Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#1 Le 17/10/2012, à 21:57

sinbad83

Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Bonjour à tous,
les choses ne s'arrangent pas avec Ubuntu 12.10 (http://forum.ubuntu-fr.org/viewtopic.php?id=1041291). Après appui sur une touche (pour ne pas passer en écran noir) et avoir choisi nomodeset, l'écran défile des lignes de commandes et se bloque en finale sur:

udev (123): timeout: killing '/sbin/modprobe -bv pci:v00001002d0000676sv0000103Csd0000166Cbc03sc00i00' (216)

Que faire pour installer ?

PS Le même CD-ROM a installé Quantal sans problème sur un Desktop.

Dernière modification par sinbad83 (Le 20/10/2012, à 09:51)


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#2 Le 18/10/2012, à 09:48

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Je précise que l'affichage graphique est certainement en cause comme auparavant pour 12.04.

$ lspci -nn | grep vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] [1002:6760]

La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#3 Le 18/10/2012, à 10:11

InAme19

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

salut,

j'ai parcouru vite fait ton sujet précédent.
Tu as quoi comme carte graphique?
Comment as tu installé les pilotes?

Il y a une époque j'avais beaucoup de soucis avec l'installation d'Ubuntu. Cela était dû aux pilotes de ma carte ATI.

Hors ligne

#4 Le 18/10/2012, à 18:29

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

A chaque fois que j'ai voulu installer l'un des deux pilotes FGLRX proposés par l'OS, je plantais, j'étais obligé de le supprimer.
Du coup, je suis avec le pilote brut d'installation, mais lequel est-ce ?
Voilà le retour de lsmod:

~$ lsmod
Module                  Size  Used by
rfcomm                 38139  0 
parport_pc             32114  0 
ppdev                  12849  0 
bnep                   17830  2 
bluetooth             158438  10 rfcomm,bnep
lp                     17455  0 
parport                40930  3 parport_pc,ppdev,lp
snd_hda_codec_hdmi     31775  1 
snd_hda_codec_idt      60251  1 
arc4                   12473  2 
snd_hda_intel          32765  3 
snd_hda_codec         109562  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
fglrx                4323583  0 
rt2800pci              18340  0 
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80845  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
rt2800lib              53264  1 rt2800pci
crc_ccitt              12595  1 rt2800lib
snd_seq_midi           13132  0 
hp_wmi                 13652  0 
rt2x00pci              14202  1 rt2800pci
snd_rawmidi            25424  1 snd_seq_midi
radeon                737891  0 
ttm                    65344  1 radeon
i915                  419110  0 
drm_kms_helper         45466  2 radeon,i915
rt2x00lib              48836  3 rt2800pci,rt2800lib,rt2x00pci
joydev                 17393  0 
sparse_keymap          13658  1 hp_wmi
drm                   197599  4 radeon,ttm,i915,drm_kms_helper
mac80211              436455  3 rt2800lib,rt2x00pci,rt2x00lib
cfg80211              178679  2 rt2x00lib,mac80211
snd_seq_midi_event     14475  1 snd_seq_midi
psmouse                86486  0 
serio_raw              13027  0 
uvcvideo               67203  0 
videodev               86588  1 uvcvideo
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
mac_hid                13077  0 
wmi                    18744  1 hp_wmi
i2c_algo_bit           13199  2 radeon,i915
eeprom_93cx6           12653  1 rt2800pci
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
video                  19068  1 i915
snd                    62064  16 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rts_pstor             353215  0 
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
mei                    36570  0 
usbhid                 41906  0 
hid                    77367  1 usbhid
r8169                  56321  0 

J'ajoute le dmesg (désolé, c'est hyper-long):

