#251 Le 29/03/2007, à 17:01
- Aisyk
Re : Décodeur TNT Intuix S800
Parfois, il suffit d'un redémarrage pour que la clé fonctionne...
PopOS 22.04 / AMD R5 5600 / AsusB450 / 16GoDDR4 / AMD Radeon RX5500XT / 1*1To (nvme) / 2*4To / 1*500Go SSD
Dell Latitude E7250 aisyk-=
http://www.aisyk-projets.fr
http://www.dogmazic.net/
Hors ligne
#252 Le 29/03/2007, à 18:05
- fralap
Re : Décodeur TNT Intuix S800
bonjour
aprés vous avoir lu ces pages et quelques autres,
j'ai essayé sans succes d'installer ma cle usb intuix s800:
bref apres des erreurs 2 dont la correction ne parait pas simple
une instabilité du systeme m'a obligé a tout reinstallé
il est difficile de comprendre pour un neophyte comme moi l'instalation des v4ldvb
je renonce en esperant avoir un jour des explications plus claires
ça veut dire que je vais reinstaller windows auquel j'esperais avoir echappé
mais pour la tnt ce n'est pas si evident.
peut etre existe t il d'autres cartes usb ou pci plus facile a integrer?
#253 Le 29/03/2007, à 19:25
- Markuso
Re : Décodeur TNT Intuix S800
Rebonjour!
Merci à tous de m'avoir répondu !
Pour répondre aux différentes propositions :
- ma clé est directement connectée a un port usb
- j'ai essayé de décharger et recharger le driver via les commandes suivantes :
root@ubuntu:~# rmmod dvb_usb_dibusb_mcroot@ubuntu:~# modprobe dvb_usb_dibusb_mcmais sans succès...
-le rédémarrage n'affecte pas non plus le frontend...
Bref, j'ai l'impression que le driver associé est un peu instable . Il faut peut être attendre la version définitive du noyau de feisty!
Elle est coriace cette satané clé 
Hors ligne
#254 Le 29/03/2007, à 22:49
- beug
Re : Décodeur TNT Intuix S800
ouais tellement coriace apres des jours d'essai et même une reinstalle que j'ai laissé tombé, je boot sur windows pour mater la tnt, ça marche bien, c'est dommage pour ubuntu mais voila 2 raisons brutales desormais qui font que je suis obligé de booter pour utiliser windows!! l'autre c'est profnote, un programme que j'utilise au taf et qui n'est pas utilisable avec wine ou quoi que ce soit, rhaaa
mais c'est comme ça...
@+
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#255 Le 06/04/2007, à 12:58
- beug
Re : Décodeur TNT Intuix S800
bah je suis sous feisty et je viens de tenter d'installer encore une fois cette clé tnt...
la, j'ai acces au menuconfig, incroyable, arf ... mais la deja, c'est bizare, y'a pas d'endroi pour enregistrer la config avant de fermer la session!!?
bon, make make install et.... bah kaffeine ne voit pas la clé...
par contre je vois bien dans vlc que des drivers existent pour dvb mais rien d'efficace pour le moement, je continue a chercher et a tester... 
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#256 Le 06/04/2007, à 13:46
- beug
Re : Décodeur TNT Intuix S800
cette clé est vraiment une bouze !!!
dès que j'ai la télé normale à nouveau, je la balance dans la cheminée !!! 
vive windows pour la tnt !!!
----------» ça m"enerve grave
bon je vais prendre le soleil tiens 
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#257 Le 07/04/2007, à 09:03
- hfdragon@wanda
Re : Décodeur TNT Intuix S800
beug a écrit :
y'a pas d'endroi pour enregistrer la config avant de fermer la session!!?
t'es sur que tu as bien fait sudo make menuconfig ?
Hors ligne
#258 Le 07/04/2007, à 12:01
- beug
Re : Décodeur TNT Intuix S800
ben ça ce peut bien que non, rhaaa, c'est pour ça que c'est Rrrr quand y'a 15 milles tuto comme ça ou y'a pas un poste qui dit la même chose...
bon je vais retenter tout à l'heure
merci hfdragon@wanda
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#259 Le 07/04/2007, à 12:40
- beug
Re : Décodeur TNT Intuix S800
ok donc pour enregistrer faut faire exit plusieurs fois pour arriver sur la 1ere page du menu, là il demande d'enregistrer la nouvelle config, arf
bon n'en peche que ça fonctionne toujours pas pourtant cette commande demontre bien quelque chose:
fabien50@beug:~$ modprobe -l | grep dvb
/lib/modules/2.6.20-14-generic/kernel/drivers/media/video/video-buf-dvb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/video/cx88/cx88-dvb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-core/dvb-core.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dvb-pll.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dib7000p.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dib3000mc.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dib3000mb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dibx000_common.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/mt2060.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dib7000m.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.kod'apres ce tuto là:
http://linuxtv.org/wiki/index.php/How_to_install_DVB
j'ai pas ce dossier moi dans dev, j'ai pas de dvb dans dev quoi?!
/dev/dvb/adapter0/
et ça:
fabien50@beug:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-rennes
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-rennes
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directorypourtant il est bien present ce fichier fr-rennes?!!
bahh c'est saoulant a force 
j'ai le fort sentiment que ça vient du fait que je n'ai pas de "dvb/adapter0/frontend0 dans /dev
ce dossier n'existe pas!!!!!!!!!!
If you don't see dvb-directory, then something has failed. You don't need to create it, it comes automatically. With Ubuntu 6.06.1 the problem was that dvb-ttpci was not in the firmware directory.
ben oui, elle est bien bonne celle là
enfin je veux dire que "dvb-ttpci-01.fw" est bien dans mon /lib/firmware avant d'avancer ça
bon bah +1 pour savvy tv quoi 
Dernière modification par beug (Le 07/04/2007, à 13:08)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#260 Le 07/04/2007, à 14:30
- hfdragon@wanda
Re : Décodeur TNT Intuix S800
et que donne la commande dmesg ?
Hors ligne
#261 Le 07/04/2007, à 18:18
- beug
Re : Décodeur TNT Intuix S800
le dmesg devrait faire apparaitre dvbusb quelque chose comme ça ce qui n'est pas le cas chez moi je crois:
fabien50@beug:~$ dmesg
[ 0.000000] Linux version 2.6.20-14-generic (root@rothera) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Mon Apr 2 20:37:49 UTC 2007 (Ubuntu 2.6.20-14.22-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001feec000 end: 000000001ffec000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ffec000 size: 0000000000003000 end: 000000001ffef000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2
[ 0.000000] copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[ 0.000000] BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131052) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131052
[ 0.000000] HighMem 131052 -> 131052
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131052
[ 0.000000] On node 0 totalpages: 131052
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125965 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ASUS ) @ 0x000f5340
[ 0.000000] ACPI: RSDT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec000
[ 0.000000] ACPI: FADT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0
[ 0.000000] ACPI: BOOT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec030
[ 0.000000] ACPI: MADT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec058
[ 0.000000] ACPI: DSDT (v001 ASUS P4PE-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2405.578 MHz processor.
[ 16.905287] Built 1 zonelists. Total pages: 130029
[ 16.905292] Kernel command line: root=UUID=08c47c2e-e7f9-43fd-9e7d-fa73c3ebb463 ro quiet splash
[ 16.905469] mapped APIC to ffffd000 (fee00000)
[ 16.905472] mapped IOAPIC to ffffc000 (fec00000)
[ 16.905476] Enabling fast FPU save and restore... done.
