#1 Le 01/07/2017, à 03:56
- tokinstit
[Résolu] démarrage et choix du noyau
Bonjour,
Tout d'abord je présente mes excuses si la question a déjà été traitée mais je n'ai pas trouvé la réponse.
Mon PC est installé avec un dual-boot Xubuntu 16.04.2 LTS et Windows 10 (préinstallé) en UEFI.
Depuis une mise à jour du noyau en 4.8, j'ai un petit problème, pas méchant mais qui m'embête...
Lors du démarrage Grub me donne bien le choix.
Si je laisse l'ordi booter avec l'option par défaut (sur le noyau 4.8) cela ne se lance pas.
Si je rentre dans le menu Ubuntu et que je choisis le noyau 4.4, je n'ai pas de problème.
Si je choisis Win 10 aucun problème non plus.
J'ai effectué les opérations sans succès:
sudo os-prober
sudo update-grub
sudo grub-install /dev/sda
Auriez-vous une idée ?
D'avance merci,
Dernière modification par tokinstit (Le 03/07/2017, à 12:53)
Hors ligne
#2 Le 01/07/2017, à 07:26
- malbo
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Je souhaiterais en voir un peu plus. Pour cela, je te prie de démarrer une session en choisissant le noyau 4.4 et depuis cette session, faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Dernière modification par malbo (Le 01/07/2017, à 07:27)
Hors ligne
#3 Le 01/07/2017, à 09:49
- Bougron
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Fais aussi un rapport bisnext qui montre mieux l'état du logiciel en cours de mise à jour.
Tentes aussi le mode avancé et choisis le dernier noyau en mode recovery, Si cela boote, c'est un problème nomodeset.
Dernière modification par Bougron (Le 01/07/2017, à 09:50)
Hors ligne
#4 Le 01/07/2017, à 12:23
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Merci pour la réponse. Voilà le lien de boot-info : http://paste2.org/
Je regarde comment faire bisnext et je reviens vers vous.
Hors ligne
#5 Le 01/07/2017, à 12:27
- tokinstit
Re : [Résolu] démarrage et choix du noyau
re-bonjour,
Voilà le rapport bisnext : https://paste.debian.net/974222/
Je regarde pour le mode avancé.
Hors ligne
#6 Le 01/07/2017, à 12:58
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Alors pour le mode recovery, j'accède bien à un nouveau menu mais quand je sélectionne "resume", le redémarrage reprend en affichant des information précédées de [OK].
Mais cela s'arrête à chaque fois après :
[OK] Started Update UTMP about System Runlevel Changes
Je ne sais pas si cela aide...
Hors ligne
#7 Le 01/07/2017, à 13:02
- Bougron
Re : [Résolu] démarrage et choix du noyau
Bonjour
Je ne suis pas expert en carte graphique, je n'ai rien vu d'anormal dans la mise à jour
Cependant, au vu de ta description, je suis tenté de te proposer une modification dans le fichier /etc/default/grub
____________________________ sda5/etc/default/grub: ____________________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
Mets
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash modprobe.blacklist=nouveau"
puis
sudo update-grub
et rebootes
car il y a un petit message que je ne sais pas interpréter
[ 2.145144] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
Dernière modification par Bougron (Le 01/07/2017, à 13:07)
Hors ligne
#8 Le 01/07/2017, à 18:56
- malbo
Re : [Résolu] démarrage et choix du noyau
Je ne sais pas pourquoi tu as donné un lien tronqué pour ton Boot-Info dans le post #4. Je ne peux rien faire avec ça. Je te prie de passer la commande suivante dans un terminal :
cat /boot/grub/grub.cfg
Puis d'en donner le retour complet (voir définition ici) dans ta réponse
EDIT : puisqu'on n'a que ça pour l'instant, je colle ci-dessous ton rapport Bisnext ( https://paste.debian.net/974222/ ) :
Posting 974222 from bn-2d454 posted at 2017-07-01 10:25:14 expires: 2017-07-31 10:25:14
Jul 1, 2017, bisnext report id 2d454
bisnext 0.05
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-83-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop System: Thirdwave Diginnos product: MH
Mobo: ASUSTeK model: PRIME H270-PLUS v: Rev X.0x
UEFI: American Megatrends v: 0609 date: 03/23/2017
Chassis: Default string type: 3 v: Default string
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-7500 (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27263