~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-32-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 (Ubuntu 3.2.0-32.51-generic-pae 3.2.30)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[    0.000000]  BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[    0.000000]  BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[    0.000000]  BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC      /1670, BIOS F.42 12/08/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09D000000 mask FFF000000 uncachable
[    0.000000]   3 base 09E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FE0000000 write-back
[    0.000000]   7 base 15FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00fe1b0] fe1b0
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364e6000 - 3726b000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 9cffe120 0008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 9cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 9cfec000 0C0EC (v01 HP     1670     00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 9cf6c000 00040
[    0.000000] ACPI: ASF! 9cffd000 000A5 (v32 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 9cffb000 00038 (v01 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 9cffa000 0008C (v02 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 9cff9000 0003C (v01 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 9cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MSDM 9cfea000 00055 (v03 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 9cfe9000 00D52 (v01 HP     1670     00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 9cfe7000 00028 (v01 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 9cfe4000 00034 (v07 HP     1670     00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 9cfe3000 00804 (v01 HP     1670     00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 9cfe2000 00996 (v01 HP     1670     00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 9cfdc000 0219F (v01 HP     1670     00001000 INTL 20100121)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4738MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0015fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0009ce3f
[    0.000000]     0: 0x0009cfff -> 0x0009d000
[    0.000000]     0: 0x00100000 -> 0x0015fe00
[    0.000000] On node 0 totalpages: 1035213
[    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f38e6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 9477 pages used for memmap
[    0.000000]   HighMem zone: 797501 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1023952
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic-pae root=UUID=d4e1ff9b-9e57-4925-9ec5-0ac57081d5e2 ro recovery nomodeset
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 23060224 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0015fe00)
[    0.000000] Memory: 4047736k/5765120k available (5820k kernel code, 93116k reserved, 2844k data, 740k init, 3227912k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
[    0.000000]       .data : 0xc15af13c - 0xc1876280   (2844 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15af13c   (5820 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2494.348 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.69 BogoMIPS (lpj=9977392)
[    0.000074] pid_max: default: 32768 minimum: 301
[    0.000126] Security Framework initialized
[    0.000170] AppArmor: AppArmor initialized
[    0.000203] Yama: becoming mindful.
[    0.000275] Mount-cache hash table entries: 512
[    0.000418] Initializing cgroup subsys cpuacct
[    0.000456] Initializing cgroup subsys memory
[    0.000494] Initializing cgroup subsys devices
[    0.000529] Initializing cgroup subsys freezer
[    0.000563] Initializing cgroup subsys blkio
[    0.000600] Initializing cgroup subsys perf_event
[    0.000656] CPU: Physical Processor ID: 0
[    0.000689] CPU: Processor Core ID: 0
[    0.000725] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000726] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000801] mce: CPU supports 7 MCE banks
[    0.000842] CPU0: Thermal monitoring handled by SMI
[    0.000848] using mwait in idle threads.
[    0.002963] ACPI: Core revision 20110623
[    0.022108] ftrace: allocating 26564 entries in 52 pages
[    0.043650] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044171] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083890] CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz stepping 07
[    0.188065] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.188279] PEBS disabled due to CPU errata.
[    0.188351] ... version:                3
[    0.188421] ... bit width:              48
[    0.188488] ... generic registers:      4
[    0.188556] ... value mask:             0000ffffffffffff
[    0.188629] ... max period:             000000007fffffff
[    0.188702] ... fixed-purpose events:   3
[    0.188771] ... event mask:             000000070000000f
[    0.189210] NMI watchdog enabled, takes one hw-pmu counter.
[    0.189465] CPU 1 irqstacks, hard=f7558000 soft=f755a000
[    0.189470] Booting Node   0, Processors  #1
[    0.189557] smpboot cpu 1: start_ip = 99000
[    0.200388] Initializing CPU#1
[    0.280002] CPU1: Thermal monitoring handled by SMI
[    0.300106] NMI watchdog enabled, takes one hw-pmu counter.
[    0.300435] CPU 2 irqstacks, hard=f7566000 soft=f7568000
[    0.300440]  #2
[    0.300483] smpboot cpu 2: start_ip = 99000
[    0.311226] Initializing CPU#2
[    0.387856] CPU2: Thermal monitoring handled by SMI
[    0.408009] NMI watchdog enabled, takes one hw-pmu counter.
[    0.408315] CPU 3 irqstacks, hard=f757c000 soft=f757e000
[    0.408320]  #3
[    0.408361] smpboot cpu 3: start_ip = 99000
[    0.419103] Initializing CPU#3
[    0.495713] CPU3: Thermal monitoring handled by SMI
[    0.515779] NMI watchdog enabled, takes one hw-pmu counter.
[    0.515970] Brought up 4 CPUs
[    0.516037] Total of 4 processors activated (19954.74 BogoMIPS).
[    0.525569] devtmpfs: initialized
[    0.525933] EVM: security.selinux
[    0.525999] EVM: security.SMACK64
[    0.526066] EVM: security.capability
[    0.526190] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)
[    0.528748] print_constraints: dummy: 
[    0.528865] RTC time: 18:29:30, date: 10/18/12
[    0.529022] NET: Registered protocol family 16
[    0.529314] Trying to unpack rootfs image as initramfs...
[    0.529343] EISA bus registered
[    0.529473] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.530279] ACPI: bus type pci registered
[    0.530512] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.530619] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.530696] PCI: Using MMCONFIG for extended config space
[    0.530770] PCI: Using configuration type 1 for base access
[    0.533472] bio: create slab <bio-0> at 0
[    0.533740] ACPI: Added _OSI(Module Device)
[    0.533812] ACPI: Added _OSI(Processor Device)
[    0.533882] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.533953] ACPI: Added _OSI(Processor Aggregator Device)
[    0.538970] ACPI: EC: Look up EC in DSDT
[    0.543790] ACPI: Executed 1 blocks of module-level executable AML code
[    0.615572] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.616856] ACPI: SSDT 9ce70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.618312] ACPI: Dynamic OEM Table Load:
[    0.618453] ACPI: SSDT   (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.648168] ACPI: SSDT 9ce71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.649724] ACPI: Dynamic OEM Table Load:
[    0.649864] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.679694] ACPI: SSDT 9ce6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.681126] ACPI: Dynamic OEM Table Load:
[    0.681265] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.752212] ACPI: Interpreter enabled
[    0.752310] ACPI: (supports S0 S3 S4 S5)
[    0.752580] ACPI: Using IOAPIC for interrupt routing
[    0.763672] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.764143] ACPI: No dock devices found.
[    0.764213] HEST: Table not found.
[    0.764289] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.765267] \_SB_.PCI0:_OSC invalid UUID
[    0.765271] _OSC request data:1 8 1f 
