Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#26 Le 06/09/2012, à 13:13

malbo

Re : Aide pour une bonne installation optimisée

arnaud.saussereau a écrit :

ok merci Pacifick_FR42, maintenant reste à savoir pourquoi sur les deux 12.04 que j'ai essayé ça ne fonctionnais pas et qu'avec la 10.04 sa fonctionnais.

A première vue, on dirait un bug. Tu peux commencer par remplacer la souris par une vielle souris à boule et ton clavier par un vieux clavier avec leurs connecteurs à l'ancienne (pas de connexion par USB) et voir si ça résout le problème pour Ubuntu 12.04. Mais si ça te fatigue et que tu ne veux pas passer du temps pour déboguer Ubuntu 12.04, tu installes une autre distribution qui n'a pas ce problème, ou bien tu gardes Ubuntu 10.04 (c'est la meilleure version à mon goût. C'est costaud comme du XP. Elle sera maintenue - c'est à dire mise à jour - jusqu'en Avril 2013).

Dernière modification par malbo (Le 06/09/2012, à 13:15)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#27 Le 06/09/2012, à 13:24

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

Michel.04 : Oui je sais que c'est un version optimisée, mais par contre je ne sais pas si c'est une version en 32bits ou en 64bits. Et si c'est en 64bits, je serais tenté de la garder.
Y à t-il un moyen pour vérifier si c'est en 32 ou 64 bits?

Malbo: Oui comme tu le dit,on dirais un bug de la 12.04. Je n'ai pas d'autre souris ou clavier, donc pas moyen de tester avec d'autres matériels. Par contre ma souris et mon clavier ne sont pas connectés en USB mais avec leurs connecteurs à l'ancienne (je ne connais pas le nom de ces connecteurs).

Hors ligne

#28 Le 06/09/2012, à 13:35

michel_04

Re : Aide pour une bonne installation optimisée

Re,

uname -a

A+

En ligne

#29 Le 06/09/2012, à 13:40

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

ok merci michel !! Je teste ça ce soir en rentrant !
Entre temps j'ai envoyé un mail à pcubuntoo pour leur demander, je vais bien voir si il me réponde.

Encore merci pour ton aide, et rapide en plus !!

Hors ligne

#30 Le 06/09/2012, à 13:46

michel_04

Re : Aide pour une bonne installation optimisée

Re,

i386 = 32bits ---> le lien de download de leur CD :

uname -a sur ce PC en 64bits :

3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

A+

Dernière modification par michel_04 (Le 06/09/2012, à 13:49)

En ligne

#31 Le 06/09/2012, à 14:10

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

Et m..... !!! Moi qui cherche une version en 64bits !

Il me reste plus qu'à regarder où trouver une 10.04 L.T.S ubuntu ou sur d'autre distri (mais là je connais pas et je ne sais pas laquelle prendre).

En tout cas merci à toi pour l'info !

Hors ligne

#32 Le 07/09/2012, à 12:38

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

J'ai finalement décidé de rester sur cette version d'ubuntu 10.04 LTS qui est en 32bit et je me pose la question suivante:
Ma carte mère est en bios EFI, est-ce que je peut installer cette version d'ubuntu en mode EFI? Car j'ai cru comprendre que pour installer ubuntu en mode EFI il fallait la version 12.04.1 officiel ! Est-ce vrai?
Si oui est-ce que je peut quand même installer cette version mais en bios classique (à l’ancienne quoi ) ?

Hors ligne

#33 Le 07/09/2012, à 12:59

michel_04

Re : Aide pour une bonne installation optimisée

Re,

arnaud.saussereau a écrit :

J'ai finalement décidé de rester sur cette version d'ubuntu 10.04 LTS qui est en 32bit et je me pose la question suivante:
Ma carte mère est en bios EFI, est-ce que je peut installer cette version d'ubuntu en mode EFI? Car j'ai cru comprendre que pour installer ubuntu en mode EFI il fallait la version 12.04.1 officiel ! Est-ce vrai?

C'est vrai, ou alors la version Ubuntu-Secure-Remix 64bits

Si oui est-ce que je peut quand même installer cette version mais en bios classique (à l’ancienne quoi ) ?

À priori, oui en installant  sur ton HDD USB, tu ne touches rien sur ton PC.
Mais, est ce qu'en laissant EFI dans ton BIOS, (amha, obligé pour ton Windows installé en EFI), tonOS sur USB pourra-t-il démarrer ? Jamais essayé.
Attends un peu que ceux qui ont déjà testé te répondent.

A+

En ligne

#34 Le 07/09/2012, à 13:37

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

Le souci c'est qu'avec Ubuntu-Secure-Remix 64bits j'ai pas de clavier ni de souris (comme dit dans mes précédent messages).
Sinon je n'est pas de windows car c'est un pc neuf (reçu en pièces et monté moi-même) d'où ma question de savoir si je peut installer ubuntu comme on le faisait avant avec l'ancien bios (même si ma carte mère est avec le mode EFI) ?

Hors ligne

#35 Le 07/09/2012, à 14:15

michel_04

Re : Aide pour une bonne installation optimisée

Re,

arnaud.saussereau a écrit :

même si ma carte mère est avec le mode EFI ?

Dans le BIOS tu devrais sans doute avoir le choix de démarrer en mode EFI ou mode normal, non ?

