#1 Le 10/10/2014, à 14:05
- Bouubouu
Problème grub/bios suite installation windows 7
Bonjour à tous,
Suite à la réinstallation de windows sur un dual boot avec ubuntu 14.04 plus de grub au démarrage,
J'ai donc créé un liveUbuntu et utilisé boot repair mais toujours rien,
Dans le choix de boot au niveau du bios j'ai l'impression de ne pas avoir mon DD de visibe, les choix sont :
-Notebook Harddrive
-Notebook ethernet
-USB
Et boot-repair me donne : http://paste.ubuntu.com/8531640/
Une idée sur le problème rencontré ?
Voir le debut de la resolution dans cette discussion : http://forum.ubuntu-fr.org/viewtopic.ph … #p18249391
Cordialement,
Elie
Hors ligne
#2 Le 10/10/2014, à 14:14
- malbo
Re : Problème grub/bios suite installation windows 7
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6
and looks at sector 1421922400 of the same hard drive
for core.img. core.img is at this location and looks
in partition 112 for .
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 6141640 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 616,447 614,400 7 NTFS / exFAT / HPFS
/dev/sda2 616,448 419,473,407 418,856,960 c W95 FAT32 (LBA)
/dev/sda3 419,475,454 1,465,147,391 1,045,671,938 5 Extended
/dev/sda5 419,475,456 1,383,229,439 963,753,984 7 NTFS / exFAT / HPFS
/dev/sda6 * 1,383,231,488 1,456,956,097 73,724,610 83 Linux
/dev/sda7 1,456,957,440 1,465,147,391 8,189,952 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 15,635,593 15,635,532 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 dd5de812-7cf0-e142-a5bb-f88ef5f4273f ext2
/dev/mmcblk0p1 3231-3636 vfat
/dev/sda1 D8A4FB1BA4FAFAB8 ntfs SYSTEM
/dev/sda2 82CF-1573 vfat
/dev/sda5 3B14C7220B5B4D11 ntfs Data
/dev/sda6 01ae64f0-f8e1-4dec-a191-21776d14b92b ext4
/dev/sda7 513db588-5ec0-4c75-bd82-44c1794e78f2 swap
/dev/sdb1 C6E7-7CF2 vfat MULTISYSTEM
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/mmcblk0p1 /media/ubuntu-gnome/3231-3636 vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 45,51,53; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-37-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
menuentry 'Ubuntu, with Linux 3.13.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-advanced-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-37-generic ...'
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-recovery-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-37-generic ...'
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-36-generic ...'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-36-generic ...'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-01ae64f0-f8e1-4dec-a191-21776d14b92b' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 01ae64f0-f8e1-4dec-a191-21776d14b92b
else
search --no-floppy --fs-uuid --set=root 01ae64f0-f8e1-4dec-a191-21776d14b92b
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-D8A4FB1BA4FAFAB8' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 D8A4FB1BA4FAFAB8
else
search --no-floppy --fs-uuid --set=root D8A4FB1BA4FAFAB8
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/40_multisystem ###
# Ajout de MultiSystem
### MULTISYSTEM MENU
menuentry "PLoP Boot Manager" {
linux16 /boot/plpbt
}
menuentry "Smart Boot Manager" {
search --set -f /boot/sbootmgr.dsk
linux16 /boot/memdisk
initrd16 /boot/sbootmgr.dsk
}
### FIN MULTISYSTEM MENU
### END /etc/grub.d/40_multisystem ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=01ae64f0-f8e1-4dec-a191-21776d14b92b / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=513db588-5ec0-4c75-bd82-44c1794e78f2 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu GNOME without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu-gnome.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu GNOME" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu-gnome.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu-gnome.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-oBNQEnkv/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-oBNQEnkv/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-oBNQEnkv/Tmp_Log: No such file or directory
File descriptor 10 (/proc/18495/mounts) leaked on lvscan invocation. Parent PID 29384: bash
