#1 Le 27/08/2018, à 15:39
- f.vuilliomenet
[Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjours,
j'ai un problème de démarrage lent >2 minutes depuis la version 18.04.1
avec la version 16.04 le démarrage étais < 1minutes
Jusque ici j'ai toujours trouver les réponse a mes question a l'aide de google, mais la cela dépasse de loin mes compétence, car je suis un utilisateur basic d'ubuntu
Je poste ci-dessous systemd-analyze et dmesg
J'ai déjà essayer de tous réinstaller depuis 0 mais même problème
systemd-analyze:
Startup finished in 36.776s (kernel) + 2min 38.668s (userspace) = 3min 15.445s
graphical.target reached after 1min 3.423s in userspacesystemd-analyze blame
1min 6.421s fstrim.service
1min 1.467s apt-daily.service
50.526s apt-daily-upgrade.service
30.109s systemd-journal-flush.service
25.719s dev-mapper-ubuntu\x2d\x2dvg\x2droot.device
24.463s plymouth-quit-wait.service
23.445s ufw.service
18.340s apparmor.service
15.847s systemd-udevd.service
14.577s dev-loop11.device
14.179s fwupd.service
13.741s snap-libreoffice-76.mount
13.722s snap-libreoffice-80.mount
13.597s snap-core-4917.mount
13.549s dns-clean.service
13.139s dev-loop6.device
12.722s snap-gnome\x2dcharacters-101.mount
12.518s snap-gnome\x2d3\x2d26\x2d1604-62.mount
12.500s snap-ffmpeg-3.mount
12.436s snap-gimp-39.mount
12.407s snap-gtk\x2dcommon\x2dthemes-319.mount
12.371s console-setup.service
12.306s snap-gimp-38.mount
12.292s snap-xnviewmp-3.mount
12.267s snap-gnome\x2dcharacters-103.mount
12.139s snap-gimp-40.mount
12.111s snap-ffmpeg-13.mount
12.082s snap-gnome\x2dcalculator-178.mount
12.065s snap-libreoffice-79.mount
12.049s snap-gnome\x2dcalculator-199.mount
12.044s snap-gnome\x2dsystem\x2dmonitor-54.mount
12.001s snap-gnome\x2dlogs-40.mount
11.963s snap-ffmpeg-206.mount
11.840s snap-core-5145.mount
11.770s snap-gnome\x2dlogs-37.mount
11.757s snap-gnome\x2dlogs-34.mount
11.729s snap-gnome\x2d3\x2d26\x2d1604-64.mount
11.664s snap-gnome\x2d3\x2d26\x2d1604-70.mount
11.636s snap-core-4830.mount
11.607s snap-gnome\x2dsystem\x2dmonitor-51.mount
11.584s snap-gnome\x2dsystem\x2dmonitor-45.mount
8.025s tlp.service
7.715s NetworkManager-wait-online.service
7.510s plymouth-start.service
6.557s dev-loop27.device
6.333s dev-loop16.device
6.151s snapd.service
5.902s dev-loop28.device
5.833s dev-loop26.device
5.733s dev-loop25.device
5.712s dev-loop23.device
5.542s dev-loop20.device
5.350s dev-loop19.device
5.239s dev-loop17.device
5.138s udisks2.service
5.014s dev-loop24.device
4.930s dev-loop13.device
4.893s dev-loop21.device
4.705s dev-loop15.device
4.612s dev-loop14.device
4.244s NetworkManager.service
4.173s dev-loop12.device
3.964s dev-loop9.device
3.794s thermald.service
3.753s dev-loop22.device
3.587s dev-loop18.device
3.586s dev-loop10.device
3.492s ModemManager.service
3.339s accounts-daemon.service
3.196s dev-loop0.device
3.095s dev-loop3.device
3.075s networkd-dispatcher.service
3.004s dev-loop7.device
2.971s lvm2-monitor.service
2.913s dev-loop4.device
2.897s dev-loop5.device
2.895s dev-loop2.device
2.673s plymouth-read-write.service
2.640s dev-loop1.device
2.261s wpa_supplicant.service
2.256s colord.service
2.222s snap-gnome\x2dcharacters-117.mount
2.111s dev-loop8.device
2.098s keyboard-setup.service
1.839s snap-gnome\x2dcalculator-180.mount
1.797s apport.service
1.713s gpu-manager.service
1.548s systemd-tmpfiles-setup-dev.service
1.510s rsyslog.service
1.494s teamviewerd.service
1.307s gdm.service
1.270s packagekit.service
990ms bluetooth.service
929ms polkit.service
912ms networking.service
887ms setvtrgb.service
864ms systemd-remount-fs.service
824ms systemd-resolved.service
815ms dev-hugepages.mount
814ms dev-mqueue.mount
808ms lvm2-pvscan@8:1.service
801ms sys-kernel-debug.mount
714ms systemd-backlight@backlight:intel_backlight.service
655ms systemd-sysctl.service
609ms avahi-daemon.service
602ms bolt.service
594ms lm-sensors.service
593ms pppd-dns.service
585ms systemd-logind.service
573ms alsa-restore.service
503ms geoclue.service
500ms systemd-modules-load.service
481ms kmod-static-nodes.service
461ms systemd-tmpfiles-setup.service
444ms user@1000.service
409ms systemd-journald.service
349ms upower.service
310ms dev-mapper-ubuntu\x2d\x2dvg\x2dswap_1.swap
290ms systemd-random-seed.service
264ms sys-kernel-config.mount
263ms sys-fs-fuse-connections.mount
206ms systemd-timesyncd.service
163ms systemd-udev-trigger.service
156ms blk-availability.service
108ms grub-common.service
59ms systemd-update-utmp.service
55ms systemd-tmpfiles-clean.service
26ms snapd.seeded.service
25ms snapd.socket
23ms snap-skype-51.mount
18ms speech-dispatcher.service
8ms kerneloops.service
5ms systemd-update-utmp-runlevel.service
5ms ureadahead-stop.service
4ms rtkit-daemon.service
3ms systemd-user-sessions.service
3ms dev-loop29.devicedmesg
[ 0.000000] microcode: microcode updated early to revision 0x2a, date = 2018-01-18
[ 0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c98efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c98f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 14800M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x141b3f000, 0x141b3ffff] PGTABLE
[ 0.000000] BRK [0x141b40000, 0x141b40fff] PGTABLE
[ 0.000000] BRK [0x141b41000, 0x141b41fff] PGTABLE
[ 0.000000] BRK [0x141b42000, 0x141b42fff] PGTABLE
[ 0.000000] BRK [0x141b43000, 0x141b43fff] PGTABLE
[ 0.000000] BRK [0x141b44000, 0x141b44fff] PGTABLE
[ 0.000000] BRK [0x141b45000, 0x141b45fff] PGTABLE
[ 0.000000] BRK [0x141b46000, 0x141b46fff] PGTABLE
[ 0.000000] BRK [0x141b47000, 0x141b47fff] PGTABLE
[ 0.000000] BRK [0x141b48000, 0x141b48fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3124d000-0x3491dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFD0188 0000CC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF7A000 000040
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000096f79fff]
[ 0.000000] node 0: [mem 0x000000009787a000-0x000000009c98efff]
[ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[ 0.000000] On node 0 totalpages: 2076717
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9923 pages used for memmap
[ 0.000000] DMA32 zone: 635024 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c98f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044245
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8024712K/8306868K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 282156K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39121 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 39
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
[ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[ 0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2394.475 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.95 BogoMIPS (lpj=9577900)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028195] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028196] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028200] mce: CPU supports 7 MCE banks
[ 0.028218] process: using mwait in idle threads
[ 0.028221] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.028221] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.028223] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028224] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028224] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028225] Speculative Store Bypass: Vulnerable
[ 0.034486] Freeing SMP alternatives memory: 36K
[ 0.036061] TSC deadline timer enabled
[ 0.036063] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.036125] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.036167] ... version: 3
[ 0.036167] ... bit width: 48
[ 0.036168] ... generic registers: 4
[ 0.036169] ... value mask: 0000ffffffffffff
[ 0.036169] ... max period: 00007fffffffffff
[ 0.036170] ... fixed-purpose events: 3
[ 0.036170] ... event mask: 000000070000000f
[ 0.036202] Hierarchical SRCU implementation.
[ 0.037202] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.037214] smp: Bringing up secondary CPUs ...
[ 0.037284] x86: Booting SMP configuration:
[ 0.037285] .... node #0, CPUs: #1 #2 #3
[ 0.040568] smp: Brought up 1 node, 4 CPUs
[ 0.040568] smpboot: Max logical packages: 1
[ 0.040568] smpboot: Total of 4 processors activated (19155.80 BogoMIPS)
[ 0.044249] devtmpfs: initialized
[ 0.044249] x86/mm: Memory block size: 128MB
[ 0.044700] evm: security.selinux
[ 0.044700] evm: security.SMACK64
[ 0.044701] evm: security.SMACK64EXEC
[ 0.044701] evm: security.SMACK64TRANSMUTE
[ 0.044702] evm: security.SMACK64MMAP
[ 0.044702] evm: security.apparmor
[ 0.044703] evm: security.ima
[ 0.044703] evm: security.capability
[ 0.044716] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.044716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044716] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.044716] pinctrl core: initialized pinctrl subsystem
[ 0.044716] RTC time: 5:05:32, date: 08/27/18
[ 0.044716] NET: Registered protocol family 16
[ 0.044716] audit: initializing netlink subsys (disabled)
[ 0.044716] audit: type=2000 audit(1535346332.044:1): state=initialized audit_enabled=0 res=1
[ 0.044716] cpuidle: using governor ladder
[ 0.044716] cpuidle: using governor menu
[ 0.044716] Simple Boot Flag at 0x44 set to 0x1
[ 0.044716] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044716] ACPI: bus type PCI registered
[ 0.044716] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044716] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044716] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.044716] PCI: Using configuration type 1 for base access
[ 0.045196] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.045196] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045196] ACPI: Added _OSI(Module Device)
[ 0.045196] ACPI: Added _OSI(Processor Device)
[ 0.045196] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.045196] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045196] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.048013] ACPI: Executed 7 blocks of module-level executable AML code
[ 0.056030] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.057492] ACPI: Dynamic OEM Table Load:
[ 0.057500] ACPI: SSDT 0xFFFF9F42D4928C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.057714] ACPI: Dynamic OEM Table Load:
[ 0.057714] ACPI: SSDT 0xFFFF9F42D4E64800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
[ 0.060175] ACPI: Dynamic OEM Table Load:
[ 0.060182] ACPI: SSDT 0xFFFF9F42D48D6E00 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
[ 0.060943] ACPI: EC: EC started
[ 0.060943] ACPI: EC: interrupt blocked
[ 0.061490] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.061492] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.061494] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.061495] ACPI: Interpreter enabled
[ 0.061539] ACPI: (supports S0 S3 S4 S5)
[ 0.061540] ACPI: Using IOAPIC for interrupt routing
[ 0.061581] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.064049] ACPI: GPE 0x62 active on init
[ 0.064064] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.084497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.084504] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.085782] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.085784] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.086924] PCI host bridge to bus 0000:00
[ 0.086927] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.086928] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.086930] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.086931] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[ 0.086933] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.086942] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.087281] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.087293] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.087299] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.087304] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.087652] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.087662] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[ 0.088024] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.088043] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[ 0.088100] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.088421] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.088443] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[ 0.088510] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.088834] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.088853] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[ 0.088909] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.089225] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.089293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.089673] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[ 0.089743] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.090124] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.090193] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.090577] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.091767] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[ 0.095299] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.095626] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.096057] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.096072] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.096079] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.096085] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.096092] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.096099] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.096105] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[ 0.096140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.096454] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.096471] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[ 0.096489] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.096869] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.096942] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.096972] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.097000] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[ 0.097017] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[ 0.097118] pci 0000:02:00.0: supports D1 D2
[ 0.097119] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.108027] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.108030] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.108033] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.108300] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[ 0.108408] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[ 0.108796] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.120165] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.120170] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.121432] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.121516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.121592] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.121664] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.121736] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.121807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.121880] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.121952] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.122406] ACPI: EC: interrupt unblocked
[ 0.122414] ACPI: EC: event unblocked
[ 0.122431] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.122434] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.122639] SCSI subsystem initialized
[ 0.122665] libata version 3.00 loaded.