[ 16.905479] Enabling unmasked SIMD FPU exception support... done.
[ 16.905495] Initializing CPU#0
[ 16.905590] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 16.907176] Console: colour VGA+ 80x25
[ 16.907605] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.907970] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.920392] Memory: 508736k/524208k available (1992k kernel code, 14928k reserved, 893k data, 328k init, 0k highmem)
[ 16.920402] virtual kernel memory layout:
[ 16.920404] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 16.920405] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.920406] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 16.920407] lowmem : 0xc0000000 - 0xdffec000 ( 511 MB)
[ 16.920409] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 16.920410] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 16.920411] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 16.920415] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.997449] Calibrating delay using timer specific routine.. 4815.09 BogoMIPS (lpj=9630188)
[ 16.997496] Security Framework v1.0.0 initialized
[ 16.997504] SELinux: Disabled at boot.
[ 16.997523] Mount-cache hash table entries: 512
[ 16.997684] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 16.997698] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 16.997701] CPU: L2 cache: 512K
[ 16.997704] CPU: Hyper-Threading is disabled
[ 16.997706] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 16.997719] Compat vDSO mapped to ffffe000.
[ 16.997723] Remapping vsyscall page to ffffe000
[ 16.997736] Checking 'hlt' instruction... OK.
[ 17.013527] SMP alternatives: switching to UP code
[ 17.013731] Freeing SMP alternatives: 11k freed
[ 17.013964] Early unpacking initramfs... done
[ 17.328649] ACPI: Core revision 20060707
[ 17.329601] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 17.330890] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 17.330937] Total of 1 processors activated (4815.09 BogoMIPS).
[ 17.331074] ENABLING IO-APIC IRQs
[ 17.331270] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.476738] Brought up 1 CPUs
[ 17.477014] Booting paravirtualized kernel on bare hardware
[ 17.477100] Time: 12:28:59 Date: 03/07/107
[ 17.477135] NET: Registered protocol family 16
[ 17.477242] EISA bus registered
[ 17.477248] ACPI: bus type pci registered
[ 17.478961] PCI: PCI BIOS revision 2.10 entry at 0xf1e50, last bus=2
[ 17.478963] PCI: Using configuration type 1
[ 17.478965] Setting up standard PCI resources
[ 17.494489] ACPI: Interpreter enabled
[ 17.494493] ACPI: Using IOAPIC for interrupt routing
[ 17.495256] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 17.495498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 17.495735] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 17.495977] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 17.496214] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 17.496440] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.496681] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.496923] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 17.497039] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.497046] PCI: Probing PCI hardware (bus 00)
[ 17.497410] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 17.497939] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 17.497941] * this clock source is slow. If you are sure your timer does not have
[ 17.497942] * this bug, please use "acpi_pm_good" to disable the workaround
[ 17.497988] PCI: Enabled i801 SMBus device
[ 17.497995] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 17.497998] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 17.498243] Boot video device is 0000:01:00.0
[ 17.498406] PCI: Transparent bridge - 0000:00:1e.0
[ 17.498435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.499745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 17.499896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 17.507560] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.507572] pnp: PnP ACPI init
[ 17.516515] pnp: PnP ACPI: found 15 devices
[ 17.516521] PnPBIOS: Disabled by ACPI PNP
[ 17.516583] PCI: Using ACPI for IRQ routing
[ 17.516587] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.523469] NET: Registered protocol family 8
[ 17.523472] NET: Registered protocol family 20
[ 17.523769] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[ 17.523773] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[ 17.523776] pnp: 00:02: ioport range 0xec00-0xec3f has been reserved
[ 17.523779] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 17.523797] pnp: 00:0e: ioport range 0x3f0-0x3f1 has been reserved
[ 17.524134] PCI: Bridge: 0000:00:01.0
[ 17.524136] IO window: disabled.
[ 17.524142] MEM window: de000000-dfefffff
[ 17.524147] PREFETCH window: dff00000-f7ffffff
[ 17.524152] PCI: Bridge: 0000:00:1e.0
[ 17.524153] IO window: disabled.
[ 17.524159] MEM window: dd000000-dd7fffff
[ 17.524163] PREFETCH window: disabled.
[ 17.524181] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.524215] NET: Registered protocol family 2
[ 17.560655] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 17.560748] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 17.560847] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 17.560897] TCP: Hash tables configured (established 16384 bind 8192)
[ 17.560900] TCP reno registered
[ 17.572685] checking if image is initramfs... it is
[ 18.196732] Freeing initrd memory: 6742k freed
[ 18.196978] Simple Boot Flag at 0x3a set to 0x1
[ 18.197244] audit: initializing netlink socket (disabled)
[ 18.197260] audit(1175948940.372:1): initialized
[ 18.197418] VFS: Disk quotas dquot_6.5.1
[ 18.197438] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.197495] io scheduler noop registered
[ 18.197499] io scheduler anticipatory registered
[ 18.197501] io scheduler deadline registered
[ 18.197511] io scheduler cfq registered (default)
[ 18.197816] isapnp: Scanning for PnP cards...
[ 18.551313] isapnp: No Plug & Play device found
[ 18.580437] Real Time Clock Driver v1.12ac
[ 18.580494] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.580616] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.580827] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.581567] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.581900] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.582187] mice: PS/2 mouse device common for all mice
[ 18.582853] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.583161] input: Macintosh mouse button emulation as /class/input/input0
[ 18.583203] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.583208] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 18.583470] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 18.583473] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 18.586959] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.586975] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.587159] EISA: Probing bus 0 at eisa.0
[ 18.587199] EISA: Detected 0 cards.
[ 18.617267] TCP cubic registered
[ 18.617274] NET: Registered protocol family 1
[ 18.617301] Using IPI No-Shortcut mode
[ 18.617369] ACPI: (supports S0 S1 S4 S5)
[ 18.617419] Magic number: 3:709:480
[ 18.618000] Freeing unused kernel memory: 328k freed
[ 18.618880] Time: tsc clocksource has been installed.
[ 19.865563] Capability LSM initialized
[ 19.911387] ACPI: Invalid PBLK length [5]
[ 19.911424] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 20.457470] usbcore: registered new interface driver usbfs
[ 20.457497] usbcore: registered new interface driver hub
[ 20.457524] usbcore: registered new device driver usb
[ 20.458549] USB Universal Host Controller Interface driver v3.0
[ 20.458613] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.458627] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.458632] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.458797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.458827] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 20.458953] usb usb1: configuration #1 chosen from 1 choice
[ 20.458989] hub 1-0:1.0: USB hub found
[ 20.458997] hub 1-0:1.0: 2 ports detected
[ 20.560089] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
[ 20.560104] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.560109] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.560134] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.560163] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
[ 20.560271] usb usb2: configuration #1 chosen from 1 choice
[ 20.560305] hub 2-0:1.0: USB hub found
[ 20.560315] hub 2-0:1.0: 2 ports detected
[ 20.628595] Floppy drive(s): fd0 is 1.44M
[ 20.663917] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.663931] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.663936] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.663962] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.663990] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 20.664092] usb usb3: configuration #1 chosen from 1 choice
[ 20.664125] hub 3-0:1.0: USB hub found
[ 20.664135] hub 3-0:1.0: 2 ports detected
[ 20.692078] FDC 0 is a post-1991 82077
[ 20.769609] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.769631] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.769636] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.769695] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 20.769742] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.769749] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.769761] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdd800000
[ 20.773641] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.773740] usb usb4: configuration #1 chosen from 1 choice
[ 20.773772] hub 4-0:1.0: USB hub found
[ 20.773781] hub 4-0:1.0: 6 ports detected
[ 20.882215] SCSI subsystem initialized
[ 20.888408] libata version 2.20 loaded.
