#1 Le 12/06/2016, à 02:28
- Juniorack
'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour,
Au fait je suis nouveau sur ce forum et je vous prie de vouloir m'accueillir dans votre univers généreux !
J'ai un sérieux problème !
Hier, un ami m'a demandé de créer un Live-USB pour lui. J'ai utilisé MultiSystem pour créer le Live-USB tout est déroulé sans souci. Mais le moment de la création du Live-USB je devais formater la clef en Fat 32 je l'ai fait sans problème avec le gestionnaire de fichiers (clic droit sur le nom de la clef puis Formater) et à la fin de tache la clef était opérationnelle !
Mon problème c'est que quand aujourd'hui j'ai voulu allumer mon pc, pour rédiger notre rapport de Travaux Pratiques(TP), il ne démarre plus, il affiche sur l'écran "Insérez le disque système dans le lecteur. Appuyez sur une touche pour continuer...". Du coup j'ai fait le tour de la toile avec le message d'erreur mais sans solution.
Pour moi le problème est lié au formatage de la clef par Ubuntu 16.04 car c'est la deuxième fois que ce type de problème m'arrive.
Le premier est similaire au deuxième la différence c'est que pour le premier j'ai fait que formater une clef en retirant celle-là avant la fin du processus lent du formatage. Alors je pensais que le problème était lié au fait que j'ai interrompu le processus de formatage. Du coup j'ai réinstallé à nouveau mon système en perdant toutes mes données sauf celles qui étaient sauvegardées sur le pc de mon frère.
ET cette fois-ci pas de sauvegarde et je ne veux pas perdre mes données. Je sollicite votre aide !
Comment puis-je récupérer au moins mes données voire même ma configuration système qui m'est très chère ?
Hors ligne
#2 Le 12/06/2016, à 12:01
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour
Je ne pense pas que le problème provienne du formatage de la clé USB.
Tu vas booter avec cette clé USB ou son équivalent. Choisir
"essayer ubuntu avant de l'installer / Try ubuntu before installing".
Puis faire un boot-info et communiquer l'URL qui sera générée. https://doc.ubuntu-fr.org/tutoriel/boot-info
Enfin tu vas regarder la qualité du disque en installlant un logiciel
setxkbmap fr ## =====> qu'il faut souvent frapper setxkb,qp fr afin d'avoir un clavier français.
sudo apt-get install --no-install-recommends smartmontools
et donner le résultat de la commande
sudo smartctl -s on -a /dev/sda
Hors ligne
#3 Le 12/06/2016, à 13:41
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour merci pour votre reponse !
Au fait j'ai fait un boot-info mais il me crée un fichier au lieu d'un URL même en cliquant sur "Online report". En tout cas voici le contenu du fichier qui généré
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg
sda3: __________________________________________________________________________
File system: crypto_LUKS
Boot sector type: Unknown
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2101312 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
ubuntu-vg-root: ________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04 LTS
Boot files: /etc/fstab
ubuntu-vg-swap_1: ______________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 2,050,047 999,424 Data partition (Linux)
/dev/sda3 2,050,048 976,771,071 974,721,024 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.3 GB, 31260704768 bytes
255 heads, 63 sectors/track, 3800 cylinders, total 61056064 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 61,056,063 61,056,032 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f wU15dm-so4y-HSo0-ToL4-ULDE-kt5t-QykmuB LVM2_member
/dev/mapper/ubuntu--vg-root 1a27f155-bcec-4cf5-b26f-4ac0173450c0 ext4
/dev/mapper/ubuntu--vg-swap_1 0d43c530-7f6d-4732-ad40-0f503e4e3ce0 swap
/dev/sda1 C75E-FE4D vfat
/dev/sda2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1 ext2
/dev/sda3 bb5d5e51-5475-4268-a5d1-7a08d756c22f crypto_LUKS
/dev/sdb1 ACCA-5241 vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 12 10:56 ata-MATSHITADVD-RAM_UJ8E2_H086_555075 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jun 12 11:23 ata-TOSHIBA_MQ01ACF050_946UC27IT -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 12 10:56 ata-TOSHIBA_MQ01ACF050_946UC27IT-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 12 10:56 ata-TOSHIBA_MQ01ACF050_946UC27IT-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 12 11:14 ata-TOSHIBA_MQ01ACF050_946UC27IT-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-name-luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f -> ../../dm-0
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-name-ubuntu--vg-root -> ../../dm-1
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-name-ubuntu--vg-swap_1 -> ../../dm-2
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-uuid-CRYPT-LUKS1-bb5d5e5154754268a5d17a08d756c22f-luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f -> ../../dm-0
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-uuid-LVM-CwEcfWg2Fiy2GVBW0OOBRXkP5XtAWLnv9Wk02KiFUTSdx3az07p84fwjsFtaebqW -> ../../dm-1
lrwxrwxrwx 1 root root 10 Jun 12 11:23 dm-uuid-LVM-CwEcfWg2Fiy2GVBW0OOBRXkP5XtAWLnvwDxn7bFcVI6AkklGmEcRkkgI0tbiRQEZ -> ../../dm-2
