Kubuntu 14.04 LTS à coté de Windows7, problème de partitionnement

manos · Le 11/12/2014, à 04:06

Bonsoir à tous.

Après avoir essayé pas mal de tutos sur l'installation de Kubuntu Trusty Tahr LTS à coté de Windows 7 je désespère un peu. J'ai essayé Webo mais çà ne marche pas, j'ai un message d'erreur qui m'indique que le système ne peut pas être lancé. J'ai réussi à installer Kubuntu après partitionnement mais le système démarre sous Windows 7 sans passer par le menu Grub. J'ai aussi essayé Rescue disk boot pour essayer de rétablir le double boot sans succès. Il m'a permis de rétablir le MBR de Windows.
Je me soumets donc à votre aide pour repartitionner mon ordi car je pense que tous les problèmes viennent d'une erreur que j'ai dû faire lors de cette étape.

J'ai gardé 18go pour Kubuntu sans mémoire swap car j'ai 12go de mémoire, c'est peut-être une erreur.
Le DD de 30,23 go est la clé usb live que j'ai utilisé pour faire la capture.

Merci pour votre assistance.

Rufus T. Firefly · Le 11/12/2014, à 04:40

Salut,

D'après ce que je vois, tu n'as que des partitions ntfs. Si ton linux est censé être déjà installé quelque part, ce n'est pas bon.
Si tu as utilisé wubi, ton linux est plus ou moins installé en tant que programme windows... En plus ça ne fonctionne pas vraiment avec les versions actuelles. Un conseil, va sous w$ et désinstalle ça, comme tu ferais avec n'importe quel programme windows...

Je vois aussi un espace non alloué de taille suffisante pour mettre linux (dans la partition étendue sda4). Relance le live et gparted, sélectionne l'espace libre, crée une partition logique formatée en ext4. Valide, puis commence l'installation.
Lors de l'étape de partitionnement, choisis "Autre" (manuel). Tu sélectionnes la partition ext4, modifier. Tu gardes les valeurs par défaut (taille, format ext4...) et tu indiques juste le point de montage, en l'occurrence la racine du système ( / ).
Je crois qu'il y a aussi, sur le même écran (?), un truc sur grub. Vérifie qu'il te le met bien sur sda et pas sur sda5.

Tu confirmes tout ça, puis tu termines l'installation...

Edit : je viens de voir que tu ne sembles pas avoir le net. Un conseil : si possible branche ta bécane par câble, au moins le temps d'installer. Parce que les paquets linguistiques ne sont pas sur l'iso (pour cause : il y a une foule de langues possibles). Donc sans le net, tu l'auras en globish pour commencer, éventuellement même avec un clavier qwerty (=> pour avoir manos, il faut taper ,qnos)...

Dernière modification par Rufus T. Firefly (Le 11/12/2014, à 06:00)

manos · Le 11/12/2014, à 23:42

J'ai réalisé les manips en question, toujours pas de double boot au démarrage. Du coup j'ai réparé le MBR de Windows et réalisé ce rapport avec Boot rescue disk.

Voici l'état de la partition avant le rétablissement du MBR Windows avec Boot rescue disk.

Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]

============================= Boot Info Summary: ===============================

=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD

sda2: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda3: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /ubuntu/winboot/wubildr /ubuntu/winboot/wubildr.mbr

sda4: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 1316642 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 * 206,848 245,966,847 245,760,000 7 NTFS / exFAT / HPFS
/dev/sda3 245,966,848 451,530,751 205,563,904 7 NTFS / exFAT / HPFS
/dev/sda4 451,530,752 488,394,751 36,864,000 f W95 Extended (LBA)
/dev/sda5 451,539,018 488,392,064 36,853,047 83 Linux

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 32.5 GB, 32463912960 bytes
255 heads, 63 sectors/track, 3946 cylinders, total 63406080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 * 96 63,406,079 63,405,984 c W95 FAT32 (LBA)

"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 48D2AA84D2AA763A ntfs Réservé au système
/dev/sda2 0052DB6B52DB63C6 ntfs
/dev/sda3 B410E7FC10E7C408 ntfs
/dev/sda5 3f25cb2a-8ad0-4925-b9f1-fe82216e2908 ext4
/dev/sdb1 55D1-0BAA vfat
/dev/zram0 ba9994f7-7148-4dad-917d-638c0403d6f4 swap
/dev/zram1 34c7a9af-990f-4098-9d93-0cdf0debe4c0 swap
/dev/zram2 4661ec0b-0646-44cf-acb2-4d2c16f80c7e swap
/dev/zram3 e41428dd-7921-4a63-97b9-9deba6c64604 swap

