Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 16/09/2017, à 15:05

Schmouel

Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Juste avant l'invit du mot de passe pour ouvrir la session, 3 petites lignes blanches qui passent très vite et qui, me semble t il, contiennent un message d'erreur.
Y a t il un moyen de faire un démarrage pas à pas qui permettrait de lire ces lignes ou peut on les retrouver ailleurs ?

Dernière modification par Schmouel (Le 17/09/2017, à 16:47)

Hors ligne

#2 Le 16/09/2017, à 15:07

koshieIsYourDaddy

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Salut,

Tu peux consulter le fichier /var/log/dmesg qui correspond aux évènement qui ont lieu au démarrage.

koshicalement

Hors ligne

#3 Le 16/09/2017, à 15:49

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

merci smile

mais le fichier est vide !

Hors ligne

#4 Le 16/09/2017, à 20:28

koshieIsYourDaddy

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Wut ?

Et lorsque tu tapes la commande dmesg en root dans ton terminal ?

Hors ligne

#5 Le 17/09/2017, à 06:16

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Pas besoin d'être en root pour

dmesg

!


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#6 Le 17/09/2017, à 06:19

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Schmouel a écrit :

mais le fichier est vide !

Copie-colle cette commande-ci :

sudo cat /var/log/dmesg

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#7 Le 17/09/2017, à 08:45

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

moko138 a écrit :
Schmouel a écrit :

mais le fichier est vide !

Copie-colle cette commande-ci :

sudo cat /var/log/dmesg

rien dedans

par contre dmesg donne (accrochez vous)