lrwxrwxrwx 1 root root 9 Jun 12 11:23 usb-SanDisk_Cruzer_Blade_2004431862076072574D-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 12 10:56 usb-SanDisk_Cruzer_Blade_2004431862076072574D-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jun 12 11:23 wwn-0x50000395c4181b74 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 12 10:56 wwn-0x50000395c4181b74-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 12 10:56 wwn-0x50000395c4181b74-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 12 11:14 wwn-0x50000395c4181b74-part3 -> ../../sda3
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f
ubuntu--vg-root
ubuntu--vg-swap_1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/mapper/ubuntu--vg-root /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0 ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
============================= sda2/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
font="/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
linux /vmlinuz-4.4.0-24-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.4.0-24-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
menuentry 'Ubuntu, avec Linux 4.4.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-24-generic-advanced-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-24-generic…'
linux /vmlinuz-4.4.0-24-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-24-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-24-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-24-generic-init-upstart-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-24-generic…'
linux /vmlinuz-4.4.0-24-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-24-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-24-generic-recovery-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-24-generic…'
linux /vmlinuz-4.4.0-24-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-24-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-22-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-22-generic-advanced-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-22-generic…'
linux /vmlinuz-4.4.0-22-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-22-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-22-generic-init-upstart-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-22-generic…'
linux /vmlinuz-4.4.0-22-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-22-generic-recovery-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-22-generic…'
linux /vmlinuz-4.4.0-22-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-22-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /vmlinuz-4.4.0-21-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /vmlinuz-4.4.0-21-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-1a27f155-bcec-4cf5-b26f-4ac0173450c0' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
else
search --no-floppy --fs-uuid --set=root 62c86e8c-4909-4a8a-b23a-a1cb5a0067a1
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /vmlinuz-4.4.0-21-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.4.0-21-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
0.500976562 = 0.537919488 grub/grub.cfg 9
0.566102982 = 0.607848448 vmlinuz-4.4.0-21-generic 13
0.612979889 = 0.658182144 vmlinuz-4.4.0-22-generic 13
0.695012093 = 0.746263552 vmlinuz-4.4.0-22-generic.efi.signed 13
0.709031105 = 0.761316352 vmlinuz-4.4.0-24-generic 12
0.823923111 = 0.884680704 vmlinuz-4.4.0-24-generic.efi.signed 13
0.765191078 = 0.821617664 initrd.img-4.4.0-21-generic 15
0.704606056 = 0.756564992 initrd.img-4.4.0-22-generic 18
0.802309990 = 0.861473792 initrd.img-4.4.0-24-generic 19
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========================== ubuntu-vg-root/etc/fstab: ===========================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda2 during installation
UUID=62c86e8c-4909-4a8a-b23a-a1cb5a0067a1 /boot ext2 defaults 0 2
# /boot/efi was on /dev/sda1 during installation
UUID=C75E-FE4D /boot/efi vfat umask=0077 0 1
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 4c 55 4b 53 ba be 00 01 61 65 73 00 00 00 00 00 |LUKS....aes.....|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 00 00 00 00 00 00 00 00 78 74 73 2d 70 6c 61 69 |........xts-plai|
00000030 6e 36 34 00 00 00 00 00 00 00 00 00 00 00 00 00 |n64.............|
00000040 00 00 00 00 00 00 00 00 73 68 61 32 35 36 00 00 |........sha256..|
00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000060 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 40 |...............@|
00000070 c9 07 78 1c 05 09 cc a2 67 bc c3 af 80 34 5a 7e |..x.....g....4Z~|
00000080 a7 c2 1e a1 48 55 68 dd 4d 3a 61 18 f4 13 25 c7 |....HUh.M:a...%.|
00000090 e0 cc 62 9a c4 e7 d2 47 31 c8 ab 2f 24 00 93 42 |..b....G1../$..B|
000000a0 fd c1 de 0b 00 01 1e 9f 62 62 35 64 35 65 35 31 |........bb5d5e51|
000000b0 2d 35 34 37 35 2d 34 32 36 38 2d 61 35 64 31 2d |-5475-4268-a5d1-|
000000c0 37 61 30 38 64 37 35 36 63 32 32 66 00 00 00 00 |7a08d756c22f....|
000000d0 00 ac 71 f3 00 04 75 8d 39 6a 69 e3 26 e1 b3 fd |..q...u.9ji.&...|
000000e0 38 66 4d 3e ea f8 17 8a c7 fd f5 cf 43 e0 52 b4 |8fM>........C.R.|
000000f0 db 19 aa 9f ff 46 a6 60 00 00 00 08 00 00 0f a0 |.....F.`........|
00000100 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000120 00 00 00 00 00 00 00 00 00 00 02 00 00 00 0f a0 |................|