[ 20.894729] b44.c:v1.01 (Jun 16, 2006)
[ 20.894760] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 20.898230] eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:73:32:a1
[ 20.899967] ata_piix 0000:00:1f.1: version 2.10ac1
[ 20.899986] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.900011] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.900077] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 20.900119] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 20.900141] scsi0 : ata_piix
[ 21.063330] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 21.063335] ata1.00: 240121728 sectors, multi 16: LBA
[ 21.063340] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 21.071303] ata1.00: configured for UDMA/33
[ 21.071317] scsi1 : ata_piix
[ 21.390815] ata2.00: ATAPI, max UDMA/33
[ 21.554556] ata2.00: configured for UDMA/33
[ 21.554696] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 21.555341] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.00 PQ: 0 ANSI: 5
[ 21.574216] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[ 21.574363] sda: Write Protect is off
[ 21.574366] sda: Mode Sense: 00 3a 00 00
[ 21.574640] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.574714] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[ 21.574726] sda: Write Protect is off
[ 21.574729] sda: Mode Sense: 00 3a 00 00
[ 21.574748] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.574751] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 21.638034] sd 0:0:0:0: Attached scsi disk sda
[ 21.642269] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.642295] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.663687] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 21.663694] Uniform CD-ROM driver Revision: 3.20
[ 21.663942] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.782007] usb 4-5: new high speed USB device using ehci_hcd and address 4
[ 21.914702] usb 4-5: configuration #1 chosen from 1 choice
[ 21.950833] Attempting manual resume
[ 21.950837] swsusp: Resume From Partition 8:7
[ 21.950840] PM: Checking swsusp image.
[ 21.951164] PM: Resume from disk failed.
[ 21.990462] kjournald starting. Commit interval 5 seconds
[ 21.990475] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.153423] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 22.347063] usb 2-1: configuration #1 chosen from 1 choice
[ 22.596734] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 22.777293] usb 2-2: configuration #1 chosen from 1 choice
[ 34.919750] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.939592] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.959860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.980196] iTCO_vendor_support: vendor-support=0
[ 34.984954] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 34.985059] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x6460)
[ 34.985082] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
[ 34.985122] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 35.000046] intel_rng: FWH not detected
[ 35.191609] agpgart: Detected an Intel 845G Chipset.
[ 35.194679] agpgart: AGP aperture is 64M @ 0xf8000000
[ 35.725393] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x0065
[ 35.725416] usbcore: registered new interface driver usblp
[ 35.725420] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 35.779190] usbcore: registered new interface driver xpad
[ 35.779196] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 35.824753] input: PC Speaker as /class/input/input1
[ 35.850212] usbcore: registered new interface driver hiddev
[ 35.868172] hiddev96: USB HID v1.00 Device [Lexmark Lexmark X5100 Series] on usb-0000:00:1d.1-1
[ 35.883209] input: Silitek USB Multimedia Keyboard as /class/input/input2
[ 35.883270] input: USB HID v1.10 Keyboard [Silitek USB Multimedia Keyboard ] on usb-0000:00:1d.1-2
[ 35.893647] parport: PnPBIOS parport detected.
[ 35.893700] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 35.913335] input: Silitek USB Multimedia Keyboard as /class/input/input3
[ 35.913452] input,hiddev97: USB HID v1.10 Device [Silitek USB Multimedia Keyboard ] on usb-0000:00:1d.1-2
[ 35.913471] usbcore: registered new interface driver usbhid
[ 35.913475] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 36.157484] nvidia: module license 'NVIDIA' taints kernel.
[ 36.468175] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.468461] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 36.497343] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 36.768642] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 21
[ 36.768672] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 37.126086] AC'97 0 analog subsections not ready
[ 37.193982] intel8x0_measure_ac97_clock: measured 56107 usecs
[ 37.193985] intel8x0: clocking to 48000
[ 37.353228] lp0: using parport0 (interrupt-driven).
[ 37.387016] Adding 570268k swap on /dev/disk/by-uuid/b99ca247-6ad2-41d9-babe-24fadf10a180. Priority:-1 extents:1 across:570268k
[ 37.513125] EXT3 FS on sda3, internal journal
[ 49.758972] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 49.833155] NTFS volume version 3.1.
[ 49.883762] NTFS volume version 3.1.
[ 51.355797] NET: Registered protocol family 17
[ 53.189209] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 53.189214] b44: eth0: Flow control is off for TX and off for RX.
[ 61.734327] NET: Registered protocol family 10
[ 61.734450] lo: Disabled Privacy Extensions
[ 62.418930] input: Power Button (FF) as /class/input/input5
[ 62.423900] ACPI: Power Button (FF) [PWRF]
[ 62.463143] input: Power Button (CM) as /class/input/input6
[ 62.468098] ACPI: Power Button (CM) [PWRB]
[ 62.487819] Using specific hotkey driver
[ 62.526147] No dock devices found.
[ 62.572947] ibm_acpi: ec object not found
[ 62.712913] pcc_acpi: loading...
[ 67.449494] ppdev: user-space parallel port driver
[ 68.945386] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 68.945410] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 68.945444] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 70.240881] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 70.240887] apm: overridden by ACPI.
[ 77.742106] Bluetooth: Core ver 2.11
[ 77.742175] NET: Registered protocol family 31
[ 77.742178] Bluetooth: HCI device and connection manager initialized
[ 77.742181] Bluetooth: HCI socket layer initialized
[ 77.899503] Bluetooth: L2CAP ver 2.8
[ 77.899508] Bluetooth: L2CAP socket layer initialized
[ 78.044733] Bluetooth: RFCOMM socket layer initialized
[ 78.044749] Bluetooth: RFCOMM TTY layer initialized
[ 78.044751] Bluetooth: RFCOMM ver 1.8
[ 83.074504] eth0: no IPv6 routers present
[ 140.732710] usb 4-5: USB disconnect, address 4
[ 143.404535] usb 4-5: new high speed USB device using ehci_hcd and address 5
[ 143.541307] usb 4-5: configuration #1 chosen from 1 choice
fabien50@beug:~$bah je sais que quelque chose ne tourne pas rond mais impossible de savoir quoi
dans ce fameux tuoriel là
http://linuxtv.org/wiki/index.php/How_to_install_DVB
y'a plusieurs points qui ne sont pas pareil chez moi...
ici c'est pareil
http://jeanyves.bossard.free.fr/index.php?option=com_content&task=view&id=33&Itemid=2
rien que le 1er point, parametre du noyau, verifier que dvb est activé: je ne sais pas comment acceder a cette page de config car je suis sur kubuntu
sous kub j'ai bien une fenetre qui presente les services lancés au demarrage (system services/ regalges du system), dvb n'existe pas dans les services!?! sais pas si ça demontre quelque chose une fois de plus...