clock speeds: min/max: 800/3800 MHz 1: 2354 MHz 2: 870 MHz
3: 2390 MHz 4: 814 MHz
Memory: Array-1 capacity: 64 GB devices: 4 EC: None
Device-1: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-2: ChannelA-DIMM2 size: 4 GB speed: 2400 MHz type: DDR4
manufacturer: SK Hynix part: HMA851U6AFR6N-UH
Device-3: ChannelB-DIMM1 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM2 size: 4 GB speed: 2400 MHz type: DDR4
manufacturer: SK Hynix part: HMA851U6AFR6N-UH
Graphics: Card: NVIDIA Device 1c82 bus-ID: 01:00.0 chip-ID: 10de:1c82
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: modesetting)
Resolution: 1920x1080@60.00hz
OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2
version: 4.5.0 NVIDIA 375.66 Direct Render: Yes
Audio: Card-1 Intel Device a2f0
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a2f0
Card-2 NVIDIA Device 0fb9
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0fb9
Sound: Advanced Linux Sound Architecture v: k4.4.0-83-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 04:00.0 chip-ID: 10ec:8168
IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1250.3GB (1.5% used)
ID-1: /dev/sda model: Samsung_SSD_750 size: 250.1GB
temp: 0C
ID-2: /dev/sdb model: TOSHIBA_DT01ACA1 size: 1000.2GB
temp: 31C
Optical-1: /dev/sr0 model: HL-DT-ST DVDRAM GH24NSD1
rev: LG00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 12x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 42G used: 9.5G (25%) fs: ext4 dev: /dev/sda5
label: N/A uuid: f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
ID-2: /boot/efi size: 96M used: 39M (41%) fs: vfat dev: /dev/sda1
label: SYSTEM uuid: 7861-95A2
ID-3: swap-1 size: 8.53GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
label: N/A uuid: d6f30072-3eb7-4aeb-8d7c-a3730cb5ae85
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda2 size: 0.02G label: N/A uuid: N/A
ID-2: /dev/sda3 size: 195.78G
fs: NTFS label: Windows uuid: 921E629E1E627B5D
ID-3: /dev/sda4 size: 0.47G
fs: NTFS label: N/A uuid: 92D2B0ADD2B09747
ID-4: /dev/sdb1 size: 1000.20G
fs: NTFS label: N/A uuid: 08905B29905B1C8E
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:29C
Fan Speeds (in rpm): cpu: 0
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://jp.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://jp.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://jp.archive.ubuntu.com/ubuntu/ xenial universe
deb http://jp.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://jp.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://jp.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://jp.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
deb https://dl.winehq.org/wine-builds/ubuntu/ xenial main
Active apt sources in file: /etc/apt/sources.list.d/cairo-dock-team-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/cairo-dock-team/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/kdenlive-ubuntu-kdenlive-stable-xenial.list
deb http://ppa.launchpad.net/kdenlive/kdenlive-stable/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/libreoffice-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/libreoffice/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/team-xbmc-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/team-xbmc/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 7.2% command: firefox pid: 2045 mem: 369.61MB (4.6%)
2: cpu: 3.5% command: Xorg pid: 1115 mem: 73.55MB (0.9%)
3: cpu: 1.6% command: bash pid: 15319 mem: 4.44MB (0.0%)
4: cpu: 0.4% command: cairo-dock pid: 3879 mem: 97.28MB (1.2%)
5: cpu: 0.4% command: xfwm4 pid: 1835 mem: 23.31MB (0.2%)
6: cpu: 0.2% command: xfce4-terminal pid: 15281 mem: 24.78MB (0.3%)
7: cpu: 0.2% command: freshclam pid: 816 mem: 18.20MB (0.2%)
8: cpu: 0.2% command: init pid: 1 mem: 5.96MB (0.0%)
9: cpu: 0.1% command: sh pid: 1845 mem: 0.70MB (0.0%)
10: cpu: 0.1% command: xfdesktop pid: 1844 mem: 48.49MB (0.6%)
Info: Processes: 205 Uptime: 8 min Memory: 740.4/7930.0MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.23
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0000,0001,0003,0004
Boot0000* Windows Boot Manager HD(1,GPT,1cb83af3-9436-4897-b826-ba77042c201b,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...9................