00000130 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000150 00 00 00 00 00 00 00 00 00 00 03 f8 00 00 0f a0 |................|
00000160 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 05 f0 00 00 0f a0 |................|
00000190 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 00 00 00 00 00 00 00 00 00 00 07 e8 00 00 0f a0 |................|
000001c0 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 09 e0 00 00 0f a0 |................|
000001f0 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/28591/mounts) leaked on lvs invocation. Parent PID 4102: bash
File descriptor 63 (pipe:[71578]) leaked on lvs invocation. Parent PID 4102: bash
File descriptor 9 (/proc/28591/mounts) leaked on lvchange invocation. Parent PID 4975: bash
File descriptor 63 (pipe:[71578]) leaked on lvchange invocation. Parent PID 4975: bash
File descriptor 9 (/proc/28591/mounts) leaked on lvchange invocation. Parent PID 4975: bash
File descriptor 63 (pipe:[71578]) leaked on lvchange invocation. Parent PID 4975: bash
mdadm: No arrays found in config file or automatically
ADDITIONAL INFORMATION :
=================== log of boot-info 2016-06-12__11h22 ===================
boot-info version : 4ppa37
boot-sav version : 4ppa37
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa37
BLKID BEFORE LVM ACTIVATION:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="C75E-FE4D" TYPE="vfat"
/dev/sda2: UUID="62c86e8c-4909-4a8a-b23a-a1cb5a0067a1" TYPE="ext2"
/dev/sda3: UUID="bb5d5e51-5475-4268-a5d1-7a08d756c22f" TYPE="crypto_LUKS"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="ACCA-5241" TYPE="vfat"
/dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f: UUID="wU15dm-so4y-HSo0-ToL4-ULDE-kt5t-QykmuB" TYPE="LVM2_member"
/dev/mapper/ubuntu--vg-root: UUID="1a27f155-bcec-4cf5-b26f-4ac0173450c0" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="0d43c530-7f6d-4732-ad40-0f503e4e3ce0" TYPE="swap"
MODPROBE
VGSCAN
File descriptor 9 (/proc/28591/mounts) leaked on vgscan invocation. Parent PID 28599: /bin/bash
Reading all physical volumes. This may take a while...
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 9 (/proc/28591/mounts) leaked on vgchange invocation. Parent PID 28599: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 9 (/proc/28591/mounts) leaked on lvscan invocation. Parent PID 28599: /bin/bash
LVSCAN:
ACTIVE '/dev/ubuntu-vg/root' [460.86 GiB] inherit
ACTIVE '/dev/ubuntu-vg/swap_1' [3.92 GiB] inherit
Is there RAID on this computer? no
boot-info is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root
mount: unknown filesystem type 'crypto_LUKS'
mount /dev/sda3 : Error code 32
mount -r /dev/sda3 /mnt/boot-sav/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount -r /dev/sda3 : Error code 32
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-root doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-swap_1 doesn't contain a valid partition table
=================== os-prober:
/dev/mapper/ubuntu--vg-root:Ubuntu 16.04 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="C75E-FE4D" TYPE="vfat"
/dev/sda2: UUID="62c86e8c-4909-4a8a-b23a-a1cb5a0067a1" TYPE="ext2"
/dev/sda3: UUID="bb5d5e51-5475-4268-a5d1-7a08d756c22f" TYPE="crypto_LUKS"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="ACCA-5241" TYPE="vfat"
/dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f: UUID="wU15dm-so4y-HSo0-ToL4-ULDE-kt5t-QykmuB" TYPE="LVM2_member"
/dev/mapper/ubuntu--vg-root: UUID="1a27f155-bcec-4cf5-b26f-4ac0173450c0" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="0d43c530-7f6d-4732-ad40-0f503e4e3ce0" TYPE="swap"
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
mount: unknown filesystem type 'crypto_LUKS'
mount /dev/sda3 : Error code 32
mount -r /dev/sda3 /mnt/boot-sav/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount -r /dev/sda3 : Error code 32
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 20 22:15 grub.d
total 76
-rwxr-xr-x 1 root root 9791 Apr 15 22:00 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 18:08 05_debian_theme
-rwxr-xr-x 1 root root 12261 Apr 15 22:00 10_linux
-rwxr-xr-x 1 root root 11082 Apr 15 22:00 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 12:44 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 15 22:00 30_os-prober
-rwxr-xr-x 1 root root 1418 Apr 15 22:00 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 15 22:00 40_custom
-rwxr-xr-x 1 root root 216 Apr 15 22:00 41_custom
-rw-r--r-- 1 root root 483 Apr 15 22:00 README
=================== /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of mapper/ubuntu--vg-root: UUID=C75E-FE4D (sda1)
/boot detected in the fstab of mapper/ubuntu--vg-root: UUID=62c86e8c-4909-4a8a-b23a-a1cb5a0067a1 (sda2)
=================== efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0000,0005,0004,0006,0003,0007,0009,0008
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(EFIubuntushimx64.efi)
Boot0001* ODD3 BIOS(3,0,58).......................................................................
Boot0002* LAN1 BIOS(80,0,58).......................................................................
Boot0003* M\E9moire USB ACPI(a0341d0,0)PCI(14,0)USB(0,0)
Boot0004* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...9................