ps: en attendant, c'est sympa hfdragon@wanda de vouloir m'aider 
Dernière modification par beug (Le 07/04/2007, à 19:00)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#262 Le 07/04/2007, à 18:41
- beug
Re : Décodeur TNT Intuix S800
If you have all the modules active (listed in lsmod) but no /dev's to be found, check dmesg for any errors, ie: grep dvb /var/log/dmesg
je sais pas si les modules dvb sont activés!! je ne sais pas si ça veut dire l'usb sur lequel et connecté la clé, si c'est ça alors oui, l'usb est activé evidement...
fabien50@beug:~$ lsmod
Module Size Used by
rfcomm 40856 0
l2cap 25728 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
ppdev 10116 0
speedstep_lib 6148 0
cpufreq_userspace 5408 0
cpufreq_stats 7360 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9228 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8200 0
tc1100_wmi 8068 0
pcc_acpi 13184 0
dev_acpi 12292 0
sony_acpi 6284 0
video 16388 0
sbs 15652 0
i2c_ec 5888 1 sbs
dock 10268 0
button 8720 0
battery 10756 0
container 5248 0
ac 6020 0
asus_acpi 17308 0
backlight 7040 1 asus_acpi
ipv6 268704 12
af_packet 23816 2
nls_iso8859_1 5120 1
nls_cp437 6784 1
vfat 14208 1
fat 53916 1 vfat
nls_utf8 3072 2
ntfs 107764 2
lp 12452 0
snd_intel8x0 34204 4
snd_ac97_codec 98336 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
joydev 10816 0
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
nvidia 6837140 22
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 3 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
analog 12832 0
gameport 16520 1 analog
i2c_core 22784 2 i2c_ec,nvidia
parport_pc 36388 1
parport 36936 3 ppdev,lp,parport_pc
snd 54020 16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
usbhid 26592 0
hid 27392 1 usbhid
pcspkr 4224 0
soundcore 8672 1 snd
psmouse 38920 0
xpad 9988 0
usblp 14848 0
serio_raw 7940 0
snd_page_alloc 10888 2 snd_intel8x0,snd_pcm
intel_agp 25116 1
iTCO_wdt 11812 0
iTCO_vendor_support 4868 1 iTCO_wdt
shpchp 34324 0
pci_hotplug 32576 1 shpchp
agpgart 35400 2 nvidia,intel_agp
evdev 11008 4
tsdev 8768 0
ext3 133128 1
jbd 59816 1 ext3
mbcache 9604 1 ext3
sg 36252 0
sr_mod 17060 0
cdrom 37664 1 sr_mod
sd_mod 23428 6
ata_piix 15876 5
ata_generic 9092 0
libata 123032 2 ata_piix,ata_generic
scsi_mod 142348 4 sg,sr_mod,sd_mod,libata
b44 28044 0
mii 6528 1 b44
floppy 59524 0
generic 5124 0 [permanent]
ehci_hcd 34188 0
uhci_hcd 25360 0
usbcore 134280 6 usbhid,xpad,usblp,ehci_hcd,uhci_hcd
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capabilityfabien50@beug:~$ sudo lsusb -v
Bus 004 Device 005: ID 04ca:f004 Lite-On Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04ca Lite-On Technology Corp.
idProduct 0xf004
bcdDevice 1.00
iManufacturer 1 LITEON
iProduct 2 HYBRID-TV
iSerial 3 0000000100
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.20-14-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0000
Port 4: 0000.0000
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.20-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 002: ID 043d:0065 Lexmark International, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x043d Lexmark International, Inc.
idProduct 0x0065
bcdDevice 0.01
iManufacturer 1 Lexmark
iProduct 2 Lexmark X5100 Series
iSerial 3 17K005000017761
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 94
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 16mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 4 Scan
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 5 Print
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 73
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 100
Device Status: 0x0001
Self Powered
Bus 002 Device 003: ID 1631:5000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1631
idProduct 0x5000
bcdDevice 1.10
iManufacturer 1 Silitek
iProduct 2 USB Multimedia Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 70mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 76
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 48
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.20-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.20-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
fabien50@beug:~$Dernière modification par beug (Le 07/04/2007, à 18:55)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#263 Le 07/04/2007, à 22:45
- fralap
Re : Décodeur TNT Intuix S800
bonjour
je viens d'installer ubuntu è.04 beta et là miracle ma clé est reconnue directement:
bonne nouvelle!
#264 Le 07/04/2007, à 23:26
- beug
Re : Décodeur TNT Intuix S800
pour toi ouais
moi j'ai fais une maj vers feisty, j'attends la finale pour installer tout complétement et j'espère que ça fera comme toi
[edit] enfin je dis ça pas méchamment, c'est juste que ça fait 1 mois que je m'arrache les cheveux avec ça, arf
Dernière modification par beug (Le 08/04/2007, à 02:00)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#265 Le 09/04/2007, à 02:51
- beug
Re : Décodeur TNT Intuix S800
je crois vraiment que mon pb vient du fait que je n'ai pas ce fichier, enfin il n'a jamais été crée quoi
/dev/dvb/adapter0/
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#266 Le 13/04/2007, à 13:46
- pludov
Re : Décodeur TNT Intuix S800
Chez moi, le frontend n'apparait pas après un reboot. Il faut que je débranche et rebranche la clef pour débloquer la situation.
Il semble qu'il y ait une erreur de lecture systématique sur le bus I2C. (dixit le module avec le debug activé... Ajouter la ligne "options dib3000mc debug=1" au fichier /etc/modprobe.d/options est trés instructif !)
J'ai ajouté plusieurs tentatives sur la lecture du registre 1025 et miracle, ça marche !
Il faut modifier le fichier dib3000mc.c pour ajouter les lignes suivantes (celles avec un +... Evidemment, il ne faut pas ajouter le + !)
static int dib3000mc_identify(struct dib3000mc_state *state)
{
u16 value;
+ int trycount = 3;
+ do {
+ value = dib3000mc_read_word(state, 1025);
+ trycount--;
+ } while(trycount && !value);
if ((value != 0x5a00) && (value != 0x01b3)) {
dprintk("-E- DiB3000MC/P: wrong Vendor ID (read=0x%x)\n",value);
return -EREMOTEIO;
}
Il faut également modifier la fonction dib3000mc_read_word dans le même fichier (tout en haut) :
...
if (i2c_transfer(state->i2c_adap, msg, 2) != 2) {
dprintk("i2c read error on %d\n",reg);
+ return 0;
}
return (rb[0] << 8) | rb[1];
}
#267 Le 13/04/2007, à 21:18
- beug
Re : Décodeur TNT Intuix S800
bah je veux bien essayer ça mais il faut changer le dossier dib3000 qui se trouve dans v4l puis compiler ou changer dib3000 a l'endroit ou il est installé... si dib3000c s'installe a un autre endroit du pc, j'en sais trop rien moi?
parcque si c'est la 2eme solution, je ne sais pas ou il se trouve, enfin je ne le trouve pas quoi....
euh sinon faut mettre cette ligne "options dib3000mc debug=1" dans le fichier /etc/modprobe.d/options
ou pas?
