] Waiting for orders
[  15369.22] Checking for X server availability before stopping it...
[  15369.23] The X server has not started or the pidfile is invalid.
[  15369.23] X is stopped.
[  15369.24] Power management is disabled, not unloading driver
[  15369.25] Power management is disabled, card already enabled.
[  15369.30] Bumblebee log ended on Mon, 14 Nov 2011 22:12:25 +0100
[     21.05] Bumblebee log started at Tue, 15 Nov 2011 06:46:53 +0100
[     21.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.05] Making FIFO writable for members of group bumblebee
[     21.06] Power management is disabled, not disabling card on start.
[     21.06] Waiting for orders
[   3450.03] Checking for X server availability before stopping it...
[   3450.28] The X server has not started or the pidfile is invalid.
[   3450.29] X is stopped.
[   3450.29] Power management is disabled, not unloading driver
[   3450.29] Power management is disabled, card already enabled.
[   3450.31] Bumblebee log ended on Tue, 15 Nov 2011 07:44:03 +0100
[     20.25] Bumblebee log started at Tue, 15 Nov 2011 12:33:05 +0100
[     20.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.26] Making FIFO writable for members of group bumblebee
[     20.26] Power management is disabled, not disabling card on start.
[     20.26] Waiting for orders
[    108.94] Checking for X server availability before stopping it...
[    108.96] The X server has not started or the pidfile is invalid.
[    108.97] X is stopped.
[    108.97] Power management is disabled, not unloading driver
[    108.97] Power management is disabled, card already enabled.
[    108.98] Bumblebee log ended on Tue, 15 Nov 2011 12:34:33 +0100
[     20.48] Bumblebee log started at Tue, 15 Nov 2011 12:35:23 +0100
[     20.49] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.49] Making FIFO writable for members of group bumblebee
[     20.50] Power management is disabled, not disabling card on start.
[     20.50] Waiting for orders
[   4402.43] Checking for X server availability before stopping it...
[   4402.44] The X server has not started or the pidfile is invalid.
[   4402.44] X is stopped.
[   4402.45] Power management is disabled, not unloading driver
[   4402.46] Power management is disabled, card already enabled.
[   4402.63] Bumblebee log ended on Tue, 15 Nov 2011 13:48:25 +0100
[     43.95] Bumblebee log started at Tue, 15 Nov 2011 14:46:28 +0100
[     43.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.96] Making FIFO writable for members of group bumblebee
[     43.96] Power management is disabled, not disabling card on start.
[     43.97] Waiting for orders
[  19830.85] Checking for X server availability before stopping it...
[  19831.14] The X server has not started or the pidfile is invalid.
[  19831.21] X is stopped.
[  19831.22] Power management is disabled, not unloading driver
[  19831.23] Power management is disabled, card already enabled.
[  19831.28] Bumblebee log ended on Tue, 15 Nov 2011 20:16:16 +0100
[     20.95] Bumblebee log started at Tue, 15 Nov 2011 20:17:08 +0100
[     20.95] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.95] Making FIFO writable for members of group bumblebee
[     20.96] Power management is disabled, not disabling card on start.
[     20.96] Waiting for orders
[   2290.72] Checking for X server availability before stopping it...
[   2290.72] The X server has not started or the pidfile is invalid.
[   2290.73] X is stopped.
[   2290.73] Power management is disabled, not unloading driver
[   2290.73] Power management is disabled, card already enabled.
[   2290.74] Bumblebee log ended on Tue, 15 Nov 2011 20:54:58 +0100
[     20.14] Bumblebee log started at Wed, 16 Nov 2011 01:16:44 +0100
[     20.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.15] Making FIFO writable for members of group bumblebee
[     20.15] Power management is disabled, not disabling card on start.
[     20.15] Waiting for orders
[    523.29] Checking for X server availability before stopping it...
[    523.30] The X server has not started or the pidfile is invalid.
[    523.30] X is stopped.
[    523.30] Power management is disabled, not unloading driver
[    523.31] Power management is disabled, card already enabled.
[    523.31] Bumblebee log ended on Wed, 16 Nov 2011 01:25:08 +0100
[     19.77] Bumblebee log started at Wed, 16 Nov 2011 06:46:47 +0100
[     19.78] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.78] Making FIFO writable for members of group bumblebee
[     19.78] Power management is disabled, not disabling card on start.
[     19.79] Waiting for orders
[   3232.13] Checking for X server availability before stopping it...
[   3232.13] The X server has not started or the pidfile is invalid.
[   3232.13] X is stopped.
[   3232.14] Power management is disabled, not unloading driver
[   3232.14] Power management is disabled, card already enabled.
[   3232.14] Bumblebee log ended on Wed, 16 Nov 2011 07:40:19 +0100
[     20.29] Bumblebee log started at Wed, 16 Nov 2011 12:46:46 +0100
[     20.29] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.29] Making FIFO writable for members of group bumblebee
[     20.30] Power management is disabled, not disabling card on start.
[     20.30] Waiting for orders
[   3384.20] Checking for X server availability before stopping it...
[   3384.27] The X server has not started or the pidfile is invalid.
[   3384.28] X is stopped.
[   3384.28] Power management is disabled, not unloading driver
[   3384.29] Power management is disabled, card already enabled.
[   3384.36] Bumblebee log ended on Wed, 16 Nov 2011 13:42:50 +0100
[     20.75] Bumblebee log started at Wed, 16 Nov 2011 17:24:38 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.76] Power management is disabled, not disabling card on start.
[     20.76] Waiting for orders
[  13407.70] Checking for X server availability before stopping it...
[  13407.73] The X server has not started or the pidfile is invalid.
[  13407.73] X is stopped.
[  13407.74] Power management is disabled, not unloading driver
[  13407.75] Power management is disabled, card already enabled.
[  13407.79] Bumblebee log ended on Wed, 16 Nov 2011 21:07:45 +0100
[     20.16] Bumblebee log started at Wed, 16 Nov 2011 23:27:45 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.16] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   1742.36] Checking for X server availability before stopping it...
[   1742.37] The X server has not started or the pidfile is invalid.
[   1743.42] X is stopped.
[   1743.42] Power management is disabled, not unloading driver
[   1743.43] Power management is disabled, card already enabled.
[   1743.64] Bumblebee log ended on Wed, 16 Nov 2011 23:56:29 +0100
[     20.67] Bumblebee log started at Thu, 17 Nov 2011 06:46:35 +0100
[     20.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.67] Making FIFO writable for members of group bumblebee
[     20.68] Power management is disabled, not disabling card on start.
[     20.68] Waiting for orders
[   3526.34] Checking for X server availability before stopping it...
[   3526.38] The X server has not started or the pidfile is invalid.
[   3526.39] X is stopped.
[   3526.39] Power management is disabled, not unloading driver
[   3526.39] Power management is disabled, card already enabled.
[   3527.34] Bumblebee log ended on Thu, 17 Nov 2011 07:45:02 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 12:54:41 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.22] Making FIFO writable for members of group bumblebee
[     19.22] Power management is disabled, not disabling card on start.
[     19.22] Waiting for orders
[   2968.99] Checking for X server availability before stopping it...
[   2968.99] The X server has not started or the pidfile is invalid.
[   2969.00] X is stopped.
[   2969.00] Power management is disabled, not unloading driver
[   2969.01] Power management is disabled, card already enabled.
[   2969.10] Bumblebee log ended on Thu, 17 Nov 2011 13:43:51 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 17:29:29 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.08] Making FIFO writable for members of group bumblebee
[     19.08] Power management is disabled, not disabling card on start.
[     19.08] Waiting for orders
[     21.14] Bumblebee log started at Fri, 18 Nov 2011 06:46:47 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.16] Making FIFO writable for members of group bumblebee
[     21.16] Power management is disabled, not disabling card on start.
[     21.16] Waiting for orders
[   3495.04] Checking for X server availability before stopping it...
[   3495.04] The X server has not started or the pidfile is invalid.
[   3495.08] X is stopped.
[   3495.08] Power management is disabled, not unloading driver
[   3495.08] Power management is disabled, card already enabled.
[   3495.09] Bumblebee log ended on Fri, 18 Nov 2011 07:44:41 +0100
[     18.83] Bumblebee log started at Fri, 18 Nov 2011 12:45:03 +0100
[     18.85] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.85] Making FIFO writable for members of group bumblebee
[     18.86] Power management is disabled, not disabling card on start.
[     18.86] Waiting for orders
[   1814.24] Checking for X server availability before stopping it...
[   1814.25] The X server has not started or the pidfile is invalid.
[   1814.25] X is stopped.
[   1814.26] Power management is disabled, not unloading driver
[   1814.26] Power management is disabled, card already enabled.
[   1814.47] Bumblebee log ended on Fri, 18 Nov 2011 13:14:59 +0100
[     19.12] Bumblebee log started at Fri, 18 Nov 2011 16:12:42 +0100
[     19.13] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.13] Making FIFO writable for members of group bumblebee
[     19.14] Power management is disabled, not disabling card on start.
[     19.14] Waiting for orders
[  24725.05] Checking for X server availability before stopping it...
[  24726.37] The X server has not started or the pidfile is invalid.
[  24726.38] X is stopped.
[  24726.50] Power management is disabled, not unloading driver
[  24726.51] Power management is disabled, card already enabled.
[  24726.54] Bumblebee log ended on Fri, 18 Nov 2011 23:04:30 +0100
[     19.57] Bumblebee log started at Sat, 19 Nov 2011 08:38:16 +0100
[     19.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.57] Making FIFO writable for members of group bumblebee
[     19.58] Power management is disabled, not disabling card on start.
[     19.58] Waiting for orders
[     21.77] Bumblebee log started at Sat, 19 Nov 2011 17:13:09 +0100
[     21.77] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.78] Making FIFO writable for members of group bumblebee
[     21.78] Power management is disabled, not disabling card on start.
[     21.78] Waiting for orders
[  16485.45] Checking for X server availability before stopping it...
[  16485.52] The X server has not started or the pidfile is invalid.
[  16485.52] X is stopped.
[  16485.52] Power management is disabled, not unloading driver
[  16485.53] Power management is disabled, card already enabled.
[  16485.76] Bumblebee log ended on Sat, 19 Nov 2011 21:47:33 +0100
[     18.92] Bumblebee log started at Sun, 20 Nov 2011 08:51:59 +0100
[     18.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.93] Making FIFO writable for members of group bumblebee
[     18.93] Power management is disabled, not disabling card on start.
[     18.94] Waiting for orders
[     23.57] Bumblebee log started at Sun, 20 Nov 2011 20:59:30 +0100
[     23.58] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.58] Making FIFO writable for members of group bumblebee
[     23.58] Power management is disabled, not disabling card on start.
[     23.58] Waiting for orders
[     21.67] Bumblebee log started at Sun, 20 Nov 2011 21:48:34 +0100
[     21.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.68] Making FIFO writable for members of group bumblebee
[     21.68] Power management is disabled, not disabling card on start.
[     21.68] Waiting for orders
[   3189.55] Checking for X server availability before stopping it...
[   3189.56] The X server has not started or the pidfile is invalid.
[   3189.57] X is stopped.
[   3189.58] Power management is disabled, not unloading driver
[   3189.58] Power management is disabled, card already enabled.
[   3189.61] Bumblebee log ended on Sun, 20 Nov 2011 22:41:22 +0100
[     19.89] Bumblebee log started at Sun, 20 Nov 2011 22:49:29 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[    463.22] Checking for X server availability before stopping it...
[    463.23] The X server has not started or the pidfile is invalid.
[    463.23] X is stopped.
[    463.24] Power management is disabled, not unloading driver
[    463.24] Power management is disabled, card already enabled.
[    463.25] Bumblebee log ended on Sun, 20 Nov 2011 22:56:52 +0100
[     19.92] Bumblebee log started at Mon, 21 Nov 2011 06:46:41 +0100
[     19.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.93] Making FIFO writable for members of group bumblebee
[     19.93] Power management is disabled, not disabling card on start.
[     19.93] Waiting for orders
[     20.40] Bumblebee log started at Mon, 21 Nov 2011 12:27:26 +0100
[     20.41] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.47] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   2837.24] Checking for X server availability before stopping it...
[   2837.25] The X server has not started or the pidfile is invalid.
[   2837.25] X is stopped.
[   2837.25] Power management is disabled, not unloading driver
[   2837.26] Power management is disabled, card already enabled.
[   2837.27] Bumblebee log ended on Mon, 21 Nov 2011 13:14:23 +0100
[     20.04] Bumblebee log started at Mon, 21 Nov 2011 17:54:00 +0100
[     20.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.04] Making FIFO writable for members of group bumblebee
[     20.05] Power management is disabled, not disabling card on start.
[     20.05] Waiting for orders
[   5298.95] Checking for X server availability before stopping it...
[   5299.08] The X server has not started or the pidfile is invalid.
[   5299.09] X is stopped.
[   5299.09] Power management is disabled, not unloading driver
[   5299.10] Power management is disabled, card already enabled.
[   5299.10] Bumblebee log ended on Mon, 21 Nov 2011 19:21:59 +0100
[     19.14] Bumblebee log started at Mon, 21 Nov 2011 21:43:17 +0100
[     19.15] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.15] Making FIFO writable for members of group bumblebee
[     19.15] Power management is disabled, not disabling card on start.
[     19.16] Waiting for orders
[   5920.55] Checking for X server availability before stopping it...
[   5920.55] The X server has not started or the pidfile is invalid.
[   5920.55] X is stopped.
[   5920.56] Power management is disabled, not unloading driver
[   5920.56] Power management is disabled, card already enabled.
[   5920.56] Bumblebee log ended on Mon, 21 Nov 2011 23:21:39 +0100
[     19.38] Bumblebee log started at Tue, 22 Nov 2011 06:46:40 +0100
[     19.39] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.39] Making FIFO writable for members of group bumblebee
[     19.39] Power management is disabled, not disabling card on start.
[     19.40] Waiting for orders
[   3549.94] Checking for X server availability before stopping it...
[   3549.94] The X server has not started or the pidfile is invalid.
[   3549.95] X is stopped.
[   3549.96] Power management is disabled, not unloading driver
[   3549.96] Power management is disabled, card already enabled.
[   3549.97] Bumblebee log ended on Tue, 22 Nov 2011 07:45:30 +0100
[     19.59] Bumblebee log started at Tue, 22 Nov 2011 12:46:40 +0100
[     19.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.60] Making FIFO writable for members of group bumblebee
[     19.60] Power management is disabled, not disabling card on start.
[     19.60] Waiting for orders
[   1400.37] Checking for X server availability before stopping it...
[   1400.38] The X server has not started or the pidfile is invalid.
[   1400.38] X is stopped.
[   1400.38] Power management is disabled, not unloading driver
[   1400.39] Power management is disabled, card already enabled.
[   1400.40] Bumblebee log ended on Tue, 22 Nov 2011 13:09:41 +0100
[     19.64] Bumblebee log started at Tue, 22 Nov 2011 16:02:09 +0100
[     19.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.65] Making FIFO writable for members of group bumblebee
[     19.65] Power management is disabled, not disabling card on start.
[     19.65] Waiting for orders
[     94.77] Checking for X server availability before stopping it...
[     94.77] The X server has not started or the pidfile is invalid.
[     94.78] X is stopped.
[     94.78] Power management is disabled, not unloading driver
[     94.78] Power management is disabled, card already enabled.
[     94.78] Bumblebee log ended on Tue, 22 Nov 2011 16:03:24 +0100
[     18.85] Bumblebee log started at Tue, 22 Nov 2011 18:44:32 +0100
[     18.86] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.87] Making FIFO writable for members of group bumblebee
[     18.87] Power management is disabled, not disabling card on start.
[     18.88] Waiting for orders
[     22.72] Bumblebee log started at Wed, 23 Nov 2011 06:47:17 +0100
[     22.72] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.73] Making FIFO writable for members of group bumblebee
[     22.73] Power management is disabled, not disabling card on start.
[     22.73] Waiting for orders
[   3447.68] Checking for X server availability before stopping it...
[   3447.79] The X server has not started or the pidfile is invalid.
[   3447.80] X is stopped.
[   3447.80] Power management is disabled, not unloading driver
[   3447.80] Power management is disabled, card already enabled.
[   3447.81] Bumblebee log ended on Wed, 23 Nov 2011 07:44:22 +0100
[     21.92] Bumblebee log started at Wed, 23 Nov 2011 12:52:01 +0100
[     21.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.08] Making FIFO writable for members of group bumblebee
[     22.08] Power management is disabled, not disabling card on start.
[     22.08] Waiting for orders
[   3220.90] Checking for X server availability before stopping it...
[   3220.90] The X server has not started or the pidfile is invalid.
[   3220.90] X is stopped.
[   3220.90] Power management is disabled, not unloading driver
[   3220.91] Power management is disabled, card already enabled.
[   3220.99] Bumblebee log ended on Wed, 23 Nov 2011 13:45:20 +0100
[     17.38] Bumblebee log started at Wed, 23 Nov 2011 16:13:44 +0100
[     17.38] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.39] Making FIFO writable for members of group bumblebee
[     17.39] Power management is disabled, not disabling card on start.
[     17.39] Waiting for orders
[   8018.44] Checking for X server availability before stopping it...
[   8018.45] The X server has not started or the pidfile is invalid.
[   8018.45] X is stopped.
[   8018.47] Power management is disabled, not unloading driver
[   8018.48] Power management is disabled, card already enabled.
[   8018.65] Bumblebee log ended on Wed, 23 Nov 2011 18:27:05 +0100
[     17.65] Bumblebee log started at Wed, 23 Nov 2011 18:41:43 +0100
[     17.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.65] Making FIFO writable for members of group bumblebee
[     17.66] Power management is disabled, not disabling card on start.
[     17.66] Waiting for orders
[     67.47] Checking for X server availability before stopping it...
[     67.61] The X server has not started or the pidfile is invalid.
[     67.61] X is stopped.
[     67.61] Power management is disabled, not unloading driver
[     67.61] Power management is disabled, card already enabled.
[     67.62] Bumblebee log ended on Wed, 23 Nov 2011 18:42:33 +0100
[     17.63] Bumblebee log started at Wed, 23 Nov 2011 21:23:59 +0100
[     17.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.64] Making FIFO writable for members of group bumblebee
[     17.64] Power management is disabled, not disabling card on start.
[     17.65] Waiting for orders
[   4045.12] Checking for X server availability before stopping it...
[   4045.13] The X server has not started or the pidfile is invalid.
[   4045.13] X is stopped.
[   4045.14] Power management is disabled, not unloading driver
[   4045.14] Power management is disabled, card already enabled.
[   4045.31] Bumblebee log ended on Wed, 23 Nov 2011 22:31:07 +0100
[     17.33] Bumblebee log started at Thu, 24 Nov 2011 06:47:11 +0100
[     17.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.33] Making FIFO writable for members of group bumblebee
[     17.34] Power management is disabled, not disabling card on start.
[     17.34] Waiting for orders
[     43.01] Bumblebee log started at Thu, 24 Nov 2011 07:07:24 +0100
[     43.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.02] Making FIFO writable for members of group bumblebee
[     43.02] Power management is disabled, not disabling card on start.
[     43.02] Waiting for orders
[   1987.64] Checking for X server availability before stopping it...
[   1987.65] The X server has not started or the pidfile is invalid.
[   1987.66] X is stopped.
[   1987.67] Power management is disabled, not unloading driver
[   1987.74] Power management is disabled, card already enabled.
[   1987.75] Bumblebee log ended on Thu, 24 Nov 2011 07:39:49 +0100
[     17.22] Bumblebee log started at Thu, 24 Nov 2011 12:55:22 +0100
[     17.22] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.24] Making FIFO writable for members of group bumblebee
[     17.26] Power management is disabled, not disabling card on start.
[     17.26] Waiting for orders
[   2576.05] Checking for X server availability before stopping it...
[   2576.17] The X server has not started or the pidfile is invalid.
[   2576.17] X is stopped.
[   2576.17] Power management is disabled, not unloading driver
[   2576.18] Power management is disabled, card already enabled.
[   2576.51] Bumblebee log ended on Thu, 24 Nov 2011 13:38:02 +0100
[     18.04] Bumblebee log started at Thu, 24 Nov 2011 13:38:51 +0100
[     18.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.05] Making FIFO writable for members of group bumblebee
[     18.05] Power management is disabled, not disabling card on start.
[     18.05] Waiting for orders
[     79.64] Checking for X server availability before stopping it...
[     79.76] The X server has not started or the pidfile is invalid.
[     79.76] X is stopped.
[     79.76] Power management is disabled, not unloading driver
[     79.76] Power management is disabled, card already enabled.
[     79.77] Bumblebee log ended on Thu, 24 Nov 2011 13:39:53 +0100
[     17.94] Bumblebee log started at Thu, 24 Nov 2011 16:33:47 +0100
[     17.94] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.95] Making FIFO writable for members of group bumblebee
[     17.95] Power management is disabled, not disabling card on start.
[     17.96] Waiting for orders
[   7532.10] Checking for X server availability before stopping it...
[   7532.11] The X server has not started or the pidfile is invalid.
[   7532.42] X is stopped.
[   7532.42] Power management is disabled, not unloading driver
[   7532.43] Power management is disabled, card already enabled.
[   7532.44] Bumblebee log ended on Thu, 24 Nov 2011 18:39:01 +0100
[     17.55] Bumblebee log started at Thu, 24 Nov 2011 20:13:32 +0100
[     17.55] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.56] Making FIFO writable for members of group bumblebee
[     17.56] Power management is disabled, not disabling card on start.
[     17.56] Waiting for orders
[   7395.13] Checking for X server availability before stopping it...
[   7395.13] The X server has not started or the pidfile is invalid.
[   7395.14] X is stopped.
[   7395.14] Power management is disabled, not unloading driver
[   7395.14] Power management is disabled, card already enabled.
[   7395.15] Bumblebee log ended on Thu, 24 Nov 2011 22:16:29 +0100
[     16.98] Bumblebee log started at Fri, 25 Nov 2011 12:48:04 +0100
[     16.99] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.99] Making FIFO writable for members of group bumblebee
[     17.00] Power management is disabled, not disabling card on start.
[     17.00] Waiting for orders
[    255.82] Checking for X server availability before stopping it...
[    255.82] The X server has not started or the pidfile is invalid.
[    255.83] X is stopped.
[    255.83] Power management is disabled, not unloading driver
[    255.84] Power management is disabled, card already enabled.
[    255.89] Bumblebee log ended on Fri, 25 Nov 2011 12:52:03 +0100
[     19.01] Bumblebee log started at Fri, 25 Nov 2011 18:43:36 +0100
[     19.02] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.02] Making FIFO writable for members of group bumblebee
[     19.02] Power management is disabled, not disabling card on start.
[     19.02] Waiting for orders
[   8521.09] Checking for X server availability before stopping it...
[   8521.28] The X server has not started or the pidfile is invalid.
[   8521.29] X is stopped.
[   8521.29] Power management is disabled, not unloading driver
[   8521.30] Power management is disabled, card already enabled.
[   8521.30] Bumblebee log ended on Fri, 25 Nov 2011 21:05:21 +0100
[     18.21] Bumblebee log started at Sat, 26 Nov 2011 08:35:40 +0100
[     18.21] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.22] Making FIFO writable for members of group bumblebee
[     18.22] Power management is disabled, not disabling card on start.
[     18.22] Waiting for orders
[     19.89] Bumblebee log started at Sat, 26 Nov 2011 10:03:16 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[   4213.05] Checking for X server availability before stopping it...
[   4213.06] The X server has not started or the pidfile is invalid.
[   4213.06] X is stopped.
[   4213.06] Power management is disabled, not unloading driver
[   4213.07] Power management is disabled, card already enabled.
[   4213.08] Bumblebee log ended on Sat, 26 Nov 2011 11:13:09 +0100
[   4403.15] Bumblebee log started at Sat, 26 Nov 2011 11:16:19 +0100
[   4403.16] Creating fifo /var/run/bumblebee.fifo for communication...
[   4403.23] Making FIFO writable for members of group bumblebee
[   4403.29] Power management is disabled, not disabling card on start.
[   4403.29] Waiting for orders
[   4425.63] Checking for X server availability before stopping it...
[   4427.02] The X server has not started or the pidfile is invalid.
[   4427.44] X is stopped.
[   4427.45] Power management is disabled, not unloading driver
[   4427.45] Power management is disabled, card already enabled.
[   4427.46] Bumblebee log ended on Sat, 26 Nov 2011 11:16:44 +0100
[     21.97] Bumblebee log started at Sat, 26 Nov 2011 11:17:34 +0100
[     21.98] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.11] Making FIFO writable for members of group bumblebee
[     22.11] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[   1464.60] Checking for X server availability before stopping it...
[   1464.60] The X server has not started or the pidfile is invalid.
[   1464.60] X is stopped.
[   1464.61] Power management is disabled, not unloading driver
[   1464.61] Power management is disabled, card already enabled.
[   1464.62] Bumblebee log ended on Sat, 26 Nov 2011 11:41:37 +0100
[     22.08] Bumblebee log started at Sat, 26 Nov 2011 11:42:25 +0100
[     22.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.09] Making FIFO writable for members of group bumblebee
[     22.45] Unloading driver 'nouveau' on start...
[     22.73] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.73] The driver could not be unloaded on start.
[     22.73] Waiting for orders
[     20.76] Bumblebee log started at Sat, 26 Nov 2011 11:43:38 +0100
[     20.76] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.77] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     21.64] FATAL: Module nouveau is in use.
[     21.79] The driver could not be unloaded on start.
[     21.80] Waiting for orders
[     45.81] Checking for X server availability before stopping it...
[     45.95] The X server has not started or the pidfile is invalid.
[     45.95] X is stopped.
[     45.95] Unloading driver...
[     46.19] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     46.30] The driver could not be unloaded.
[     46.30] Perhaps another program is using it.
[     46.30] Enabling graphics card before stopping daemon...
[     21.03] Bumblebee log started at Sat, 26 Nov 2011 11:45:09 +0100
[     21.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.04] Making FIFO writable for members of group bumblebee
[     21.12] Unloading driver 'nouveau' on start...
[     22.81] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.81] The driver could not be unloaded on start.
[     22.81] Waiting for orders
[     20.71] Bumblebee log started at Sat, 26 Nov 2011 11:46:48 +0100
[     20.71] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.72] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     22.47] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.47] The driver could not be unloaded on start.
[     22.48] Waiting for orders
[     20.57] Bumblebee log started at Sat, 26 Nov 2011 11:48:17 +0100
[     20.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.58] Making FIFO writable for members of group bumblebee
[     20.72] Unloading driver 'nouveau' on start...
[     22.54] FATAL: Module nouveau is in use.
[     22.54] The driver could not be unloaded on start.
[     22.54] Waiting for orders
[    150.11] Optirun start request received.
[    150.12] Checking for X server availability before starting X...
[    150.12] X server is not started
[    150.13] Enabling graphics card...
[    150.21] 
[    150.21] Loading driver...
[     20.97] Bumblebee log started at Sat, 26 Nov 2011 11:51:47 +0100
[     20.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.98] Making FIFO writable for members of group bumblebee
[     20.98] Power management is disabled, not disabling card on start.
[     20.98] Waiting for orders
[     23.80] Bumblebee log started at Sat, 26 Nov 2011 16:13:22 +0100
[     23.80] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.80] Making FIFO writable for members of group bumblebee
[     23.81] Power management is disabled, not disabling card on start.
[     23.81] Waiting for orders
[     23.00] Bumblebee log started at Sat, 26 Nov 2011 19:31:52 +0100
[     23.00] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.01] Making FIFO writable for members of group bumblebee
[     23.01] Power management is disabled, not disabling card on start.
[     23.01] Waiting for orders
[   5427.84] Checking for X server availability before stopping it...
[   5427.85] The X server has not started or the pidfile is invalid.
[   5427.85] X is stopped.
[   5427.85] Power management is disabled, not unloading driver
[   5427.86] Power management is disabled, card already enabled.
[   5427.86] Bumblebee log ended on Sat, 26 Nov 2011 21:01:58 +0100
[     20.17] Bumblebee log started at Sun, 27 Nov 2011 08:37:11 +0100
[     20.18] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.18] Making FIFO writable for members of group bumblebee
[     20.18] Power management is disabled, not disabling card on start.
[     20.19] Waiting for orders
[    514.01] Optirun start request received.
[    514.01] Checking for X server availability before starting X...
[    514.02] X server is not started
[    514.02] Power management is disabled, only loading driver
[     22.43] Bumblebee log started at Sun, 27 Nov 2011 08:55:09 +0100
[     22.44] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.44] Making FIFO writable for members of group bumblebee
[     22.44] Power management is disabled, not disabling card on start.
[     22.45] Waiting for orders