[    0.765283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.766874] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.766953] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.767032] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.767133] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[    0.767256] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    0.767372] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.767467] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.767475] pci 0000:00:01.0: PME# disabled
[    0.767530] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[    0.767561] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.767580] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.767594] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
[    0.767740] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.767793] pci 0000:00:16.0: reg 10: [mem 0xc3604000-0xc360400f 64bit]
[    0.767960] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.767969] pci 0000:00:16.0: PME# disabled
[    0.768045] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.768516] pci 0000:00:1a.0: reg 10: [mem 0xc3609000-0xc36093ff]
[    0.771020] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.771029] pci 0000:00:1a.0: PME# disabled
[    0.771086] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.771127] pci 0000:00:1b.0: reg 10: [mem 0xc3600000-0xc3603fff 64bit]
[    0.771311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.771321] pci 0000:00:1b.0: PME# disabled
[    0.771372] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.771562] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.771572] pci 0000:00:1c.0: PME# disabled
[    0.771626] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.771815] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.771825] pci 0000:00:1c.1: PME# disabled
[    0.771879] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    0.772068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.772077] pci 0000:00:1c.2: PME# disabled
[    0.772151] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.772585] pci 0000:00:1d.0: reg 10: [mem 0xc3608000-0xc36083ff]
[    0.775089] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.775099] pci 0000:00:1d.0: PME# disabled
[    0.775148] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    0.775408] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    0.775459] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
[    0.775483] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
[    0.775505] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
[    0.775527] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
[    0.775548] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
[    0.775571] pci 0000:00:1f.2: reg 24: [mem 0xc3607000-0xc36077ff]
[    0.775698] pci 0000:00:1f.2: PME# supported from D3hot
[    0.775708] pci 0000:00:1f.2: PME# disabled
[    0.775754] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.775793] pci 0000:00:1f.3: reg 10: [mem 0xc3605000-0xc36050ff 64bit]
[    0.775850] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
[    0.775999] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300
[    0.776036] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.776066] pci 0000:01:00.0: reg 18: [mem 0xc2600000-0xc261ffff 64bit]
[    0.776086] pci 0000:01:00.0: reg 20: [io  0x4000-0x40ff]
[    0.776122] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.776207] pci 0000:01:00.0: supports D1 D2
[    0.783315] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.783393] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.783400] pci 0000:00:01.0:   bridge window [mem 0xc2600000-0xc35fffff]
[    0.783411] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.783577] pci 0000:02:00.0: [1814:5390] type 0 class 0x000280
[    0.783637] pci 0000:02:00.0: reg 10: [mem 0xc2500000-0xc250ffff]
[    0.791326] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.791409] pci 0000:00:1c.0:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.791564] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[    0.791600] pci 0000:03:00.0: reg 10: [io  0x3000-0x30ff]
[    0.791661] pci 0000:03:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.791700] pci 0000:03:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.791860] pci 0000:03:00.0: supports D1 D2
[    0.791865] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.791876] pci 0000:03:00.0: PME# disabled
[    0.799298] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.799377] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.799398] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.799549] pci 0000:04:00.0: [10ec:5209] type 0 class 0x00ff00
[    0.799587] pci 0000:04:00.0: reg 10: [mem 0xc1500000-0xc1500fff]
[    0.799838] pci 0000:04:00.0: supports D1 D2
[    0.799843] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.799854] pci 0000:04:00.0: PME# disabled
[    0.807288] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.807367] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.807376] pci 0000:00:1c.2:   bridge window [mem 0xc1500000-0xc24fffff]
[    0.807392] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[    0.807440] pci_bus 0000:00: on NUMA node 0
[    0.807450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.807957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.808053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.808158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.808291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.808522] \_SB_.PCI0:_OSC invalid UUID
[    0.808526] _OSC request data:1 1f 1f 
[    0.808537]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.808697] \_SB_.PCI0:_OSC invalid UUID
[    0.808700] _OSC request data:1 0 1d 
[    0.808710]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.808811] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.814940] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.815574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.816190] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.816804] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.817421] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.818132] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.818839] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.819484] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.820339] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.820456] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.820560] vgaarb: loaded
[    0.820625] vgaarb: bridge control possible 0000:01:00.0
[    0.820698] vgaarb: no bridge control possible 0000:00:02.0
[    0.821027] i2c-core: driver [aat2870] using legacy suspend method
[    0.821103] i2c-core: driver [aat2870] using legacy resume method
[    0.821354] SCSI subsystem initialized
[    0.821533] libata version 3.00 loaded.
[    0.821652] usbcore: registered new interface driver usbfs
[    0.821749] usbcore: registered new interface driver hub
[    0.821888] usbcore: registered new device driver usb
[    0.822163] PCI: Using ACPI for IRQ routing
[    0.840101] PCI: pci_cache_line_size set to 64 bytes
[    0.840283] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.840289] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff 
[    0.840298] reserve RAM buffer: 000000009d000000 - 000000009fffffff 
[    0.840303] reserve RAM buffer: 000000015fe00000 - 000000015fffffff 
[    0.840537] NetLabel: Initializing
[    0.840606] NetLabel:  domain hash size = 128
[    0.840674] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.840763] NetLabel:  unlabeled traffic allowed by default
[    0.840949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.841351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.843465] Switching to clocksource hpet
[    0.861017] AppArmor: AppArmor Filesystem Enabled
[    0.861138] pnp: PnP ACPI init
[    0.861234] ACPI: bus type pnp registered
[    0.862362] pnp 00:00: [bus 00-fe]
[    0.862370] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.862375] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.862381] pnp 00:00: [io  0x0d00-0xffff window]