Boot0001* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0002* ubuntu HD(1,GPT,1cb83af3-9436-4897-b826-ba77042c201b,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)
Boot0003* UEFI:Removable Device BBS(130,,0x0)
Boot0004* UEFI:Network Device BBS(131,,0x0)
vfat partition details:
/dev/sda1: LABEL="SYSTEM" UUID="7861-95A2" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="1cb83af3-9436-4897-b826-ba77042c201b"
Secure Boot active
EFI files in /dev/sda1:
11e8569e8661e65bb7f6460a41a3b8a2 /EFI/ubuntu/grubx64.efi
1650105fea8c992858d224d8f546b3d2 /EFI/Microsoft/Boot/memtest.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/Boot/bootx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
7e5846c5c982a2037ae885d96f1163d3 /boot-sav/log/2017-05-21__17h22boot-repair11/sda1/bootx64.efi
7e5846c5c982a2037ae885d96f1163d3 /boot-sav/log/2017-06-25__09h48boot-repair42/sda1/bootx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Boot/bkpbootx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Microsoft/Boot/bootmgfw.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
e46ce79ec4662e061924f9a9e31ab4c3 /EFI/Microsoft/Boot/bootmgr.efi
__________________________________ OS prober ________________________________
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/boot-sav/log/2017-05-21__17h22boot-repair11/sda1/bootx
64.efi
/boot-sav/log/2017-06-25__09h48boot-repair42/sda1/bootx
64.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 232,9 GiB, 250059350016 octets, 488397168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 206,847 204,800 EFI System partition
/dev/sda2 206,848 239,615 32,768 Microsoft Reserved Partition (Windows)
/dev/sda3 239,616 382,617,599 382,377,984 Data partition (Windows/Linux)
/dev/sda4 R 487,475,200 488,396,799 921,600 Windows Recovery Environment (Windows)
/dev/sda5 382,617,600 470,808,575 88,190,976 Data partition (Linux)
/dev/sda6 470,808,576 487,475,199 16,666,624 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sdb1 ends after the last sector of /dev/sdb
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 7861-95A2 vfat SYSTEM
/dev/sda2
/dev/sda3 921E629E1E627B5D ntfs Windows
/dev/sda4 92D2B0ADD2B09747 ntfs
/dev/sda5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ext4
/dev/sda6 d6f30072-3eb7-4aeb-8d7c-a3730cb5ae85 swap
/dev/sdb1 08905B29905B1C8E ntfs
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juil. 1 19:16 ata-HL-DT-ST_DVDRAM_GH24NSD1_K82H2M92824 -> ../../sr0
lrwxrwxrwx 1 root root 9 juil. 1 19:20 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L -> ../../sda
lrwxrwxrwx 1 root root 10 juil. 1 19:20 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juil. 1 19:20 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juil. 1 19:21 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 juil. 1 19:21 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 juil. 1 19:20 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 juil. 1 19:20 ata-Samsung_SSD_750_EVO_250GB_S3CKNB0HC17779L-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 juil. 1 19:20 ata-TOSHIBA_DT01ACA100_275PUR0NS -> ../../sdb
lrwxrwxrwx 1 root root 10 juil. 1 19:21 ata-TOSHIBA_DT01ACA100_275PUR0NS-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 juil. 1 19:20 wwn-0x5000039fede61b50 -> ../../sdb
lrwxrwxrwx 1 root root 10 juil. 1 19:21 wwn-0x5000039fede61b50-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 juil. 1 19:16 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 juil. 1 19:20 wwn-0x5002538d418de8b3 -> ../../sda
lrwxrwxrwx 1 root root 10 juil. 1 19:20 wwn-0x5002538d418de8b3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juil. 1 19:20 wwn-0x5002538d418de8b3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juil. 1 19:21 wwn-0x5002538d418de8b3-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 juil. 1 19:21 wwn-0x5002538d418de8b3-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 juil. 1 19:20 wwn-0x5002538d418de8b3-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 juil. 1 19:20 wwn-0x5002538d418de8b3-part6 -> ../../sda6
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
_________________________=== Boot Files Contents ===___________________________
__________________________ sda1/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 root hd0,gpt5
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sda5/boot/grub/grub.cfg: ___________________________
