#1 Le 03/09/2005, à 14:24
- Ghost Line
Problème, NTFS, marchait avant mais plus maintenant !
Salutations les gens ^^
Donc voilà mon problème : j'ai deux partitions en NTFS sur mon PC. Auparavant, je n'avait aucun soucis, tout se montait bien, pas de probs. Depuis une mise à jour (j'ignore laquelle), ma première partition se monte sans problème, mais pas la seconde ... voici mon fstab :
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda2 / ext3 defaults,errors=remount-ro 0 1
/dev/hda5 none swap sw 0 0
/dev/hdd /media/cdrom0 udf,iso9660 ro,user,noauto 0 0
/dev/hdc /media/cdrom1 udf,iso9660 ro,user,noauto 0 0
/dev/hdb1 /mnt/NTFS_D ntfs ro,umask=0222,nls=utf8 0 0
/dev/hda1 /mnt/NTFS_C ntfs ro,umask=0222,nls=utf8 0 0
Donc comme je le disais, /dev/hda1 se monte sans pbs. Par contre, ca n'est pas le cas de hdb1 ...
Quand je tente un 'mount /dev/hdb1', j'obtiens 'mount: /dev/hdb1 already mounted or /mnt/NTFS_D busy' .
Voici ce que j'obtiens en faisant un strace :
ghostline@USSEnterprise:/$ strace sudo mount /dev/hdb1
execve("/usr/bin/sudo", ["sudo", "mount", "/dev/hdb1"], [/* 29 vars */]) = 0
uname({sys="Linux", node="USSEnterprise", ...}) = 0
brk(0) = 0x8063000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
access("/etc/ld.so.preload", R_OK) = 0
open("/etc/ld.so.preload", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=45273, ...}) = 0
old_mmap(NULL, 45273, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40018000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libpam.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\25\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=30360, ...}) = 0
old_mmap(NULL, 29324, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40024000
old_mmap(0x4002b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x4002b000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\f\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=9592, ...}) = 0
old_mmap(NULL, 12404, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4002c000
old_mmap(0x4002e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x4002e000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260O\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1265136, ...}) = 0
old_mmap(NULL, 1271100, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40030000
old_mmap(0x40160000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x130000) = 0x40160000
old_mmap(0x40164000, 9532, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40164000
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40167000
mprotect(0x40160000, 4096, PROT_READ) = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0x401676c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0x40018000, 45273) = 0
geteuid32() = 1000
write(2, "sudo: ", 6sudo: ) = 6
write(2, "must be setuid root", 19must be setuid root) = 19
write(2, "\n", 1
) = 1
exit_group(1) = ?
ghostline@USSEnterprise:/$
Sinon, pour mémoire, je suis sur un kernel 2.6.11-1-k7.
Merci d'avance !
Hors ligne
#2 Le 12/09/2005, à 21:50
- Ghost Line
Re : Problème, NTFS, marchait avant mais plus maintenant !
Heuuuu ... up ?
Hors ligne