[    0.862387] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.862393] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.862398] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.862403] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.862409] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.862414] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.862419] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.862425] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.862430] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.862435] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.862440] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.862446] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.862451] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.862456] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.862462] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[    0.862594] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.862652] pnp 00:01: [io  0x0000-0x001f]
[    0.862657] pnp 00:01: [io  0x0081-0x0091]
[    0.862662] pnp 00:01: [io  0x0093-0x009f]
[    0.862666] pnp 00:01: [io  0x00c0-0x00df]
[    0.862675] pnp 00:01: [dma 4]
[    0.862737] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.862759] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.862819] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.862988] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.863052] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.863079] pnp 00:04: [io  0x00f0]
[    0.863097] pnp 00:04: [irq 13]
[    0.863160] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.863190] pnp 00:05: [io  0x002e-0x002f]
[    0.863195] pnp 00:05: [io  0x004e-0x004f]
[    0.863199] pnp 00:05: [io  0x0061]
[    0.863204] pnp 00:05: [io  0x0063]
[    0.863208] pnp 00:05: [io  0x0065]
[    0.863212] pnp 00:05: [io  0x0067]
[    0.863216] pnp 00:05: [io  0x0070]
[    0.863220] pnp 00:05: [io  0x0080]
[    0.863225] pnp 00:05: [io  0x0092]
[    0.863229] pnp 00:05: [io  0x00b2-0x00b3]
[    0.863234] pnp 00:05: [io  0x0680-0x069f]
[    0.863239] pnp 00:05: [io  0x1004-0x1013]
[    0.863243] pnp 00:05: [io  0xffff]
[    0.863248] pnp 00:05: [io  0xffff]
[    0.863252] pnp 00:05: [io  0x0400-0x0453]
[    0.863257] pnp 00:05: [io  0x0454-0x0457]
[    0.863261] pnp 00:05: [io  0x0458-0x047f]
[    0.863266] pnp 00:05: [io  0x0500-0x057f]
[    0.863271] pnp 00:05: [io  0x164e-0x164f]
[    0.863275] pnp 00:05: [io  0x0380-0x0387]
[    0.863280] pnp 00:05: [io  0x0068-0x006f]
[    0.863406] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.863483] system 00:05: [io  0x1004-0x1013] has been reserved
[    0.863580] system 00:05: [io  0xffff] has been reserved
[    0.863656] system 00:05: [io  0xffff] has been reserved
[    0.863729] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.863804] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.863882] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.863959] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.864035] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.864111] system 00:05: [io  0x0380-0x0387] has been reserved
[    0.864189] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.864211] pnp 00:06: [io  0x0070-0x0077]
[    0.864223] pnp 00:06: [irq 8]
[    0.864291] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.864333] pnp 00:07: [io  0x0060]
[    0.864337] pnp 00:07: [io  0x0064]
[    0.864347] pnp 00:07: [irq 1]
[    0.864428] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.864468] pnp 00:08: [irq 12]
[    0.864553] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active)
[    0.864814] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.864819] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[    0.864824] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.864829] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.864834] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.864839] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.864844] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    0.864849] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.864854] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.864859] pnp 00:09: [mem 0x9fa00000-0x9fa00fff]
[    0.864974] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.865053] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.865132] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.865211] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.865291] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.865369] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.865448] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.865528] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.865608] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.865687] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.865768] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.866302] pnp 00:0a: [mem 0x20000000-0x201fffff]
[    0.866307] pnp 00:0a: [mem 0x40000000-0x401fffff]
[    0.866447] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[    0.866529] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[    0.866610] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.866657] pnp: PnP ACPI: found 11 devices
[    0.866727] ACPI: ACPI bus type pnp unregistered
[    0.866798] PnPBIOS: Disabled by ACPI PNP
[    0.906961] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.907075] PCI: max bus depth: 1 pci_try_num: 2
[    0.907154] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref]
[    0.907253] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.907328] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.907409] pci 0000:00:01.0:   bridge window [mem 0xc2600000-0xc35fffff]
[    0.907504] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.907610] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.907689] pci 0000:00:1c.0:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.907783] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.907859] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.907947] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.908056] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.908131] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.908214] pci 0000:00:1c.2:   bridge window [mem 0xc1500000-0xc24fffff]
[    0.908299] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[    0.908440] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.908523] pci 0000:00:01.0: setting latency timer to 64
[    0.908547] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.908627] pci 0000:00:1c.0: setting latency timer to 64
[    0.908642] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.908726] pci 0000:00:1c.1: setting latency timer to 64
[    0.908749] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.908832] pci 0000:00:1c.2: setting latency timer to 64
[    0.908842] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.908848] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.908854] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.908860] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.908866] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.908871] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff]
[    0.908877] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.908883] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff]
[    0.908889] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.908895] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.908901] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.908906] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc24fffff]
[    0.908912] pci_bus 0000:04: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
[    0.908989] NET: Registered protocol family 2
[    0.909192] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.909638] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.910336] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.910676] TCP: Hash tables configured (established 131072 bind 65536)
[    0.910755] TCP reno registered
[    0.910825] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.910907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.911118] NET: Registered protocol family 1
[    0.911214] pci 0000:00:02.0: Boot video device
[    0.911238] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.927455] pci 0000:00:1a.0: PCI INT A disabled
[    0.927574] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.943428] pci 0000:00:1d.0: PCI INT A disabled
[    0.943556] PCI: CLS 64 bytes, default 64
[    0.943567] Simple Boot Flag at 0x44 set to 0x1