Dans un terminal :

sudo gedit /etc/modprobe.d/blacklist-nouveau.conf

Une fenêtre s'ouvre, tu copies :

blacklist nouveau

Tu sauves, tu fermes, et dans le terminal :

sudo update-initramfs -u

Reboot. Essaye optirun à nouveau.

djguigui a écrit :

Merci pour ton aide.
Voici la réponse de "lspci -vnn | grep '\''[030[02]\]'" :
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1050] (rev ff) (prog-if ff)
Et voici l'archive générée: http://dl.dropbox.com/u/1176406/ASUSTeK … 1.0.tar.gz
Mon PC est bien sur le GitHub de bumblee et sur le site hybrid graphics, il me manque juste l'instruction du cardon.

Je regarde ça dès que j'ai le temps.

Fepalkon a écrit :

Bonjour à tous!
J'ai essayé de lire toutes les pages pour trouver une solution à mon problème, mais rien n'y fait.
Voilà je tourne sur un Asus EeePc 1215N, sous Ubuntu 11.10, avec Bumblebee 2.4.1.
J'ai suivi les étapes d'installations, Optirun fonctionne nickel! Mais mon soucis est l'autonomie de batterie qui n'a pas changé. J'ai suivi la procédure, et édité /etc/bumblebee/cardon /etc/bumblebee/cardoff correctement il me semble.
Mais mon souci pour le moment c'est que je n'arrive simplement pas à lancer sudo bumblebee-configuration, il me répond "command not found" ?
J'ai testé sans le - , et là c'est des options qui viennent, mais rien pour configurer quoi que ce soit.
En plus ça doit vraiment être tout-bête, mais si quelqu'un à une idée ce serait sympa
PS: ayant galéré avec Ironhide, bien que la batterie tenait, il n'y avait que peu d'explications contrairement au nouveau projet Bumblebee, d'où ma "reconversion". Du coup j'ai réinstallé Ubuntu 11.10 afin d'avoir un système clean, je n'ai pas installé de pilotes Nvidia ni quoi que ce soit d'autre. (D'ailleurs, dois-je l'activer sous pilotes propriétaires?)
PS2: Il y a une marche à suivre ici , mais la dernière fois que j'ai touché au fichier Grub, c'était pas bon!!! Enfin voilà, juste pour info!
Bon dimanche à vous, que les bugs restent loins de vos machines

bumblebee-configuration, ça n'existe plus puisque c'est inutile. Suis bien la procédure dans mon premier post pour activer le power management.

Zerbob a écrit :

Me revoilà ! Les appels m'ont l'air de marcher (il ne faut pas mettre l'antislash initial c'est ça ?) : j'obtiens une intensité de 2,1 ampères en temps normal (avec juste gnome-panel, le terminal et firefox) et 2,9 avec glxspheres.
Le ventilateur ne s'excite pas particulièrement.
Merci beaucoup pour votre aide. C'est beau à en pleurer cet esprit de coopération qui règne sous Linux (ok, je m'emporte là...).
Au fait, quelqu'un qui saurait-il s'il y a un projet de port (bien intégré) de Bumblebee sous d'autres distros ? Je pense notamment à Debian, une recherche google semble indiquer que pour l'instant il faut installer ça la main et que c'est instable (de toute façon je reste sous Ubuntu au moins jusqu'à l'été, j'ai suffisamment galéré pour tout faire marcher comme ça).

Il FAUT mette l'anti-slash !!! Donc actuellement, ça doit être désactivé. Oui, tu as une différence, car la carte consomme plus quand elle fait quelque chose.

ArchangeGabriel · Le 27/11/2011, à 18:45

@djguigui :
Cardon :

\_SB.PCI0.PEGR.GFX0._PS0

Cardoff :

\_SB.PCI0.PEGR.GFX0._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x1A {0x1,0x0,0x0,0x3}
\_SB.PCI0.PEGR.GFX0._PS3

Fepalkon · Le 27/11/2011, à 20:40

@ ArchangeGabriel

Merci pour ta réponse si rapide, du coup je comprend mieux en relisant. Je suis passé à Linux depuis la semaine passée, et j'essaie de comprendre les bases de linux qui ne sont pas encore évidentes (ex: comprendre si un programme tourne ou pas etc...) Bref!

Toutefois j'ai quand même effectué une manip qui m'a fait gagner 1h de batterie.

Dans le fichier grub, mettre:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1"

Attention, ceci fonctionne pour ma configuration et pas forcément celle des autres. Ne pas prendre pour un acquis, pour plus d'info voir ici.

Je suis passé de 1600mA à 1400mA avec la manipulation décrite sur ce forum en page 1.
Et de 1400mA à 1100mA avec cette dernière manipulation.

Donc de 2h55 de batterie (avant toute manipulation) à 4h55 (après). C'est déjà ça

Si je peux aider d'une manière ou d'une autre c'est avec plaisir.

Merci à tous pour vos efforts

Dernière modification par Fepalkon (Le 27/11/2011, à 20:42)

ArchangeGabriel · Le 27/11/2011, à 21:08

Pour la manip que tu indiques, il s'agit d'une solution temporaire pour un bug introduit par le kernel 3.0 en fait, qui sera corrigé par le 3.2 ou 3.3 plus probablement.

Du coup, si passer ces options maintenant marche, il faudra faire attention à changer ces options lors de la mise à jour vers le kernel correspondant.

Anthony25 · Le 28/11/2011, à 01:20

Fepalkon a écrit :

Toutefois j'ai quand même effectué une manip qui m'a fait gagner 1h de batterie.
Dans le fichier grub, mettre:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1"

Le problème c'est que chez moi "i915.i915_enable_rc6=1" provoque des saccades avec gnome-shell, car ça active l'économie d'énergie de la carte graphique intégrée...

Sp0tnik · Le 28/11/2011, à 07:06

@ArchangeGabriel

Une fenêtre s'ouvre, tu copies :
blacklist nouveau

Veux bien dire copié/collé dans le fichier fraichement ouvert? Si oui, j'ai le même message d'erreur que précédemment avec le nouveau logfile:

[     16.44] Bumblebee log started at Tue, 08 Nov 2011 06:46:56 +0100
[     16.45] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.45] Making FIFO writable for members of group bumblebee
[     16.45] Power management is disabled, not disabling card on start.
[     16.46] Waiting for orders
[   3340.72] Checking for X server availability before stopping it...
[   3340.72] The X server has not started or the pidfile is invalid.
[   3340.72] X is stopped.
[   3340.73] Power management is disabled, not unloading driver
[   3340.73] Power management is disabled, card already enabled.
[   3340.73] Bumblebee log ended on Tue, 08 Nov 2011 07:42:20 +0100
[     16.24] Bumblebee log started at Tue, 08 Nov 2011 12:35:00 +0100
[     16.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.25] Making FIFO writable for members of group bumblebee
[     16.27] Power management is disabled, not disabling card on start.
[     16.27] Waiting for orders
[  12359.27] Checking for X server availability before stopping it...
[  12359.27] The X server has not started or the pidfile is invalid.
[  12359.28] X is stopped.
[  12359.28] Power management is disabled, not unloading driver
[  12359.29] Power management is disabled, card already enabled.
[  12359.29] Bumblebee log ended on Tue, 08 Nov 2011 16:00:43 +0100
[     16.79] Bumblebee log started at Tue, 08 Nov 2011 19:40:33 +0100
[     16.79] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.80] Making FIFO writable for members of group bumblebee
[     16.80] Power management is disabled, not disabling card on start.
[     16.80] Waiting for orders
[  11915.85] Checking for X server availability before stopping it...
[  11917.04] The X server has not started or the pidfile is invalid.
[  11917.04] X is stopped.
[  11917.05] Power management is disabled, not unloading driver
[  11917.05] Power management is disabled, card already enabled.
[  11917.26] Bumblebee log ended on Tue, 08 Nov 2011 22:58:54 +0100
[     16.97] Bumblebee log started at Wed, 09 Nov 2011 06:47:26 +0100
[     16.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.97] Making FIFO writable for members of group bumblebee
[     16.98] Power management is disabled, not disabling card on start.
[     16.98] Waiting for orders
[   3476.50] Checking for X server availability before stopping it...
[   3476.64] The X server has not started or the pidfile is invalid.
[   3476.64] X is stopped.
[   3476.64] Power management is disabled, not unloading driver
[   3476.65] Power management is disabled, card already enabled.
[   3476.65] Bumblebee log ended on Wed, 09 Nov 2011 07:45:05 +0100
[     16.52] Bumblebee log started at Wed, 09 Nov 2011 11:28:36 +0100
[     16.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.52] Making FIFO writable for members of group bumblebee
[     16.52] Power management is disabled, not disabling card on start.
[     16.53] Waiting for orders
[    609.43] Checking for X server availability before stopping it...
[    609.43] The X server has not started or the pidfile is invalid.
[    609.44] X is stopped.
[    609.44] Power management is disabled, not unloading driver
[    609.45] Power management is disabled, card already enabled.
[    609.45] Bumblebee log ended on Wed, 09 Nov 2011 11:38:29 +0100
[     17.01] Bumblebee log started at Wed, 09 Nov 2011 12:05:02 +0100
[     17.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.01] Making FIFO writable for members of group bumblebee
[     17.02] Power management is disabled, not disabling card on start.
[     17.02] Waiting for orders
[   5833.39] Checking for X server availability before stopping it...
[   5833.40] The X server has not started or the pidfile is invalid.
[   5833.40] X is stopped.
[   5833.40] Power management is disabled, not unloading driver
[   5833.41] Power management is disabled, card already enabled.
[   5833.41] Bumblebee log ended on Wed, 09 Nov 2011 13:41:59 +0100
[     16.32] Bumblebee log started at Wed, 09 Nov 2011 18:29:56 +0100
[     16.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.33] Making FIFO writable for members of group bumblebee
[     16.33] Power management is disabled, not disabling card on start.
[     16.34] Waiting for orders
[  18394.48] Checking for X server availability before stopping it...
[  18395.07] The X server has not started or the pidfile is invalid.
[  18395.26] X is stopped.
[  18395.26] Power management is disabled, not unloading driver
[  18395.26] Power management is disabled, card already enabled.
[  18395.83] Bumblebee log ended on Wed, 09 Nov 2011 23:36:15 +0100
[     21.27] Bumblebee log started at Thu, 10 Nov 2011 06:47:15 +0100
[     21.27] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.35] Making FIFO writable for members of group bumblebee
[     21.35] Power management is disabled, not disabling card on start.
[     21.35] Waiting for orders
[   8910.41] Checking for X server availability before stopping it...
[   8910.51] The X server has not started or the pidfile is invalid.
[   8910.52] X is stopped.
[   8910.52] Power management is disabled, not unloading driver
[   8910.53] Power management is disabled, card already enabled.
[   8910.60] Bumblebee log ended on Thu, 10 Nov 2011 09:15:24 +0100
[     20.75] Bumblebee log started at Thu, 10 Nov 2011 10:57:39 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.77] Power management is disabled, not disabling card on start.
[     20.77] Waiting for orders
[   2812.67] Checking for X server availability before stopping it...
[   2812.68] The X server has not started or the pidfile is invalid.
[   2812.68] X is stopped.
[   2812.68] Power management is disabled, not unloading driver
[   2812.69] Power management is disabled, card already enabled.
[   2812.69] Bumblebee log ended on Thu, 10 Nov 2011 11:44:11 +0100
[     20.73] Bumblebee log started at Thu, 10 Nov 2011 12:24:22 +0100
[     20.74] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.74] Making FIFO writable for members of group bumblebee
[     20.74] Power management is disabled, not disabling card on start.
[     20.75] Waiting for orders
[   4897.10] Checking for X server availability before stopping it...
[   4897.11] The X server has not started or the pidfile is invalid.
[   4897.11] X is stopped.
[   4897.12] Power management is disabled, not unloading driver
[   4897.12] Power management is disabled, card already enabled.
[   4897.12] Bumblebee log ended on Thu, 10 Nov 2011 13:45:38 +0100
[     20.65] Bumblebee log started at Thu, 10 Nov 2011 17:33:19 +0100
[     20.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.65] Making FIFO writable for members of group bumblebee
[     20.66] Power management is disabled, not disabling card on start.
[     20.66] Waiting for orders
[   5043.97] Checking for X server availability before stopping it...
[   5043.98] The X server has not started or the pidfile is invalid.
[   5043.98] X is stopped.
[   5043.99] Power management is disabled, not unloading driver
[   5043.99] Power management is disabled, card already enabled.
[   5044.09] Bumblebee log ended on Thu, 10 Nov 2011 18:57:02 +0100
[     21.16] Bumblebee log started at Thu, 10 Nov 2011 20:08:43 +0100
[     21.17] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.17] Making FIFO writable for members of group bumblebee
[     21.17] Power management is disabled, not disabling card on start.
[     21.18] Waiting for orders
[   8342.80] Checking for X server availability before stopping it...
[   8343.00] The X server has not started or the pidfile is invalid.
[   8343.03] X is stopped.
[   8343.03] Power management is disabled, not unloading driver
[   8343.04] Power management is disabled, card already enabled.
[   8343.04] Bumblebee log ended on Thu, 10 Nov 2011 22:27:25 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 01:52:23 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.89] Making FIFO writable for members of group bumblebee
[     20.89] Power management is disabled, not disabling card on start.
[     20.90] Waiting for orders
[   5698.52] Checking for X server availability before stopping it...
[   5698.53] The X server has not started or the pidfile is invalid.
[   5698.55] X is stopped.
[   5698.55] Power management is disabled, not unloading driver
[   5698.56] Power management is disabled, card already enabled.
[   5698.56] Bumblebee log ended on Fri, 11 Nov 2011 03:27:01 +0100
[     20.89] Bumblebee log started at Fri, 11 Nov 2011 11:24:39 +0100
[     20.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.90] Making FIFO writable for members of group bumblebee
[     20.91] Power management is disabled, not disabling card on start.
[     20.91] Waiting for orders
[  42591.17] Checking for X server availability before stopping it...
[  42592.47] The X server has not started or the pidfile is invalid.
[  42592.49] X is stopped.
[  42592.49] Power management is disabled, not unloading driver
[  42592.49] Power management is disabled, card already enabled.
[  42592.97] Bumblebee log ended on Fri, 11 Nov 2011 23:14:11 +0100
[     21.14] Bumblebee log started at Sat, 12 Nov 2011 08:29:00 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.20] Making FIFO writable for members of group bumblebee
[     21.21] Power management is disabled, not disabling card on start.
[     21.21] Waiting for orders
[  45863.07] Checking for X server availability before stopping it...
[  45863.38] The X server has not started or the pidfile is invalid.
[  45863.47] X is stopped.
[  45863.48] Power management is disabled, not unloading driver
[  45863.48] Power management is disabled, card already enabled.
[  45863.89] Bumblebee log ended on Sat, 12 Nov 2011 21:13:03 +0100
[     20.36] Bumblebee log started at Sun, 13 Nov 2011 10:46:54 +0100
[     20.37] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.37] Making FIFO writable for members of group bumblebee
[     20.37] Power management is disabled, not disabling card on start.
[     20.38] Waiting for orders
[     24.01] Bumblebee log started at Sun, 13 Nov 2011 11:30:49 +0100
[     24.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     24.01] Making FIFO writable for members of group bumblebee
[     24.01] Power management is disabled, not disabling card on start.
[     24.02] Waiting for orders
[  23265.98] Checking for X server availability before stopping it...
[  23266.02] The X server has not started or the pidfile is invalid.
[  23266.03] X is stopped.
[  23266.03] Power management is disabled, not unloading driver
[  23266.03] Power management is disabled, card already enabled.
[  23266.34] Bumblebee log ended on Sun, 13 Nov 2011 17:58:12 +0100
[     20.46] Bumblebee log started at Sun, 13 Nov 2011 19:07:39 +0100
[     20.46] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.46] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   3193.69] Checking for X server availability before stopping it...
[   3193.69] The X server has not started or the pidfile is invalid.
[   3193.70] X is stopped.
[   3193.71] Power management is disabled, not unloading driver
[   3193.72] Power management is disabled, card already enabled.
[   3193.80] Bumblebee log ended on Sun, 13 Nov 2011 20:00:32 +0100
[     20.52] Bumblebee log started at Sun, 13 Nov 2011 20:01:28 +0100
[     20.52] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.53] Making FIFO writable for members of group bumblebee
[     20.53] Power management is disabled, not disabling card on start.
[     20.54] Waiting for orders
[     30.33] Checking for X server availability before stopping it...
[     30.33] The X server has not started or the pidfile is invalid.
[     30.33] X is stopped.
[     30.34] Power management is disabled, not unloading driver
[     30.34] Power management is disabled, card already enabled.
[     30.35] Bumblebee log ended on Sun, 13 Nov 2011 20:01:38 +0100
[     20.54] Bumblebee log started at Sun, 13 Nov 2011 20:37:37 +0100
[     20.54] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.54] Making FIFO writable for members of group bumblebee
[     20.55] Power management is disabled, not disabling card on start.
[     20.55] Waiting for orders
[     20.96] Bumblebee log started at Sun, 13 Nov 2011 20:39:43 +0100
[     20.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.97] Making FIFO writable for members of group bumblebee
[     20.97] Power management is disabled, not disabling card on start.
[     20.97] Waiting for orders
[     22.46] Bumblebee log started at Sun, 13 Nov 2011 23:12:21 +0100
[     22.47] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.47] Making FIFO writable for members of group bumblebee
[     22.47] Power management is disabled, not disabling card on start.
[     22.48] Waiting for orders
[    591.80] Checking for X server availability before stopping it...
[    591.80] The X server has not started or the pidfile is invalid.
[    591.80] X is stopped.
[    592.12] Power management is disabled, not unloading driver
[    592.12] Power management is disabled, card already enabled.
[    592.13] Bumblebee log ended on Sun, 13 Nov 2011 23:21:50 +0100
[     20.16] Bumblebee log started at Mon, 14 Nov 2011 06:47:06 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.17] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   3552.88] Checking for X server availability before stopping it...
[   3553.31] The X server has not started or the pidfile is invalid.
[   3553.32] X is stopped.
[   3553.32] Power management is disabled, not unloading driver
[   3553.32] Power management is disabled, card already enabled.
[   3553.43] Bumblebee log ended on Mon, 14 Nov 2011 07:46:00 +0100
[     22.09] Bumblebee log started at Mon, 14 Nov 2011 12:42:18 +0100
[     22.10] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.10] Making FIFO writable for members of group bumblebee
[     22.10] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[  11942.56] Checking for X server availability before stopping it...
[  11942.56] The X server has not started or the pidfile is invalid.
[  11942.56] X is stopped.
[  11942.57] Power management is disabled, not unloading driver
[  11942.57] Power management is disabled, card already enabled.
[  11942.57] Bumblebee log ended on Mon, 14 Nov 2011 16:00:59 +0100
[     20.58] Bumblebee log started at Mon, 14 Nov 2011 17:56:36 +0100
[     20.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.59] Making FIFO writable for members of group bumblebee
[     20.59] Power management is disabled, not disabling card on start.
[     20.59] Waiting for orders
[  15369.22] Checking for X server availability before stopping it...
[  15369.23] The X server has not started or the pidfile is invalid.
[  15369.23] X is stopped.
[  15369.24] Power management is disabled, not unloading driver
[  15369.25] Power management is disabled, card already enabled.
[  15369.30] Bumblebee log ended on Mon, 14 Nov 2011 22:12:25 +0100
[     21.05] Bumblebee log started at Tue, 15 Nov 2011 06:46:53 +0100
[     21.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.05] Making FIFO writable for members of group bumblebee
[     21.06] Power management is disabled, not disabling card on start.
[     21.06] Waiting for orders
[   3450.03] Checking for X server availability before stopping it...
[   3450.28] The X server has not started or the pidfile is invalid.
[   3450.29] X is stopped.
[   3450.29] Power management is disabled, not unloading driver
[   3450.29] Power management is disabled, card already enabled.
[   3450.31] Bumblebee log ended on Tue, 15 Nov 2011 07:44:03 +0100
[     20.25] Bumblebee log started at Tue, 15 Nov 2011 12:33:05 +0100
[     20.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.26] Making FIFO writable for members of group bumblebee
[     20.26] Power management is disabled, not disabling card on start.
[     20.26] Waiting for orders
[    108.94] Checking for X server availability before stopping it...
[    108.96] The X server has not started or the pidfile is invalid.
[    108.97] X is stopped.
[    108.97] Power management is disabled, not unloading driver
[    108.97] Power management is disabled, card already enabled.
[    108.98] Bumblebee log ended on Tue, 15 Nov 2011 12:34:33 +0100
[     20.48] Bumblebee log started at Tue, 15 Nov 2011 12:35:23 +0100
[     20.49] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.49] Making FIFO writable for members of group bumblebee
[     20.50] Power management is disabled, not disabling card on start.
[     20.50] Waiting for orders
[   4402.43] Checking for X server availability before stopping it...
[   4402.44] The X server has not started or the pidfile is invalid.
[   4402.44] X is stopped.
[   4402.45] Power management is disabled, not unloading driver
[   4402.46] Power management is disabled, card already enabled.
[   4402.63] Bumblebee log ended on Tue, 15 Nov 2011 13:48:25 +0100
[     43.95] Bumblebee log started at Tue, 15 Nov 2011 14:46:28 +0100
[     43.96] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.96] Making FIFO writable for members of group bumblebee
[     43.96] Power management is disabled, not disabling card on start.
[     43.97] Waiting for orders