Boot0005* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0006* HDD/SSD ACPI(a0341d0,0)PCI(1f,2)03120a00000000000000
Boot0007* ODD ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000
Boot0008* R\E9seau2 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0
Boot0009* R\E9seau1 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, is-sepboot, grubenv-ok nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
mapper/ubuntu--vg-root : sda, not-sepboot, no-grubenv grub2, signed grub-efi , update-grub, 64, no-boot, is-os, not--efi--part, fstab-has-goodBOOT, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA TOSHIBA MQ01ACF0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 EFI System Partition boot
2 538MB 1050MB 512MB ext2
3 1050MB 500GB 499GB
Model: SanDisk Cruzer Blade (scsi)
Disk /dev/sdb: 31.3GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 16.4kB 31.3GB 31.3GB primary fat32 boot, lba
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-root: 495GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 495GB 495GB ext4
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-swap_1: 4211MB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 4211MB 4211MB linux-swap(v1)
Error: /dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ACF0;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot;
2:538MB:1050MB:512MB:ext2::;
3:1050MB:500GB:499GB:::;
BYT;
/dev/sdb:31.3GB:scsi:512:512:msdos:SanDisk Cruzer Blade;
1:16.4kB:31.3GB:31.3GB:fat32::boot, lba;
BYT;
/dev/mapper/ubuntu--vg-root:495GB:dm:512:4096:loop:Linux device-mapper (linear);
1:0.00B:495GB:495GB:ext4::;
BYT;
/dev/mapper/ubuntu--vg-swap_1:4211MB:dm:512:4096:loop:Linux device-mapper (linear);
1:0.00B:4211MB:4211MB:linux-swap(v1)::;
Error: /dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f: unrecognised disk label
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 465.8G
sda1 part vfat 512M
sda2 part ext2 488M
sda3 part crypto_LUKS 464.8G
dm-0 crypt LVM2_member 464.8G
dm-1 lvm ext4 460.9G
dm-2 lvm swap 3.9G
sdb disk 29.1G
sdb1 part vfat 29.1G MYLINUXLIVE
sr0 rom 1024M
loop0 loop squashfs 962.1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
dm-0 1 0 0 running
dm-1 1 0 0 running /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0
dm-2 1 0 0 running
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
gvfsd-fuse on /home/ubuntu/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
/dev/mapper/ubuntu--vg-root on /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0 type ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext2 (rw)
=================== ls:
/sys/block/dm-0 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-2 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dm-2 dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout tpm0 ubuntu-vg uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f ubuntu--vg-root ubuntu--vg-swap_1
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 4d fe 5e c7 4e 4f 20 4e 41 4d 45 20 20 |..)M.^.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-root doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-swap_1 doesn't contain a valid partition table
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlay 1.9G 135M 1.8G 7% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 387M 1.3M 386M 1% /run
/dev/sdb1 vfat 30G 1011M 29G 4% /cdrom
/dev/loop0 squashfs 963M 963M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 332K 1.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 80K 1.9G 1% /run/shm
none tmpfs 100M 72K 100M 1% /run/user
/dev/mapper/ubuntu--vg-root ext4 454G 244G 187G 57% /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0
/dev/sda1 vfat 511M 3.6M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext2 473M 170M 279M 38% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 31.3 GB, 31260704768 bytes
255 heads, 63 sectors/track, 3800 cylinders, total 61056064 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 32 61056063 30528016 c W95 FAT32 (LBA)
Disk /dev/mapper/luks-bb5d5e51-5475-4268-a5d1-7a08d756c22f: 499.1 GB, 499055067136 bytes
255 heads, 63 sectors/track, 60673 cylinders, total 974716928 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/ubuntu--vg-root: 494.8 GB, 494839791616 bytes
255 heads, 63 sectors/track, 60160 cylinders, total 966483968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/ubuntu--vg-swap_1: 4211 MB, 4211081216 bytes
255 heads, 63 sectors/track, 511 cylinders, total 8224768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
gui-tab-other.sh: line 93: _checkbutton_repairfilesystems: command not found
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub enable-raid enable-lvm) and reinstall the grub-efi-amd64-signed of mapper/ubuntu--vg-root, using the following options: sda2/boot, sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems use-standard-efi-file rename-ms-efi
=================== Advice in case of suggested repair
You may want to retry after decrypting your partitions. (https://help.ubuntu.com/community/EncryptedPrivateDirectory)
Do you want to continue?
=================== User settings
The settings chosen by the user will not act on the boot.
Voici ce que donne la commande
sudo smartctl -s on -a /dev/sda
Device Model: TOSHIBA MQ01ACF050 Serial Number: 946UC27IT LU WWN Device Id: 5 000039 5c4181b74 Firmware Version: AV001M User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jun 12 11:17:28 2016 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 99) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2015 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 314 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 270 10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 268 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 15 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 13959173 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 26/62) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 243 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 253 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Je vous informe aussi qu'avec le mode live ubuntu(essayer ubuntu avant de l'installer) j'ai vu mon lecteur et pu y acceder avec mon mot de passe Il y a toutes mes données !!!
Voila j'espère que c'est tout ce qu'il vous faut pour m'aider d'avantage !
Dernière modification par Juniorack (Le 12/06/2016, à 13:44)
Hors ligne
#4 Le 12/06/2016, à 14:17
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Je ne comprends pas ce qui t'arrive.
Le disque est en excellente qualité.
Ton bios est positionné EFI
=================== efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0000,0005,0004,0006,0003,0007,0009,0008
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(EFIubuntushimx64.efi)
Boot0001* ODD3 BIOS(3,0,58).......................................................................
Boot0002* LAN1 BIOS(80,0,58).......................................................................
Boot0003* M\E9moire USB ACPI(a0341d0,0)PCI(14,0)USB(0,0)
Boot0004* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...9................