[    0.944778] audit: initializing netlink socket (disabled)
[    0.944867] type=2000 audit(1350584970.764:1): initialized
[    1.005255] highmem bounce pool size: 64 pages
[    1.005339] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.010616] VFS: Disk quotas dquot_6.5.2
[    1.010825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.012170] fuse init (API version 7.17)
[    1.012468] msgmni has been set to 1601
[    1.013395] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.013556] io scheduler noop registered
[    1.013628] io scheduler deadline registered
[    1.013708] io scheduler cfq registered (default)
[    1.013989] pcieport 0000:00:01.0: setting latency timer to 64
[    1.014059] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.014513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.014640] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.014874] intel_idle: MWAIT substates: 0x21120
[    1.014879] intel_idle: v0.4 model 0x2A
[    1.014882] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.015212] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.015621] ACPI: AC Adapter [ACAD] (off-line)
[    1.016066] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.016518] ACPI: Lid Switch [LID0]
[    1.016692] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.016797] ACPI: Power Button [PWRB]
[    1.016979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.017081] ACPI: Power Button [PWRF]
[    1.023404] [Firmware Bug]: Invalid critical threshold (0)
[    1.025001] thermal LNXTHERM:00: registered as thermal_zone0
[    1.025079] ACPI: Thermal Zone [TZ01] (50 C)
[    1.025894] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.026014] ACPI: Battery Slot [BAT0] (battery present)
[    1.026161] ERST: Table is not found!
[    1.026262] GHES: HEST is not enabled!
[    1.026488] isapnp: Scanning for PnP cards...
[    1.026586] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.086508] ACPI: Battery Slot [BAT0] (battery present)
[    1.316208] Freeing initrd memory: 13844k freed
[    1.380743] isapnp: No Plug & Play device found
[    1.459543] Linux agpgart interface v0.103
[    1.459867] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.460075] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.462692] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.463045] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.466633] brd: module loaded
[    1.468522] loop: module loaded
[    1.468883] ahci 0000:00:1f.2: version 3.0
[    1.468926] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.469101] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.482739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    1.482845] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.482953] ahci 0000:00:1f.2: setting latency timer to 64
[    1.491908] scsi0 : ahci
[    1.492200] scsi1 : ahci
[    1.492427] scsi2 : ahci
[    1.492651] scsi3 : ahci
[    1.492871] scsi4 : ahci
[    1.493088] scsi5 : ahci
[    1.493402] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 41
[    1.493502] ata2: DUMMY
[    1.493566] ata3: DUMMY
[    1.493630] ata4: DUMMY
[    1.493695] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 41
[    1.493791] ata6: DUMMY
[    1.494842] Fixed MDIO Bus: probed
[    1.494953] tun: Universal TUN/TAP device driver, 1.6
[    1.495026] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.495210] PPP generic driver version 2.4.2
[    1.495513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.495621] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.495734] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.495742] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.495901] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.496041] ehci_hcd 0000:00:1a.0: debug port 2
[    1.499986] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.500020] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3609000
[    1.514674] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.515038] hub 1-0:1.0: USB hub found
[    1.515113] hub 1-0:1.0: 2 ports detected
[    1.515311] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.515415] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.515423] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.515589] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.515724] ehci_hcd 0000:00:1d.0: debug port 2
[    1.519675] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.519705] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xc3608000
[    1.534649] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.534985] hub 2-0:1.0: USB hub found
[    1.535058] hub 2-0:1.0: 2 ports detected
[    1.535261] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.535364] uhci_hcd: USB Universal Host Controller Interface driver
[    1.535549] usbcore: registered new interface driver libusual
[    1.535729] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.545493] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.545575] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.545891] mousedev: PS/2 mouse device common for all mice
[    1.546400] rtc_cmos 00:06: RTC can wake from S4
[    1.546693] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.546810] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.547016] device-mapper: uevent: version 1.0.3
[    1.547252] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.547428] EISA: Probing bus 0 at eisa.0
[    1.547497] EISA: Cannot allocate resource for mainboard
[    1.547570] Cannot allocate resource for EISA slot 1
[    1.547642] Cannot allocate resource for EISA slot 2
[    1.547715] Cannot allocate resource for EISA slot 3
[    1.547786] Cannot allocate resource for EISA slot 4
[    1.547858] Cannot allocate resource for EISA slot 5
[    1.547930] Cannot allocate resource for EISA slot 6
[    1.548000] Cannot allocate resource for EISA slot 7
[    1.548072] Cannot allocate resource for EISA slot 8
[    1.548144] EISA: Detected 0 cards.
[    1.548226] cpufreq-nforce2: No nForce2 chipset.
[    1.548640] cpuidle: using governor ladder
[    1.549246] cpuidle: using governor menu
[    1.549316] EFI Variables Facility v0.08 2004-May-17
[    1.549870] TCP cubic registered
[    1.550215] NET: Registered protocol family 10
[    1.551410] NET: Registered protocol family 17
[    1.551498] Registering the dns_resolver key type
[    1.551602] Using IPI No-Shortcut mode
[    1.551968] PM: Hibernation image not present or could not be loaded.
[    1.552000] registered taskstats version 1
[    1.558248] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.568937]   Magic number: 0:214:494
[    1.569166] rtc_cmos 00:06: setting system clock to 2012-10-18 18:29:31 UTC (1350584971)
[    1.571111] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.571187] EDD information not available.
[    1.810399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.810529] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.812293] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    1.812383] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.813712] ata5.00: ATAPI: hp      DVD A  DS8A8SH, KH61, max UDMA/100
[    1.814318] ata1.00: configured for UDMA/100
[    1.814853] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    1.815401] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.815411] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.815421] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.815635] sd 0:0:0:0: [sda] Write Protect is off
[    1.815643] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.815729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.820275] ata5.00: configured for UDMA/100
[    1.826371] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.828238] scsi 4:0:0:0: CD-ROM            hp       DVD A  DS8A8SH   KH61 PQ: 0 ANSI: 5
[    1.843890] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.844000] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.844406] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.844629] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.942198] Refined TSC clocksource calibration: 2494.333 MHz.
[    1.942291] Switching to clocksource tsc
[    1.959501] hub 1-1:1.0: USB hub found
[    1.959743] hub 1-1:1.0: 6 ports detected