A+

En ligne

#36 Le 07/09/2012, à 14:19

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

Je n'est pas fait gaf à ça, je regarde sa ce soir.

Hors ligne

#37 Le 07/09/2012, à 14:59

mloupiot

Re : Aide pour une bonne installation optimisée

Euh, je crois qu'il y a confusion, là : on peut démarrer en mode EFI et faire une installe classique d'ubuntu (en tout cas, c'est ce que j'ai fait avec une cubuntu 12.04). Il n'est obligatoire d'installer en mode EFI que si un autre OS en mode EFI est déjà présent sur l'ordinateur http://doc.ubuntu-fr.org/efi

Ajout : visiblement j'ai dit une ânerie, là → voir post suivant de malbo

Dernière modification par mloupiot (Le 07/09/2012, à 16:32)

Hors ligne

#38 Le 07/09/2012, à 15:25

malbo

Re : Aide pour une bonne installation optimisée

mloupiot a écrit :

on peut démarrer en mode EFI et faire une installe classique d'ubuntu

Si par "installe classique d'ubuntu", tu entends installation en mode Bios, non ce n'est pas possible. Si tu veux faire une installation en mode Bios de Ubuntu, tu dois démarrer en mode Bios sur le support d'installation. De même que si tu veux faire une installation en mode EFI de Ubuntu, tu dois démarrer en mode EFI sur ton support d'installation. Je parle de façons correctes de faire les choses logiquement et "bien du premier coup". Parce que pour réparer une installation faite n'importe comment, il est vrai qu'il y a moyen d'utiliser Boot-Repair pour réparer mais ce n'est pas normal.


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#39 Le 07/09/2012, à 15:41

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

Merci à tous pour votre aide mais là .... je suis complètement perdu !

Qu'est-ce que je doit faire? Sachant:
- que mon PC est neuf ET SANS WINDOWS,
- qu'avec ubuntu 12.04 64bits, ubuntu secure (pas essayé avec ubuntu 32bits, je test ce soir) mon clavier et ma souri sont figés
- que ma carte mére est en mode EFI (je regarde ce soir si possible de passer un mode ancien bios)
- qu'avec ubuntu 10.04LTS 32 bits mon clavier et ma sourit fonctionne mais installation en mode EFI impossible (apparemment)

Help me !!

Hors ligne

#40 Le 07/09/2012, à 16:38

mloupiot

Re : Aide pour une bonne installation optimisée

@ malbo j'en déduis donc que lors de l'installation, j'étais en mode bios (j'ai suivi le tuto cité dans mon post précédent, tout s'est bien passé : redémarrage sans problème etc …). Se pose une question : y a-t-il un intérêt à être en mode EFI ? Mais je devrais peut-être ouvrir une autre discussion …

Hors ligne

#41 Le 07/09/2012, à 16:43

malbo

Re : Aide pour une bonne installation optimisée

@mloupiot : poste dans cette discussion : http://forum.ubuntu-fr.org/viewtopic.php?id=986671

@arnaud.saussereau : démarre ton PC sur le liveCD Ubuntu 10.04LTS 32 bits et réponds à cette demande : http://doc.ubuntu-fr.org/tutoriel/boot-info
Comme ça on aura un état des lieux avant travaux


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#42 Le 07/09/2012, à 16:48

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

mloupiot a écrit :

@ malbo j'en déduis donc que lors de l'installation, j'étais en mode bios (j'ai suivi le tuto cité dans mon post précédent, tout s'est bien passé : redémarrage sans problème etc …). Se pose une question : y a-t-il un intérêt à être en mode EFI ? Mais je devrais peut-être ouvrir une autre discussion …

moi aussi cette question m’intéresse ! Hormis le fait qu'il y a plus d'information (et de possibilité ?) et que c'est utilisable à la souri, le reste je voie pas.

Hors ligne

#43 Le 08/09/2012, à 07:39

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

J'ai tester avec la ubuntu 12.04 en 32bits, idem que les autres, souri et clavier figé
Sinon je n'ai pas réussi à voir si je peut démarrer en bios classique avec ma carte mère

malbo: j'ai fait le boot info comme demandé en espérant que ça puisse aider

boot-info

merci

Dernière modification par arnaud.saussereau (Le 08/09/2012, à 08:13)

Hors ligne

#44 Le 08/09/2012, à 09:08

malbo

Re : Aide pour une bonne installation optimisée

Extrait de ton Boot-Info :

=================== parted -l:

Model: ATA ST3160812AS (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start  End  Size  Type  File system  Flags


Model: ATA Hitachi HDT72505 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start  End  Size  Type  File system  Flags


Model:  USB Flash Memory (scsi)
Disk /dev/sdc: 2024MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  2024MB  2024MB  primary  fat32        boot

Ta liveUSB apparait comme partitionnée (une partition FAT32 qui occupe la totalité de l'espace disponible de ta clé USB ), par contre tes deux disques durs apparaissent comme non partitionnés (la totalité de leur espace est non allouée à la moindre partition).
Tu as expliqué dans le post #1 que tu avais un SSD or on ne voit pas de SSD là-dedans : on voit un disque dur Hitachi HDT72505 de 500 Go et un disque dur Seagate ST3160812AS.
Il est où le SSD ?