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root 9 Dec 11 22:21 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 11 22:21 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 11 22:21 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 11 22:21 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 11 22:19 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 11 22:17 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBFA91212H-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Dec 11 22:19 usb-JetFlash_Transcend_32GB_05WSR3FV9EYHFAXR-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 11 22:19 usb-JetFlash_Transcend_32GB_05WSR3FV9EYHFAXR-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Dec 11 22:21 wwn-0x50025388a0791db5 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 11 22:21 wwn-0x50025388a0791db5-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 11 22:21 wwn-0x50025388a0791db5-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 11 22:21 wwn-0x50025388a0791db5-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 11 22:19 wwn-0x50025388a0791db5-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 11 22:17 wwn-0x50025388a0791db5-part5 -> ../../sda5

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}

if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
else
search --no-floppy --fs-uuid --set=root 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
fi
font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3f25cb2a-8ad0-4925-b9f1-fe82216e2908' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
else
   search --no-floppy --fs-uuid --set=root 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
fi
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=3f25cb2a-8ad0-4925-b9f1-fe82216e2908 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-3f25cb2a-8ad0-4925-b9f1-fe82216e2908' {
menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-3f25cb2a-8ad0-4925-b9f1-fe82216e2908' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
else
   search --no-floppy --fs-uuid --set=root 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=3f25cb2a-8ad0-4925-b9f1-fe82216e2908 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-3f25cb2a-8ad0-4925-b9f1-fe82216e2908' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
   search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
else
   search --no-floppy --fs-uuid --set=root 3f25cb2a-8ad0-4925-b9f1-fe82216e2908
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=3f25cb2a-8ad0-4925-b9f1-fe82216e2908 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=3f25cb2a-8ad0-4925-b9f1-fe82216e2908 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/2054/mounts) leaked on lvs invocation. Parent PID 11026: bash
File descriptor 63 (pipe:[26352]) leaked on lvs invocation. Parent PID 11026: bash
No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-12-11__22h17 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2054/mounts) leaked on lvs invocation. Parent PID 4639: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

=================== os-prober:
/dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="48D2AA84D2AA763A" TYPE="ntfs"
/dev/sda2: UUID="0052DB6B52DB63C6" TYPE="ntfs"
/dev/sda3: UUID="B410E7FC10E7C408" TYPE="ntfs"
/dev/sda5: UUID="3f25cb2a-8ad0-4925-b9f1-fe82216e2908" TYPE="ext4"
/dev/sdb1: UUID="55D1-0BAA" TYPE="vfat"
/dev/zram0: UUID="ba9994f7-7148-4dad-917d-638c0403d6f4" TYPE="swap"
/dev/zram1: UUID="34c7a9af-990f-4098-9d93-0cdf0debe4c0" TYPE="swap"
/dev/zram2: UUID="4661ec0b-0646-44cf-acb2-4d2c16f80c7e" TYPE="swap"
/dev/zram3: UUID="e41428dd-7921-4a63-97b9-9deba6c64604" TYPE="swap"

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda2.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 22 23:11 grub.d
total 76
-rwxr-xr-x 1 root root 9424 May 15 2014 00_header
-rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 15 2014 40_custom
-rwxr-xr-x 1 root root 216 May 15 2014 41_custom
-rw-r--r-- 1 root root 483 May 15 2014 README

=================== sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0001
Boot0001* Hard Drive BIOS(2,0,00)..GO..NO........o.S.a.m.s.u.n.g. .S.S.D. .8.4.0. .E.V.O. .2.5.0.G.B....................A...........................>..Gd-.;.A..MQ..L.1.S.B.D.S.N.F.B.9.A.2.1.2.1. .H. . . . ........BO..NO.........J.e.t.F.l.a.s.h.T.r.a.n.s.c.e.n.d. .3.2.G.B. .1.1.0.0....................A.............................L..Gd-.;.A..MQ..L.J.e.t.F.l.a.s.h.T.r.a.n.s.c.e.n.d. .3.2.G.B. .1.1.0.0........BO
Boot0002* UEFI: JetFlashTranscend 32GB 1100 ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(3,0)HD(1,60,3c77fa0,000e4387)..BO
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)