[    0.000000] BIOS-e820: [mem 0x0000000076d3c000-0x0000000076d3cfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076d3d000-0x0000000078027fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078028000-0x0000000079127fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079128000-0x000000007ed3dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ed3e000-0x000000007ef3dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007ef3e000-0x000000007f72dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f72e000-0x000000007ff7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff7e000-0x000000007fffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffff000-0x000000008cffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000271ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7fffd014  SMBIOS=0x7efb3000  SMBIOS 3.0=0x7efb1000  ESRT=0x7efaf018  PROP=0x76d37858 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 80VF/Agera, BIOS 2JCN39WW 05/31/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x272000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 008A000000 mask 7FFE000000 uncachable
[    0.000000]   5 base 0089000000 mask 7FFF000000 uncachable
[    0.000000]   6 base 0088800000 mask 7FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ffff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007efaf018 to 0x000000007efaf078.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff958600098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x21628000, 0x21628fff] PGTABLE
[    0.000000] BRK [0x21629000, 0x21629fff] PGTABLE
[    0.000000] BRK [0x2162a000, 0x2162afff] PGTABLE
[    0.000000] BRK [0x2162b000, 0x2162bfff] PGTABLE
[    0.000000] BRK [0x2162c000, 0x2162cfff] PGTABLE
[    0.000000] BRK [0x2162d000, 0x2162dfff] PGTABLE
[    0.000000] BRK [0x2162e000, 0x2162efff] PGTABLE
[    0.000000] BRK [0x2162f000, 0x2162ffff] PGTABLE
[    0.000000] BRK [0x21630000, 0x21630fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32fa6000-0x357cafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007FFFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007FFB7188 000124 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007FFEA000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007FFBC000 02AA88 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007FF5A000 000040
[    0.000000] ACPI: UEFI 0x000000007FFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007FFFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000007FFFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFF9000 0004C3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000007FFF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFF3000 003113 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFEF000 0038D7 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000007FFEE000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000007FFED000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000007FFEC000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007FFEB000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000007FFE9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007FFE8000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007FFE7000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFBB000 0006CF (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFBA000 0001BC (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000007FFB9000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000007FFB8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFB6000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFB5000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFB1000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFB0000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007FFAF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000007FFAE000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFAD000 000F61 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007FFAC000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000007FFAB000 000114 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: NHLT 0x000000007FFAA000 00002D (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007FFA9000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000007FFA8000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000271ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x271fd3000-0x271ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000271ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000076d3afff]
[    0.000000]   node   0: [mem 0x0000000076d3d000-0x0000000078027fff]
[    0.000000]   node   0: [mem 0x0000000079128000-0x000000007ed3dfff]
[    0.000000]   node   0: [mem 0x000000007fffe000-0x000000007fffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000271ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000271ffffff]
[    0.000000] On node 0 totalpages: 2030553
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7985 pages used for memmap
[    0.000000]   DMA32 zone: 511037 pages, LIFO batch:31
[    0.000000]   Normal zone: 23680 pages used for memmap
[    0.000000]   Normal zone: 1515520 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000089000000-0x000000008cffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76d3b000-0x76d3bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x76d3c000-0x76d3cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78028000-0x79127fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ed3e000-0x7ef3dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ef3e000-0x7f72dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f72e000-0x7ff7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff7e000-0x7fffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ffff000-0x8cffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x8d000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff958871c00000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1998802
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic.efi.signed root=UUID=a068af4a-f328-43ab-9cfb-b0bcb3451db9 ro quiet i915.enable_rc6=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7813936K/8122212K available (9068K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 308276K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.000020] pid_max: default: 32768 minimum: 301
[    0.000027] ACPI: Core revision 20160930
[    0.026809] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.028044] Security Framework initialized
[    0.028045] Yama: becoming mindful.
[    0.028059] AppArmor: AppArmor initialized
[    0.028372] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029489] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029982] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029987] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.030193] CPU: Physical Processor ID: 0
[    0.030194] CPU: Processor Core ID: 0
[    0.030198] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.030198] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.030203] mce: CPU supports 8 MCE banks
[    0.030211] CPU0: Thermal monitoring enabled (TM1)
[    0.030223] process: using mwait in idle threads
[    0.030225] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.030226] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.030306] Freeing SMP alternatives memory: 32K
[    0.033323] ftrace: allocating 34225 entries in 134 pages
[    0.045742] smpboot: Max logical packages: 2
[    0.045751] DMAR: Host address width 39
[    0.045751] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.045758] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.045759] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.045762] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.045762] DMAR: RMRR base: 0x0000007f622000 end: 0x0000007f641fff
[    0.045763] DMAR: RMRR base: 0x00000088800000 end: 0x0000008cffffff
[    0.045764] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.045764] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.045765] DMAR: ANDD device: 4 name: \_SB.PCI0.I2C3
[    0.045766] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.045767] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.045767] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.047186] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.047186] x2apic enabled
[    0.047200] Switched APIC routing to cluster x2apic.
[    0.051267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090962] TSC deadline timer enabled
[    0.090967] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.091012] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.091035] ... version:                4
[    0.091036] ... bit width:              48
[    0.091036] ... generic registers:      4
[    0.091036] ... value mask:             0000ffffffffffff
[    0.091037] ... max period:             00007fffffffffff
[    0.091037] ... fixed-purpose events:   3
[    0.091037] ... event mask:             000000070000000f
[    0.091676] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091685] smp: Bringing up secondary CPUs ...
[    0.091734] x86: Booting SMP configuration:
[    0.091734] .... node  #0, CPUs:      #1 #2 #3
[    0.092882] smp: Brought up 1 node, 4 CPUs
[    0.092884] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.096182] devtmpfs: initialized
[    0.096221] x86/mm: Memory block size: 128MB
[    0.098101] evm: security.selinux
[    0.098101] evm: security.SMACK64
[    0.098101] evm: security.SMACK64EXEC
[    0.098102] evm: security.SMACK64TRANSMUTE
[    0.098102] evm: security.SMACK64MMAP
[    0.098102] evm: security.ima
[    0.098102] evm: security.capability
[    0.098141] PM: Registering ACPI NVS region [mem 0x76d3b000-0x76d3bfff] (4096 bytes)
[    0.098141] PM: Registering ACPI NVS region [mem 0x78028000-0x79127fff] (17825792 bytes)
[    0.098301] PM: Registering ACPI NVS region [mem 0x7f72e000-0x7ff7dfff] (8716288 bytes)
[    0.098426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.098432] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.098464] pinctrl core: initialized pinctrl subsystem
[    0.098615] RTC time:  7:37:38, date: 09/17/17
[    0.098679] NET: Registered protocol family 16
[    0.107952] cpuidle: using governor ladder
[    0.123971] cpuidle: using governor menu
[    0.123977] PCCT header not found.
[    0.124038] Simple Boot Flag at 0x44 set to 0x1
[    0.124055] ACPI: bus type PCI registered
[    0.124055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.124119] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.124145] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.124154] PCI: Using configuration type 1 for base access
[    0.136675] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.136675] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.136859] ACPI: Added _OSI(Module Device)
[    0.136860] ACPI: Added _OSI(Processor Device)
[    0.136860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.136861] ACPI: Added _OSI(Processor Aggregator Device)
[    0.138293] ACPI: Executed 34 blocks of module-level executable AML code
[    0.146968] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.150989] ACPI: Dynamic OEM Table Load:
[    0.151040] ACPI: SSDT 0xFFFF9588683AF000 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.151175] ACPI: Executed 1 blocks of module-level executable AML code
[    0.151243] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.152437] ACPI: Dynamic OEM Table Load:
[    0.152446] ACPI: SSDT 0xFFFF958867DA2800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.152567] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152709] ACPI: Dynamic OEM Table Load:
[    0.152716] ACPI: SSDT 0xFFFF958867DEB200 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.152816] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152879] ACPI: Dynamic OEM Table Load:
[    0.152885] ACPI: SSDT 0xFFFF958867DEA800 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.152985] ACPI: Executed 1 blocks of module-level executable AML code
[    0.153298] ACPI: Dynamic OEM Table Load:
[    0.153307] ACPI: SSDT 0xFFFF9588683A8000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.153607] ACPI: Executed 1 blocks of module-level executable AML code
[    0.153734] ACPI: Dynamic OEM Table Load:
[    0.153741] ACPI: SSDT 0xFFFF958867DEB000 000197 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.153858] ACPI: Executed 1 blocks of module-level executable AML code
[    0.153993] ACPI: Dynamic OEM Table Load:
[    0.153999] ACPI: SSDT 0xFFFF958867DEAE00 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.154115] ACPI: Executed 1 blocks of module-level executable AML code
[    0.155638] ACPI : EC: EC started
[    0.155639] ACPI : EC: interrupt blocked
[    0.165025] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.165026] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.165027] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.165027] ACPI: Interpreter enabled
[    0.165065] ACPI: (supports S0 S3 S4 S5)
[    0.165066] ACPI: Using IOAPIC for interrupt routing
[    0.165098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.169840] ACPI: Power Resource [WRST] (on)
[    0.170144] ACPI: Power Resource [WRST] (on)
[    0.170449] ACPI: Power Resource [WRST] (on)
[    0.170751] ACPI: Power Resource [WRST] (on)
[    0.171199] ACPI: Power Resource [WRST] (on)
[    0.171505] ACPI: Power Resource [WRST] (on)
[    0.171807] ACPI: Power Resource [WRST] (on)
[    0.172110] ACPI: Power Resource [WRST] (on)
[    0.172544] ACPI: Power Resource [WRST] (on)
[    0.172837] ACPI: Power Resource [WRST] (on)
[    0.173145] ACPI: Power Resource [WRST] (on)
[    0.173447] ACPI: Power Resource [WRST] (on)
[    0.173730] ACPI: Power Resource [WRST] (on)
[    0.174010] ACPI: Power Resource [WRST] (on)
[    0.174291] ACPI: Power Resource [WRST] (on)
[    0.174575] ACPI: Power Resource [WRST] (on)
[    0.174863] ACPI: Power Resource [WRST] (on)
[    0.175144] ACPI: Power Resource [WRST] (on)
[    0.175426] ACPI: Power Resource [WRST] (on)
[    0.175707] ACPI: Power Resource [WRST] (on)
[    0.178890] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.181986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.181989] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.184095] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.185679] PCI host bridge to bus 0000:00
[    0.185680] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.185681] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.185682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.185683] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.185683] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.185684] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.185684] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.185685] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.185686] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.185686] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.185687] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.185687] pci_bus 0000:00: root bus resource [mem 0x8d000000-0xdfffffff window]
[    0.185688] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.185689] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.185697] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.186415] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.186423] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.186428] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.186431] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.187019] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.187029] pci 0000:00:04.0: reg 0x10: [mem 0xa1320000-0xa1327fff 64bit]
[    0.187649] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.187660] pci 0000:00:08.0: reg 0x10: [mem 0xa1330000-0xa1330fff 64bit]
[    0.188275] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.188292] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
[    0.188355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.188961] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.188997] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.189013] pci 0000:00:14.2: reg 0x10: [mem 0xa1331000-0xa1331fff 64bit]
[    0.189637] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.189658] pci 0000:00:15.0: reg 0x10: [mem 0xa1332000-0xa1332fff 64bit]
[    0.190307] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.190328] pci 0000:00:15.1: reg 0x10: [mem 0xa1333000-0xa1333fff 64bit]
[    0.190980] pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000
[    0.191001] pci 0000:00:15.3: reg 0x10: [mem 0xa1334000-0xa1334fff 64bit]
[    0.191662] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.191681] pci 0000:00:16.0: reg 0x10: [mem 0xa1335000-0xa1335fff 64bit]
[    0.191754] pci 0000:00:16.0: PME# supported from D3hot
[    0.192363] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[    0.192427] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.193000] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.193053] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.193116] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.193688] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.193747] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.194418] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.194428] pci 0000:00:1f.2: reg 0x10: [mem 0xa132c000-0xa132ffff]
[    0.195052] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.195074] pci 0000:00:1f.3: reg 0x10: [mem 0xa1328000-0xa132bfff 64bit]
[    0.195105] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit]
[    0.195154] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.195734] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.195769] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.195816] pci 0000:00:1f.4: reg 0x10: [mem 0xa1336000-0xa13360ff 64bit]
[    0.195887] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.196742] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[    0.196784] pci 0000:01:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit]
[    0.197006] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.197120] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.209168] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.209171] pci 0000:00:1c.0:   bridge window [mem 0xa1000000-0xa11fffff]
[    0.209303] pci 0000:02:00.0: [144d:a802] type 00 class 0x010802
[    0.209321] pci 0000:02:00.0: reg 0x10: [mem 0xa1200000-0xa1203fff 64bit]
[    0.209330] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x30ff]
[    0.209498] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.221101] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.221104] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.221106] pci 0000:00:1d.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.223275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223329] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.223381] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223432] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223483] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223533] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223637] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.224205] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.224326] ACPI Warning: GPE type mismatch (level/edge) (20160930/evxface-826)
[    0.224329] ACPI : EC: interrupt unblocked
[    0.224344] ACPI : EC: event unblocked
[    0.224381] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.224382] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.224637] SCSI subsystem initialized
[    0.224672] libata version 3.00 loaded.
[    0.224699] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.224700] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.224703] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.224703] vgaarb: loaded
[    0.224717] ACPI: bus type USB registered
[    0.224729] usbcore: registered new interface driver usbfs
[    0.224736] usbcore: registered new interface driver hub
[    0.224747] usbcore: registered new device driver usb
[    0.224809] Registered efivars operations
[    0.254258] PCI: Using ACPI for IRQ routing
[    0.282972] PCI: pci_cache_line_size set to 64 bytes
[    0.283385] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.283386] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.283387] e820: reserve RAM buffer [mem 0x76d3b000-0x77ffffff]
[    0.283387] e820: reserve RAM buffer [mem 0x78028000-0x7bffffff]
[    0.283388] e820: reserve RAM buffer [mem 0x7ed3e000-0x7fffffff]
[    0.283388] e820: reserve RAM buffer [mem 0x7ffff000-0x7fffffff]
[    0.283389] e820: reserve RAM buffer [mem 0x272000000-0x273ffffff]
[    0.283460] NetLabel: Initializing
[    0.283460] NetLabel:  domain hash size = 128
[    0.283460] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.283470] NetLabel:  unlabeled traffic allowed by default
[    0.283564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.283567] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.285612] clocksource: Switched to clocksource hpet
[    0.290987] VFS: Disk quotas dquot_6.6.0
[    0.291000] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.291065] AppArmor: AppArmor Filesystem Enabled
[    0.291095] pnp: PnP ACPI init
[    0.291265] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.291266] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.291267] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.291268] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.291268] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.291269] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.291270] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.291272] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291485] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.291486] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291556] system 00:02: [io  0x06a4] has been reserved
[    0.291557] system 00:02: [io  0x06a0] has been reserved
[    0.291558] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291722] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.291723] system 00:03: [io  0xffff] has been reserved
[    0.291724] system 00:03: [io  0xffff] has been reserved
[    0.291725] system 00:03: [io  0xffff] has been reserved