File descriptor 63 (pipe:[1270437]) leaked on lvscan invocation. Parent PID 29384: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-10-10__08h31 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/cli.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda6:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="dd5de812-7cf0-e142-a5bb-f88ef5f4273f" TYPE="ext2"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="3231-3636" TYPE="vfat"
/dev/sda1: LABEL="SYSTEM" UUID="D8A4FB1BA4FAFAB8" TYPE="ntfs"
/dev/sda2: UUID="82CF-1573" TYPE="vfat"
/dev/sda5: LABEL="Data" UUID="3B14C7220B5B4D11" TYPE="ntfs"
/dev/sda6: UUID="01ae64f0-f8e1-4dec-a191-21776d14b92b" TYPE="ext4"
/dev/sda7: UUID="513db588-5ec0-4c75-bd82-44c1794e78f2" TYPE="swap"
/dev/sdb1: LABEL="MULTISYSTEM" UUID="C6E7-7CF2" TYPE="vfat"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 9 14:00 grub.d
total 80
-rwxr-xr-x 1 root root 9424 mai 15 19:02 00_header
-rwxr-xr-x 1 root root 6058 mai 8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 19:02 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 19:02 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 19:02 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 19:02 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 19:02 40_custom
-rwxr-xr-x 1 root root 278 oct. 9 14:00 40_multisystem
-rwxr-xr-x 1 root root 216 mai 15 19:02 41_custom
-rw-r--r-- 1 root root 483 mai 15 19:02 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
mmcblk0p1 : mmcblk0, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /media/ubuntu-gnome/3231-3636.
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
mmcblk0 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 135 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 316MB 315MB primary ntfs
2 316MB 215GB 214GB primary fat32 lba
3 215GB 750GB 535GB extended
5 215GB 708GB 493GB logical ntfs
6 708GB 746GB 37.7GB logical ext4 boot
7 746GB 750GB 4193MB logical linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 8011MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 8005MB 8005MB primary fat32 boot
Model: SD SD02G (sd/mmc)
Disk /dev/mmcblk0: 1978MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 69.1kB 1976MB 1976MB primary fat16
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA Hitachi HTS72757;
1:1049kB:316MB:315MB:ntfs::;
2:316MB:215GB:214GB:fat32::lba;
3:215GB:750GB:535GB:::;
5:215GB:708GB:493GB:ntfs::;
6:708GB:746GB:37.7GB:ext4::boot;
7:746GB:750GB:4193MB:linux-swap(v1)::;
BYT;
/dev/sdb:8011MB:scsi:512:512:msdos: USB DISK 2.0;
1:31.7kB:8005MB:8005MB:fat32::boot;
BYT;
/dev/mmcblk0:1978MB:sd/mmc:512:512:msdos:SD SD02G;
1:69.1kB:1976MB:1976MB:fat16::;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu-gnome)
/dev/mmcblk0p1 on /media/ubuntu-gnome/3231-3636 type vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
=================== ls:
/sys/block/mmcblk0 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight mmcblk0p1 power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse fw0 hpet input kmsg log lp0 mapper mcelog mei mem mmcblk0 mmcblk0p1 net network_latency network_throughput null parport0 port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout tpm0 uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 watchdog watchdog0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/mmcblk0p1
00000000 eb 00 90 4d 53 44 4f 53 35 2e 30 00 02 40 01 00 |...MSDOS5.0..@..|
00000010 02 00 02 00 00 f8 ec 00 3f 00 40 00 87 00 00 00 |........?.@.....|
00000020 39 e0 3a 00 80 01 29 36 36 31 32 4e 4f 20 4e 41 |9.:...)6612NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 36 20 20 20 00 00 |ME FAT16 ..|
00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 5f 09 00 00 00 00 00 |........._......|
00000030 00 64 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |.d..............|
00000040 f6 00 00 00 01 00 00 00 b8 fa fa a4 1b fb a4 d8 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 40 20 00 |.X.mkfs.fat..@ .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 68 09 00 |........?....h..|