[  19830.85] Checking for X server availability before stopping it...
[  19831.14] The X server has not started or the pidfile is invalid.
[  19831.21] X is stopped.
[  19831.22] Power management is disabled, not unloading driver
[  19831.23] Power management is disabled, card already enabled.
[  19831.28] Bumblebee log ended on Tue, 15 Nov 2011 20:16:16 +0100
[     20.95] Bumblebee log started at Tue, 15 Nov 2011 20:17:08 +0100
[     20.95] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.95] Making FIFO writable for members of group bumblebee
[     20.96] Power management is disabled, not disabling card on start.
[     20.96] Waiting for orders
[   2290.72] Checking for X server availability before stopping it...
[   2290.72] The X server has not started or the pidfile is invalid.
[   2290.73] X is stopped.
[   2290.73] Power management is disabled, not unloading driver
[   2290.73] Power management is disabled, card already enabled.
[   2290.74] Bumblebee log ended on Tue, 15 Nov 2011 20:54:58 +0100
[     20.14] Bumblebee log started at Wed, 16 Nov 2011 01:16:44 +0100
[     20.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.15] Making FIFO writable for members of group bumblebee
[     20.15] Power management is disabled, not disabling card on start.
[     20.15] Waiting for orders
[    523.29] Checking for X server availability before stopping it...
[    523.30] The X server has not started or the pidfile is invalid.
[    523.30] X is stopped.
[    523.30] Power management is disabled, not unloading driver
[    523.31] Power management is disabled, card already enabled.
[    523.31] Bumblebee log ended on Wed, 16 Nov 2011 01:25:08 +0100
[     19.77] Bumblebee log started at Wed, 16 Nov 2011 06:46:47 +0100
[     19.78] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.78] Making FIFO writable for members of group bumblebee
[     19.78] Power management is disabled, not disabling card on start.
[     19.79] Waiting for orders
[   3232.13] Checking for X server availability before stopping it...
[   3232.13] The X server has not started or the pidfile is invalid.
[   3232.13] X is stopped.
[   3232.14] Power management is disabled, not unloading driver
[   3232.14] Power management is disabled, card already enabled.
[   3232.14] Bumblebee log ended on Wed, 16 Nov 2011 07:40:19 +0100
[     20.29] Bumblebee log started at Wed, 16 Nov 2011 12:46:46 +0100
[     20.29] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.29] Making FIFO writable for members of group bumblebee
[     20.30] Power management is disabled, not disabling card on start.
[     20.30] Waiting for orders
[   3384.20] Checking for X server availability before stopping it...
[   3384.27] The X server has not started or the pidfile is invalid.
[   3384.28] X is stopped.
[   3384.28] Power management is disabled, not unloading driver
[   3384.29] Power management is disabled, card already enabled.
[   3384.36] Bumblebee log ended on Wed, 16 Nov 2011 13:42:50 +0100
[     20.75] Bumblebee log started at Wed, 16 Nov 2011 17:24:38 +0100
[     20.75] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.76] Making FIFO writable for members of group bumblebee
[     20.76] Power management is disabled, not disabling card on start.
[     20.76] Waiting for orders
[  13407.70] Checking for X server availability before stopping it...
[  13407.73] The X server has not started or the pidfile is invalid.
[  13407.73] X is stopped.
[  13407.74] Power management is disabled, not unloading driver
[  13407.75] Power management is disabled, card already enabled.
[  13407.79] Bumblebee log ended on Wed, 16 Nov 2011 21:07:45 +0100
[     20.16] Bumblebee log started at Wed, 16 Nov 2011 23:27:45 +0100
[     20.16] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.16] Making FIFO writable for members of group bumblebee
[     20.16] Power management is disabled, not disabling card on start.
[     20.17] Waiting for orders
[   1742.36] Checking for X server availability before stopping it...
[   1742.37] The X server has not started or the pidfile is invalid.
[   1743.42] X is stopped.
[   1743.42] Power management is disabled, not unloading driver
[   1743.43] Power management is disabled, card already enabled.
[   1743.64] Bumblebee log ended on Wed, 16 Nov 2011 23:56:29 +0100
[     20.67] Bumblebee log started at Thu, 17 Nov 2011 06:46:35 +0100
[     20.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.67] Making FIFO writable for members of group bumblebee
[     20.68] Power management is disabled, not disabling card on start.
[     20.68] Waiting for orders
[   3526.34] Checking for X server availability before stopping it...
[   3526.38] The X server has not started or the pidfile is invalid.
[   3526.39] X is stopped.
[   3526.39] Power management is disabled, not unloading driver
[   3526.39] Power management is disabled, card already enabled.
[   3527.34] Bumblebee log ended on Thu, 17 Nov 2011 07:45:02 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 12:54:41 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.22] Making FIFO writable for members of group bumblebee
[     19.22] Power management is disabled, not disabling card on start.
[     19.22] Waiting for orders
[   2968.99] Checking for X server availability before stopping it...
[   2968.99] The X server has not started or the pidfile is invalid.
[   2969.00] X is stopped.
[   2969.00] Power management is disabled, not unloading driver
[   2969.01] Power management is disabled, card already enabled.
[   2969.10] Bumblebee log ended on Thu, 17 Nov 2011 13:43:51 +0100
[     19.07] Bumblebee log started at Thu, 17 Nov 2011 17:29:29 +0100
[     19.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.08] Making FIFO writable for members of group bumblebee
[     19.08] Power management is disabled, not disabling card on start.
[     19.08] Waiting for orders
[     21.14] Bumblebee log started at Fri, 18 Nov 2011 06:46:47 +0100
[     21.14] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.16] Making FIFO writable for members of group bumblebee
[     21.16] Power management is disabled, not disabling card on start.
[     21.16] Waiting for orders
[   3495.04] Checking for X server availability before stopping it...
[   3495.04] The X server has not started or the pidfile is invalid.
[   3495.08] X is stopped.
[   3495.08] Power management is disabled, not unloading driver
[   3495.08] Power management is disabled, card already enabled.
[   3495.09] Bumblebee log ended on Fri, 18 Nov 2011 07:44:41 +0100
[     18.83] Bumblebee log started at Fri, 18 Nov 2011 12:45:03 +0100
[     18.85] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.85] Making FIFO writable for members of group bumblebee
[     18.86] Power management is disabled, not disabling card on start.
[     18.86] Waiting for orders
[   1814.24] Checking for X server availability before stopping it...
[   1814.25] The X server has not started or the pidfile is invalid.
[   1814.25] X is stopped.
[   1814.26] Power management is disabled, not unloading driver
[   1814.26] Power management is disabled, card already enabled.
[   1814.47] Bumblebee log ended on Fri, 18 Nov 2011 13:14:59 +0100
[     19.12] Bumblebee log started at Fri, 18 Nov 2011 16:12:42 +0100
[     19.13] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.13] Making FIFO writable for members of group bumblebee
[     19.14] Power management is disabled, not disabling card on start.
[     19.14] Waiting for orders
[  24725.05] Checking for X server availability before stopping it...
[  24726.37] The X server has not started or the pidfile is invalid.
[  24726.38] X is stopped.
[  24726.50] Power management is disabled, not unloading driver
[  24726.51] Power management is disabled, card already enabled.
[  24726.54] Bumblebee log ended on Fri, 18 Nov 2011 23:04:30 +0100
[     19.57] Bumblebee log started at Sat, 19 Nov 2011 08:38:16 +0100
[     19.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.57] Making FIFO writable for members of group bumblebee
[     19.58] Power management is disabled, not disabling card on start.
[     19.58] Waiting for orders
[     21.77] Bumblebee log started at Sat, 19 Nov 2011 17:13:09 +0100
[     21.77] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.78] Making FIFO writable for members of group bumblebee
[     21.78] Power management is disabled, not disabling card on start.
[     21.78] Waiting for orders
[  16485.45] Checking for X server availability before stopping it...
[  16485.52] The X server has not started or the pidfile is invalid.
[  16485.52] X is stopped.
[  16485.52] Power management is disabled, not unloading driver
[  16485.53] Power management is disabled, card already enabled.
[  16485.76] Bumblebee log ended on Sat, 19 Nov 2011 21:47:33 +0100
[     18.92] Bumblebee log started at Sun, 20 Nov 2011 08:51:59 +0100
[     18.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.93] Making FIFO writable for members of group bumblebee
[     18.93] Power management is disabled, not disabling card on start.
[     18.94] Waiting for orders
[     23.57] Bumblebee log started at Sun, 20 Nov 2011 20:59:30 +0100
[     23.58] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.58] Making FIFO writable for members of group bumblebee
[     23.58] Power management is disabled, not disabling card on start.
[     23.58] Waiting for orders
[     21.67] Bumblebee log started at Sun, 20 Nov 2011 21:48:34 +0100
[     21.67] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.68] Making FIFO writable for members of group bumblebee
[     21.68] Power management is disabled, not disabling card on start.
[     21.68] Waiting for orders
[   3189.55] Checking for X server availability before stopping it...
[   3189.56] The X server has not started or the pidfile is invalid.
[   3189.57] X is stopped.
[   3189.58] Power management is disabled, not unloading driver
[   3189.58] Power management is disabled, card already enabled.
[   3189.61] Bumblebee log ended on Sun, 20 Nov 2011 22:41:22 +0100
[     19.89] Bumblebee log started at Sun, 20 Nov 2011 22:49:29 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[    463.22] Checking for X server availability before stopping it...
[    463.23] The X server has not started or the pidfile is invalid.
[    463.23] X is stopped.
[    463.24] Power management is disabled, not unloading driver
[    463.24] Power management is disabled, card already enabled.
[    463.25] Bumblebee log ended on Sun, 20 Nov 2011 22:56:52 +0100
[     19.92] Bumblebee log started at Mon, 21 Nov 2011 06:46:41 +0100
[     19.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.93] Making FIFO writable for members of group bumblebee
[     19.93] Power management is disabled, not disabling card on start.
[     19.93] Waiting for orders
[     20.40] Bumblebee log started at Mon, 21 Nov 2011 12:27:26 +0100
[     20.41] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.47] Making FIFO writable for members of group bumblebee
[     20.47] Power management is disabled, not disabling card on start.
[     20.47] Waiting for orders
[   2837.24] Checking for X server availability before stopping it...
[   2837.25] The X server has not started or the pidfile is invalid.
[   2837.25] X is stopped.
[   2837.25] Power management is disabled, not unloading driver
[   2837.26] Power management is disabled, card already enabled.
[   2837.27] Bumblebee log ended on Mon, 21 Nov 2011 13:14:23 +0100
[     20.04] Bumblebee log started at Mon, 21 Nov 2011 17:54:00 +0100
[     20.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.04] Making FIFO writable for members of group bumblebee
[     20.05] Power management is disabled, not disabling card on start.
[     20.05] Waiting for orders
[   5298.95] Checking for X server availability before stopping it...
[   5299.08] The X server has not started or the pidfile is invalid.
[   5299.09] X is stopped.
[   5299.09] Power management is disabled, not unloading driver
[   5299.10] Power management is disabled, card already enabled.
[   5299.10] Bumblebee log ended on Mon, 21 Nov 2011 19:21:59 +0100
[     19.14] Bumblebee log started at Mon, 21 Nov 2011 21:43:17 +0100
[     19.15] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.15] Making FIFO writable for members of group bumblebee
[     19.15] Power management is disabled, not disabling card on start.
[     19.16] Waiting for orders
[   5920.55] Checking for X server availability before stopping it...
[   5920.55] The X server has not started or the pidfile is invalid.
[   5920.55] X is stopped.
[   5920.56] Power management is disabled, not unloading driver
[   5920.56] Power management is disabled, card already enabled.
[   5920.56] Bumblebee log ended on Mon, 21 Nov 2011 23:21:39 +0100
[     19.38] Bumblebee log started at Tue, 22 Nov 2011 06:46:40 +0100
[     19.39] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.39] Making FIFO writable for members of group bumblebee
[     19.39] Power management is disabled, not disabling card on start.
[     19.40] Waiting for orders
[   3549.94] Checking for X server availability before stopping it...
[   3549.94] The X server has not started or the pidfile is invalid.
[   3549.95] X is stopped.
[   3549.96] Power management is disabled, not unloading driver
[   3549.96] Power management is disabled, card already enabled.
[   3549.97] Bumblebee log ended on Tue, 22 Nov 2011 07:45:30 +0100
[     19.59] Bumblebee log started at Tue, 22 Nov 2011 12:46:40 +0100
[     19.59] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.60] Making FIFO writable for members of group bumblebee
[     19.60] Power management is disabled, not disabling card on start.
[     19.60] Waiting for orders
[   1400.37] Checking for X server availability before stopping it...
[   1400.38] The X server has not started or the pidfile is invalid.
[   1400.38] X is stopped.
[   1400.38] Power management is disabled, not unloading driver
[   1400.39] Power management is disabled, card already enabled.
[   1400.40] Bumblebee log ended on Tue, 22 Nov 2011 13:09:41 +0100
[     19.64] Bumblebee log started at Tue, 22 Nov 2011 16:02:09 +0100
[     19.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.65] Making FIFO writable for members of group bumblebee
[     19.65] Power management is disabled, not disabling card on start.
[     19.65] Waiting for orders
[     94.77] Checking for X server availability before stopping it...
[     94.77] The X server has not started or the pidfile is invalid.
[     94.78] X is stopped.
[     94.78] Power management is disabled, not unloading driver
[     94.78] Power management is disabled, card already enabled.
[     94.78] Bumblebee log ended on Tue, 22 Nov 2011 16:03:24 +0100
[     18.85] Bumblebee log started at Tue, 22 Nov 2011 18:44:32 +0100
[     18.86] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.87] Making FIFO writable for members of group bumblebee
[     18.87] Power management is disabled, not disabling card on start.
[     18.88] Waiting for orders
[     22.72] Bumblebee log started at Wed, 23 Nov 2011 06:47:17 +0100
[     22.72] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.73] Making FIFO writable for members of group bumblebee
[     22.73] Power management is disabled, not disabling card on start.
[     22.73] Waiting for orders
[   3447.68] Checking for X server availability before stopping it...
[   3447.79] The X server has not started or the pidfile is invalid.
[   3447.80] X is stopped.
[   3447.80] Power management is disabled, not unloading driver
[   3447.80] Power management is disabled, card already enabled.
[   3447.81] Bumblebee log ended on Wed, 23 Nov 2011 07:44:22 +0100
[     21.92] Bumblebee log started at Wed, 23 Nov 2011 12:52:01 +0100
[     21.92] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.08] Making FIFO writable for members of group bumblebee
[     22.08] Power management is disabled, not disabling card on start.
[     22.08] Waiting for orders
[   3220.90] Checking for X server availability before stopping it...
[   3220.90] The X server has not started or the pidfile is invalid.
[   3220.90] X is stopped.
[   3220.90] Power management is disabled, not unloading driver
[   3220.91] Power management is disabled, card already enabled.
[   3220.99] Bumblebee log ended on Wed, 23 Nov 2011 13:45:20 +0100
[     17.38] Bumblebee log started at Wed, 23 Nov 2011 16:13:44 +0100
[     17.38] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.39] Making FIFO writable for members of group bumblebee
[     17.39] Power management is disabled, not disabling card on start.
[     17.39] Waiting for orders
[   8018.44] Checking for X server availability before stopping it...
[   8018.45] The X server has not started or the pidfile is invalid.
[   8018.45] X is stopped.
[   8018.47] Power management is disabled, not unloading driver
[   8018.48] Power management is disabled, card already enabled.
[   8018.65] Bumblebee log ended on Wed, 23 Nov 2011 18:27:05 +0100
[     17.65] Bumblebee log started at Wed, 23 Nov 2011 18:41:43 +0100
[     17.65] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.65] Making FIFO writable for members of group bumblebee
