Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

Yogesh · Le 10/12/2011, à 14:57

Bonjour à tous et bravo pour votre magnifique travail;

Un ami a acheté un Samsung 300V core i7 avec une Nvidia Optimus et m'a demandé de lui installer une Ubuntu.
Le pauvre, il ne savait pas que Optimus c'est un méchant venu de la planéte Nvidia, mais bon, comme ce n'est pas une raison de le laisser tomber je lui ai installé une 10.10 avec Bumblebee,
Les résultats optirun glxsphere sont corrects (en moyenne 105 frames/s et 90 Megapixels. Il est toujours sur secteur alors la conso n'est pas le problème.
Le probléme c'est qu'il à aussi un grand écran Samsung et quand je le plug, la définition (préférence de l'écran) chute de 1366x768 (16:9) à 1024x768 (4:3) et bien sur l'image est distordue.

1°) Comme il n'est pas (encore) possible de faire tourner la Nvidia en permanence, lancer préférence de l'écran avec optirun (optirun gnome-display-properties) peut il marcher ??? donner un résultat ???

2°) Quand l'écran est pluggé le fait de faire Fn + F4 (touches hardware de selection d'ecran externe) fait planter X, on voit que quelque chose se passe (détection d'écran???) mais l'écran reste tout noir avec un reboot sauvage obligatoire.

Avez vous des idées de piste, je suis désolé mais je ne maitrise pas dutout Linux, je joue avec depuis des années mais je ne suis jamais rentré dedans; enfin pas trop loin en tout cas.

Merci de votre aide.

ArchangeGabriel · Le 10/12/2011, à 14:59

L'écran est relié comment ? En VGA, DVI, HDMI, DP, ... ?

Yogesh · Le 10/12/2011, à 16:31

Avec le cable prise bleu, VGA je suppose...

ArchangeGabriel · Le 10/12/2011, à 16:32

Oui, c'est du VGA.

Du coup, ce n'est pas un problème lié à Optimus, crée un nouveau topic et expliques-y ton problème.

Yogesh · Le 10/12/2011, à 16:39

Oui, mais si je lance une appli avec Optimus cette appli marche bien, alors ma question est plutôt : avec Optimus qui marche celà ne devrait il pas permettre d'avoir une résolution d'écran correcte sur un grand écran externe ?? Ou encore; c'est bien la puce Nvidia qui est chargée de gérer les grosses demandes graphique non ??? (désolé pour mon innocence...)
J'avais installé la même config sur son ordi précédent et le grand écran marchait nickel. Il s'est fait voler cet ordi et il à acheté cette machine avec Optimus. Pour moi c'est la seule différence entre les configs des deux machines.
Je subodore que quand je branche l'écran externe (par le VGA donc) le hardware cherche la puce Nvidia et ne la trouve pas et donc ca plante, et la seule solution qui me reste c'est de passer par préférence de l'écran, et là encore comme il ne trouve pas la Nvidia la résolution d'écran diminue.
Donc Bumblebee est il capable de gérer la Nvidia de Optimus afin:
1°) qu'elle soit détectée par le hardware quand je plug l'écran sur le VGA ???
2°) ou bien quand les préférences de l'écran sont activée pour gérer l'écran externe (optirun gnome-display-properties donnerait il quelque chose) ???
Là j'ai emporté son laptop chez moi et je n'ai pas le grand écran sous la main pour tester, je le ferai demain.
Saches aussi que j'habite en Inde, à 8 000 km de chez toi et que donc mon demain ne sera pas à la même heure que le tiens et que, aussi, je te suis très reconnaissant pour toute aide que tu pourrais m'apporter, cher Archange.

Dernière modification par Yogesh (Le 10/12/2011, à 18:02)

ArchangeGabriel · Le 10/12/2011, à 19:54

Normalement, la sortie VGA est forcément reliée à la carte Intel. D'ailleurs, si tu arrives à avoir quelque chose d'affiché, c'est que c'est bien relié à la carte intel, les sorties vidéos de la nVidia n'étant pas utilisables à l'heure actuelle.

Tu devrais peut-être essayer une version plus récente que la 10.10.

linuxsat · Le 10/12/2011, à 20:02

ArchangeGabriel a écrit :

@linuxsat: Bizarre... Tu peux mettre le fichier /var/log/kern.log en entier ?

