#76 Le 03/01/2007, à 21:24
- juju_teamp2p
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Moi quand je fait ceci "adesklets --nautilus" rien ne se passe, pas de yab-0-0.2 en vue 
je doit faire quoi exactement à ce passage la?
- enfin, le fichier nom_du_desklet.py. C'est ce fichier qui permet de lancer notre desklet. On peut par exemple double-cliquer dessus et lancer dans un terminal. On nous demande alors si l'on veut le tester (dans ce cas il ne se relancera pas la prochaine fois qu'on démarre adesklets) ou l'enregistrer (pour qu'il apparaisse au prochain démarrage de adesklets).
www.p2p-area.com: telecharger des logiciels libres!
www.linux-inside.fr: Partagez vos experiences dans le domaine du monde libre de Linux
Hors ligne
#77 Le 03/01/2007, à 21:32
- juju_teamp2p
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
A non c'est bon ça marche lol Peut on y rajouter d'autres icones? pourquoi quand je clique droit puis configuration rien ne se passe?
www.p2p-area.com: telecharger des logiciels libres!
www.linux-inside.fr: Partagez vos experiences dans le domaine du monde libre de Linux
Hors ligne
#78 Le 04/01/2007, à 08:23
- Oni
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
juju_teamp2p a écrit :
A non c'est bon ça marche lol Peut on y rajouter d'autres icones? pourquoi quand je clique droit puis configuration rien ne se passe?
La configuration se fait normalement dans le fichier config.txt. 
« La nature a créé des différences, l'Homme en a fait des inégalités. »
Hors ligne
#79 Le 04/01/2007, à 18:02
- juju_teamp2p
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Oni a écrit :
juju_teamp2p a écrit :A non c'est bon ça marche lol Peut on y rajouter d'autres icones? pourquoi quand je clique droit puis configuration rien ne se passe?
La configuration se fait normalement dans le fichier config.txt.
oki merci pour l'info!
www.p2p-area.com: telecharger des logiciels libres!
www.linux-inside.fr: Partagez vos experiences dans le domaine du monde libre de Linux
Hors ligne
#80 Le 05/02/2007, à 16:06
- Chupa
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
bonjour à toutes et à tous !
j'ai quand meme une petite question par rapport à system monitor.
en recopiant le config.txt de Aldones, mais après un certain temps de bidouillage, voici mon config.txt (il se ralonge tout seul...)
id0 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id1 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4})
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id10 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id11 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id12 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id13 = {'background colour': (210, 210, 210, 130),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id14 = {'background colour': (210, 210, 210, 130),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (0, 0, 0, 200),
'update speed': 1}
id15 = {'background colour': (210, 210, 210, 130),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth0',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (0, 0, 0, 200),
'update speed': 1}
id2 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id20 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),,
'text colour': (97, 205, 252, 200),
'update speed': 1}
id21 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id3 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id4 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id5 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id6 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id7 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id8 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}
id9 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}ya un problème non? en plus un config si long, c'est super difficile de voir si on a bien changé partout au meme endroit (enfin jme comprends 
)
Quelqun aurait une idée pour éviter que celui-ci s'allonge jusqu'à je ne sais pas où? merci !
Dernière modification par Chupa (Le 05/02/2007, à 16:08)
Hors ligne
#81 Le 05/02/2007, à 22:33
- Oni
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
id0 = {'background colour': (210, 210, 210, 0),
'background images': ['images/shared/bg_top.png',
'images/shared/bg_middle.png',
'images/shared/bg_bottom.png'],
'meters': [('CPUMeter',
{'horizontal padding': 8,
'icon': 'images/icons/cpu.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'vertical padding': 8}),
('MemoryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/memory.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 10,
'vertical padding': 8}),
('SwapMeter',
{'horizontal padding': 8,
'icon': 'images/icons/swap.png',
'krell': 'images/shared/krell_blue_small.png.png',
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update speed': 30,
'vertical padding': 8}),
('NetworkMeter',
{'horizontal padding': 8,
'icon': 'images/icons/network.png',
'interface name': 'eth1',
'krell': ['images/shared/krell_green_small.png',
'images/shared/krell_red_small.png'],
'max down speed': 400,
'max up speed': 80,
'meter font name': 'Vera',
'meter font size': 7,
'trough': 'images/shared/trough_small.png',
'update speed': 2,
'vertical padding': 4}),
('DiskSpaceMeter',
{'horizontal padding': 8,
'icon': 'images/icons/diskfree.png',
'krell': 'images/shared/krell_blue_small.png',
'meter font name': 'Vera',
'meter font size': 6,
'trough': 'images/shared/trough_small.png',
'update speed': 60,
'vertical padding': 2}),
('TemperatureMeter',
{'file': '/proc/acpi/thermal_zone/THM/temperature',
'horizontal padding': 8,
'icon': 'images/icons/temperature.png',
'krell': 'images/shared/krell_red_small.png',
'max_temp': 100.0,
'meter font name': 'Vera',
'meter font size': 8,
'trough': 'images/shared/trough.png',
'update_speed': 30,
'vertical padding': 8}),
('BatteryMeter',
{'horizontal padding': 8,
'icon': 'images/icons/battery.png',
'info_file': '/proc/acpi/battery/BAT0/info',
'krell': 'images/shared/krell_green_small.png',
'label': '',
'meter font name': 'Vera',
'meter font size': 8,
'state_file': '/proc/acpi/battery/BAT0/state',
'trough': 'images/shared/trough.png',
'update_speed': 10,
'vertical padding': 8})],
'text colour': (97, 205, 252, 200),
'update speed': 1}Je veux pas dire de connerie, mais je crois que le code ci-dessus suffit.
