#1 Le 31/08/2014, à 12:37
- parang
impossible d'accéder à windows après installation d'ubuntu[Resolu]
Bonjour,
je vien d'installer ubuntu sur mon pc. je voulais l'installer en dual boot mais il n'y avait qu'une seule partition j'en ai donc crée une sous windows qui n'a pas étée détectée. j'en ai donc crée une dans l'install d'ubuntu et sa a marché. sauf que depuis impossible d'accéder à windows ou à mon disque dur. j'aimerais vraiment, a defaut de pouvoir récupérer windows, au moins pouvoir accéder à mes données. j'ajoute que lors de la création de ma partition pour ubuntu celui-ci ma conseillé de créer une partition de partage ou je ne sait quoi chose que je n'ai pas faite.
je serait éternellement reconnaissant à celui qui me trouvera LA solution
Merci d'avance,
Antoine
Dernière modification par parang (Le 01/09/2014, à 18:41)
Hors ligne
#2 Le 31/08/2014, à 13:00
- nam1962
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Déjà, tu dois pouvoir accéder à tes données si tu n'as pas écrasé ton windows.
Pour le moment n'écris RIEN sur ton ordi.
Donne le retour de
sudo fdisk -l
[ Modéré ]
Hors ligne
#3 Le 31/08/2014, à 13:47
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
voila ce qu'affiche le terminal:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x7f30e480
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Hors ligne
#4 Le 31/08/2014, à 13:53
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
et voilà disk:
[url]http://[Merci de relire les règles]/llqcxl5[/url]
Dernière modification par parang (Le 31/08/2014, à 13:55)
Hors ligne
#5 Le 31/08/2014, à 14:00
- alaixi
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Je ne vais pas faire l'oiseau de mauvaise augure mais j'ai comme l'impression que tu as du écraser un morceau de windows quelque part, ce qu'il faut avoir à l'esprit c'est que quand linux dit qu'il reste 5G0 sur un disque il en reste 5g0 en un morceau alors que quand windows te dit la même chose il peut en rester 1 +2 + 2 dans différentes parties de disque dur. Si on se base sur la simple donnée de windows pour installer forcément qu'on risque d'installer une partition là où justement il n'y a pas de place.... Et alors on flingue son windows... J'ai fait cette erreur lors de ma première installation.
Le mieux est parfois l'ennemi du bien.
Hors ligne
#6 Le 31/08/2014, à 14:19
- malbo
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
C'est quoi le modèle de ton PC et son fabricant ?
Dernière modification par malbo (Le 31/08/2014, à 14:19)
Hors ligne
#7 Le 31/08/2014, à 16:17
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
on flingue son windows
ça a la limite je m'en fou mais je voudrais juste récupérer et accéder à mes données.
C'est quoi le modèle de ton PC et son fabricant ?
mon PC est un HP-Pavilion-Sleekbook-15
Hors ligne
#8 Le 31/08/2014, à 16:46
- malbo
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Peux-tu démarrer ton ordi sur un liveDVD ou une liveUSB de Ubuntu 14.04.1 (j'évite de te proposer de démarrer sur le Ubuntu du disque dur parce que ça risque de piétiner des données qui peuvent s'y trouver) en session live (choix Essayer Ubuntu) et faire un Boot-Info en suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Je pourrai te confirmer ou pas le mauvais pressentiment de alaixi (son post #5)
Dernière modification par malbo (Le 31/08/2014, à 16:48)
Hors ligne
#9 Le 31/08/2014, à 17:27
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
voila le lien
paste.ubuntu.com/8197829/
dsl je galere en qwerty
Hors ligne
#10 Le 31/08/2014, à 18:21
- nam1962
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Si tu as un souci de clavier, regarde la section 2.3 là : http://doc.ubuntu-fr.org/tutoriel/configurer_le_clavier
[ Modéré ]
Hors ligne
#11 Le 31/08/2014, à 19:15
- malbo
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector
1945409656 of the same hard drive for core.img. core.img is at this
location and looks in partition 112 for .