[ 0.122665] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.122665] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.122665] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.122665] vgaarb: loaded
[ 0.122665] ACPI: bus type USB registered
[ 0.122665] usbcore: registered new interface driver usbfs
[ 0.122665] usbcore: registered new interface driver hub
[ 0.122665] usbcore: registered new device driver usb
[ 0.122665] EDAC MC: Ver: 3.0.0
[ 0.122665] PCI: Using ACPI for IRQ routing
[ 0.124416] PCI: pci_cache_line_size set to 64 bytes
[ 0.124727] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.124728] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
[ 0.124729] e820: reserve RAM buffer [mem 0x9c98f000-0x9fffffff]
[ 0.124730] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.124731] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 0.128001] NetLabel: Initializing
[ 0.128001] NetLabel: domain hash size = 128
[ 0.128001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.128001] NetLabel: unlabeled traffic allowed by default
[ 0.128299] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.128305] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.130322] clocksource: Switched to clocksource hpet
[ 0.138465] VFS: Disk quotas dquot_6.6.0
[ 0.138481] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.138578] AppArmor: AppArmor Filesystem Enabled
[ 0.138607] pnp: PnP ACPI init
[ 0.139320] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.139322] system 00:00: [io 0xffff] has been reserved
[ 0.139324] system 00:00: [io 0xffff] has been reserved
[ 0.139325] system 00:00: [io 0xffff] has been reserved
[ 0.139327] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.139329] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.139334] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139394] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.139443] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.139447] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.139515] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.139572] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[ 0.139994] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.139996] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.139998] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.139999] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.140011] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.140013] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.140015] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.140016] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.140018] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.140020] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.140022] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[ 0.140023] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[ 0.140027] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.140381] pnp: PnP ACPI: found 6 devices
[ 0.146303] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.146314] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.146317] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.146319] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.146335] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[ 0.146339] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146342] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.146344] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146347] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.146351] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.146354] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146359] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.146361] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.146364] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.146371] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.146375] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.146382] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.146383] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.146385] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.146386] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[ 0.146388] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.146389] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[ 0.146391] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146392] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.146394] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[ 0.146395] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[ 0.146536] NET: Registered protocol family 2
[ 0.146736] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146853] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.147022] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.147055] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.147084] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.147139] NET: Registered protocol family 1
[ 0.147151] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.147249] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.147250] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.168269] PCI: CLS 64 bytes, default 64
[ 0.168306] Unpacking initramfs...
[ 1.028683] Freeing initrd memory: 56132K
[ 1.028731] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[ 1.028736] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[ 1.028749] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.028751] software IO TLB [mem 0x9898f000-0x9c98f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.028945] Scanning for low memory corruption every 60 seconds
[ 1.029551] Initialise system trusted keyrings
[ 1.029558] Key type blacklist registered
[ 1.029586] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.030638] zbud: loaded
[ 1.031109] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.031222] fuse init (API version 7.26)
[ 1.032298] Key type asymmetric registered
[ 1.032300] Asymmetric key parser 'x509' registered
[ 1.032325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.032356] io scheduler noop registered
[ 1.032357] io scheduler deadline registered
[ 1.032398] io scheduler cfq registered (default)
[ 1.033033] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[ 1.033048] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[ 1.033062] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[ 1.033080] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.033150] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 1.033150] vesafb: scrolling: redraw
[ 1.033152] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.033161] vesafb: framebuffer at 0xb0000000, mapped to 0x (ptrval), using 5632k, total 5632k
[ 1.033238] Console: switching to colour frame buffer device 200x56
[ 1.033258] fb0: VESA VGA frame buffer device
[ 1.033271] intel_idle: MWAIT substates: 0x11142120
[ 1.033272] intel_idle: v0.4.1 model 0x3D
[ 1.033439] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.033916] ACPI: AC Adapter [ADP0] (on-line)
[ 1.033973] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.033992] ACPI: Lid Switch [LID0]
[ 1.034020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.034035] ACPI: Power Button [PWRB]
[ 1.034063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.034075] ACPI: Power Button [PWRF]
[ 1.034443] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.036694] Linux agpgart interface v0.103
[ 1.037975] loop: module loaded
[ 1.038115] libphy: Fixed MDIO Bus: probed
[ 1.038115] tun: Universal TUN/TAP device driver, 1.6
[ 1.038139] PPP generic driver version 2.4.2
[ 1.038174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.038176] ehci-pci: EHCI PCI platform driver
[ 1.038303] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.038308] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.038320] ehci-pci 0000:00:1d.0: debug port 2
[ 1.042221] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.042233] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[ 1.056070] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.056113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.056115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056116] usb usb1: Product: EHCI Host Controller
[ 1.056118] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
[ 1.056119] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.056328] hub 1-0:1.0: USB hub found
[ 1.056333] hub 1-0:1.0: 2 ports detected
[ 1.056484] ehci-platform: EHCI generic platform driver
[ 1.056500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.056503] ohci-pci: OHCI PCI platform driver
[ 1.056512] ohci-platform: OHCI generic platform driver
[ 1.056517] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.056642] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.056644] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 1.056661] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.056668] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.057731] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.057735] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.057850] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.057852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.057853] usb usb2: Product: xHCI Host Controller
[ 1.057854] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 1.057856] usb usb2: SerialNumber: 0000:00:14.0
[ 1.058031] hub 2-0:1.0: USB hub found
[ 1.058042] hub 2-0:1.0: 11 ports detected
[ 1.063143] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.063148] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.063152] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.063182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.063183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.063185] usb usb3: Product: xHCI Host Controller
[ 1.063186] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 1.063187] usb usb3: SerialNumber: 0000:00:14.0
[ 1.063371] hub 3-0:1.0: USB hub found
[ 1.063378] hub 3-0:1.0: 4 ports detected
[ 1.065109] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.080476] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.080480] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.080747] mousedev: PS/2 mouse device common for all mice
[ 1.081105] rtc_cmos 00:01: RTC can wake from S4
[ 1.081116] rtc_cmos: probe of 00:01 failed with error -16
[ 1.081130] i2c /dev entries driver
[ 1.081176] device-mapper: uevent: version 1.0.3
[ 1.081233] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.081240] intel_pstate: Intel P-state driver initializing
[ 1.081395] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.081722] NET: Registered protocol family 10
[ 1.085115] Segment Routing with IPv6
[ 1.085141] NET: Registered protocol family 17
[ 1.085186] Key type dns_resolver registered
[ 1.085428] RAS: Correctable Errors collector initialized.
[ 1.085462] microcode: sig=0x306d4, pf=0x40, revision=0x2a
[ 1.085500] microcode: Microcode Update Driver: v2.2.
[ 1.085507] sched_clock: Marking stable (1085497388, 0)->(1065194739, 20302649)
[ 1.085650] registered taskstats version 1
[ 1.085660] Loading compiled-in X.509 certificates
[ 1.087635] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[ 1.087651] zswap: loaded using pool lzo/zbud
[ 1.089223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.090302] Key type big_key registered
[ 1.090304] Key type trusted registered
[ 1.091487] Key type encrypted registered
[ 1.091490] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.091492] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.091503] evm: HMAC attrs: 0x1
[ 1.091981] Magic number: 14:83:63
[ 1.092051] hctosys: unable to open rtc device (rtc0)
[ 1.092087] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.092088] EDD information not available.
[ 1.132865] ACPI: Battery Slot [BAT0] (battery present)
[ 1.392029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.400028] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.453485] Freeing unused kernel memory: 2408K
[ 1.468056] Write protecting the kernel read-only data: 20480k
[ 1.469189] Freeing unused kernel memory: 2008K
[ 1.472507] Freeing unused kernel memory: 1900K
[ 1.477479] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.477479] x86/mm: Checking user space page tables
[ 1.482624] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.548402] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.548404] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.548697] hub 1-1:1.0: USB hub found
[ 1.548771] hub 1-1:1.0: 8 ports detected
[ 1.550033] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
[ 1.550035] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.550037] usb 2-3: Product: USB Receiver
[ 1.550039] usb 2-3: Manufacturer: Logitech
[ 1.557086] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.557093] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.558155] ahci 0000:00:1f.2: version 3.0
[ 1.568372] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.568376] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.568975] scsi host0: ahci
[ 1.569128] scsi host1: ahci
[ 1.569247] scsi host2: ahci
[ 1.569355] scsi host3: ahci
[ 1.569393] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
[ 1.569395] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.569400] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
[ 1.569401] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
[ 1.569402] ata3: DUMMY
[ 1.569403] ata4: DUMMY
[ 1.584711] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.602811] [drm] Memory usable by graphics device = 4096M
[ 1.602813] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[ 1.602814] fb: switching to inteldrmfb from VESA VGA
[ 1.602832] Console: switching to colour dummy device 80x25
[ 1.602916] [drm] Replacing VGA console driver
[ 1.608090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.608090] [drm] Driver supports precise vblank timestamp query.
[ 1.610205] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.616819] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.618630] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.618931] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.651524] fbcon: inteldrmfb (fb0) is primary device
[ 1.651573] Console: switching to colour frame buffer device 200x56
[ 1.651593] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.680057] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.828375] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.828377] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.828378] usb 2-4: Product: USB2.0-CRW
[ 1.828380] usb 2-4: Manufacturer: Generic
[ 1.828381] usb 2-4: SerialNumber: 20100201396000000
[ 1.883130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.883326] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.885354] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[ 1.886979] ata2.00: configured for UDMA/133
[ 1.920499] ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
[ 1.920500] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.956054] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[ 2.044085] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 2.044093] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[ 2.053283] ata1.00: configured for UDMA/133
[ 2.053531] scsi 0:0:0:0: Direct-Access ATA ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
[ 2.053899] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.053965] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.053967] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.053984] sd 0:0:0:0: [sda] Write Protect is off
[ 2.053986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.054018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.056080] random: fast init done
[ 2.056092] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
[ 2.067667] sda: sda1
[ 2.067775] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.067785] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.067798] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.067960] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.132096] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.132097] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.132217] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.132297] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.142850] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[ 2.142852] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.142853] usb 2-6: Product: Lenovo EasyCamera
[ 2.142854] usb 2-6: Manufacturer: J58F5583G
[ 2.142855] usb 2-6: SerialNumber: 200901010001
[ 2.192679] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[ 2.208119] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[ 2.222847] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[ 2.272045] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 2.307791] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 2.421246] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[ 2.421248] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.426384] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.426653] usbcore: registered new interface driver rtsx_usb
[ 2.429845] usbcore: registered new interface driver usbhid
[ 2.429846] usbhid: USB HID core driver
[ 2.432251] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
[ 2.432323] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 2.432454] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
[ 2.492237] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 3.068236] clocksource: Switched to clocksource tsc
[ 35.378679] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 35.624077] random: crng init done
[ 35.624078] random: 7 urandom warning(s) missed due to ratelimiting
[ 37.255038] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.363069] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 37.380135] systemd[1]: Detected architecture x86-64.
[ 37.391971] systemd[1]: Set hostname to <home-B70-80>.
[ 39.102974] systemd[1]: Created slice System Slice.
[ 39.103101] systemd[1]: Listening on Journal Socket.
[ 39.103714] systemd[1]: Mounting Huge Pages File System...
[ 39.103777] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 39.103979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 39.104060] systemd[1]: Listening on Syslog Socket.
[ 39.104112] systemd[1]: Listening on LVM2 poll daemon socket.