00000020 00 40 f7 18 ae c7 00 00 00 00 00 00 02 00 00 00 |.@..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 73 15 cf 82 20 20 20 20 20 20 20 20 20 |..)s... |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b0 00 19 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff b7 71 39 00 00 00 00 |..........q9....|
00000030 04 00 00 00 00 00 00 00 7f 1b 97 03 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 11 4d 5b 0b 22 c7 14 3b |.........M[."..;|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.0G 824M 1.1G 44% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 792M 1.3M 791M 1% /run
/dev/sdb1 vfat 7.5G 3.1G 4.4G 42% /cdrom
/dev/loop0 squashfs 894M 894M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 8.0K 3.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.9G 13M 3.9G 1% /run/shm
none tmpfs 100M 24K 100M 1% /run/user
/dev/mmcblk0p1 vfat 1.9G 1.1G 793M 58% /media/ubuntu-gnome/3231-3636
/dev/sda1 fuseblk 300M 36M 265M 12% /mnt/boot-sav/sda1
/dev/sda2 vfat 200G 32K 200G 1% /mnt/boot-sav/sda2
/dev/sda5 fuseblk 460G 135G 326G 30% /mnt/boot-sav/sda5
/dev/sda6 ext4 35G 12G 22G 34% /mnt/boot-sav/sda6
=================== fdisk -l:
Disk /dev/mmcblk0: 1977 MB, 1977614336 bytes
64 heads, 63 sectors/track, 957 cylinders, total 3862528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 135 3858623 1929244+ 6 FAT16
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xf870201b
Device Boot Start End Blocks Id System
/dev/sda1 2048 616447 307200 7 HPFS/NTFS/exFAT
/dev/sda2 616448 419473407 209428480 c W95 FAT32 (LBA)
/dev/sda3 419475454 1465147391 522835969 5 Extended
Partition 3 does not start on physical sector boundary.
/dev/sda5 419475456 1383229439 481876992 7 HPFS/NTFS/exFAT
/dev/sda6 * 1383231488 1456956097 36862305 83 Linux
/dev/sda7 1456957440 1465147391 4094976 82 Linux swap / Solaris
Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e099e
Device Boot Start End Blocks Id System
/dev/sdb1 * 62 15635593 7817766 b W95 FAT32
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (750GB) !
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda6 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sda6.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Essaie la méthode "Via le disque SuperGrub" de la doc 3. Méthodes en lignes de commande
C'est "Super Grub2 Disk (Floppy, CD & USB in one) 2.00s2 (ISO)[Mirror #1]" qui est à télécharger ici et à graver (fonction "graver une image") sur un CD ou un CD ré-inscriptible. Cet outil est capable de démarrer directement sur le fichier /boot/grub/grub.cfg de la partition sda6. En somme, il passe par dessus la tête du chargeur d'amorçage qui est dans le MBR. Si ton installation Ubuntu est intacte comme le laisse penser tes explications mais que c'est seulement le démarrage qui a été cassé, Super Grub2 Disk doit faire des merveilles.
Dernière modification par malbo (Le 11/10/2014, à 16:00)
Hors ligne
#3 Le 10/10/2014, à 14:28
- Bouubouu
Re : Problème grub/bios suite installation windows 7
Reste a trouver un CD,
Dès que j'ai pu faire la manipulation je met le resultat ici
Hors ligne
#4 Le 10/10/2014, à 14:56
- malbo
Re : Problème grub/bios suite installation windows 7
Reste a trouver un CD,
Quand il s'agit de démarrer en mode UEFI, j'ai constaté chez moi qu'une clé USB de Super Grub2 Disk ne fonctionnait pas (impossible de booter) et qu'il était impératif de graver un CD (ou un CD ré-inscriptible). Par contre, quand il s'agit de booter en mode non-EFI, ce qui est ton cas (*), il est possible d'utiliser une clé USB de Super Grub2 Disk. On trouve des directives pour cela sur le site supergrubdisk.org : http://www.supergrubdisk.org/wizard-ste … o-a-media/
(*) ton ordi semble être un peu âgé : il n'est pas équipé du système UEFI si j'en crois le Boot-Info de ce post : http://forum.ubuntu-fr.org/viewtopic.ph … #p18249581
( il n'y est pas fait mention de la compatibilité UEFI)
Dernière modification par malbo (Le 10/10/2014, à 15:13)
Hors ligne
#5 Le 10/10/2014, à 15:49
- Bouubouu
Re : Problème grub/bios suite installation windows 7
Il a 2 ans , Hp elitebook8570w.
N'etant pas chez moi pas de clé en plus non plus, je vais essayé de trouver un cd avant ce soir.