=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
sda5 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.

sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes

=================== parted -l:

Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs
2 106MB 126GB 126GB primary ntfs boot
3 126GB 231GB 105GB primary ntfs
4 231GB 250GB 18.9GB extended lba
5 231GB 250GB 18.9GB logical ext4

Model: JetFlash Transcend 32GB (scsi)
Disk /dev/sdb: 32.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number Start End Size Type File system Flags
1 49.2kB 32.5GB 32.5GB primary fat32 boot, lba

Error: /dev/zram0: unrecognised disk label

Error: /dev/zram1: unrecognised disk label

Error: /dev/zram2: unrecognised disk label

Error: /dev/zram3: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA Samsung SSD 840;
1:1049kB:106MB:105MB:ntfs::;
2:106MB:126GB:126GB:ntfs::boot;
3:126GB:231GB:105GB:ntfs::;
4:231GB:250GB:18.9GB:::lba;
5:231GB:250GB:18.9GB:ext4::;

BYT;
/dev/sdb:32.5GB:scsi:512:512:msdos:JetFlash Transcend 32GB;
1:49.2kB:32.5GB:32.5GB:fat32::boot, lba;

Error: /dev/zram0: unrecognised disk label

Error: /dev/zram1: unrecognised disk label

Error: /dev/zram2: unrecognised disk label

Error: /dev/zram3: unrecognised disk label

=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)

=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control

=================== df -Th:

Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 5.6G 6.2M 5.6G 1% /
udev devtmpfs 5.6G 12K 5.6G 1% /dev
tmpfs tmpfs 1.2G 1.2M 1.2G 1% /run
/dev/sdb1 vfat 31G 1.7G 29G 6% /cdrom
/dev/loop0 squashfs 549M 549M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 5.6G 8.0K 5.6G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 5.6G 0 5.6G 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 fuseblk 100M 25M 76M 25% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 118G 75G 43G 64% /mnt/boot-sav/sda2
/dev/sda3 fuseblk 99G 9.3G 89G 10% /mnt/boot-sav/sda3
/dev/sda5 ext4 18G 3.3G 14G 21% /mnt/boot-sav/sda5

=================== fdisk -l:

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8e23d41c

Device Boot Start End Blocks Id System
/dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 * 206848 245966847 122880000 7 HPFS/NTFS/exFAT
/dev/sda3 245966848 451530751 102781952 7 HPFS/NTFS/exFAT
/dev/sda4 451530752 488394751 18432000 f W95 Ext'd (LBA)
/dev/sda5 451539018 488392064 18426523+ 83 Linux

Disk /dev/sdb: 32.5 GB, 32463912960 bytes
255 heads, 63 sectors/track, 3946 cylinders, total 63406080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e4387

Device Boot Start End Blocks Id System
/dev/sdb1 * 96 63406079 31702992 c W95 FAT32 (LBA)

=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s

=================== Advice in case of suggested repair
Warning: continuing without internet would leave your system unbootable. Please connect internet.
Do you want to continue?

=================== User settings
The settings chosen by the user will restore the [(generic mbr)] MBR in sda, and make it boot on sda2.
Additional repair will be performed: unhide-bootmenu-10s

Unhide GRUB boot menu in sda5/etc/default/grub
Will restore the MBR_TO_RESTORE : sda (generic mbr) into sda
dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
0+1 records in
0+1 records out
Unhide GRUB boot menu in sda5/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.

manos · Le 11/12/2014, à 23:49

A noter que le pc en question ne dispose pas d'entrée filaire pour se connecter à internet, ou je n'ai pas le câble, la carte wi-fi n'est pas reconnue, c'est un Asus de dernière génération TP300LA, donc c'est une complication complémentaire. Je me connecte via un une autre machine.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 11/12/2014, à 04:06

Kubuntu 14.04 LTS à coté de Windows7, problème de partitionnement

#2 Le 11/12/2014, à 04:40

Re : Kubuntu 14.04 LTS à coté de Windows7, problème de partitionnement

#3 Le 11/12/2014, à 23:42

Re : Kubuntu 14.04 LTS à coté de Windows7, problème de partitionnement

#4 Le 11/12/2014, à 23:49

Re : Kubuntu 14.04 LTS à coté de Windows7, problème de partitionnement

Pied de page des forums