id1, id2, id3... c'est pour si tu veux mettre plusieurs sytemonitor sur ton bureau avec différentes configs (pas trop d'intérêt)
« La nature a créé des différences, l'Homme en a fait des inégalités. »
Hors ligne
#82 Le 06/02/2007, à 19:51
- Chupa
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
merci bien pour ta réponse. mais cela je m'en doutais déjà. ce que je ne comprends pas, c'est pourquoi le pc rajoute tout seul autant de id... :-s
et je comprends pas non plus pourquoi, des fois system monitor fonctionne puis la fois d'après ne fonctionne plus... lol
c triste tout ca quand meme
Hors ligne
#83 Le 07/02/2007, à 15:06
- eldadou38
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Bonjour Choupa,
Alors là, je dois dire que cela est vraiment intriguant. j'utilise adesklet depuis le début et surtout le systemmonitor, et je n'ai jamais rencontré ce soucis. Attention, je ne remets pas ta parole en doute pas de méprise
Sinon, que Systememonitor se ferme tout seul, c'est possible puisque ca fonction est de monitorer ce que l'on lui a demandé de monitorer, exemple : il suffit que l'on démonte un disque ou que l'on retire la batterie d'un portable et systemmonitor disparait aussitôt.
Mais revenons à ton soucis de grossisement de fichier. Le fichier concerné est le config.txt, ce que je te propose de faire c'est de copier ton fichier config.txt en config.txt.choupa, d'effacer le config.txt, de faire un 'touch config.txt', faire un copier/coller de ce que te propose oni, d'enregistrer puis de retirer les droits d'écritures sur ce fichier en faisant un chmod -w config.txt, et si adesklet est lancé par ton propre login, il ne devrait plus se remplir.
Voilà, tiens nous au jus
In Ubuntu I trust
Hors ligne
#84 Le 07/02/2007, à 19:37
- Chupa
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
merci à toi Eldadou38 pour ta réponse. j'ai fait ce que tu m'as conseillé, mais systemonitor ne se lance toujours pas :'(
et depuis hier, wetherforecast ne se lance plus non plus alors qu'avant, c'était le premier à fonctionner :-s
ca commence à me prendre la tete de pas savoir pourquoi ca va pas 
:rolleyes:
Hors ligne
#85 Le 07/02/2007, à 20:43
- |-Corpse-|
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Chupa a écrit :
merci bien pour ta réponse. mais cela je m'en doutais déjà. ce que je ne comprends pas, c'est pourquoi le pc rajoute tout seul autant de id... :-s
et je comprends pas non plus pourquoi, des fois system monitor fonctionne puis la fois d'après ne fonctionne plus... lol
c triste tout ca quand meme
va voir dans le fichier ~/.adesklets
le code id correspondant à system monitor doit être le même dans .adesklets et dans le fichier de config. je pense aussi qu'il ne doit pas y avoir 2 fois le même id.
par exemple, chez moi id0 est dédié à weatherforecast, id1 à une fenetre de system monitor et id2 à une autre fenetre de system monitor.