Le voici pour la journee du 08 ou j'ai fait la manip

Dec  8 08:43:14 apcnb134 kernel: imklog 5.8.1, log source = /proc/kmsg started.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Initializing cgroup subsys cpuset
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Initializing cgroup subsys cpu
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Linux version 3.0.0-13-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=813ab899-0bbe-432d-add9-085791a8c432 ro quiet splash vt.handoff=7
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] KERNEL supported cpus:
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   Intel GenuineIntel
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   AMD AuthenticAMD
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   Centaur CentaurHauls
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] BIOS-provided physical RAM map:
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000040200000 - 00000000baa2a000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000baa2a000 - 00000000baa6e000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000baa6e000 - 00000000badb7000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000badb7000 - 00000000bade7000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000bade7000 - 00000000bafe7000 (ACPI NVS)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000bafe7000 - 00000000bafff000 (ACPI data)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 000000023e000000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] NX (Execute Disable) protection: active
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] DMI 2.6 present.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] DMI: Dell Inc. Latitude E6420/032T9K, BIOS A06 07/11/2011
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] No AGP bridge found
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] last_pfn = 0x23e000 max_arch_pfn = 0x400000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] MTRR default type: uncachable
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] MTRR fixed ranges enabled:
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   00000-9FFFF write-back
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   A0000-BFFFF uncachable
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   C0000-FFFFF write-protect
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] MTRR variable ranges enabled:
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   1 base 080000000 mask FC0000000 write-back
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   3 base 0BB000000 mask FFF000000 uncachable
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   4 base 100000000 mask F00000000 write-back
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   5 base 200000000 mask FC0000000 write-back
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   6 base 23E000000 mask FFE000000 uncachable
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   8 disabled
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   9 disabled
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] found SMP MP-table at [ffff8800000f1a10] f1a10
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] initial memory mapped : 0 - 20000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  0000000000 - 00bb000000 page 2M
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] kernel direct mapping tables up to bb000000 @ badb3000-badb7000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] init_memory_mapping: 0000000100000000-000000023e000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  0100000000 - 023e000000 page 2M
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] kernel direct mapping tables up to 23e000000 @ 23dff6000-23e000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] RAMDISK: 359e4000 - 36cea000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: XSDT 00000000baffde18 0007C (v01 DELL    CBX3    06222004 MSFT 00010013)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: FACP 00000000baf87d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBAFE4E40/0x00000000BAFE4D40, using 32 (20110413/tbfadt-489)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: DSDT 00000000baf6d018 0849C (v02 INT430 SYSFexxx 00001001 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: FACS 00000000bafe4e40 00040
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: APIC 00000000baffcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: TCPA 00000000bafe5d18 00032 (v02                 00000000      00000000)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: SSDT 00000000baf88a98 002F9 (v01 DELLTP      TPM 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: MCFG 00000000bafe5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: HPET 00000000bafe5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: BOOT 00000000bafe5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: SSDT 00000000baf6c018 00990 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: SSDT 00000000baf6b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: DMAR 00000000baf87c18 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: SSDT 00000000baf65018 014A0 (v01 NvdRef  NvdTabl 00001000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] No NUMA configuration found
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Faking a node at 0000000000000000-000000023e000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Initmem setup node 0 0000000000000000-000000023e000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   NODE_DATA [000000023dffb000 - 000000023dffffff]
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880235600000-ffff88023c5fffff] on node 0
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Zone PFN ranges:
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   Normal   0x00100000 -> 0x0023e000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Movable zone start PFN for each node
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] early_node_map[7] active PFN ranges
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x00000010 -> 0x0000009a
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x00000100 -> 0x00020000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x00020200 -> 0x00040000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x00040200 -> 0x000baa2a
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x000baa6e -> 0x000badb7
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x000bafff -> 0x000bb000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     0: 0x00100000 -> 0x0023e000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] On node 0 totalpages: 2066686
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA zone: 5 pages reserved
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA zone: 3917 pages, LIFO batch:0
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA32 zone: 14280 pages used for memmap
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   DMA32 zone: 745900 pages, LIFO batch:31
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   Normal zone: 17808 pages used for memmap
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]   Normal zone: 1284720 pages, LIFO batch:31
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: IRQ0 used by override.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: IRQ2 used by override.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: IRQ9 used by override.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] nr_irqs_gsi: 40
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000baa2a000 - 00000000baa6e000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000badb7000 - 00000000bade7000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000bade7000 - 00000000bafe7000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000bafe7000 - 00000000bafff000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023dc00000 s79616 r8192 d22784 u131072
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] pcpu-alloc: s79616 r8192 d22784 u131072 alloc=1*2097152
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034537
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Policy zone: Normal
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=813ab899-0bbe-432d-add9-085791a8c432 ro quiet splash vt.handoff=7
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Checking aperture...
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] No AGP bridge found
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Queued invalidation will be enabled to support x2apic and Intr-remapping.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Memory: 8051208k/9404416k available (6105k kernel code, 1137672k absent, 215536k reserved, 4879k data, 984k init)
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Hierarchical RCU implementation.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] NR_IRQS:16640 nr_irqs:808 16
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Extended CMOS year: 2000
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] vt handoff: transparent VT on vt#7
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Console: colour dummy device 80x25
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] console [tty0] enabled
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] allocated 67108864 bytes of page_cgroup
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] hpet clockevent registered
Dec  8 08:43:14 apcnb134 kernel: [    0.000000] Fast TSC calibration using PIT
Dec  8 08:43:14 apcnb134 kernel: [    0.004000] Detected 2195.223 MHz processor.
Dec  8 08:43:14 apcnb134 kernel: [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.44 BogoMIPS (lpj=8780892)
Dec  8 08:43:14 apcnb134 kernel: [    0.000007] pid_max: default: 32768 minimum: 301
Dec  8 08:43:14 apcnb134 kernel: [    0.000032] Security Framework initialized
Dec  8 08:43:14 apcnb134 kernel: [    0.000044] AppArmor: AppArmor initialized
Dec  8 08:43:14 apcnb134 kernel: [    0.000046] Yama: becoming mindful.
Dec  8 08:43:14 apcnb134 kernel: [    0.000838] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    0.002708] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    0.003447] Mount-cache hash table entries: 256
Dec  8 08:43:14 apcnb134 kernel: [    0.003551] Initializing cgroup subsys cpuacct
Dec  8 08:43:14 apcnb134 kernel: [    0.003556] Initializing cgroup subsys memory
Dec  8 08:43:14 apcnb134 kernel: [    0.003563] Initializing cgroup subsys devices
Dec  8 08:43:14 apcnb134 kernel: [    0.003565] Initializing cgroup subsys freezer
Dec  8 08:43:14 apcnb134 kernel: [    0.003566] Initializing cgroup subsys net_cls
Dec  8 08:43:14 apcnb134 kernel: [    0.003568] Initializing cgroup subsys blkio
Dec  8 08:43:14 apcnb134 kernel: [    0.003573] Initializing cgroup subsys perf_event
Dec  8 08:43:14 apcnb134 kernel: [    0.003599] CPU: Physical Processor ID: 0
Dec  8 08:43:14 apcnb134 kernel: [    0.003601] CPU: Processor Core ID: 0
Dec  8 08:43:14 apcnb134 kernel: [    0.003606] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Dec  8 08:43:14 apcnb134 kernel: [    0.003607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Dec  8 08:43:14 apcnb134 kernel: [    0.003610] mce: CPU supports 9 MCE banks
Dec  8 08:43:14 apcnb134 kernel: [    0.003624] CPU0: Thermal monitoring enabled (TM1)
Dec  8 08:43:14 apcnb134 kernel: [    0.003633] using mwait in idle threads.
Dec  8 08:43:14 apcnb134 kernel: [    0.006133] ACPI: Core revision 20110413
Dec  8 08:43:14 apcnb134 kernel: [    0.012884] ftrace: allocating 25656 entries in 101 pages
Dec  8 08:43:14 apcnb134 kernel: [    0.022873] DMAR: Host address width 36
Dec  8 08:43:14 apcnb134 kernel: [    0.022876] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
Dec  8 08:43:14 apcnb134 kernel: [    0.022883] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
Dec  8 08:43:14 apcnb134 kernel: [    0.022885] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
Dec  8 08:43:14 apcnb134 kernel: [    0.022890] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
Dec  8 08:43:14 apcnb134 kernel: [    0.022892] DMAR: RMRR base: 0x000000badc6000 end: 0x000000badd5fff
Dec  8 08:43:14 apcnb134 kernel: [    0.022894] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
Dec  8 08:43:14 apcnb134 kernel: [    0.022895] DMAR: No ATSR found
Dec  8 08:43:14 apcnb134 kernel: [    0.022966] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
Dec  8 08:43:14 apcnb134 kernel: [    0.022967] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022968] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022970] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022971] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022972] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022973] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022975] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.022976] HPET id 0 under DRHD base 0xfed91000
Dec  8 08:43:14 apcnb134 kernel: [    0.023162] Enabled IRQ remapping in x2apic mode
Dec  8 08:43:14 apcnb134 kernel: [    0.023163] Enabling x2apic
Dec  8 08:43:14 apcnb134 kernel: [    0.023164] Enabled x2apic
Dec  8 08:43:14 apcnb134 kernel: [    0.023170] Switched APIC routing to cluster x2apic.
Dec  8 08:43:14 apcnb134 kernel: [    0.023544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec  8 08:43:14 apcnb134 kernel: [    0.063189] CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07
Dec  8 08:43:14 apcnb134 kernel: [    0.167767] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
Dec  8 08:43:14 apcnb134 kernel: [    0.167773] ... version:                3
Dec  8 08:43:14 apcnb134 kernel: [    0.167775] ... bit width:              48
Dec  8 08:43:14 apcnb134 kernel: [    0.167776] ... generic registers:      4
Dec  8 08:43:14 apcnb134 kernel: [    0.167777] ... value mask:             0000ffffffffffff
Dec  8 08:43:14 apcnb134 kernel: [    0.167779] ... max period:             000000007fffffff
Dec  8 08:43:14 apcnb134 kernel: [    0.167780] ... fixed-purpose events:   3
Dec  8 08:43:14 apcnb134 kernel: [    0.167781] ... event mask:             000000070000000f
Dec  8 08:43:14 apcnb134 kernel: [    0.168167] Booting Node   0, Processors  #1
Dec  8 08:43:14 apcnb134 kernel: [    0.168169] smpboot cpu 1: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.275811]  #2
Dec  8 08:43:14 apcnb134 kernel: [    0.275813] smpboot cpu 2: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.383648]  #3
Dec  8 08:43:14 apcnb134 kernel: [    0.383650] smpboot cpu 3: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.491583]  #4
Dec  8 08:43:14 apcnb134 kernel: [    0.491585] smpboot cpu 4: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.599438]  #5
Dec  8 08:43:14 apcnb134 kernel: [    0.599440] smpboot cpu 5: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.707281]  #6
Dec  8 08:43:14 apcnb134 kernel: [    0.707283] smpboot cpu 6: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.815216]  #7
Dec  8 08:43:14 apcnb134 kernel: [    0.815218] smpboot cpu 7: start_ip = 95000
Dec  8 08:43:14 apcnb134 kernel: [    0.922990] Brought up 8 CPUs
Dec  8 08:43:14 apcnb134 kernel: [    0.922993] Total of 8 processors activated (35119.31 BogoMIPS).
Dec  8 08:43:14 apcnb134 kernel: [    0.928798] devtmpfs: initialized
Dec  8 08:43:14 apcnb134 kernel: [    0.928925] PM: Registering ACPI NVS region at bade7000 (2097152 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    0.928961] Dell Latitude E6420 series board detected. Selecting PCI-method for reboots.
Dec  8 08:43:14 apcnb134 kernel: [    0.930329] print_constraints: dummy: 
Dec  8 08:43:14 apcnb134 kernel: [    0.930356] Time:  7:43:04  Date: 12/08/11
Dec  8 08:43:14 apcnb134 kernel: [    0.930388] NET: Registered protocol family 16
Dec  8 08:43:14 apcnb134 kernel: [    0.930476] Trying to unpack rootfs image as initramfs...
Dec  8 08:43:14 apcnb134 kernel: [    0.930485] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Dec  8 08:43:14 apcnb134 kernel: [    0.930487] ACPI: bus type pci registered
Dec  8 08:43:14 apcnb134 kernel: [    0.930553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Dec  8 08:43:14 apcnb134 kernel: [    0.930555] PCI: not using MMCONFIG
Dec  8 08:43:14 apcnb134 kernel: [    0.930557] PCI: Using configuration type 1 for base access
Dec  8 08:43:14 apcnb134 kernel: [    0.930564] dmi type 0xB1 record - unknown flag
Dec  8 08:43:14 apcnb134 kernel: [    0.931195] bio: create slab <bio-0> at 0
Dec  8 08:43:14 apcnb134 kernel: [    0.932764] ACPI: EC: Look up EC in DSDT
Dec  8 08:43:14 apcnb134 kernel: [    0.937290] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Dec  8 08:43:14 apcnb134 kernel: [    1.022951] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Dec  8 08:43:14 apcnb134 kernel: [    1.254881] ACPI: SSDT 00000000badd7798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.255273] ACPI: Dynamic OEM Table Load:
Dec  8 08:43:14 apcnb134 kernel: [    1.255275] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.278070] Freeing initrd memory: 19480k freed
Dec  8 08:43:14 apcnb134 kernel: [    1.286791] ACPI: SSDT 00000000badd8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.287212] ACPI: Dynamic OEM Table Load:
Dec  8 08:43:14 apcnb134 kernel: [    1.287214] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.310600] ACPI: SSDT 00000000badd6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.310982] ACPI: Dynamic OEM Table Load:
Dec  8 08:43:14 apcnb134 kernel: [    1.310984] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
Dec  8 08:43:14 apcnb134 kernel: [    1.394464] ACPI: Interpreter enabled
Dec  8 08:43:14 apcnb134 kernel: [    1.394467] ACPI: (supports S0 S3 S4 S5)
Dec  8 08:43:14 apcnb134 kernel: [    1.394489] ACPI: Using IOAPIC for interrupt routing
Dec  8 08:43:14 apcnb134 kernel: [    1.394509] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Dec  8 08:43:14 apcnb134 kernel: [    1.394905] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
Dec  8 08:43:14 apcnb134 kernel: [    2.066332] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
Dec  8 08:43:14 apcnb134 kernel: [    2.066506] ACPI: No dock devices found.
Dec  8 08:43:14 apcnb134 kernel: [    2.066508] HEST: Table not found.
Dec  8 08:43:14 apcnb134 kernel: [    2.066511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Dec  8 08:43:14 apcnb134 kernel: [    2.066814] \_SB_.PCI0:_OSC invalid UUID
Dec  8 08:43:14 apcnb134 kernel: [    2.066815] _OSC request data:1 8 1f 
Dec  8 08:43:14 apcnb134 kernel: [    2.066819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Dec  8 08:43:14 apcnb134 kernel: [    2.067349] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
Dec  8 08:43:14 apcnb134 kernel: [    2.067351] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067353] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067357] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067359] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067369] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
Dec  8 08:43:14 apcnb134 kernel: [    2.067404] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.067429] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.067432] pci 0000:00:01.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.067451] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
Dec  8 08:43:14 apcnb134 kernel: [    2.067461] pci 0000:00:02.0: reg 10: [mem 0xe5400000-0xe57fffff 64bit]
Dec  8 08:43:14 apcnb134 kernel: [    2.067468] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.067473] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
Dec  8 08:43:14 apcnb134 kernel: [    2.067524] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
Dec  8 08:43:14 apcnb134 kernel: [    2.067548] pci 0000:00:16.0: reg 10: [mem 0xe6eb0000-0xe6eb000f 64bit]
Dec  8 08:43:14 apcnb134 kernel: [    2.067612] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.067617] pci 0000:00:16.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.067651] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
Dec  8 08:43:14 apcnb134 kernel: [    2.067670] pci 0000:00:19.0: reg 10: [mem 0xe6e00000-0xe6e1ffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067680] pci 0000:00:19.0: reg 14: [mem 0xe6e80000-0xe6e80fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067689] pci 0000:00:19.0: reg 18: [io  0x5080-0x509f]
Dec  8 08:43:14 apcnb134 kernel: [    2.067740] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.067745] pci 0000:00:19.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.067770] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
Dec  8 08:43:14 apcnb134 kernel: [    2.067792] pci 0000:00:1a.0: reg 10: [mem 0xe6e70000-0xe6e703ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.067868] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.067872] pci 0000:00:1a.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.067898] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
Dec  8 08:43:14 apcnb134 kernel: [    2.067914] pci 0000:00:1b.0: reg 10: [mem 0xe6e60000-0xe6e63fff 64bit]
Dec  8 08:43:14 apcnb134 kernel: [    2.067971] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.067975] pci 0000:00:1b.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068002] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.068102] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068107] pci 0000:00:1c.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068140] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.068239] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068244] pci 0000:00:1c.1: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068278] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.068380] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068385] pci 0000:00:1c.2: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068419] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.068518] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068523] pci 0000:00:1c.3: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068559] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
Dec  8 08:43:14 apcnb134 kernel: [    2.068660] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068665] pci 0000:00:1c.5: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068704] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
Dec  8 08:43:14 apcnb134 kernel: [    2.068726] pci 0000:00:1d.0: reg 10: [mem 0xe6e50000-0xe6e503ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.068802] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.068807] pci 0000:00:1d.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.068832] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
Dec  8 08:43:14 apcnb134 kernel: [    2.068951] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
Dec  8 08:43:14 apcnb134 kernel: [    2.068970] pci 0000:00:1f.2: reg 10: [io  0x50d0-0x50d7]
Dec  8 08:43:14 apcnb134 kernel: [    2.068979] pci 0000:00:1f.2: reg 14: [io  0x50c0-0x50c3]
Dec  8 08:43:14 apcnb134 kernel: [    2.068988] pci 0000:00:1f.2: reg 18: [io  0x50b0-0x50b7]
Dec  8 08:43:14 apcnb134 kernel: [    2.068996] pci 0000:00:1f.2: reg 1c: [io  0x50a0-0x50a3]
Dec  8 08:43:14 apcnb134 kernel: [    2.069005] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
Dec  8 08:43:14 apcnb134 kernel: [    2.069014] pci 0000:00:1f.2: reg 24: [mem 0xe6e40000-0xe6e407ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069048] pci 0000:00:1f.2: PME# supported from D3hot
Dec  8 08:43:14 apcnb134 kernel: [    2.069052] pci 0000:00:1f.2: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.069072] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
Dec  8 08:43:14 apcnb134 kernel: [    2.069089] pci 0000:00:1f.3: reg 10: [mem 0xe6e30000-0xe6e300ff 64bit]
Dec  8 08:43:14 apcnb134 kernel: [    2.069112] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
Dec  8 08:43:14 apcnb134 kernel: [    2.069174] pci 0000:01:00.0: [10de:1056] type 0 class 0x000300
Dec  8 08:43:14 apcnb134 kernel: [    2.069186] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069199] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.069212] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.069222] pci 0000:01:00.0: reg 24: [io  0x4000-0x407f]
Dec  8 08:43:14 apcnb134 kernel: [    2.069231] pci 0000:01:00.0: reg 30: [mem 0xe5000000-0xe507ffff pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.069283] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
Dec  8 08:43:14 apcnb134 kernel: [    2.069295] pci 0000:01:00.1: reg 10: [mem 0xe5080000-0xe5083fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069387] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Dec  8 08:43:14 apcnb134 kernel: [    2.069390] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069392] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe50fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069396] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.069466] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Dec  8 08:43:14 apcnb134 kernel: [    2.069472] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.069478] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.069487] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.069619] pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280
Dec  8 08:43:14 apcnb134 kernel: [    2.069652] pci 0000:03:00.0: reg 10: [mem 0xe6d00000-0xe6d03fff 64bit]
Dec  8 08:43:14 apcnb134 kernel: [    2.069775] pci 0000:03:00.0: supports D1 D2
Dec  8 08:43:14 apcnb134 kernel: [    2.069777] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.069783] pci 0000:03:00.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.069832] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
Dec  8 08:43:14 apcnb134 kernel: [    2.069837] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.069841] pci 0000:00:1c.1:   bridge window [mem 0xe6d00000-0xe6dfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069848] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.069895] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
Dec  8 08:43:14 apcnb134 kernel: [    2.069899] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069904] pci 0000:00:1c.2:   bridge window [mem 0xe6200000-0xe6bfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069910] pci 0000:00:1c.2:   bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.069957] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
Dec  8 08:43:14 apcnb134 kernel: [    2.069961] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069966] pci 0000:00:1c.3:   bridge window [mem 0xe5800000-0xe61fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.069973] pci 0000:00:1c.3:   bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.071788] pci 0000:0b:00.0: [1217:8221] type 0 class 0x000805
Dec  8 08:43:14 apcnb134 kernel: [    2.071832] pci 0000:0b:00.0: reg 10: [mem 0xe6c20000-0xe6c201ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.072095] pci 0000:0b:00.0: supports D1 D2
Dec  8 08:43:14 apcnb134 kernel: [    2.072097] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.072108] pci 0000:0b:00.0: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.072202] pci 0000:0b:00.1: [1217:8231] type 0 class 0x000180