Si le problème est toujours la après, formatage complet fera l'affaire, ça fais un moment que je lorgne des SSD msata pour booter, ça sera l'occasion.
Hors ligne
#6 Le 10/10/2014, à 15:59
- malbo
Re : Problème grub/bios suite installation windows 7
J'ai déconné dans mon post #4 : ton modèle HP EliteBook 8570w est bien équipé du système UEFI si j'en crois cette page : http://andre.blaatschaap.be/2013/10/uefi-boot/
On peut y lire :
My new laptop, the HP EliteBook 8570w has three options, legacy boot, uefi hybrid (both legacy and uefi / with csm), and native uefi (without csm).
EDIT le 11 oct 2014 : quoi qu'il en soit, tu peux au choix faire un CD ou une liveUSB pour SG2D puisque toi tu dois démarrer sur ce support en mode non-EFI (l'option Boot Mode dans ton "Bios" doit être sur "legacy boot")
Dernière modification par malbo (Le 11/10/2014, à 07:16)
Hors ligne
#7 Le 11/10/2014, à 14:13
- Bouubouu
Re : Problème grub/bios suite installation windows 7
Apres passage du boot de legacy vers UEFI hybrid(dans le bios) j'ai réussi a booter sur le CD et ensuite lancer mon linux.
Merci malbo.
Des pistes à suivre pour réussir a tout refaire marcher normalement ?
Hors ligne
#8 Le 11/10/2014, à 15:59
- malbo
Re : Problème grub/bios suite installation windows 7
Depuis une session de ton Ubuntu installé sur le disque dur, je te prie de passer cette commande dans un terminal :
sudo debconf-show grub-pc
Tu colleras la réponse obtenue dans ta réponse. Motif de ma demande : vérifier si Grub a correctement enregistré l'emplacement du chargeur d'amorçage. En effet, j'ai un gros doute parce que je vois ceci dans ton Boot-Info :
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6
and looks at sector 1421922400 of the same hard drive
for core.img. core.img is at this location and looks
in partition 112 for .
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
ce qui veut dire qu'il y a un chargeur d'amorçage de Grub dans le secteur de boot de la partition racine. Ce n'est pas correct.
Dernière modification par malbo (Le 11/10/2014, à 16:02)
Hors ligne
#9 Le 11/10/2014, à 17:07
- Bouubouu
Re : Problème grub/bios suite installation windows 7
Voila la réponse obtenue :
grub2/device_map_regenerated:
grub-pc/timeout: 10
grub-pc/install_devices_empty: false
grub2/linux_cmdline_default: quiet splash
grub-pc/chainload_from_menu.lst: true
grub-pc/partition_description:
grub2/linux_cmdline:
grub-pc/install_devices_failed: false
grub2/kfreebsd_cmdline_default: quiet splash
grub-pc/kopt_extracted: false
grub-pc/mixed_legacy_and_grub2: true
grub-pc/postrm_purge_boot_grub: false
grub2/kfreebsd_cmdline:
grub-pc/hidden_timeout: true
* grub-pc/install_devices: /dev/disk/by-id/ata-Hitachi_HTS727575A9E364_J3740084HRLJVE-part6
grub-pc/disk_description:
grub-pc/install_devices_disks_changed:
grub-pc/install_devices_failed_upgrade: true
Hors ligne
#10 Le 11/10/2014, à 17:32
- malbo
Re : Problème grub/bios suite installation windows 7
Voici la ligne extraite de ton résultat qui contient l'info intéressante :
* grub-pc/install_devices: /dev/disk/by-id/ata-Hitachi_HTS727575A9E364_J3740084HRLJVE-part6
la fin de ligne "-part6" veut dire qu'il s'agit de la partition 6 du disque dur Hitachi - c'est à dire sda6. C'est bien ce que je craignais et ça ne va pas du tout. Il va falloir que tu t'inspires de ce Tuto pour rectifier cela : http://forum.ubuntu-fr.org/viewtopic.ph … 0#p3970260
A la 5ème étape du tuto, il faudra que tu modifies ce qu'il y a actuellement (/dev/sda6) pour que ça devienne /dev/sda (pour désigner le MBR du disque dur comme emplacement du chargeur d'amorçage).