Dernière modification par |-Corpse-| (Le 07/02/2007, à 20:44)
Hors ligne
#86 Le 08/02/2007, à 11:07
- Oni
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Chupa a écrit :
merci à toi Eldadou38 pour ta réponse. j'ai fait ce que tu m'as conseillé, mais systemonitor ne se lance toujours pas :'(
et depuis hier, wetherforecast ne se lance plus non plus alors qu'avant, c'était le premier à fonctionner :-s
ca commence à me prendre la tete de pas savoir pourquoi ca va pas
En cliquant, sur wetherforecast.py il ne se lance plus ?
« La nature a créé des différences, l'Homme en a fait des inégalités. »
Hors ligne
#87 Le 17/02/2007, à 11:19
- john_doe
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Bonjour tout le monde
Alors moi, la yab barre marche, je la vois, seulement, lorsque je clique sur une icone qui se trouve dessus pour lancer une application, la yab barre disparaît 
Quelqu'un a qui c'est déjà arrivé ?
Hors ligne
#88 Le 22/03/2007, à 00:34
- Kenneth
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Bonsoir ! Ou bonjour, en fait...
Bon bah je vais être l'exception qui confirme la règle, moi il ne se passe vraiment R.I.E.N , que je lance "adesklets" "adesklets --nautilus" ou même "adesklets -w nautilus -d 10 --nautilus" (là il me dit "error username" et me sort l'aide avec la liste des commandes) ...
Yab et System monitor sont bien "registered" mais ils n'apparaissent pas, aucun signe de vie de adesklets, en fait... =_=
Quelqu'un peut m'aider ?
#89 Le 22/03/2007, à 09:20
- |-Corpse-|
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Kenneth a écrit :
Bonsoir ! Ou bonjour, en fait...
Bon bah je vais être l'exception qui confirme la règle, moi il ne se passe vraiment R.I.E.N , que je lance "adesklets" "adesklets --nautilus" ou même "adesklets -w nautilus -d 10 --nautilus" (là il me dit "error username" et me sort l'aide avec la liste des commandes) ...
Yab et System monitor sont bien "registered" mais ils n'apparaissent pas, aucun signe de vie de adesklets, en fait... =_=
Quelqu'un peut m'aider ?
salut,
tu pourrais donner ce qu'il y a dans ton fichier /home/nom d'utilisateur/.adesklets ?
Et tant que tu y es, donner les fichier de config de tes desklets ?
Dernière modification par |-Corpse-| (Le 22/03/2007, à 09:20)
Hors ligne
#90 Le 24/03/2007, à 20:27
- adam0509
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
http://doc.ubuntu-fr.org/adesklets
Un wiki, c'est mieux qu'un forum tout de même 
PIII 533Mhz - 192Mo RAM - Geforce DDR - Win98SE/Xubuntu Feisty
AthlonXP2500+ - 512Mo DDR - ATI9600XT - WinXPSP2/Ubuntu Feisty
Dell Ubuntu - Dual Core - 1024Mo -...carte graphique à chier !!! (Intel 950)
Hors ligne
#91 Le 01/08/2007, à 10:36
- Haititi
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
bonjour!
j'ai un problème en faisant la compilation manuelle.
lorsque je lance ./configure voila ce que j'obtiens :
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for flex... no
checking for lex... no
checking for yywrap in -lfl... no
checking for yywrap in -ll... no
configure: WARNING:
-----------------------------------------------------
`flex' was not found on your system. If you encounter
problems recompiling a `l' file, please try `flex'
first. You can get it from any GNU archive site.
You will not need `flex' as long as you do not
modify `l' files.
----------------------------------------------------
checking for bison... no
checking for byacc... no
configure: WARNING:
-----------------------------------------------------
Nor `byacc' or `yacc' parsers had been used
for developing adesklets. If you encounter problems
recompiling a `y' file, please try `bison' instead.
You can get it from any GNU archive site. You will
not need `bison' as long as you do not modify
`y' files.
-----------------------------------------------------
checking for a BSD-compatible install... /usr/bin/install -c
checking for a Python interpreter with version >= 2.3... python
checking for python... /usr/bin/python
checking for python version... 2.5
checking for python platform... linux2
checking for python script directory... ${prefix}/lib/python2.5/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.5/site-packages
checking for Python include path... find: /usr/include/python/: No such file or directory
/usr/include/python2.4
checking for Python library path... find: /usr/lib/python: No such file or directory
find: /usr/lib/python/: No such file or directory
/usr/lib
checking python extra libraries...