Dernière modification par malbo (Le 08/09/2012, à 09:22)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#45 Le 08/09/2012, à 09:21

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

C'est louche ça ! Ok pour mes deux DD car je l'ai avait formater pour qu'il soit propre (façon de parler) avant de m'en servir. Pour la live USB ok aussi (fait avec linux live ESB) par contre ce qui m'étonne c'est que lorsque que j’accède au menu bios pour sélectionner ma clé usb pour booter dessus, j'ai également mon disque SSD 830 séries (SSD samsung 64GO) et il n’apparaît pas dans le boot-info?!

Hors ligne

#46 Le 08/09/2012, à 09:26

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

j'ai oublié de préciser, en live usb lorsque je tape la commande

[[ -d /sys/firmware/efi ]] && echo "Session EFI" || echo "Session non-EFI"

il me dit non-EFI

Hors ligne

#47 Le 08/09/2012, à 09:44

malbo

Re : Aide pour une bonne installation optimisée

Merci pour l'info sur "non-EFI" mais ça figure déjà dans le Boot-Info.
Peux-tu passer cette commande dans un terminal :

dmesg > dmesg.txt

elle va créer une copie de ton fichier /var/log/dmesg dans un fichier texte nommé dmesg.txt qui sera créé dans ton dossier personnel. Tu copieras le contenu de ce fichier et tu le colleras dans ta réponse en utilisant les balises code : http://doc.ubuntu-fr.org/tutoriel/howto … ne_reponse
Le type de balises dont je veux parler correspond à ce descriptif dans le lien :

 Le texte inséré entre les balises code sera affiché avec une police type "console". De plus, si la longueur du texte dépasse un certain nombre de lignes, il sera mis dans un cadre avec une barre de défilement sur le côté.

C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères. 

Dernière modification par malbo (Le 08/09/2012, à 09:45)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