Tu feras la vérification finale par la commande "sudo debconf-show grub-pc" et tu devras constater que la ligne intéressante a perdu "-part6" et qu'elle est devenue :
* grub-pc/install_devices: /dev/disk/by-id/ata-Hitachi_HTS727575A9E364_J3740084HRLJVE
Dernière modification par malbo (Le 11/10/2014, à 17:32)
Hors ligne
#11 Le 11/10/2014, à 18:06
- Bouubouu
Re : Problème grub/bios suite installation windows 7
J'ai bien fais la modification mais toujours rien sans CD.
Le resultat de la commande apès la modif :
grub-pc/hidden_timeout: false
grub-pc/install_devices_failed: false
grub-pc/postrm_purge_boot_grub: false
grub-pc/install_devices_empty: false
* grub2/linux_cmdline_default: quiet splash
grub-pc/partition_description:
grub-pc/kopt_extracted: false
grub-pc/install_devices_failed_upgrade: true
grub-pc/install_devices_disks_changed:
grub2/kfreebsd_cmdline:
* grub-pc/install_devices: /dev/disk/by-id/ata-Hitachi_HTS727575A9E364_J3740084HRLJVE
grub2/device_map_regenerated:
grub-pc/timeout: 10
* grub2/linux_cmdline:
grub-pc/chainload_from_menu.lst: true
grub-pc/disk_description:
grub-pc/mixed_legacy_and_grub2: true
grub2/kfreebsd_cmdline_default: quiet splash
Hors ligne
#12 Le 11/10/2014, à 18:17
- malbo
Re : Problème grub/bios suite installation windows 7
Tu as fait ce qu'il fallait et en principe tu devrais pouvoir démarrer sur le disque dur. Si tu presses la touche F9 au démarrage de ton ordi, tu devrais pouvoir aller dans le Boot Menu et là tu devrais pouvoir sélectionner ton disque dur.
Hors ligne
#13 Le 11/10/2014, à 18:21
- Bouubouu
Re : Problème grub/bios suite installation windows 7
Oui ce que j'ai fais mais toujours la même page qui s'affiche
et jai testé les trois modes de boot différents
Dernière modification par Bouubouu (Le 11/10/2014, à 18:22)
Hors ligne
#14 Le 11/10/2014, à 18:25
- malbo
Re : Problème grub/bios suite installation windows 7
Il faut sélectionner le mode "legacy boot" dans le Bios et quitter le Bios en enregistrant la modif (je ne sais pas quelle est la touche qui convient pour faire ça dans le cas de ton modèle) et au redémarrage, tu tapotes la touche F9 pour faire apparaître le Boot Menu et tu sélectionnes le disque dur.
Hors ligne
#15 Le 12/10/2014, à 10:10
- Bouubouu
Re : Problème grub/bios suite installation windows 7
L'essai en mode legacy n'est pas concluant .
Toujours les mêmes lignes, No boot device found, j'ai l'impression que mon DD n'est pas reconnue comme boot et du coup je le vois pas dans les choix.
Hors ligne
#16 Le 12/10/2014, à 19:07
- malbo
Re : Problème grub/bios suite installation windows 7
Je suis à court d'idée désolé.
Hors ligne
#17 Le 15/10/2014, à 13:36
- Arbiel
Re : Problème grub/bios suite installation windows 7
Bonjour
Je constate que le problème n'est toujours par résolu. En reprenant les premiers éléments de la discussion, je comprends que dès le BIOS, le disque dur n'est pas proposé dans la liste des périphériques susceptibles d'être utilisés au démarrage.
Sans pouvoir être catégorique, je pense que cela peut être dû à un mauvais positionnement du drapeau "boot" qui se trouve sur une partition logique et non, comme il se devrait, à mon avis, sur l'une quelconque des partitions principales, même éventuellement sur la partition étendue.
Arbiel
Arbiel Perlacremaz
LDLC Aurore NK3S-8-S4 Ubuntu 20.04
Abandon d'azerty au profit de bépo, de google au profit de Lilo et de la messagerie électronique violable au profit de Protonmail, une messagerie chiffrée de poste de travail à poste de travail.
Hors ligne