merci
[edit]avec cette ligne:
mettre cette ligne "options dib3000mc debug=1" dans le fichier /etc/modprobe.d/options
rien de mieux chez moi pour l'instant
Dernière modification par beug (Le 14/04/2007, à 00:48)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#268 Le 14/04/2007, à 00:08
- beug
Re : Décodeur TNT Intuix S800
avec une s820, vu que cette clé est une hybride, je me demande si les explications de lo51 page 8 sont encore ok, ça donne ça chez moi
fabien50@beug:~/v4l-dvb-a80058519add$ sudo make menuconfig
make -C /home/fabien50/v4l-dvb-a80058519add/v4l menuconfig
make[1]: entrant dans le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
/lib/modules/2.6.20-14-generic/build/scripts/kconfig/mconf ./Kconfig
#
# configuration written to .config
#
*** End of Linux kernel configuration.
*** Execute 'make' to build the kernel or try 'make help'.
make[1]: quittant le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
fabien50@beug:~/v4l-dvb-a80058519add$ make
make -C /home/fabien50/v4l-dvb-a80058519add/v4l
make[1]: entrant dans le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
./scripts/make_myconfig.pl
make[1]: quittant le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
make[1]: entrant dans le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
creating symbolic links...
make -C /lib/modules/2.6.20-14-generic/build SUBDIRS=/home/fabien50/v4l-dvb-a80058519add/v4l modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.20-14-generic'
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dabusb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvbdev.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dmxdev.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_demux.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_filter.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_ca_en50221.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_frontend.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_net.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_ringbuffer.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb_math.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib0700_core.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib0700_devices.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dibusb-common.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dibusb-mb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dibusb-mc.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-firmware.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-init.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-urb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-i2c.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dvb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-remote.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/usb-urb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/bt87x.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-core.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-pll.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mb.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mc.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dibx000_common.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000m.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000p.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/mt2060.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-common.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mb.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mc.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dib0700.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/snd-bt87x.o
CC [M] /home/fabien50/v4l-dvb-a80058519add/v4l/btaudio.o
Building modules, stage 2.
MODPOST 16 modules
CC /home/fabien50/v4l-dvb-a80058519add/v4l/btaudio.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/btaudio.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dabusb.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dabusb.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mb.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mb.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mc.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib3000mc.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000m.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000m.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000p.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dib7000p.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dibx000_common.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dibx000_common.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-core.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-core.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-pll.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-pll.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dib0700.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dib0700.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-common.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-common.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mb.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mb.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mc.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb-dibusb-mc.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/dvb-usb.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/mt2060.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/mt2060.ko
CC /home/fabien50/v4l-dvb-a80058519add/v4l/snd-bt87x.mod.o
LD [M] /home/fabien50/v4l-dvb-a80058519add/v4l/snd-bt87x.ko
make[2]: Leaving directory `/usr/src/linux-headers-2.6.20-14-generic'
./scripts/rmmod.pl check
found 16 modules
make[1]: quittant le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
fabien50@beug:~/v4l-dvb-a80058519add$ sudo make install
make -C /home/fabien50/v4l-dvb-a80058519add/v4l install
make[1]: entrant dans le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
Stripping debug info from files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-usb files:
dvb-usb-dib0700.ko dvb-usb-dibusb-common.ko dvb-usb.ko dvb-usb-dibusb-mc.ko dvb-usb-dibusb-mb.ko
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/ttpci files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/et61x251 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/cpia2 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/cinergyT2 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/b2c2 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/ivtv files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends files:
dib7000m.ko mt2060.ko dibx000_common.ko dib3000mb.ko dib3000mc.ko dib7000p.ko dvb-pll.ko
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/bt8xx files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/cx88 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/pluto2 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/usbvideo files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/sn9c102 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/dvb-core files:
dvb-core.ko
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video files:
dabusb.ko
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/usbvision files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/common files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/em28xx files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/radio files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/pvrusb2 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/bt8xx files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/cx25840 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/ttusb-dec files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/ttusb-budget files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/pwc files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/saa7134 files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/ovcamchip files:
-e
Installing /lib/modules/2.6.20-14-generic/kernel/drivers/media/video/zc0301 files:
/sbin/depmod -a 2.6.20-14-generic
make[1]: quittant le répertoire « /home/fabien50/v4l-dvb-a80058519add/v4l »
fabien50@beug:~/v4l-dvb-a80058519add$Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#269 Le 14/04/2007, à 00:52
- beug
Re : Décodeur TNT Intuix S800
pludov a écrit :
Chez moi, le frontend n'apparait pas après un reboot. Il faut que je débranche et rebranche la clef pour débloquer la situation.
Il semble qu'il y ait une erreur de lecture systématique sur le bus I2C. (dixit le module avec le debug activé... Ajouter la ligne "options dib3000mc debug=1" au fichier /etc/modprobe.d/options est trés instructif !)J'ai ajouté plusieurs tentatives sur la lecture du registre 1025 et miracle, ça marche !
Il faut modifier le fichier dib3000mc.c pour ajouter les lignes suivantes (celles avec un +... Evidemment, il ne faut pas ajouter le + !)
static int dib3000mc_identify(struct dib3000mc_state *state)
{
u16 value;
+ int trycount = 3;
+ do {
+ value = dib3000mc_read_word(state, 1025);
+ trycount--;
+ } while(trycount && !value);if ((value != 0x5a00) && (value != 0x01b3)) {
dprintk("-E- DiB3000MC/P: wrong Vendor ID (read=0x%x)\n",value);
return -EREMOTEIO;
}Il faut également modifier la fonction dib3000mc_read_word dans le même fichier (tout en haut) :
...
if (i2c_transfer(state->i2c_adap, msg, 2) != 2) {
dprintk("i2c read error on %d\n",reg);
+ return 0;
}
return (rb[0] << 8) | rb[1];
}
le dib3000mcc qu'on trouve dans les modules
/lib/modules/2.6.20-14-generic/kernel/drivers/media/dvb/frontends/dib3000mc.ko
n'est pas un fichier enregistrable car il est binaire!
donc ça doit pas être là...
ps: je me fais mon monologue, désolé 
Dernière modification par beug (Le 14/04/2007, à 00:52)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#270 Le 14/04/2007, à 18:52
- beug
Re : Décodeur TNT Intuix S800
maj vers le noyau 2.6.20-15 et carte tnt toujours invisible
je ne tente même plus de compiler!!
peut être que d'ici 3 ou 4 version, ça fonctionnera sans rien faire, arf
quand je démarre ma distib et vu que j'ai enlevé "quiet" de ma ligne de boot, je vois en détail le démarrage et je vois bien également:
mouting local filesystem ----» failed
evidement ça c'est la carte tnt qui est branchée et non reconnue ! jamais vu ça moi, arf
[edit]
ok j'ai modifié le fichier dib3000c.c qui se trouve dans v4l / linux/media/ fontend avant de compiler a nouveau et de makeinstaller!! et......
toujours rien
fabien50@beug:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@vernadsky) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sat Apr 14 00:54:01 UTC 2007 (Ubuntu 2.6.20-15.25-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001feec000 end: 000000001ffec000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ffec000 size: 0000000000003000 end: 000000001ffef000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2
[ 0.000000] copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[ 0.000000] BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131052) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131052
[ 0.000000] HighMem 131052 -> 131052
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131052
[ 0.000000] On node 0 totalpages: 131052
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125965 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ASUS ) @ 0x000f5340
[ 0.000000] ACPI: RSDT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec000
[ 0.000000] ACPI: FADT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0
[ 0.000000] ACPI: BOOT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec030
[ 0.000000] ACPI: MADT (v001 ASUS P4PE-X 0x42302e31 MSFT 0x31313031) @ 0x1ffec058
[ 0.000000] ACPI: DSDT (v001 ASUS P4PE-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2405.595 MHz processor.
