Pages : 1
#1 Le 11/04/2014, à 18:51
- Wizix
Installation d'ElementaryOS
Bonjour à tous !
Alors je sais, elementary OS c'est pas ubuntu, mais c'est exactement la même installation, donc je viens demander votre aide !
Alors, je vous explique mon problème : j'ai 2 disques dur, un HDD et un SSD. Le HDD est le "sda" et le SSD le "sdb". L'installation par défaut sur le HDD se déroule sans aucun problème, mais je perd l'avantage du SSD. Donc je profite de mon SSD pour y mettre eOS.
Le problème ? C'est que le grub ne veut pas s'installer dans /target/ ou une conn*rie comme ça. Donc comment configurer le BIOS et mes partition de mon sdb pour que tout ce passe sans problème ? Merci beaucoup de votre aide !
Nombre de PC convertis : 6
Hors ligne
#2 Le 11/04/2014, à 18:56
- spinoziste
Hors ligne
#3 Le 11/04/2014, à 23:31
- Wizix
Re : Installation d'ElementaryOS
Nan mais c'est exactement la même installation qu'ubuntu, pas la peine de me créer un compte et tout.. Je sais que vous pouvez m'aider sur ce forum ! Voici ce que me dit le boot-repair "The boot of your PC is in EFI mode, but no EFI partition was detected. You may want to retry after creating a EFI partition (FAT32, 100MB~250MB, start of the disk, boot flag).
Do you want to continue?" et voici mon rapport : http://paste.ubuntu.com/7236820/
Aidez moi juste à créer les partitions sur mon sdb ! Merci !
EDIT : J'essaye d'installer eOS, et voilà à quoi j'ai le droit : "Le paquet grub-efi n'a pas pu être installé dans /target/. En l'absence du programme de démarrage GRUB, le système installé ne pourra pas démarrer." pourtant toutes les options sont par défaut ! Je ne vois absolument pas où ça cloche..
EDIT2 : Quand j'ouvre gParted PENDANT l'installation pour voir l'état de mes partitions, je remarque mon / est au point de montage /target ! Je sais pas si c'est totalement normal et ça m'étonnerait... Et après l'installation, mon / est au point de montage /mnt/boot-sav/sdb2
Dernière modification par Wizix (Le 12/04/2014, à 07:46)
Nombre de PC convertis : 6
Hors ligne
#4 Le 12/04/2014, à 22:14
- Wizix
Re : Installation d'ElementaryOS
Help s'il vous plait :'( !
Nombre de PC convertis : 6
Hors ligne
#5 Le 13/04/2014, à 06:01
- malbo
Re : Installation d'ElementaryOS
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: elementary OS Luna
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb4: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20130620
Boot sector info: Syslinux looks at sector 3347964 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 24.0 GB, 24015495168 bytes
255 heads, 63 sectors/track, 2919 cylinders, total 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 46,905,263 46,905,263 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 194,559 192,512 EFI System partition
/dev/sdb2 194,560 38,545,407 38,350,848 Data partition (Windows/Linux)
/dev/sdb3 38,750,208 46,903,295 8,153,088 Swap partition (Linux)
/dev/sdb4 38,545,408 38,750,207 204,800 BIOS Boot partition
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 4009 MB, 4009754624 bytes
255 heads, 63 sectors/track, 487 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2 7,831,551 7,831,550 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sdb1 BF22-0F89 vfat
/dev/sdb2 d494de24-24d0-497f-9eea-9e2c852afe93 ext4
/dev/sdb3 1e2dc636-2512-4e28-9d18-8199cfb50195 swap
/dev/sdc1 7A07-1A16 vfat LINUX
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
true
}
insmod part_gpt
insmod ext2
set root='(hd1,gpt2)'
search --no-floppy --fs-uuid --set=root d494de24-24d0-497f-9eea-9e2c852afe93
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'elementary OS, avec Linux 3.2.0-51-generic' --class elementary --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd1,gpt2)'
search --no-floppy --fs-uuid --set=root d494de24-24d0-497f-9eea-9e2c852afe93
linux /boot/vmlinuz-3.2.0-51-generic root=UUID=d494de24-24d0-497f-9eea-9e2c852afe93 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-51-generic
}
menuentry 'elementary OS, avec Linux 3.2.0-51-generic (mode de dépannage)' --class elementary --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd1,gpt2)'
search --no-floppy --fs-uuid --set=root d494de24-24d0-497f-9eea-9e2c852afe93
echo 'Chargement de Linux 3.2.0-51-generic ...'