checking for sigprocmask... yes
checking for perl... /usr/bin/perl
checking for perl version greater than or equal to 5.8.2... ok
checking for perl module IPC::Open3... ok
checking for help2man... no
checking for tidy... no
checking for doxygen... no
checking for ISO C99 warnings generation... yes
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking grp.h usability... yes
checking grp.h presence... yes
checking for grp.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking iconv.h usability... yes
checking iconv.h presence... yes
checking for iconv.h... yes
checking for debugging symbols generation... no
checking for sigkill timeout... yes
checking for polling frequency... checking for bc... yes
checking for lock files directory setting... yes
checking for control modifier on context menu... no
checking for legacy fake root window detection code... no
checking for frontend shell driver... yes
checking for date... (cached) yes
checking for uname... (cached) yes
checking for tputs in -lncurses... yes
checking for readline in -lreadline... yes
checking for add_history in -lhistory... yes
checking for free_history_entry in -lhistory... yes
checking for history max command lenght... yes
checking for pkg-config... /usr/bin/pkg-config
checking for fontconfig... no
configure: WARNING:
-----------------------------------------------------
`fontconfig' was not found on your system.
Although `adesklets' will work anyway system-wide
automatic font detection will not occur:
it is therefore quite possible that only the
default font provided with the package will display.
-----------------------------------------------------
checking for fork... yes
checking for X... libraries , headers
checking for XOpenDisplay in -lX11... yes
checking for imlib2-config... /usr/bin/imlib2-config
checking for imlib2 - version >= 1.1.2... yes
checking for imlib2... checking for imlib2 - version >= 1.2.0... yes
checking for imlib2 program linking with ad-hoc flags... yes
checking for uint typedef in standard library... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating utils/Makefile
config.status: creating doc/Makefile
config.status: creating doc/adesklets_checkin.1
config.status: creating doc/adesklets_submit.1
config.status: creating doc/htmldoc.sh
config.status: creating doc/imlib2/Makefile
config.status: creating scripting/Makefile
config.status: creating scripting/protoize.sh
config.status: creating scripting/python/Makefile
config.status: creating scripting/python/config.h
config.status: creating scripting/python/setup.py
config.status: creating scripting/perl/Makefile
config.status: creating scripting/perl/Makefile.PL
config.status: creating scripting/perl/updateproto.pl
config.status: creating utils/adesklets_frontend.sh
config.status: creating src/config.h
config.status: executing depfiles commandset voila ensuite ce que j'obtiens avec make :
Making all in src
make[1]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/src »
make all-am
make[2]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/src »
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-main.o -MD -MP -MF ".deps/adesklets-main.Tpo" -c -o adesklets-main.o `test -f 'main.c' || echo './'`main.c; \
then mv -f ".deps/adesklets-main.Tpo" ".deps/adesklets-main.Po"; else rm -f ".deps/adesklets-main.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-adesklets.o -MD -MP -MF ".deps/adesklets-adesklets.Tpo" -c -o adesklets-adesklets.o `test -f 'adesklets.c' || echo './'`adesklets.c; \
then mv -f ".deps/adesklets-adesklets.Tpo" ".deps/adesklets-adesklets.Po"; else rm -f ".deps/adesklets-adesklets.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-xwindow.o -MD -MP -MF ".deps/adesklets-xwindow.Tpo" -c -o adesklets-xwindow.o `test -f 'xwindow.c' || echo './'`xwindow.c; \
then mv -f ".deps/adesklets-xwindow.Tpo" ".deps/adesklets-xwindow.Po"; else rm -f ".deps/adesklets-xwindow.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-xmenu.o -MD -MP -MF ".deps/adesklets-xmenu.Tpo" -c -o adesklets-xmenu.o `test -f 'xmenu.c' || echo './'`xmenu.c; \