[ 39.584029] lp: driver loaded but no devices found
[ 39.626056] ppdev: user-space parallel port driver
[ 40.017398] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 40.291095] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 40.311282] systemd-journald[444]: Received request to flush runtime journal from PID 1
[ 41.081018] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 56.852518] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[ 56.870840] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.384385] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 57.384387] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 57.384388] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 57.384389] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 57.384390] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 57.919640] audit: type=1400 audit(1535346389.912:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=958 comm="apparmor_parser"
[ 57.920273] audit: type=1400 audit(1535346389.916:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=954 comm="apparmor_parser"
[ 57.920276] audit: type=1400 audit(1535346389.916:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=954 comm="apparmor_parser"
[ 57.920279] audit: type=1400 audit(1535346389.916:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=954 comm="apparmor_parser"
[ 57.920281] audit: type=1400 audit(1535346389.916:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=954 comm="apparmor_parser"
[ 57.921171] audit: type=1400 audit(1535346389.916:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=960 comm="apparmor_parser"
[ 57.921356] audit: type=1400 audit(1535346389.916:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=959 comm="apparmor_parser"
[ 57.921359] audit: type=1400 audit(1535346389.916:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=959 comm="apparmor_parser"
[ 57.921361] audit: type=1400 audit(1535346389.916:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=959 comm="apparmor_parser"
[ 57.922141] audit: type=1400 audit(1535346389.916:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=961 comm="apparmor_parser"
[ 58.484835] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 58.486997] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 58.770679] AVX2 version of gcm_enc/dec engaged.
[ 58.770680] AES CTR mode by8 optimization enabled
[ 59.316992] Intel(R) Wireless WiFi driver for Linux
[ 59.316992] Copyright(c) 2003- 2015 Intel Corporation
[ 59.810616] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 59.839207] Bluetooth: Core ver 2.22
[ 59.839222] NET: Registered protocol family 31
[ 59.839223] Bluetooth: HCI device and connection manager initialized
[ 59.839225] Bluetooth: HCI socket layer initialized
[ 59.839227] Bluetooth: L2CAP socket layer initialized
[ 59.839230] Bluetooth: SCO socket layer initialized
[ 59.991185] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[ 60.027114] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 60.027158] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 60.027191] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 60.027224] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 60.027259] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 60.048237] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 60.048539] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 60.048540] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 60.048542] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 60.048543] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 60.048544] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 60.048545] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 60.048546] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 60.049289] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[ 60.051487] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 60.051526] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 60.481982] media: Linux media interface: v0.10
[ 61.080652] Linux video capture interface: v2.00
[ 61.505185] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[ 61.507822] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 61.507824] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 61.507825] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 61.507891] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[ 61.507947] usbcore: registered new interface driver uvcvideo
[ 61.507948] USB Video Class driver (1.1.1)
[ 61.586912] intel_rapl: Found RAPL domain package
[ 61.586913] intel_rapl: Found RAPL domain core
[ 61.586914] intel_rapl: Found RAPL domain uncore
[ 61.586915] intel_rapl: Found RAPL domain dram
[ 61.586917] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 61.586921] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 61.700311] usbcore: registered new interface driver btusb
[ 61.712656] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[ 61.736513] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[ 61.776077] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 61.797211] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
[ 61.860646] Bluetooth: hci0: Intel firmware patch completed and activated
[ 62.592679] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 62.594165] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 66.194507] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k FS
[ 71.932863] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 71.932864] Bluetooth: BNEP filters: protocol multicast
[ 71.932867] Bluetooth: BNEP socket layer initialized
[ 76.796295] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 76.933967] r8169 0000:02:00.0 enp2s0: link down
[ 76.934060] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 77.163472] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 77.318954] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 77.776896] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 80.987247] wlp3s0: authenticate with a0:64:8f:38:b2:c9
[ 80.991827] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
[ 80.993610] wlp3s0: authenticated
[ 81.000023] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
[ 81.001092] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
[ 81.002444] wlp3s0: associated
[ 81.086033] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
[ 81.087057] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 101.180662] Bluetooth: RFCOMM TTY layer initialized
[ 101.180668] Bluetooth: RFCOMM socket layer initialized
[ 101.180672] Bluetooth: RFCOMM ver 1.11
[ 117.567052] rfkill: input handler disabled
[ 186.714760] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 186.757110] JFS: nTxBlock = 8192, nTxLock = 65536
[ 186.806437] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 186.893595] QNX4 filesystem 0.2.3 registered.
[ 186.964391] raid6: sse2x1 gen() 7476 MB/s
[ 187.012385] raid6: sse2x1 xor() 6029 MB/s
[ 187.060381] raid6: sse2x2 gen() 10809 MB/s
[ 187.108387] raid6: sse2x2 xor() 7083 MB/s
[ 187.156376] raid6: sse2x4 gen() 13753 MB/s
[ 187.204388] raid6: sse2x4 xor() 8818 MB/s
[ 187.252370] raid6: avx2x1 gen() 19509 MB/s
[ 187.300386] raid6: avx2x1 xor() 13080 MB/s
[ 187.348386] raid6: avx2x2 gen() 23143 MB/s
[ 187.396386] raid6: avx2x2 xor() 13623 MB/s
[ 187.444387] raid6: avx2x4 gen() 24912 MB/s
[ 187.492386] raid6: avx2x4 xor() 16711 MB/s
[ 187.492387] raid6: using algorithm avx2x4 gen() 24912 MB/s
[ 187.492388] raid6: .... xor() 16711 MB/s, rmw enabled
[ 187.492389] raid6: using avx2x2 recovery algorithm
[ 187.561379] xor: automatically using best checksumming function avx
[ 187.743788] Btrfs loaded, crc32c=crc32c-intel
[ 196.491666] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 321.494169] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 446.498117] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 571.500630] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 696.505009] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 821.508088] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 946.512945] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1071.516190] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1196.518535] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1321.522375] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1446.525471] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1571.527911] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1696.531334] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1821.535669] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 1946.537471] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2071.541067] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2196.545393] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2321.548169] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2446.551088] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2571.554475] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2696.557534] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2821.560813] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 2946.563966] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3071.567045] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3196.569919] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3321.573343] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3446.577192] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3571.579447] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3696.582493] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3821.586082] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3946.590080] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 3959.911125] usb 2-2: new full-speed USB device number 6 using xhci_hcd
[ 3960.061406] usb 2-2: New USB device found, idVendor=04b3, idProduct=4045
[ 3960.061412] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3960.061416] usb 2-2: Product: IBM BlueZ ZTIC
[ 3960.061420] usb 2-2: Manufacturer: BlueZ
[ 3960.061423] usb 2-2: SerialNumber: DBAB9C092AF8F19
[ 3960.630855] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 3960.630951] scsi host4: usb-storage 2-2:1.0
[ 3960.631042] usbcore: registered new interface driver usb-storage
[ 3960.643577] usbcore: registered new interface driver uas
[ 3960.658880] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 3960.658897] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 3960.658909] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 3960.658919] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 3960.658931] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=976504 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 3960.658941] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=916337 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 3960.669103] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 3960.669124] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 3960.669141] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 3960.669156] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 3961.639246] scsi 4:0:0:0: Direct-Access BlueZ ZTIC (MSD) 1.00 PQ: 0 ANSI: 6
[ 3961.640047] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3961.640198] sd 4:0:0:0: [sdb] 331 512-byte logical blocks: (169 kB/166 KiB)
[ 3961.640457] sd 4:0:0:0: [sdb] Write Protect is off
[ 3961.640460] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3961.640712] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3961.640716] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3961.657001] sdb:
[ 3961.658183] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3975.331030] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:200e DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=75828 PROTO=TCP SPT=80 DPT=46904 WINDOW=0 RES=0x00 RST URGP=0
[ 3975.489521] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=423960 PROTO=TCP SPT=443 DPT=46002 WINDOW=0 RES=0x00 RST URGP=0
[ 3979.260118] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:200e DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=75828 PROTO=TCP SPT=80 DPT=46904 WINDOW=0 RES=0x00 RST URGP=0
[ 3979.524373] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=423960 PROTO=TCP SPT=443 DPT=46002 WINDOW=0 RES=0x00 RST URGP=0
[ 3986.938509] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:200e DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=75828 PROTO=TCP SPT=80 DPT=46904 WINDOW=0 RES=0x00 RST URGP=0
[ 3987.451409] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=423960 PROTO=TCP SPT=443 DPT=46002 WINDOW=0 RES=0x00 RST URGP=0
[ 4003.317651] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=423960 PROTO=TCP SPT=443 DPT=46002 WINDOW=0 RES=0x00 RST URGP=0
[ 4071.594265] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4196.596423] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4197.209642] usb 2-2: USB disconnect, device number 6
[ 4197.241353] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[ 4197.285120] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 4197.285134] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 4197.285144] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 4197.285154] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 4197.285164] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=976504 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 4197.285174] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=916337 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 4197.295330] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 4197.295342] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 4197.295352] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 4197.295361] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 4233.651377] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.32.56 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27648 DF PROTO=TCP SPT=80 DPT=45488 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[ 4234.110650] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.2 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27847 DF PROTO=TCP SPT=80 DPT=49072 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[ 4235.662788] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.142 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=56469 DF PROTO=TCP SPT=80 DPT=57576 WINDOW=14600 RES=0x00 ACK FIN URGP=0
[ 4236.667182] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.32.56 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27649 DF PROTO=TCP SPT=80 DPT=45488 WINDOW=7300 RES=0x00 ACK URGP=0
[ 4237.213530] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.2 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27848 DF PROTO=TCP SPT=80 DPT=49072 WINDOW=7300 RES=0x00 ACK URGP=0
[ 4237.514463] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.32.56 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27650 DF PROTO=TCP SPT=80 DPT=45488 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[ 4238.423131] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.2 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27849 DF PROTO=TCP SPT=80 DPT=49072 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[ 4238.881405] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.142 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=56470 DF PROTO=TCP SPT=80 DPT=57576 WINDOW=14600 RES=0x00 ACK URGP=0
[ 4239.248402] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=878701 PROTO=TCP SPT=443 DPT=47216 WINDOW=0 RES=0x00 RST URGP=0
[ 4239.249622] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=878701 PROTO=TCP SPT=443 DPT=47216 WINDOW=0 RES=0x00 RST URGP=0
[ 4239.342678] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=823475 PROTO=TCP SPT=443 DPT=46726 WINDOW=0 RES=0x00 RST URGP=0
[ 4240.493796] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.32.56 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=27651 DF PROTO=TCP SPT=80 DPT=45488 WINDOW=7300 RES=0x00 ACK URGP=0
[ 4241.979607] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.142 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=56471 DF PROTO=TCP SPT=80 DPT=57576 WINDOW=14600 RES=0x00 ACK URGP=0
[ 4252.252423] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0802:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=128 HOPLIMIT=60 FLOWLBL=152172 PROTO=TCP SPT=443 DPT=37114 WINDOW=0 RES=0x00 RST URGP=0
[ 4271.087384] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:2003 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=0 HOPLIMIT=58 FLOWLBL=823475 PROTO=TCP SPT=443 DPT=46726 WINDOW=0 RES=0x00 RST URGP=0
[ 4321.599546] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4446.603944] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4571.606068] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4696.610045] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4818.801900] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=29620 DF PROTO=TCP SPT=443 DPT=59348 WINDOW=0 RES=0x00 RST URGP=0
[ 4821.613797] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 4934.138801] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=18.196.158.133 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=18995 DF PROTO=TCP SPT=443 DPT=54076 WINDOW=0 RES=0x00 RST URGP=0
[ 4946.617321] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5071.619249] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5196.625644] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5321.627486] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5359.335908] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=55 ID=50490 DF PROTO=TCP SPT=443 DPT=60288 WINDOW=0 RES=0x00 RST URGP=0
[ 5374.388020] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=18.196.158.133 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=59711 DF PROTO=TCP SPT=443 DPT=54870 WINDOW=0 RES=0x00 RST URGP=0
[ 5412.096922] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=23.111.9.217 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=25547 DF PROTO=TCP SPT=443 DPT=44734 WINDOW=0 RES=0x00 RST URGP=0
[ 5412.097028] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=23.111.9.217 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=25548 DF PROTO=TCP SPT=443 DPT=44734 WINDOW=0 RES=0x00 RST URGP=0
[ 5412.139131] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=23.111.11.100 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=22216 DF PROTO=TCP SPT=443 DPT=47266 WINDOW=0 RES=0x00 RST URGP=0
[ 5412.139700] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=23.111.11.100 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=22217 DF PROTO=TCP SPT=443 DPT=47266 WINDOW=0 RES=0x00 RST URGP=0
[ 5446.630661] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5571.633804] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5696.636355] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5821.639988] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 5922.252337] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a04:4e42:0009:0000:0000:0000:0000:0621 DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=103 TC=0 HOPLIMIT=57 FLOWLBL=988393 PROTO=TCP SPT=443 DPT=47768 WINDOW=60 RES=0x00 ACK PSH FIN URGP=0
[ 5946.645229] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6003.873779] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:86:dd SRC=2a00:1450:400a:0803:0000:0000:0000:200e DST=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 LEN=60 TC=128 HOPLIMIT=60 FLOWLBL=1024071 PROTO=TCP SPT=443 DPT=50948 WINDOW=0 RES=0x00 RST URGP=0