En ligne

#48 Le 08/09/2012, à 10:04

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

le resultat de la commande

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000bec93000 (usable)
[    0.000000]  BIOS-e820: 00000000bec93000 - 00000000becda000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000becda000 - 00000000bece2000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bece2000 - 00000000bee08000 (reserved)
[    0.000000]  BIOS-e820: 00000000bee08000 - 00000000bee09000 (usable)
[    0.000000]  BIOS-e820: 00000000bee09000 - 00000000bee0c000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bee0c000 - 00000000bee0d000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bee0d000 - 00000000bee16000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bee16000 - 00000000bee3e000 (reserved)
[    0.000000]  BIOS-e820: 00000000bee3e000 - 00000000bee81000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bee81000 - 00000000bf000000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012fe00000 (usable)
[    0.000000] DMI 2.7 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D7FFF write-protect
[    0.000000]   D8000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 12FE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 130000000 mask FF0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009d800 (usable)
[    0.000000]  modified: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  modified: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  modified: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  modified: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  modified: 0000000040200000 - 00000000bec93000 (usable)
[    0.000000]  modified: 00000000bec93000 - 00000000becda000 (ACPI NVS)
[    0.000000]  modified: 00000000becda000 - 00000000bece2000 (ACPI data)
[    0.000000]  modified: 00000000bece2000 - 00000000bee08000 (reserved)
[    0.000000]  modified: 00000000bee08000 - 00000000bee09000 (usable)
[    0.000000]  modified: 00000000bee09000 - 00000000bee0c000 (ACPI NVS)
[    0.000000]  modified: 00000000bee0c000 - 00000000bee0d000 (ACPI data)
[    0.000000]  modified: 00000000bee0d000 - 00000000bee16000 (ACPI NVS)
[    0.000000]  modified: 00000000bee16000 - 00000000bee3e000 (reserved)
[    0.000000]  modified: 00000000bee3e000 - 00000000bee81000 (ACPI NVS)
[    0.000000]  modified: 00000000bee81000 - 00000000bf000000 (usable)
[    0.000000]  modified: 00000000bf800000 - 00000000cfa00000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed40000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 000000012fe00000 (usable)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 1f355000 - 1fffec13
[    0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT becda068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP bece16f0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT becda150 0759B (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS bee0df80 00040
[    0.000000] ACPI: APIC bece17e8 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT bece1850 00098 (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG bece18e8 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: AAFT bece1928 000BA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET bece19e8 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2168MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
[    0.000000]   #4 [001f355000 - 001fffec13]          RAMDISK ==> [001f355000 - 001fffec13]
[    0.000000]   #5 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
[    0.000000]   #6 [00008de000 - 00008e115c]              BRK ==> [00008de000 - 00008e115c]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00fcef0] fcef0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000bf000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000bec93
[    0.000000]     0: 0x000bee08 -> 0x000bee09
[    0.000000]     0: 0x000bee81 -> 0x000bf000
[    0.000000] On node 0 totalpages: 780704
[    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 220974 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4337 pages used for memmap
[    0.000000]   HighMem zone: 549668 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36056 r0 d21288 u2097152
[    0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 774591
[    0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] allocated 15646400 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000bf000)
[    0.000000] Memory: 3060080k/3129344k available (4679k kernel code, 61768k reserved, 2124k data, 660k init, 2216020k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
[    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000]   alloc irq_desc for 24 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000]   alloc irq_desc for 25 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000] HPET: 8 timers in total, 2 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2693.908 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.81 BogoMIPS (lpj=10775632)
[    0.000012] Security Framework initialized
[    0.000020] AppArmor: AppArmor initialized
[    0.000024] Mount-cache hash table entries: 512
[    0.000091] Initializing cgroup subsys ns
[    0.000093] Initializing cgroup subsys cpuacct
[    0.000096] Initializing cgroup subsys memory
[    0.000100] Initializing cgroup subsys devices
[    0.000102] Initializing cgroup subsys freezer
[    0.000103] Initializing cgroup subsys net_cls
[    0.000117] CPU: Physical Processor ID: 0
[    0.000118] CPU: Processor Core ID: 0
[    0.000121] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000122] CPU: L2 cache: 256K
[    0.000123] CPU: L3 cache: 3072K
[    0.000127] mce: CPU supports 7 MCE banks
[    0.000137] CPU0: Thermal monitoring enabled (TM1)
[    0.000139] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6
[    0.000147] using mwait in idle threads.
[    0.000150] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.000155] ... version:                3
[    0.000156] ... bit width:              48
[    0.000157] ... generic registers:      8
[    0.000158] ... value mask:             0000ffffffffffff
[    0.000160] ... max period:             000000007fffffff
[    0.000161] ... fixed-purpose events:   3
[    0.000162] ... event mask:             00000007000000ff
[    0.000165] Checking 'hlt' instruction... OK.
[    0.014642] ACPI: Core revision 20090903
[    0.024837] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.024839] ftrace: allocating 21780 entries in 43 pages
[    0.032113] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072153] CPU0: Intel(R) Pentium(R) CPU G630 @ 2.70GHz stepping 07
[    0.176301] Booting processor 1 APIC 0x2 ip 0x6000
[    0.186524] Initializing CPU#1
[    0.264199] CPU: Physical Processor ID: 0
[    0.264200] CPU: Processor Core ID: 1
[    0.264202] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.264203] CPU: L2 cache: 256K
[    0.264204] CPU: L3 cache: 3072K
[    0.264217] CPU1: Thermal monitoring enabled (TM1)
[    0.264219] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6
[    0.264311] CPU1: Intel(R) Pentium(R) CPU G630 @ 2.70GHz stepping 07
[    0.264321] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.284332] Brought up 2 CPUs
[    0.284333] Total of 2 processors activated (10775.33 BogoMIPS).