then mv -f ".deps/adesklets-xmenu.Tpo" ".deps/adesklets-xmenu.Po"; else rm -f ".deps/adesklets-xmenu.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-cfgfile.o -MD -MP -MF ".deps/adesklets-cfgfile.Tpo" -c -o adesklets-cfgfile.o `test -f 'cfgfile.c' || echo './'`cfgfile.c; \
then mv -f ".deps/adesklets-cfgfile.Tpo" ".deps/adesklets-cfgfile.Po"; else rm -f ".deps/adesklets-cfgfile.Tpo"; exit 1; fi
cfgfile.c:42: attention : qualificateurs de type ignorés pour le type à retourner par la fonction
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-cfg_parser.o -MD -MP -MF ".deps/adesklets-cfg_parser.Tpo" -c -o adesklets-cfg_parser.o `test -f 'cfg_parser.c' || echo './'`cfg_parser.c; \
then mv -f ".deps/adesklets-cfg_parser.Tpo" ".deps/adesklets-cfg_parser.Po"; else rm -f ".deps/adesklets-cfg_parser.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-cfg_scanner.o -MD -MP -MF ".deps/adesklets-cfg_scanner.Tpo" -c -o adesklets-cfg_scanner.o `test -f 'cfg_scanner.c' || echo './'`cfg_scanner.c; \
then mv -f ".deps/adesklets-cfg_scanner.Tpo" ".deps/adesklets-cfg_scanner.Po"; else rm -f ".deps/adesklets-cfg_scanner.Tpo"; exit 1; fi
cfg_scanner.c:1520: attention : «yyunput" defined but not used
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-command.o -MD -MP -MF ".deps/adesklets-command.Tpo" -c -o adesklets-command.o `test -f 'command.c' || echo './'`command.c; \
then mv -f ".deps/adesklets-command.Tpo" ".deps/adesklets-command.Po"; else rm -f ".deps/adesklets-command.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-event.o -MD -MP -MF ".deps/adesklets-event.Tpo" -c -o adesklets-event.o `test -f 'event.c' || echo './'`event.c; \
then mv -f ".deps/adesklets-event.Tpo" ".deps/adesklets-event.Po"; else rm -f ".deps/adesklets-event.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-variable.o -MD -MP -MF ".deps/adesklets-variable.Tpo" -c -o adesklets-variable.o `test -f 'variable.c' || echo './'`variable.c; \
then mv -f ".deps/adesklets-variable.Tpo" ".deps/adesklets-variable.Po"; else rm -f ".deps/adesklets-variable.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-vector.o -MD -MP -MF ".deps/adesklets-vector.Tpo" -c -o adesklets-vector.o `test -f 'vector.c' || echo './'`vector.c; \
then mv -f ".deps/adesklets-vector.Tpo" ".deps/adesklets-vector.Po"; else rm -f ".deps/adesklets-vector.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-vector_free.o -MD -MP -MF ".deps/adesklets-vector_free.Tpo" -c -o adesklets-vector_free.o `test -f 'vector_free.c' || echo './'`vector_free.c; \
then mv -f ".deps/adesklets-vector_free.Tpo" ".deps/adesklets-vector_free.Po"; else rm -f ".deps/adesklets-vector_free.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-tree.o -MD -MP -MF ".deps/adesklets-tree.Tpo" -c -o adesklets-tree.o `test -f 'tree.c' || echo './'`tree.c; \
then mv -f ".deps/adesklets-tree.Tpo" ".deps/adesklets-tree.Po"; else rm -f ".deps/adesklets-tree.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -MT adesklets-error.o -MD -MP -MF ".deps/adesklets-error.Tpo" -c -o adesklets-error.o `test -f 'error.c' || echo './'`error.c; \
then mv -f ".deps/adesklets-error.Tpo" ".deps/adesklets-error.Po"; else rm -f ".deps/adesklets-error.Tpo"; exit 1; fi
gcc -O2 -std=c99 -pedantic -Wall -DPKGDATADIR=\"/usr/local/share/adesklets\" -o adesklets -lX11 -lImlib2 -lncurses -lreadline -lhistory adesklets-main.o adesklets-adesklets.o adesklets-xwindow.o adesklets-xmenu.o adesklets-cfgfile.o adesklets-cfg_parser.o adesklets-cfg_scanner.o adesklets-command.o adesklets-event.o adesklets-variable.o adesklets-vector.o adesklets-vector_free.o adesklets-tree.o adesklets-error.o
make[2]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/src »
make[1]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/src »
Making all in data
make[1]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/data »
make[1]: Rien à faire pour « all ».
make[1]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/data »
Making all in scripting
make[1]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting »
Making all in .
make[2]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting »
make[2]: Rien à faire pour « all-am ».