[ 6071.645101] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6196.649791] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6321.652669] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6446.656222] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6571.659326] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6696.662603] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6821.666471] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 6946.668719] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7071.672911] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7196.675680] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7321.680116] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7446.684174] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7571.687188] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7696.689929] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7821.696231] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 7946.698793] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8071.701605] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8196.705274] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8321.708003] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8446.712577] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8571.715219] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8696.719038] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8821.723715] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8946.725809] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9071.730186] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9196.731258] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9321.737189] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9446.738294] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9571.741621] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9696.745406] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9821.748822] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 9946.753905] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10071.756983] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10196.759798] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10321.762930] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10446.766530] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10571.769976] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10696.772840] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10821.776135] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[10946.780903] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11071.784813] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11196.788681] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11321.792598] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11446.798355] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11571.800626] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11696.804957] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11821.806175] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11946.809393] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12071.814460] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12196.817127] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12321.820298] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12446.823042] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12571.827060] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12696.829846] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12821.832897] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[12946.836255] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13071.838145] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13196.842154] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13321.844622] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13446.847745] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13571.852857] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13696.855034] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13821.859609] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[13946.862941] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14071.866563] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14196.869796] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14321.871571] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14446.876590] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14571.880354] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14696.883465] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14821.886402] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[14946.890787] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15071.893732] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15138.436045] kauditd_printk_skb: 53 callbacks suppressed
[15138.436046] audit: type=1400 audit(1535361472.694:65): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.skype" pid=12918 comm="apparmor_parser"
[15138.440104] audit: type=1400 audit(1535361472.698:66): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.skype.skype" pid=12920 comm="apparmor_parser"
[15196.896077] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15321.898774] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15446.904117] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15571.907954] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15696.911199] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15821.914325] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[15946.917544] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16071.920772] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16196.924073] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16321.927234] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16446.931759] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16571.934967] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16696.937795] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16821.940926] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[16946.944417] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17071.949286] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17196.952840] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17321.956104] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17446.959240] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17571.961990] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17696.966383] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17821.970875] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[17946.972980] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18071.976521] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18196.980197] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18321.983802] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18446.987452] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18571.990192] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18696.992892] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18821.996639] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[18947.001432] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19072.005293] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19197.007865] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19322.011449] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19447.014584] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19572.017864] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19697.021059] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19822.023841] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[19947.027170] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20072.031687] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20197.034607] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20322.038715] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20447.041839] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20572.045457] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20697.048314] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20822.052896] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[20947.055783] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21072.059317] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21197.061950] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21322.065736] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21447.068559] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21572.072204] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21607.619233] usb 2-2: new full-speed USB device number 7 using xhci_hcd
[21607.768939] usb 2-2: New USB device found, idVendor=04b3, idProduct=4045
[21607.768943] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21607.768945] usb 2-2: Product: IBM BlueZ ZTIC
[21607.768947] usb 2-2: Manufacturer: BlueZ
[21607.768949] usb 2-2: SerialNumber: DBAB9C092AF8F19
[21607.770491] usb-storage 2-2:1.0: USB Mass Storage device detected
[21607.770790] scsi host4: usb-storage 2-2:1.0
[21608.358535] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21608.358555] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21608.358574] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21608.358593] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21608.358612] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=976504 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21608.358629] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=916337 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21608.368998] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21608.369068] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21608.369104] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21608.369143] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21608.771693] scsi 4:0:0:0: Direct-Access BlueZ ZTIC (MSD) 1.00 PQ: 0 ANSI: 6
[21608.772203] sd 4:0:0:0: Attached scsi generic sg2 type 0
[21608.772587] sd 4:0:0:0: [sdb] 331 512-byte logical blocks: (169 kB/166 KiB)
[21608.772849] sd 4:0:0:0: [sdb] Write Protect is off
[21608.772852] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[21608.773106] sd 4:0:0:0: [sdb] No Caching mode page found
[21608.773110] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[21608.790580] sdb:
[21608.792427] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[21697.075202] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21822.078334] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[21944.214070] usb 2-2: USB disconnect, device number 7
[21944.238035] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[21944.298878] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21944.298907] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21944.298926] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21944.298945] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21944.298965] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=976504 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21944.298986] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2557:b33f:ae71:b82c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=916337 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21944.311853] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=29173 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21944.311884] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:8d0b:1879:42a8:8b55 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=283170 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21944.311909] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=848833 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[21944.311930] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:1205:5007:40f0:02d3:8b1c:b31c:8567 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=445383 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[21947.080654] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22072.084612] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22197.087500] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22322.091125] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22447.094359] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22572.097591] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22697.100714] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22822.104644] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[22947.107831] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23072.111110] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23197.116061] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23305.771743] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.34.20 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=294 DF PROTO=TCP SPT=80 DPT=56242 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23305.813493] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.61.141 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=8392 DF PROTO=TCP SPT=80 DPT=59766 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23306.741424] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.34.20 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=295 DF PROTO=TCP SPT=80 DPT=56242 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23306.808604] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.61.141 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=8393 DF PROTO=TCP SPT=80 DPT=59766 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23308.630376] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=140.205.34.20 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=296 DF PROTO=TCP SPT=80 DPT=56242 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23308.760187] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.142 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=9123 DF PROTO=TCP SPT=80 DPT=35504 WINDOW=14600 RES=0x00 ACK URGP=0
[23308.802842] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.61.141 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=8394 DF PROTO=TCP SPT=80 DPT=59766 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23308.941384] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=47.88.68.42 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=51265 DF PROTO=TCP SPT=80 DPT=49974 WINDOW=7300 RES=0x00 ACK FIN URGP=0
[23310.841726] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.248.142 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=9124 DF PROTO=TCP SPT=80 DPT=35504 WINDOW=14600 RES=0x00 ACK FIN URGP=0
[23311.803671] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=106.11.61.141 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=40 ID=8395 DF PROTO=TCP SPT=80 DPT=59766 WINDOW=7300 RES=0x00 ACK URGP=0
[23322.119789] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23334.489009] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=55 ID=5872 DF PROTO=TCP SPT=443 DPT=36148 WINDOW=0 RES=0x00 RST URGP=0
[23392.532327] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=55 ID=7104 DF PROTO=TCP SPT=443 DPT=36302 WINDOW=0 RES=0x00 RST URGP=0
[23447.124038] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23459.127876] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=18.196.158.133 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=34014 DF PROTO=TCP SPT=443 DPT=59160 WINDOW=0 RES=0x00 RST URGP=0
[23484.094293] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=19841 DF PROTO=TCP SPT=443 DPT=36556 WINDOW=0 RES=0x00 RST URGP=0
[23514.239055] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=136.144.49.28 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=39480 DF PROTO=TCP SPT=443 DPT=39666 WINDOW=0 RES=0x00 RST URGP=0
[23514.239908] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=136.144.49.28 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=39481 DF PROTO=TCP SPT=443 DPT=39666 WINDOW=0 RES=0x00 RST URGP=0
[23514.240072] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=136.144.49.28 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=39482 DF PROTO=TCP SPT=443 DPT=39666 WINDOW=0 RES=0x00 RST URGP=0
[23572.127141] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23599.263698] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=48673 DF PROTO=TCP SPT=443 DPT=36640 WINDOW=0 RES=0x00 RST URGP=0
[23604.549030] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=185.33.223.83 DST=192.168.1.116 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=54369 DF PROTO=TCP SPT=443 DPT=58300 WINDOW=0 RES=0x00 RST URGP=0
[23612.489949] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=9614 DF PROTO=TCP SPT=443 DPT=36658 WINDOW=0 RES=0x00 RST URGP=0
[23612.490257] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=9615 DF PROTO=TCP SPT=443 DPT=36658 WINDOW=0 RES=0x00 RST URGP=0
[23618.883096] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=173.241.240.143 DST=192.168.1.116 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=13793 DF PROTO=TCP SPT=443 DPT=36680 WINDOW=0 RES=0x00 RST URGP=0
[23697.130313] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23822.132962] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[23947.136490] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24072.140118] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24197.143056] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24322.146230] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24447.150756] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24572.153974] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24697.157664] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24822.160995] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[24947.165694] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25072.170229] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25197.174236] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25322.177197] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25447.180915] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25572.185089] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25697.188345] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25822.190997] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[25947.194925] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26072.197737] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26197.200850] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26322.204164] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26447.207467] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26572.210511] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26697.212852] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26822.217431] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[26947.220535] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27072.223160] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27197.228365] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27322.231913] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27447.235399] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27572.238240] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27697.241349] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27822.244800] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[27947.249169] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28072.253139] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28197.256676] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28322.261361] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28447.263930] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28572.268260] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28697.271354] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28822.274607] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[28947.277785] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[29072.280756] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[29197.284326] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[29322.289465] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e4:f8:9c:13:f4:6b:a0:64:8f:38:b2:c0:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x08 PREC=0x80 TTL=1 ID=0 DF PROTO=2 [/i]Si quelqu'un pouvait m'aider et m'expliquer ce qui se passe cela serrait gentil, note je ne suis pas un expert mais un débutant même si j'utilise ubuntu depuis bientôt 10 ans
en vous remerciant d'avance, Je vous souhaite une excellente journée
Fabrice
Dernière modification par f.vuilliomenet (Le 29/08/2018, à 23:06)
Hors ligne
#2 Le 27/08/2018, à 15:43
- xubu1957
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjour,
Pour ajouter toi-même les balises code à ton précédent message #1 : Merci 
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
comme indiqué dans le : Retour utilisable de commande
_ _ _
Voir règles du forum > balises BB code
Balise CODE :
C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.