File size: 17382, Line count: 443, Menu entries (sub entries included) : 19
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file contents from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-7861-95A2' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 7861-95A2
else
search --no-floppy --fs-uuid --set=root 7861-95A2
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda5/etc/fstab: ________________________________
UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 / ext4 errors=remount-ro 0 1
UUID=d6f30072-3eb7-4aeb-8d7c-a3730cb5ae85 none swap sw 0 0
UUID=7861-95A2 /boot/efi vfat defaults 0 1
____________________________ sda5/etc/default/grub: ____________________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-83-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 7.583s (firmware) + 14.106s (loader) + 1.691s (kernel) + 2.882s (userspace) = 26.264s
blame, first 10:
apt-daily.service 1.767s
dev-sda5.device 863ms
networking.service 855ms
console-setup.service 229ms
ModemManager.service 179ms
accounts-daemon.service 177ms
systemd-logind.service 114ms
grub-common.service 113ms
ufw.service 112ms
thermald.service 112ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 655M 5.8G 35M 1.3G 6.8G
Swap: 7.9G 0B 7.9G
Swappiness = 0
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 96M 39M 58M 41% -
/dev/sda5 / ext4 42G 9.5G 30G 25% 13%
Swap partition for hibernation : UUID=d6f30072-3eb7-4aeb-8d7c-a3730cb5ae85
_______________________________ Wireless Status _______________________________
None
_______________________________ Modules Loaded _______________________________
Excerpt:
drm 364544 6 i915_bpo,drm_kms_helper,nvidia_drm
drm_kms_helper 155648 2 i915_bpo,nvidia_drm
i2c_algo_bit 16384 1 i915_bpo
i915_bpo 1306624 0
intel_ips 20480 1 i915_bpo
nvidia 12312576 69 nvidia_modeset,nvidia_uvm
nvidia_drm 53248 2
nvidia_modeset 790528 4 nvidia_drm
nvidia_uvm 647168 0
video 40960 2 i915_bpo,asus_wmi
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001C82sv000010DEsd00001C82bc03sc00i00
vendor : NVIDIA Corporation
driver : nvidia-375 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
kodi 2:17.1~git20170320.2031-final-0xenial
libbonobo2-0:amd64 2.32.1-3
libbonobo2-common 2.32.1-3
libgnome2-common 2.32.1-5ubuntu1
linux-image-4.4.0-72-generic 4.4.0-72.93
linux-image-4.4.0-75-generic 4.4.0-75.96
linux-image-4.4.0-77-generic 4.4.0-77.98
linux-image-4.4.0-78-generic 4.4.0-78.99
linux-image-4.4.0-79-generic 4.4.0-79.100
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-4.8.0-53-generic 4.8.0-53.56~16.04.1
linux-image-4.8.0-54-generic 4.8.0-54.57~16.04.1
linux-image-extra-4.4.0-72-generic 4.4.0-72.93
linux-image-extra-4.4.0-75-generic 4.4.0-75.96
linux-image-extra-4.4.0-77-generic 4.4.0-77.98
linux-image-extra-4.4.0-78-generic 4.4.0-78.99
linux-image-extra-4.4.0-79-generic 4.4.0-79.100
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-image-extra-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-extra-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-extra-4.8.0-53-generic 4.8.0-53.56~16.04.1
linux-image-extra-4.8.0-54-generic 4.8.0-54.57~16.04.1
linux-signed-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-signed-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-signed-image-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-signed-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-signed-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-signed-image-4.8.0-53-generic 4.8.0-53.56~16.04.1
linux-signed-image-4.8.0-54-generic 4.8.0-54.57~16.04.1
pidgin 1:2.10.12-0ubuntu5.2
snap-confine 2.24.1
xserver-xorg-core-hwe-16.04 2:1.18.4-1ubuntu6.1~16.04.1
xserver-xorg-hwe-16.04 1:7.7+13ubuntu4~16.04.2
xserver-xorg-video-intel-hwe-16.04 2:2.99.917+git20160706-1ubuntu1~16.04.1
xserver-xorg-video-vmware-hwe-16.04 1:13.1.0-2ubuntu3~16.04.1
Use the following command to clean old configuration files:
sudo apt purge kodi libbonobo2-0:amd64 libbonobo2-common libgnome2-common linux-image-4.4.0-72-generic linux-image-4.4.0-75-generic linux-image-4.4.0-77-generic linux-image-4.4.0-78-generic linux-image-4.4.0-79-generic linux-image-4.8.0-36-generic linux-image-4.8.0-46-generic linux-image-4.8.0-49-generic linux-image-4.8.0-51-generic linux-image-4.8.0-52-generic linux-image-4.8.0-53-generic linux-image-4.8.0-54-generic linux-image-extra-4.4.0-72-generic linux-image-extra-4.4.0-75-generic linux-image-extra-4.4.0-77-generic linux-image-extra-4.4.0-78-generic linux-image-extra-4.4.0-79-generic linux-image-extra-4.8.0-36-generic linux-image-extra-4.8.0-46-generic linux-image-extra-4.8.0-49-generic linux-image-extra-4.8.0-51-generic linux-image-extra-4.8.0-52-generic linux-image-extra-4.8.0-53-generic linux-image-extra-4.8.0-54-generic linux-signed-image-4.8.0-36-generic linux-signed-image-4.8.0-46-generic linux-signed-image-4.8.0-49-generic linux-signed-image-4.8.0-51-generic linux-signed-image-4.8.0-52-generic linux-signed-image-4.8.0-53-generic linux-signed-image-4.8.0-54-generic pidgin snap-confine xserver-xorg-core-hwe-16.04 xserver-xorg-hwe-16.04 xserver-xorg-video-intel-hwe-16.04 xserver-xorg-video-vmware-hwe-16.04
_________________________ Kernel Packages Installed __________________________
Package Version Status
linux-generic 4.4.0.83.89 [installed]
linux-generic-hwe-16.04 4.8.0.58.29 [installed]
linux-headers-4.4.0-81 4.4.0-81.104 [installed,automatic]
linux-headers-4.4.0-81-generic 4.4.0-81.104 [installed,automatic]
linux-headers-4.4.0-83 4.4.0-83.106 [installed,automatic]
linux-headers-4.4.0-83-generic 4.4.0-83.106 [installed,automatic]
linux-headers-4.8.0-56 4.8.0-56.61~16.04.1 [installed,automatic]
linux-headers-4.8.0-56-generic 4.8.0-56.61~16.04.1 [installed,automatic]
linux-headers-4.8.0-58 4.8.0-58.63~16.04.1 [installed,automatic]
linux-headers-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-headers-generic 4.4.0.83.89 [installed,automatic]
linux-headers-generic-hwe-16.04 4.8.0.58.29 [installed,automatic]
linux-hwe-edge-tools-4.10.0-26 4.10.0-26.30~16.04.1 [installed,automatic]
linux-image-4.4.0-81-generic 4.4.0-81.104 [installed,automatic]
linux-image-4.4.0-83-generic 4.4.0-83.106 [installed,automatic]
linux-image-4.8.0-56-generic 4.8.0-56.61~16.04.1 [installed,automatic]
linux-image-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-image-extra-4.4.0-81-generic 4.4.0-81.104 [installed,automatic]
linux-image-extra-4.4.0-83-generic 4.4.0-83.106 [installed,automatic]
linux-image-extra-4.8.0-56-generic 4.8.0-56.61~16.04.1 [installed,automatic]
linux-image-extra-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-image-generic 4.4.0.83.89 [installed,automatic]
linux-image-generic-hwe-16.04 4.8.0.58.29 [installed,automatic]
linux-signed-generic-hwe-16.04 4.8.0.58.29 [installed]
linux-signed-image-4.8.0-56-generic 4.8.0-56.61~16.04.1 [installed,automatic]
linux-signed-image-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-signed-image-generic-hwe-16.04 4.8.0.58.29 [installed,automatic]
linux-tools-4.10.0-26-generic 4.10.0-26.30~16.04.1 [installed,automatic]
linux-tools-common 4.4.0-83.106 [installed,automatic]
linux-tools-virtual-hwe-16.04-edge 4.10.0.26.19 [installed,automatic]
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.150258] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.157301] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.172668] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.890468] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.978798] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 2.034290] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 2.145144] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.023] (--) PCI:*(0:1:0:0) 10de:1c82:10de:1c82 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.086] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.086] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.086] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.086] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.086] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.086] (EE) Failed to load module "vesa" (module does not exist, 0)
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-83-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-83-generic/updates/dkms
Found nvidia module: nvidia_375.ko
Is nvidia loaded? yes
Is intel loaded? yes
Is nouveau blacklisted? yes
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:1c82
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
last cards number = 1
Has nvidia? yes
How many cards? 1
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is nvidia available? yes
Is mesa available? yes
Is mesa egl available? yes
Is prime available? yes
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
Nvidia packages and kernel modules:
nvidia-375 375.66-0ubuntu0.16.04.1