[    2.070052] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.180582]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    2.183191] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.183567] Freeing unused kernel memory: 740k freed
[    2.184007] Write protecting the kernel text: 5824k
[    2.184114] Write protecting the kernel read-only data: 2376k
[    2.184188] NX-protecting the kernel data: 4416k
[    2.202591] hub 2-1:1.0: USB hub found
[    2.202748] hub 2-1:1.0: 6 ports detected
[    2.225452] udevd[106]: starting version 175
[    2.337297] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.337437] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.337610] r8169 0000:03:00.0: setting latency timer to 64
[    2.337745] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    2.339227] r8169 0000:03:00.0: eth0: RTL8105e at 0xf8446000, ec:9a:74:5e:74:79, XID 00a00000 IRQ 42
[    2.473541] usb 2-1.2: new full-speed USB device number 3 using ehci_hcd
[    2.580483] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[    2.580870] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input0
[    2.586627] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
[    2.587231] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input1
[    2.603302] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input6
[    2.603997] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input2
[    2.604198] usbcore: registered new interface driver usbhid
[    2.604276] usbhid: USB HID core driver
[    2.645309] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
[    3.514799] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.288790] udevd[302]: starting version 175
[    6.716964] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    6.717956] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.718763] mei 0000:00:16.0: setting latency timer to 64
[    6.718888] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[    6.784188] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[    6.786449] Initializing Realtek PCIE storage driver...
[    6.786590] rts_pstor 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.786784] Resource length: 0x1000
[    6.786882] Original address: 0xc1500000, remapped address: 0xf841c000
[    6.786961] pci->irq = 18
[    6.787027] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[    6.787143] rts_pstor 0000:04:00.0: setting latency timer to 64
[    6.987818] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[    6.988127] rts_pstor: waiting for device to settle before scanning
[    7.041330] wmi: Mapper loaded
[    7.124158] Linux video capture interface: v2.00
[    7.137529] uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
[    7.140658] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[    7.140909] usbcore: registered new interface driver uvcvideo
[    7.140982] USB Video Class driver (1.1.1)
[    7.301865] cfg80211: Calling CRDA to update world regulatory domain
[    7.355522] [drm] Initialized drm 1.1.0 20060810
[    7.470127] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.470218] pci 0000:00:02.0: setting latency timer to 64
[    7.511037] pci 0000:00:02.0: irq 44 for MSI/MSI-X
[    7.511052] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.511133] [drm] No driver support for vblank timestamp query.
[    7.514391] acpi device:1a: registered as cooling_device4
[    7.517230] acpi device:1b: registered as cooling_device5
[    7.517552] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input8
[    7.517835] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    7.549830] acpi device:20: registered as cooling_device6
[    7.550393] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[    7.550624] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.550791] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.567525] [drm] VGACON disable radeon kernel modesetting.
[    7.568304] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    7.568390] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.568476] pci 0000:01:00.0: setting latency timer to 64
[    7.568755] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.568833] [drm] No driver support for vblank timestamp query.
[    7.568911] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 1
[    7.647269] input: HP WMI hotkeys as /devices/virtual/input/input10
[    7.821501] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    7.821617] Disabling lock debugging due to kernel taint
[    7.952946] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.953083] rt2800pci 0000:02:00.0: setting latency timer to 64
[    7.955540] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.955552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955561] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.955571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955579] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.955589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955597] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.955606] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955615] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.955625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955632] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.955639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955644] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.955650] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955655] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.955661] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955666] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.955672] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955677] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.955683] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955688] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.955695] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    7.955700] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    7.955707] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    7.955712] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    7.955718] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    7.955723] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    7.955729] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    7.983050] [fglrx] Maximum main memory to use for locked dma buffers: 3805 MBytes.
[    7.983702] [fglrx]   vendor: 1002 device: 6760 count: 1
[    7.984583] [fglrx] ioport: bar 4, base 0x4000, size: 0x100
[    7.984668] pci 0000:01:00.0: setting latency timer to 64
[    7.985004] [fglrx] Kernel PAT support is enabled
[    7.985109] [fglrx] module loaded - fglrx 9.0.2 [Aug 15 2012] with 1 minors
[    7.986394] rts_pstor: device scan complete
[    7.986918] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    7.987199] Bad LUN (0:1)
[    7.988182] Bad target number (1:0)
[    7.988446] Bad target number (2:0)
[    7.988687] Bad target number (3:0)
[    7.988892] Bad target number (4:0)
[    7.989095] Bad target number (5:0)
[    7.989295] Bad target number (6:0)
[    7.989491] Bad target number (7:0)
[    7.990287] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.990471] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.045099] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.045333] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    8.045396] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.141961] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.141972] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.141978] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.141984] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.141990] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.141996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142001] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.142008] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142013] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.142019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142024] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.142030] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142035] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.142041] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142046] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.142052] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142057] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.142063] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142094] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.142101] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142106] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.142112] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142117] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    8.142124] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.142129] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    8.142135] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.142140] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    8.142146] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.142154] cfg80211: World regulatory domain updated:
[    8.142231] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.142332] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142433] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.142534] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.142635] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.142736] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.176630] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    8.203667] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.205038] Registered led device: rt2800pci-phy0::radio
[    8.205111] Registered led device: rt2800pci-phy0::assoc
[    8.205191] Registered led device: rt2800pci-phy0::quality
[    8.227596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    8.384209] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.384227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.444767] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.444943] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.445212] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.445453] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   15.819473] lp: driver loaded but no devices found
[   23.695770] Adding 2096124k swap on /dev/sda7.  Priority:-1 extents:1 across:2096124k 
[   24.773126] init: udev-fallback-graphics main process (1206) terminated with status 1
[   25.265793] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   25.570740] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   26.353768] init: failsafe main process (1278) killed by TERM signal
[   26.405720] init: friendly-recovery post-stop process (815) terminated with status 1
[   26.433996] Bluetooth: Core ver 2.16
[   26.434013] NET: Registered protocol family 31
[   26.434015] Bluetooth: HCI device and connection manager initialized
[   26.434017] Bluetooth: HCI socket layer initialized
[   26.434019] Bluetooth: L2CAP socket layer initialized
[   26.434025] Bluetooth: SCO socket layer initialized
[   26.442253] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.442256] Bluetooth: BNEP filters: protocol multicast
[   26.445434] ppdev: user-space parallel port driver
[   26.452155] Bluetooth: RFCOMM TTY layer initialized
[   26.452161] Bluetooth: RFCOMM socket layer initialized
[   26.452162] Bluetooth: RFCOMM ver 1.11
[   26.469463] type=1400 audit(1350577796.426:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1385 comm="apparmor_parser"
[   26.469894] type=1400 audit(1350577796.426:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1384 comm="apparmor_parser"
[   26.469903] type=1400 audit(1350577796.426:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1385 comm="apparmor_parser"
[   26.470152] type=1400 audit(1350577796.426:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1385 comm="apparmor_parser"
[   26.472064] type=1400 audit(1350577796.430:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1374 comm="apparmor_parser"
[   26.472577] type=1400 audit(1350577796.430:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1374 comm="apparmor_parser"
[   26.472676] type=1400 audit(1350577796.430:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1388 comm="apparmor_parser"
[   26.473178] type=1400 audit(1350577796.430:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1388 comm="apparmor_parser"
[   26.473524] type=1400 audit(1350577796.430:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1389 comm="apparmor_parser"
[   26.473988] type=1400 audit(1350577796.430:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1389 comm="apparmor_parser"
[   26.589730] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[   26.631555] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.631841] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.824783] r8169 0000:03:00.0: eth0: link down
[   26.824941] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.825647] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.465180] device eth0 entered promiscuous mode
[   27.685895] init: anacron main process (1504) killed by TERM signal
[   27.891075] init: plymouth-stop pre-start process (1908) terminated with status 1
[   29.850288] wlan0: authenticate with 00:24:d4:66:ee:2c (try 1)
[   29.854204] wlan0: authenticated
[   29.870700] wlan0: associate with 00:24:d4:66:ee:2c (try 1)
[   29.875804] wlan0: RX AssocResp from 00:24:d4:66:ee:2c (capab=0x411 status=0 aid=2)
[   29.875814] wlan0: associated
[   29.886800] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.442872] ieee80211 phy0: wlan0: No probe response from AP 00:24:d4:66:ee:2c after 500ms, disconnecting.
[   38.602791] cfg80211: All devices are disconnected, going to restore regulatory settings
[   38.602803] cfg80211: Restoring regulatory settings
[   38.602807] cfg80211: Calling CRDA to update world regulatory domain
[   38.607680] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   38.607684] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607685] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   38.607687] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607689] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   38.607691] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607692] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   38.607694] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607695] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   38.607697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607698] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   38.607700] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607702] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   38.607703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607705] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   38.607707] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607708] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   38.607710] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607711] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   38.607713] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607714] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   38.607716] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607717] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   38.607719] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.607721] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   38.607722] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.607724] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   38.607725] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.607727] cfg80211: World regulatory domain updated:
[   38.607729] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.607730] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607732] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.607733] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.607735] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.607736] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.774629] wlan0: authenticate with 00:24:d4:66:ee:2c (try 1)
[   39.972945] wlan0: authenticate with 00:24:d4:66:ee:2c (try 2)
[   40.172726] wlan0: authenticate with 00:24:d4:66:ee:2c (try 3)
[   40.372430] wlan0: authentication with 00:24:d4:66:ee:2c timed out
[   40.684017] wlan0: no IPv6 routers present
[   54.404909] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  289.418205] r8169 0000:03:00.0: eth0: link up
[  289.418527] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  300.204176] eth0: no IPv6 routers present