[    0.284823] CPU0 attaching sched-domain:
[    0.284827]  domain 0: span 0-1 level MC
[    0.284828]   groups: 0 1
[    0.284833] CPU1 attaching sched-domain:
[    0.284834]  domain 0: span 0-1 level MC
[    0.284836]   groups: 1 0
[    0.284950] devtmpfs: initialized
[    0.285190] regulator: core version 0.5
[    0.285219] Time: 14:26:36  Date: 09/08/12
[    0.285245] NET: Registered protocol family 16
[    0.285310] Trying to unpack rootfs image as initramfs...
[    0.285321] EISA bus registered
[    0.285326] ACPI: bus type pci registered
[    0.285373] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.285376] PCI: Not using MMCONFIG.
[    0.300877] PCI: Using configuration type 1 for base access
[    0.312437] bio: create slab <bio-0> at 0
[    0.313101] ACPI: EC: Look up EC in DSDT
[    0.315261] ACPI: Executed 1 blocks of module-level executable AML code
[    0.319459] ACPI: Interpreter enabled
[    0.319470] ACPI: (supports S0 S1 S3 S4 S5)
[    0.319485] ACPI: Using IOAPIC for interrupt routing
[    0.319520] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.319619] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.319620] PCI: Using MMCONFIG for extended config space
[    0.319746] ACPI: BIOS _OSI(Linux) query ignored
[    0.325688] ACPI: No dock devices found.
[    0.326032] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.326094] pci 0000:00:02.0: reg 10 64bit mmio: [0xfb400000-0xfb7fffff]
[    0.326099] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.326103] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
[    0.326198] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbc07000-0xfbc0700f]
[    0.326263] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.326268] pci 0000:00:16.0: PME# disabled
[    0.326349] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbc06000-0xfbc063ff]
[    0.326426] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.326431] pci 0000:00:1a.0: PME# disabled
[    0.326489] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbc00000-0xfbc03fff]
[    0.326551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.326555] pci 0000:00:1b.0: PME# disabled
[    0.326655] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.326659] pci 0000:00:1c.0: PME# disabled
[    0.326762] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.326766] pci 0000:00:1c.1: PME# disabled
[    0.326869] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.326874] pci 0000:00:1c.2: PME# disabled
[    0.326976] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.326980] pci 0000:00:1c.3: PME# disabled
[    0.327083] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.327087] pci 0000:00:1c.4: PME# disabled
[    0.327165] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbc05000-0xfbc053ff]
[    0.327243] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.327248] pci 0000:00:1d.0: PME# disabled
[    0.327425] pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
[    0.327432] pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
[    0.327440] pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
[    0.327447] pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
[    0.327454] pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df]
[    0.327461] pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf]
[    0.327529] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbc04000-0xfbc040ff]
[    0.327548] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
[    0.327611] pci 0000:00:1f.5: reg 10 io port: [0xf0b0-0xf0b7]
[    0.327619] pci 0000:00:1f.5: reg 14 io port: [0xf0a0-0xf0a3]
[    0.327626] pci 0000:00:1f.5: reg 18 io port: [0xf090-0xf097]
[    0.327633] pci 0000:00:1f.5: reg 1c io port: [0xf080-0xf083]
[    0.327640] pci 0000:00:1f.5: reg 20 io port: [0xf070-0xf07f]
[    0.327648] pci 0000:00:1f.5: reg 24 io port: [0xf060-0xf06f]
[    0.327938] pci 0000:00:1c.1: transparent bridge
[    0.327945] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[    0.328039] pci 0000:03:00.0: reg 10 32bit mmio: [0xfbb00000-0xfbb0ffff]
[    0.328273] pci 0000:02:00.0: transparent bridge
[    0.328290] pci 0000:02:00.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[    0.328392] pci 0000:04:00.0: reg 10 64bit mmio: [0xfba00000-0xfba3ffff]
[    0.328403] pci 0000:04:00.0: reg 18 io port: [0xe000-0xe07f]
[    0.328499] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.328505] pci 0000:04:00.0: PME# disabled
[    0.328585] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]
[    0.328589] pci 0000:00:1c.2: bridge 32bit mmio: [0xfba00000-0xfbafffff]
[    0.328688] pci 0000:05:00.0: reg 10 64bit mmio: [0xfb900000-0xfb907fff]
[    0.328810] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.328816] pci 0000:05:00.0: PME# disabled
[    0.328898] pci 0000:00:1c.3: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
[    0.328970] pci 0000:06:00.0: reg 10 io port: [0xd040-0xd047]
[    0.328980] pci 0000:06:00.0: reg 14 io port: [0xd030-0xd033]
[    0.328991] pci 0000:06:00.0: reg 18 io port: [0xd020-0xd027]
[    0.329002] pci 0000:06:00.0: reg 1c io port: [0xd010-0xd013]
[    0.329012] pci 0000:06:00.0: reg 20 io port: [0xd000-0xd00f]
[    0.329023] pci 0000:06:00.0: reg 24 32bit mmio: [0xfb800000-0xfb8001ff]
[    0.329158] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    0.329162] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb800000-0xfb8fffff]
[    0.329204] pci_bus 0000:00: on NUMA node 0
[    0.329207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.329334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.329374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.329415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1.PCIB._PRT]
[    0.329468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.329506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.329544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.333444] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.333521] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.333596] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333669] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333742] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.333816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.333891] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.333965] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.334035] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.334043] vgaarb: loaded
[    0.334115] SCSI subsystem initialized
[    0.334170] libata version 3.00 loaded.
[    0.334209] usbcore: registered new interface driver usbfs
[    0.334216] usbcore: registered new interface driver hub
[    0.334229] usbcore: registered new device driver usb
[    0.334305] ACPI: WMI: Mapper loaded
[    0.334306] PCI: Using ACPI for IRQ routing
[    0.334450] NetLabel: Initializing
[    0.334451] NetLabel:  domain hash size = 128
[    0.334452] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.334461] NetLabel:  unlabeled traffic allowed by default
[    0.334486] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0
[    0.334491] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.340183] hpet: hpet2 irq 24 for MSI
[    0.340408] hpet: hpet3 irq 25 for MSI
[    0.340423] Switching to clocksource tsc
[    0.341887] AppArmor: AppArmor Filesystem Enabled
