Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Appel à contributeurs pour la doc.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 21/04/2017, à 17:32

Deux

connexion xubuntu impossible

Bonjour,

je suis sous xubuntu 12.04

lorsque j'allume mon pc, je choisis ma partition xubuntu comme d'habitude, ensuite l'écran affiche

speech-dispatcher disabled; e[OK] t
c/default/speech-dispatcher
saned disabled; edit /etc/default/saned

et reste bloqué là dessus.

Quelqu'un sait-il comment faire ?

Je précise que j'ai un vieux pc, c'est pour ça que je suis resté à 12.04, car au-dessus mon pc n'était pas assez puissant.Et je précise aussi que je suis loin d'être doué en informatique...

J'ai essayé de me connecter avec le recovery mode mais il ne se passe pas grand chose, le mode attend des instructions mais je ne sais pas quoi écrire.

Merci

Dernière modification par Deux (Le 21/04/2017, à 17:35)

Hors ligne

#2 Le 23/04/2017, à 16:58

tarkan99

Re : connexion xubuntu impossible

salut,

xubuntu 12.04 n'est plus maintenu depuis bien longtemps.

avec une session live, essai de faire un boot info pour voir si ton disque système n'est pas plein (tu trouveras toutes les info dans la partie Doc du site).

Sinon, as-tu testé lubuntu 16.04.1 en 32 bits ?

Dernière modification par tarkan99 (Le 23/04/2017, à 16:59)


xubuntu 16.04.1 sur HP probook 6560b et sur vieux Core 2 duo
lubuntu 16.04.2 sur Samsung NC10

Hors ligne

#3 Le 24/04/2017, à 14:46

Deux

Re : connexion xubuntu impossible

Merci pour l'aide.

Je n'arrive pas à faire le boot info (j'ai suivi la procédure spéciale pour 12.04 qui est indiquée sur la documentation):

xubuntu@xubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
You are about to add the following PPA to your system:
 Simple tool to repair frequent boot problems.

Website: [url]https://sourceforge.net/p/boot-repair/home[/url]
 More info: [url]https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair[/url]
Press [ENTER] to continue or ctrl-c to cancel adding it

Exception in thread Thread-1:
Traceback (most recent call last):
  File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
    self.run()
  File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 99, in run
    self.add_ppa_signing_key(self.ppa_path)
  File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 132, in add_ppa_signing_key
    tmp_keyring_dir = tempfile.mkdtemp()
  File "/usr/lib/python2.7/tempfile.py", line 322, in mkdtemp
    name = names.next()
  File "/usr/lib/python2.7/tempfile.py", line 141, in next
    letters = [choose(c) for dummy in "123456"]
  File "/usr/lib/python2.7/random.py", line 274, in choice
    return seq[int(self.random() * len(seq))]  # raises IndexError if seq is empty
ValueError: cannot convert float NaN to integer

Je vais essayer de créér une clé usb avec boot-repair disk.

Sinon j'ai réussi à récupérer mes données grâce au livecd.
Et lubuntu a l'air effectivement plus léger donc je pense essayer de migrer vers ce système quand j'aurai réussi à accéder à xubuntu (à moins que je puisse migrer directement mais j'imagine que c'est pas possible et que ça ne réglerait pas le problème ?).

Pour l'instant je vais essayer le boot repair disk...


Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 24/04/2017, à 17:40)

Hors ligne

#4 Le 24/04/2017, à 15:06

tarkan99

Re : connexion xubuntu impossible

via le liveCD, peux-tu faire une analyse smart du disque ?