Dec  8 08:43:14 apcnb134 kernel: [    2.072246] pci 0000:0b:00.1: reg 10: [mem 0xe6c10000-0xe6c10fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.072305] pci 0000:0b:00.1: reg 18: [mem 0xe6c00000-0xe6c007ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.072511] pci 0000:0b:00.1: supports D1 D2
Dec  8 08:43:14 apcnb134 kernel: [    2.072512] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
Dec  8 08:43:14 apcnb134 kernel: [    2.072523] pci 0000:0b:00.1: PME# disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.072634] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
Dec  8 08:43:14 apcnb134 kernel: [    2.072638] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.072643] pci 0000:00:1c.5:   bridge window [mem 0xe6c00000-0xe6cfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.072650] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.072679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.072967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Dec  8 08:43:14 apcnb134 kernel: [    2.073040] \_SB_.PCI0:_OSC invalid UUID
Dec  8 08:43:14 apcnb134 kernel: [    2.073041] _OSC request data:1 1f 1f 
Dec  8 08:43:14 apcnb134 kernel: [    2.073045]  pci0000:00: Requesting ACPI _OSC control (0x1d)
Dec  8 08:43:14 apcnb134 kernel: [    2.073074] \_SB_.PCI0:_OSC invalid UUID
Dec  8 08:43:14 apcnb134 kernel: [    2.073075] _OSC request data:1 0 1d 
Dec  8 08:43:14 apcnb134 kernel: [    2.073078]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
Dec  8 08:43:14 apcnb134 kernel: [    2.073080] ACPI _OSC control for PCIe not granted, disabling ASPM
Dec  8 08:43:14 apcnb134 kernel: [    2.076308] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Dec  8 08:43:14 apcnb134 kernel: [    2.076351] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec  8 08:43:14 apcnb134 kernel: [    2.076391] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Dec  8 08:43:14 apcnb134 kernel: [    2.076430] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec  8 08:43:14 apcnb134 kernel: [    2.076469] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Dec  8 08:43:14 apcnb134 kernel: [    2.076508] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Dec  8 08:43:14 apcnb134 kernel: [    2.076548] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
Dec  8 08:43:14 apcnb134 kernel: [    2.076586] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Dec  8 08:43:14 apcnb134 kernel: [    2.076665] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Dec  8 08:43:14 apcnb134 kernel: [    2.076673] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
Dec  8 08:43:14 apcnb134 kernel: [    2.076676] vgaarb: loaded
Dec  8 08:43:14 apcnb134 kernel: [    2.076677] vgaarb: bridge control possible 0000:01:00.0
Dec  8 08:43:14 apcnb134 kernel: [    2.076678] vgaarb: bridge control possible 0000:00:02.0
Dec  8 08:43:14 apcnb134 kernel: [    2.076816] SCSI subsystem initialized
Dec  8 08:43:14 apcnb134 kernel: [    2.076863] libata version 3.00 loaded.
Dec  8 08:43:14 apcnb134 kernel: [    2.076896] usbcore: registered new interface driver usbfs
Dec  8 08:43:14 apcnb134 kernel: [    2.076906] usbcore: registered new interface driver hub
Dec  8 08:43:14 apcnb134 kernel: [    2.076929] usbcore: registered new device driver usb
Dec  8 08:43:14 apcnb134 kernel: [    2.076994] PCI: Using ACPI for IRQ routing
Dec  8 08:43:14 apcnb134 kernel: [    2.078545] PCI: pci_cache_line_size set to 64 bytes
Dec  8 08:43:14 apcnb134 kernel: [    2.078635] reserve RAM buffer: 000000000009a800 - 000000000009ffff 
Dec  8 08:43:14 apcnb134 kernel: [    2.078638] reserve RAM buffer: 00000000baa2a000 - 00000000bbffffff 
Dec  8 08:43:14 apcnb134 kernel: [    2.078640] reserve RAM buffer: 00000000badb7000 - 00000000bbffffff 
Dec  8 08:43:14 apcnb134 kernel: [    2.078643] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff 
Dec  8 08:43:14 apcnb134 kernel: [    2.078645] reserve RAM buffer: 000000023e000000 - 000000023fffffff 
Dec  8 08:43:14 apcnb134 kernel: [    2.078720] NetLabel: Initializing
Dec  8 08:43:14 apcnb134 kernel: [    2.078722] NetLabel:  domain hash size = 128
Dec  8 08:43:14 apcnb134 kernel: [    2.078723] NetLabel:  protocols = UNLABELED CIPSOv4
Dec  8 08:43:14 apcnb134 kernel: [    2.078733] NetLabel:  unlabeled traffic allowed by default
Dec  8 08:43:14 apcnb134 kernel: [    2.078770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Dec  8 08:43:14 apcnb134 kernel: [    2.078776] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Dec  8 08:43:14 apcnb134 kernel: [    2.080790] Switching to clocksource hpet
Dec  8 08:43:14 apcnb134 kernel: [    2.081570] Switched to NOHz mode on CPU #0
Dec  8 08:43:14 apcnb134 kernel: [    2.081636] Switched to NOHz mode on CPU #5
Dec  8 08:43:14 apcnb134 kernel: [    2.081639] Switched to NOHz mode on CPU #2
Dec  8 08:43:14 apcnb134 kernel: [    2.081662] Switched to NOHz mode on CPU #7
Dec  8 08:43:14 apcnb134 kernel: [    2.081666] Switched to NOHz mode on CPU #1
Dec  8 08:43:14 apcnb134 kernel: [    2.081669] Switched to NOHz mode on CPU #4
Dec  8 08:43:14 apcnb134 kernel: [    2.081696] Switched to NOHz mode on CPU #3
Dec  8 08:43:14 apcnb134 kernel: [    2.081701] Switched to NOHz mode on CPU #6
Dec  8 08:43:14 apcnb134 kernel: [    2.085557] AppArmor: AppArmor Filesystem Enabled
Dec  8 08:43:14 apcnb134 kernel: [    2.085576] pnp: PnP ACPI init
Dec  8 08:43:14 apcnb134 kernel: [    2.085587] ACPI: bus type pnp registered
Dec  8 08:43:14 apcnb134 kernel: [    2.085882] pnp 00:00: [bus 00-3e]
Dec  8 08:43:14 apcnb134 kernel: [    2.085885] pnp 00:00: [io  0x0000-0x0cf7 window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085887] pnp 00:00: [io  0x0cf8-0x0cff]
Dec  8 08:43:14 apcnb134 kernel: [    2.085889] pnp 00:00: [io  0x0d00-0xffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085891] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085893] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085894] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085896] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085898] pnp 00:00: [mem 0x000cc000-0x000cffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085900] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085902] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085903] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085905] pnp 00:00: [mem 0x000dc000-0x000dffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085907] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085909] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085911] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085912] pnp 00:00: [mem 0x000ec000-0x000effff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085914] pnp 00:00: [mem 0x000f0000-0x000fffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085916] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085918] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
Dec  8 08:43:14 apcnb134 kernel: [    2.085970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.085983] pnp 00:01: [io  0x0000-0x001f]
Dec  8 08:43:14 apcnb134 kernel: [    2.085985] pnp 00:01: [io  0x0081-0x0091]
Dec  8 08:43:14 apcnb134 kernel: [    2.085986] pnp 00:01: [io  0x0093-0x009f]
Dec  8 08:43:14 apcnb134 kernel: [    2.085988] pnp 00:01: [io  0x00c0-0x00df]
Dec  8 08:43:14 apcnb134 kernel: [    2.085990] pnp 00:01: [dma 4]
Dec  8 08:43:14 apcnb134 kernel: [    2.086008] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086016] pnp 00:02: [mem 0xff000000-0xffffffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.086031] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086098] pnp 00:03: [mem 0xfed00000-0xfed003ff]
Dec  8 08:43:14 apcnb134 kernel: [    2.086131] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086134] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086143] pnp 00:04: [io  0x00f0]
Dec  8 08:43:14 apcnb134 kernel: [    2.086155] pnp 00:04: [irq 13]
Dec  8 08:43:14 apcnb134 kernel: [    2.086177] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086188] pnp 00:05: [io  0x002e-0x002f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086190] pnp 00:05: [io  0x004e-0x004f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086191] pnp 00:05: [io  0x0061]
Dec  8 08:43:14 apcnb134 kernel: [    2.086193] pnp 00:05: [io  0x0063]
Dec  8 08:43:14 apcnb134 kernel: [    2.086194] pnp 00:05: [io  0x0065]
Dec  8 08:43:14 apcnb134 kernel: [    2.086195] pnp 00:05: [io  0x0067]
Dec  8 08:43:14 apcnb134 kernel: [    2.086197] pnp 00:05: [io  0x0070]
Dec  8 08:43:14 apcnb134 kernel: [    2.086198] pnp 00:05: [io  0x0080]
Dec  8 08:43:14 apcnb134 kernel: [    2.086199] pnp 00:05: [io  0x0092]
Dec  8 08:43:14 apcnb134 kernel: [    2.086201] pnp 00:05: [io  0x00b2-0x00b3]
Dec  8 08:43:14 apcnb134 kernel: [    2.086202] pnp 00:05: [io  0x0680-0x069f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086204] pnp 00:05: [io  0x1000-0x100f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086206] pnp 00:05: [io  0xffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.086207] pnp 00:05: [io  0xffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.086208] pnp 00:05: [io  0x0400-0x047f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086210] pnp 00:05: [io  0x0500-0x057f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086211] pnp 00:05: [io  0x164e-0x164f]
Dec  8 08:43:14 apcnb134 kernel: [    2.086245] system 00:05: [io  0x0680-0x069f] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086247] system 00:05: [io  0x1000-0x100f] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086249] system 00:05: [io  0xffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086251] system 00:05: [io  0xffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086253] system 00:05: [io  0x0400-0x047f] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086255] system 00:05: [io  0x0500-0x057f] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086257] system 00:05: [io  0x164e-0x164f] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.086260] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086267] pnp 00:06: [io  0x0070-0x0077]
Dec  8 08:43:14 apcnb134 kernel: [    2.086274] pnp 00:06: [irq 8]
Dec  8 08:43:14 apcnb134 kernel: [    2.086291] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.086300] pnp 00:07: [io  0x0060]
Dec  8 08:43:14 apcnb134 kernel: [    2.086301] pnp 00:07: [io  0x0064]
Dec  8 08:43:14 apcnb134 kernel: [    2.086307] pnp 00:07: [irq 1]
Dec  8 08:43:14 apcnb134 kernel: [    2.086323] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.088854] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.088867] pnp 00:09: [irq 12]
Dec  8 08:43:14 apcnb134 kernel: [    2.088888] pnp 00:09: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.089036] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089038] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089040] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089041] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089043] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089045] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089046] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089050] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089051] pnp 00:0a: [mem 0xff000000-0xffffffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089053] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.089055] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.089057] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.089102] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089104] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089106] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089109] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089111] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089113] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089115] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089118] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089120] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089122] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.089125] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.089153] pnp 00:0b: [irq 23]
Dec  8 08:43:14 apcnb134 kernel: [    2.089182] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.105158] pnp 00:0c: [mem 0x20000000-0x201fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.105160] pnp 00:0c: [mem 0x40000000-0x401fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.105212] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.105215] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
Dec  8 08:43:14 apcnb134 kernel: [    2.105218] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Dec  8 08:43:14 apcnb134 kernel: [    2.105226] pnp: PnP ACPI: found 13 devices
Dec  8 08:43:14 apcnb134 kernel: [    2.105228] ACPI: ACPI bus type pnp unregistered
Dec  8 08:43:14 apcnb134 kernel: [    2.110774] PCI: max bus depth: 1 pci_try_num: 2
Dec  8 08:43:14 apcnb134 kernel: [    2.110820] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Dec  8 08:43:14 apcnb134 kernel: [    2.110822] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110825] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe50fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110828] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.110832] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Dec  8 08:43:14 apcnb134 kernel: [    2.110834] pci 0000:00:1c.0:   bridge window [io  disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110839] pci 0000:00:1c.0:   bridge window [mem disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110844] pci 0000:00:1c.0:   bridge window [mem pref disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110850] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
Dec  8 08:43:14 apcnb134 kernel: [    2.110852] pci 0000:00:1c.1:   bridge window [io  disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110858] pci 0000:00:1c.1:   bridge window [mem 0xe6d00000-0xe6dfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110862] pci 0000:00:1c.1:   bridge window [mem pref disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110869] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
Dec  8 08:43:14 apcnb134 kernel: [    2.110872] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110878] pci 0000:00:1c.2:   bridge window [mem 0xe6200000-0xe6bfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110883] pci 0000:00:1c.2:   bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.110889] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
Dec  8 08:43:14 apcnb134 kernel: [    2.110893] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110898] pci 0000:00:1c.3:   bridge window [mem 0xe5800000-0xe61fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110903] pci 0000:00:1c.3:   bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.110910] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
Dec  8 08:43:14 apcnb134 kernel: [    2.110912] pci 0000:00:1c.5:   bridge window [io  disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110917] pci 0000:00:1c.5:   bridge window [mem 0xe6c00000-0xe6cfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.110922] pci 0000:00:1c.5:   bridge window [mem pref disabled]
Dec  8 08:43:14 apcnb134 kernel: [    2.110940] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [    2.110943] pci 0000:00:01.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.110951] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [    2.110955] pci 0000:00:1c.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.110967] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [    2.110971] pci 0000:00:1c.1: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.110983] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec  8 08:43:14 apcnb134 kernel: [    2.110988] pci 0000:00:1c.2: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.110999] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Dec  8 08:43:14 apcnb134 kernel: [    2.111004] pci 0000:00:1c.3: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.111011] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [    2.111015] pci 0000:00:1c.5: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.111020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
Dec  8 08:43:14 apcnb134 kernel: [    2.111022] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111026] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111028] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111030] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111031] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111033] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.111036] pci_bus 0000:03: resource 1 [mem 0xe6d00000-0xe6dfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111038] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111040] pci_bus 0000:04: resource 1 [mem 0xe6200000-0xe6bfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111042] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.111044] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111046] pci_bus 0000:0a: resource 1 [mem 0xe5800000-0xe61fffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111048] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
Dec  8 08:43:14 apcnb134 kernel: [    2.111050] pci_bus 0000:0b: resource 1 [mem 0xe6c00000-0xe6cfffff]
Dec  8 08:43:14 apcnb134 kernel: [    2.111077] NET: Registered protocol family 2
Dec  8 08:43:14 apcnb134 kernel: [    2.111305] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.112255] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.113597] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.113728] TCP: Hash tables configured (established 524288 bind 65536)
Dec  8 08:43:14 apcnb134 kernel: [    2.113730] TCP reno registered
Dec  8 08:43:14 apcnb134 kernel: [    2.113746] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.113782] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.113898] NET: Registered protocol family 1
Dec  8 08:43:14 apcnb134 kernel: [    2.113912] pci 0000:00:02.0: Boot video device
Dec  8 08:43:14 apcnb134 kernel: [    2.114037] PCI: CLS 64 bytes, default 64
Dec  8 08:43:14 apcnb134 kernel: [    2.114042] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Dec  8 08:43:14 apcnb134 kernel: [    2.114044] Placing 64MB software IO TLB between ffff8800b6a2a000 - ffff8800baa2a000
Dec  8 08:43:14 apcnb134 kernel: [    2.114046] software IO TLB at phys 0xb6a2a000 - 0xbaa2a000
Dec  8 08:43:14 apcnb134 kernel: [    2.114065] Simple Boot Flag at 0xf3 set to 0x1
Dec  8 08:43:14 apcnb134 kernel: [    2.114599] audit: initializing netlink socket (disabled)
Dec  8 08:43:14 apcnb134 kernel: [    2.114606] type=2000 audit(1323330184.888:1): initialized
Dec  8 08:43:14 apcnb134 kernel: [    2.143686] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Dec  8 08:43:14 apcnb134 kernel: [    2.161775] VFS: Disk quotas dquot_6.5.2
Dec  8 08:43:14 apcnb134 kernel: [    2.161830] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec  8 08:43:14 apcnb134 kernel: [    2.162325] fuse init (API version 7.16)
Dec  8 08:43:14 apcnb134 kernel: [    2.162395] msgmni has been set to 15763
Dec  8 08:43:14 apcnb134 kernel: [    2.162743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Dec  8 08:43:14 apcnb134 kernel: [    2.162773] io scheduler noop registered
Dec  8 08:43:14 apcnb134 kernel: [    2.162775] io scheduler deadline registered
Dec  8 08:43:14 apcnb134 kernel: [    2.162806] io scheduler cfq registered (default)
Dec  8 08:43:14 apcnb134 kernel: [    2.162888] pcieport 0000:00:01.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.162918] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
Dec  8 08:43:14 apcnb134 kernel: [    2.163179] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec  8 08:43:14 apcnb134 kernel: [    2.163198] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Dec  8 08:43:14 apcnb134 kernel: [    2.163227] intel_idle: MWAIT substates: 0x21120
Dec  8 08:43:14 apcnb134 kernel: [    2.163229] intel_idle: v0.4 model 0x2A
Dec  8 08:43:14 apcnb134 kernel: [    2.163230] intel_idle: lapic_timer_reliable_states 0xffffffff
Dec  8 08:43:14 apcnb134 kernel: [    2.163609] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Dec  8 08:43:14 apcnb134 kernel: [    2.163893] ACPI: AC Adapter [AC] (on-line)
Dec  8 08:43:14 apcnb134 kernel: [    2.164026] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Dec  8 08:43:14 apcnb134 kernel: [    2.164561] ACPI: Lid Switch [LID]
Dec  8 08:43:14 apcnb134 kernel: [    2.164793] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Dec  8 08:43:14 apcnb134 kernel: [    2.164797] ACPI: Power Button [PBTN]
Dec  8 08:43:14 apcnb134 kernel: [    2.164825] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Dec  8 08:43:14 apcnb134 kernel: [    2.164828] ACPI: Sleep Button [SBTN]
Dec  8 08:43:14 apcnb134 kernel: [    2.164856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Dec  8 08:43:14 apcnb134 kernel: [    2.164858] ACPI: Power Button [PWRF]
Dec  8 08:43:14 apcnb134 kernel: [    2.164881] ACPI: acpi_idle yielding to intel_idle
Dec  8 08:43:14 apcnb134 kernel: [    2.360682] thermal LNXTHERM:00: registered as thermal_zone0
Dec  8 08:43:14 apcnb134 kernel: [    2.360684] ACPI: Thermal Zone [THM] (25 C)
Dec  8 08:43:14 apcnb134 kernel: [    2.360705] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Dec  8 08:43:14 apcnb134 kernel: [    2.360715] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Dec  8 08:43:14 apcnb134 kernel: [    2.360747] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Dec  8 08:43:14 apcnb134 kernel: [    2.360761] ERST: Table is not found!
Dec  8 08:43:14 apcnb134 kernel: [    2.360808] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Dec  8 08:43:14 apcnb134 kernel: [    2.696139] ACPI Error: [EABF] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dswload2-316)
Dec  8 08:43:14 apcnb134 kernel: [    2.696145] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110413/psloop-231)
Dec  8 08:43:14 apcnb134 kernel: [    2.696149] ACPI Error: Method parse/execution failed [\_SB_.EEAC] (Node ffff880230c5a668), AE_ALREADY_EXISTS (20110413/psparse-536)
Dec  8 08:43:14 apcnb134 kernel: [    2.696157] ACPI: Marking method EEAC as Serialized because of AE_ALREADY_EXISTS error
Dec  8 08:43:14 apcnb134 kernel: [    2.696161] ACPI Error: Method parse/execution failed [\_SB_.BAT2._STA] (Node ffff880230c5ac58), AE_ALREADY_EXISTS (20110413/psparse-536)
Dec  8 08:43:14 apcnb134 kernel: [    2.696166] ACPI: Marking method _STA as Serialized because of AE_ALREADY_EXISTS error
Dec  8 08:43:14 apcnb134 kernel: [    2.696172] ACPI Exception: AE_ERROR, Evaluating _STA (20110413/battery-396)
Dec  8 08:43:14 apcnb134 kernel: [    2.696175] ACPI: Battery Slot [BAT2] (battery absent)
Dec  8 08:43:14 apcnb134 kernel: [    2.697229] ACPI: Battery Slot [BAT1] (battery absent)
Dec  8 08:43:14 apcnb134 kernel: [    2.705412] ACPI: Battery Slot [BAT0] (battery present)
Dec  8 08:43:14 apcnb134 kernel: [    2.736279] Linux agpgart interface v0.103
Dec  8 08:43:14 apcnb134 kernel: [    2.736357] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
Dec  8 08:43:14 apcnb134 kernel: [    2.736503] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Dec  8 08:43:14 apcnb134 kernel: [    2.737950] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
Dec  8 08:43:14 apcnb134 kernel: [    2.738053] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Dec  8 08:43:14 apcnb134 kernel: [    2.738894] brd: module loaded
Dec  8 08:43:14 apcnb134 kernel: [    2.739271] loop: module loaded
Dec  8 08:43:14 apcnb134 kernel: [    2.739592] Fixed MDIO Bus: probed
Dec  8 08:43:14 apcnb134 kernel: [    2.739608] PPP generic driver version 2.4.2
Dec  8 08:43:14 apcnb134 kernel: [    2.739640] tun: Universal TUN/TAP device driver, 1.6
Dec  8 08:43:14 apcnb134 kernel: [    2.739641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec  8 08:43:14 apcnb134 kernel: [    2.739697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec  8 08:43:14 apcnb134 kernel: [    2.739714] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [    2.739730] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.739734] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Dec  8 08:43:14 apcnb134 kernel: [    2.739758] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Dec  8 08:43:14 apcnb134 kernel: [    2.739783] ehci_hcd 0000:00:1a.0: debug port 2
Dec  8 08:43:14 apcnb134 kernel: [    2.743654] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
Dec  8 08:43:14 apcnb134 kernel: [    2.743671] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6e70000
Dec  8 08:43:14 apcnb134 kernel: [    2.755971] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Dec  8 08:43:14 apcnb134 kernel: [    2.756101] hub 1-0:1.0: USB hub found
Dec  8 08:43:14 apcnb134 kernel: [    2.756105] hub 1-0:1.0: 2 ports detected
Dec  8 08:43:14 apcnb134 kernel: [    2.756155] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [    2.756167] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.756171] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Dec  8 08:43:14 apcnb134 kernel: [    2.756199] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Dec  8 08:43:14 apcnb134 kernel: [    2.756220] ehci_hcd 0000:00:1d.0: debug port 2
Dec  8 08:43:14 apcnb134 kernel: [    2.760086] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
Dec  8 08:43:14 apcnb134 kernel: [    2.760097] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe6e50000
Dec  8 08:43:14 apcnb134 kernel: [    2.775953] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Dec  8 08:43:14 apcnb134 kernel: [    2.776068] hub 2-0:1.0: USB hub found
Dec  8 08:43:14 apcnb134 kernel: [    2.776072] hub 2-0:1.0: 2 ports detected
Dec  8 08:43:14 apcnb134 kernel: [    2.776115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec  8 08:43:14 apcnb134 kernel: [    2.776126] uhci_hcd: USB Universal Host Controller Interface driver
Dec  8 08:43:14 apcnb134 kernel: [    2.776171] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Dec  8 08:43:14 apcnb134 kernel: [    2.776372] i8042: Warning: Keylock active
Dec  8 08:43:14 apcnb134 kernel: [    2.777600] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec  8 08:43:14 apcnb134 kernel: [    2.777606] serio: i8042 AUX port at 0x60,0x64 irq 12
Dec  8 08:43:14 apcnb134 kernel: [    2.777708] mousedev: PS/2 mouse device common for all mice
Dec  8 08:43:14 apcnb134 kernel: [    2.777826] rtc_cmos 00:06: RTC can wake from S4
Dec  8 08:43:14 apcnb134 kernel: [    2.777933] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Dec  8 08:43:14 apcnb134 kernel: [    2.777959] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
Dec  8 08:43:14 apcnb134 kernel: [    2.778054] device-mapper: uevent: version 1.0.3
Dec  8 08:43:14 apcnb134 kernel: [    2.778118] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Dec  8 08:43:14 apcnb134 kernel: [    2.778310] cpuidle: using governor ladder