[    0.341895] pnp: PnP ACPI init
[    0.341904] ACPI: bus type pnp registered
[    0.344919] pnp: PnP ACPI: found 17 devices
[    0.344921] ACPI: ACPI bus type pnp unregistered
[    0.344923] PnPBIOS: Disabled by ACPI PNP
[    0.344931] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
[    0.344933] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.344935] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.344937] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.344939] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.344943] system 00:02: ioport range 0x290-0x29f has been reserved
[    0.344948] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.344953] system 00:0e: ioport range 0x400-0x453 has been reserved
[    0.344954] system 00:0e: ioport range 0x458-0x47f has been reserved
[    0.344956] system 00:0e: ioport range 0x1180-0x119f has been reserved
[    0.344958] system 00:0e: ioport range 0x500-0x57f has been reserved
[    0.344960] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.344962] system 00:0e: iomem range 0xfec00000-0xfecfffff could not be reserved
[    0.344963] system 00:0e: iomem range 0xfed08000-0xfed08fff has been reserved
[    0.344965] system 00:0e: iomem range 0xff000000-0xffffffff has been reserved
[    0.344969] system 00:0f: ioport range 0x454-0x457 has been reserved
[    0.379646] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.379648] pci 0000:00:1c.0:   IO window: disabled
[    0.379654] pci 0000:00:1c.0:   MEM window: disabled
[    0.379659] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.379666] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[    0.379668] pci 0000:02:00.0:   IO window: disabled
[    0.379677] pci 0000:02:00.0:   MEM window: 0xfbb00000-0xfbbfffff
[    0.379683] pci 0000:02:00.0:   PREFETCH window: disabled
[    0.379694] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.379695] pci 0000:00:1c.1:   IO window: disabled
[    0.379701] pci 0000:00:1c.1:   MEM window: 0xfbb00000-0xfbbfffff
[    0.379706] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.379713] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.379716] pci 0000:00:1c.2:   IO window: 0xe000-0xefff
[    0.379722] pci 0000:00:1c.2:   MEM window: 0xfba00000-0xfbafffff
[    0.379727] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.379734] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[    0.379735] pci 0000:00:1c.3:   IO window: disabled
[    0.379741] pci 0000:00:1c.3:   MEM window: 0xfb900000-0xfb9fffff
[    0.379746] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.379753] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[    0.379756] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    0.379762] pci 0000:00:1c.4:   MEM window: 0xfb800000-0xfb8fffff
[    0.379767] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.379786]   alloc irq_desc for 17 on node -1
[    0.379787]   alloc kstat_irqs on node -1
[    0.379792] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.379797] pci 0000:00:1c.0: setting latency timer to 64
[    0.379807]   alloc irq_desc for 16 on node -1
[    0.379808]   alloc kstat_irqs on node -1
[    0.379810] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.379815] pci 0000:00:1c.1: setting latency timer to 64
[    0.379821] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.379827] pci 0000:02:00.0: setting latency timer to 64
[    0.379838]   alloc irq_desc for 18 on node -1
[    0.379839]   alloc kstat_irqs on node -1
[    0.379842] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.379846] pci 0000:00:1c.2: setting latency timer to 64
[    0.379856]   alloc irq_desc for 19 on node -1
[    0.379857]   alloc kstat_irqs on node -1
[    0.379859] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.379863] pci 0000:00:1c.3: setting latency timer to 64
[    0.379873] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.379878] pci 0000:00:1c.4: setting latency timer to 64
[    0.379882] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.379884] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.379886] pci_bus 0000:02: resource 1 mem: [0xfbb00000-0xfbbfffff]
[    0.379888] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.379889] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.379891] pci_bus 0000:03: resource 1 mem: [0xfbb00000-0xfbbfffff]
[    0.379892] pci_bus 0000:03: resource 4 mem: [0xfbb00000-0xfbbfffff]
[    0.379894] pci_bus 0000:03: resource 6 io:  [0x00-0xffff]
[    0.379895] pci_bus 0000:03: resource 7 mem: [0x000000-0xffffffff]
[    0.379897] pci_bus 0000:04: resource 0 io:  [0xe000-0xefff]
[    0.379898] pci_bus 0000:04: resource 1 mem: [0xfba00000-0xfbafffff]
[    0.379900] pci_bus 0000:05: resource 1 mem: [0xfb900000-0xfb9fffff]
[    0.379902] pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
[    0.379903] pci_bus 0000:06: resource 1 mem: [0xfb800000-0xfb8fffff]
[    0.379926] NET: Registered protocol family 2
[    0.379980] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.380127] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.380320] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.380412] TCP: Hash tables configured (established 131072 bind 65536)
[    0.380414] TCP reno registered
[    0.380452] NET: Registered protocol family 1
[    0.380463] pci 0000:00:02.0: Boot video device
[    0.428311] cpufreq-nforce2: No nForce2 chipset.
[    0.428327] Scanning for low memory corruption every 60 seconds
[    0.428391] audit: initializing netlink socket (disabled)
[    0.428399] type=2000 audit(1347114395.311:1): initialized
[    0.434722] highmem bounce pool size: 64 pages
[    0.434725] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.435604] VFS: Disk quotas dquot_6.5.2
[    0.435638] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.435967] fuse init (API version 7.13)
[    0.436016] msgmni has been set to 1650
[    0.436141] alg: No test for stdrng (krng)
[    0.436175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.436177] io scheduler noop registered
[    0.436178] io scheduler anticipatory registered
[    0.436180] io scheduler deadline registered
[    0.436204] io scheduler cfq registered (default)
[    0.436334]   alloc irq_desc for 26 on node -1
[    0.436336]   alloc kstat_irqs on node -1
[    0.436346] pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X
[    0.436358] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.436498]   alloc irq_desc for 27 on node -1
[    0.436500]   alloc kstat_irqs on node -1
[    0.436508] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.436518] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.436658]   alloc irq_desc for 28 on node -1
[    0.436659]   alloc kstat_irqs on node -1
[    0.436667] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[    0.436677] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.436815]   alloc irq_desc for 29 on node -1
[    0.436816]   alloc kstat_irqs on node -1
[    0.436824] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[    0.436835] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.436911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.436926] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.436988] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.436990] ACPI: Power Button [PWRB]