[    0.291725] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.291726] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.291727] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291797] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291823] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.291824] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.291841] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.292696] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.292697] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.292698] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.292699] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.292699] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.292701] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293093] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.293094] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.293094] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.293095] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.293096] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.293097] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.293098] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.293098] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.293099] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.293100] system 00:08: [mem 0x8d000000-0x8d01ffff] has been reserved
[    0.293101] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293572] pnp: PnP ACPI: found 9 devices
[    0.300508] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.300530] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.300538] pci 0000:00:1c.0:   bridge window [mem 0xa1000000-0xa11fffff]
[    0.300543] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.300545] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.300548] pci 0000:00:1d.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.300554] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.300555] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.300555] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.300556] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.300557] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.300557] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.300558] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.300559] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.300559] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.300560] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.300561] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.300561] pci_bus 0000:00: resource 15 [mem 0x8d000000-0xdfffffff window]
[    0.300562] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.300563] pci_bus 0000:01: resource 1 [mem 0xa1000000-0xa11fffff]
[    0.300564] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.300564] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff]
[    0.300675] NET: Registered protocol family 2
[    0.300780] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.300860] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.300988] TCP: Hash tables configured (established 65536 bind 65536)
[    0.301005] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.301023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.301059] NET: Registered protocol family 1
[    0.301069] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.302864] PCI: CLS 64 bytes, default 64
[    0.302893] Unpacking initramfs...
[    0.768096] Freeing initrd memory: 41108K
[    0.768159] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.0
[    0.768161] DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:15.1
[    0.768163] DMAR: ACPI device "device:78" under DMAR at fed91000 as 00:15.3
[    0.768173] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.768175] software IO TLB [mem 0x7113f000-0x7513f000] (64MB) mapped at [ffff95867113f000-ffff95867513efff]
[    0.768200] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.768324] Scanning for low memory corruption every 60 seconds
[    0.768640] audit: initializing netlink subsys (disabled)
[    0.768689] audit: type=2000 audit(1505633858.760:1): initialized
[    0.768956] Initialise system trusted keyrings
[    0.769054] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.770044] zbud: loaded
[    0.770365] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.770536] fuse init (API version 7.26)
[    0.772321] Key type asymmetric registered
[    0.772322] Asymmetric key parser 'x509' registered
[    0.772349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.772403] io scheduler noop registered
[    0.772404] io scheduler deadline registered
[    0.772409] io scheduler cfq registered (default)
[    0.772956] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[    0.772972] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.772993] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[    0.773023] efifb: probing for efifb
[    0.773034] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[    0.773034] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.773034] efifb: scrolling: redraw
[    0.773035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.776103] Console: switching to colour frame buffer device 240x67
[    0.779058] fb0: EFI VGA frame buffer device
[    0.779063] intel_idle: MWAIT substates: 0x11142120
[    0.779063] intel_idle: v0.4.1 model 0x8E
[    0.779260] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.779335] ACPI: AC Adapter [ADP1] (off-line)
[    0.779420] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:00/PNP0C0D:00/input/input0
[    0.779436] ACPI: Lid Switch [LID0]
[    0.779469] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.779471] ACPI: Power Button [PWRB]
[    0.779493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.779494] ACPI: Power Button [PWRF]
[    0.780099] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.780134] thermal LNXTHERM:00: registered as thermal_zone0
[    0.780134] ACPI: Thermal Zone [TZ00] (28 C)
[    0.780213] thermal LNXTHERM:01: registered as thermal_zone1
[    0.780213] ACPI: Thermal Zone [TZ01] (30 C)
[    0.780240] GHES: HEST is not enabled!
[    0.780322] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.784399] Linux agpgart interface v0.103
[    0.786590] loop: module loaded
[    0.786701] libphy: Fixed MDIO Bus: probed
[    0.786702] tun: Universal TUN/TAP device driver, 1.6
[    0.786702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.786744] PPP generic driver version 2.4.2
[    0.786790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.786791] ehci-pci: EHCI PCI platform driver
[    0.786797] ehci-platform: EHCI generic platform driver
[    0.786804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.786806] ohci-pci: OHCI PCI platform driver
[    0.786810] ohci-platform: OHCI generic platform driver
[    0.786814] uhci_hcd: USB Universal Host Controller Interface driver
[    0.786960] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.786964] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.788082] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.788095] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.788207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.788208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788209] usb usb1: Product: xHCI Host Controller
[    0.788209] usb usb1: Manufacturer: Linux 4.10.0-33-generic xhci-hcd
[    0.788210] usb usb1: SerialNumber: 0000:00:14.0
[    0.788341] hub 1-0:1.0: USB hub found
[    0.788356] hub 1-0:1.0: 12 ports detected
[    0.798026] ACPI: Battery Slot [BAT1] (battery present)
[    0.803701] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.803703] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.803728] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.803729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.803730] usb usb2: Product: xHCI Host Controller
[    0.803730] usb usb2: Manufacturer: Linux 4.10.0-33-generic xhci-hcd
[    0.803731] usb usb2: SerialNumber: 0000:00:14.0
[    0.803814] hub 2-0:1.0: USB hub found
[    0.803831] hub 2-0:1.0: 6 ports detected
[    0.805768] usb: port power management may be unreliable
[    0.806913] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.806914] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.808963] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.809105] mousedev: PS/2 mouse device common for all mice
[    0.809274] rtc_cmos 00:04: RTC can wake from S4
[    0.809734] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.809822] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.809827] i2c /dev entries driver
[    0.809863] device-mapper: uevent: version 1.0.3
[    0.809925] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.809927] intel_pstate: Intel P-state driver initializing
[    0.810319] intel_pstate: HWP enabled
[    0.810416] ledtrig-cpu: registered to indicate activity on CPUs
[    0.810417] EFI Variables Facility v0.08 2004-May-17
[    0.815183] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.841265] NET: Registered protocol family 10
[    0.844438] Segment Routing with IPv6
[    0.844451] NET: Registered protocol family 17
[    0.844457] Key type dns_resolver registered
[    0.844763] microcode: sig=0x806e9, pf=0x80, revision=0x5e
[    0.844863] microcode: Microcode Update Driver: v2.2.
[    0.844996] registered taskstats version 1
[    0.845006] Loading compiled-in X.509 certificates
[    0.846836] Loaded X.509 cert 'Build time autogenerated kernel key: 426a83f15e6e282b8201c8d41cda6c2876428014'
[    0.846849] zswap: loaded using pool lzo/zbud
[    0.855666] Key type big_key registered
[    0.855669] Key type trusted registered
[    0.856940] Key type encrypted registered
[    0.856942] AppArmor: AppArmor sha1 policy hashing enabled
[    0.856944] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.856957] evm: HMAC attrs: 0x1
[    0.858024]   Magic number: 1:617:622
[    0.858249] rtc_cmos 00:04: setting system clock to 2017-09-17 07:37:39 UTC (1505633859)
[    0.858386] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.858386] EDD information not available.
[    0.858429] PM: Hibernation image not present or could not be loaded.
[    0.859638] Freeing unused kernel memory: 2228K
[    0.859639] Write protecting the kernel read-only data: 14336k
[    0.859939] Freeing unused kernel memory: 1156K
[    0.860335] Freeing unused kernel memory: 268K
[    0.865273] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.873233] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.873282] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.873289] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.873666] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.873711] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.874559] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.874567] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.874757] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.874790] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.874817] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.892886] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    0.913497] hidraw: raw HID events driver (C) Jiri Kosina