[     17.66] Power management is disabled, not disabling card on start.
[     17.66] Waiting for orders
[     67.47] Checking for X server availability before stopping it...
[     67.61] The X server has not started or the pidfile is invalid.
[     67.61] X is stopped.
[     67.61] Power management is disabled, not unloading driver
[     67.61] Power management is disabled, card already enabled.
[     67.62] Bumblebee log ended on Wed, 23 Nov 2011 18:42:33 +0100
[     17.63] Bumblebee log started at Wed, 23 Nov 2011 21:23:59 +0100
[     17.64] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.64] Making FIFO writable for members of group bumblebee
[     17.64] Power management is disabled, not disabling card on start.
[     17.65] Waiting for orders
[   4045.12] Checking for X server availability before stopping it...
[   4045.13] The X server has not started or the pidfile is invalid.
[   4045.13] X is stopped.
[   4045.14] Power management is disabled, not unloading driver
[   4045.14] Power management is disabled, card already enabled.
[   4045.31] Bumblebee log ended on Wed, 23 Nov 2011 22:31:07 +0100
[     17.33] Bumblebee log started at Thu, 24 Nov 2011 06:47:11 +0100
[     17.33] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.33] Making FIFO writable for members of group bumblebee
[     17.34] Power management is disabled, not disabling card on start.
[     17.34] Waiting for orders
[     43.01] Bumblebee log started at Thu, 24 Nov 2011 07:07:24 +0100
[     43.01] Creating fifo /var/run/bumblebee.fifo for communication...
[     43.02] Making FIFO writable for members of group bumblebee
[     43.02] Power management is disabled, not disabling card on start.
[     43.02] Waiting for orders
[   1987.64] Checking for X server availability before stopping it...
[   1987.65] The X server has not started or the pidfile is invalid.
[   1987.66] X is stopped.
[   1987.67] Power management is disabled, not unloading driver
[   1987.74] Power management is disabled, card already enabled.
[   1987.75] Bumblebee log ended on Thu, 24 Nov 2011 07:39:49 +0100
[     17.22] Bumblebee log started at Thu, 24 Nov 2011 12:55:22 +0100
[     17.22] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.24] Making FIFO writable for members of group bumblebee
[     17.26] Power management is disabled, not disabling card on start.
[     17.26] Waiting for orders
[   2576.05] Checking for X server availability before stopping it...
[   2576.17] The X server has not started or the pidfile is invalid.
[   2576.17] X is stopped.
[   2576.17] Power management is disabled, not unloading driver
[   2576.18] Power management is disabled, card already enabled.
[   2576.51] Bumblebee log ended on Thu, 24 Nov 2011 13:38:02 +0100
[     18.04] Bumblebee log started at Thu, 24 Nov 2011 13:38:51 +0100
[     18.05] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.05] Making FIFO writable for members of group bumblebee
[     18.05] Power management is disabled, not disabling card on start.
[     18.05] Waiting for orders
[     79.64] Checking for X server availability before stopping it...
[     79.76] The X server has not started or the pidfile is invalid.
[     79.76] X is stopped.
[     79.76] Power management is disabled, not unloading driver
[     79.76] Power management is disabled, card already enabled.
[     79.77] Bumblebee log ended on Thu, 24 Nov 2011 13:39:53 +0100
[     17.94] Bumblebee log started at Thu, 24 Nov 2011 16:33:47 +0100
[     17.94] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.95] Making FIFO writable for members of group bumblebee
[     17.95] Power management is disabled, not disabling card on start.
[     17.96] Waiting for orders
[   7532.10] Checking for X server availability before stopping it...
[   7532.11] The X server has not started or the pidfile is invalid.
[   7532.42] X is stopped.
[   7532.42] Power management is disabled, not unloading driver
[   7532.43] Power management is disabled, card already enabled.
[   7532.44] Bumblebee log ended on Thu, 24 Nov 2011 18:39:01 +0100
[     17.55] Bumblebee log started at Thu, 24 Nov 2011 20:13:32 +0100
[     17.55] Creating fifo /var/run/bumblebee.fifo for communication...
[     17.56] Making FIFO writable for members of group bumblebee
[     17.56] Power management is disabled, not disabling card on start.
[     17.56] Waiting for orders
[   7395.13] Checking for X server availability before stopping it...
[   7395.13] The X server has not started or the pidfile is invalid.
[   7395.14] X is stopped.
[   7395.14] Power management is disabled, not unloading driver
[   7395.14] Power management is disabled, card already enabled.
[   7395.15] Bumblebee log ended on Thu, 24 Nov 2011 22:16:29 +0100
[     16.98] Bumblebee log started at Fri, 25 Nov 2011 12:48:04 +0100
[     16.99] Creating fifo /var/run/bumblebee.fifo for communication...
[     16.99] Making FIFO writable for members of group bumblebee
[     17.00] Power management is disabled, not disabling card on start.
[     17.00] Waiting for orders
[    255.82] Checking for X server availability before stopping it...
[    255.82] The X server has not started or the pidfile is invalid.
[    255.83] X is stopped.
[    255.83] Power management is disabled, not unloading driver
[    255.84] Power management is disabled, card already enabled.
[    255.89] Bumblebee log ended on Fri, 25 Nov 2011 12:52:03 +0100
[     19.01] Bumblebee log started at Fri, 25 Nov 2011 18:43:36 +0100
[     19.02] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.02] Making FIFO writable for members of group bumblebee
[     19.02] Power management is disabled, not disabling card on start.
[     19.02] Waiting for orders
[   8521.09] Checking for X server availability before stopping it...
[   8521.28] The X server has not started or the pidfile is invalid.
[   8521.29] X is stopped.
[   8521.29] Power management is disabled, not unloading driver
[   8521.30] Power management is disabled, card already enabled.
[   8521.30] Bumblebee log ended on Fri, 25 Nov 2011 21:05:21 +0100
[     18.21] Bumblebee log started at Sat, 26 Nov 2011 08:35:40 +0100
[     18.21] Creating fifo /var/run/bumblebee.fifo for communication...
[     18.22] Making FIFO writable for members of group bumblebee
[     18.22] Power management is disabled, not disabling card on start.
[     18.22] Waiting for orders
[     19.89] Bumblebee log started at Sat, 26 Nov 2011 10:03:16 +0100
[     19.89] Creating fifo /var/run/bumblebee.fifo for communication...
[     19.89] Making FIFO writable for members of group bumblebee
[     19.90] Power management is disabled, not disabling card on start.
[     19.90] Waiting for orders
[   4213.05] Checking for X server availability before stopping it...
[   4213.06] The X server has not started or the pidfile is invalid.
[   4213.06] X is stopped.
[   4213.06] Power management is disabled, not unloading driver
[   4213.07] Power management is disabled, card already enabled.
[   4213.08] Bumblebee log ended on Sat, 26 Nov 2011 11:13:09 +0100
[   4403.15] Bumblebee log started at Sat, 26 Nov 2011 11:16:19 +0100
[   4403.16] Creating fifo /var/run/bumblebee.fifo for communication...
[   4403.23] Making FIFO writable for members of group bumblebee
[   4403.29] Power management is disabled, not disabling card on start.
[   4403.29] Waiting for orders
[   4425.63] Checking for X server availability before stopping it...
[   4427.02] The X server has not started or the pidfile is invalid.
[   4427.44] X is stopped.
[   4427.45] Power management is disabled, not unloading driver
[   4427.45] Power management is disabled, card already enabled.
[   4427.46] Bumblebee log ended on Sat, 26 Nov 2011 11:16:44 +0100
[     21.97] Bumblebee log started at Sat, 26 Nov 2011 11:17:34 +0100
[     21.98] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.11] Making FIFO writable for members of group bumblebee
[     22.11] Power management is disabled, not disabling card on start.
[     22.11] Waiting for orders
[   1464.60] Checking for X server availability before stopping it...
[   1464.60] The X server has not started or the pidfile is invalid.
[   1464.60] X is stopped.
[   1464.61] Power management is disabled, not unloading driver
[   1464.61] Power management is disabled, card already enabled.
[   1464.62] Bumblebee log ended on Sat, 26 Nov 2011 11:41:37 +0100
[     22.08] Bumblebee log started at Sat, 26 Nov 2011 11:42:25 +0100
[     22.08] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.09] Making FIFO writable for members of group bumblebee
[     22.45] Unloading driver 'nouveau' on start...
[     22.73] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.73]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.73] The driver could not be unloaded on start.
[     22.73] Waiting for orders
[     20.76] Bumblebee log started at Sat, 26 Nov 2011 11:43:38 +0100
[     20.76] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.77] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     21.64] FATAL: Module nouveau is in use.
[     21.79] The driver could not be unloaded on start.
[     21.80] Waiting for orders
[     45.81] Checking for X server availability before stopping it...
[     45.95] The X server has not started or the pidfile is invalid.
[     45.95] X is stopped.
[     45.95] Unloading driver...
[     46.19] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     46.19]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     46.30] The driver could not be unloaded.
[     46.30] Perhaps another program is using it.
[     46.30] Enabling graphics card before stopping daemon...
[     21.03] Bumblebee log started at Sat, 26 Nov 2011 11:45:09 +0100
[     21.04] Creating fifo /var/run/bumblebee.fifo for communication...
[     21.04] Making FIFO writable for members of group bumblebee
[     21.12] Unloading driver 'nouveau' on start...
[     22.81] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.81]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.81] The driver could not be unloaded on start.
[     22.81] Waiting for orders
[     20.71] Bumblebee log started at Sat, 26 Nov 2011 11:46:48 +0100
[     20.71] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.72] Making FIFO writable for members of group bumblebee
[     20.93] Unloading driver 'nouveau' on start...
[     22.47] rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/gpu/drm/ttm/ttm.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/mxm-wmi.ko
[     22.47]   rmmod /lib/modules/3.0.0-13-generic/kernel/drivers/platform/x86/wmi.ko
[     22.47] The driver could not be unloaded on start.
[     22.48] Waiting for orders
[     20.57] Bumblebee log started at Sat, 26 Nov 2011 11:48:17 +0100
[     20.57] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.58] Making FIFO writable for members of group bumblebee
[     20.72] Unloading driver 'nouveau' on start...
[     22.54] FATAL: Module nouveau is in use.
[     22.54] The driver could not be unloaded on start.
[     22.54] Waiting for orders
[    150.11] Optirun start request received.
[    150.12] Checking for X server availability before starting X...
[    150.12] X server is not started
[    150.13] Enabling graphics card...
[    150.21] 
[    150.21] Loading driver...
[     20.97] Bumblebee log started at Sat, 26 Nov 2011 11:51:47 +0100
[     20.97] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.98] Making FIFO writable for members of group bumblebee
[     20.98] Power management is disabled, not disabling card on start.
[     20.98] Waiting for orders
[     23.80] Bumblebee log started at Sat, 26 Nov 2011 16:13:22 +0100
[     23.80] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.80] Making FIFO writable for members of group bumblebee
[     23.81] Power management is disabled, not disabling card on start.
[     23.81] Waiting for orders
[     23.00] Bumblebee log started at Sat, 26 Nov 2011 19:31:52 +0100
[     23.00] Creating fifo /var/run/bumblebee.fifo for communication...
[     23.01] Making FIFO writable for members of group bumblebee
[     23.01] Power management is disabled, not disabling card on start.
[     23.01] Waiting for orders
[   5427.84] Checking for X server availability before stopping it...
[   5427.85] The X server has not started or the pidfile is invalid.
[   5427.85] X is stopped.
[   5427.85] Power management is disabled, not unloading driver
[   5427.86] Power management is disabled, card already enabled.
[   5427.86] Bumblebee log ended on Sat, 26 Nov 2011 21:01:58 +0100
[     20.17] Bumblebee log started at Sun, 27 Nov 2011 08:37:11 +0100
[     20.18] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.18] Making FIFO writable for members of group bumblebee
[     20.18] Power management is disabled, not disabling card on start.
[     20.19] Waiting for orders
[    514.01] Optirun start request received.
[    514.01] Checking for X server availability before starting X...
[    514.02] X server is not started
[    514.02] Power management is disabled, only loading driver
[     22.43] Bumblebee log started at Sun, 27 Nov 2011 08:55:09 +0100
[     22.44] Creating fifo /var/run/bumblebee.fifo for communication...
[     22.44] Making FIFO writable for members of group bumblebee
[     22.44] Power management is disabled, not disabling card on start.
[     22.45] Waiting for orders
[     20.91] Bumblebee log started at Sun, 27 Nov 2011 09:26:57 +0100
[     20.91] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.91] Making FIFO writable for members of group bumblebee
[     20.91] Power management is disabled, not disabling card on start.
[     20.92] Waiting for orders
[  21852.23] Checking for X server availability before stopping it...
[  21852.65] The X server has not started or the pidfile is invalid.
[  21852.65] X is stopped.
[  21852.66] Power management is disabled, not unloading driver
[  21852.66] Power management is disabled, card already enabled.
[  21852.74] Bumblebee log ended on Sun, 27 Nov 2011 15:30:48 +0100
[     20.28] Bumblebee log started at Sun, 27 Nov 2011 23:43:48 +0100
[     20.29] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.29] Making FIFO writable for members of group bumblebee
[     20.29] Power management is disabled, not disabling card on start.
[     20.29] Waiting for orders
[    621.17] Checking for X server availability before stopping it...
[    621.18] The X server has not started or the pidfile is invalid.
[    621.18] X is stopped.
[    621.18] Power management is disabled, not unloading driver
[    621.19] Power management is disabled, card already enabled.
[    621.19] Bumblebee log ended on Sun, 27 Nov 2011 23:53:48 +0100
[     20.02] Bumblebee log started at Sun, 27 Nov 2011 23:54:34 +0100
[     20.02] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.02] Making FIFO writable for members of group bumblebee
[     20.02] Power management is disabled, not disabling card on start.
[     20.03] Waiting for orders
[     36.30] Optirun start request received.
[     36.30] Checking for X server availability before starting X...
[     36.30] X server is not started
[     36.30] Power management is disabled, only loading driver
[     36.55] insmod /lib/modules/3.0.0-13-generic/updates/dkms/nvidia_current.ko 
[     36.55] Starting X using nvidia...
[     36.55] Waiting for X server to become available...
[     47.07] The Bumblebee X server failed to start. Please check /var/log/Xorg.8.log
[     47.08] Waiting for orders
[     53.47] Optirun start request received.
[     53.47] Checking for X server availability before starting X...
[     53.48] X server is not started
[     53.48] Power management is disabled, only loading driver
[     53.71] insmod /lib/modules/3.0.0-13-generic/updates/dkms/nvidia_current.ko 
[     53.71] Starting X using nvidia...
[     53.71] Waiting for X server to become available...
[     63.76] The Bumblebee X server failed to start. Please check /var/log/Xorg.8.log
[     63.76] Waiting for orders
[     76.18] Checking for X server availability before stopping it...
[     76.18] The X server has not started or the pidfile is invalid.
[     76.19] X is stopped.
[     76.19] Power management is disabled, not unloading driver
[     76.19] Power management is disabled, card already enabled.
[     76.20] Bumblebee log ended on Sun, 27 Nov 2011 23:55:30 +0100
[     20.77] Bumblebee log started at Mon, 28 Nov 2011 06:52:25 +0100
[     20.77] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.78] Making FIFO writable for members of group bumblebee
[     20.78] Power management is disabled, not disabling card on start.
[     20.78] Waiting for orders
[    673.66] Optirun start request received.
[    673.66] Checking for X server availability before starting X...
[    673.67] X server is not started
[    673.67] Power management is disabled, only loading driver
[    673.93] insmod /lib/modules/3.0.0-13-generic/updates/dkms/nvidia_current.ko 
[    673.93] Starting X using nvidia...
[    673.93] Waiting for X server to become available...
[    684.41] The Bumblebee X server failed to start. Please check /var/log/Xorg.8.log
[    684.41] Waiting for orders