Boot0005* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0006* HDD/SSD ACPI(a0341d0,0)PCI(1f,2)03120a00000000000000
Boot0007* ODD ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000
Boot0008* R\E9seau2 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0
Boot0009* R\E9seau1 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
Et la structure de boot EFI est correcte
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
Mais il y a une partie de codif que je ne comprends pas dans la ligne qui doit faire booter ubuntu en premier
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(EFIubuntushimx64.efi)
Si cette valeur a été modifiée, pour une raison que je ne comprends pas, C'est la ligne 0005 qui prend le relais. Et windows n'est pas présent.
Une hypothèse. Tu arrêtes mal le micro, et il continue à vouloir booter avec la clé USB que tu as bien enlevée.
Mets bien le micro hors tension. Et retentes un boot.
Si cela ne fonctionne toujours pas, indiques la référence exacte de ton micro afin de pouvoir faire une recherche internet ciblée.
Dernière modification par Bougron (Le 12/06/2016, à 16:03)
Hors ligne
#5 Le 12/06/2016, à 15:34
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Mais il y a une partie de codif que je ne comprends pas dans la ligne qui doit faire booter ubuntu en premier
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(EFIubuntushimx64.efi)
Si cette valeur a été modifiée, pour une raison que je ne comprends pas, C'est la ligne 0005 qui prend le relais. Et windows n'est pas présent.
Cela est un peu flou pour moi ! et je n'arrive pas à m'y retrouver.
Une hypothèse. Tu arrêtes mal le micro, et il continue à vouloir booter avec la clé USB que tu as bien enlevée.
Si je comprens par micro, ma machine oui bien sûr je l'ai bien arrêté. je viens même d'enlèver la batterie(sans sous secteur aussi) mais c'est toujours le même problème.
Concernant la référence de la machine voici sur ce lien tous les détails necessaires !
Voilà comme vous avez pu voir sur le lien le pc est venu avec win7(+ un CD win8) préinstallé. Donc j'ai voulu mettre à niveau vers win10 pour faire un dualboot avec ubuntu mais ça n'a pas marché du coup j'ai fait un choix prioritaire en installant Ubuntu 16.04 tout seul.
Infos supplémentaire: J'avais aussi du mal à utiliser les touches F1_12( ex: j'avais pas accès aux terminaux tty)
Peut être win a du laissé ses traces sans que je le sache alors que j'avais formaté toutes les partitions lors de la première installation d'Ubuntu !
Hors ligne
#6 Le 12/06/2016, à 15:59
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour
Je suis maintenant quasiment convaincu que le coupable est MULTISYSTEM. Il a déjà été signalé comme ayant cette fonctionnalité.
Je pense que tu n'as plus la clé que tu as fabriquéee...
Car j'ai trouvé dans internet la bonne structure que la ligne de boot devrait avoir pour ce modèle de micro...
https://forums.opensuse.org/showthread. … ng-to-boot
Boot0007* opensuse-secureboot HD(1,800,201800,5d75efae-30bf-45f9-a153-7b1a08dbcc95)File(\EFI\opensuse\shim.efi)
C'est une structure que je sais décodifier
Tu vas faire la réparation recommandée avec boot-repair.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub enable-raid enable-lvm) and reinstall the grub-efi-amd64-signed of mapper/ubuntu--vg-root, using the following options: sda2/boot, sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems use-standard-efi-file rename-ms-efi
Puis tu termineras avec la commande
sudo efibootmgr -v
Car si c'est mal réparé, on le fera à la main.
Hors ligne
#7 Le 12/06/2016, à 16:23
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Voilà comme vous avez pu voir sur le lien le pc est venu avec win7(+ un CD win8) préinstallé. Donc j'ai voulu mettre à niveau vers win10 pour faire un dualboot avec ubuntu mais ça n'a pas marché du coup j'ai fait un choix prioritaire en installant Ubuntu 16.04 tout seul.
Pour info. Si tu souhaites installer un nouveau windows 10 pour t'en servir, C'est assez facile, le logiciel est téléchargeable et installable avec ubuntu. https://forum.ubuntu-fr.org/viewtopic.p … #p20808281
Hors ligne
#8 Le 12/06/2016, à 16:26
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Alors voià, après le boot-repair, ce que ça m'a donné
ubuntu@ubuntu:~$ sudo efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0000,0005,0004,0006,0003,0007,0009,0008
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(\EFI\ubuntu\shimx64.efi)
Boot0001* ODD3 BIOS(3,0,58).......................................................................
Boot0002* LAN1 BIOS(80,0,58).......................................................................
Boot0003* Mmoire USB ACPI(a0341d0,0)PCI(14,0)USB(0,0)
Boot0004* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...9................
Boot0005* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0006* HDD/SSD ACPI(a0341d0,0)PCI(1f,2)03120a00000000000000
Boot0007* ODD ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000
Boot0008* Rseau2 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0
Boot0009* Rseau1 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000
Avant de quitter ma séssion live j'ai voulu faire cette copie/collé. Je reviens dans un instant avec les résultats après le rédemarrage !
Hors ligne
#9 Le 12/06/2016, à 16:56
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Ce n'est pas réparé.....