[ 15.984563] Built 1 zonelists. Total pages: 130029
[ 15.984568] Kernel command line: root=UUID=08c47c2e-e7f9-43fd-9e7d-fa73c3ebb463 ro quiet splash
[ 15.984745] mapped APIC to ffffd000 (fee00000)
[ 15.984748] mapped IOAPIC to ffffc000 (fec00000)
[ 15.984752] Enabling fast FPU save and restore... done.
[ 15.984755] Enabling unmasked SIMD FPU exception support... done.
[ 15.984771] Initializing CPU#0
[ 15.984867] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 15.986453] Console: colour VGA+ 80x25
[ 15.986882] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.987242] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.999335] Memory: 508736k/524208k available (1992k kernel code, 14928k reserved, 893k data, 328k init, 0k highmem)
[ 15.999346] virtual kernel memory layout:
[ 15.999347] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.999348] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.999349] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 15.999350] lowmem : 0xc0000000 - 0xdffec000 ( 511 MB)
[ 15.999352] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 15.999353] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 15.999354] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 15.999358] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.076727] Calibrating delay using timer specific routine.. 4815.09 BogoMIPS (lpj=9630185)
[ 16.076774] Security Framework v1.0.0 initialized
[ 16.076782] SELinux: Disabled at boot.
[ 16.076801] Mount-cache hash table entries: 512
[ 16.076962] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 16.076976] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 16.076979] CPU: L2 cache: 512K
[ 16.076981] CPU: Hyper-Threading is disabled
[ 16.076984] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 16.076996] Compat vDSO mapped to ffffe000.
[ 16.077000] Remapping vsyscall page to ffffe000
[ 16.077013] Checking 'hlt' instruction... OK.
[ 16.092805] SMP alternatives: switching to UP code
[ 16.093008] Freeing SMP alternatives: 11k freed
[ 16.093241] Early unpacking initramfs... done
[ 16.408038] ACPI: Core revision 20060707
[ 16.408985] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 16.410282] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 16.410329] Total of 1 processors activated (4815.09 BogoMIPS).
[ 16.410465] ENABLING IO-APIC IRQs
[ 16.410660] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.556018] Brought up 1 CPUs
[ 16.556294] Booting paravirtualized kernel on bare hardware
[ 16.556380] Time: 13:27:42 Date: 03/15/107
[ 16.556413] NET: Registered protocol family 16
[ 16.556520] EISA bus registered
[ 16.556526] ACPI: bus type pci registered
[ 16.558240] PCI: PCI BIOS revision 2.10 entry at 0xf1e50, last bus=2
[ 16.558243] PCI: Using configuration type 1
[ 16.558245] Setting up standard PCI resources
[ 16.573824] ACPI: Interpreter enabled
[ 16.573828] ACPI: Using IOAPIC for interrupt routing
[ 16.574593] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 16.574835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 16.575072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 16.575316] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 16.575553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 16.575781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 16.576021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 16.576266] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 16.576381] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.576388] PCI: Probing PCI hardware (bus 00)
[ 16.576763] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 16.577290] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 16.577292] * this clock source is slow. If you are sure your timer does not have
[ 16.577293] * this bug, please use "acpi_pm_good" to disable the workaround
[ 16.577339] PCI: Enabled i801 SMBus device
[ 16.577345] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 16.577349] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 16.577592] Boot video device is 0000:01:00.0
[ 16.577755] PCI: Transparent bridge - 0000:00:1e.0
[ 16.577784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.579101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 16.579252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 16.586945] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.586960] pnp: PnP ACPI init
[ 16.595979] pnp: PnP ACPI: found 15 devices
[ 16.595986] PnPBIOS: Disabled by ACPI PNP
[ 16.596042] PCI: Using ACPI for IRQ routing
[ 16.596047] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.602899] NET: Registered protocol family 8
[ 16.602901] NET: Registered protocol family 20
[ 16.603195] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[ 16.603199] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[ 16.603202] pnp: 00:02: ioport range 0xec00-0xec3f has been reserved
[ 16.603204] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 16.603222] pnp: 00:0e: ioport range 0x3f0-0x3f1 has been reserved
[ 16.603570] PCI: Bridge: 0000:00:01.0
[ 16.603572] IO window: disabled.
[ 16.603578] MEM window: de000000-dfefffff
[ 16.603582] PREFETCH window: dff00000-f7ffffff
[ 16.603588] PCI: Bridge: 0000:00:1e.0
[ 16.603589] IO window: disabled.
[ 16.603595] MEM window: dd000000-dd7fffff
[ 16.603599] PREFETCH window: disabled.
[ 16.603617] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.603649] NET: Registered protocol family 2
[ 16.635938] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 16.636035] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.636140] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 16.636195] TCP: Hash tables configured (established 16384 bind 8192)
[ 16.636198] TCP reno registered
[ 16.647966] checking if image is initramfs... it is
[ 17.285511] Freeing initrd memory: 6742k freed
[ 17.285762] Simple Boot Flag at 0x3a set to 0x1
[ 17.286030] audit: initializing netlink socket (disabled)
[ 17.286047] audit(1176643662.380:1): initialized
[ 17.286204] VFS: Disk quotas dquot_6.5.1
[ 17.286225] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.286281] io scheduler noop registered
[ 17.286284] io scheduler anticipatory registered
[ 17.286287] io scheduler deadline registered
[ 17.286297] io scheduler cfq registered (default)
[ 17.286603] isapnp: Scanning for PnP cards...
[ 17.640099] isapnp: No Plug & Play device found
[ 17.672533] Real Time Clock Driver v1.12ac
[ 17.672591] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.672720] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.672940] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.673718] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.674054] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.674384] mice: PS/2 mouse device common for all mice
[ 17.675045] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.675330] input: Macintosh mouse button emulation as /class/input/input0
[ 17.675372] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.675377] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 17.675635] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 17.675638] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 17.679105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.679113] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.679305] EISA: Probing bus 0 at eisa.0
[ 17.679344] EISA: Detected 0 cards.
[ 17.709412] TCP cubic registered
[ 17.709419] NET: Registered protocol family 1
[ 17.709444] Using IPI No-Shortcut mode
[ 17.709511] ACPI: (supports S0 S1 S4 S5)
[ 17.709561] Magic number: 3:418:483
[ 17.710135] Time: tsc clocksource has been installed.