=> Syslinux MBR (3.00-3.35) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05
Boot sector info: Syslinux looks at sector 32800 of /dev/sdb1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 1,939,853,312 1,953,523,711 13,670,400 Data partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 32.0 GB, 32015679488 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 62,530,623 62,530,561 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 f3dccfda-fef4-4fce-be25-80f91b9a5a4f ext4
/dev/sdb1 8A70-5FDB vfat UBUNTU 1404
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 f3dccfda-fef4-4fce-be25-80f91b9a5a4f
else
search --no-floppy --fs-uuid --set=root f3dccfda-fef4-4fce-be25-80f91b9a5a4f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f3dccfda-fef4-4fce-be25-80f91b9a5a4f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 f3dccfda-fef4-4fce-be25-80f91b9a5a4f
else
search --no-floppy --fs-uuid --set=root f3dccfda-fef4-4fce-be25-80f91b9a5a4f
fi
linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=f3dccfda-fef4-4fce-be25-80f91b9a5a4f ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-24-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-f3dccfda-fef4-4fce-be25-80f91b9a5a4f' {
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-f3dccfda-fef4-4fce-be25-80f91b9a5a4f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 f3dccfda-fef4-4fce-be25-80f91b9a5a4f
else
search --no-floppy --fs-uuid --set=root f3dccfda-fef4-4fce-be25-80f91b9a5a4f
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=f3dccfda-fef4-4fce-be25-80f91b9a5a4f ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-f3dccfda-fef4-4fce-be25-80f91b9a5a4f' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 f3dccfda-fef4-4fce-be25-80f91b9a5a4f
else
search --no-floppy --fs-uuid --set=root f3dccfda-fef4-4fce-be25-80f91b9a5a4f
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=f3dccfda-fef4-4fce-be25-80f91b9a5a4f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=f3dccfda-fef4-4fce-be25-80f91b9a5a4f / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
cat: /tmp/BootInfo-WtKCMvuq/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-WtKCMvuq/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-WtKCMvuq/Tmp_Log: No such file or directory
File descriptor 9 (/proc/5003/mounts) leaked on lvscan invocation. Parent PID 11595: bash
File descriptor 63 (pipe:[50389]) leaked on lvscan invocation. Parent PID 11595: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-31__15h23 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda1:Ubuntu 14.04 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="f3dccfda-fef4-4fce-be25-80f91b9a5a4f" TYPE="ext4"
/dev/sdb1: LABEL="UBUNTU 1404" UUID="8A70-5FDB" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 17 01:26 grub.d
total 76
-rwxr-xr-x 1 root root 9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root 483 Apr 11 10:51 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS54101 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 993GB 1000GB 6999MB ext4
Model: SanDisk Cruzer Slice (scsi)
Disk /dev/sdb: 32.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 32.0GB 32.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA Hitachi HTS54101;
1:993GB:1000GB:6999MB:ext4::;
BYT;
/dev/sdb:32.0GB:scsi:512:512:msdos:SanDisk Cruzer Slice;
1:32.3kB:32.0GB:32.0GB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hidraw0 hidraw1 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.9G 122M 2.8G 5% /
udev devtmpfs 2.9G 12K 2.9G 1% /dev
tmpfs tmpfs 587M 1.1M 586M 1% /run
/dev/sdb1 vfat 30G 14G 17G 45% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.9G 1.2M 2.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.9G 80K 2.9G 1% /run/shm
none tmpfs 100M 88K 100M 1% /run/user
/dev/sda1 ext4 6.3G 3.5G 2.6G 58% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x7f30e480
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 32.0 GB, 32015679488 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x003d1130
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 62530623 31265280+ c W95 FAT32 (LBA)
(debug) reinstall grub2 place-in-MBR no-BIOS_boot (sda1)
=================== Repair blockers
GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again.
=================== Advice displayed in case of recommended repair
The boot of your PC is in EFI mode, but no EFI partition was detected. You may want to retry after creating a EFI partition (FAT32, 100MB~250MB, start of the disk, boot flag).
Do you want to continue?
=================== Default settings
Recommended-Repair
This setting would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
No change has been performed on your computer.
Je pense que rien n'est désespéré pour que tu récupères tes données (j'ai dit les données, je n'ai pas dit récupérer Windows). Il faut que tu t'adresses à un spécialiste de la récupération de données. En attendant, ne démarre plus (et n'essaie même pas de le faire) sur ton Ubuntu installé : ne démarre que sur ta liveUSB de Ubuntu 14.04
Dernière modification par malbo (Le 31/08/2014, à 19:17)
Hors ligne
#12 Le 31/08/2014, à 20:58
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Merci beaucoup de votre aide même si j'avais espéré résoudre le problème moi même enfin bon le plus important c'est de les récupérer, ces données:D
Hors ligne
#13 Le 31/08/2014, à 21:47
- nam1962
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Je ne suis pas du tout expert en récup de données, je sais juste l'existence des logiciels magiques pour.
Mon seul conseil en attendant l'expert : n'écris rien de nouveau !!
[ Modéré ]
Hors ligne
#14 Le 31/08/2014, à 22:37
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
que dites vous de testdisk?
sur ce topic ci ou il a le même problème il a réussi a récupérer sa partition perdue
Hors ligne
#15 Le 31/08/2014, à 22:41
- alaixi
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Ca a eu l'air de lui convenir mais je ne connais pas perso. Je dirais pourquoi pas.
Le mieux est parfois l'ennemi du bien.
Hors ligne
#16 Le 31/08/2014, à 22:45
- cqfd93
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
que dites vous de testdisk?
sur ce topic ci ou il a le même problème il a réussi a récupérer sa partition perdue
Oui tu peux essayer mais n'oublie pas : uniquement en live DVD/USB et ne rien écrire sue le disque dur interne !
Ceci dit, son cas était plus favorable que le tien : il avait ses données sur une partition séparée, donc attends-toi à y perdre des plumes.
− cqfd93 −
Hors ligne
#17 Le 01/09/2014, à 18:44
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
j'ai pu recuperer mes donnees merci infiniment a vous tous qui m'avez aidé
Dernière modification par parang (Le 01/09/2014, à 18:44)
Hors ligne
#18 Le 01/09/2014, à 19:04
- nam1962
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
Peux tu nous dire ce que tu as fait ? (ca aidera les suivants )
[ Modéré ]
Hors ligne
#19 Le 01/09/2014, à 20:38
- parang
Re : impossible d'accéder à windows après installation d'ubuntu[Resolu]
j'ai utilisé test disk et ai restauré la partition perdue
Hors ligne