[    0.915982] wmi: Mapper loaded
[    0.922719] [drm] Initialized
[    0.922908] nvme nvme0: pci function 0000:02:00.0
[    0.945331] Setting dangerous option enable_rc6 - tainting kernel
[    0.946062] [drm] Memory usable by graphics device = 4096M
[    0.946064] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[    0.946064] fb: switching to inteldrmfb from EFI VGA
[    0.946080] Console: switching to colour dummy device 80x25
[    0.946160] [drm] Replacing VGA console driver
[    0.951843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.951843] [drm] Driver supports precise vblank timestamp query.
[    0.959972] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    0.959974] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    0.961766] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.968290] [drm] GuC firmware load skipped
[    0.968304] [drm] RC6 disabled, disabling runtime PM support
[    0.970597] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.970858] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    0.970955] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    0.971873] fbcon: inteldrmfb (fb0) is primary device
[    1.034499]  nvme0n1: p1 p2 p3
[    1.129801] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.311602] usb 1-1: New USB device found, idVendor=13d3, idProduct=5618
[    1.311603] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.311604] usb 1-1: Product: EasyCamera
[    1.311604] usb 1-1: Manufacturer: AzureWave
[    1.311605] usb 1-1: SerialNumber: 0001
[    1.433862] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    1.576449] usb 1-5: New USB device found, idVendor=138a, idProduct=0094
[    1.576451] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.576451] usb 1-5: SerialNumber: deae88b91444
[    1.753872] usb 1-7: new low-speed USB device number 4 using xhci_hcd
[    1.794082] clocksource: Switched to clocksource tsc
[    1.897399] usb 1-7: New USB device found, idVendor=0461, idProduct=4d17
[    1.897400] usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.897401] usb 1-7: Product: USB Optical Mouse
[    1.900798] usbcore: registered new interface driver usbhid
[    1.900798] usbhid: USB HID core driver
[    1.901670] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0461:4D17.0001/input/input5
[    1.901730] hid-generic 0003:0461:4D17.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-7/input0
[    2.017696] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    2.154130] Console: switching to colour frame buffer device 240x67
[    2.159952] usb 1-8: New USB device found, idVendor=0cf3, idProduct=e300
[    2.159953] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.173660] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.206910] random: fast init done
[    2.234429] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.402685] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.402797] systemd[1]: Detected architecture x86-64.
[    2.403073] systemd[1]: Set hostname to <Samuel-Lenovo-YOGA-910-13IKB>.
[    2.476658] systemd[1]: Reached target User and Group Name Lookups.
[    2.476731] systemd[1]: Listening on Journal Audit Socket.
[    2.476749] systemd[1]: Listening on Syslog Socket.
[    2.476762] systemd[1]: Listening on udev Kernel Socket.
[    2.476786] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    2.476804] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.476809] systemd[1]: Reached target Encrypted Volumes.
[    2.524306] lp: driver loaded but no devices found
[    2.527818] ppdev: user-space parallel port driver
[    2.618851] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    2.640034] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    2.731141] Bluetooth: Core ver 2.22
[    2.731150] NET: Registered protocol family 31
[    2.731151] Bluetooth: HCI device and connection manager initialized
[    2.731153] Bluetooth: HCI socket layer initialized
[    2.731155] Bluetooth: L2CAP socket layer initialized
[    2.731158] Bluetooth: SCO socket layer initialized
[    2.731274] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.733894] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.737229] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.739081] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.739338] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.740257] Bluetooth: HCI UART driver ver 2.3
[    2.740258] Bluetooth: HCI UART protocol H4 registered
[    2.740259] Bluetooth: HCI UART protocol BCSP registered
[    2.740260] Bluetooth: HCI UART protocol LL registered
[    2.740260] Bluetooth: HCI UART protocol ATH3K registered
[    2.740261] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.740283] Bluetooth: HCI UART protocol Intel registered
[    2.740294] Bluetooth: HCI UART protocol Broadcom registered
[    2.740295] Bluetooth: HCI UART protocol QCA registered
[    2.740295] Bluetooth: HCI UART protocol AG6XX registered
[    2.740295] Bluetooth: HCI UART protocol Marvell registered
[    2.742865] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
[    2.743120] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    2.743415] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.752305] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.756921] usbcore: registered new interface driver btusb
[    2.761524] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    2.761525] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[    2.768625] media: Linux media interface: v0.10
[    2.784066] Linux video capture interface: v2.00
[    2.785882] [drm] RC6 off
[    2.791056] AVX2 version of gcm_enc/dec engaged.
[    2.791057] AES CTR mode by8 optimization enabled
[    2.791349] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    2.805588] uvcvideo: Found UVC 1.00 device EasyCamera (13d3:5618)
[    2.807130] uvcvideo: Failed to initialize entity for entity 6
[    2.807131] uvcvideo: Failed to register entites (-22).
[    2.807197] input: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input6
[    2.807244] usbcore: registered new interface driver uvcvideo
[    2.807245] USB Video Class driver (1.1.1)
[    2.824553] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.859440] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.885554] kvm: disabled by bios
[    2.897118] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.897120] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.897121] snd_hda_codec_generic hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.897127] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
[    2.897128] snd_hda_codec_generic hdaudioC0D0:    inputs:
[    2.897129] snd_hda_codec_generic hdaudioC0D0:      Mic=0x19
[    2.897131] snd_hda_codec_generic hdaudioC0D0:      Internal Mic=0x12
[    2.900851] intel_rapl: Found RAPL domain package
[    2.900852] intel_rapl: Found RAPL domain core
[    2.900853] intel_rapl: Found RAPL domain uncore
[    2.900853] intel_rapl: Found RAPL domain dram
[    2.920658] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    2.920695] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    2.920728] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.920760] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.920790] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.996130] random: crng init done
[    3.141866] Adding 8122364k swap on /dev/nvme0n1p3.  Priority:-1 extents:1 across:8122364k SSFS
[    3.200993] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    3.201002] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[    3.210175] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[    3.210177] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[    3.233724] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 17aa:0827
[    3.233726] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    3.234179] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[    3.305179] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7
[    3.440483] i2c_hid i2c-ITE8186:00: error in i2c_hid_init_report size:19 / ret_size:18
[    3.443344] input: SYNA7813:00 06CB:1785 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-SYNA7813:00/0018:06CB:1785.0002/input/input12
[    3.443476] hid-multitouch 0018:06CB:1785.0002: input,hidraw1: I2C HID v1.00 Device [SYNA7813:00 06CB:1785] on i2c-SYNA7813:00
[    3.451295] input: SYNA2B31:00 06CB:7F8C Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-SYNA2B31:00/0018:06CB:7F8C.0003/input/input18
[    3.451379] hid-multitouch 0018:06CB:7F8C.0003: input,hidraw2: I2C HID v1.00 Mouse [SYNA2B31:00 06CB:7F8C] on i2c-SYNA2B31:00
[    3.578221] audit: type=1400 audit(1505633862.215:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=675 comm="apparmor_parser"
[    3.578222] audit: type=1400 audit(1505633862.215:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=675 comm="apparmor_parser"
[    3.578939] audit: type=1400 audit(1505633862.215:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=672 comm="apparmor_parser"
[    3.578941] audit: type=1400 audit(1505633862.215:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=672 comm="apparmor_parser"
[    3.578941] audit: type=1400 audit(1505633862.215:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=672 comm="apparmor_parser"
[    3.578942] audit: type=1400 audit(1505633862.215:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=672 comm="apparmor_parser"
[    3.579399] audit: type=1400 audit(1505633862.215:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=671 comm="apparmor_parser"
[    3.579400] audit: type=1400 audit(1505633862.215:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=671 comm="apparmor_parser"
[    3.579459] audit: type=1400 audit(1505633862.215:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=676 comm="apparmor_parser"
[    3.743088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.743088] Bluetooth: BNEP filters: protocol multicast
[    3.743090] Bluetooth: BNEP socket layer initialized
[    5.468464] ath10k_pci 0000:01:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    5.552735] ath: EEPROM regdomain: 0x6c
[    5.552736] ath: EEPROM indicates we should expect a direct regpair map
[    5.552737] ath: Country alpha2 being used: 00
[    5.552738] ath: Regpair used: 0x6c
[    5.557466] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[    5.581100] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    7.928336] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    7.979446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   54.833074] wlp1s0: authenticate with c6:8c:76:eb:76:34
[   54.876979] wlp1s0: send auth to c6:8c:76:eb:76:34 (try 1/3)
[   54.878636] wlp1s0: authenticated
[   54.881691] wlp1s0: associate with c6:8c:76:eb:76:34 (try 1/3)
[   54.890629] wlp1s0: RX AssocResp from c6:8c:76:eb:76:34 (capab=0x411 status=0 aid=1)
[   54.893569] wlp1s0: associated
[   54.893635] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   57.210468] Bluetooth: RFCOMM TTY layer initialized
[   57.210473] Bluetooth: RFCOMM socket layer initialized
[   57.210477] Bluetooth: RFCOMM ver 1.11

