#1 Le 15/09/2005, à 10:34
- Guill
Encore un probleme ATI TV OUT ... [9600Pro]
Bonjour,
Ca fait quelques jours que j'essaie de faire fonctionner un dual screen (LCD ACER AL707+ TV) sous Ubuntu (derniere version preview 5.10).
J'ai parcouru et rechercher dans un peu tous les forums Linux, mais rien n'y fait.
Donc, j'ai une Radeon 9600Pro 128 Mo. je voudrais acceder au 2 display separement (0.0 et 0.1), mais lorsque l'un marche l'autre non (ou alors en mode clone et pas franchement joli).
J'ai installer les drivers fglrx, tenter des dizaines de fglrxconfig, sans succes. Au mieux, j'ai le LCD en 1280 et la TV toute brouillee (on distingue quand meme qq chose lorsque la souris passe sur la TV).
Voici mon Xorg qui marchote (en jouant sur Option "MonitorLayout" "AUTO, CRT" ca passe d'un ecran a l'autre avec des resolutions etranges).
Y a t-il un specialiste dans la salle ?
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
# ===================== MONITOR DISPLAY (screen0)
Section "Monitor"
Identifier "Acer AL707"
Option "DPMS"
EndSection
Section "Device"
Identifier "ATILCD"
Driver "fglrx"
BusID "PCI:2:0:0"
Screen 0
Option "DesktopSetup" "0x00000000"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "yes"
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, CRT"
Option "IgnoreEDID" "off"
Option "HSync2" "31.5 - 37.9"
Option "VRefresh2" "50 - 70"
Option "ScreenOverlap" "0"
# === TV-out Management ===
#Option "NoTV" "no"
#Option "CursorShadow" "1"
#Option "TVStandard" "PAL-N"
#Option "ConnectedMonitor" "TV"
#Option "TVOutFormat" "Composite"
#Option "TVHSizeAdj" "-10"
#Option "TVVSizeAdj" "20"
#Option "TVHPosAdj" "15"
#Option "TVVPosAdj" "0"
#Option "VideoOverlay" "on"
#Option "TVHStartAdj" "0"
#Option "TVColorAdj" "0"
#Option "GammaCorrectionI" "0x06419064"
#Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "mtrr" "off"
EndSection
Section "Screen"
Identifier "DefaultScreen"
Device "ATILCD"
Monitor "Acer AL707"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
# ===================== TV DISPLAY (screen1)
Section "Monitor"
Identifier "tv"
Option "DPMS"
#HorizSync 10.0-30.0
#VertRefresh 40.0-60.0
EndSection
Section "Device"
Identifier "ATI TV"
Driver "fglrx"
BusID "PCI:2:0:1"
Screen 1
EndSection
Section "Screen"
Identifier "tvscreen"
Device "ATI TV"
Monitor "tv"
DefaultColorDepth 24
Subsection "Display"
Modes "800x600" "Interlace"
Depth 24
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "DefaultScreen"
Screen "tvscreen" LeftOf "DefaultScreen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSectionJe precise que j'ai effectue des tests dans tous les sens et que ce .conf est l'un des version testee ... je suis completement perdu et je commence a me decourager ...
Guillaume
#2 Le 15/09/2005, à 14:07
- dudie
Re : Encore un probleme ATI TV OUT ... [9600Pro]
bien ouai, moi j'ai les deux
un xorg pour le pc uniquement et l'autre pour pc + tv
mon xorg pour les deux écrans:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "NoTV" "no"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "mtrr" "off"
#
screen 0
EndSection
Section "Device"
Identifier "ATI_tvout"
Driver "fglrx"
Option "VideoOverlay" "on"
BusID "PCI:1:0:0"
Option "NoTV" "no"
screen 1
Option "DesktopSetup" "0x00000000"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === TV-out Management ===
Option "NoTV" "no"
#Option "CursorShadow" "1"
Option "TVStandard" "PAL-N"
Option "ConnectedMonitor" "TV"
Option "TVOutFormat" "Composite"
Option "TVHSizeAdj" "-10"
Option "TVVSizeAdj" "20"
Option "TVHPosAdj" "15"
Option "TVVPosAdj" "0"
#Option "VideoOverlay" "on"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "mtrr" "off"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "MaTv"
HorizSync 30.0-50.0
VertRefresh 50.0-60.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050" "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1920x1440" "1400x1050" "1800x1350" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "ecran_TV"
Device "ATI_tvout"
Monitor "MaTv"
DefaultColorDepth 24
Subsection "Display"
Modes "800x600" "Interlace"
Depth 24
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
Screen "ecran_TV" Below "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSectionDernière modification par dudie (Le 15/09/2005, à 14:08)
fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!
Hors ligne
#3 Le 15/09/2005, à 16:42
- GUill
Re : Encore un probleme ATI TV OUT ... [9600Pro]
OK, merci, je vais partir du tiens et tester ca ce soir ...
Guillaume
#4 Le 16/09/2005, à 08:47
- Guill
Re : Encore un probleme ATI TV OUT ... [9600Pro]
Bonjour,
Donc en m'aidant de ton xorg.conf, j'ai progresse un peu.
J'obtiens maintenant une belle image sur la tele, en 640x680 mais c'est un clone d'une partie de l'ecran du LCD 
C'est a dire que je vois ce qui est en haut a gauche de mon LCD en 1280x1024.
L'ideal serait donc un bon dual screen (comme sous Windows) mais je me contenterais d'un jolie mode clone MAIS EN PLEIN ECRAN SUR LA TV !!!
Voici mon Xorg.conf actuel.
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "ServerFlags"
# Option "Xinerama" "on"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATILCD"
Driver "fglrx"
BusID "PCI:2:0:0"
Option "NoTV" "no"
Option "MonitorLayout" "AUTO, AUTO"
Option "DesktopSetup" "0x00000200"
Chipset "RADEON 9600 PRO (RV360 4152)"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "yes"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "mtrr" "off"
#
screen 0
EndSection
Section "Device"
Identifier "ATI_tvout"
Driver "fglrx"
Option "VideoOverlay" "on"
BusID "PCI:2:0:0"
Option "NoTV" "no"
screen 1
Option "DesktopSetup" "0x00000200"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "yes"
# === TV-out Management ===
Option "NoTV" "no"
Chipset "RADEON 9600 PRO (RV360 4152)"
#Option "CursorShadow" "1"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "TV"
Option "TVOutFormat" "S-VIDEO"
Option "TVHSizeAdj" "-10"
Option "TVVSizeAdj" "20"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
#Option "VideoOverlay" "on"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "mtrr" "off"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "MaTv"
HorizSync 30.0-50.0
VertRefresh 50.0-60.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATILCD"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "ecran_TV"
Device "ATI_tvout"
Monitor "MaTv"
DefaultColorDepth 24
Subsection "Display"
Modes "640x480"
Depth 24
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
Screen "ecran_TV" LeftOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSectionPar rapport au tien, j'ai changer/ajoute :
Dans Device:
Option "MonitorLayout" "AUTO, AUTO"
Option "DesktopSetup" "0x00000200"
Chipset "RADEON 9600 PRO (RV360 4152)"
Option "no_dri" "yes" (dri ne semble pas fonctionner chez moi)
J'ai aussi trouve une aide interressante sur les options du Xorg.conf ici http://www.x.org/X11R6.8.2/doc/xorg.conf.5.html ... S'il existait la meme avec les options du driver ATI ce serait top !!!
Je suis pas encore sortie de l'auberge
Guillaume