Dec  8 08:43:14 apcnb134 kernel: [    2.778538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Dec  8 08:43:14 apcnb134 kernel: [    2.778763] cpuidle: using governor menu
Dec  8 08:43:14 apcnb134 kernel: [    2.778765] EFI Variables Facility v0.08 2004-May-17
Dec  8 08:43:14 apcnb134 kernel: [    2.778940] TCP cubic registered
Dec  8 08:43:14 apcnb134 kernel: [    2.779034] NET: Registered protocol family 10
Dec  8 08:43:14 apcnb134 kernel: [    2.779412] NET: Registered protocol family 17
Dec  8 08:43:14 apcnb134 kernel: [    2.779423] Registering the dns_resolver key type
Dec  8 08:43:14 apcnb134 kernel: [    2.779496] PM: Hibernation image not present or could not be loaded.
Dec  8 08:43:14 apcnb134 kernel: [    2.779504] registered taskstats version 1
Dec  8 08:43:14 apcnb134 kernel: [    2.793841]   Magic number: 7:63:723
Dec  8 08:43:14 apcnb134 kernel: [    2.793850] block loop3: hash matches
Dec  8 08:43:14 apcnb134 kernel: [    2.793947] rtc_cmos 00:06: setting system clock to 2011-12-08 07:43:06 UTC (1323330186)
Dec  8 08:43:14 apcnb134 kernel: [    2.794411] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
Dec  8 08:43:14 apcnb134 kernel: [    2.794414] [Firmware Bug]: BIOS needs update for CPU frequency support
Dec  8 08:43:14 apcnb134 kernel: [    2.794419] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Dec  8 08:43:14 apcnb134 kernel: [    2.794420] EDD information not available.
Dec  8 08:43:14 apcnb134 kernel: [    2.795933] Freeing unused kernel memory: 984k freed
Dec  8 08:43:14 apcnb134 kernel: [    2.796050] Write protecting the kernel read-only data: 10240k
Dec  8 08:43:14 apcnb134 kernel: [    2.796396] Freeing unused kernel memory: 20k freed
Dec  8 08:43:14 apcnb134 kernel: [    2.800318] Freeing unused kernel memory: 1396k freed
Dec  8 08:43:14 apcnb134 kernel: [    2.838175] wmi: Mapper loaded
Dec  8 08:43:14 apcnb134 kernel: [    2.840531] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
Dec  8 08:43:14 apcnb134 kernel: [    2.840535] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
Dec  8 08:43:14 apcnb134 kernel: [    2.840580] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Dec  8 08:43:14 apcnb134 kernel: [    2.840593] e1000e 0000:00:19.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.840752] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Dec  8 08:43:14 apcnb134 kernel: [    2.842157] [drm] Initialized drm 1.1.0 20060810
Dec  8 08:43:14 apcnb134 kernel: [    2.842710] sdhci: Secure Digital Host Controller Interface driver
Dec  8 08:43:14 apcnb134 kernel: [    2.842713] sdhci: Copyright(c) Pierre Ossman
Dec  8 08:43:14 apcnb134 kernel: [    2.843000] sdhci-pci 0000:0b:00.0: SDHCI controller found [1217:8221] (rev 5)
Dec  8 08:43:14 apcnb134 kernel: [    2.843022] sdhci-pci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [    2.843054] sdhci-pci 0000:0b:00.0: Invalid iomem size. You may experience problems.
Dec  8 08:43:14 apcnb134 kernel: [    2.843096] sdhci-pci 0000:0b:00.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.843109] mmc0: no vmmc regulator found
Dec  8 08:43:14 apcnb134 kernel: [    2.843148] Registered led device: mmc0::
Dec  8 08:43:14 apcnb134 kernel: [    2.843198] mmc0: SDHCI controller on PCI [0000:0b:00.0] using DMA
Dec  8 08:43:14 apcnb134 kernel: [    2.872707] nouveau 0000:01:00.0: power state changed by ACPI to D0
Dec  8 08:43:14 apcnb134 kernel: [    2.872713] nouveau 0000:01:00.0: power state changed by ACPI to D0
Dec  8 08:43:14 apcnb134 kernel: [    2.872717] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
Dec  8 08:43:14 apcnb134 kernel: [    2.872723] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [    2.872727] nouveau 0000:01:00.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    2.874876] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0d9160a1
Dec  8 08:43:14 apcnb134 kernel: [    2.875960] nouveau 0000:01:00.0: PCI INT A disabled
Dec  8 08:43:14 apcnb134 kernel: [    2.875964] nouveau: probe of 0000:01:00.0 failed with error -22
Dec  8 08:43:14 apcnb134 kernel: [    3.067717] usb 1-1: new high speed USB device number 2 using ehci_hcd
Dec  8 08:43:14 apcnb134 kernel: [    3.111584] Refined TSC clocksource calibration: 2195.013 MHz.
Dec  8 08:43:14 apcnb134 kernel: [    3.111590] Switching to clocksource tsc
Dec  8 08:43:14 apcnb134 kernel: [    3.145179] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:84:2e:f6
Dec  8 08:43:14 apcnb134 kernel: [    3.145183] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Dec  8 08:43:14 apcnb134 kernel: [    3.145222] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 3041FF-0FF
Dec  8 08:43:14 apcnb134 kernel: [    3.145271] ahci 0000:00:1f.2: version 3.0
Dec  8 08:43:14 apcnb134 kernel: [    3.145286] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec  8 08:43:14 apcnb134 kernel: [    3.145379] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
Dec  8 08:43:14 apcnb134 kernel: [    3.145412] ahci: SSS flag set, parallel bus scan disabled
Dec  8 08:43:14 apcnb134 kernel: [    3.159633] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
Dec  8 08:43:14 apcnb134 kernel: [    3.159638] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
Dec  8 08:43:14 apcnb134 kernel: [    3.159644] ahci 0000:00:1f.2: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    3.192087] scsi0 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192256] scsi1 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192388] scsi2 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192520] scsi3 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192655] scsi4 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192785] scsi5 : ahci
Dec  8 08:43:14 apcnb134 kernel: [    3.192841] ata1: SATA max UDMA/133 abar m2048@0xe6e40000 port 0xe6e40100 irq 44
Dec  8 08:43:14 apcnb134 kernel: [    3.192845] ata2: SATA max UDMA/133 abar m2048@0xe6e40000 port 0xe6e40180 irq 44
Dec  8 08:43:14 apcnb134 kernel: [    3.192847] ata3: DUMMY
Dec  8 08:43:14 apcnb134 kernel: [    3.192849] ata4: SATA max UDMA/133 abar m2048@0xe6e40000 port 0xe6e40280 irq 44
Dec  8 08:43:14 apcnb134 kernel: [    3.192853] ata5: SATA max UDMA/133 abar m2048@0xe6e40000 port 0xe6e40300 irq 44
Dec  8 08:43:14 apcnb134 kernel: [    3.192856] ata6: SATA max UDMA/133 abar m2048@0xe6e40000 port 0xe6e40380 irq 44
Dec  8 08:43:14 apcnb134 kernel: [    3.192889] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [    3.192894] i915 0000:00:02.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [    3.200151] hub 1-1:1.0: USB hub found
Dec  8 08:43:14 apcnb134 kernel: [    3.200241] hub 1-1:1.0: 6 ports detected
Dec  8 08:43:14 apcnb134 kernel: [    3.263146] i915 0000:00:02.0: irq 45 for MSI/MSI-X
Dec  8 08:43:14 apcnb134 kernel: [    3.263152] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Dec  8 08:43:14 apcnb134 kernel: [    3.263153] [drm] Driver supports precise vblank timestamp query.
Dec  8 08:43:14 apcnb134 kernel: [    3.263320] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
Dec  8 08:43:14 apcnb134 kernel: [    3.263334] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
Dec  8 08:43:14 apcnb134 kernel: [    3.263337] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
Dec  8 08:43:14 apcnb134 kernel: [    3.311365] usb 2-1: new high speed USB device number 2 using ehci_hcd
Dec  8 08:43:14 apcnb134 kernel: [    3.443896] hub 2-1:1.0: USB hub found
Dec  8 08:43:14 apcnb134 kernel: [    3.443976] hub 2-1:1.0: 8 ports detected
Dec  8 08:43:14 apcnb134 kernel: [    3.466513] fbcon: inteldrmfb (fb0) is primary device
Dec  8 08:43:14 apcnb134 kernel: [    3.466554] Console: switching to colour frame buffer device 200x56
Dec  8 08:43:14 apcnb134 kernel: [    3.466578] fb0: inteldrmfb frame buffer device
Dec  8 08:43:14 apcnb134 kernel: [    3.466580] drm: registered panic notifier
Dec  8 08:43:14 apcnb134 kernel: [    3.511172] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec  8 08:43:14 apcnb134 kernel: [    3.512867] ata1.00: ATA-8: WDC WD5000BPKT-75PK4T0, 01.01A01, max UDMA/133
Dec  8 08:43:14 apcnb134 kernel: [    3.512876] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec  8 08:43:14 apcnb134 kernel: [    3.514573] ata1.00: configured for UDMA/133
Dec  8 08:43:14 apcnb134 kernel: [    3.514716] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPKT-7 01.0 PQ: 0 ANSI: 5
Dec  8 08:43:14 apcnb134 kernel: [    3.514830] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec  8 08:43:14 apcnb134 kernel: [    3.514909] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Dec  8 08:43:14 apcnb134 kernel: [    3.514912] sd 0:0:0:0: [sda] 4096-byte physical blocks
Dec  8 08:43:14 apcnb134 kernel: [    3.514945] sd 0:0:0:0: [sda] Write Protect is off
Dec  8 08:43:14 apcnb134 kernel: [    3.514948] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec  8 08:43:14 apcnb134 kernel: [    3.514962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec  8 08:43:14 apcnb134 kernel: [    3.515315] usb 1-1.5: new high speed USB device number 3 using ehci_hcd
Dec  8 08:43:14 apcnb134 kernel: [    3.642441]  sda: sda1 sda2 < sda5 >
Dec  8 08:43:14 apcnb134 kernel: [    3.642706] sd 0:0:0:0: [sda] Attached SCSI disk
Dec  8 08:43:14 apcnb134 kernel: [    3.715094] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
Dec  8 08:43:14 apcnb134 kernel: [    3.830834] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec  8 08:43:14 apcnb134 kernel: [    3.834477] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU40N, A104, max UDMA/133
Dec  8 08:43:14 apcnb134 kernel: [    3.838448] ata2.00: configured for UDMA/133
Dec  8 08:43:14 apcnb134 kernel: [    3.841505] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU40N    A104 PQ: 0 ANSI: 5
Dec  8 08:43:14 apcnb134 kernel: [    3.845526] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Dec  8 08:43:14 apcnb134 kernel: [    3.845535] cdrom: Uniform CD-ROM driver Revision: 3.20
Dec  8 08:43:14 apcnb134 kernel: [    3.845636] sr 1:0:0:0: Attached scsi CD-ROM sr0
Dec  8 08:43:14 apcnb134 kernel: [    3.845683] sr 1:0:0:0: Attached scsi generic sg1 type 5
Dec  8 08:43:14 apcnb134 kernel: [    3.882909] usb 2-1.8: new full speed USB device number 4 using ehci_hcd
Dec  8 08:43:14 apcnb134 kernel: [    3.997607] usb 2-1.8: config 0 descriptor??
Dec  8 08:43:14 apcnb134 kernel: [    4.162463] ata4: SATA link down (SStatus 0 SControl 300)
Dec  8 08:43:14 apcnb134 kernel: [    4.290890] acpi device:16: registered as cooling_device8
Dec  8 08:43:14 apcnb134 kernel: [    4.359062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input5
Dec  8 08:43:14 apcnb134 kernel: [    4.359098] ACPI: Video Device [VID] (multi-head: yes  rom: yes  post: no)
Dec  8 08:43:14 apcnb134 kernel: [    4.482108] ata5: SATA link down (SStatus 0 SControl 300)
Dec  8 08:43:14 apcnb134 kernel: [    4.562598] acpi device:3d: registered as cooling_device9
Dec  8 08:43:14 apcnb134 kernel: [    4.634045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
Dec  8 08:43:14 apcnb134 kernel: [    4.634076] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Dec  8 08:43:14 apcnb134 kernel: [    4.634097] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Dec  8 08:43:14 apcnb134 kernel: [    4.801757] ata6: SATA link down (SStatus 0 SControl 300)
Dec  8 08:43:14 apcnb134 kernel: [    4.804348] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
Dec  8 08:43:14 apcnb134 kernel: [    4.804495] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
Dec  8 08:43:14 apcnb134 kernel: [    4.804517] usbcore: registered new interface driver usbhid
Dec  8 08:43:14 apcnb134 kernel: [    4.804519] usbhid: USB HID core driver
Dec  8 08:43:14 apcnb134 kernel: [    5.738483] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Dec  8 08:43:14 apcnb134 kernel: [   10.619840] mei: module is from the staging directory, the quality is unknown, you have been warned.
Dec  8 08:43:14 apcnb134 kernel: [   10.620216] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 08:43:14 apcnb134 kernel: [   10.620225] mei 0000:00:16.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [   10.623455] lp: driver loaded but no devices found
Dec  8 08:43:14 apcnb134 kernel: [   10.624811] cfg80211: Calling CRDA to update world regulatory domain
Dec  8 08:43:14 apcnb134 kernel: [   10.630733] brcmutil: module is from the staging directory, the quality is unknown, you have been warned.
Dec  8 08:43:14 apcnb134 kernel: [   10.631675] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
Dec  8 08:43:14 apcnb134 kernel: [   10.634436] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 10
Dec  8 08:43:14 apcnb134 kernel: [   10.634458] brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [   10.634467] brcmsmac 0000:03:00.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [   10.649308] parport_pc 00:08: [io  0x0378-0x037b]
Dec  8 08:43:14 apcnb134 kernel: [   10.649383] parport_pc 00:08: [irq 5]
Dec  8 08:43:14 apcnb134 kernel: [   10.660143] Linux video capture interface: v2.00
Dec  8 08:43:14 apcnb134 kernel: [   10.660777] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:181c)
Dec  8 08:43:14 apcnb134 kernel: [   10.663187] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
Dec  8 08:43:14 apcnb134 kernel: [   10.663322] usbcore: registered new interface driver uvcvideo
Dec  8 08:43:14 apcnb134 kernel: [   10.663325] USB Video Class driver (v1.1.0)
Dec  8 08:43:14 apcnb134 kernel: [   10.678455] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Dec  8 08:43:14 apcnb134 kernel: [   10.679637] type=1400 audit(1323330194.391:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=454 comm="apparmor_parser"
Dec  8 08:43:14 apcnb134 kernel: [   10.679990] type=1400 audit(1323330194.391:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=454 comm="apparmor_parser"
Dec  8 08:43:14 apcnb134 kernel: [   10.680256] type=1400 audit(1323330194.391:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=454 comm="apparmor_parser"
Dec  8 08:43:14 apcnb134 kernel: [   10.707053] input: Dell WMI hotkeys as /devices/virtual/input/input9
Dec  8 08:43:14 apcnb134 kernel: [   10.708669] Adding 8342524k swap on /dev/sda5.  Priority:-1 extents:1 across:8342524k 
Dec  8 08:43:14 apcnb134 kernel: [   10.713294] cfg80211: World regulatory domain updated:
Dec  8 08:43:14 apcnb134 kernel: [   10.713298] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Dec  8 08:43:14 apcnb134 kernel: [   10.713302] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.713306] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.713309] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.713312] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.713315] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.713666] ppdev: user-space parallel port driver
Dec  8 08:43:14 apcnb134 kernel: [   10.723509] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Dec  8 08:43:14 apcnb134 kernel: [   10.723589] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Dec  8 08:43:14 apcnb134 kernel: [   10.723613] HDA Intel 0000:00:1b.0: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [   10.766550] hda_codec: connection list not available for 0xf
Dec  8 08:43:14 apcnb134 kernel: [   10.775846] input: HDA Intel PCH Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Dec  8 08:43:14 apcnb134 kernel: [   10.775927] input: HDA Intel PCH Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Dec  8 08:43:14 apcnb134 kernel: [   10.775984] input: HDA Intel PCH Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Dec  8 08:43:14 apcnb134 kernel: [   10.776035] input: HDA Intel PCH HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Dec  8 08:43:14 apcnb134 kernel: [   10.776181] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec  8 08:43:14 apcnb134 kernel: [   10.776184] hda_intel: Disabling MSI
Dec  8 08:43:14 apcnb134 kernel: [   10.776217] HDA Intel 0000:01:00.1: setting latency timer to 64
Dec  8 08:43:14 apcnb134 kernel: [   10.776221] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776225] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776227] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776230] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776232] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776234] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776236] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776238] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776240] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776242] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776244] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776246] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776248] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776250] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776252] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776254] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776256] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776258] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776260] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776263] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776264] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776267] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776268] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776271] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776272] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776275] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.776277] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.776279] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.778257] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Dec  8 08:43:14 apcnb134 kernel: [   10.779470] lib80211: common routines for IEEE802.11 drivers
Dec  8 08:43:14 apcnb134 kernel: [   10.779474] lib80211_crypt: registered algorithm 'NULL'
Dec  8 08:43:14 apcnb134 kernel: [   10.781154] wl: module license 'MIXED/Proprietary' taints kernel.
Dec  8 08:43:14 apcnb134 kernel: [   10.781157] Disabling lock debugging due to kernel taint
Dec  8 08:43:14 apcnb134 kernel: [   10.784696] cfg80211: Calling CRDA for country: US
Dec  8 08:43:14 apcnb134 kernel: [   10.787335] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787339] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787341] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787343] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787345] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787347] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787349] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787352] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787353] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787356] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787358] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787360] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787362] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787364] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787366] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787368] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787370] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787372] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787374] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787376] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787378] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Dec  8 08:43:14 apcnb134 kernel: [   10.787380] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787382] cfg80211: Disabling freq 2467 MHz
Dec  8 08:43:14 apcnb134 kernel: [   10.787383] cfg80211: Disabling freq 2472 MHz
Dec  8 08:43:14 apcnb134 kernel: [   10.787385] cfg80211: Disabling freq 2484 MHz
Dec  8 08:43:14 apcnb134 kernel: [   10.787387] cfg80211: Regulatory domain changed to country: US
Dec  8 08:43:14 apcnb134 kernel: [   10.787389] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Dec  8 08:43:14 apcnb134 kernel: [   10.787391] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787393] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787395] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787397] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787399] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.787401] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Dec  8 08:43:14 apcnb134 kernel: [   10.927119] parport_pc 00:08: activated
Dec  8 08:43:14 apcnb134 kernel: [   10.927125] parport_pc 00:08: reported by Plug and Play ACPI
Dec  8 08:43:14 apcnb134 kernel: [   10.927208] parport_pc 00:08: disabled
Dec  8 08:43:14 apcnb134 kernel: [   10.943428] alps.c: Enabled hardware quirk, falling back to psmouse-core
Dec  8 08:43:14 apcnb134 kernel: [   10.956362] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input14
Dec  8 08:43:14 apcnb134 kernel: [   11.143533] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Dec  8 08:43:14 apcnb134 kernel: [   11.222660] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
Dec  8 08:43:14 apcnb134 kernel: [   11.246661] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
Dec  8 08:43:14 apcnb134 kernel: [   11.270710] HDMI status: Pin=7 Presence_Detect=0 ELD_Valid=0
Dec  8 08:43:15 apcnb134 kernel: [   11.286683] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
Dec  8 08:43:15 apcnb134 kernel: [   11.286786] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
Dec  8 08:43:15 apcnb134 kernel: [   11.286870] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
Dec  8 08:43:15 apcnb134 kernel: [   11.398624] type=1400 audit(1323330195.111:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=983 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.398811] type=1400 audit(1323330195.111:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=982 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.398886] type=1400 audit(1323330195.111:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=983 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.398941] type=1400 audit(1323330195.111:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=984 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.399039] type=1400 audit(1323330195.111:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=979 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.399084] type=1400 audit(1323330195.111:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=982 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.399476] type=1400 audit(1323330195.111:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=979 comm="apparmor_parser"
Dec  8 08:43:15 apcnb134 kernel: [   11.501068] init: failsafe main process (887) killed by TERM signal
Dec  8 08:43:15 apcnb134 kernel: [   11.501942] init: apport pre-start process (1015) terminated with status 1
Dec  8 08:43:15 apcnb134 kernel: [   11.511333] init: apport post-stop process (1052) terminated with status 1
Dec  8 08:43:15 apcnb134 kernel: [   11.546446] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Dec  8 08:43:15 apcnb134 kernel: [   11.602299] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Dec  8 08:43:15 apcnb134 kernel: [   11.602908] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec  8 08:43:15 apcnb134 kernel: [   11.733284] Bluetooth: Core ver 2.16
Dec  8 08:43:15 apcnb134 kernel: [   11.733305] NET: Registered protocol family 31
Dec  8 08:43:15 apcnb134 kernel: [   11.733307] Bluetooth: HCI device and connection manager initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.733309] Bluetooth: HCI socket layer initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.733312] Bluetooth: L2CAP socket layer initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.733348] Bluetooth: SCO socket layer initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.735274] Bluetooth: RFCOMM TTY layer initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.735280] Bluetooth: RFCOMM socket layer initialized
Dec  8 08:43:15 apcnb134 kernel: [   11.735282] Bluetooth: RFCOMM ver 1.11
Dec  8 08:43:15 apcnb134 kernel: [   11.735517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Dec  8 08:43:15 apcnb134 kernel: [   11.735521] Bluetooth: BNEP filters: protocol multicast
Dec  8 08:43:15 apcnb134 kernel: [   12.048226] init: alsa-restore main process (1022) terminated with status 99
Dec  8 08:43:16 apcnb134 kernel: [   13.170378] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Dec  8 08:43:16 apcnb134 kernel: [   13.170383] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Dec  8 08:43:16 apcnb134 kernel: [   13.170951] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec  8 08:43:18 apcnb134 kernel: [   15.251781] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Dec  8 08:43:19 apcnb134 kernel: [   15.876115] init: plymouth-stop pre-start process (1348) terminated with status 1
Dec  8 08:43:27 apcnb134 kernel: [   23.605056] eth0: no IPv6 routers present
Dec  8 08:55:51 apcnb134 kernel: [  767.430259] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Dec  8 16:35:08 apcnb134 kernel: [28293.483333] usb 2-1.4: new high speed USB device number 5 using ehci_hcd
Dec  8 16:35:08 apcnb134 kernel: [28293.761223] usbcore: registered new interface driver uas
Dec  8 16:35:08 apcnb134 kernel: [28293.784035] Initializing USB Mass Storage driver...
Dec  8 16:35:08 apcnb134 kernel: [28293.784192] scsi6 : usb-storage 2-1.4:1.0
Dec  8 16:35:08 apcnb134 kernel: [28293.784327] usbcore: registered new interface driver usb-storage
Dec  8 16:35:08 apcnb134 kernel: [28293.784330] USB Mass Storage support registered.
Dec  8 16:35:09 apcnb134 kernel: [28294.782586] scsi 6:0:0:0: Direct-Access     Hitachi  HTS543232L9A300       PQ: 0 ANSI: 2 CCS
Dec  8 16:35:09 apcnb134 kernel: [28294.825929] sd 6:0:0:0: Attached scsi generic sg2 type 0
Dec  8 16:35:09 apcnb134 kernel: [28294.826693] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Dec  8 16:35:09 apcnb134 kernel: [28294.827611] sd 6:0:0:0: [sdb] Write Protect is off
Dec  8 16:35:09 apcnb134 kernel: [28294.827616] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
Dec  8 16:35:09 apcnb134 kernel: [28294.828613] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Dec  8 16:35:09 apcnb134 kernel: [28294.849655]  sdb: sdb1
Dec  8 16:35:09 apcnb134 kernel: [28294.852519] sd 6:0:0:0: [sdb] Attached SCSI disk
Dec  8 16:37:54 apcnb134 kernel: [28459.499772] usb 2-1.4: USB disconnect, device number 5
Dec  8 16:39:02 apcnb134 kernel: [28527.940144] nvidia 0000:01:00.0: power state changed by ACPI to D0
Dec  8 16:39:02 apcnb134 kernel: [28527.940149] nvidia 0000:01:00.0: power state changed by ACPI to D0
Dec  8 16:39:02 apcnb134 kernel: [28527.940156] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  8 16:39:02 apcnb134 kernel: [28527.940165] nvidia 0000:01:00.0: setting latency timer to 64
Dec  8 16:39:02 apcnb134 kernel: [28527.940169] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
Dec  8 16:39:02 apcnb134 kernel: [28527.940310] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
Dec  8 16:39:17 apcnb134 kernel: [28542.775550] nvidia 0000:01:00.0: PCI INT A disabled
Dec  8 17:01:12 apcnb134 kernel: Kernel logging (proc) stopped.