On va donc le faire à la main.
a) Il faut que tu identifies le disque qui contient UBUNTU
sudo fdisk -l
Je pense qu'il est sdb et non sda
Tu fabriques l'entrée de boot EFI
sudo efibootmgr -c -d sdb -p 1 -L "Ubuntu" -l "/EFI/ubuntu/shimx64.efi"
ATTENTION. Grosse erreur de codif: C'est
sudo efibootmgr -c -d /dev/sda -p 1 -L "Ubuntu" -l "\EFI\ubuntu\shimx64.efi"
et tu vérifies
sudo efibootmgr -v
Dernière modification par Bougron (Le 12/06/2016, à 19:31)
Hors ligne
#10 Le 12/06/2016, à 17:28
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
sudo fdisk -l
m'a donné ça
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Disk /dev/sdb: 31.3 GB, 31260704768 bytes
255 heads, 63 sectors/track, 3800 cylinders, total 61056064 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Vu la différence de taille j'espère que c'est sda que ubuntu est installé !
Mais la commande
sudo efibootmgr -c -d sda -p 1 -L 'Ubuntu' -l '/EFI/ubuntu/shimx64.efi'
me donne le message d'erreur "Could not open disk sda: No such file or directory" j'ai essayé aussi avec sdb toujours même blem "Could not open disk sdb: No such file or directory"
voici un Imp.ecran lors du boot.repair si ça peut aider !
Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre ou TDCT'Pix le permettent).
Dernière modification par cqfd93 (Le 12/06/2016, à 17:43)
Hors ligne
#11 Le 12/06/2016, à 17:37
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
J'ai oublié le montage
sudo mount -v /dev/sda1 /mnt
La suite est sans changement
Si tu souhaites réutiliser le logiciel, lis cette info
https://forum.ubuntu-fr.org/viewtopic.p … #p21513461
Dernière modification par Bougron (Le 12/06/2016, à 17:46)
Hors ligne
#12 Le 12/06/2016, à 17:47
- moko138
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Hors-sujet :
Le disque est jeune, mais il est déjà trop monté en température
9 Power_On_Hours - 270
194 Temperature_Celsius - 36 (Min/Max 26/62)
12 Power_Cycle_Count - 268
Donc durée moyenne d'une session : 1 heure
193 Load_Cycle_Count - 3150
Un parcage toutes les 5 minutes et 10".
Il va falloir augmenter cette fréquence pour empêcher la température de monter et d'atteindre des valeurs usantes.
Merci de donner :
sudo hdparm -B /dev/sda
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 12/06/2016, à 18:08
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
J'ai oublié le montage
sudo mount -v /dev/sda1 /mnt
ça donne
mount: you didn't specify a filesystem type for /dev/sda1
I will try type vfat
mount: /dev/sda1 already mounted or /mnt busy
Et
sudo efibootmgr -c -d sda -p 1 -L 'Ubuntu' -l '/EFI/ubuntu/shimx64.efi'
encore donne toujours le même message d'erreur
moko138 a écrit :Il va falloir augmenter cette fréquence pour empêcher la température de monter et d'atteindre des valeurs usantes.
Merci de donner :
ubuntu@ubuntu:~$ sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 254
Hors ligne
#14 Le 12/06/2016, à 18:19
- Babdu89
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour.
Hors sujet et conseils aussi.
L'installation est faite avec un système chiffré et LVM
Dans ce type d'installation,il y a une petite partition /boot /dev/da2 taille 473 Mo. déjà pleine (remplie) à 38%.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlay 1.9G 135M 1.8G 7% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 387M 1.3M 386M 1% /run
/dev/sdb1 vfat 30G 1011M 29G 4% /cdrom
/dev/loop0 squashfs 963M 963M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 332K 1.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 80K 1.9G 1% /run/shm
none tmpfs 100M 72K 100M 1% /run/user
/dev/mapper/ubuntu--vg-root ext4 454G 244G 187G 57% /media/ubuntu/1a27f155-bcec-4cf5-b26f-4ac0173450c0
/dev/sda1 vfat 511M 3.6M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext2 473M 170M 279M 38% /mnt/boot-sav/sda2
C'est dans cette partition que vont s’accumuler les futures versions des noyaux qui seront installé par les mises à jour système.
Ce en plus de ceux qui y sont déjà ( 4.4.0-21, 4.4.0-22, 4.4.0-24) .
Un jour la partition /boot sera pleine, et le système va bloquer au moment des mises à jour système. Je pense encore une ou deux versions suivante, et çà bloque... Problème connu.
Pour prévenir; installer/utiliser Kclean
https://forum.ubuntu-fr.org/viewtopic.php?id=242358
Pour faire du nettoyage de temps à autres.
Ou, installer/utiliser le script de nany qui fera l'opération automatiquement ;
Ici les explications de ce qu'il se passe, comme je l'indique avec la partition /boot qui se remplit.
https://forum.ubuntu-fr.org/viewtopic.php?id=1970941
6) Automatiser le nettoyage sur un système sain.
Autre chose, juniorack a dit avoir accès à ses données dans le système chiffré avec le mot de passe, la pass phrase en fait.
Çà c'est le problème avec les installations chiffrées, si jamais çà se passe mal un jour, plus d'accès au données, ou alors très difficilement...