[    0.437019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.437020] ACPI: Power Button [PWRF]
[    0.437436] ACPI: SSDT bee0ee18 001D8 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.437622] ACPI: SSDT bee14d98 00054 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.438038] Monitor-Mwait will be used to enter C-3 state
[    0.438051] Monitor-Mwait will be used to enter C-3 state
[    0.438082] processor LNXCPU:00: registered as cooling_device0
[    0.440459] processor LNXCPU:01: registered as cooling_device1
[    0.443087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.443203] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.443316] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.443665] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.443799] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.444421] brd: module loaded
[    0.444685] loop: module loaded
[    0.444734] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.444788] ata_piix 0000:00:1f.2: version 2.13
[    0.444802] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.444807] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.444844] isapnp: Scanning for PnP cards...
[    0.519435] Freeing initrd memory: 12967k freed
[    0.612237] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.612313] scsi0 : ata_piix
[    0.612381] scsi1 : ata_piix
[    0.613367] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[    0.613373] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[    0.613396] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.613401] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.768164] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.768198] scsi2 : ata_piix
[    0.768229] scsi3 : ata_piix
[    0.769076] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    0.769080] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    0.769125] pata_acpi 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.769144] pata_acpi 0000:06:00.0: setting latency timer to 64
[    0.769156] pata_acpi 0000:06:00.0: PCI INT A disabled
[    0.769335] Fixed MDIO Bus: probed
[    0.769355] PPP generic driver version 2.4.2
[    0.769393] tun: Universal TUN/TAP device driver, 1.6
[    0.769395] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.769448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.769464] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.769477] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.769480] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.769498] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.769522] ehci_hcd 0000:00:1a.0: debug port 2
[    0.773398] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    0.773419] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbc06000
[    0.788145] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.788198] usb usb1: configuration #1 chosen from 1 choice
[    0.788216] hub 1-0:1.0: USB hub found
[    0.788221] hub 1-0:1.0: 2 ports detected
[    0.788258]   alloc irq_desc for 23 on node -1
[    0.788259]   alloc kstat_irqs on node -1
[    0.788263] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.788271] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.788274] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.788292] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.788314] ehci_hcd 0000:00:1d.0: debug port 2
[    0.792190] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    0.792201] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbc05000
[    0.800512] isapnp: No Plug & Play device found
[    0.808142] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.808235] usb usb2: configuration #1 chosen from 1 choice
[    0.808251] hub 2-0:1.0: USB hub found
[    0.808255] hub 2-0:1.0: 2 ports detected
[    0.808288] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.808296] uhci_hcd: USB Universal Host Controller Interface driver
[    0.808349] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.811051] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.811055] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.811123] mice: PS/2 mouse device common for all mice
[    0.811201] rtc_cmos 00:06: RTC can wake from S4
[    0.811224] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.811253] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.811315] device-mapper: uevent: version 1.0.3
[    0.811366] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.811405] device-mapper: multipath: version 1.1.0 loaded
[    0.811407] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.811469] EISA: Probing bus 0 at eisa.0
[    0.811519] EISA: Detected 0 cards.
[    0.811603] cpuidle: using governor ladder
[    0.811671] cpuidle: using governor menu
[    0.811901] TCP cubic registered
[    0.811992] NET: Registered protocol family 10
[    0.812229] lo: Disabled Privacy Extensions
[    0.812389] NET: Registered protocol family 17
[    0.812693] Using IPI No-Shortcut mode
[    0.812737] PM: Resume from disk failed.
[    0.812745] registered taskstats version 1
[    0.813275]   Magic number: 12:477:434
[    0.813334] rtc_cmos 00:06: setting system clock to 2012-09-08 14:26:36 UTC (1347114396)
[    0.813336] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.813337] EDD information not available.
[    0.839026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.099889] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.224753] usb 1-1: configuration #1 chosen from 1 choice
[    1.224862] hub 1-1:1.0: USB hub found
[    1.224966] hub 1-1:1.0: 4 ports detected
[    1.244417] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.268582] ata3.00: ATAPI: ATAPI   DVD A  DH16A1L, KH1A, max UDMA/33
[    1.300585] ata3.00: configured for UDMA/33
[    1.336360] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.468717] usb 2-1: configuration #1 chosen from 1 choice
[    1.468931] hub 2-1:1.0: USB hub found
[    1.469017] hub 2-1:1.0: 6 ports detected
[    1.740309] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[    1.796206] ata4: failed to resume link (SControl 0)
[    1.807434] ata4: SATA link down (SStatus 4 SControl 0)
[    1.834597] usb 2-1.2: configuration #1 chosen from 1 choice
[    1.952162] ata1.01: failed to resume link (SControl 0)
[    1.952249] ata2.01: failed to resume link (SControl 0)
[    2.108193] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.108210] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.108417] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.108432] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.116610] ata2.00: ATA-7: Hitachi HDT725050VLA360, V56OA7BA, max UDMA/133
[    2.116613] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.132352] ata2.00: configured for UDMA/133
[    2.161273] ata1.00: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[    2.161278] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.227901] ata1.00: configured for UDMA/133
[    2.228013] scsi 0:0:0:0: Direct-Access     ATA      ST3160812AS      3.AA PQ: 0 ANSI: 5
[    2.228088] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.228162] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDT72505 V56O PQ: 0 ANSI: 5
[    2.228218] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.228335] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.228363] sd 1:0:0:0: [sdb] Write Protect is off