ArchangeGabriel · Le 10/12/2011, à 20:04

Essayes de blacklister nouveau, et aussi dis-moi ce que donne :

lsmod | grep acpi_call

linuxsat · Le 10/12/2011, à 22:57

J'ai blackliste nouveau:
cree /etc/modprobe.d/blacklist-nouveau.conf
avec l'unique ligne "blacklist nouveau" et lance "update-initramfs -u" qui m'a donne (normal?) puis reboote

toor@apcnb134:~$ sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-3.0.0-13-generic
W: Possible missing firmware /lib/firmware/nouveau/fuc41ad for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/fuc41ac for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/fuc409d for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/fuc409c for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc4_fuc41ad for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc4_fuc41ac for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc4_fuc409d for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc4_fuc409c for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc3_fuc41ad for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc3_fuc41ac for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc3_fuc409d for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc3_fuc409c for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc0_fuc41ad for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc0_fuc41ac for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc0_fuc409d for module nouveau
W: Possible missing firmware /lib/firmware/nouveau/nvc0_fuc409c for module nouveau
toor@apcnb134:~$

J'avais deja eu ce message au moment de l'instal (qui passe la meme commande je crois).

lsmod | grep acpi_call ne donne rien:

toor@apcnb134:~$ sudo lsmod | grep acpi_call
[sudo] password for toor: 
toor@apcnb134:~$

Je crois que rien a changé?

toor@apcnb134:~$sudo lspci -v -s 1:00.00
01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: Dell Device 1493
        Flags: fast devsel, IRQ 16
        Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at e0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 4000 [size=128]
        [virtual] Expansion ROM at e5000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel modules: nvidia_current, nouveau, nvidiafb

toor@apcnb134:~$

je ne sais pas si ca peut etre utile mais j'ai par ailleurs j'ai essaye avant cette manip d'ajouter un retour de ligne dans cardoff:
optirun ne fonctionait plus mais le ventilo de la carte etait arrete.

ArchangeGabriel · Le 10/12/2011, à 23:03

Oui ça peut changer des choses, peux tu lancer cette commande pour vérifier quelque chose (copie l'intégralité de la sortie) :

sudo apt-get install acpi-call-tools

Yogesh · Le 11/12/2011, à 07:45

Bonjour Gabriel,

J'ai fait une migration de 10.10 vers 11.04, comme tu me l'a conseillé, du coup la même installation de Bumblebee plante. Ca marche nickel sous la 10.04 et ca plante sous la 11.04... Les drivers Nvidia sont manquants... ===> Driver 'nvidia' has no matching kernel module installed...
Que dois je faire a ton avis, essayer Ironhide ou passer en 11.10 ???

Dernière modification par Yogesh (Le 11/12/2011, à 07:48)

linuxsat · Le 11/12/2011, à 13:20

ArchangeGabriel a écrit :

Oui ça peut changer des choses, peux tu lancer cette commande pour vérifier quelque chose (copie l'intégralité de la sortie) :
sudo apt-get install acpi-call-tools

Voila la sortie:

toor@apcnb134:~$ sudo apt-get install acpi-call-tools
[sudo] password for toor: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
acpi-call-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
toor@apcnb134:~$

xacrochet · Le 11/12/2011, à 16:42

Bonjour

Je dispose d'un dell xps 14z avec la configuration suivante

00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09)
        Subsystem: Dell Device 0522
        Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Device 0101 (rev 09)
        Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
        Subsystem: Dell Device 0522
        Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
        Subsystem: Dell Device 0522
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
        Subsystem: Dell Device 0522
        Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
        Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b4)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
        Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b4)
        Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
        Subsystem: Dell Device 0522
        Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 04)
        Subsystem: Dell Device 0522
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
        Subsystem: Dell Device 0522
        Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
        Subsystem: Dell Device 0522
        Kernel driver in use: i801_smbus
        Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev a1)
        Subsystem: Dell Device 0522
        Kernel driver in use: nvidia
        Kernel modules: nvidia
07:00.0 Ethernet controller: Attansic Technology Corp. Device 1083 (rev c0)
        Subsystem: Dell Device 0522
        Kernel driver in use: atl1c
        Kernel modules: atl1c
08:00.0 Network controller: Intel Corporation Device 0091 (rev 34)
        Subsystem: Intel Corporation Device 5221
        Kernel driver in use: iwlagn
        Kernel modules: iwlagn
09:00.0 Class ff00: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
        Subsystem: Dell Device 0522
0f:00.0 USB Controller: Texas Instruments Device 8241 (rev 02)
        Subsystem: Dell Device 0522
        Kernel driver in use: xhci_hcd

J'ai une gentoo 64bits dessus

xavier-laptop xavier # uname -a
Linux xavier-laptop 2.6.39.4 #4 SMP Sun Dec 11 03:42:20 CET 2011 x86_64 Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz GenuineIntel GNU/Linux

Lorsque je lance bumblebee j'ai l'erreure suivante ;

xavier-laptop xavier # /usr/local/bin/optirun glxgears
[VGL] ERROR: Could not open display :8

voici mon Xorg.0.log :

[  4105.412]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[  4105.418] X Protocol Version 11, Revision 0
[  4105.420] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
[  4105.422] Current Operating System: Linux xavier-laptop 2.6.39.4 #4 SMP Sun Dec 11 03:42:20 CET 2011 x86_64
[  4105.423] Kernel command line: root=/dev/sda3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[  4105.424] Build Date: 01 December 2011  10:48:52AM
[  4105.424]
[  4105.425] Current version of pixman: 0.22.2
[  4105.425]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  4105.427] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4105.428] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 11 16:08:17 2011
[  4105.429] (==) Using config file: "/etc/X11/xorg.conf"
[  4105.429] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  4105.430] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4105.431] (==) No Layout section.  Using the first Screen section.
[  4105.431] (**) |-->Screen "Screen1" (0)
[  4105.431] (**) |   |-->Monitor "<default monitor>"
[  4105.431] (**) |   |-->Device "Device1"
[  4105.431] (==) No monitor specified for screen "Screen1".
        Using a default monitor configuration.
[  4105.431] (==) Automatically adding devices
[  4105.431] (==) Automatically enabling devices
[  4105.431] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  4105.431]    Entry deleted from font path.
[  4105.431] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  4105.431]    Entry deleted from font path.
[  4105.431] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  4105.431]    Entry deleted from font path.
[  4105.431] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  4105.431]    Entry deleted from font path.
[  4105.431]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  4105.431] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  4105.431]    Entry deleted from font path.
[  4105.431]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  4105.431] (==) FontPath set to:
        /usr/share/fonts/misc/
[  4105.431] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  4105.431] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4105.431] (II) Loader magic: 0x7d9160
[  4105.431] (II) Module ABI versions:
[  4105.431]    X.Org ANSI C Emulation: 0.4
[  4105.431]    X.Org Video Driver: 10.0
[  4105.431]    X.Org XInput driver : 12.2
[  4105.431]    X.Org Server Extension : 5.0
[  4105.431] (--) PCI:*(0:0:2:0) 8086:0126:1028:0522 rev 9, Mem @ 0xb3400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[  4105.431] (--) PCI: (0:1:0:0) 10de:1050:1028:0522 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[  4105.431] (II) Open ACPI successful (/var/run/acpid.socket)
[  4105.431] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[  4105.431] (II) "extmod" will be loaded by default.
[  4105.431] (II) "dbe" will be loaded by default.
[  4105.431] (II) "glx" will be loaded by default.
[  4105.431] (II) "record" will be loaded by default.
[  4105.431] (II) "dri" will be loaded even though the default is to disable it.
[  4105.431] (II) "dri2" will be loaded by default.
[  4105.431] (II) LoadModule: "extmod"
[  4105.432] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[  4105.432] (II) Module extmod: vendor="X.Org Foundation"
[  4105.432]    compiled for 1.10.4, module version = 1.0.0
[  4105.432]    Module class: X.Org Server Extension
[  4105.432]    ABI class: X.Org Server Extension, version 5.0
[  4105.432] (II) Loading extension MIT-SCREEN-SAVER
[  4105.432] (II) Loading extension XFree86-VidModeExtension
[  4105.432] (II) Loading extension XFree86-DGA
[  4105.432] (II) Loading extension DPMS
[  4105.432] (II) Loading extension XVideo
[  4105.432] (II) Loading extension XVideo-MotionCompensation
[  4105.432] (II) Loading extension X-Resource
[  4105.432] (II) LoadModule: "dbe"
[  4105.432] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[  4105.432] (II) Module dbe: vendor="X.Org Foundation"
[  4105.432]    compiled for 1.10.4, module version = 1.0.0
[  4105.432]    Module class: X.Org Server Extension
[  4105.432]    ABI class: X.Org Server Extension, version 5.0
[  4105.432] (II) Loading extension DOUBLE-BUFFER
[  4105.432] (II) LoadModule: "glx"
[  4105.432] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  4105.438] (II) Module glx: vendor="NVIDIA Corporation"
[  4105.438]    compiled for 4.0.2, module version = 1.0.0
[  4105.438]    Module class: X.Org Server Extension
[  4105.438] (II) NVIDIA GLX Module  290.10  Wed Nov 16 18:01:24 PST 2011
[  4105.438] (II) Loading extension GLX
[  4105.438] (II) LoadModule: "record"
[  4105.438] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[  4105.438] (II) Module record: vendor="X.Org Foundation"
[  4105.438]    compiled for 1.10.4, module version = 1.13.0
[  4105.438]    Module class: X.Org Server Extension
[  4105.438]    ABI class: X.Org Server Extension, version 5.0
[  4105.438] (II) Loading extension RECORD
[  4105.438] (II) LoadModule: "dri2"
[  4105.438] (WW) Warning, couldn't open module dri2
[  4105.438] (II) UnloadModule: "dri2"
[  4105.438] (II) Unloading dri2
[  4105.438] (EE) Failed to load module "dri2" (module does not exist, 0)
[  4105.438] (II) LoadModule: "intel"
[  4105.438] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[  4105.439] (II) Module intel: vendor="X.Org Foundation"
[  4105.439]    compiled for 1.10.4, module version = 2.17.0
[  4105.439]    Module class: X.Org Video Driver
[  4105.439]    ABI class: X.Org Video Driver, version 10.0
[  4105.439] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[  4105.439] (--) using VT number 7