Dernière modification par Sp0tnik (Le 28/11/2011, à 07:24)

Qid · Le 28/11/2011, à 08:07

Qid a écrit :

ArchangeGabriel a écrit :
@Qid : Xorg.0.log.old s'il te plaît.
ah oui !? le old au grand complet !? ... bah écoute au prochain clash je te le donnerais :
actuellement Xorg ne plante plus suite à une petite mise a jour donc ça va

et un petit crash ce matin alors que j'ai pas le temps de m'amuser avec ça ... voici donc le log demandé :

[    11.275] 
X.Org X Server 1.11.2
Release Date: 2011-11-04
[    11.275] X Protocol Version 11, Revision 0
[    11.275] Build Operating System: Linux 2.6.24-30-xen i686 Ubuntu
[    11.275] Current Operating System: Linux Qid-UbuntuDesktop 3.0.0-13-generic-pae #22-Ubuntu SMP Wed Nov 2 15:17:35 UTC 2011 i686
[    11.275] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic-pae root=UUID=ec6e13d2-e6b0-4bf5-9499-8eb79e4462a3 ro quiet splash vt.handoff=7
[    11.275] Build Date: 25 November 2011  11:41:50AM
[    11.275] xorg-server 2:1.11.2+git20111125+server-1.11-branch.e2661ddb-0ubuntu0ricotz~oneiric (For technical support please see http://www.ubuntu.com/support) 
[    11.275] Current version of pixman: 0.24.0
[    11.275]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    11.275] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.275] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 28 07:47:43 2011
[    11.301] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.301] (==) No Layout section.  Using the first Screen section.
[    11.301] (==) No screen section available. Using defaults.
[    11.301] (**) |-->Screen "Default Screen Section" (0)
[    11.301] (**) |   |-->Monitor "<default monitor>"
[    11.302] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    11.302] (==) Automatically adding devices
[    11.302] (==) Automatically enabling devices
[    11.302] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    11.302]     Entry deleted from font path.
[    11.302] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    11.302]     Entry deleted from font path.
[    11.302] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    11.302]     Entry deleted from font path.
[    11.302] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    11.302]     Entry deleted from font path.
[    11.302] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    11.302]     Entry deleted from font path.
[    11.302] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    11.302] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    11.302] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.302] (II) Loader magic: 0x822a580
[    11.302] (II) Module ABI versions:
[    11.302]     X.Org ANSI C Emulation: 0.4
[    11.302]     X.Org Video Driver: 11.0
[    11.302]     X.Org XInput driver : 13.0
[    11.302]     X.Org Server Extension : 6.0
[    11.303] (--) PCI:*(0:0:2:0) 8086:0116:1043:105c rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    11.303] (--) PCI: (0:1:0:0) 10de:0df4:1043:105c rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    11.303] (II) Open ACPI successful (/var/run/acpid.socket)
[    11.303] (II) LoadModule: "extmod"
[    11.337] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    11.337] (II) Module extmod: vendor="X.Org Foundation"
[    11.337]     compiled for 1.11.2, module version = 1.0.0
[    11.337]     Module class: X.Org Server Extension
[    11.337]     ABI class: X.Org Server Extension, version 6.0
[    11.337] (II) Loading extension MIT-SCREEN-SAVER
[    11.337] (II) Loading extension XFree86-VidModeExtension
[    11.337] (II) Loading extension XFree86-DGA
[    11.337] (II) Loading extension DPMS
[    11.337] (II) Loading extension XVideo
[    11.337] (II) Loading extension XVideo-MotionCompensation
[    11.337] (II) Loading extension X-Resource
[    11.337] (II) LoadModule: "dbe"
[    11.338] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    11.338] (II) Module dbe: vendor="X.Org Foundation"
[    11.338]     compiled for 1.11.2, module version = 1.0.0
[    11.338]     Module class: X.Org Server Extension
[    11.338]     ABI class: X.Org Server Extension, version 6.0
[    11.338] (II) Loading extension DOUBLE-BUFFER
[    11.338] (II) LoadModule: "glx"
[    11.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.338] (II) Module glx: vendor="X.Org Foundation"
[    11.338]     compiled for 1.11.2, module version = 1.0.0
[    11.338]     ABI class: X.Org Server Extension, version 6.0
[    11.338] (==) AIGLX enabled
[    11.338] (II) Loading extension GLX
[    11.338] (II) LoadModule: "record"
[    11.339] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    11.339] (II) Module record: vendor="X.Org Foundation"
[    11.339]     compiled for 1.11.2, module version = 1.13.0
[    11.339]     Module class: X.Org Server Extension
[    11.339]     ABI class: X.Org Server Extension, version 6.0
[    11.339] (II) Loading extension RECORD
[    11.339] (II) LoadModule: "dri"
[    11.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    11.340] (II) Module dri: vendor="X.Org Foundation"
[    11.340]     compiled for 1.11.2, module version = 1.0.0
[    11.340]     ABI class: X.Org Server Extension, version 6.0
[    11.340] (II) Loading extension XFree86-DRI
[    11.340] (II) LoadModule: "dri2"
[    11.340] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    11.340] (II) Module dri2: vendor="X.Org Foundation"
[    11.340]     compiled for 1.11.2, module version = 1.2.0
[    11.340]     ABI class: X.Org Server Extension, version 6.0
[    11.340] (II) Loading extension DRI2
[    11.340] (==) Matched intel as autoconfigured driver 0
[    11.340] (==) Matched vesa as autoconfigured driver 1
[    11.340] (==) Matched fbdev as autoconfigured driver 2
[    11.340] (==) Assigned the driver to the xf86ConfigLayout
[    11.340] (II) LoadModule: "intel"
[    11.341] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    11.341] (II) Module intel: vendor="X.Org Foundation"
[    11.341]     compiled for 1.11.2, module version = 2.17.0
[    11.341]     Module class: X.Org Video Driver
[    11.341]     ABI class: X.Org Video Driver, version 11.0
[    11.341] (II) LoadModule: "vesa"
[    11.342] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    11.342] (II) Module vesa: vendor="X.Org Foundation"
[    11.342]     compiled for 1.11.2, module version = 2.3.0
[    11.342]     Module class: X.Org Video Driver
[    11.342]     ABI class: X.Org Video Driver, version 11.0
[    11.342] (II) LoadModule: "fbdev"
[    11.342] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    11.342] (II) Module fbdev: vendor="X.Org Foundation"
[    11.342]     compiled for 1.11.2, module version = 0.4.2
[    11.342]     Module class: X.Org Video Driver
[    11.342]     ABI class: X.Org Video Driver, version 11.0
[    11.342] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    11.343] (II) VESA: driver for VESA chipsets: vesa
[    11.343] (II) FBDEV: driver for framebuffer: fbdev
[    11.343] (++) using VT number 7