nvidia-opencl-icd-375 375.66-0ubuntu0.16.04.1
nvidia-prime 0.8.2
nvidia-settings 361.42-0ubuntu1
bbswitch-dkms 0.8-3ubuntu1
Jun 14 21:26 /lib/modules/4.4.0-81-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 29 20:22 /lib/modules/4.4.0-81-generic/updates/dkms/nvidia_375.ko
Jun 29 20:22 /lib/modules/4.4.0-81-generic/updates/dkms/nvidia_375_drm.ko
Jun 29 20:22 /lib/modules/4.4.0-81-generic/updates/dkms/nvidia_375_modeset.ko
Jun 29 20:22 /lib/modules/4.4.0-81-generic/updates/dkms/nvidia_375_uvm.ko
Jun 27 04:46 /lib/modules/4.4.0-83-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 30 20:51 /lib/modules/4.4.0-83-generic/updates/dkms/nvidia_375.ko
Jun 30 20:51 /lib/modules/4.4.0-83-generic/updates/dkms/nvidia_375_drm.ko
Jun 30 20:51 /lib/modules/4.4.0-83-generic/updates/dkms/nvidia_375_modeset.ko
Jun 30 20:51 /lib/modules/4.4.0-83-generic/updates/dkms/nvidia_375_uvm.ko
Jun 15 00:28 /lib/modules/4.8.0-56-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 29 20:24 /lib/modules/4.8.0-56-generic/updates/dkms/nvidia_375.ko
Jun 29 20:24 /lib/modules/4.8.0-56-generic/updates/dkms/nvidia_375_drm.ko
Jun 29 20:24 /lib/modules/4.8.0-56-generic/updates/dkms/nvidia_375_modeset.ko
Jun 29 20:24 /lib/modules/4.8.0-56-generic/updates/dkms/nvidia_375_uvm.ko
Jun 27 06:45 /lib/modules/4.8.0-58-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 30 20:53 /lib/modules/4.8.0-58-generic/updates/dkms/nvidia_375.ko
Jun 30 20:53 /lib/modules/4.8.0-58-generic/updates/dkms/nvidia_375_drm.ko
Jun 30 20:53 /lib/modules/4.8.0-58-generic/updates/dkms/nvidia_375_modeset.ko
Jun 30 20:53 /lib/modules/4.8.0-58-generic/updates/dkms/nvidia_375_uvm.ko
Jun 2 15:12 /lib/nvidia-375
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-83-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 750 EVO 250GB
LU WWN Device Id: 5 002538 d418de8b3
Firmware Version: MAT01B6Q
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 1 19:25:10 2017 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--CK 099 099 000 - 511
12 Power_Cycle_Count -O--CK 099 099 000 - 146
177 Wear_Leveling_Count PO--C- 099 099 000 - 2
190 Airflow_Temperature_Cel -O--CK 070 059 000 - 30
235 Unknown_Attribute -O--C- 099 099 000 - 16
241 Total_LBAs_Written -O--CK 099 099 000 - 1156442761
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-83-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA100
LU WWN Device Id: 5 000039 fede61b50
Firmware Version: MS2OA750
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 1 19:25:10 2017 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
2 Throughput_Performance P-S--- 142 142 054 - 69
3 Spin_Up_Time POS--- 127 127 024 - 180 (Average 180)
4 Start_Stop_Count -O--C- 100 100 000 - 307
8 Seek_Time_Performance P-S--- 113 113 020 - 35
9 Power_On_Hours -O--C- 100 100 000 - 511
12 Power_Cycle_Count -O--CK 100 100 000 - 145
192 Power-Off_Retract_Count -O--CK 100 100 000 - 492
193 Load_Cycle_Count -O--C- 100 100 000 - 492
194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 19/37)
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
Dernière modification par malbo (Le 02/07/2017, à 05:59)
Hors ligne
#9 Le 02/07/2017, à 00:47
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Désolé malbo, mais c'était le lien que m'a renvoyé le programme. Je n'ai pas vérifié ce qu'il contenait.
Bougron, j'ai du faire une erreur dans la manip que tu m'as indiquée car désormais, ça ne démarre plus du tout.
J'ai juste un message grub : minimal bash avec une invite Grub > et les commandes possibles.
Je pense que c'est juste le fichier /etc/default/grub qui est abimé, car en changeant l'ordre du boot dans le bios je peux démarrer sans pb sur Win10.
Hors ligne
#10 Le 02/07/2017, à 00:50
- Bougron
Re : [Résolu] démarrage et choix du noyau
Je suis désolé. refais une rapport bisnext
Hors ligne
#11 Le 02/07/2017, à 03:56
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Ne sois pas désolé. C'est moi qui ai du me tromper !
Mon problème pour l'instant est d'arriver à booter sur Xubuntu. Je n'y arrive pas à partir du "minimal bash" de Grub.
Pour l'instant je vais essayer de voir à partir d'un live USB...
Hors ligne
#12 Le 02/07/2017, à 11:10
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour,
J'ai réussi à remettre Grub comme avant à partir d'un live usb, j'ai donc de nouveau mon xubuntu avec noyau 4.4 qui marche !
malbo, j'espère que c'est bien ce qu'il fallait faire ci-dessous.