[  4105.444] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[  4105.445] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[  4105.445] (==) intel(0): RGB weight 888
[  4105.445] (==) intel(0): Default visual is TrueColor
[  4105.445] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[  4105.445] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[  4105.445] (**) intel(0): Relaxed fencing enabled
[  4105.445] (**) intel(0): Wait on SwapBuffers? enabled
[  4105.445] (**) intel(0): Triple buffering? enabled
[  4105.445] (**) intel(0): Framebuffer tiled
[  4105.445] (**) intel(0): Pixmaps tiled
[  4105.445] (**) intel(0): 3D buffers tiled
[  4105.445] (**) intel(0): SwapBuffers wait enabled
[  4105.445] (==) intel(0): video overlay key set to 0x101fe
[  4105.445] (II) intel(0): Output LVDS1 has no monitor section
[  4105.445] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[  4105.445] (II) intel(0): Output VGA1 has no monitor section
[  4105.469] (II) intel(0): Output HDMI1 has no monitor section
[  4105.470] (II) intel(0): Output DP1 has no monitor section
[  4105.470] (II) intel(0): EDID for output LVDS1
[  4105.470] (II) intel(0): Manufacturer: LGD  Model: 327  Serial#: 0
[  4105.470] (II) intel(0): Year: 2011  Week: 40
[  4105.470] (II) intel(0): EDID Version: 1.4
[  4105.470] (II) intel(0): Digital Display Input
[  4105.470] (II) intel(0): 6 bits per channel
[  4105.470] (II) intel(0): Digital interface is undefined
[  4105.470] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[  4105.470] (II) intel(0): Gamma: 2.20
[  4105.470] (II) intel(0): No DPMS capabilities specified
[  4105.470] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[  4105.470] (II) intel(0): First detailed timing is preferred mode
[  4105.470] (II) intel(0): Preferred mode is native pixel format and refresh rate
[  4105.470] (II) intel(0): redX: 0.586 redY: 0.347   greenX: 0.341 greenY: 0.558
[  4105.470] (II) intel(0): blueX: 0.157 blueY: 0.117   whiteX: 0.313 whiteY: 0.329
[  4105.470] (II) intel(0): Manufacturer's mask: 0
[  4105.470] (II) intel(0): Supported detailed timing:
[  4105.470] (II) intel(0): clock: 70.0 MHz   Image Size:  309 x 174 mm
[  4105.470] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[  4105.470] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[  4105.470] (II) intel(0): Supported detailed timing:
[  4105.470] (II) intel(0): clock: 48.3 MHz   Image Size:  309 x 174 mm
[  4105.470] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1520 h_border: 0
[  4105.470] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 794 v_border: 0
[  4105.470] (II) intel(0):  D70PV<80>140WH6
[  4105.470] (II) intel(0): Unknown vendor-specific block 0
[  4105.470] (II) intel(0): EDID (in hex):
[  4105.470] (II) intel(0):     00ffffffffffff0030e4270300000000
[  4105.470] (II) intel(0):     28150104901f11780a37459658578e28
[  4105.470] (II) intel(0):     1e505400000001010101010101010101
[  4105.470] (II) intel(0):     010101010101581b567e50000e302430
[  4105.470] (II) intel(0):     350035ae10000019de12569a50001a30
[  4105.470] (II) intel(0):     2430350035ae10000019000000fe0044
[  4105.470] (II) intel(0):     37305056803134305748360a00000000
[  4105.471] (II) intel(0):     00004131940100000001010a202000ec
[  4105.471] (II) intel(0): EDID vendor "LGD", prod id 807
[  4105.471] (II) intel(0): Printing DDC gathered Modelines:
[  4105.471] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  4105.471] (II) intel(0): Modeline "1366x768"x0.0   48.30  1366 1402 1450 1520  768 771 776 794 -hsync -vsync (31.8 kHz)
[  4105.471] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  4105.471] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  4105.471] (II) intel(0): Printing probed modes for output LVDS1
[  4105.471] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  4105.471] (II) intel(0): Modeline "1366x768"x40.0   48.30  1366 1402 1450 1520  768 771 776 794 -hsync -vsync (31.8 kHz)
[  4105.471] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  4105.471] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  4105.471] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  4105.471] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  4105.471] (II) intel(0): EDID for output VGA1
[  4105.494] (II) intel(0): EDID for output HDMI1
[  4105.495] (II) intel(0): EDID for output DP1
[  4105.495] (II) intel(0): Output LVDS1 connected
[  4105.495] (II) intel(0): Output VGA1 disconnected
[  4105.495] (II) intel(0): Output HDMI1 disconnected
[  4105.495] (II) intel(0): Output DP1 disconnected
[  4105.495] (II) intel(0): Using exact sizes for initial modes
[  4105.495] (II) intel(0): Output LVDS1 using initial mode 1366x768
[  4105.495] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4105.495] (II) intel(0): Kernel page flipping support detected, enabling
[  4105.495] (**) intel(0): Display dimensions: (310, 170) mm
[  4105.495] (**) intel(0): DPI set to (111, 114)
[  4105.495] (II) Loading sub module "fb"
[  4105.495] (II) LoadModule: "fb"
[  4105.495] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  4105.495] (II) Module fb: vendor="X.Org Foundation"
[  4105.495]    compiled for 1.10.4, module version = 1.0.0
[  4105.495]    ABI class: X.Org ANSI C Emulation, version 0.4
[  4105.495] (II) Loading sub module "dri2"
[  4105.495] (II) LoadModule: "dri2"
[  4105.495] (WW) Warning, couldn't open module dri2
[  4105.495] (II) UnloadModule: "dri2"
[  4105.495] (II) Unloading dri2
[  4105.495] (EE) intel: Failed to load module "dri2" (module does not exist, 0)
[  4105.495] (==) Depth 24 pixmap format is 32 bpp
[  4105.495] (WW) intel(0): DRI2 requires DRI2 module version 1.1.0 or later
[  4105.495] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[  4105.496] (II) UXA(0): Driver registered support for the following operations:
[  4105.496] (II)         solid
[  4105.496] (II)         copy
[  4105.496] (II)         composite (RENDER acceleration)
[  4105.496] (II)         put_image
[  4105.496] (II)         get_image
[  4105.496] (==) intel(0): Backing store disabled
[  4105.496] (==) intel(0): Silken mouse enabled
[  4105.496] (II) intel(0): Initializing HW Cursor
[  4105.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4105.552] (==) intel(0): DPMS enabled
[  4105.552] (==) intel(0): Intel XvMC decoder enabled
[  4105.552] (II) intel(0): Set up textured video
[  4105.552] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[  4105.552] (II) intel(0): direct rendering: Failed
[  4105.552] (==) intel(0): hotplug detection: "enabled"
[  4105.552] (--) RandR disabled
[  4105.552] (II) Initializing built-in extension Generic Event Extension
[  4105.552] (II) Initializing built-in extension SHAPE
[  4105.552] (II) Initializing built-in extension MIT-SHM
[  4105.552] (II) Initializing built-in extension XInputExtension
[  4105.552] (II) Initializing built-in extension XTEST
[  4105.552] (II) Initializing built-in extension BIG-REQUESTS
[  4105.552] (II) Initializing built-in extension SYNC
[  4105.552] (II) Initializing built-in extension XKEYBOARD
[  4105.552] (II) Initializing built-in extension XC-MISC
[  4105.552] (II) Initializing built-in extension XINERAMA
[  4105.552] (II) Initializing built-in extension XFIXES
[  4105.552] (II) Initializing built-in extension RENDER
[  4105.552] (II) Initializing built-in extension RANDR
[  4105.552] (II) Initializing built-in extension COMPOSITE
[  4105.552] (II) Initializing built-in extension DAMAGE
[  4105.557] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[  4105.563] (II) intel(0): Setting screen physical size to 361 x 203
[  4105.596] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  4105.596] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4105.596] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4105.596] (II) LoadModule: "evdev"
[  4105.596] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.596] (II) Module evdev: vendor="X.Org Foundation"
[  4105.596]    compiled for 1.10.4, module version = 2.6.0
[  4105.596]    Module class: X.Org XInput Driver
[  4105.596]    ABI class: X.Org XInput driver, version 12.2
[  4105.596] (II) Using input driver 'evdev' for 'Power Button'
[  4105.596] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.596] (**) Power Button: always reports core events
[  4105.596] (**) Power Button: Device: "/dev/input/event1"
[  4105.602] (--) Power Button: Found keys
[  4105.602] (II) Power Button: Configuring as keyboard
[  4105.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  4105.602] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  4105.602] (**) Option "xkb_rules" "evdev"
[  4105.602] (**) Option "xkb_model" "evdev"
[  4105.602] (**) Option "xkb_layout" "be"
[  4105.629] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[  4105.629] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4105.629] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4105.629] (II) Using input driver 'evdev' for 'Video Bus'
[  4105.629] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.629] (**) Video Bus: always reports core events
[  4105.630] (**) Video Bus: Device: "/dev/input/event3"
[  4105.638] (--) Video Bus: Found keys
[  4105.638] (II) Video Bus: Configuring as keyboard
[  4105.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3/event3"
[  4105.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  4105.638] (**) Option "xkb_rules" "evdev"
[  4105.638] (**) Option "xkb_model" "evdev"
[  4105.638] (**) Option "xkb_layout" "be"
[  4105.788] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[  4105.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4105.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4105.788] (II) Using input driver 'evdev' for 'Video Bus'
[  4105.788] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.788] (**) Video Bus: always reports core events
[  4105.788] (**) Video Bus: Device: "/dev/input/event2"
[  4105.796] (--) Video Bus: Found keys
[  4105.796] (II) Video Bus: Configuring as keyboard
[  4105.796] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input2/event2"
[  4105.796] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  4105.796] (**) Option "xkb_rules" "evdev"
[  4105.796] (**) Option "xkb_model" "evdev"
[  4105.796] (**) Option "xkb_layout" "be"
[  4105.798] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  4105.798] (II) No input driver/identifier specified (ignoring)
[  4105.804] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/event5)
[  4105.804] (**) SONiX Targus Soft-Touch Cordless Mouse: Applying InputClass "evdev pointer catchall"
[  4105.804] (**) SONiX Targus Soft-Touch Cordless Mouse: Applying InputClass "evdev pointer catchall"
[  4105.804] (II) Using input driver 'evdev' for 'SONiX Targus Soft-Touch Cordless Mouse'
[  4105.804] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.804] (**) SONiX Targus Soft-Touch Cordless Mouse: always reports core events
[  4105.804] (**) SONiX Targus Soft-Touch Cordless Mouse: Device: "/dev/input/event5"
[  4105.812] (--) SONiX Targus Soft-Touch Cordless Mouse: Found 9 mouse buttons
[  4105.812] (--) SONiX Targus Soft-Touch Cordless Mouse: Found scroll wheel(s)
[  4105.812] (--) SONiX Targus Soft-Touch Cordless Mouse: Found relative axes
[  4105.812] (--) SONiX Targus Soft-Touch Cordless Mouse: Found x and y relative axes
[  4105.812] (--) SONiX Targus Soft-Touch Cordless Mouse: Found absolute axes
[  4105.812] (II) SONiX Targus Soft-Touch Cordless Mouse: Configuring as mouse
[  4105.812] (II) SONiX Targus Soft-Touch Cordless Mouse: Adding scrollwheel support
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: YAxisMapping: buttons 4 and 5
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4105.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event5"
[  4105.812] (II) XINPUT: Adding extended input device "SONiX Targus Soft-Touch Cordless Mouse" (type: MOUSE)
[  4105.812] (II) SONiX Targus Soft-Touch Cordless Mouse: initialized for relative axes.
[  4105.812] (WW) SONiX Targus Soft-Touch Cordless Mouse: ignoring absolute axes.
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: (accel) keeping acceleration scheme 1
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: (accel) acceleration profile 0
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: (accel) acceleration factor: 2.000
[  4105.812] (**) SONiX Targus Soft-Touch Cordless Mouse: (accel) acceleration threshold: 4
[  4105.812] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/mouse0)
[  4105.812] (II) No input driver/identifier specified (ignoring)
[  4105.812] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/event6)
[  4105.812] (II) No input driver/identifier specified (ignoring)
[  4105.818] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[  4105.818] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4105.818] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4105.818] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  4105.818] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  4105.818] (**) AT Translated Set 2 keyboard: always reports core events
[  4105.818] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[  4105.824] (--) AT Translated Set 2 keyboard: Found keys
[  4105.824] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  4105.824] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[  4105.824] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  4105.824] (**) Option "xkb_rules" "evdev"
[  4105.824] (**) Option "xkb_model" "evdev"
[  4105.824] (**) Option "xkb_layout" "be"
[  4105.825] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[  4105.825] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  4105.825] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  4105.825] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  4105.825] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[  4105.825] (II) LoadModule: "synaptics"
[  4105.826] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[  4105.826] (II) Module synaptics: vendor="X.Org Foundation"
[  4105.826]    compiled for 1.10.4, module version = 1.4.0
[  4105.826]    Module class: X.Org XInput Driver
[  4105.826]    ABI class: X.Org XInput driver, version 12.2
[  4105.826] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  4105.826] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[  4105.826] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  4105.826] (**) Option "Device" "/dev/input/event7"
[  4105.864] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674
[  4105.864] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4776
[  4105.864] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  4105.864] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  4105.864] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  4105.864] (**) Option "EmulateTwoFingerMinZ" "40"
[  4105.864] (**) Option "EmulateTwoFingerMinW" "8"
[  4105.864] (**) Option "VertEdgeScroll" "on"
[  4105.864] (**) Option "HorizEdgeScroll" "on"
[  4105.864] (**) Option "VertTwoFingerScroll" "on"
[  4105.864] (**) Option "HorizTwoFingerScroll" "on"
[  4105.864] (**) Option "TapButton1" "1"
[  4105.864] (**) Option "TapButton2" "2"
[  4105.864] (**) Option "TapButton3" "3"
[  4105.864] (**) Option "CircularScrolling" "on"
[  4105.864] (**) Option "CircScrollTrigger" "2"
[  4105.896] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  4105.896] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  4105.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[  4105.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  4105.912] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  4105.912] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  4105.912] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[  4105.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  4105.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  4105.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  4105.913] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  4105.940] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  4105.940] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  4105.940] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  4105.940] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[  4105.940] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  4105.940] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[  4105.941] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  4105.941] (**) Option "Device" "/dev/input/mouse1"
[  4105.948] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[  4105.948] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[  4105.948] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[  4105.948] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[  4105.948] (**) Option "EmulateTwoFingerMinZ" "40"
[  4105.948] (**) Option "EmulateTwoFingerMinW" "8"
[  4105.948] (**) Option "VertEdgeScroll" "on"
[  4105.948] (**) Option "HorizEdgeScroll" "on"
[  4105.948] (**) Option "VertTwoFingerScroll" "on"
[  4105.948] (**) Option "HorizTwoFingerScroll" "on"
[  4105.948] (**) Option "TapButton1" "1"
[  4105.948] (**) Option "TapButton2" "2"
[  4105.948] (**) Option "TapButton3" "3"
[  4105.948] (**) Option "CircularScrolling" "on"
[  4105.948] (**) Option "CircScrollTrigger" "2"
[  4105.969] (EE) Query no Synaptics: 6003C8
[  4105.969] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[  4105.969] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[  4105.982] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[  4105.982] (II) UnloadModule: "synaptics"
[  4105.982] (II) Unloading synaptics

(j'ai encore quelques soucis avec le driver de mon touchpad ^ ^ )

Mon Xorg.1.log :

[  5472.060]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[  5472.060] X Protocol Version 11, Revision 0
[  5472.060] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
[  5472.060] Current Operating System: Linux xavier-laptop 2.6.39.4 #4 SMP Sun Dec 11 03:42:20 CET 2011 x86_64
[  5472.060] Kernel command line: root=/dev/sda3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[  5472.060] Build Date: 01 December 2011  10:48:52AM
[  5472.060]
[  5472.060] Current version of pixman: 0.22.2
[  5472.060]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  5472.060] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  5472.060] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec 11 16:31:04 2011
[  5472.060] (++) Using config file: "/etc/X11/xorg.conf.nvidia"
[  5472.060] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  5472.060] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  5472.060] (==) ServerLayout "Layout0"
[  5472.060] (**) |-->Screen "Screen1" (0)
[  5472.060] (**) |   |-->Monitor "Monitor0"
[  5472.060] (**) |   |-->Device "Device1"
[  5472.060] (**) Option "AutoAddDevices" "false"
[  5472.060] (**) Not automatically adding devices
[  5472.060] (==) Automatically enabling devices
[  5472.060] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  5472.060]    Entry deleted from font path.
[  5472.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  5472.060]    Entry deleted from font path.
[  5472.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  5472.060]    Entry deleted from font path.
[  5472.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  5472.060]    Entry deleted from font path.
[  5472.060]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  5472.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  5472.060]    Entry deleted from font path.
[  5472.060]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  5472.060] (==) FontPath set to:
        /usr/share/fonts/misc/
[  5472.060] (++) ModulePath set to "/usr/lib/opengl/nvidia/extensions,/usr/lib/xorg/modules"
[  5472.060] (**) Extension "Composite" is enabled
[  5472.060] (==) |-->Input Device "<default pointer>"
[  5472.060] (==) |-->Input Device "<default keyboard>"
[  5472.060] (==) The core pointer device wasn't specified explicitly in the layout.
        Using the default mouse configuration.
[  5472.060] (==) The core keyboard device wasn't specified explicitly in the layout.
        Using the default keyboard configuration.
[  5472.060] (II) Loader magic: 0x7d9160
[  5472.060] (II) Module ABI versions:
[  5472.060]    X.Org ANSI C Emulation: 0.4
[  5472.060]    X.Org Video Driver: 10.0
[  5472.060]    X.Org XInput driver : 12.2
[  5472.060]    X.Org Server Extension : 5.0
[  5472.061] (--) PCI:*(0:0:2:0) 8086:0126:1028:0522 rev 9, Mem @ 0xb3400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[  5472.061] (--) PCI: (0:1:0:0) 10de:1050:1028:0522 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[  5472.061] (II) Open ACPI successful (/var/run/acpid.socket)
[  5472.061] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[  5472.061] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[  5472.061] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  5472.061] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[  5472.061] (II) "dri" will be loaded by default.
[  5472.061] (II) "dri2" will be loaded by default.
[  5472.061] (II) LoadModule: "dbe"
[  5472.061] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  5472.061] (II) Module dbe: vendor="X.Org Foundation"
[  5472.061]    compiled for 1.10.4, module version = 1.0.0
[  5472.061]    Module class: X.Org Server Extension
[  5472.061]    ABI class: X.Org Server Extension, version 5.0
[  5472.061] (II) Loading extension DOUBLE-BUFFER
[  5472.061] (II) LoadModule: "extmod"
[  5472.062] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  5472.062] (II) Module extmod: vendor="X.Org Foundation"
[  5472.062]    compiled for 1.10.4, module version = 1.0.0
[  5472.062]    Module class: X.Org Server Extension
[  5472.062]    ABI class: X.Org Server Extension, version 5.0
[  5472.062] (II) Loading extension MIT-SCREEN-SAVER
[  5472.062] (II) Loading extension XFree86-VidModeExtension
[  5472.062] (II) Loading extension XFree86-DGA
[  5472.062] (II) Loading extension DPMS
[  5472.062] (II) Loading extension XVideo
[  5472.062] (II) Loading extension XVideo-MotionCompensation
[  5472.062] (II) Loading extension X-Resource
[  5472.062] (II) LoadModule: "glx"
[  5472.062] (II) Loading /usr/lib/opengl/nvidia/extensions/libglx.so
[  5472.081] (II) Module glx: vendor="NVIDIA Corporation"
[  5472.081]    compiled for 4.0.2, module version = 1.0.0
[  5472.081]    Module class: X.Org Server Extension
[  5472.081] (II) NVIDIA GLX Module  290.10  Wed Nov 16 18:01:24 PST 2011
[  5472.081] (II) Loading extension GLX
[  5472.081] (II) LoadModule: "record"
[  5472.082] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  5472.082] (II) Module record: vendor="X.Org Foundation"
[  5472.082]    compiled for 1.10.4, module version = 1.13.0
[  5472.082]    Module class: X.Org Server Extension
[  5472.082]    ABI class: X.Org Server Extension, version 5.0
[  5472.082] (II) Loading extension RECORD
[  5472.082] (II) LoadModule: "dri"
[  5472.082] (WW) Warning, couldn't open module dri
[  5472.082] (II) UnloadModule: "dri"
[  5472.082] (II) Unloading dri
[  5472.082] (EE) Failed to load module "dri" (module does not exist, 0)
[  5472.082] (II) LoadModule: "dri2"
[  5472.083] (WW) Warning, couldn't open module dri2
[  5472.083] (II) UnloadModule: "dri2"
[  5472.083] (II) Unloading dri2
[  5472.083] (EE) Failed to load module "dri2" (module does not exist, 0)
[  5472.083] (II) LoadModule: "nvidia"
[  5472.083] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  5472.085] (II) Module nvidia: vendor="NVIDIA Corporation"
[  5472.085]    compiled for 4.0.2, module version = 1.0.0
[  5472.085]    Module class: X.Org Video Driver
[  5472.085] (II) LoadModule: "mouse"
[  5472.085] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  5472.085] (II) Module mouse: vendor="X.Org Foundation"
[  5472.085]    compiled for 1.10.4, module version = 1.7.1
[  5472.085]    Module class: X.Org XInput Driver
[  5472.085]    ABI class: X.Org XInput driver, version 12.2
[  5472.085] (II) LoadModule: "kbd"
[  5472.085] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[  5472.086] (II) Module kbd: vendor="X.Org Foundation"
[  5472.086]    compiled for 1.10.4, module version = 1.6.0
[  5472.086]    Module class: X.Org XInput Driver
[  5472.086]    ABI class: X.Org XInput driver, version 12.2
[  5472.086] (II) NVIDIA dlloader X Driver  290.10  Wed Nov 16 17:41:10 PST 2011
[  5472.086] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  5472.086] (++) using VT number 8