Dernière modification par xubu1957 (Le 27/08/2018, à 15:58)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 27/08/2018, à 16:07
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
merci pour le lien,
c'est vraiment plus claire avec les balises
Hors ligne
#4 Le 28/08/2018, à 08:20
- xubu1957
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjour,
Pour :
[UFW BLOCK] IN=wlp3s0Je trouve ce type de réponses :
> askubuntu.com/questions/184290/why-im-getting-this-ufw-block-in-my-syslogs
> askubuntu.com/questions/828223/ufw-block-entries-in-the-log
_ _ _
Donne aussi :
lspci -k -nn | grep -A 3 -i netiwconfigifconfig -a _ _ _
ou :
ip -c a_ _ _
uname -r -m nmcli dev wifiDernière modification par xubu1957 (Le 28/08/2018, à 08:57)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 28/08/2018, à 09:06
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjour,
Pour commencer voila:
lspci -k -nn | grep -A 3 -i net
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:3819]
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b4] (rev 93)
Subsystem: Intel Corporation Dual Band Wireless AC 3160 [8086:8270]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifiiwconfig:
enp2s0 no wireless extensions.
wlp3s0 IEEE 802.11 ESSID:"home11"
Mode:Managed Frequency:5.18 GHz Access Point: A0:64:8F:38:B2:C9
Bit Rate=433.3 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=69/70 Signal level=-41 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:127 Missed beacon:0
lo no wireless extensions.ifconfig -a:
enp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 68:f7:28:ee:44:2e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Boucle locale)
RX packets 858 bytes 72845 (72.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 858 bytes 72845 (72.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.116 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::2557:b33f:ae71:b82c prefixlen 64 scopeid 0x20<link>
inet6 2a02:1205:5007:40f0:598a:7f12:31a:6f25 prefixlen 64 scopeid 0x0<global>
inet6 2a02:1205:5007:40f0:2d3:8b1c:b31c:8567 prefixlen 64 scopeid 0x0<global>
ether e4:f8:9c:13:f4:6b txqueuelen 1000 (Ethernet)
RX packets 11986 bytes 10428096 (10.4 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8431 bytes 1181681 (1.1 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0uname -r -m:
4.15.0-33-generic x86_64nmcli dev wifi:
IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
* home11 Infra 36 540 Mo/s 79 ▂▄▆_ WPA2Je regards les 2 liens et je donne un retours
merci
Fabrice
Hors ligne
#6 Le 28/08/2018, à 09:11
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjour,
Vu :
rtc_cmos: probe of 00:01 failed with error -16Quel est le type d'ordinateur (portable/tour) et quelle est sa référence commerciale?
UFW est le pare-feu. Il envoie beaucoup de message après le boot. Pas sûr que le problème vienne de là. Par contre, est ce que UFW est vraiment nécessaire? Quelle est l'utilisation de ce PC? Si il est derrière une box, pour une utilisation internet normale, ça ne sert à rien du tout...
Hors ligne
#7 Le 28/08/2018, à 09:14
- xubu1957
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Pour la carte wifi :
Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b4] (rev 93)Tu peux essayer cette commande :
Le 01/05/2014, ytreza a écrit :
Bonjour !
Merci Toutafai !
J'ai enfin résolu le problème à l'aide de Varunendra sur le forum anglophone. Tu étais très proche de la solution, il fallait finalement remplacer le contenu du fichier (et pas ajouter à la fin comme je l'ai fait). Et il fallait aussi modifier un paramètre concernant l'utilisation simultanée du Wifi et du Bluetooth dans mon cas. Voici la manipulation exacte que j’ai utilisée :echo "options iwlwifi bt_coex_active=N swcrypto=1 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.confA priori, le paramètre "swcrypto" ne semble avoir aucune incidence sur ma connexion, mais je le laisse par simple précaution.
Le détails des options est expliqué très clairement ici (en anglais) : http://ubuntuforums.org/showpost.php?p=12943350
...
Merci encore pour toute ton aide !
dans [Résolu] Wifi instable Ubuntu 14.04 Intel Wireless-N 1030
et proposée le 01/05/2017, dans : [Resolu]Problème wifi après installation de ubuntu - Carte wifi Intel pour une carte wifi Intel Corporation Wireless 7265.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#8 Le 28/08/2018, à 09:17
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Bonjour,
Ordinateur portable: Lenovo B70-80 (17.30", Intel® Core™ i7-5500U CPU @ 2.40GHz × 4, 8GB, HDD 1T, Intel® HD Graphics 5500 (Broadwell GT2))
Utilisation à la maison de type bureau (pas de jeux)
Connecter derrière une Box internet (Swisscom)
Hors ligne
#9 Le 28/08/2018, à 09:25
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
J'ai désactivé UFW
voilà dmesg après le démarrage sans UFW
[ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
[ 0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c98efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c98f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 14800M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x10933f000, 0x10933ffff] PGTABLE
[ 0.000000] BRK [0x109340000, 0x109340fff] PGTABLE
[ 0.000000] BRK [0x109341000, 0x109341fff] PGTABLE
[ 0.000000] BRK [0x109342000, 0x109342fff] PGTABLE
[ 0.000000] BRK [0x109343000, 0x109343fff] PGTABLE
[ 0.000000] BRK [0x109344000, 0x109344fff] PGTABLE
[ 0.000000] BRK [0x109345000, 0x109345fff] PGTABLE
[ 0.000000] BRK [0x109346000, 0x109346fff] PGTABLE
[ 0.000000] BRK [0x109347000, 0x109347fff] PGTABLE
[ 0.000000] BRK [0x109348000, 0x109348fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3122f000-0x3490efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFD0188 0000CC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF7A000 000040
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000096f79fff]
[ 0.000000] node 0: [mem 0x000000009787a000-0x000000009c98efff]
[ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[ 0.000000] On node 0 totalpages: 2076717
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9923 pages used for memmap
[ 0.000000] DMA32 zone: 635024 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c98f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044245
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8024652K/8306868K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 282216K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39121 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 39
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
[ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[ 0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2394.473 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.94 BogoMIPS (lpj=9577892)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028194] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028195] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028200] mce: CPU supports 7 MCE banks
[ 0.028219] process: using mwait in idle threads
[ 0.028221] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.028222] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.028224] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028224] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028225] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028226] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.034488] Freeing SMP alternatives memory: 36K
[ 0.036060] TSC deadline timer enabled
[ 0.036062] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.036124] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.036168] ... version: 3
[ 0.036168] ... bit width: 48
[ 0.036169] ... generic registers: 4
[ 0.036170] ... value mask: 0000ffffffffffff
[ 0.036170] ... max period: 00007fffffffffff
[ 0.036171] ... fixed-purpose events: 3
[ 0.036171] ... event mask: 000000070000000f
[ 0.036203] Hierarchical SRCU implementation.
[ 0.037205] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.037217] smp: Bringing up secondary CPUs ...
[ 0.037285] x86: Booting SMP configuration:
[ 0.037286] .... node #0, CPUs: #1 #2 #3
[ 0.040490] smp: Brought up 1 node, 4 CPUs
[ 0.040490] smpboot: Max logical packages: 1
[ 0.040490] smpboot: Total of 4 processors activated (19155.78 BogoMIPS)
[ 0.044253] devtmpfs: initialized
[ 0.044253] x86/mm: Memory block size: 128MB
[ 0.044697] evm: security.selinux
[ 0.044698] evm: security.SMACK64
[ 0.044698] evm: security.SMACK64EXEC
[ 0.044699] evm: security.SMACK64TRANSMUTE
[ 0.044699] evm: security.SMACK64MMAP
[ 0.044700] evm: security.apparmor
[ 0.044700] evm: security.ima
[ 0.044701] evm: security.capability
[ 0.044713] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.044713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044713] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.044713] pinctrl core: initialized pinctrl subsystem
[ 0.044713] RTC time: 7:18:46, date: 08/28/18
[ 0.044713] NET: Registered protocol family 16
[ 0.044713] audit: initializing netlink subsys (disabled)
[ 0.044713] audit: type=2000 audit(1535440725.044:1): state=initialized audit_enabled=0 res=1
[ 0.044713] cpuidle: using governor ladder
[ 0.044713] cpuidle: using governor menu
[ 0.044713] Simple Boot Flag at 0x44 set to 0x1
[ 0.044713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044713] ACPI: bus type PCI registered
[ 0.044713] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044713] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.044713] PCI: Using configuration type 1 for base access
[ 0.045189] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.045189] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045189] ACPI: Added _OSI(Module Device)
[ 0.045189] ACPI: Added _OSI(Processor Device)
[ 0.045189] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.045189] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045189] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.048005] ACPI: Executed 7 blocks of module-level executable AML code
[ 0.056030] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.057467] ACPI: Dynamic OEM Table Load:
[ 0.057475] ACPI: SSDT 0xFFFF8B77D4928400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.057689] ACPI: Dynamic OEM Table Load:
[ 0.057689] ACPI: SSDT 0xFFFF8B77D4E64800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
[ 0.060174] ACPI: Dynamic OEM Table Load:
[ 0.060181] ACPI: SSDT 0xFFFF8B77D48D7400 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
[ 0.060935] ACPI: EC: EC started
[ 0.060935] ACPI: EC: interrupt blocked
[ 0.061495] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.061497] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.061498] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.061499] ACPI: Interpreter enabled
[ 0.061542] ACPI: (supports S0 S3 S4 S5)
[ 0.061543] ACPI: Using IOAPIC for interrupt routing
[ 0.061582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.062035] ACPI: GPE 0x62 active on init
[ 0.062052] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.080012] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.080019] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.081274] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.081275] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.082392] PCI host bridge to bus 0000:00
[ 0.082395] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.082396] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.082397] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.082399] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[ 0.082401] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.082411] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.082738] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.082749] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.082755] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.082760] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.083097] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.083107] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[ 0.083455] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.083474] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[ 0.083531] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.083839] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.083861] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[ 0.083928] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.084245] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.084264] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[ 0.084320] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.084624] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.084692] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.085059] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[ 0.085129] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.085495] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.085565] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.085934] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.088000] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[ 0.094676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.094676] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.094676] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.094676] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.094676] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.094676] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.094676] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.094676] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.094676] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[ 0.094676] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.094676] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.094676] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[ 0.094676] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.096271] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.096342] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.096372] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.096399] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[ 0.096417] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[ 0.096517] pci 0000:02:00.0: supports D1 D2
[ 0.096518] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.108027] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.108030] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.108033] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.108302] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[ 0.108410] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[ 0.108704] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.120168] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.120173] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.121399] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.121473] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.121544] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.121614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.121684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.121755] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.121826] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.121899] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.122341] ACPI: EC: interrupt unblocked
[ 0.122349] ACPI: EC: event unblocked
[ 0.122356] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.122357] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.122564] SCSI subsystem initialized
[ 0.122575] libata version 3.00 loaded.
[ 0.122575] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.122575] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.122575] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.122575] vgaarb: loaded
[ 0.122575] ACPI: bus type USB registered
[ 0.122575] usbcore: registered new interface driver usbfs
[ 0.122575] usbcore: registered new interface driver hub
[ 0.122575] usbcore: registered new device driver usb
[ 0.122575] EDAC MC: Ver: 3.0.0
[ 0.122575] PCI: Using ACPI for IRQ routing
[ 0.124376] PCI: pci_cache_line_size set to 64 bytes
[ 0.124690] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.124691] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
[ 0.124692] e820: reserve RAM buffer [mem 0x9c98f000-0x9fffffff]
[ 0.124693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.124694] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 0.128001] NetLabel: Initializing
[ 0.128001] NetLabel: domain hash size = 128
[ 0.128001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.128001] NetLabel: unlabeled traffic allowed by default
[ 0.128315] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.128321] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.130341] clocksource: Switched to clocksource hpet
[ 0.138557] VFS: Disk quotas dquot_6.6.0
[ 0.138574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.138674] AppArmor: AppArmor Filesystem Enabled
[ 0.138703] pnp: PnP ACPI init
[ 0.139403] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.139406] system 00:00: [io 0xffff] has been reserved
[ 0.139407] system 00:00: [io 0xffff] has been reserved
[ 0.139409] system 00:00: [io 0xffff] has been reserved
[ 0.139411] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.139413] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.139420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139478] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.139526] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.139530] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.139595] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.139651] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[ 0.140078] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.140080] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.140082] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.140083] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.140085] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.140087] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.140089] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.140090] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.140092] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.140094] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.140095] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[ 0.140097] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[ 0.140101] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.140452] pnp: PnP ACPI: found 6 devices
[ 0.146409] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.146420] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.146423] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.146425] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.146441] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[ 0.146445] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146448] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.146450] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146452] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.146456] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.146459] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146464] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.146466] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.146470] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.146477] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.146480] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.146487] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.146489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.146490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.146492] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[ 0.146494] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.146495] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[ 0.146496] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.146498] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.146499] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[ 0.146501] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[ 0.146642] NET: Registered protocol family 2
[ 0.146852] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146970] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.147143] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.147178] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.147204] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.147261] NET: Registered protocol family 1
[ 0.147273] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.147368] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.147369] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.168268] PCI: CLS 64 bytes, default 64
[ 0.168301] Unpacking initramfs...