Merci encore pour votre aide.
murieljf@murieljf-pc-chambre:~$ cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
menuentry 'Ubuntu, avec Linux 4.8.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-init-upstart-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-56-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-56-generic-advanced-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-56-generic…'
linux /boot/vmlinuz-4.8.0-56-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-56-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-56-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-56-generic-init-upstart-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-56-generic…'
linux /boot/vmlinuz-4.8.0-56-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-56-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-56-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-56-generic-recovery-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.8.0-56-generic…'
linux /boot/vmlinuz-4.8.0-56-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-56-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-83-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-advanced-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-init-upstart-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-recovery-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-81-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-81-generic-advanced-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-81-generic…'
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-81-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-81-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-81-generic-init-upstart-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-81-generic…'
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-81-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-81-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-81-generic-recovery-f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
else
search --no-floppy --fs-uuid --set=root f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75
fi
echo 'Chargement de Linux 4.4.0-81-generic…'
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-81-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 7861-95A2
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-7861-95A2' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 7861-95A2
else
search --no-floppy --fs-uuid --set=root 7861-95A2
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
murieljf@murieljf-pc-chambre:~$
Hors ligne
#13 Le 02/07/2017, à 11:48
- malbo
Re : [Résolu] démarrage et choix du noyau
C'est parfait. On voit que dans les options avancées du menu Grub, tu as la possibilité de démarrer sur le noyau 4.8.0-56 (c'est l'avant-dernier noyau puisque le dernier est le noyau 4.8.0-58). Peux-tu essayer de démarrer sur cet avant-dernier noyau ?
Hors ligne
#14 Le 02/07/2017, à 13:48
- tokinstit
Re : [Résolu] démarrage et choix du noyau
J'ai essayé le noyau 4.8.0-56 : sans succès en mode normal comme recovery...
C'est dommage de ne pas pouvoir utiliser ce noyau, mais je peux quand même fonctionner;
Hors ligne
#15 Le 02/07/2017, à 13:51
- Bougron
Re : [Résolu] démarrage et choix du noyau
Bonjour
As-tu installé l'option que je t'ai proposée. (échange N°7)
Hors ligne
#16 Le 02/07/2017, à 14:10
- tokinstit
Re : [Résolu] démarrage et choix du noyau
je remarque ceci :
4.8.0-58
linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
4.8.0-56
linux /boot/vmlinuz-4.8.0-56-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
en 4.4.0-81
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
est-ce que ce ".efi.signed" serait la cause pour laquelle le noyau 4.8 ne boote pas ?
Hors ligne
#17 Le 02/07/2017, à 14:28
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour Bougron,
Oui, j'ai bien effectué la modification. cela ne change pas grand chose. Juste un écran de type "terminal" avec 2 lignes qui n'apparait plus.
Puis toujours pareil : l'écran d'accueil de Xubuntu apparait 1 sec avant de revenir à un écran de type "terminal" avec le message :
/dev/sda5 : clean, 358675/2760704 files, 2690614/11023872 blocks
J'ai toujours cette dernière ligne avec le noyau 4.8
Hors ligne
#18 Le 02/07/2017, à 17:07
- Bougron
Re : [Résolu] démarrage et choix du noyau
je remarque ceci :
4.8.0-58linux /boot/vmlinuz-4.8.0-58-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff init=/sbin/upstart
4.8.0-56
linux /boot/vmlinuz-4.8.0-56-generic.efi.signed root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
en 4.4.0-81
linux /boot/vmlinuz-4.4.0-81-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau $vt_handoff
est-ce que ce ".efi.signed" serait la cause pour laquelle le noyau 4.8 ne boote pas ?
Tu me fais découvrir cette bizarrerie.
Je suis aussi surpris que toi de cette anomalie. Pour moi il ne devrait pas y avoir de panachage. Je suis en version 16.04.2 et mon fichier de boot contient
linux /boot/vmlinuz-4.4.0-83-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-83-generic
Peux-tu déactiver le sécure boot pour voir... J'ai vu une discussion de laurent85 disant que les pilotes propriétaires ne pouvaient pas travailler en mode secure.....
et tu peux aussi faire un essai en remplaçant /boot/vmlinuz-4.8.0-58-generic.efi.signed par /boot/vmlinuz-4.8.0-58-generic Le module est bien présent.