Avant de lancer une installation, mieux vaut s'assurer que le disque est sain.

https://doc.ubuntu-fr.org/smartmontools … ssion_live

puis

 sudo smartctl -a /dev/sdX

où X est le disque

Si le disque est sain et si tu as récupéré toutes des données, je te conseille d'installer lubuntu en partant de 0.


xubuntu 16.04.1 sur HP probook 6560b et sur vieux Core 2 duo
lubuntu 16.04.2 sur Samsung NC10

Hors ligne

#5 Le 25/04/2017, à 14:59

Deux

Re : connexion xubuntu impossible

Ok, donc j'ai d'abord tapé la commande pour avoir les infos trouvées par SMART sur le disque

(pour info mon disque a une partition avec windows xp dessus)

xubuntu@xubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor DiamondMax Plus 9
Device Model:     Maxtor 6Y080L0
Serial Number:    Y27QQHDE
Firmware Version: YAR41BW0
User Capacity:    80 000 000 000 bytes [80,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Tue Apr 25 12:03:33 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  241) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  36) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   224   224   063    Pre-fail  Always       -       9597
  4 Start_Stop_Count        0x0032   251   251   000    Old_age   Always       -       5679
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   251   238   187    Pre-fail  Always       -       64610
  9 Power_On_Minutes        0x0032   094   094   000    Old_age   Always       -       530h+19m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   239   239   000    Old_age   Always       -       5538
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       37
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       6317
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   197   189   000    Old_age   Offline      -       10
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   213   000    Old_age   Always       -       13
202 Data_Address_Mark_Errs  0x000a   253   247   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       1
204 Soft_ECC_Correction     0x000a   253   252   000    Old_age   Always       -       0
205 Thermal_Asperity_Rate   0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   194   190   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 11 inconsistent with error log pointer 5

ATA Error Count: 11 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 41 6e 29 a8 e4  Error: ICRC, ABRT at LBA = 0x04a8296e = 78129518

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 80 2f 29 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 af 28 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 2f 28 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 af 27 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 2f 27 a8 e4 00      00:07:20.400  WRITE DMA

Error 10 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 06 29 12 a8 e4  Error: ICRC, ABRT at LBA = 0x04a81229 = 78123561

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 80 af 11 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 2f 11 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 af 10 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 2f 10 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 af 0f a8 e4 00      00:04:42.336  WRITE DMA

Error 9 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 e7 d2 40 e5  Error: ICRC, ABRT at LBA = 0x0540d2e7 = 88134375

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 e7 d2 40 e5 00      00:04:39.200  READ DMA
  c8 00 80 67 d2 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 e7 d1 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 67 d1 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 e7 d0 40 e5 00      00:04:38.976  READ DMA

Error 8 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 6f 25 66 e2  Error: ICRC, ABRT at LBA = 0x0266256f = 40248687

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 78 6f 25 66 e2 00      00:08:11.392  READ DMA
  c8 00 80 ef 24 66 e2 00      00:08:11.392  READ DMA
  c8 00 08 e7 24 66 e2 00      00:08:11.392  READ DMA
  c8 00 08 e7 24 66 e2 00      00:08:11.376  READ DMA
  c8 00 08 3f 84 c7 e7 00      00:08:11.360  READ DMA

Error 7 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 6f 25 66 e2  Error: ICRC, ABRT at LBA = 0x0266256f = 40248687

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 78 6f 25 66 e2 00      00:32:26.304  READ DMA
  c8 00 80 ef 24 66 e2 00      00:32:26.304  READ DMA
  c8 00 08 e7 24 66 e2 00      00:32:26.304  READ DMA
  ca 00 08 47 00 5e e0 00      00:32:26.288  WRITE DMA
  ca 00 38 5f 98 5f e0 00      00:32:26.288  WRITE DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     51697         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ensuite j'ai fait un test long dont voici le résultat:

xubuntu@xubuntu:~$ sudo smartctl -t long  /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 36 minutes for test to complete.
Test will complete after Tue Apr 25 12:48:34 2017

Use smartctl -X to abort test.
xubuntu@xubuntu:~$ sudo smartctl -l selftest /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       10%     51697         129914729
# 2  Short offline       Completed without error       00%     51697         -
# 3  Short offline       Completed without error       00%     51697         -
# 4  Short offline       Completed without error       00%     51697         -