Hors ligne

#8 Le 17/09/2017, à 12:42

koshieIsYourDaddy

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

moko138 a écrit :

Pas besoin d'être en root pour

dmesg

!

Si:

[LOCAL - framboise] [kgaspard] ~ $ dmesg
dmesg: échec de lecture du tampon de noyau: Opération non permise
[LOCAL - framboise] [kgaspard] ~ $ su -c 'dmesg'
Mot de passe :
[    0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.0-1-amd64 root=UUID=30149fa8-7b06-4fce-bcd0-d06c7fa2aabf ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:

Sur Debian, et sur Ubuntu quand tu utilises sudo... Bah t'es en root pour la commande.

Hors ligne

#9 Le 17/09/2017, à 13:34

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

koshieIsYourDaddy,

Voici dans ma Lubuntui :

$ dmesg | head -1
[    0.000000] Initializing cgroup subsys cpuset

Il est vrai que je n'utilise pas 16.04, qui fonctionne peut-être différemment.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#10 Le 17/09/2017, à 14:09

MicP

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Bonjour

Effectivement, depuis la version stretch (9) de debian, il faut les privilèges du compte root pour utiliser la commande dmesg
mais je ne sais pas si c'est le cas pour les récentes versions d'Ubuntu.

J'ai une machine virtuelle Ubuntu 16.04 dans laquelle dmesg fonctionne depuis le compte utilisateur non privilégié.

=======
En utilisant le retour de la commande dmesg du message #7 de Schmouel
et en recherchant les lignes contenant le mot (avec minuscules ou majuscules) fail :

michel@debg53sw:~$ grep -i fail retourDmesgDeSchmouel
[    0.959972] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    0.959974] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    2.807130] uvcvideo: Failed to initialize entity for entity 6
[    2.807131] uvcvideo: Failed to register entites (-22).
[    3.200993] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    3.201002] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[    3.210175] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
michel@debg53sw:~$ 

Même si, dans le retour donné dans le message #7, on peut voir que le début du retour de la commande dmesg est manquant,
on peut quand même constater que le noyau a essayé en vain de charger des fichiers firmwares pour la carte graphique et la (ou les) carte réseau.

Il est fort possible que les "…3 petites lignes blanches qui passent très vite et qui, me semble t il, contiennent un message d'erreur…"
correspondent à ces tentatives de chargement des fichiers firmwares par le noyau.

Je laisse ceux qui utilisent plus Ubuntu que moi
proposer la solution qui permettra l'installation de ces fichiers firmwares.

Dernière modification par MicP (Le 17/09/2017, à 14:13)

Hors ligne

#11 Le 17/09/2017, à 14:12

??