[    11.345] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    11.345] (WW) Falling back to old probe method for vesa
[    11.345] (WW) Falling back to old probe method for fbdev
[    11.345] (II) Loading sub module "fbdevhw"
[    11.345] (II) LoadModule: "fbdevhw"
[    11.345] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    11.345] (II) Module fbdevhw: vendor="X.Org Foundation"
[    11.345]     compiled for 1.11.2, module version = 0.0.2
[    11.345]     ABI class: X.Org Video Driver, version 11.0
[    11.345] drmOpenDevice: node name is /dev/dri/card0
[    11.345] drmOpenDevice: open result is 12, (OK)
[    11.345] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    11.345] drmOpenDevice: node name is /dev/dri/card0
[    11.345] drmOpenDevice: open result is 12, (OK)
[    11.345] drmOpenByBusid: drmOpenMinor returns 12
[    11.345] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    11.345] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    11.345] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    11.345] (==) intel(0): RGB weight 888
[    11.345] (==) intel(0): Default visual is TrueColor
[    11.345] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    11.345] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[    11.346] (**) intel(0): Relaxed fencing enabled
[    11.346] (**) intel(0): Wait on SwapBuffers? enabled
[    11.346] (**) intel(0): Triple buffering? enabled
[    11.346] (**) intel(0): Framebuffer tiled
[    11.346] (**) intel(0): Pixmaps tiled
[    11.346] (**) intel(0): 3D buffers tiled
[    11.346] (**) intel(0): SwapBuffers wait enabled
[    11.346] (==) intel(0): video overlay key set to 0x101fe
[    11.346] (II) intel(0): Output LVDS1 has no monitor section
[    11.346] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    11.346] (II) intel(0): Output VGA1 has no monitor section
[    11.346] (II) intel(0): EDID for output LVDS1
[    11.346] (II) intel(0): Manufacturer: CMO  Model: 1807  Serial#: 0
[    11.346] (II) intel(0): Year: 2009  Week: 2
[    11.346] (II) intel(0): EDID Version: 1.3
[    11.346] (II) intel(0): Digital Display Input
[    11.346] (II) intel(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    11.346] (II) intel(0): Gamma: 2.20
[    11.346] (II) intel(0): No DPMS capabilities specified
[    11.346] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    11.346] (II) intel(0): First detailed timing is preferred mode
[    11.346] (II) intel(0): redX: 0.624 redY: 0.361   greenX: 0.337 greenY: 0.607
[    11.346] (II) intel(0): blueX: 0.164 blueY: 0.086   whiteX: 0.313 whiteY: 0.329
[    11.346] (II) intel(0): Manufacturer's mask: 0
[    11.346] (II) intel(0): Supported detailed timing:
[    11.346] (II) intel(0): clock: 138.7 MHz   Image Size:  408 x 230 mm
[    11.346] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    11.346] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    11.346] (II) intel(0):  N184H6-L02
[    11.346] (II) intel(0):  CMO
[    11.346] (II) intel(0):  N184H6-L02
[    11.346] (II) intel(0): EDID (in hex):
[    11.346] (II) intel(0):     00ffffffffffff000daf071800000000
[    11.346] (II) intel(0):     02130103802917780ae6059f5c569b2a
[    11.346] (II) intel(0):     16505400000001010101010101010101
[    11.346] (II) intel(0):     010101010101293680a070381f403020
[    11.346] (II) intel(0):     350098e610000018000000fe004e3138
[    11.346] (II) intel(0):     3448362d4c30320a2020000000fe0043
[    11.346] (II) intel(0):     4d4f0a202020202020202020000000fe
[    11.346] (II) intel(0):     004e31383448362d4c30320a20200035
[    11.346] (II) intel(0): EDID vendor "CMO", prod id 6151
[    11.346] (II) intel(0): Printing DDC gathered Modelines:
[    11.346] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    11.346] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    11.346] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    11.346] (II) intel(0): Printing probed modes for output LVDS1
[    11.347] (II) intel(0): Modeline "1920x1080"x60.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    11.347] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[    11.347] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    11.347] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    11.347] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
[    11.347] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[    11.347] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    11.347] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    11.347] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    11.347] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    11.347] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    11.347] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    11.347] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    11.347] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    11.347] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    11.347] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    11.347] (II) intel(0): EDID for output VGA1
[    11.347] (II) intel(0): Output LVDS1 connected
[    11.347] (II) intel(0): Output VGA1 disconnected
[    11.347] (II) intel(0): Using exact sizes for initial modes
[    11.347] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[    11.347] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    11.347] (II) intel(0): Kernel page flipping support detected, enabling
[    11.347] (**) intel(0): Display dimensions: (410, 230) mm
[    11.347] (**) intel(0): DPI set to (118, 119)
[    11.347] (II) Loading sub module "fb"
[    11.347] (II) LoadModule: "fb"
[    11.347] (II) Loading /usr/lib/xorg/modules/libfb.so
[    11.347] (II) Module fb: vendor="X.Org Foundation"
[    11.347]     compiled for 1.11.2, module version = 1.0.0
[    11.347]     ABI class: X.Org ANSI C Emulation, version 0.4
[    11.347] (II) Loading sub module "dri2"
[    11.347] (II) LoadModule: "dri2"
[    11.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    11.347] (II) Module dri2: vendor="X.Org Foundation"
[    11.347]     compiled for 1.11.2, module version = 1.2.0
[    11.347]     ABI class: X.Org Server Extension, version 6.0
[    11.347] (II) UnloadModule: "vesa"
[    11.347] (II) Unloading vesa
[    11.347] (II) UnloadModule: "fbdev"
[    11.347] (II) Unloading fbdev
[    11.347] (II) UnloadModule: "fbdevhw"
[    11.347] (II) Unloading fbdevhw
[    11.347] (==) Depth 24 pixmap format is 32 bpp
[    11.348] (II) intel(0): [DRI2] Setup complete
[    11.348] (II) intel(0): [DRI2]   DRI driver: i965
[    11.348] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[    11.349] (II) UXA(0): Driver registered support for the following operations:
[    11.349] (II)         solid
[    11.349] (II)         copy
[    11.349] (II)         composite (RENDER acceleration)
[    11.349] (II)         put_image
[    11.349] (II)         get_image
[    11.349] (==) intel(0): Backing store disabled
[    11.349] (==) intel(0): Silken mouse enabled
[    11.349] (II) intel(0): Initializing HW Cursor
[    11.412] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    11.412] (==) intel(0): DPMS enabled
[    11.412] (==) intel(0): Intel XvMC decoder enabled
[    11.412] (II) intel(0): Set up textured video
[    11.412] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    11.412] (II) intel(0): direct rendering: DRI2 Enabled
[    11.412] (==) intel(0): hotplug detection: "enabled"
[    11.412] (--) RandR disabled
[    11.412] (II) Initializing built-in extension Generic Event Extension
[    11.412] (II) Initializing built-in extension SHAPE
[    11.412] (II) Initializing built-in extension MIT-SHM
[    11.412] (II) Initializing built-in extension XInputExtension
[    11.412] (II) Initializing built-in extension XTEST
[    11.412] (II) Initializing built-in extension BIG-REQUESTS
[    11.413] (II) Initializing built-in extension SYNC
[    11.413] (II) Initializing built-in extension XKEYBOARD
[    11.413] (II) Initializing built-in extension XC-MISC
[    11.413] (II) Initializing built-in extension SECURITY
[    11.413] (II) Initializing built-in extension XINERAMA
[    11.413] (II) Initializing built-in extension XFIXES
[    11.413] (II) Initializing built-in extension RENDER
[    11.413] (II) Initializing built-in extension RANDR
[    11.413] (II) Initializing built-in extension COMPOSITE
[    11.413] (II) Initializing built-in extension DAMAGE
[    11.424] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
[    11.427] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    11.427] (II) AIGLX: enabled GLX_INTEL_swap_event
[    11.427] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    11.427] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    11.428] (II) AIGLX: Loaded and initialized i965
[    11.428] (II) GLX: Initialized DRI2 GL provider for screen 0
[    11.428] (II) intel(0): Setting screen physical size to 507 x 285
[    11.437] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    11.440] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    11.440] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.440] (II) LoadModule: "evdev"
[    11.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.441] (II) Module evdev: vendor="X.Org Foundation"
[    11.441]     compiled for 1.11.0, module version = 2.6.0
[    11.441]     Module class: X.Org XInput Driver
[    11.441]     ABI class: X.Org XInput driver, version 13.0
[    11.441] (II) Using input driver 'evdev' for 'Power Button'
[    11.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.441] (**) Power Button: always reports core events
[    11.441] (**) evdev: Power Button: Device: "/dev/input/event3"
[    11.441] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.441] (--) evdev: Power Button: Found keys
[    11.441] (II) evdev: Power Button: Configuring as keyboard
[    11.441] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    11.441] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.441] (**) Option "xkb_rules" "evdev"
[    11.441] (**) Option "xkb_model" "pc105"
[    11.441] (**) Option "xkb_layout" "fr"
[    11.443] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[    11.444] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    11.444] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    11.444] (II) Using input driver 'evdev' for 'Video Bus'
[    11.444] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.444] (**) Video Bus: always reports core events
[    11.444] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    11.444] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    11.444] (--) evdev: Video Bus: Found keys
[    11.444] (II) evdev: Video Bus: Configuring as keyboard
[    11.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[    11.444] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    11.444] (**) Option "xkb_rules" "evdev"
[    11.444] (**) Option "xkb_model" "pc105"
[    11.444] (**) Option "xkb_layout" "fr"
[    11.445] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    11.445] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    11.445] (II) Using input driver 'evdev' for 'Video Bus'
[    11.445] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.445] (**) Video Bus: always reports core events
[    11.445] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    11.445] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    11.445] (--) evdev: Video Bus: Found keys
[    11.445] (II) evdev: Video Bus: Configuring as keyboard
[    11.445] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input5/event5"
[    11.445] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    11.445] (**) Option "xkb_rules" "evdev"
[    11.445] (**) Option "xkb_model" "pc105"
[    11.445] (**) Option "xkb_layout" "fr"
[    11.445] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.445] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.445] (II) Using input driver 'evdev' for 'Power Button'
[    11.445] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.445] (**) Power Button: always reports core events
[    11.446] (**) evdev: Power Button: Device: "/dev/input/event0"
[    11.446] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.446] (--) evdev: Power Button: Found keys
[    11.446] (II) evdev: Power Button: Configuring as keyboard
[    11.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    11.446] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    11.446] (**) Option "xkb_rules" "evdev"
[    11.446] (**) Option "xkb_model" "pc105"
[    11.446] (**) Option "xkb_layout" "fr"
[    11.446] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    11.446] (II) No input driver/identifier specified (ignoring)
[    11.446] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    11.446] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    11.446] (II) Using input driver 'evdev' for 'Sleep Button'
[    11.446] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.446] (**) Sleep Button: always reports core events
[    11.446] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    11.446] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    11.446] (--) evdev: Sleep Button: Found keys
[    11.446] (II) evdev: Sleep Button: Configuring as keyboard
[    11.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    11.446] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    11.446] (**) Option "xkb_rules" "evdev"
[    11.446] (**) Option "xkb_model" "pc105"
[    11.446] (**) Option "xkb_layout" "fr"
[    11.447] (II) config/udev: Adding input device ASUS USB2.0 WebCam (/dev/input/event8)
[    11.447] (**) ASUS USB2.0 WebCam: Applying InputClass "evdev keyboard catchall"
[    11.447] (II) Using input driver 'evdev' for 'ASUS USB2.0 WebCam'
[    11.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.447] (**) ASUS USB2.0 WebCam: always reports core events
[    11.447] (**) evdev: ASUS USB2.0 WebCam: Device: "/dev/input/event8"
[    11.447] (--) evdev: ASUS USB2.0 WebCam: Vendor 0x58f Product 0xa016
[    11.447] (--) evdev: ASUS USB2.0 WebCam: Found keys
[    11.447] (II) evdev: ASUS USB2.0 WebCam: Configuring as keyboard
[    11.447] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event8"
[    11.447] (II) XINPUT: Adding extended input device "ASUS USB2.0 WebCam" (type: KEYBOARD, id 11)
[    11.447] (**) Option "xkb_rules" "evdev"
[    11.447] (**) Option "xkb_model" "pc105"
[    11.447] (**) Option "xkb_layout" "fr"
[    11.448] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    11.448] (II) No input driver/identifier specified (ignoring)
[    11.448] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    11.448] (II) No input driver/identifier specified (ignoring)
[    11.448] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[    11.448] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    11.448] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    11.448] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.448] (**) Logitech USB Receiver: always reports core events
[    11.448] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[    11.448] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc508
[    11.448] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    11.448] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    11.448] (--) evdev: Logitech USB Receiver: Found relative axes
[    11.448] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    11.448] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    11.448] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    11.449] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    11.449] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.449] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7/event7"
[    11.449] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[    11.449] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    11.449] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    11.449] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    11.449] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.449] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.449] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    11.449] (II) No input driver/identifier specified (ignoring)
[    11.449] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[    11.449] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    11.449] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    11.449] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.449] (**) Asus WMI hotkeys: always reports core events
[    11.449] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[    11.449] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    11.449] (--) evdev: Asus WMI hotkeys: Found keys
[    11.449] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    11.449] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event11"
[    11.449] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[    11.449] (**) Option "xkb_rules" "evdev"
[    11.449] (**) Option "xkb_model" "pc105"
[    11.449] (**) Option "xkb_layout" "fr"
[    11.450] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    11.450] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    11.450] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    11.450] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.450] (**) AT Translated Set 2 keyboard: always reports core events
[    11.450] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    11.450] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    11.450] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    11.450] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    11.450] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    11.450] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    11.450] (**) Option "xkb_rules" "evdev"
[    11.450] (**) Option "xkb_model" "pc105"
[    11.450] (**) Option "xkb_layout" "fr"
[    11.451] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[    11.451] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    11.451] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    11.451] (II) LoadModule: "synaptics"
[    11.451] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    11.451] (II) Module synaptics: vendor="X.Org Foundation"
[    11.451]     compiled for 1.11.2, module version = 1.5.99
[    11.451]     Module class: X.Org XInput Driver
[    11.451]     ABI class: X.Org XInput driver, version 13.0
[    11.451] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    11.451] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    11.451] (**) ETPS/2 Elantech Touchpad: always reports core events
[    11.451] (**) Option "Device" "/dev/input/event12"
[    11.584] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 8 - 2508
[    11.736] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 8 - 1320
[    11.736] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    11.736] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 0
[    11.736] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    11.736] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    11.740] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    11.740] (**) ETPS/2 Elantech Touchpad: always reports core events
[    11.748] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    11.748] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[    11.748] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    11.748] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    11.748] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.071
[    11.748] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    11.748] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    11.748] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    11.748] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    11.748] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    11.748] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    11.748] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    12.048] (II) XKB: reuse xkmfile /var/lib/xkb/server-9A8405F3FE0A780485714A4B6DD41909C2CF9F83.xkm
[    12.723] (II) intel(0): EDID vendor "CMO", prod id 6151
[    12.723] (II) intel(0): Printing DDC gathered Modelines:
[    12.723] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    13.043] (II) intel(0): EDID vendor "CMO", prod id 6151
[    13.043] (II) intel(0): Printing DDC gathered Modelines:
[    13.043] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    15.501] (II) intel(0): EDID vendor "CMO", prod id 6151
[    15.501] (II) intel(0): Printing DDC gathered Modelines:
[    15.501] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    21.738] (II) XKB: reuse xkmfile /var/lib/xkb/server-07CF887C990349AD19C9526325692BF8BB2994CA.xkm
[    22.857] (II) intel(0): EDID vendor "CMO", prod id 6151
[    22.857] (II) intel(0): Printing DDC gathered Modelines:
[    22.857] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    23.474] (II) intel(0): EDID vendor "CMO", prod id 6151
[    23.474] (II) intel(0): Printing DDC gathered Modelines:
[    23.474] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    23.500] (II) intel(0): EDID vendor "CMO", prod id 6151
[    23.500] (II) intel(0): Printing DDC gathered Modelines:
[    23.500] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    25.139] (II) intel(0): EDID vendor "CMO", prod id 6151
[    25.139] (II) intel(0): Printing DDC gathered Modelines:
[    25.139] (II) intel(0): Modeline "1920x1080"x0.0  138.65  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz)
[    31.069] (II) XKB: reuse xkmfile /var/lib/xkb/server-07CF887C990349AD19C9526325692BF8BB2994CA.xkm
[   847.206] 
Backtrace:
[   847.206] 0: /usr/bin/X (xorg_backtrace+0x37) [0x81c0497]
[   847.206] 1: /usr/bin/X (0x8048000+0x17bffa) [0x81c3ffa]
[   847.206] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb786240c]
[   847.206] 3: /usr/lib/xorg/modules/extensions/librecord.so (0xb784f000+0x216f) [0xb785116f]
[   847.206] 4: /usr/bin/X (_CallCallbacks+0x3c) [0x807b0ac]
[   847.206] 5: /usr/bin/X (WriteToClient+0x209) [0x81c36a9]
[   847.206] 6: /usr/lib/xorg/modules/extensions/libdri2.so (ProcDRI2WaitMSCReply+0x70) [0xb7379dc0]
[   847.206] 7: /usr/lib/xorg/modules/extensions/libdri2.so (DRI2WaitMSCComplete+0x73) [0xb7378023]
[   847.206] 8: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x2442b) [0xb733142b]
[   847.206] 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x92b3) [0xb73162b3]
[   847.206] 10: /usr/lib/i386-linux-gnu/libdrm.so.2 (drmHandleEvent+0xce) [0xb73649ee]
[   847.206] 11: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x9317) [0xb7316317]
[   847.206] 12: /usr/bin/X (WakeupHandler+0x65) [0x807a8f5]
[   847.206] 13: /usr/bin/X (WaitForSomething+0x1a5) [0x81bd715]
[   847.206] 14: /usr/bin/X (0x8048000+0x2e552) [0x8076552]
[   847.206] 15: /usr/bin/X (0x8048000+0x1c47a) [0x806447a]
[   847.207] 16: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0xb7513113]
[   847.207] 17: /usr/bin/X (0x8048000+0x1c7a9) [0x80647a9]
[   847.207] Segmentation fault at address 0xb5ca8008
[   847.207] 
Caught signal 11 (Segmentation fault). Server aborting
[   847.207] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   847.207] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   847.207] 
[   847.256] (II) evdev: Power Button: Close
[   847.256] (II) UnloadModule: "evdev"
[   847.256] (II) Unloading evdev
[   847.328] (II) evdev: Video Bus: Close
[   847.328] (II) UnloadModule: "evdev"
[   847.328] (II) Unloading evdev
[   847.444] (II) evdev: Video Bus: Close
[   847.444] (II) UnloadModule: "evdev"
[   847.444] (II) Unloading evdev
[   847.572] (II) evdev: Power Button: Close
[   847.572] (II) UnloadModule: "evdev"
[   847.572] (II) Unloading evdev
[   847.700] (II) evdev: Sleep Button: Close
[   847.700] (II) UnloadModule: "evdev"
[   847.700] (II) Unloading evdev
[   847.824] (II) evdev: ASUS USB2.0 WebCam: Close
[   847.824] (II) UnloadModule: "evdev"
[   847.824] (II) Unloading evdev
[   847.923] (II) evdev: Logitech USB Receiver: Close
[   847.923] (II) UnloadModule: "evdev"
[   847.923] (II) Unloading evdev
[   847.972] (II) evdev: Asus WMI hotkeys: Close
[   847.972] (II) UnloadModule: "evdev"
[   847.972] (II) Unloading evdev
[   848.067] (II) evdev: AT Translated Set 2 keyboard: Close
[   848.067] (II) UnloadModule: "evdev"
[   848.067] (II) Unloading evdev
[   848.301] (II) UnloadModule: "synaptics"
[   848.301] (II) Unloading synaptics
[   848.301] (II) AIGLX: Suspending AIGLX clients for VT switch
[   848.377]  ddxSigGiveUp: Closing log
[   848.377] Server terminated with error (1). Closing log file.