Et ça c'est le résultat de la commande infos sur l'état actuel d'un disque (mais ça a l'air de ressembler à la première partie de mon message)

xubuntu@xubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor DiamondMax Plus 9
Device Model:     Maxtor 6Y080L0
Serial Number:    Y27QQHDE
Firmware Version: YAR41BW0
User Capacity:    80 000 000 000 bytes [80,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Tue Apr 25 13:02:03 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 113)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(  241) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  36) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   224   224   063    Pre-fail  Always       -       9597
  4 Start_Stop_Count        0x0032   251   251   000    Old_age   Always       -       5679
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       2
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   250   238   187    Pre-fail  Always       -       38868
  9 Power_On_Minutes        0x0032   094   094   000    Old_age   Always       -       531h+17m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   239   239   000    Old_age   Always       -       5538
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       37
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       5118
196 Reallocated_Event_Count 0x0008   251   251   000    Old_age   Offline      -       2
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       2
198 Offline_Uncorrectable   0x0008   250   250   000    Old_age   Offline      -       3
199 UDMA_CRC_Error_Count    0x0008   197   189   000    Old_age   Offline      -       10
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   213   000    Old_age   Always       -       7
202 Data_Address_Mark_Errs  0x000a   253   247   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       2
204 Soft_ECC_Correction     0x000a   253   252   000    Old_age   Always       -       0
205 Thermal_Asperity_Rate   0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   194   190   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 11 inconsistent with error log pointer 5

ATA Error Count: 11 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 41 6e 29 a8 e4  Error: ICRC, ABRT at LBA = 0x04a8296e = 78129518

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 80 2f 29 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 af 28 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 2f 28 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 af 27 a8 e4 00      00:07:20.400  WRITE DMA
  ca 00 80 2f 27 a8 e4 00      00:07:20.400  WRITE DMA

Error 10 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 06 29 12 a8 e4  Error: ICRC, ABRT at LBA = 0x04a81229 = 78123561

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 80 af 11 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 2f 11 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 af 10 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 2f 10 a8 e4 00      00:04:42.336  WRITE DMA
  ca 00 80 af 0f a8 e4 00      00:04:42.336  WRITE DMA

Error 9 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 e7 d2 40 e5  Error: ICRC, ABRT at LBA = 0x0540d2e7 = 88134375

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 e7 d2 40 e5 00      00:04:39.200  READ DMA
  c8 00 80 67 d2 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 e7 d1 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 67 d1 40 e5 00      00:04:38.992  READ DMA
  c8 00 80 e7 d0 40 e5 00      00:04:38.976  READ DMA

Error 8 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 6f 25 66 e2  Error: ICRC, ABRT at LBA = 0x0266256f = 40248687

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 78 6f 25 66 e2 00      00:08:11.392  READ DMA
  c8 00 80 ef 24 66 e2 00      00:08:11.392  READ DMA
  c8 00 08 e7 24 66 e2 00      00:08:11.392  READ DMA
  c8 00 08 e7 24 66 e2 00      00:08:11.376  READ DMA
  c8 00 08 3f 84 c7 e7 00      00:08:11.360  READ DMA

Error 7 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 6f 25 66 e2  Error: ICRC, ABRT at LBA = 0x0266256f = 40248687

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 78 6f 25 66 e2 00      00:32:26.304  READ DMA
  c8 00 80 ef 24 66 e2 00      00:32:26.304  READ DMA
  c8 00 08 e7 24 66 e2 00      00:32:26.304  READ DMA
  ca 00 08 47 00 5e e0 00      00:32:26.288  WRITE DMA
  ca 00 38 5f 98 5f e0 00      00:32:26.288  WRITE DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       10%     51697         129914729
# 2  Short offline       Completed without error       00%     51697         -
# 3  Short offline       Completed without error       00%     51697         -
# 4  Short offline       Completed without error       00%     51697         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Dernière modification par Deux (Le 25/04/2017, à 15:04)

Hors ligne

#6 Le 25/04/2017, à 16:14

tarkan99

Re : connexion xubuntu impossible

on voit des erreurs, mais je laisse un expert indiquer la gravité de la situation.


xubuntu 16.04.1 sur HP probook 6560b et sur vieux Core 2 duo
lubuntu 16.04.2 sur Samsung NC10

Hors ligne