La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#5 Le 18/10/2012, à 21:00

InAme19

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Alors par expérience je te déconseille d'utiliser les pilotes proposés. J'avais les mêmes genre de problème avec ma carte ATI.
Installe les pilotes Catalyst, ils sont top. Pour ce faire il suffit d'aller sur le site d'AMD et de les télécharger : http://support.amd.com/fr/gpudownload/l … linux.aspx

Tu auras un fichier .sh, tu fais un chmod +x dessus et tu le lances. Tu n'as qu'à suivre les instructions et hop c'est nickel.

Pour moi ils marchaient très bien, mais à chaque mise à niveau d'Ubuntu je devais les réinstaller manuellement... Donc je te conseille de garder le fichier dans un coin. Au lancement d'Ubuntu j'avais un écran noir, donc je bootais sur le mode sans echecs et réinstallais les pilotes, et hop ça remarchait bien... Donc garde bien ça en tête aussi. Ma première mise à niveau a été horrible, j'avais mis longtemps avant de comprendre qu'en réinstallant les pilotes ça remarchait (d'où un bon nombre de posts de ma part sur ce site ^^)

Les cartes ATI c'est vraiment pas ça... Depuis je me suis monté mon propre PC et j'ai acheté une carte graphique super compatible Linux (en regardant des tests sur le site phoronix.com, énorme pour connaître les composants Linux qui marchent bien). Depuis je n'ai pas eu un seul problème, j'ai pris les pilotes proposés et peux tout faire avec mon pc, là je viens de faire la mise à niveau 12.10 et je n'ai eu aucun souci, c'est le paradis wink

Dernière modification par InAme19 (Le 18/10/2012, à 21:03)

Hors ligne

#6 Le 18/10/2012, à 22:40

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

J'avais aussi fait l'essai sans grand succès Je recommence quand même demain pour vérifier définitivement.


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#7 Le 19/10/2012, à 11:24

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Pas de succès avec Catalyst. Je détaille sur un autre post, http://forum.ubuntu-fr.org/viewtopic.ph … #p10862441


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#8 Le 20/10/2012, à 09:52

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Suis-je donc interdit d'installation de Quantal sur un portable HP acheté il y a six mois ?


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#9 Le 20/10/2012, à 22:23

lolonene

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Malheureusement tu n'est pas le seul, je ne peut plus installer ubuntu sur mon HP depuis la version 12.04. mêmes symptômes que toi.
désolant
déjà que j'avais du mal avec unity, mais là ça commence à faire beaucoup.
J'ai l'impression que plus ubuntu "évolue" moins ça fonctionne.
Va surement falloir changer de navire sad

Dernière modification par lolonene (Le 20/10/2012, à 22:25)


Ordi Bureau HP processeur Intel Core i5-2300 CPU @ 2.80GHz × 4 6Go RAM 64 Bits carte graphique GeForce GT 420/PCI/SSE2 with cuba dual boot Win 7 / ubuntu 12.04 (upgrade car impossibilité de faire une nouvelle installation)
eeepc 1005HA-M dual boot XP home Ubuntu 12.04 (installation "neuve")

Hors ligne

#10 Le 23/10/2012, à 18:42

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

@lolonene,
tu as la même puce graphique ? J'ai quand même pu installer 12.04 qui fonctionne en mode dépannage. Tu as un écran noir quand tu veux installer ? A quel moment précis ?

Dernière modification par sinbad83 (Le 23/10/2012, à 18:43)


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#11 Le 23/10/2012, à 20:59

lolonene

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

non je n'ai pas la même puce graphique, perso, j'ai du faire une install de 11.10 puis deux mise à niveau pour arriver à la 12.10.

Ci dessous la video que j'avais fait pour l'installation de la 12.04, meême chose et même endroit de plantage pour la 12.10

Lien vers video plantage


Ordi Bureau HP processeur Intel Core i5-2300 CPU @ 2.80GHz × 4 6Go RAM 64 Bits carte graphique GeForce GT 420/PCI/SSE2 with cuba dual boot Win 7 / ubuntu 12.04 (upgrade car impossibilité de faire une nouvelle installation)
eeepc 1005HA-M dual boot XP home Ubuntu 12.04 (installation "neuve")

Hors ligne

#12 Le 23/10/2012, à 21:18

Sissio

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Pour ma part j'ai le Hp Pavilion g7-1231sf et installation de la 12.04 avec l'option nomodeset sans aucun souci puis ajout de

sudo add-apt-repository ppa:xorg-edgers/ppa

car puce intel puis un coup de sudo apt-get update puis sudo apt-get upgrade et tout roule nickel.

Concernant la 12.10 que ce soit nouvelle install ou mise à jour, écran noir et rien à en tirer, donc pour l'instant je fouille les forums dans l'idée de trouver une parade mais rien de bien concret.

Hors ligne

#13 Le 29/10/2012, à 21:14

Sissio

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

Un peu de concret la dessus, j'ai pu installer une xubuntu 12.10 en faisant la mise à jour de ma 12.04 et tout est passé nickel, pourquoi une ubuntu n'est pas passé alors qu'une xubuntu oui, je l'ignore par contre.

Hors ligne

#14 Le 03/11/2012, à 11:25

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

soryne a écrit :

Le 23/10/2012, à 21:18
Pour ma part j'ai le Hp Pavilion g7-1231sf et installation de la 12.04 avec l'option nomodeset sans aucun souci puis ajout de
sudo add-apt-repository ppa:xorg-edgers/ppa
car puce intel puis un coup de sudo apt-get update puis sudo apt-get upgrade et tout roule nickel.

L'ajout du ppa n'a rien changé pour 12.04, je suis toujours obligé de démarrer en mode Dépannage, sinon écran noir...
Côté 12.10, j'ai fait une mise à niveau à partir de 12.04 (mode Dépannage), toujours impossible à démarrer, même en Dépannage...

Dernière modification par sinbad83 (Le 03/11/2012, à 11:27)


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

#15 Le 03/11/2012, à 11:48

sinbad83

Re : Installation impossible Quantal 12.10 sur portable HP Pavillon G6

@faucon50,
merci pour ta proposition. Quel serait le créneau jour et heures qui te conviendrait ?


La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop Quad8800 Ubuntu 14.04.1 et Seven,  Samsung N150 U14.04.1 et Seven, HP Pavillon G6 U14.04.1 et Seven, Serveurs Ubuntu 14.04.1, Serveur virtualisation Proxmox

Hors ligne

Haut de page ↑