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Bonjour
Dmesg est une commande qui lit le contenu de diverses fichiers.   Cela dépend  donc de la façon dont ces fichiers sont protégés

u16041@u16041:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
u16041@u16041:~$ dmesg | head
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-93-generic (buildd@lgw01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #116-Ubuntu SMP Fri Aug 11 21:17:51 UTC 2017 (Ubuntu 4.4.0-93.116-generic 4.4.79)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-93-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
u16041@u16041:~$ 

Fais plutôt la commande

journalctl -xb

Si ne ne me trompe pas, les lignes que tu cherches devraient apparaître en rouge alors que  dmesg enlève la couleur.

Dernière modification par ?? (Le 17/09/2017, à 14:17)


Inutile de répondre que vous allez faire le plus rapidement possible  l'action qui vous est demandée, vous perdez du temps à répondre, je perds du temps à consulter votre réponse. Pourtant c'est sympathique mais ce n'est pas pratique.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Faire un état des lieux Avec https://doc.ubuntu-fr.org/tutoriel/boot-info

Hors ligne

#12 Le 17/09/2017, à 14:52

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

?? a écrit :

Fais plutôt la commande

journalctl -xb

Si ne ne me trompe pas, les lignes que tu cherches devraient apparaître en rouge alors que  dmesg enlève la couleur.

Voilà les messages qui apparaissent en rouge :

ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
...
i2c_hid i2c-ITE8186:00: error in i2c_hid_init_report size:19 / ret_size:18
...
Failed to obtain handles for "Service Changed" characteristic
...
el-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Error adding Link Loss service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Current Time Service could not be registered
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: gatt-time-server: Input/output error (5)
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Sap driver initialization failed.
sept. 17 09:37:42 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: sap-server: Operation not permitted (1)
...

Et là je mets résolu dans le titre du premier message et j'ouvre un nouveau post (des nouveaux posts ?) pour ces pb spécifiques ?

Hors ligne

#13 Le 17/09/2017, à 15:19

??

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Je te propose simplement de modifier le titre de ton message pour dire
Problème avec mon wifi et mon bluetoohh   Si tel est bien le cas

Mais tu peux déjà lire cela https://www.mail-archive.com/ath10k@lis … 06085.html
  but apparently the card is working anyway.
  So why does it try to load a firmware if it's not useful ?


et il y a aussi cela https://github.com/hadess/iio-sensor-proxy/issues/112

Dernière modification par ?? (Le 17/09/2017, à 15:28)


Inutile de répondre que vous allez faire le plus rapidement possible  l'action qui vous est demandée, vous perdez du temps à répondre, je perds du temps à consulter votre réponse. Pourtant c'est sympathique mais ce n'est pas pratique.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Faire un état des lieux Avec https://doc.ubuntu-fr.org/tutoriel/boot-info

Hors ligne

#14 Le 17/09/2017, à 15:23

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

C'est à 3,2 secondes qu'on a les trois lignes concernant ath10k_pci, mais ça semble résolu à 5,4" :

[    5.468464] ath10k_pci 0000:01:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1

Par contre ceci

[    5.557466] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0

est une trace d'une version du système antérieure à 16.04.
Donc merci de montrer

cat /etc/modules

et

cat /etc/udev/rules.d/70-persistent-net.rules | grep -E "wlan|wlp1s0"

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#15 Le 17/09/2017, à 15:44

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

cat /etc/modules
 # /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
cat /etc/udev/rules.d/70-persistent-net.rules | grep -E "wlan|wlp1s0"
 cat: /etc/udev/rules.d/70-persistent-net.rules: Aucun fichier ou dossier de ce type

Hors ligne

#16 Le 17/09/2017, à 16:20

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Merci !
Fausse piste, donc.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#17 Le 17/09/2017, à 16:49

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

?? a écrit :

Je te propose simplement de modifier le titre de ton message pour dire
Problème avec mon wifi et mon bluetoohh   Si tel est bien le cas

Mais tu peux déjà lire cela https://www.mail-archive.com/ath10k@lis … 06085.html
  but apparently the card is working anyway.
  So why does it try to load a firmware if it's not useful ?


et il y a aussi cela https://github.com/hadess/iio-sensor-proxy/issues/112


Malheureusement je ne suis pas plus à l'aise avec la langue anglaise qu'avec xubuntu smile

Je n'ai pas l'impression d'avoir de pb avec le wifi.
Je n'ai pas encore utilisé le bluetooth

Mais je me dis que s'il y a un message d'erreur c'est qu'il y a un pb à résoudre...

Hors ligne

#18 Le 17/09/2017, à 16:53

xubu1957

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Bonjour,

Fournis les retours :

uname -a; lspci -nnk | grep -iA2 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
sudo service bluetooth status

et :

dpkg -l | grep blue

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

En ligne

#19 Le 17/09/2017, à 17:14

moko138

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Schmouel a écrit :

Mais je me dis que s'il y a un message d'erreur c'est qu'il y a un pb à résoudre...

Tu sais, nous avons tous des messages d'erreur. Ex. chez moi :

$ dmesg |grep -Ei "fail|error|unable"
[    0.161223]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[   14.680637] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   34.542437] init: failsafe main process (1412) killed by TERM signal
[ 3969.888284] pcmanfm[2958]: segfault at 0 ip b6d64a99 sp bfb89340 error 4 in libglib-2.0.so.0.3200.4[b6cf1000+f7000]

Sur ces quatre lignes, une seule correspond à un problème concret. Mais qui n'empêche pas mon système de tourner.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#20 Le 17/09/2017, à 17:23

Schmouel

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

xubu1957 a écrit :