[  5472.086] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[  5472.086] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[  5472.086] (II) Loading sub module "fb"
[  5472.086] (II) LoadModule: "fb"
[  5472.086] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5472.086] (II) Module fb: vendor="X.Org Foundation"
[  5472.086]    compiled for 1.10.4, module version = 1.0.0
[  5472.086]    ABI class: X.Org ANSI C Emulation, version 0.4
[  5472.086] (II) Loading sub module "wfb"
[  5472.086] (II) LoadModule: "wfb"
[  5472.086] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  5472.087] (II) Module wfb: vendor="X.Org Foundation"
[  5472.087]    compiled for 1.10.4, module version = 1.0.0
[  5472.087]    ABI class: X.Org ANSI C Emulation, version 0.4
[  5472.087] (II) Loading sub module "ramdac"
[  5472.087] (II) LoadModule: "ramdac"
[  5472.087] (II) Module "ramdac" already built-in
[  5472.087] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  5472.087] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  5472.087] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5472.087] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  5472.087] (==) NVIDIA(0): RGB weight 888
[  5472.087] (==) NVIDIA(0): Default visual is TrueColor
[  5472.087] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  5472.087] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[  5472.087] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[  5472.087] (**) NVIDIA(0): Enabling 2D acceleration
[  5472.429] (WW) NVIDIA(GPU-0): Unable to read EDID for display device DFP-0
[  5472.431] (II) NVIDIA(0): NVIDIA GPU GeForce GT 520M (GF119) at PCI:1:0:0 (GPU-0)
[  5472.431] (--) NVIDIA(0): Memory: 1048576 kBytes
[  5472.431] (--) NVIDIA(0): VideoBIOS: 75.19.23.00.03
[  5472.431] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  5472.431] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  5472.431] (--) NVIDIA(0): Connected display device(s) on GeForce GT 520M at PCI:1:0:0
[  5472.431] (--) NVIDIA(0):     DFP-0
[  5472.431] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[  5472.431] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[  5472.436] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[  5472.436] (**) NVIDIA(0):     enabled on all display devices.
[  5472.439] (II) NVIDIA(0): Assigned Display Device: DFP-0
[  5472.439] (==) NVIDIA(0):
[  5472.439] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  5472.439] (==) NVIDIA(0):     will be used as the requested mode.
[  5472.439] (==) NVIDIA(0):
[  5472.439] (II) NVIDIA(0): Validated modes:
[  5472.439] (II) NVIDIA(0):     "nvidia-auto-select"
[  5472.439] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  5472.441] (WW) NVIDIA(0): Unable to get display device DFP-0's EDID; cannot compute DPI
[  5472.441] (WW) NVIDIA(0):     from DFP-0's EDID.
[  5472.442] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  5472.442] (--) Depth 24 pixmap format is 32 bpp
[  5472.442] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  5472.442] (II) NVIDIA:     access.
[  5472.490] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[  5472.512] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[  5472.513] (II) Loading extension NV-GLX
[  5472.533] (==) NVIDIA(0): Disabling shared memory pixmaps
[  5472.533] (==) NVIDIA(0): Backing store disabled
[  5472.533] (==) NVIDIA(0): Silken mouse enabled
[  5472.533] (**) NVIDIA(0): DPMS enabled
[  5472.534] (II) Loading extension NV-CONTROL
[  5472.534] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no
[  5472.534] (WW) NVIDIA(0):     such display device could be found, or all display devices
[  5472.534] (WW) NVIDIA(0):     by that name are currently unavailable.
[  5472.534] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[  5472.534] (WW) NVIDIA(0):     display device could be found, or all display devices by
[  5472.534] (WW) NVIDIA(0):     that name are currently unavailable.
[  5472.534] (II) Loading extension XINERAMA
[  5472.534] (WW) NVIDIA(0): Option "IgnoreEDID" is not used
[  5472.534] (II) Loading sub module "dri2"
[  5472.534] (II) LoadModule: "dri2"
[  5472.534] (WW) Warning, couldn't open module dri2
[  5472.534] (II) UnloadModule: "dri2"
[  5472.534] (II) Unloading dri2
[  5472.534] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[  5472.534] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[  5472.534] (II) NVIDIA(0):     libvdpau.
[  5472.534] (==) RandR enabled
[  5472.534] (II) Initializing built-in extension Generic Event Extension
[  5472.534] (II) Initializing built-in extension SHAPE
[  5472.534] (II) Initializing built-in extension MIT-SHM
[  5472.534] (II) Initializing built-in extension XInputExtension
[  5472.534] (II) Initializing built-in extension XTEST
[  5472.534] (II) Initializing built-in extension BIG-REQUESTS
[  5472.534] (II) Initializing built-in extension SYNC
[  5472.534] (II) Initializing built-in extension XKEYBOARD
[  5472.534] (II) Initializing built-in extension XC-MISC
[  5472.534] (II) Initializing built-in extension XINERAMA
[  5472.534] (II) Initializing built-in extension XFIXES
[  5472.534] (II) Initializing built-in extension RENDER
[  5472.534] (II) Initializing built-in extension RANDR
[  5472.534] (II) Initializing built-in extension COMPOSITE
[  5472.534] (II) Initializing built-in extension DAMAGE
[  5472.535] (II) Initializing extension GLX
[  5472.580] (II) Using input driver 'mouse' for '<default pointer>'
[  5472.580] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  5472.580] (**) Option "CorePointer"
[  5472.581] (**) <default pointer>: always reports core events
[  5472.581] (WW) <default pointer>: No Device specified, looking for one...
[  5472.620] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[  5472.620] (--) <default pointer>: Device: "/dev/input/mice"
[  5472.620] (==) <default pointer>: Protocol: "Auto"
[  5472.620] (**) <default pointer>: always reports core events
[  5472.620] (**) Option "Device" "/dev/input/mice"
[  5472.652] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[  5472.652] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[  5472.652] (**) <default pointer>: Buttons: 9
[  5472.652] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[  5472.652] (**) <default pointer>: (accel) keeping acceleration scheme 1
[  5472.652] (**) <default pointer>: (accel) acceleration profile 0
[  5472.652] (**) <default pointer>: (accel) acceleration factor: 2.000
[  5472.652] (**) <default pointer>: (accel) acceleration threshold: 4
[  5472.660] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[  5472.953] (II) <default pointer>: ps2EnableDataReporting: succeeded
[  5472.953] (II) Using input driver 'kbd' for '<default keyboard>'
[  5472.954] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[  5472.954] (**) Option "CoreKeyboard"
[  5472.954] (**) <default keyboard>: always reports core events
[  5472.954] (**) <default keyboard>: always reports core events
[  5472.954] (**) Option "Protocol" "standard"
[  5472.954] (**) Option "XkbRules" "base"
[  5472.954] (**) Option "XkbModel" "pc105"
[  5472.954] (**) Option "XkbLayout" "us"
[  5472.954] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
[  5472.968] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  5472.968] (II) AutoAddDevices is off - not adding device.
[  5472.968] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[  5472.968] (II) AutoAddDevices is off - not adding device.
[  5473.116] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[  5473.116] (II) AutoAddDevices is off - not adding device.
[  5473.117] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  5473.117] (II) AutoAddDevices is off - not adding device.
[  5473.121] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/event5)
[  5473.121] (II) AutoAddDevices is off - not adding device.
[  5473.121] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/mouse0)
[  5473.121] (II) AutoAddDevices is off - not adding device.
[  5473.121] (II) config/udev: Adding input device SONiX Targus Soft-Touch Cordless Mouse (/dev/input/event6)
[  5473.121] (II) AutoAddDevices is off - not adding device.
[  5473.123] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[  5473.123] (II) AutoAddDevices is off - not adding device.
[  5473.123] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[  5473.123] (II) AutoAddDevices is off - not adding device.
[  5473.123] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  5473.123] (II) AutoAddDevices is off - not adding device.

Mon Xorg.conf :

Section "Module"
        disable        "dri"
EndSection

Section "ServerFlags"
Option "AllowEmptyInput" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName     "Unknown"
ModelName      "Unknown"
HorizSync       28.0 - 73.0
VertRefresh     43.0 - 72.0
Option         "DPMS"
EndSection
Section "Device"
Identifier     "Device1"
Driver         "intel"
VendorName     "onboard"
BusID          "PCI:0:2:0"
#Screen         1
EndSection
Section "Screen"
Identifier     "Screen1"
Device         "Device1"
Monitor        "Monitor1"
DefaultDepth    24
SubSection     "Display"
Depth       24
EndSubSection
EndSection

Mon xorg.conf.nvidia :

ection "DRI"
        Mode 0666
EndSection

Section "ServerLayout"
        Identifier     "Layout0"
        Screen         "Screen1"
        Option         "AutoAddDevices" "false"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "Files"
EndSection

Section "Device"
        Identifier     "Device1"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BusID          "PCI:01:00:0"
        Option         "IgnoreEDID"
        Option         "ConnectedMonitor" "DFP-0"
EndSection

Section "Screen"
        Identifier     "Screen1"
        Device         "Device1"
        Monitor        "Monitor0"
        DefaultDepth    24
        SubSection     "Display"
                Depth       24
        EndSubSection
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Unknown"
        HorizSync       28.0 - 73.0
        VertRefresh     43.0 - 72.0
        Option         "DPMS"
EndSection

l'output de mon xrandr (pour le choix de l'option connected monitor)

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
   1366x768       60.0*+   40.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)

je peux poster ma config kernel si tu en a besoin (ou tout autre information nécessaire).

c'est certainement une erreur de configuration de ma part .. mais pourrais tu jeter un oeil au problème que je rencontre au lancement de bumblebee?

merci (et désolé pour le flood)

Xavier

ArchangeGabriel · Le 11/12/2011, à 17:30

Yogesh a écrit :

Bonjour Gabriel,
J'ai fait une migration de 10.10 vers 11.04, comme tu me l'a conseillé, du coup la même installation de Bumblebee plante. Ca marche nickel sous la 10.04 et ca plante sous la 11.04... Les drivers Nvidia sont manquants... ===> Driver 'nvidia' has no matching kernel module installed...
Que dois je faire a ton avis, essayer Ironhide ou passer en 11.10 ???

Je m'appelle pas Gabriel en fait, utilises plutôt Archange si tu veux faire court.

Est-ce que tu es désormais capable d'utiliser l'écran ? Sinon, continue et passe à 11.10, on s'occupera de bumblebee après.

Si oui, alors fais ceci :

sudo apt-get purge bumblebee nvidia-current

sudo update-initramfs -u

Redémarre.

sudo apt-get install bumblebee

@linuxsat : Définitivement étrange... Tu peux me donner le contenu des fichiers suivants :

/etc/bumblebee/bumblebee.conf
/etc/bumblebee/cardon
/etc/bumblebee/cardoff

@xacrochet : Quelle version de Bumblebee utilises-tu ?

Dernière modification par ArchangeGabriel (Le 11/12/2011, à 17:30)

linuxsat · Le 11/12/2011, à 19:14

@ArchangeGabriel:

le cardon

\_SB.PCI0.PEG0.VID._ON

le cardoff

\_SB.PCI0.PEG0.VID._OFF

et bumblebee.conf

### Bumblebee daemon configuration file.
### Boolean options accept 'Y' and 'N'. Do not use true/false or 0/1.

### Modifications made here will need a daemon restart to take effect.

# Should bumblebee service be stopped after last optirun program is closed ?
STOP_SERVICE_ON_EXIT=N

# How many seconds should be waited before giving up on starting the X server ?
X_SERVER_TIMEOUT=10

# Display for the nVidia X Server, choose a higher display (e.g. :5) if you use
# Fast User Switching which starts incrementing from :0 (:0, :1, :2, ...).
VGL_DISPLAY=:8

# The video driver to be used. Supported drivers are 'nvidia' and 'nouveau'.
# Nouveau driver can be used if the available drivers are available and the
# experimental Mesa Gallium3D libraries are present.
DRIVER='nvidia'

# The Xorg configuration to be used, leaving it empty will base the file on the
# driver name, which is usually /etc/bumblebee/xorg.conf.DRIVER
X_CONFFILE=

# The group that is allowed to use Bumblebee. Note that the user needs to
# re-login for group membership changes to apply.
BUMBLEBEE_GROUP=bumblebee

# WARNING ! Power management is a very unstable feature for now, use it at your
# own risk. You won't get any support if you use this function. Please set
# first /etc/bumblebee/cardon and /etc/bumblebee/cardoff by just writing your
# calls there (one per line) and nothing else or you will face errors :
# \_SB.PCI0.PEG0.GFX0_ON
# Or :
# \_SB.PCI0.RP00.VGA._DSM {0x01,0x02} 0x03 0x04 {0x1,0x0,0x0,0x3}
# \_SB.PCI0.RP00.VGA._PS0
# You should also set STOP_SERVICE_ON_EXIT to Y if you really want to save
# power/battery life.
# See https://github.com/Bumblebee-Project/Bumblebee/wiki/ACPI-for-Developers
# for more information.
ENABLE_POWER_MANAGEMENT=Y
STOP_SERVICE_ON_EXIT=Y

### The below only affects optirun, restarting the daemon is not necessary

# Image transport from bumblebee X server to screen.
# Possible values: proxy, jpeg, rgb, xv or yuv (default = proxy)
VGL_COMPRESS=proxy

# If ECO mode is active, the nvidia card will not be used if not plugged in
# (running on battery). This setting has only effect on newly started programs.
# This feature is still not enablend and depends on power-management features.
ECO_MODE=N

# Fall back on using the Intel graphics card if the nVidia one is not available.
# If disabled, optirun will quit after displaying an error message.
FALLBACK_START=N

xacrochet · Le 11/12/2011, à 20:34

@Archange :

D'après portage je suis en 0.0.2

Merci pour ton aide.

Xavier

nono88170 · Le 12/12/2011, à 00:24

Un très grand merci pour ce fabuleux travail accompli

Joël

rsuinux · Le 13/12/2011, à 22:01

bonjour;
bravo pour votre travail!
Juste une petite question. Je suis sous archlinux, etça marche, mais comment fait on pour trouver les parametres à placer danscardon et cardoff?
Je suis sur un portable asus X53S. J'ai utilisé test_off.sh maos cela ne m'aide pas beaucoup:

test_off.sh 
Trying \_SB.PCI0.P0P1.VGA._OFF: failed
Trying \_SB.PCI0.P0P2.VGA._OFF: failed
Trying \_SB_.PCI0.OVGA.ATPX: failed
Trying \_SB_.PCI0.OVGA.XTPX: failed
Trying \_SB.PCI0.P0P3.PEGP._OFF: failed
Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
Trying \_SB.PCI0.P0P1.PEGP._OFF: failed
Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
Trying \_SB.PCI0.PEG1.GFX0._OFF: failed
Trying \_SB.PCI0.PEG0.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG1.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG0.PEGP._OFF: failed
Trying \_SB.PCI0.XVR0.Z01I.DGOF: failed
Trying \_SB.PCI0.PEGR.GFX0._OFF: works!

Les bouts de codetrouvés ici ou là sont tous différents, sans donner la méthode de création. C"est pourtant le plus interessant!

Merci.

ArchangeGabriel · Le 13/12/2011, à 23:04

linuxsat a écrit :

@ArchangeGabriel:

le cardon

\_SB.PCI0.PEG0.VID._ON

le cardoff

\_SB.PCI0.PEG0.VID._OFF

et bumblebee.conf

### Bumblebee daemon configuration file.
### Boolean options accept 'Y' and 'N'. Do not use true/false or 0/1.

### Modifications made here will need a daemon restart to take effect.

# Should bumblebee service be stopped after last optirun program is closed ?
STOP_SERVICE_ON_EXIT=N

# How many seconds should be waited before giving up on starting the X server ?
X_SERVER_TIMEOUT=10

# Display for the nVidia X Server, choose a higher display (e.g. :5) if you use
# Fast User Switching which starts incrementing from :0 (:0, :1, :2, ...).
VGL_DISPLAY=:8

# The video driver to be used. Supported drivers are 'nvidia' and 'nouveau'.
# Nouveau driver can be used if the available drivers are available and the
# experimental Mesa Gallium3D libraries are present.
DRIVER='nvidia'

# The Xorg configuration to be used, leaving it empty will base the file on the
# driver name, which is usually /etc/bumblebee/xorg.conf.DRIVER
X_CONFFILE=

# The group that is allowed to use Bumblebee. Note that the user needs to
# re-login for group membership changes to apply.
BUMBLEBEE_GROUP=bumblebee

# WARNING ! Power management is a very unstable feature for now, use it at your
# own risk. You won't get any support if you use this function. Please set
# first /etc/bumblebee/cardon and /etc/bumblebee/cardoff by just writing your
# calls there (one per line) and nothing else or you will face errors :
# \_SB.PCI0.PEG0.GFX0_ON
# Or :
# \_SB.PCI0.RP00.VGA._DSM {0x01,0x02} 0x03 0x04 {0x1,0x0,0x0,0x3}
# \_SB.PCI0.RP00.VGA._PS0
# You should also set STOP_SERVICE_ON_EXIT to Y if you really want to save
# power/battery life.
# See https://github.com/Bumblebee-Project/Bumblebee/wiki/ACPI-for-Developers
# for more information.
ENABLE_POWER_MANAGEMENT=Y
STOP_SERVICE_ON_EXIT=Y

### The below only affects optirun, restarting the daemon is not necessary

# Image transport from bumblebee X server to screen.
# Possible values: proxy, jpeg, rgb, xv or yuv (default = proxy)
VGL_COMPRESS=proxy

# If ECO mode is active, the nvidia card will not be used if not plugged in
# (running on battery). This setting has only effect on newly started programs.
# This feature is still not enablend and depends on power-management features.
ECO_MODE=N

# Fall back on using the Intel graphics card if the nVidia one is not available.
# If disabled, optirun will quit after displaying an error message.
FALLBACK_START=N

Ok, le problème c'est que tu as ajouté une ligne STOP_SERVICE_ON_EXIT=Y au lieu de modifier l'existante. Supprime la ligne ajoutée et change l'autre, regarde si c'est mieux.

xacrochet a écrit :

@Archange :
D'après portage je suis en 0.0.2
Merci pour ton aide.
Xavier

Hum, je crains ne pas pouvoir t'aider, je n'avais pas vu que tu étais sous Gentoo, et tu utilises donc un fork de l'ancienne version complètement buggée. Cela dit, donne moi tout de même ton Xorg.8.log, si ça se trouve c'est tout con.

rsuinux a écrit :

bonjour;
bravo pour votre travail!
Juste une petite question. Je suis sous archlinux, etça marche, mais comment fait on pour trouver les parametres à placer danscardon et cardoff?
Je suis sur un portable asus X53S. J'ai utilisé test_off.sh maos cela ne m'aide pas beaucoup:
test_off.sh 
Trying \_SB.PCI0.P0P1.VGA._OFF: failed
Trying \_SB.PCI0.P0P2.VGA._OFF: failed
Trying \_SB_.PCI0.OVGA.ATPX: failed
Trying \_SB_.PCI0.OVGA.XTPX: failed
Trying \_SB.PCI0.P0P3.PEGP._OFF: failed
Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
Trying \_SB.PCI0.P0P1.PEGP._OFF: failed
Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
Trying \_SB.PCI0.PEG1.GFX0._OFF: failed
Trying \_SB.PCI0.PEG0.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG1.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG0.PEGP._OFF: failed
Trying \_SB.PCI0.XVR0.Z01I.DGOF: failed
Trying \_SB.PCI0.PEGR.GFX0._OFF: works!
Les bouts de codetrouvés ici ou là sont tous différents, sans donner la méthode de création. C"est pourtant le plus interessant!
Merci.

Ce fichier test_off.sh est une m***e intersidérale.