[ 1.028638] Freeing initrd memory: 56192K
[ 1.028686] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[ 1.028691] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[ 1.028704] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.028707] software IO TLB [mem 0x9898f000-0x9c98f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.028903] Scanning for low memory corruption every 60 seconds
[ 1.029504] Initialise system trusted keyrings
[ 1.029513] Key type blacklist registered
[ 1.029547] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.030619] zbud: loaded
[ 1.031090] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.031210] fuse init (API version 7.26)
[ 1.032314] Key type asymmetric registered
[ 1.032315] Asymmetric key parser 'x509' registered
[ 1.032340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.032363] io scheduler noop registered
[ 1.032364] io scheduler deadline registered
[ 1.032402] io scheduler cfq registered (default)
[ 1.033031] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[ 1.033047] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[ 1.033061] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[ 1.033079] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.033141] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 1.033142] vesafb: scrolling: redraw
[ 1.033143] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.033153] vesafb: framebuffer at 0xb0000000, mapped to 0x (ptrval), using 5632k, total 5632k
[ 1.033231] Console: switching to colour frame buffer device 200x56
[ 1.033250] fb0: VESA VGA frame buffer device
[ 1.033263] intel_idle: MWAIT substates: 0x11142120
[ 1.033264] intel_idle: v0.4.1 model 0x3D
[ 1.033435] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.033899] ACPI: AC Adapter [ADP0] (on-line)
[ 1.033956] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.033974] ACPI: Lid Switch [LID0]
[ 1.034005] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.034021] ACPI: Power Button [PWRB]
[ 1.034049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.034062] ACPI: Power Button [PWRF]
[ 1.034442] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.038007] Linux agpgart interface v0.103
[ 1.039333] loop: module loaded
[ 1.039475] libphy: Fixed MDIO Bus: probed
[ 1.039476] tun: Universal TUN/TAP device driver, 1.6
[ 1.039500] PPP generic driver version 2.4.2
[ 1.039533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.039535] ehci-pci: EHCI PCI platform driver
[ 1.039661] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.039666] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.039679] ehci-pci 0000:00:1d.0: debug port 2
[ 1.043590] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.043602] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[ 1.056070] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.056113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.056115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056117] usb usb1: Product: EHCI Host Controller
[ 1.056119] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
[ 1.056120] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.056326] hub 1-0:1.0: USB hub found
[ 1.056333] hub 1-0:1.0: 2 ports detected
[ 1.056487] ehci-platform: EHCI generic platform driver
[ 1.056501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.056504] ohci-pci: OHCI PCI platform driver
[ 1.056512] ohci-platform: OHCI generic platform driver
[ 1.056517] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.056641] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.056642] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 1.056662] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.056668] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.057732] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.057736] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.057852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.057854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.057855] usb usb2: Product: xHCI Host Controller
[ 1.057857] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 1.057858] usb usb2: SerialNumber: 0000:00:14.0
[ 1.058038] hub 2-0:1.0: USB hub found
[ 1.058050] hub 2-0:1.0: 11 ports detected
[ 1.062839] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.062843] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.062849] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.062876] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.062878] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.062879] usb usb3: Product: xHCI Host Controller
[ 1.062880] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 1.062882] usb usb3: SerialNumber: 0000:00:14.0
[ 1.063069] hub 3-0:1.0: USB hub found
[ 1.063076] hub 3-0:1.0: 4 ports detected
[ 1.064774] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.079199] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.079202] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.079402] mousedev: PS/2 mouse device common for all mice
[ 1.079871] rtc_cmos 00:01: RTC can wake from S4
[ 1.079882] rtc_cmos: probe of 00:01 failed with error -16
[ 1.079896] i2c /dev entries driver
[ 1.079941] device-mapper: uevent: version 1.0.3
[ 1.079994] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.080008] intel_pstate: Intel P-state driver initializing
[ 1.080189] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.080527] NET: Registered protocol family 10
[ 1.083536] Segment Routing with IPv6
[ 1.083551] NET: Registered protocol family 17
[ 1.083576] Key type dns_resolver registered
[ 1.083760] RAS: Correctable Errors collector initialized.
[ 1.083782] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[ 1.083820] microcode: Microcode Update Driver: v2.2.
[ 1.083827] sched_clock: Marking stable (1083817426, 0)->(1063419487, 20397939)
[ 1.083977] registered taskstats version 1
[ 1.083984] Loading compiled-in X.509 certificates
[ 1.086123] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[ 1.086138] zswap: loaded using pool lzo/zbud
[ 1.088667] Key type big_key registered
[ 1.088669] Key type trusted registered
[ 1.089874] Key type encrypted registered
[ 1.089876] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.089880] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.089893] evm: HMAC attrs: 0x1
[ 1.090412] Magic number: 14:129:320
[ 1.090415] misc microcode: hash matches
[ 1.090417] platform microcode: hash matches
[ 1.090437] tty tty45: hash matches
[ 1.090478] hctosys: unable to open rtc device (rtc0)
[ 1.090516] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.090517] EDD information not available.
[ 1.092675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.132895] ACPI: Battery Slot [BAT0] (battery present)
[ 1.392028] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.396017] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.456509] Freeing unused kernel memory: 2408K
[ 1.464061] Write protecting the kernel read-only data: 20480k
[ 1.465393] Freeing unused kernel memory: 2008K
[ 1.468652] Freeing unused kernel memory: 1900K
[ 1.473817] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.473818] x86/mm: Checking user space page tables
[ 1.478690] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.546094] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
[ 1.546097] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.546099] usb 2-3: Product: USB Receiver
[ 1.546100] usb 2-3: Manufacturer: Logitech
[ 1.553991] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.553999] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.554018] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.554020] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.554183] hub 1-1:1.0: USB hub found
[ 1.554264] hub 1-1:1.0: 8 ports detected
[ 1.555228] ahci 0000:00:1f.2: version 3.0
[ 1.565155] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
[ 1.565159] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.565494] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.565498] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.566199] scsi host0: ahci
[ 1.566326] scsi host1: ahci
[ 1.566522] scsi host2: ahci
[ 1.566877] scsi host3: ahci
[ 1.566932] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
[ 1.566934] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
[ 1.566935] ata3: DUMMY
[ 1.566936] ata4: DUMMY
[ 1.585097] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.608183] [drm] Memory usable by graphics device = 4096M
[ 1.608197] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[ 1.608198] fb: switching to inteldrmfb from VESA VGA
[ 1.608218] Console: switching to colour dummy device 80x25
[ 1.608302] [drm] Replacing VGA console driver
[ 1.614122] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.614123] [drm] Driver supports precise vblank timestamp query.
[ 1.616101] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.622323] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.623887] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.624228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.657569] fbcon: inteldrmfb (fb0) is primary device
[ 1.657609] Console: switching to colour frame buffer device 200x56
[ 1.657630] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.672057] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.820714] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.820716] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.820718] usb 2-4: Product: USB2.0-CRW
[ 1.820719] usb 2-4: Manufacturer: Generic
[ 1.820720] usb 2-4: SerialNumber: 20100201396000000
[ 1.883843] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.883860] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.885919] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[ 1.888761] ata2.00: configured for UDMA/133
[ 1.948097] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[ 1.998325] ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
[ 1.998327] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.044091] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[ 2.044099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
[ 2.046257] random: fast init done
[ 2.047802] ata1.00: configured for UDMA/133
[ 2.048084] scsi 0:0:0:0: Direct-Access ATA ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
[ 2.048346] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.048369] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.048373] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.048428] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.048470] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.048472] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.048489] sd 0:0:0:0: [sda] Write Protect is off
[ 2.048491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.048523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.050370] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
[ 2.065654] sda: sda1
[ 2.065927] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.120097] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.120099] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.120221] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.120297] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.134996] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[ 2.134998] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.134999] usb 2-6: Product: Lenovo EasyCamera
[ 2.135000] usb 2-6: Manufacturer: J58F5583G
[ 2.135001] usb 2-6: SerialNumber: 200901010001
[ 2.186072] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[ 2.201485] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[ 2.216960] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[ 2.264044] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 2.302869] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 2.413613] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[ 2.413615] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.418892] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.419280] usbcore: registered new interface driver rtsx_usb
[ 2.422320] usbcore: registered new interface driver usbhid
[ 2.422320] usbhid: USB HID core driver
[ 2.423931] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
[ 2.424035] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 2.424176] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
[ 2.484232] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 3.068248] clocksource: Switched to clocksource tsc
[ 35.393512] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 35.531605] random: crng init done
[ 35.531607] random: 7 urandom warning(s) missed due to ratelimiting
[ 37.122294] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.230333] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 37.248121] systemd[1]: Detected architecture x86-64.
[ 37.275565] systemd[1]: Set hostname to <home-B70-80>.
[ 39.327728] systemd[1]: Reached target User and Group Name Lookups.
[ 39.327942] systemd[1]: Created slice User and Session Slice.
[ 39.328150] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 39.328262] systemd[1]: Created slice System Slice.
[ 39.328334] systemd[1]: Listening on udev Control Socket.
[ 39.328380] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 39.328418] systemd[1]: Listening on LVM2 poll daemon socket.
[ 39.982752] lp: driver loaded but no devices found
[ 40.087287] ppdev: user-space parallel port driver
[ 40.219790] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 40.420254] systemd-journald[448]: Received request to flush runtime journal from PID 1
[ 57.323016] audit: type=1400 audit(1535440782.316:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=603 comm="apparmor_parser"
[ 57.323019] audit: type=1400 audit(1535440782.316:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=603 comm="apparmor_parser"
[ 57.324280] audit: type=1400 audit(1535440782.320:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=607 comm="apparmor_parser"
[ 57.324282] audit: type=1400 audit(1535440782.320:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=607 comm="apparmor_parser"
[ 57.324283] audit: type=1400 audit(1535440782.320:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=607 comm="apparmor_parser"
[ 57.325195] audit: type=1400 audit(1535440782.320:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=608 comm="apparmor_parser"
[ 57.380649] audit: type=1400 audit(1535440782.376:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[ 57.380652] audit: type=1400 audit(1535440782.376:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[ 57.380654] audit: type=1400 audit(1535440782.376:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=602 comm="apparmor_parser"
[ 57.380656] audit: type=1400 audit(1535440782.376:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[ 57.812818] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.834823] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[ 57.961616] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 57.971524] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 58.072597] Intel(R) Wireless WiFi driver for Linux
[ 58.072598] Copyright(c) 2003- 2015 Intel Corporation
[ 58.093168] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 58.093169] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 58.093169] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 58.093170] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 58.093170] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 58.144042] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 58.154840] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 58.155140] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 58.155143] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 58.155145] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 58.155147] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 58.155148] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 58.155150] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 58.155152] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 58.155910] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[ 58.158179] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 58.158216] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 58.181792] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 58.181832] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 58.181865] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 58.181898] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 58.181934] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 58.206830] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[ 58.397884] AVX2 version of gcm_enc/dec engaged.