Dernière modification par Bougron (Le 02/07/2017, à 17:16)
Hors ligne
#19 Le 02/07/2017, à 19:08
- malbo
Re : [Résolu] démarrage et choix du noyau
Extrait de ton Bisnext que j'ai collé dans le post #8 (c'est dans la partie "Configuration files of uninstalled packages") :
linux-signed-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-signed-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-signed-image-4.8.0-49-generic 4.8.0-49.52~16.04.1
linux-signed-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-signed-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-signed-image-4.8.0-53-generic 4.8.0-53.56~16.04.1
linux-signed-image-4.8.0-54-generic 4.8.0-54.57~16.04.1
Cela signifie que tu as eu tous ces noyaux de la famille "4.8" qui ont été installés auparavant. Faut-il comprendre que tu n'as jamais pu démarrer sur un noyau de cette famille "4.8" ?
Hors ligne
#20 Le 03/07/2017, à 12:53
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour
@malbo : effectivement je n'avais jamais réussi à démarrer avec un noyau 4.8 mais c'est désormais chose faite !
Linux murieljf-pc-chambre 4.8.0-58-generic #63~16.04.1-Ubuntu SMP Mon Jun 26 18:08:51 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
J'ai utilisé la 2eme proposition de Bougron en remplaçant /boot/vmlinuz-4.8.0-58-generic.efi.signed par /boot/vmlinuz-4.8.0-58-generic.
J'ai préféré ne pas désactivé le Secure Boot pour éviter d'avoir un pb avec win après... (on ne sait jamis comment ça réagit ces bêtes-là !).
Encore merci pour votre aide et vos conseils tous les deux.
Je passe la discussion en [Résolu].
Hors ligne
#21 Le 03/07/2017, à 13:03
- Bougron
Re : [Résolu] démarrage et choix du noyau
Bonjour.
C'est une logique qui me dépasse.
Je suis content pour toi que cette proposition ait abouti. Mais c'est quand même une proposition "stupide".
Lorsque le secure est activé, les modules non secure devraient planter et les modules secure devraient fonctionner.
Heureusement que malbo a un énorme potentiel de recherche. Il risque de découvrir que le contenu des fichiers est l'inverse de leur nom dans cette fichue version.
Hors ligne
#22 Le 04/07/2017, à 08:20
- malbo
Re : [Résolu] démarrage et choix du noyau
Bonjour,
J'ai du mal à comprendre. Je te prie de passer la commande suivante dans un terminal :
dpkg -l|grep grub
Et donner dans ta réponse le retour utilisable de cette commande
Hors ligne
#23 Le 04/07/2017, à 08:43
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Voilà malbo :
murieljf@murieljf-pc-chambre:~$ dpkg -l|grep grub
ii grub-common 2.02~beta2-36ubuntu3.11 amd64 GRand Unified Bootloader (common files)
ii grub-efi-amd64 2.02~beta2-36ubuntu3.11 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 version)
ii grub-efi-amd64-bin 2.02~beta2-36ubuntu3.11 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 binaries)
ii grub-efi-amd64-signed 1.66.11+2.02~beta2-36ubuntu3.11 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 version, signed)
ii grub2-common 2.02~beta2-36ubuntu3.11 amd64 GRand Unified Bootloader (common files for version 2)
murieljf@murieljf-pc-chambre:~$
J'espère que cela aidera.
Hors ligne
#24 Le 05/07/2017, à 10:17
- malbo
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Mon "énorme potentiel de recherche" (dixit Bougron dans le post #21) ne me parait pas si énorme que ça finalement. Ton cas est vraiment bizarre et je ne trouve toujours pas. Depuis une session démarrée sur ton noyau 4.8, je te prie de passer la commande suivante dans un terminal :
cat /proc/cmdline
Et donner le retour utilisable de cette commande dans ta réponse.
Dernière modification par malbo (Le 05/07/2017, à 10:18)
Hors ligne
#25 Le 29/08/2017, à 10:43
- tokinstit
Re : [Résolu] démarrage et choix du noyau
Bonjour,
Désolé de ne répondre que si tard mais j'étais en vacances très loin de ce PC. Du coup je ne sais pas si ce fil est encore suivi...
Comme il y a eu un changement, je suis sur un noyau 4.10 désormais.
A noter que j'ai du refaire la procédure pour ce nouveau noyau car après la mise à jour j'avais de nouveau le pb de boot sur la 4.8 et la 4.10 mais pas sur la 4.4...
Voici la réponse de cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=f8bfdf89-2fb8-4f72-a1c1-65fcaf858d75 ro quiet splash modprobe.blacklist=nouveau vt.handoff=7
merci et bonne rentrée
Hors ligne