[    2.228364] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.228377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.228423] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.228446] sd 0:0:0:0: [sda] Write Protect is off
[    2.228448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.228472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.228523]  sdb:
[    2.228633]  sda:
[    2.229551] scsi 2:0:0:0: CD-ROM            ATAPI    DVD A  DH16A1L   KH1A PQ: 0 ANSI: 5
[    2.235237] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.235240] Uniform CD-ROM driver Revision: 3.20
[    2.235304] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.235330] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.241779] 
[    2.241908] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.267577] 
[    2.267701] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.267709] Freeing unused kernel memory: 660k freed
[    2.267887] Write protecting the kernel text: 4680k
[    2.267936] Write protecting the kernel read-only data: 1844k
[    2.281287] udev: starting version 151
[    2.318920] vga16fb: initializing
[    2.318922] vga16fb: mapped to 0xc00a0000
[    2.318957] fb0: VGA16 VGA frame buffer device
[    2.362452] Initializing USB Mass Storage driver...
[    2.365354] scsi4 : SCSI emulation for USB Mass Storage devices
[    2.365450] usbcore: registered new interface driver usb-storage
[    2.365451] USB Mass Storage support registered.
[    2.365648] usb-storage: device found at 3
[    2.365649] usb-storage: waiting for device to settle before scanning
[    2.437645] Console: switching to colour frame buffer device 80x30
[    2.614892] xor: automatically using best checksumming function: pIII_sse
[    2.631927]    pIII_sse  : 12121.000 MB/sec
[    2.631929] xor: using function: pIII_sse (12121.000 MB/sec)
[    2.633685] device-mapper: dm-raid45: initialized v0.2594b
[    7.362863] usb-storage: device scan complete
[    7.363579] scsi 4:0:0:0: Direct-Access              USB Flash Memory 1.00 PQ: 0 ANSI: 2
[    7.364283] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    7.364961] sd 4:0:0:0: [sdc] 3953664 512-byte logical blocks: (2.02 GB/1.88 GiB)
[    7.365455] sd 4:0:0:0: [sdc] Write Protect is off
[    7.365458] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[    7.365461] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    7.367453] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    7.367456]  sdc: sdc1
[    7.370091] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    7.370093] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    8.188112] aufs 2-standalone.tree-20091207
[    8.197600] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   18.796675] udev: starting version 151
[   19.051286] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   19.051304] xhci_hcd 0000:05:00.0: setting latency timer to 64
[   19.051308] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   19.051351] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   19.058864] xhci_hcd 0000:05:00.0: irq 19, io mem 0xfb900000
[   19.058943] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[   19.059085] usb usb3: configuration #1 chosen from 1 choice
[   19.059088] xHCI xhci_add_endpoint called for root hub
[   19.059089] xHCI xhci_check_bandwidth called for root hub
[   19.059163] hub 3-0:1.0: USB hub found
[   19.059168] hub 3-0:1.0: 4 ports detected
[   19.175713] parport_pc 00:03: reported by Plug and Play ACPI
[   19.175779] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   19.218953] cfg80211: Calling CRDA to update world regulatory domain
[   19.258559] ppdev: user-space parallel port driver
[   19.312048] psmouse serio1: ID: 10 00 64
[   19.349392] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.548731] cfg80211: World regulatory domain updated:
[   19.548733]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.548736]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.548737]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.548739]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.548741]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.548742]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.653748] ath: EEPROM regdomain: 0x809c
[   19.653750] ath: EEPROM indicates we should expect a country code
[   19.653751] ath: doing EEPROM country->regdmn map search
[   19.653753] ath: country maps to regdmn code: 0x52
[   19.653754] ath: Country alpha2 being used: CN
[   19.653755] ath: Regpair used: 0x52
[   19.750942] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   19.751328] Registered led device: ath9k-phy0::radio
[   19.751339] Registered led device: ath9k-phy0::assoc
[   19.751348] Registered led device: ath9k-phy0::tx
[   19.751358] Registered led device: ath9k-phy0::rx
[   19.751372] phy0: Atheros AR9287 MAC/BB Rev:2 AR5133 RF Rev:ff: mem=0xf8380000, irq=17
[   19.752128] cfg80211: Calling CRDA for country: CN
[   19.755698] cfg80211: Regulatory domain changed to country: CN
[   19.755700]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.755702]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.755704]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   19.854507] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   19.854630] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.936400]   alloc irq_desc for 22 on node -1
[   19.936402]   alloc kstat_irqs on node -1
[   19.936407] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   19.936439] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.450520] lp0: using parport0 (interrupt-driven).
[   20.651757] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   69.737767] wlan0: direct probe to AP 08:76:ff:9a:85:b6 (try 1)
[   69.737780] wlan0: deauthenticating from 08:76:ff:9a:85:b6 by local choice (reason=3)
[   69.737852] wlan0: direct probe to AP 08:76:ff:9a:85:b6 (try 1)
[   69.744439] wlan0: direct probe responded
[   69.744442] wlan0: authenticate with AP 08:76:ff:9a:85:b6 (try 1)
[   69.943240] wlan0: authenticate with AP 08:76:ff:9a:85:b6 (try 2)
[   70.143167] wlan0: authenticate with AP 08:76:ff:9a:85:b6 (try 3)
[   70.183977] wlan0: authenticated
[   70.183992] wlan0: associate with AP 08:76:ff:9a:85:b6 (try 1)
[   70.194855] wlan0: RX AssocResp from 08:76:ff:9a:85:b6 (capab=0x411 status=0 aid=2)
[   70.194857] wlan0: associated
[   70.209253] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   70.441465] padlock: VIA PadLock not detected.
[   80.508972] wlan0: no IPv6 routers present

Dernière modification par arnaud.saussereau (Le 08/09/2012, à 10:08)

Hors ligne

#49 Le 08/09/2012, à 10:11

michel_04

Re : Aide pour une bonne installation optimisée

Bonjour,

Édite ton message et remplace :
Au début du texte :
[balise BBCode] par  ça sans les espaces [ code ]

A la fin du texte :
[/balise BBCode] par  ça sans les espaces [ /code ]


A+

Dernière modification par michel_04 (Le 08/09/2012, à 10:13)

En ligne

#50 Le 08/09/2012, à 10:17

arnaud.saussereau

Re : Aide pour une bonne installation optimisée

michel merci mais j ai reussi juste avant de voir ton message.
desoler pour la ponctuation mais mon clavier est en qwerty en tout est en anglais et j arrive pas a changer ca

Hors ligne

Haut de page ↑