Faire des installation complètement chiffrée, n'est pas ce qu'il y a de mieux. Il vaut faire une installation sans chiffrement, et par la suite chiffrer les dossiers qui ont besoin de l'être....
Fin du hors sujet.
@+. Babdu89 .
Dernière modification par Babdu89 (Le 12/06/2016, à 23:08)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#15 Le 12/06/2016, à 18:45
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bougron a écrit :J'ai oublié le montage
sudo mount -v /dev/sda1 /mnt
ça donne
mount: you didn't specify a filesystem type for /dev/sda1 I will try type vfat mount: /dev/sda1 already mounted or /mnt busy
Et
sudo efibootmgr -c -d sda -p 1 -L 'Ubuntu' -l '/EFI/ubuntu/shimx64.efi'
encore donne toujours le même message d'erreur
Désolé, Je ne vais pas savoir te faire réparer cette codif
Je te propose de booter d'une autre façon en installant supergrub2 qui te permettra de lancer ubuntu. Dans ubuntu, tu pourras faire la commande de remise en ordre.
https://forum.ubuntu-fr.org/viewtopic.php?id=1287711
La procédure est faite pour une clé USB créée par LiIusbcreator, Mais elle doit marcher aussi pour une clé faite avec Multisystem.
Dernière modification par Bougron (Le 12/06/2016, à 18:46)
Hors ligne
#16 Le 12/06/2016, à 19:18
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
J'ai fais une double énorme erreur de codif
sudo efibootmgr -c -d /dev/sda -p 1 -L 'Ubuntu' -l '\EFI\ubuntu\shimx64.efi'
qui peut aussi s'écrire
sudo efibootmgr -c -d /dev/sda -p 1 -L "Ubuntu" -l "\EFI\ubuntu\shimx64.efi"
Dernière modification par Bougron (Le 12/06/2016, à 19:32)
Hors ligne
#17 Le 12/06/2016, à 20:38
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bon merci pour la correction !
Voilà ce que ça donne !
ubuntu@ubuntu:~$ sudo efibootmgr -c -d /dev/sda -p 1 -L 'Ubuntu' -l '\EFI\ubuntu\shimx64.efi'
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 000A,0007,0000,0005,0004,0006,0003,0009,0008
Boot0000* ubuntu
Boot0001* ODD3
Boot0002* LAN1
Boot0003* Mmoire USB
Boot0004* Windows Boot Manager
Boot0005* Windows Boot Manager
Boot0006* HDD/SSD
Boot0007* ODD
Boot0008* Rseau2
Boot0009* Rseau1
Boot000A* Ubuntu
Et puis
ubuntu@ubuntu:~$ sudo efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 000A,0007,0000,0005,0004,0006,0003,0009,0008
Boot0000* ubuntu HD(1,800,3a2af00,df1d0acf)File(\EFI\ubuntu\shimx64.efi)
Boot0001* ODD3 BIOS(3,0,58).......................................................................
Boot0002* LAN1 BIOS(80,0,58).......................................................................
Boot0003* Mmoire USB ACPI(a0341d0,0)PCI(14,0)USB(0,0)
Boot0004* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...9................
Boot0005* Windows Boot Manager HD(2,200800,32000,432faee5-0f5d-11e6-be04-8cc905e1d39e)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0006* HDD/SSD ACPI(a0341d0,0)PCI(1f,2)03120a00000000000000
Boot0007* ODD ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000
Boot0008* Rseau2 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0
Boot0009* Rseau1 ACPI(a0341d0,0)PCI(1c,0)PCI(0,0)MAC(b86b23118a84,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000
Boot000A* Ubuntu HD(1,800,100000,3124b065-144a-4243-ae5b-513944529d47)File(\EFI\ubuntu\shimx64.efi)
.
j'étais prêt à passer au plan B déjà que mes données sont accessibles(L/E) en live session. Mais je vous envoie le resultat après le reboot !
Hors ligne
#18 Le 13/06/2016, à 02:03
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonsoir
Si ton Toshiba n'a pas de piège, cela devrait marcher
BootOrder: 000A,0007,0000,0005,0004,0006,0003,0009,0008
Cela va booter en premier par l'entrée 000A qui contient
Boot000A* Ubuntu HD(1,800,100000,3124b065-144a-4243-ae5b-513944529d47)File(\EFI\ubuntu\shimx64.efi)
C'est maintenant le UUID 3124b065-144a-4243-ae5b-513944529d47 que j'estime être
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
Dernière modification par Bougron (Le 13/06/2016, à 02:04)
Hors ligne
#19 Le 13/06/2016, à 15:12
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour
Le pc a bien démarré et a reconnu aussi la partition sur laquelle Ubuntu est installé. Mais au moment du démarrage il reste bloqué en m'affichant un message d'erreur de Busy Box avec un shell ouvert initramfs_
Voici ce qui pouvait être derrière ce message d'erreur :
Du coup j'ai fait des recherches avec les messages d'erreur mais aucune des solutions proposées dans les forums n'a marché pour moi !
Merci d'avance !!
Hors ligne
#20 Le 13/06/2016, à 18:36
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonjour.