[ 17.710162] Freeing unused kernel memory: 328k freed
[ 18.960638] Capability LSM initialized
[ 19.006360] ACPI: Invalid PBLK length [5]
[ 19.006398] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 19.559155] usbcore: registered new interface driver usbfs
[ 19.559182] usbcore: registered new interface driver hub
[ 19.559213] usbcore: registered new device driver usb
[ 19.560248] USB Universal Host Controller Interface driver v3.0
[ 19.560311] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.560325] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 19.560330] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.560496] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 19.560524] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 19.560645] usb usb1: configuration #1 chosen from 1 choice
[ 19.560681] hub 1-0:1.0: USB hub found
[ 19.560689] hub 1-0:1.0: 2 ports detected
[ 19.667122] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
[ 19.667136] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.667141] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.667172] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 19.667201] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
[ 19.667307] usb usb2: configuration #1 chosen from 1 choice
[ 19.667337] hub 2-0:1.0: USB hub found
[ 19.667349] hub 2-0:1.0: 2 ports detected
[ 19.732652] Floppy drive(s): fd0 is 1.44M
[ 19.774983] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.774997] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.775002] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.775030] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 19.775058] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 19.775163] usb usb3: configuration #1 chosen from 1 choice
[ 19.775201] hub 3-0:1.0: USB hub found
[ 19.775211] hub 3-0:1.0: 2 ports detected
[ 19.786487] FDC 0 is a post-1991 82077
[ 19.884672] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 19.884695] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 19.884699] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.884755] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 19.884803] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.884810] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 19.884821] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdd800000
[ 19.888685] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.888782] usb usb4: configuration #1 chosen from 1 choice
[ 19.888814] hub 4-0:1.0: USB hub found
[ 19.888824] hub 4-0:1.0: 6 ports detected
[ 20.001524] SCSI subsystem initialized
[ 20.007454] libata version 2.20 loaded.
[ 20.008914] b44.c:v1.01 (Jun 16, 2006)
[ 20.008939] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 20.012375] eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:73:32:a1
[ 20.014894] ata_piix 0000:00:1f.1: version 2.10ac1
[ 20.014913] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.014933] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.015242] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 20.015288] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 20.015310] scsi0 : ata_piix
[ 20.186505] ata1.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728
[ 20.186510] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 20.186513] ata1.00: 240121728 sectors, multi 16: LBA
[ 20.186519] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 20.198469] ata1.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728
[ 20.198472] ata1.00: configured for UDMA/33
[ 20.198486] scsi1 : ata_piix
[ 20.525770] ata2.00: ATAPI, max UDMA/33
[ 20.597445] usb 4-5: new high speed USB device using ehci_hcd and address 3
[ 20.697494] ata2.00: configured for UDMA/33
[ 20.697643] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 20.698286] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.00 PQ: 0 ANSI: 5
[ 20.717324] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[ 20.717488] sda: Write Protect is off
[ 20.717491] sda: Mode Sense: 00 3a 00 00
[ 20.717786] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.717863] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[ 20.717875] sda: Write Protect is off
[ 20.717878] sda: Mode Sense: 00 3a 00 00
[ 20.717898] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.717902] sda: sda1 sda2 <<6>usb 4-5: configuration #1 chosen from 1 choice
[ 20.745634] sda5 sda6 sda7 > sda3
[ 20.780985] sd 0:0:0:0: Attached scsi disk sda
[ 20.785202] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.785226] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 20.806381] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 20.806387] Uniform CD-ROM driver Revision: 3.20
[ 20.806636] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 20.984843] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 21.140255] Attempting manual resume
[ 21.140260] swsusp: Resume From Partition 8:7
[ 21.140262] PM: Checking swsusp image.
[ 21.146016] PM: Resume from disk failed.
[ 21.174909] kjournald starting. Commit interval 5 seconds
[ 21.174923] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.229565] usb 2-2: configuration #1 chosen from 1 choice
[ 34.856130] NET: Registered protocol family 17
[ 34.987443] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.998094] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.132308] iTCO_vendor_support: vendor-support=0
[ 35.133988] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 35.134093] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x6460)
[ 35.134116] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
[ 35.134157] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 35.161897] intel_rng: FWH not detected
[ 35.447552] Linux agpgart interface v0.102 (c) Dave Jones
[ 35.646830] agpgart: Detected an Intel 845G Chipset.
[ 35.649912] agpgart: AGP aperture is 64M @ 0xf8000000
[ 36.163478] input: PC Speaker as /class/input/input1
[ 36.232307] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 36.232312] b44: eth0: Flow control is off for TX and off for RX.
[ 36.264574] parport: PnPBIOS parport detected.
[ 36.264629] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 36.379083] nvidia: module license 'NVIDIA' taints kernel.
[ 36.662152] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.662485] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 36.671659] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 36.719812] usbcore: registered new interface driver hiddev
[ 36.761680] input: Silitek USB Multimedia Keyboard as /class/input/input3
[ 36.761743] input: USB HID v1.10 Keyboard [Silitek USB Multimedia Keyboard ] on usb-0000:00:1d.1-2
[ 36.795789] input: Silitek USB Multimedia Keyboard as /class/input/input4
[ 36.795905] input,hiddev96: USB HID v1.10 Device [Silitek USB Multimedia Keyboard ] on usb-0000:00:1d.1-2
[ 36.795933] usbcore: registered new interface driver usbhid
[ 36.795937] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 36.795946] usbcore: registered new interface driver xpad
[ 36.795949] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 36.831974] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 21
[ 36.832006] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 37.258496] intel8x0_measure_ac97_clock: measured 56058 usecs
[ 37.258501] intel8x0: clocking to 48000
[ 37.413999] lp0: using parport0 (interrupt-driven).
[ 37.447870] Adding 570268k swap on /dev/disk/by-uuid/b99ca247-6ad2-41d9-babe-24fadf10a180. Priority:-1 extents:1 across:570268k
[ 37.576650] EXT3 FS on sda3, internal journal
[ 39.377369] NET: Registered protocol family 10
[ 39.377482] lo: Disabled Privacy Extensions
[ 50.043531] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 50.128682] NTFS volume version 3.1.
[ 50.137646] eth0: no IPv6 routers present
[ 50.171023] NTFS volume version 3.1.
[ 51.223851] input: Power Button (FF) as /class/input/input5
[ 51.228876] ACPI: Power Button (FF) [PWRF]
[ 51.269208] input: Power Button (CM) as /class/input/input6
[ 51.274205] ACPI: Power Button (CM) [PWRB]
[ 51.294603] Using specific hotkey driver
[ 51.332430] No dock devices found.
[ 51.379709] ibm_acpi: ec object not found
[ 51.515346] pcc_acpi: loading...
[ 56.356226] ppdev: user-space parallel port driver
[ 57.873830] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 57.873853] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 57.873887] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 58.104047] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 58.104053] apm: overridden by ACPI.
[ 58.112109] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!
[ 58.112341] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it!
[ 58.112542] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it!
[ 66.028200] Bluetooth: Core ver 2.11
[ 66.028287] NET: Registered protocol family 31
[ 66.028290] Bluetooth: HCI device and connection manager initialized
[ 66.028294] Bluetooth: HCI socket layer initialized
[ 66.276885] Bluetooth: L2CAP ver 2.8
[ 66.276890] Bluetooth: L2CAP socket layer initialized
[ 66.435320] Bluetooth: RFCOMM socket layer initialized
[ 66.435337] Bluetooth: RFCOMM TTY layer initialized
[ 66.435339] Bluetooth: RFCOMM ver 1.8
[ 70.644471] eth0: no IPv6 routers present
[ 150.087977] usb 4-5: USB disconnect, address 3
[ 158.099002] usb 4-5: new high speed USB device using ehci_hcd and address 4
[ 158.240641] usb 4-5: configuration #1 chosen from 1 choice
[ 343.271431] usb 4-5: USB disconnect, address 4
[ 347.736191] usb 4-5: new high speed USB device using ehci_hcd and address 5
[ 347.868914] usb 4-5: configuration #1 chosen from 1 choice
fabien50@beug:~$celle là de ligne elle existait pas avant et elle semble en dire long sur adapter0 !!!