Bonjour,

Fournis les retours :

uname -a; lspci -nnk | grep -iA2 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
sudo service bluetooth status

et :

dpkg -l | grep blue

[

 Linux Samuel-Lenovo-YOGA-910-13IKB 4.10.0-33-generic #37~16.04.1-Ubuntu SMP Fri Aug 11 14:07:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
01:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
	Subsystem: Lenovo QCA6174 802.11ac Wireless Network Adapter [17aa:0827]
	Kernel driver in use: ath10k_pci
	Kernel modules: ath10k_pci
Bus 002 Device 006: ID 174c:5136 ASMedia Technology Inc. ASM1053 SATA 6Gb/s bridge
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0cf3:e300 Atheros Communications, Inc. 
Bus 001 Device 003: ID 138a:0094 Validity Sensors, Inc. 
Bus 001 Device 002: ID 13d3:5618 IMC Networks 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    2.731141] Bluetooth: Core ver 2.22
[    2.731151] Bluetooth: HCI device and connection manager initialized
[    2.731153] Bluetooth: HCI socket layer initialized
[    2.731155] Bluetooth: L2CAP socket layer initialized
[    2.731158] Bluetooth: SCO socket layer initialized
[    2.740257] Bluetooth: HCI UART driver ver 2.3
[    2.740258] Bluetooth: HCI UART protocol H4 registered
[    2.740259] Bluetooth: HCI UART protocol BCSP registered
[    2.740260] Bluetooth: HCI UART protocol LL registered
[    2.740260] Bluetooth: HCI UART protocol ATH3K registered
[    2.740261] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.740283] Bluetooth: HCI UART protocol Intel registered
[    2.740294] Bluetooth: HCI UART protocol Broadcom registered
[    2.740295] Bluetooth: HCI UART protocol QCA registered
[    2.740295] Bluetooth: HCI UART protocol AG6XX registered
[    2.740295] Bluetooth: HCI UART protocol Marvell registered
[    2.761524] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    2.761525] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[    2.791349] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    3.743088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.743088] Bluetooth: BNEP filters: protocol multicast
[    3.743090] Bluetooth: BNEP socket layer initialized
[   57.210468] Bluetooth: RFCOMM TTY layer initialized
[   57.210473] Bluetooth: RFCOMM socket layer initialized
[   57.210477] Bluetooth: RFCOMM ver 1.11
[ 8815.294974] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 8815.294975] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 8815.322814] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    0.146968] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.959972] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    0.959974] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    0.968290] [drm] GuC firmware load skipped
[    2.761525] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[    3.200993] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    3.201002] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[    3.210175] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[    3.210177] ath10k_pci 0000:01:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[    3.234179] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 8814.303619] [drm] GuC firmware load skipped
[ 8815.294975] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
bluetooth             557056  41 btrtl,hci_uart,btintel,btqca,bnep,btbcm,rfcomm,btusb
 ● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since dim. 2017-09-17 09:37:42 CEST; 8h ago
     Docs: man:bluetoothd(8)
 Main PID: 698 (bluetoothd)
   Status: "Running"
   CGroup: /system.slice/bluetooth.service
           └─698 /usr/lib/bluetooth/bluetoothd

sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Error adding Link Loss service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Current Time Service could not be registered
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: gatt-time-server: Input/output error (5)
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Not enough free handles to register service
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: Sap driver initialization failed.
sept. 17 12:04:51 Samuel-Lenovo-YOGA-910-13IKB bluetoothd[698]: sap-server: Operation not permitted (1)
 
 samuel@Samuel-Lenovo-YOGA-910-13IKB:~$ dpkg -l | grep blue
ii  blueman                                2.0.4-1ubuntu2                               amd64        Graphical bluetooth manager
ii  bluez                                  5.37-0ubuntu5.1                              amd64        Bluetooth tools and daemons
ii  bluez-cups                             5.37-0ubuntu5.1                              amd64        Bluetooth printer driver for CUPS
ii  bluez-obexd                            5.37-0ubuntu5.1                              amd64        bluez obex daemon
ii  libbluetooth3:amd64                    5.37-0ubuntu5.1                              amd64        Library to use the BlueZ Linux Bluetooth stack

Hors ligne

#21 Le 17/09/2017, à 17:28

ar barzh paour

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

info concernant les couleurs chez moi

uname -a
Linux jpb-desktop 4.4.0-93-generic #116-Ubuntu SMP Fri Aug 11 21:17:51 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

avec dmesg
vert    /   ocre   /     rouge
[ 2469.184137] FAT-fs (sdd1): unable to read boot sector to mark fs as dirty

avec journalctl -xb
blanc        /       rouge
sept. 17 10:13:02 jpb-desktop kernel: FAT-fs (sdd1): unable to read boot sector to mark fs as dirty

Dernière modification par ar barzh paour (Le 17/09/2017, à 17:29)


Ubuntu 16.04 64 bits (depuis juillet 2016) , gnome3 en essai (juin 2017)
divers versions Ubuntu et Studio 14.04 LTS 64 bits , MATE 16.04
(01/2017 ) :PC          : Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz 2Go de RAM 800 MHz
(06/2017) : Portable : Intel(R) Core(TM)2  Duo CPU     T5750  @ 2.00GHz 3Go de RAM DDR2 667 Mhz

Hors ligne

#22 Le 17/09/2017, à 17:30

xubu1957

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Dans ton premier retour :

Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
	Subsystem: Lenovo QCA6174 802.11ac Wireless Network Adapter [17aa:0827]
	Kernel driver in use: ath10k_pci

La même carte que Sweery , regarde dans sa discussion [Résolu] : MSI GS60 6QC 231XFR -- Ubuntu 16.04 -- Bluetooth inexistant


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

En ligne

#23 Le 14/11/2017, à 14:58

xubu1957

Re : Message d'erreur qui passe vite au démarrage = pb wifi et bluetooth

Bonjour,

Une proposition de solution :

Le 14/11/2017, prog-amateur a écrit :

Merci beaucoup pour ton retour. Eh bien finalement, c'est encore plus vicieux... mais plus simple heureusement ! J'ai trouvé la solution sur ce forum :
http://forum.hardware.fr/hfr/Hardware/c … 3700_1.htm

Apparemment, ma carte mère ne peut faire fonctionner le Bluetooth que si l'antenne Wifi est branchée (le chipset utilise l'antenne wifi pour connecter les périphériques Bluetooth). Je ne me l'imaginais pas car je pouvais me connecter en Wifi sans l'antenne et le Bluetooth semblait fonctionnel.

Bref, du coup, pas de problème de pilote : juste brancher l'antenne et ça marche sur le champ. Mes manettes et le reste sont reconnues.

Problème résolu. J'espère que ça aidera d'autres personnes qui comme moi n'ont pas branché leur antenne Wifi.


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

En ligne