Je ne sais que dire pour ce problème car je ne crypte pas le logiciel mais simplement mes données personnelles
On va regarder ce que le boot-efi fait mettre en route.
Je pense qu'il fait mettre en route directement ubuntu alors qu'il faut peut-être passer par la partition de boot en EXT2.
Donc de nouveau avec la live-usb "essayer avant d'installer" puis
sudo mount -v /dev/sda1 /mnt
pg /mnt/EFI/ubuntu/grub.cfg
et donner le résultat qui sera affiché
sudo umount /dev/sda1
sudo mount -v /dev/sda2 /mnt
pg /grub/grub.cfg
et donner le résultat qui sera affiché
Dernière modification par Bougron (Le 14/06/2016, à 01:10)
Hors ligne
#21 Le 14/06/2016, à 00:07
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Super !! je suis arrivé à contourner cet erreur !
D'abord j'ai essayé l'idée de Bougron
Donc de nouveau avec la live-usb "essayer avant d'installer" puis
sudo mount -v /dev/sda1 /mnt pg /mnt/EFI/ubuntu/grub.cfg
sudo umount /dev/sda1 sudo mount -v /dev/sda2 /mnt pg /grub/grub.cfg
Cela n'a pas marché pour moi alors j'ai fouillé dans la toile et ai constaté que plusieurs linuxiens ont eu ce genre de blem causé par un kernel, bon peut être je ne sais pas trop.
J'ai utilisé le MDE(msg d'erreur) "ubuntu vg root does not exist" alors suis tombé sur ce forum(en) qui m'a donné l'idée de supprimer d'autres noyaux que je possédais dont voici
.....@....:~$ dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)"
ii linux-generic 4.4.0.24.25 amd64 Complete Generic Linux kernel and headers
ii linux-headers-4.4.0-21 4.4.0-21.37 all Header files related to Linux kernel version 4.4.0
ii linux-headers-4.4.0-21-generic 4.4.0-21.37 amd64 Linux kernel headers for version 4.4.0 on 64 bit x86 SMP
ii linux-headers-4.4.0-22 4.4.0-22.40 all Header files related to Linux kernel version 4.4.0
ii linux-headers-4.4.0-22-generic 4.4.0-22.40 amd64 Linux kernel headers for version 4.4.0 on 64 bit x86 SMP
ii linux-headers-4.4.0-24 4.4.0-24.43 all Header files related to Linux kernel version 4.4.0
ii linux-headers-4.4.0-24-generic 4.4.0-24.43 amd64 Linux kernel headers for version 4.4.0 on 64 bit x86 SMP
ii linux-headers-generic 4.4.0.24.25 amd64 Generic Linux kernel headers
ii linux-image-4.4.0-21-generic 4.4.0-21.37 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
ii linux-image-4.4.0-22-generic 4.4.0-22.40 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
ii linux-image-4.4.0-24-generic 4.4.0-24.43 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
ii linux-image-extra-4.4.0-21-generic 4.4.0-21.37 amd64 Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
ii linux-image-extra-4.4.0-22-generic 4.4.0-22.40 amd64 Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
ii linux-image-extra-4.4.0-24-generic 4.4.0-24.43 amd64 Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
ii linux-image-generic 4.4.0.24.25 amd64 Generic Linux kernel image
ii linux-signed-generic 4.4.0.24.25 amd64 Complete Signed Generic Linux kernel and headers
ii linux-signed-image-4.4.0-22-generic 4.4.0-22.40 amd64 Signed kernel image generic
ii linux-signed-image-4.4.0-24-generic 4.4.0-24.43 amd64 Signed kernel image generic
ii linux-signed-image-generic 4.4.0.24.25 amd64 Signed Generic Linux kernel image
D'abord avant de procéder à la suppression j'ai cherché à savoir le quel des ces noyaux posait problème en procédant ainsi :
- J'avais déjà utilisé le poste #16 de Bougron pour changer l'ordre de boot c'est fait et ça a marché ! Merci à Bougron !
- En redémarrant le micro, je suis tombé sur le menu de Grub Image Grub et dans
Advanced options for Ubuntu
j'ai lancé Ubuntu avec le noyau
linux-headers-4.4.0-21-generic 4.4.0-21.37
et miraculeusement tout est dans l'ordre j'ai entré ma pass phrase .... !
Problème résolut bon en tout cas pour le moment !! Et j'en suis vraiment reconnaissant !
Hors ligne
#22 Le 14/06/2016, à 01:25
- Bougron
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Bonsoir
Excellente idée d'utiliser les options avancées.
mais je ne comprends pas du tout pourquoi la version 4.4.0.24 a cessé de fonctionner...
Tu sais donc que la version linux-headers-4.4.0-21-generic 4.4.0-21.37 fonctionne
Il te reste à y aller avec la version 4.4.0-22 qui devrait certainement encore fonctionner
et tu feras les commandes
sudo apt update
sudo apt upgrade
afin d'avoir les dernières mises à jour
Dernière modification par Bougron (Le 14/06/2016, à 01:42)
Hors ligne
#23 Le 14/06/2016, à 01:32
- Juniorack
Re : 'Insérez un disque système dans le lecteur' ubuntu 16.04
Oui c'est fait !
uname -r
me donne ça
4.4.0-22-generic
Et merci encore !!
Hors ligne