[ 58.112109] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!
le driver nvidia peut etre en rapport avec un port usb? non
en tous les cas, ma distrib fonctionne bien même si j'ai ce message d'erreur.
allo!! quelqu'un saurait-il me repondre?
Dernière modification par beug (Le 15/04/2007, à 13:46)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#271 Le 17/04/2007, à 20:54
- Markuso
Re : Décodeur TNT Intuix S800
Bonsoir à tous !
Et bien après moultes bouineries en tout genre j'ai réussi à avoir le :
DVB: registering frontend 0 (DiBcom 3000MC/P)...Et là je me dis : cool je vais pouvoir regarder la télé !
Et bien non pas du tout !
En trifouillant un temps soit peu je découvre avec stupeur un magnifique message d'attention via la célèbre commande dmesg :
**WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it!Bon soit un warning ... Quoi de plus normal... Je décide de poursuivre dans ma lancée
et après un scan ma foi concluant je décide de lancer mplayer pour regarder notre cher et tendre PPDA .... Et bien voici ce que le lancement de mplayer me donne :
mplayer dvb://TF1
MPlayer 2:1.0~rc1-0ubuntu9 (C) 2000-2006 MPlayer Team
CPU: Mobile AMD Sempron(tm) Processor 3000+ (Family: 15, Model: 44, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://TF1.
DVB CONFIGURATION IS EMPTY, exit
Failed to open dvb://TF1.
Exiting... (End of file)Bref la situation s'éclaircit après le passage de gros nuages noirs ....
Si vous avez des idées je suis preneur
A bientôt pour de nouvelles aventures geekesques!
Hors ligne
#272 Le 17/04/2007, à 21:45
- beug
Re : Décodeur TNT Intuix S800
arf, et moi qui me dit: " ça y est, markuso a trouvé la solution" , snif
j'ai eu le même genre d'erreur mais avec nvidia adapter0 ?! de quoi se tirer les cheveux, quel rapport avec le dvb
en tous les cas, ceci ne fonctionne pas chez moi et ça m'enerve grave
If you don't see dvb-directory, then something has failed. You don't need to create it, it comes automatically. With Ubuntu 6.06.1 the problem was that dvb-ttpci was not in the firmware directory. If you have all the modules active (listed in lsmod) but no /dev's to be found, check dmesg for any errors, ie: grep dvb /var/log/dmesg
provenant d'ici évidement:
http://linuxtv.org/wiki/index.php/How_to_install_DVB#Solution_for_new_kernels_.282.6.29
arf et moi je suis le dernier des geeks
je me prend la tete avec cette clé alors qu'elle est même pas visible avec un dmesg
bahourrrrhjftt !!! j'ai le bluetooth alors que j'ai même pas ça chez moi !! si c'est pas beau ça
bon allez
fabien50@beug:~$ dmesg | tail
[ 65.405226] Bluetooth: HCI device and connection manager initialized
[ 65.405230] Bluetooth: HCI socket layer initialized
[ 65.520985] Bluetooth: L2CAP ver 2.8
[ 65.520991] Bluetooth: L2CAP socket layer initialized
[ 65.681433] Bluetooth: RFCOMM socket layer initialized
[ 65.681452] Bluetooth: RFCOMM TTY layer initialized
[ 65.681455] Bluetooth: RFCOMM ver 1.8
[ 70.009408] eth0: no IPv6 routers present
[14028.227160] usb 4-5: new high speed USB device using ehci_hcd and address 3
[14028.371925] usb 4-5: configuration #1 chosen from 1 choiceDernière modification par beug (Le 17/04/2007, à 22:49)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#273 Le 18/04/2007, à 20:38
- beug
Re : Décodeur TNT Intuix S800
bah c'est quand même lourd de repasser sous windows a chaque fois que je veux mater la tnt sur mon pc
c'est la seule chose que je reproche vraiment a ma distrib kubuntu jusqu'ici, snif, des mouchoirs....
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne
#274 Le 19/04/2007, à 11:23
- Markuso
Re : Décodeur TNT Intuix S800
Enfin chez ça marchait très bien sous dapper et edgy ...
Apparemment mon problème est connu et a été répértorié comme bug "mineur" du noyau 2.6.20 :
http://209.85.129.104/search?q=cache:sq … cd=2&gl=fr
Hors ligne
#275 Le 23/04/2007, à 08:46
- beug
Re : Décodeur TNT Intuix S800
quelques news de mon coté:
j'ai fais une installation toute fraiche de feisty et là je vois que les modules dvb dont le fameux dib3000m.c est déjà dans ma distribution, cela voudrait donc dire qu'il n'y a plus rien à compiler!
sinon à part ça, ma clé n'est toujours pas visible
pas de /dev /dvb /adapter0
j'ai tenté un tas de trucs mais rien......
si quelqu'un a une solution pour faire apparaitre ce /dev /dvb , je suis preneur evidement.
@+
sans rien compiler:
fabien50@maitre:~$ modprobe -l | grep dvb
/lib/modules/2.6.20-15-generic/kernel/drivers/media/video/cx88/cx88-dvb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/video/video-buf-dvb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-ttusb2.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp7045.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-a800.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-digitv.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp702x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-umt-010.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-gp8psk.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dtt200u.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-cxusb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/cinergyT2/cinergyT2.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/dvb-ttpci.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/ttpci-eeprom.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/budget.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/budget-core.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/budget-av.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/budget-ci.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttpci/budget-patch.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/b2c2/b2c2-flexcop-pci.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/b2c2/b2c2-flexcop.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/b2c2/b2c2-flexcop-usb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/dvb-core/dvb-core.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/sp8870.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib3000mb.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/or51211.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/l64781.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/lgh06xf.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/lnbp21.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/cx24123.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dibx000_common.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tda826x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tda8083.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/lgdt330x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tda10086.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/s5h1420.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tda10021.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dvb-pll.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/mt312.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/stv0297.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/nxt200x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/isl6421.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/cx22702.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/mt352.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tda1004x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib7000m.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/cx22700.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib3000mc.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/zl10353.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/dib7000p.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/cx24110.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/tua6100.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/ves1x93.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/mt2060.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/bcm3510.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/stv0299.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/ves1820.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/or51132.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/nxt6000.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/frontends/sp887x.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttusb-dec/ttusb_dec.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/ttusb-dec/ttusbdecfe.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/pluto2/pluto2.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/bt8xx/dst_ca.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/bt8xx/dst.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko
/lib/modules/2.6.20-15-generic/kernel/drivers/media/dvb/bt8xx/bt878.koDernière modification par beug (Le 23/04/2007, à 08:48)
Si un jour, on te reproche que ton travail n'est pas un travail de professionnel, dis-toi bien que :
Des amateurs ont construit l'arche de Noé, et des professionnels le Titanic.!
Kub8.10 Kde4 Intel dual E2200, 4Go Ram, Ati HD3650 512mo, DD 640go, CM Msi
Hors ligne