[ 58.397885] AES CTR mode by8 optimization enabled
[ 58.905115] intel_rapl: Found RAPL domain package
[ 58.905116] intel_rapl: Found RAPL domain core
[ 58.905117] intel_rapl: Found RAPL domain uncore
[ 58.905118] intel_rapl: Found RAPL domain dram
[ 58.905121] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 58.905125] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 59.854278] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 59.876786] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
[ 59.992502] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 60.603412] Bluetooth: Core ver 2.22
[ 60.603431] NET: Registered protocol family 31
[ 60.603432] Bluetooth: HCI device and connection manager initialized
[ 60.603435] Bluetooth: HCI socket layer initialized
[ 60.603437] Bluetooth: L2CAP socket layer initialized
[ 60.603442] Bluetooth: SCO socket layer initialized
[ 60.606727] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 60.720334] usbcore: registered new interface driver btusb
[ 60.732704] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[ 60.794335] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[ 60.911677] Bluetooth: hci0: Intel firmware patch completed and activated
[ 61.460161] media: Linux media interface: v0.10
[ 61.558484] Linux video capture interface: v2.00
[ 61.853204] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[ 61.855984] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 61.855986] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 61.855989] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 61.856083] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[ 61.856170] usbcore: registered new interface driver uvcvideo
[ 61.856171] USB Video Class driver (1.1.1)
[ 63.641492] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k FS
[ 65.348864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 65.348866] Bluetooth: BNEP filters: protocol multicast
[ 65.348868] Bluetooth: BNEP socket layer initialized
[ 68.862695] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 69.013931] r8169 0000:02:00.0 enp2s0: link down
[ 69.014025] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 69.053670] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 69.240616] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 69.424526] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 72.759197] wlp3s0: authenticate with a0:64:8f:38:b2:c9
[ 72.765569] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
[ 72.767114] wlp3s0: authenticated
[ 72.768036] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
[ 72.768979] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
[ 72.770256] wlp3s0: associated
[ 72.821321] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 72.857956] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
[ 76.738140] Bluetooth: RFCOMM TTY layer initialized
[ 76.738148] Bluetooth: RFCOMM socket layer initialized
[ 76.738158] Bluetooth: RFCOMM ver 1.11
[ 80.628973] rfkill: input handler disabledHors ligne
#10 Le 28/08/2018, à 09:36
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
J'ai tester la commande: echo "options iwlwifi bt_coex_active=N swcrypto=1 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf
Je ne comprend pas bien l'effet
Hors ligne
#11 Le 28/08/2018, à 09:49
- xubu1957
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
C'est pour modifier un paramètre concernant l'utilisation simultanée du Wifi et du Bluetooth.
Te sers-tu du Bluetooth ?
J'avais trouvé cette page > intel.fr/content/www/fr/fr/support/articles/000005544/network-and-i-o/wireless-networking
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#12 Le 28/08/2018, à 09:56
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
ok, ce que j'avais en tête pour la rtc n'est pas valable...
Comment es tu passé de la 16.04 à la 18.04 : mise à niveau ou une réinstallation à partir d'un support?
Hors ligne
#13 Le 28/08/2018, à 10:46
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Hello,
J'utilise et temps en temps le Bluetooth (2 à 3 fois par année) . Si je peux j'utilise airdroid pour le transfert de fichier
merci pour le lien,les info sont intéressante
Je suis passé de la 16.04 à 18.04 en réalisant une installation compète. durant cette installation le démarrage via la clès USB se fait rapidement et le boot sur le disque est lent c'est laque je me suis penché sur ce problème. Jai même refait l'install sur un autre disque dure mais me problème
après j'ai laisser l'installateur faire les partions du disque dur... ce n'est peut être pas le mieux mais j'ai une erreur d'installation si je le partitionne mois même.
merci
Fabrice
Hors ligne
#14 Le 28/08/2018, à 11:21
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
voila un Fdisk -l
Disque /dev/loop0 : 34.7 MiB, 36323328 octets, 70944 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop1 : 3.7 MiB, 3887104 octets, 7592 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop2 : 140.9 MiB, 147722240 octets, 288520 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop3 : 458.3 MiB, 480579584 octets, 938632 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop4 : 3.7 MiB, 3887104 octets, 7592 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop5 : 44 MiB, 46104576 octets, 90048 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop6 : 87 MiB, 91160576 octets, 178048 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop7 : 14.5 MiB, 15196160 octets, 29680 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/sda : 931.5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x27ca019e
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sda1 * 2048 1953523711 1953521664 931.5G 8e LVM Linux
Disque /dev/mapper/ubuntu--vg-root : 930.4 GiB, 998974160896 octets, 1951121408 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Disque /dev/loop8 : 86.9 MiB, 91115520 octets, 177960 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop9 : 139.5 MiB, 146276352 octets, 285696 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop10 : 477.8 MiB, 501014528 octets, 978544 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop11 : 2.3 MiB, 2428928 octets, 4744 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop12 : 2.3 MiB, 2433024 octets, 4752 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop13 : 199.5 MiB, 209137664 octets, 408472 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop14 : 13 MiB, 13619200 octets, 26600 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop15 : 477.9 MiB, 501075968 octets, 978664 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop16 : 212.1 MiB, 222449664 octets, 434472 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop17 : 13 MiB, 13619200 octets, 26600 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop18 : 141.3 MiB, 148160512 octets, 289376 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop19 : 190 MiB, 199180288 octets, 389024 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop20 : 140 MiB, 146841600 octets, 286800 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop21 : 3.7 MiB, 3813376 octets, 7448 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop22 : 143.1 MiB, 150020096 octets, 293008 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop23 : 207.2 MiB, 217251840 octets, 424320 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop24 : 13 MiB, 13619200 octets, 26600 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop25 : 86.9 MiB, 91099136 octets, 177928 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop26 : 2.3 MiB, 2433024 octets, 4752 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop27 : 14.5 MiB, 15196160 octets, 29680 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop28 : 14.5 MiB, 15196160 octets, 29680 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop29 : 19.9 MiB, 20807680 octets, 40640 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/mapper/ubuntu--vg-swap_1 : 976 MiB, 1023410176 octets, 1998848 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octetsHors ligne
#15 Le 28/08/2018, à 11:26
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Honnêtement, je n'ai pas d'idée pour l'instant.
On peut essayer de regarder ce qu'il y a dans les logs, en commençant par syslog et kern.log. Je te propose la procédure suivante :
sudo logrotate --force /etc/logrotate.conf
rebootpuis une fois la session lancée :
cat /var/log/kern.log
cat /var/log/syslogCe que l'on peut chercher c'est soit une erreur, un warning et un laps de temps important entre 2 lignes dans le log.
Donne aussi le retour de :
dmesg -lerr
dmesg -lwarnCa va remonter les erreurs et les warning de dmesg. (un peu plus facile à lire que le retour complet de dmesg, mais après ça manque d'information)
Hors ligne
#16 Le 28/08/2018, à 11:28
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sda1 * 2048 1953523711 1953521664 931.5G 8e LVM LinuxPourquoi avoir choisi d'utiliser le LVM?
Hors ligne
#17 Le 28/08/2018, à 13:41
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Concernant LVM j'avais penser que cela pourrais être utile par la suite, mais pour le moment aucune utilité...
voici dmesg -lerr
[ 1.032834] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[ 1.032839] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHCvoici dmesg -lwarn
[ 0.028203] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028203] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.151369] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.151371] pci 0000:00:14.0: PCI INT A: no GSI
[ 1.061266] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.061267] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 1.085175] rtc_cmos: probe of 00:01 failed with error -16
[ 1.586402] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 61.435704] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 61.435706] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 61.435707] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 788.539868] kauditd_printk_skb: 55 callbacks suppressedpar contre je ne sais pas comment mettre le fichier Syslog et kern en attachement
donc syslog
Aug 28 12:50:43 home-B70-80 colord[1404]: message repeated 2 times: [ failed to get session [pid 4140]: Aucune donnée disponible]
Aug 28 12:50:44 home-B70-80 rsyslogd: [origin software="rsyslogd" swVersion="8.32.0" x-pid="1317" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Thunderbolt system service...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Authorization Manager...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Manage, Install and Generate Color Profiles...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Session 1 of user fabrice.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped target Bluetooth.
Aug 28 12:50:52 home-B70-80 kernel: [12125.080299] rfkill: input handler enabled
Aug 28 12:50:52 home-B70-80 at-spi-bus-launcher[1703]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
Aug 28 12:50:52 home-B70-80 at-spi-bus-launcher[1703]: after 18795 requests (18795 known processed) with 0 events remaining.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Save/Restore Sound Card State...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping LVM2 PV scan on device 8:1...
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.12' (uid=0 pid=1338 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Stop ureadahead data collection 45s after completed startup.
Aug 28 12:50:52 home-B70-80 bluetoothd[1315]: Endpoint unregistered: sender=:1.46 path=/MediaEndpoint/A2DPSource
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping TLP system startup/shutdown...
Aug 28 12:50:52 home-B70-80 bluetoothd[1315]: Endpoint unregistered: sender=:1.46 path=/MediaEndpoint/A2DPSink
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Daemon for power management...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping ACPI event daemon...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped target Timers.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Trigger anacron every hour.
Aug 28 12:50:52 home-B70-80 systemd[1]: Removed slice system-getty.slice.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Daily apt upgrade and clean activities.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Message of the Day.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped target Sound Card.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Daily apt download activities.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped target Graphical Interface.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Disk Manager...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Accounts Service...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping GNOME Display Manager...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping PackageKit Daemon...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Discard unused blocks once a week.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Location Lookup Service...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Availability of block devices...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping User Manager for UID 1000...
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Authorization Manager.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Manage, Install and Generate Color Profiles.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Thunderbolt system service.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Daemon for power management.
Aug 28 12:50:52 home-B70-80 udisksd[1349]: udisks daemon version 2.7.6 exiting
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Location Lookup Service.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Accounts Service.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped PackageKit Daemon.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Disk Manager.
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Save/Restore Sound Card State.
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activation via systemd failed for unit 'polkit.service': Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 NetworkManager[1338]: <warn> [1535453452.1624] error requesting auth for org.freedesktop.NetworkManager.wifi.share.protected: Authorization check failed: Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 NetworkManager[1338]: <warn> [1535453452.1624] error requesting auth for org.freedesktop.NetworkManager.wifi.share.open: Authorization check failed: Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service' requested by ':1.17' (uid=0 pid=1412 comm="/usr/sbin/gdm3 " label="unconfined")
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activation via systemd failed for unit 'accounts-daemon.service': Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 gdm3: Failed to contact accountsservice: Erreur lors de l’appel de StartServiceByName pour org.freedesktop.Accounts : GDBus.Error:org.freedesktop.systemd1.ShuttingDown: Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 gdm3: GdmDisplay: display lasted 0.001380 seconds
Aug 28 12:50:52 home-B70-80 gdm3: GLib: g_variant_new_string: assertion 'string != NULL' failed
Aug 28 12:50:52 home-B70-80 gnome-terminal-[4102]: gnome-terminal-server: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service' requested by ':1.17' (uid=0 pid=1412 comm="/usr/sbin/gdm3 " label="unconfined")
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activation via systemd failed for unit 'accounts-daemon.service': Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 gdm3: Failed to contact accountsservice: Erreur lors de l’appel de StartServiceByName pour org.freedesktop.Accounts : GDBus.Error:org.freedesktop.systemd1.ShuttingDown: Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 gdm3: Freeing conversation 'gdm-autologin' with active job
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "21"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event2 - Power Button: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "24"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event4 - Video Bus: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "25"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event1 - Power Button: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "26"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event6 - Logitech USB Receiver: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "27"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "28"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "29"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event8 - Ideapad extra buttons: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "30"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event3 - AT Translated Set 2 keyboard: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "31"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event5 - ETPS/2 Elantech Touchpad: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (**) Option "fd" "27"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) event7 - Logitech USB Receiver: device removed
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 blkdeactivate[4183]: Deactivating block devices:
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped GNOME Display Manager.
Aug 28 12:50:52 home-B70-80 gdm3: Unable to read /run/gnome-initial-setup/gnome-initial-setup-uid
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: not releasing fd for 13:71, still in use
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:69
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:67
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:72
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:80
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:71
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:70
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:65
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:68
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) UnloadModule: "libinput"
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) systemd-logind: releasing fd for 13:66
Aug 28 12:50:52 home-B70-80 systemd[1]: Starting Show Plymouth Reboot Screen...