linux /boot/vmlinuz-3.2.0-51-generic root=UUID=d494de24-24d0-497f-9eea-9e2c852afe93 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-51-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb2 during installation
UUID=d494de24-24d0-497f-9eea-9e2c852afe93 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=BF22-0F89 /boot/efi vfat defaults 0 1
# swap was on /dev/sdb3 during installation
UUID=1e2dc636-2512-4e28-9d18-8199cfb50195 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
12.225990295 = 13.127557120 boot/grub/grub.cfg 1
12.225986481 = 13.127553024 boot/vmlinuz-3.2.0-51-generic 1
12.225986481 = 13.127553024 vmlinuz 1
4.604049683 = 4.943560704 boot/initrd.img-3.2.0-51-generic 2
4.604049683 = 4.943560704 initrd.img 2
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try elementary OS without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install elementary OS" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdc1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try elementary OS without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper quiet splash --
label ubnentry2
menu label ^Install elementary OS
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try elementary OS without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry7
menu label Install elementary OS
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry8
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-04-11__23h29 ===================
boot-repair version : 3.199~ppa40~precise
boot-sav version : 3.199~ppa40~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.199~ppa40~precise
boot-repair is executed in live-session (elementary OS Luna, luna, elementary OS, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sdb2:elementary OS Luna (0.2):elementaryOS:linux
=================== blkid:
/dev/sdb2: UUID="d494de24-24d0-497f-9eea-9e2c852afe93" TYPE="ext4"
/dev/sdb1: UUID="BF22-0F89" TYPE="vfat"
/dev/sdb3: UUID="1e2dc636-2512-4e28-9d18-8199cfb50195" TYPE="swap"
/dev/loop0: TYPE="squashfs"
/dev/sdc1: LABEL="LINUX" UUID="7A07-1A16" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sdb2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 10 2013 grub.d
total 56
-rwxr-xr-x 1 root root 6743 Jul 20 2013 00_header
-rwxr-xr-x 1 root root 5522 Jul 20 2013 05_debian_theme
-rwxr-xr-x 1 root root 7780 Jul 20 2013 10_linux
-rwxr-xr-x 1 root root 6335 Jul 20 2013 20_linux_xen
-rwxr-xr-x 1 root root 7603 Jul 20 2013 30_os-prober
-rwxr-xr-x 1 root root 1388 Jul 20 2013 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jul 20 2013 40_custom
-rwxr-xr-x 1 root root 95 Jul 20 2013 41_custom
-rw-r--r-- 1 root root 483 Jul 20 2013 README
/boot/efi detected in the fstab of sdb2: UUID=BF22-0F89 (sdb1)
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sdb2 : sdb, not-sepboot, no-grubenv nogrub, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb2.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb : GPT, BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS54757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: ATA SanDisk SSD U100 (scsi)
Disk /dev/sdb: 24.0GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 99.6MB 98.6MB fat32 boot
2 99.6MB 19.7GB 19.6GB ext4
4 19.7GB 19.8GB 105MB bios_grub
3 19.8GB 24.0GB 4174MB linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdc: 4010MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1024B 4010MB 4010MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA Hitachi HTS54757;
BYT;
/dev/sdb:24.0GB:scsi:512:512:gpt:ATA SanDisk SSD U100;
1:1049kB:99.6MB:98.6MB:fat32::boot;
2:99.6MB:19.7GB:19.6GB:ext4::;
4:19.7GB:19.8GB:105MB:::bios_grub;
3:19.8GB:24.0GB:4174MB:linux-swap(v1)::;
BYT;
/dev/sdc:4010MB:scsi:512:512:msdos: USB DISK 2.0;
1:1024B:4010MB:4010MB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/elementary/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=elementary)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sdb1 sdb2 sdb3 sdb4 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 v4l vga_arbiter video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 64 6f 73 66 73 00 00 02 01 20 00 |.X.mkdosfs.... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 f0 02 00 c9 05 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 29 89 0f 22 bf 20 20 20 20 20 20 20 20 20 |..)..". |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.9G 276M 1.7G 15% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 769M 864K 768M 1% /run
/dev/sdc1 vfat 3.8G 1.6G 2.2G 43% /cdrom
/dev/loop0 squashfs 652M 652M 0 100% /rofs
tmpfs tmpfs 1.9G 52K 1.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.9G 224K 1.9G 1% /run/shm
/dev/sdb2 ext4 19G 2.4G 15G 14% /mnt/boot-sav/sdb2
/dev/sdb1 vfat 93M 512 93M 1% /mnt/boot-sav/sdb1
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 1465149167 732574583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 24.0 GB, 24015495168 bytes
255 heads, 63 sectors/track, 2919 cylinders, total 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 46905263 23452631+ ee GPT
Disk /dev/sdc: 4009 MB, 4009754624 bytes
255 heads, 63 sectors/track, 487 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdc1 * 2 7831551 3915775 b W95 FAT32
=================== Advice displayed in case of recommended repair
The boot of your PC is in EFI mode, but no EFI partition was detected. You may want to retry after creating a EFI partition (FAT32, 100MB~250MB, start of the disk, boot flag).
Do you want to continue?
=================== Default settings
Recommended-Repair
This setting would purge (in order to fix executable) and reinstall the grub2 of sdb2 into the MBR of sdb.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
No change has been performed on your computer.
paste2.org ko (), using paste.ubuntuPeut-être que ça inspirera quelqu'un.
J'aurais bien tenté de t'aider mais je dois m'absenter une semaine.
EDIT : je n'ai pas le temps d'approfondir parce que je dois partir mais il semble que l'installation en mode EFI ne soit pas possible : http://forum.ubuntu-fr.org/viewtopic.ph … #p16179181
Dernière modification par malbo (Le 13/04/2014, à 06:06)
Hors ligne
Pages : 1