make[2]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting »
Making all in python
make[2]: entrant dans le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting/python »
/usr/bin/python setup.py build
running build
running build_py
creating build
creating build/lib.linux-i686-2.5
creating build/lib.linux-i686-2.5/adesklets
copying adesklets/strings.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/configfile.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/events_handler.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/commands_handler.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/error_handler.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/singleton.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/utils.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/commands.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/children_handler.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/signal_handler.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/__init__.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/which.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/initializer.py -> build/lib.linux-i686-2.5/adesklets
copying adesklets/communicator.py -> build/lib.linux-i686-2.5/adesklets
running build_ext
building 'posix_signal' extension
creating build/temp.linux-i686-2.5
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.5 -c posix_signal.c -o build/temp.linux-i686-2.5/posix_signal.o
posix_signal.c:16:20: erreur: Python.h : Aucun fichier ou répertoire de ce type
posix_signal.c:24: erreur: expected «)" before «*" token
posix_signal.c:53: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «*" token
posix_signal.c:79: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «*" token
posix_signal.c:104: erreur: expected «)" before string constant
posix_signal.c:123: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «*" token
posix_signal.c:136: erreur: expected «)" before string constant
posix_signal.c:141: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «*" token
posix_signal.c:162: erreur: expected «)" before string constant
posix_signal.c:171: erreur: expected «)" before string constant
posix_signal.c:204: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «posix_signal_methods"
posix_signal.c:214: erreur: expected «=", «,", «;", «asm" or «__attribute__" before «initposix_signal"
error: command 'gcc' failed with exit status 1
make[2]: *** [python-compile] Erreur 1
make[2]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting/python »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/haithem/outils/adesklets/adesklets-0.6.1/scripting »
make: *** [all-recursive] Erreur 1quelqu'un pourrait m'aider à regler ca?
Dernière modification par Haititi (Le 01/08/2007, à 10:37)
Hors ligne
#92 Le 01/08/2007, à 10:54
- Haititi
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Stemp a écrit :
Il te manque probablement le paquet python-dev
jviens de reglé mon problème grace à ca 
un ptit sudo apt-get install python-dev
et c'est bon, le make fonctionne!
il faudrait peut etre mettre a jour ce tuto non? (dans le tuto, c'est le python2.4-dev qui est utilisé, alors qu'il faut le python2.5-dev
encore merci.
Hors ligne
#93 Le 01/08/2007, à 17:55
- toma222
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Bonjour,
J'ai mis à jour le tuto mais je pense qu'il faudrait mieux se fier au wiki. En effet je n'utilise plus Ubuntu depuis quelques temps (ni adesklets d'ailleurs) donc je ne me rend pas compte de ce genre de problèmes.
Hors ligne
#94 Le 02/08/2007, à 08:28
- Haititi
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
salut.
petit hors sujet (desolé...) : sur quelle distrib tu tournes maintenant? tu n'utilises plus adesklets? qu'utilises-tu à la place? merci pour ces petites infos
Hors ligne
#95 Le 02/08/2007, à 10:20
- toma222
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Salut,
J'ai dû te répondre hier par mail.
Hors ligne
#96 Le 03/08/2007, à 09:10
- Haititi
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
bon d'accord, ok, j'vais m'acheter une nouvelle memoire...:rolleyes:
Hors ligne
#97 Le 23/07/2008, à 17:31
- ben59
Re : [HOW TO] adesklets : installation sous Ubuntu Dapper et Edgy
Bonjour
Pendant la compilation lorsqu'il faut taper "make" j'ai ca :
ben@ben-laptop:~/adesklets-0.6.1$ make
Making all in src
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/src »
make all-am
make[2]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/src »
make[2]: quittant le répertoire « /home/ben/adesklets-0.6.1/src »
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1/src »
Making all in data
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/data »
make[1]: Rien à faire pour « all ».
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1/data »
Making all in scripting
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/scripting »
Making all in .
make[2]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/scripting »
make[2]: Rien à faire pour « all-am ».
make[2]: quittant le répertoire « /home/ben/adesklets-0.6.1/scripting »
Making all in python
make[2]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/scripting/python »
/usr/bin/python setup.py build
running build
running build_py
running build_ext
make[2]: quittant le répertoire « /home/ben/adesklets-0.6.1/scripting/python »
Making all in perl
make[2]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/scripting/perl »
make -f makefile.perl
make[3]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/scripting/perl »
make[3]: quittant le répertoire « /home/ben/adesklets-0.6.1/scripting/perl »
make[2]: quittant le répertoire « /home/ben/adesklets-0.6.1/scripting/perl »
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1/scripting »
Making all in utils
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/utils »
make[1]: Rien à faire pour « all ».
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1/utils »
Making all in doc
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1/doc »
make[1]: Rien à faire pour « all ».
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1/doc »
make[1]: entrant dans le répertoire « /home/ben/adesklets-0.6.1 »
make[1]: Rien à faire pour « all-am ».
make[1]: quittant le répertoire « /home/ben/adesklets-0.6.1 »
ben@ben-laptop:~/adesklets-0.6.1$Je galère...
Merci de votre aide