à demain soir pour le résultat des courses : me connecterais surement ce soir mais pas de mon PC

Nepenthes · Le 28/11/2011, à 08:33

Qu'en est-il du support de CUDA avec bumblebee ?
Je suis en train d'installer le jeu Rage via Wine, et j'aimerais savoir si je peux utiliser CUDA pour accélérer le décodage des textures.

Fepalkon · Le 28/11/2011, à 08:55

ArchangeGabriel a écrit :

Pour la manip que tu indiques, il s'agit d'une solution temporaire pour un bug introduit par le kernel 3.0 en fait, qui sera corrigé par le 3.2 ou 3.3 plus probablement.
Du coup, si passer ces options maintenant marche, il faudra faire attention à changer ces options lors de la mise à jour vers le kernel correspondant.

Merci d'avoir spécifié cela, ça m'évitera des soucis lors d'une MAJ. Encore faut-il que j'y fasse attention. ^^

@Anthony25

J'ai ajouté 1 par 1 les modifications en mettant à jour GRUB à chaque fois. Mais n'ai pas eu de problèmes, dommage que ça cloche chez toi

Anthony25 · Le 28/11/2011, à 11:52

Fepalkon a écrit :

@Anthony25
J'ai ajouté 1 par 1 les modifications en mettant à jour GRUB à chaque fois. Mais n'ai pas eu de problèmes, dommage que ça cloche chez toi

En fait je n'avais pas bien testé la fonction : j'ai l'habitude quand je passe sur batterie de mettre mon proc en "powersave" (add-on pour gnome qui te permet de régler la fréquence de ton proc), donc la fréquence est fixée au minimum, c'est à dire 800MHz.
Et j'ai remarqué que lorsque l'économie d’énergie est activée sur la carte graphique intégrée, les effets de gnome-shell utilisent plus le proc que la carte graphique, car c'est trop "rapide" pour pouvoir la switcher du mode économie d’énergie au mode normal. Alors que si tu vas sur youtube ou que tu regardes une vidéo en HD, la carte graphique va switcher en mode "normal" car elle a le temps de le faire, donc là ça ne gène pas.

Finalement j'ai activé cette option, mais je laisse mon proc sur "on-demand" (fréquence qui varie automatiquement), et là j’atteins les 4h - 4h30 au lieu de 3h avec le wifi, et c'est fluide

Fepalkon · Le 28/11/2011, à 16:32

Anthony25 a écrit :

En fait je n'avais pas bien testé la fonction : j'ai l'habitude quand je passe sur batterie de mettre mon proc en "powersave" (add-on pour gnome qui te permet de régler la fréquence de ton proc), donc la fréquence est fixée au minimum, c'est à dire 800MHz.
Et j'ai remarqué que lorsque l'économie d’énergie est activée sur la carte graphique intégrée, les effets de gnome-shell utilisent plus le proc que la carte graphique, car c'est trop "rapide" pour pouvoir la switcher du mode économie d’énergie au mode normal. Alors que si tu vas sur youtube ou que tu regardes une vidéo en HD, la carte graphique va switcher en mode "normal" car elle a le temps de le faire, donc là ça ne gène pas.
Finalement j'ai activé cette option, mais je laisse mon proc sur "on-demand" (fréquence qui varie automatiquement), et là j’atteins les 4h - 4h30 au lieu de 3h avec le wifi, et c'est fluide

Ha c'est cool si t'as trouvé une solution! Je connaissais pas "powersave". J'ai découvert "Jupiter" qui gère l’énergie pour les eee-pc, du coup je suppose que c'est un peu le même principe. Mais comme l'a dit AG, ça risque d'être instable lors d'une MAJ (à moins que la MAJ réinitialise tout ça automatiquement? ça je ne sais pas...) alors si tu met à jour et que ça foire, pense à enlever ces lignes. Enfin bref, après 3 réinstall, j'ai enfin un système propre et qui dure!! Merci à la communauté!

Anthony25 · Le 28/11/2011, à 17:27

Fepalkon a écrit :

Ha c'est cool si t'as trouvé une solution! Je connaissais pas "powersave". J'ai découvert "Jupiter" qui gère l’énergie pour les eee-pc, du coup je suppose que c'est un peu le même principe. Mais comme l'a dit AG, ça risque d'être instable lors d'une MAJ (à moins que la MAJ réinitialise tout ça automatiquement? ça je ne sais pas...) alors si tu met à jour et que ça foire, pense à enlever ces lignes. Enfin bref, après 3 réinstall, j'ai enfin un système propre et qui dure!! Merci à la communauté!

Je ne pense pas que ça sera "instable", c'est juste moins clean que la solution sera intégrée à partir de la branche 3.2 ou 3.3. Et ça m'étonnerait que la MAJ modifie les options de grub

Et ce n'est pas vraiment pareil que Jupiter, mon applet gère juste la fréquence du proc, rien d'autre.

ArchangeGabriel · Le 28/11/2011, à 20:05

Sp0tnik a écrit :

@ArchangeGabriel

Une fenêtre s'ouvre, tu copies :
blacklist nouveau

Veux bien dire copié/collé dans le fichier fraichement ouvert? Si oui, j'ai le même message d'erreur que précédemment avec le nouveau logfile:

[     20.77] Bumblebee log started at Mon, 28 Nov 2011 06:52:25 +0100
[     20.77] Creating fifo /var/run/bumblebee.fifo for communication...
[     20.78] Making FIFO writable for members of group bumblebee
[     20.78] Power management is disabled, not disabling card on start.
[     20.78] Waiting for orders
[    673.66] Optirun start request received.
[    673.66] Checking for X server availability before starting X...
[    673.67] X server is not started
[    673.67] Power management is disabled, only loading driver
[    673.93] insmod /lib/modules/3.0.0-13-generic/updates/dkms/nvidia_current.ko 
[    673.93] Starting X using nvidia...
[    673.93] Waiting for X server to become available...
[    684.41] The Bumblebee X server failed to start. Please check /var/log/Xorg.8.log
[    684.41] Waiting for orders

Ben on progresse, le message d'erreur a changé ici, maintenant on va s'intéresser au fichier /var/log/Xorg.8.log comme indiqué s'il te plaît.

@Qid : Effectivement, c'est un crash, apparemment le driver intel, c'est l'un des problèmes potentiels de l'utilisation des derniers drivers compilés depuis git. Cela dit, puisque dans ton cas l'utilisation de xorg-edgers n'avait pas résolu ton problème, tu peux considérer le retour en arrière aux versions stables de ces paquets. Ou reporter le bug, mais je ne sais pas où ni comment.

La partie intéressante :

[   847.206] Backtrace:
[   847.206] 0: /usr/bin/X (xorg_backtrace+0x37) [0x81c0497]
[   847.206] 1: /usr/bin/X (0x8048000+0x17bffa) [0x81c3ffa]
[   847.206] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb786240c]
[   847.206] 3: /usr/lib/xorg/modules/extensions/librecord.so (0xb784f000+0x216f) [0xb785116f]
[   847.206] 4: /usr/bin/X (_CallCallbacks+0x3c) [0x807b0ac]
[   847.206] 5: /usr/bin/X (WriteToClient+0x209) [0x81c36a9]
[   847.206] 6: /usr/lib/xorg/modules/extensions/libdri2.so (ProcDRI2WaitMSCReply+0x70) [0xb7379dc0]
[   847.206] 7: /usr/lib/xorg/modules/extensions/libdri2.so (DRI2WaitMSCComplete+0x73) [0xb7378023]
[   847.206] 8: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x2442b) [0xb733142b]
[   847.206] 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x92b3) [0xb73162b3]
[   847.206] 10: /usr/lib/i386-linux-gnu/libdrm.so.2 (drmHandleEvent+0xce) [0xb73649ee]
[   847.206] 11: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb730d000+0x9317) [0xb7316317]
[   847.206] 12: /usr/bin/X (WakeupHandler+0x65) [0x807a8f5]
[   847.206] 13: /usr/bin/X (WaitForSomething+0x1a5) [0x81bd715]
[   847.206] 14: /usr/bin/X (0x8048000+0x2e552) [0x8076552]
[   847.206] 15: /usr/bin/X (0x8048000+0x1c47a) [0x806447a]
[   847.207] 16: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0xb7513113]
[   847.207] 17: /usr/bin/X (0x8048000+0x1c7a9) [0x80647a9]
[   847.207] Segmentation fault at address 0xb5ca8008
[   847.207] Caught signal 11 (Segmentation fault). Server aborting

Qid · Le 28/11/2011, à 20:31

ArchangeGabriel a écrit :

@Qid : Effectivement, c'est un crash, apparemment le driver intel, c'est l'un des problèmes potentiels de l'utilisation des derniers drivers compilés depuis git. Cela dit, puisque dans ton cas l'utilisation de xorg-edgers n'avait pas résolu ton problème, tu peux considérer le retour en arrière aux versions stables de ces paquets.

wai certes ... j'y penserais si ça devient trop régulier ... mais j'avoue que meme si sous ubuntu je n'ai pas réellement besoin de la nvidia je préfèrerais pour le principe qu'elle marche comme il faut ...
et comme on peut apparemment que difficilement faire grimper l'un sans l'autre ... ... snif ...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#876 Le 26/11/2011, à 23:09

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#877 Le 26/11/2011, à 23:41

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#878 Le 26/11/2011, à 23:47

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#879 Le 26/11/2011, à 23:53

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#880 Le 27/11/2011, à 00:11

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#881 Le 27/11/2011, à 08:47

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#882 Le 27/11/2011, à 09:08

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#883 Le 27/11/2011, à 12:21

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#884 Le 27/11/2011, à 12:39

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#885 Le 27/11/2011, à 15:27

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#886 Le 27/11/2011, à 16:56

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#887 Le 27/11/2011, à 18:37

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#888 Le 27/11/2011, à 18:45

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#889 Le 27/11/2011, à 20:40

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#890 Le 27/11/2011, à 21:08

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#891 Le 28/11/2011, à 01:20

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#892 Le 28/11/2011, à 07:06

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#893 Le 28/11/2011, à 08:07

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#894 Le 28/11/2011, à 08:33

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#895 Le 28/11/2011, à 08:55

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#896 Le 28/11/2011, à 11:52

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#897 Le 28/11/2011, à 16:32

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#898 Le 28/11/2011, à 17:27

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#899 Le 28/11/2011, à 20:05

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#900 Le 28/11/2011, à 20:31

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

Pied de page des forums