Pas vraiment de méthode de création, il s'agit de rétro-enginerie à partir des tables ACPI (DSDT et SSDT principalement). Pour obtenir ceux de ton modèle, le mieux c'est encore de suivre la procédure au début du topic.

xacrochet · Le 14/12/2011, à 11:46

Salut

Voilà mon Xorg.1.log (je n'ai pas de *.8.*)

[    15.063]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    15.063] X Protocol Version 11, Revision 0
[    15.063] Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
[    15.063] Current Operating System: Linux xavier-laptop 2.6.39.4 #5 SMP Mon Dec 12 17:31:01 CET 2011 x86_64
[    15.063] Kernel command line: root=/dev/sda3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[    15.063] Build Date: 01 December 2011  10:48:52AM
[    15.063]
[    15.063] Current version of pixman: 0.22.2
[    15.063]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    15.063] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.064] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Dec 14 12:35:23 2011
[    15.142] (++) Using config file: "/etc/X11/xorg.conf.nvidia"
[    15.142] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.142] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.190] (==) ServerLayout "Layout0"
[    15.190] (**) |-->Screen "Screen1" (0)
[    15.190] (**) |   |-->Monitor "Monitor0"
[    15.202] (**) |   |-->Device "Device1"
[    15.202] (**) Option "AutoAddDevices" "false"
[    15.202] (**) Not automatically adding devices
[    15.202] (==) Automatically enabling devices
[    15.222] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    15.222]    Entry deleted from font path.
[    15.222] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.222]    Entry deleted from font path.
[    15.222] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    15.222]    Entry deleted from font path.
[    15.223] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.223]    Entry deleted from font path.
[    15.223]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.224] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.224]    Entry deleted from font path.
[    15.224]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.224] (==) FontPath set to:
        /usr/share/fonts/misc/
[    15.224] (++) ModulePath set to "/usr/lib/opengl/nvidia/extensions,/usr/lib/xorg/modules"
[    15.224] (**) Extension "Composite" is enabled
[    15.224] (==) |-->Input Device "<default pointer>"
[    15.224] (==) |-->Input Device "<default keyboard>"
[    15.224] (==) The core pointer device wasn't specified explicitly in the layout.
        Using the default mouse configuration.
[    15.224] (==) The core keyboard device wasn't specified explicitly in the layout.
        Using the default keyboard configuration.
[    15.224] (II) Loader magic: 0x7d9160
[    15.224] (II) Module ABI versions:
[    15.224]    X.Org ANSI C Emulation: 0.4
[    15.224]    X.Org Video Driver: 10.0
[    15.224]    X.Org XInput driver : 12.2
[    15.224]    X.Org Server Extension : 5.0
[    15.225] (--) PCI:*(0:0:2:0) 8086:0126:1028:0522 rev 9, Mem @ 0xb3400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[    15.225] (--) PCI: (0:1:0:0) 10de:1050:1028:0522 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    15.225] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.225] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    15.225] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    15.225] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    15.225] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    15.225] (II) "dri" will be loaded by default.
[    15.225] (II) "dri2" will be loaded by default.
[    15.225] (II) LoadModule: "dbe"
[    15.373] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.387] (II) Module dbe: vendor="X.Org Foundation"
[    15.387]    compiled for 1.10.4, module version = 1.0.0
[    15.387]    Module class: X.Org Server Extension
[    15.387]    ABI class: X.Org Server Extension, version 5.0
[    15.387] (II) Loading extension DOUBLE-BUFFER
[    15.387] (II) LoadModule: "extmod"
[    15.387] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.389] (II) Module extmod: vendor="X.Org Foundation"
[    15.389]    compiled for 1.10.4, module version = 1.0.0
[    15.389]    Module class: X.Org Server Extension
[    15.389]    ABI class: X.Org Server Extension, version 5.0
[    15.389] (II) Loading extension MIT-SCREEN-SAVER
[    15.389] (II) Loading extension XFree86-VidModeExtension
[    15.389] (II) Loading extension XFree86-DGA
[    15.389] (II) Loading extension DPMS
[    15.389] (II) Loading extension XVideo
[    15.389] (II) Loading extension XVideo-MotionCompensation
[    15.389] (II) Loading extension X-Resource
[    15.389] (II) LoadModule: "glx"
[    15.389] (II) Loading /usr/lib/opengl/nvidia/extensions/libglx.so
[    15.501] (II) Module glx: vendor="NVIDIA Corporation"
[    15.506]    compiled for 4.0.2, module version = 1.0.0
[    15.506]    Module class: X.Org Server Extension
[    15.506] (II) NVIDIA GLX Module  290.10  Wed Nov 16 18:01:24 PST 2011
[    15.506] (II) Loading extension GLX
[    15.506] (II) LoadModule: "record"
[    15.506] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.507] (II) Module record: vendor="X.Org Foundation"
[    15.507]    compiled for 1.10.4, module version = 1.13.0
[    15.507]    Module class: X.Org Server Extension
[    15.507]    ABI class: X.Org Server Extension, version 5.0
[    15.507] (II) Loading extension RECORD
[    15.507] (II) LoadModule: "dri"
[    15.508] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.557] (II) Module dri: vendor="X.Org Foundation"
[    15.557]    compiled for 1.10.4, module version = 1.0.0
[    15.557]    ABI class: X.Org Server Extension, version 5.0
[    15.557] (II) Loading extension XFree86-DRI
[    15.557] (II) LoadModule: "dri2"
[    15.557] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.559] (II) Module dri2: vendor="X.Org Foundation"
[    15.559]    compiled for 1.10.4, module version = 1.2.0
[    15.559]    ABI class: X.Org Server Extension, version 5.0
[    15.559] (II) Loading extension DRI2
[    15.559] (II) LoadModule: "nvidia"
[[    15.642] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.727] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.729]    compiled for 4.0.2, module version = 1.0.0
[    15.729]    Module class: X.Org Video Driver
[    15.746] (II) LoadModule: "mouse"
[    15.746] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    15.756] (II) Module mouse: vendor="X.Org Foundation"
[    15.756]    compiled for 1.10.4, module version = 1.7.1
[    15.756]    Module class: X.Org XInput Driver
[    15.756]    ABI class: X.Org XInput driver, version 12.2
[    15.756] (II) LoadModule: "kbd"
[    15.756] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[    15.767] (II) Module kbd: vendor="X.Org Foundation"
[    15.767]    compiled for 1.10.4, module version = 1.6.0
[    15.767]    Module class: X.Org XInput Driver
[    15.767]    ABI class: X.Org XInput driver, version 12.2
[    15.767] (II) NVIDIA dlloader X Driver  290.10  Wed Nov 16 17:41:10 PST 2011
[    15.767] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.768] (++) using VT number 8

[    15.768] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    15.769] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    15.769] (II) Loading sub module "fb"
[    15.769] (II) LoadModule: "fb"
[    15.769] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.783] (II) Module fb: vendor="X.Org Foundation"
[    15.783]    compiled for 1.10.4, module version = 1.0.0
[    15.783]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.783] (II) Loading sub module "wfb"
[    15.783] (II) LoadModule: "wfb"
[    15.783] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.796] (II) Module wfb: vendor="X.Org Foundation"
[    15.796]    compiled for 1.10.4, module version = 1.0.0
[    15.797]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.797] (II) Loading sub module "ramdac"
[    15.797] (II) LoadModule: "ramdac"
[    15.797] (II) Module "ramdac" already built-in
[    15.806] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.806] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.806] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.823] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    15.823] (==) NVIDIA(0): RGB weight 888
[    15.823] (==) NVIDIA(0): Default visual is TrueColor
[    15.823] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.823] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[    15.823] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[    15.823] (**) NVIDIA(0): Enabling 2D acceleration
[    17.875] (WW) NVIDIA(GPU-0): Unable to read EDID for display device DFP-0
[    17.888] (II) NVIDIA(0): NVIDIA GPU GeForce GT 520M (GF119) at PCI:1:0:0 (GPU-0)
[    17.888] (--) NVIDIA(0): Memory: 1048576 kBytes
[    17.888] (--) NVIDIA(0): VideoBIOS: 75.19.23.00.03
[    17.888] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    17.888] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    17.888] (--) NVIDIA(0): Connected display device(s) on GeForce GT 520M at PCI:1:0:0
[    17.888] (--) NVIDIA(0):     DFP-0
[    17.888] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[    17.888] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    17.891] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[    17.891] (**) NVIDIA(0):     enabled on all display devices.
[    17.895] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    17.895] (==) NVIDIA(0):
[    17.895] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    17.895] (==) NVIDIA(0):     will be used as the requested mode.
[    17.895] (==) NVIDIA(0):
[    17.895] (II) NVIDIA(0): Validated modes:
[    17.895] (II) NVIDIA(0):     "nvidia-auto-select"
[    17.895] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    17.897] (WW) NVIDIA(0): Unable to get display device DFP-0's EDID; cannot compute DPI
[    17.897] (WW) NVIDIA(0):     from DFP-0's EDID.
[    17.897] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    17.897] (--) Depth 24 pixmap format is 32 bpp
[    17.897] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    17.897] (II) NVIDIA:     access.
[    17.944] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    17.968] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    17.969] (II) Loading extension NV-GLX
[    18.006] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.006] (==) NVIDIA(0): Backing store disabled
[    18.006] (==) NVIDIA(0): Silken mouse enabled
[    18.006] (**) NVIDIA(0): DPMS enabled
[    18.006] (II) Loading extension NV-CONTROL
[    18.007] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no
[    18.007] (WW) NVIDIA(0):     such display device could be found, or all display devices
[    18.007] (WW) NVIDIA(0):     by that name are currently unavailable.
[    18.007] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[    18.007] (WW) NVIDIA(0):     display device could be found, or all display devices by
[    18.007] (WW) NVIDIA(0):     that name are currently unavailable.
[    18.007] (II) Loading extension XINERAMA
[    18.007] (WW) NVIDIA(0): Option "IgnoreEDID" is not used
[    18.007] (II) Loading sub module "dri2"
[    18.007] (II) LoadModule: "dri2"
[    18.007] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.007] (II) Module dri2: vendor="X.Org Foundation"
[    18.007]    compiled for 1.10.4, module version = 1.2.0
[    18.007]    ABI class: X.Org Server Extension, version 5.0
[    18.007] (II) NVIDIA(0): [DRI2] Setup complete
[    18.007] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.007] (==) RandR enabled
[    18.007] (II) Initializing built-in extension Generic Event Extension
[    18.007] (II) Initializing built-in extension SHAPE
[    18.007] (II) Initializing built-in extension MIT-SHM
[    18.007] (II) Initializing built-in extension XInputExtension
[    18.007] (II) Initializing built-in extension XTEST
[    18.007] (II) Initializing built-in extension BIG-REQUESTS
[    18.007] (II) Initializing built-in extension SYNC
[    18.007] (II) Initializing built-in extension XKEYBOARD
[    18.007] (II) Initializing built-in extension XC-MISC
[    18.007] (II) Initializing built-in extension XINERAMA
[    18.007] (II) Initializing built-in extension XFIXES
[    18.007] (II) Initializing built-in extension RENDER
[    18.007] (II) Initializing built-in extension RANDR
[    18.007] (II) Initializing built-in extension COMPOSITE
[    18.007] (II) Initializing built-in extension DAMAGE
[    18.008] (II) Initializing extension GLX
[    18.381] (II) Using input driver 'mouse' for '<default pointer>'
[    18.381] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    18.381] (**) Option "CorePointer"
[    18.381] (**) <default pointer>: always reports core events
[    18.381] (WW) <default pointer>: No Device specified, looking for one...
[    18.403] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[    18.403] (--) <default pointer>: Device: "/dev/input/mice"
[    18.403] (==) <default pointer>: Protocol: "Auto"
[    18.403] (**) <default pointer>: always reports core events
[    18.403] (**) Option "Device" "/dev/input/mice"
[    18.426] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[    18.426] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[    18.426] (**) <default pointer>: Buttons: 9
[    18.426] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[    18.426] (**) <default pointer>: (accel) keeping acceleration scheme 1
[    18.426] (**) <default pointer>: (accel) acceleration profile 0
[    18.426] (**) <default pointer>: (accel) acceleration factor: 2.000
[    18.426] (**) <default pointer>: (accel) acceleration threshold: 4
[    18.434] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[    18.728] (II) <default pointer>: ps2EnableDataReporting: succeeded
[    18.728] (II) Using input driver 'kbd' for '<default keyboard>'
[    18.728] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[    18.728] (**) Option "CoreKeyboard"
[    18.728] (**) <default keyboard>: always reports core events
[    18.728] (**) <default keyboard>: always reports core events
[    18.728] (**) Option "Protocol" "standard"
[    18.728] (**) Option "XkbRules" "base"
[    18.728] (**) Option "XkbModel" "pc105"
[    18.728] (**) Option "XkbLayout" "us"
[    18.728] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
[    18.736] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.736] (II) AutoAddDevices is off - not adding device.
[    18.736] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    18.736] (II) AutoAddDevices is off - not adding device.
[    18.883] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    18.883] (II) AutoAddDevices is off - not adding device.
[    18.883] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    18.883] (II) AutoAddDevices is off - not adding device.
[    18.888] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    18.888] (II) AutoAddDevices is off - not adding device.
[    18.888] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    18.888] (II) AutoAddDevices is off - not adding device.
[    18.888] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.888] (II) AutoAddDevices is off - not adding device.

Je vais essayer de compiler à la main les sources disponnibles sur

https://github.com/Bumblebee-Project/Bumblebee

Merci & bonne journée

Xa

Nepenthes · Le 14/12/2011, à 12:09

Salut !
J'ai installé Shank (via le dernier humble bundle) et j'obtiens une erreur de segmentation de virtualgl quand je lance le jeu... Il démarre correctement sur la carte intel, mais les effets ne fonctionnent pas (cinématiques teintées de vert, écran noir en jeu).
Le jeu embarque ses propres bibliothèques.
Il me semble avoir le même souci (segfault sur un jeu installé de la même manière) avec un autre jeu du bundle...

Y'aurait-il un moyen d'installer plus "proprement" ces jeux ?

EDIT : l'autre jeu est doukutsu, "Cave Story" (version x86).

Dernière modification par Nepenthes (Le 14/12/2011, à 12:19)

rsuinux · Le 14/12/2011, à 12:58

@ArchangeGabriel

Ce fichier test_off.sh est une m***e intersidérale.
Pas vraiment de méthode de création, il s'agit de rétro-enginerie à partir des tables ACPI (DSDT et SSDT principalement). Pour obtenir ceux de ton modèle, le mieux c'est encore de suivre la procédure au début du topic.

Merci pour cette réponse rapide!
Je me reporte donc sur ledébut du topic.

Rémi.

linuxsat · Le 14/12/2011, à 18:20

ArchangeGabriel a écrit :

Ok, le problème c'est que tu as ajouté une ligne STOP_SERVICE_ON_EXIT=Y au lieu de modifier l'existante. Supprime la ligne ajoutée et change l'autre, regarde si c'est mieux.

J'ai effectue la modif et reboote, pas de changement apparament (lspci -v -s 1:00.00 donne toujours la meme chose et le ventilo
fonctionne aussi souvent)

le nouveau bumblebee.conf

### Bumblebee daemon configuration file.
### Boolean options accept 'Y' and 'N'. Do not use true/false or 0/1.

### Modifications made here will need a daemon restart to take effect.

# Should bumblebee service be stopped after last optirun program is closed ?
STOP_SERVICE_ON_EXIT=Y

# How many seconds should be waited before giving up on starting the X server ?
X_SERVER_TIMEOUT=10

# Display for the nVidia X Server, choose a higher display (e.g. :5) if you use
# Fast User Switching which starts incrementing from :0 (:0, :1, :2, ...).
VGL_DISPLAY=:8

# The video driver to be used. Supported drivers are 'nvidia' and 'nouveau'.
# Nouveau driver can be used if the available drivers are available and the
# experimental Mesa Gallium3D libraries are present.
DRIVER='nvidia'

# The Xorg configuration to be used, leaving it empty will base the file on the
# driver name, which is usually /etc/bumblebee/xorg.conf.DRIVER
X_CONFFILE=

# The group that is allowed to use Bumblebee. Note that the user needs to
# re-login for group membership changes to apply.
BUMBLEBEE_GROUP=bumblebee

# WARNING ! Power management is a very unstable feature for now, use it at your
# own risk. You won't get any support if you use this function. Please set
# first /etc/bumblebee/cardon and /etc/bumblebee/cardoff by just writing your
# calls there (one per line) and nothing else or you will face errors :
# \_SB.PCI0.PEG0.GFX0_ON
# Or :
# \_SB.PCI0.RP00.VGA._DSM {0x01,0x02} 0x03 0x04 {0x1,0x0,0x0,0x3}
# \_SB.PCI0.RP00.VGA._PS0
# You should also set STOP_SERVICE_ON_EXIT to Y if you really want to save
# power/battery life.
# See https://github.com/Bumblebee-Project/Bumblebee/wiki/ACPI-for-Developers
# for more information.
ENABLE_POWER_MANAGEMENT=Y

### The below only affects optirun, restarting the daemon is not necessary

# Image transport from bumblebee X server to screen.
# Possible values: proxy, jpeg, rgb, xv or yuv (default = proxy)
VGL_COMPRESS=proxy

# If ECO mode is active, the nvidia card will not be used if not plugged in
# (running on battery). This setting has only effect on newly started programs.
# This feature is still not enablend and depends on power-management features.
ECO_MODE=N

# Fall back on using the Intel graphics card if the nVidia one is not available.
# If disabled, optirun will quit after displaying an error message.
FALLBACK_START=N

ArchangeGabriel · Le 14/12/2011, à 19:34

@Nepenthes : Je ne sais pas trop, j'ai vraiment très peu de temps libre, et mon linux se résume à bumblebee et ocaml. Donc je n'ai jamais eu l'occasion de tester autre chose...

@xacrochet : Effectivement, pas de :8 sur les anciennes versions et leurs dérivées. Donc c'est bien ce log, mais rien d'intéressant... Je crains ne rien pouvoir faire tant que Gentoo ne sera pas supporté par le nouveau projet.

@linuxsat : Ok, tu peux donner le nouveau bumblebee.log s'il te plaît ?

xacrochet · Le 15/12/2011, à 11:46

Ok ok. Vivement le support pour gentoo alors

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#951 Le 10/12/2011, à 14:57

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#952 Le 10/12/2011, à 14:59

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#953 Le 10/12/2011, à 16:31

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#954 Le 10/12/2011, à 16:32

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#955 Le 10/12/2011, à 16:39

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#956 Le 10/12/2011, à 19:54

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#957 Le 10/12/2011, à 20:02

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#958 Le 10/12/2011, à 20:04

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#959 Le 10/12/2011, à 22:57

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#960 Le 10/12/2011, à 23:03

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#961 Le 11/12/2011, à 07:45

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#962 Le 11/12/2011, à 13:20

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#963 Le 11/12/2011, à 16:42

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#964 Le 11/12/2011, à 17:30

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#965 Le 11/12/2011, à 19:14

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#966 Le 11/12/2011, à 20:34

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#967 Le 12/12/2011, à 00:24

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#968 Le 13/12/2011, à 22:01

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#969 Le 13/12/2011, à 23:04

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#970 Le 14/12/2011, à 11:46

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#971 Le 14/12/2011, à 12:09

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#972 Le 14/12/2011, à 12:58

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#973 Le 14/12/2011, à 18:20

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#974 Le 14/12/2011, à 19:34

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#975 Le 15/12/2011, à 11:46

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

Pied de page des forums