Aug 28 12:50:52 home-B70-80 gdm3: GLib: g_variant_new_string: assertion 'string != NULL' failed
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopping Firmware update daemon...
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service' requested by ':1.17' (uid=0 pid=1412 comm="/usr/sbin/gdm3 " label="unconfined")
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped Firmware update daemon.
Aug 28 12:50:52 home-B70-80 dbus-daemon[1328]: [system] Activation via systemd failed for unit 'accounts-daemon.service': Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 systemd[1]: Received SIGRTMIN+20 from PID 4215 (plymouthd).
Aug 28 12:50:52 home-B70-80 gdm3: Failed to contact accountsservice: Erreur lors de l’appel de StartServiceByName pour org.freedesktop.Accounts : GDBus.Error:org.freedesktop.systemd1.ShuttingDown: Refusing activation, D-Bus is shutting down.
Aug 28 12:50:52 home-B70-80 systemd[1]: Started Show Plymouth Reboot Screen.
Aug 28 12:50:52 home-B70-80 gdm3: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
Aug 28 12:50:52 home-B70-80 systemd[1]: Stopped ACPI event daemon.
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
Aug 28 12:50:52 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
Aug 28 12:50:52 home-B70-80 systemd[1450]: gnome-terminal-server.service: Main process exited, code=exited, status=1/FAILURE
Aug 28 12:50:52 home-B70-80 systemd[1450]: gnome-terminal-server.service: Failed with result 'exit-code'.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped GNOME Terminal Server.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Evolution calendar service...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Evolution address book service...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service - GNOME Online Accounts monitor...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service - digital camera monitor...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem metadata service...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service - disk device monitor...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Evolution source registry...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service - Media Transfer Protocol monitor...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Accessibility services bus...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping D-Bus User Message Bus...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped target Default.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopping Virtual filesystem service - Apple File Conduit monitor...
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Accessibility services bus.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service - disk device monitor.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service - Apple File Conduit monitor.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service - Media Transfer Protocol monitor.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service - GNOME Online Accounts monitor.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service - digital camera monitor.
Aug 28 12:50:52 home-B70-80 systemd[1]: Unmounted /run/user/1000/gvfs.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem metadata service.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped D-Bus User Message Bus.
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Virtual filesystem service.
Aug 28 12:50:52 home-B70-80 tlp[4177]: Applying power save settings...done.
Aug 28 12:50:52 home-B70-80 blkdeactivate[4183]: [SKIP]: unmount of ubuntu--vg-swap_1 (dm-1) mounted on [SWAP]
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Evolution source registry.
Aug 28 12:50:52 home-B70-80 blkdeactivate[4183]: [SKIP]: unmount of ubuntu--vg-root (dm-0) mounted on /
Aug 28 12:50:52 home-B70-80 systemd[1450]: Stopped Evolution address book service.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped Evolution calendar service.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped target Basic System.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped target Timers.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped target Sockets.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed GnuPG network certificate management daemon.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed GnuPG cryptographic agent and passphrase cache (restricted).
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed GnuPG cryptographic agent and passphrase cache.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped target Paths.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Stopped Pending report trigger for Ubuntu Report.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Closed D-Bus User Message Bus Socket.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Reached target Shutdown.
Aug 28 12:50:53 home-B70-80 systemd[1450]: Starting Exit the Session...
Aug 28 12:50:53 home-B70-80 systemd[1450]: Received SIGRTMIN+24 from PID 4273 (kill).
Aug 28 12:50:53 home-B70-80 /usr/lib/gdm3/gdm-x-session[1478]: (II) Server terminated successfully (0). Closing log file.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped User Manager for UID 1000.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped LVM2 PV scan on device 8:1.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped TLP system startup/shutdown.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped Availability of block devices.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped Session 1 of user fabrice.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped target Multi-User System.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Regular background program processing daemon...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping crash report submission daemon...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping irqbalance daemon...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping LSB: Record successful boot for GRUB...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Dispatcher daemon for systemd-networkd...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Thermal Daemon Service...
Aug 28 12:50:53 home-B70-80 thermald[1322]: Terminating ...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping LSB: Speech Dispatcher...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Tool to automatically collect and submit kernel crash signatures...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Make remote CUPS printers available locally...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping TeamViewer remote control daemon...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped Wait until snapd is fully seeded.
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Snappy daemon...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping Modem Manager...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping ClamAV virus database updater...
Aug 28 12:50:53 home-B70-80 snapd[1343]: 2018/08/28 12:50:53.655954 main.go:81: Exiting on terminated signal.
Aug 28 12:50:53 home-B70-80 ModemManager[1340]: <info> Caught signal, shutting down...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopping LSB: automatic crash report generation...
Aug 28 12:50:53 home-B70-80 systemd[1]: Stopped target Login Prompts.
Aug 28 12:52:19 home-B70-80 systemd-modules-load[440]: Inserted module 'lp'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Aug 28 12:52:19 home-B70-80 systemd-modules-load[440]: Inserted module 'ppdev'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] KERNEL supported cpus:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Intel GenuineIntel
Aug 28 12:52:19 home-B70-80 systemd-modules-load[440]: Inserted module 'parport_pc'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] AMD AuthenticAMD
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Centaur CentaurHauls
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Load Kernel Modules.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Kernel Configuration File System...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c98efff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009c98f000-0x000000009ce7efff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting FUSE Control File System...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Apply Kernel Variables...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Apply Kernel Variables.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NX (Execute Disable) protection: active
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] SMBIOS 2.7 present.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Kernel Debug File System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Huge Pages File System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR default type: uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR fixed ranges enabled:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 00000-9FFFF write-back
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] A0000-BFFFF uncachable
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted POSIX Message Queue File System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] C0000-E7FFF write-protect
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] E8000-EFFFF write-combining
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] F0000-FFFFF write-protect
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR variable ranges enabled:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Kernel Configuration File System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted FUSE Control File System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 5 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 6 disabled
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Remount Root and Kernel File Systems.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 7 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 8 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 9 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Load/Save Random Seed...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] total RAM covered: 14800M
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Found optimal setting for mtrr clean up
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Flush Journal to Persistent Storage...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Scanning 1 areas for low memory corruption
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Load/Save Random Seed.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Using GB pages for direct mapping
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b53f000, 0x19b53ffff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b540000, 0x19b540fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b541000, 0x19b541fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b542000, 0x19b542fff] PGTABLE
Aug 28 12:52:19 home-B70-80 lvm[444]: 1 logical volume(s) in volume group "ubuntu-vg" monitored
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b543000, 0x19b543fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b544000, 0x19b544fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b545000, 0x19b545fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b546000, 0x19b546fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b547000, 0x19b547fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b548000, 0x19b548fff] PGTABLE
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/home/fabrice/.local/share/gvfs-metadata/home-d55d56d4.log: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RAMDISK: [mem 0x3122f000-0x3490efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Early table checksum verification disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: XSDT 0x000000009CFD0188 0000CC (v01 LENOVO CB-01 00000001 01000013)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/NetworkManager/dhclient-wlp3s0.conf: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FACS 0x000000009CF7A000 000040
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/updates/tmp.i: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/tmp.ci/conffiles: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/tmp.ci/control: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/tmp.ci/md5sums: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/tmp.ci/postinst: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] No NUMA configuration found
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Zone ranges:
Aug 28 12:52:19 home-B70-80 ureadahead[438]: ureadahead:/var/lib/dpkg/tmp.ci/postrm: Aucun fichier ou dossier de ce type
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Set the console keyboard layout.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started LVM2 metadata daemon.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Create Static Device Nodes in /dev.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting udev Kernel Device Manager...
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Local File Systems (Pre).
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for xnviewmp...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gimp...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-calculator...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for libreoffice, revision 79...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for ffmpeg...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 54...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for libreoffice, revision 80...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-3-26-1604...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 51...
Aug 28 12:52:19 home-B70-80 apparmor[493]: * Starting AppArmor profiles
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gimp...
Aug 28 12:52:19 home-B70-80 apparmor[493]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-characters...
Aug 28 12:52:19 home-B70-80 apparmor[493]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for ffmpeg...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-calculator, revision 199...
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Local File Systems.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting AppArmor initialization...
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Set console font and keymap...
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Clean up any mess left by 0dns-up...
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gtk-common-themes, revision 319...
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gimp...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Device empty
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Movable zone start for each node
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Early memory node ranges
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for core, revision 5145...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000096f79fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x000000009787a000-0x000000009c98efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-logs, revision 40...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] On node 0 totalpages: 2076717
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 21 pages reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for core...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 zone: 9923 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 zone: 635024 pages, LIFO batch:31
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal zone: 22464 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-system-monitor...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Reserved but unavailable: 99 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for ffmpeg, revision 206...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for libreoffice, revision 76...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-3-26-1604...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for skype, revision 51...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9c98f000-0x9ce7efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-3-26-1604, revision 70...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-logs...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-calculator, revision 180...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for core, revision 4917...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-characters, revision 117...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044245
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-logs...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Policy zone: Normal
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounting Mount unit for gnome-characters, revision 103...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Memory: 8024652K/8306868K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 282216K reserved, 0K cma-reserved)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Kernel/User page tables isolation: enabled
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Set console font and keymap.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ftrace: allocating 39121 entries in 153 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Hierarchical RCU implementation.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Tasks RCU enabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-calculator, revision 199.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] vt handoff: transparent VT on vt#1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Console: colour dummy device 80x25
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] console [tty0] enabled
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for xnviewmp.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Core revision 20170831
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] hpet clockevent registered
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-system-monitor, revision 54.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] APIC: Switch to symmetric I/O mode setup
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: Host address width 39
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-characters, revision 117.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gimp.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for ffmpeg, revision 206.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-logs.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.020000] tsc: Fast TSC calibration using PIT
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] tsc: Detected 2394.465 MHz processor
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.93 BogoMIPS (lpj=9577860)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] pid_max: default: 32768 minimum: 301
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Security Framework initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Yama: becoming mindful.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] AppArmor: AppArmor initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028203] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-logs.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028203] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-calculator.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for ffmpeg.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-calculator, revision 180.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-system-monitor, revision 51.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-characters.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for libreoffice, revision 79.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-characters, revision 103.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-3-26-1604.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-logs, revision 40.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for libreoffice, revision 76.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for libreoffice, revision 80.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-3-26-1604, revision 70.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for core, revision 4917.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for core.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for core, revision 5145.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for skype, revision 51.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-3-26-1604.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gnome-system-monitor.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gtk-common-themes, revision 319.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gimp.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for ffmpeg.
Aug 28 12:52:19 home-B70-80 systemd[1]: Mounted Mount unit for gimp.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Clean up any mess left by 0dns-up.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started udev Kernel Device Manager.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Show Plymouth Boot Screen...
Aug 28 12:52:19 home-B70-80 systemd-udevd[605]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 28 12:52:19 home-B70-80 systemd[1]: Created slice system-systemd\x2dbacklight.slice.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Flush Journal to Persistent Storage.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Create Volatile Files and Directories...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028208] mce: CPU supports 7 MCE banks
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028226] process: using mwait in idle threads
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028228] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028229] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028230] Spectre V2 : Mitigation: Full generic retpoline
Aug 28 12:52:19 home-B70-80 systemd-udevd[603]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028231] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028231] Spectre V2 : Enabling Restricted Speculation for firmware calls
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028232] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Aug 28 12:52:19 home-B70-80 kernel: [ 0.034494] Freeing SMP alternatives memory: 36K
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Create Volatile Files and Directories.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036058] TSC deadline timer enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036060] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036122] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036164] ... version: 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036165] ... bit width: 48
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Network Name Resolution...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036165] ... generic registers: 4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036168] ... value mask: 0000ffffffffffff
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Network Time Synchronization...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036168] ... max period: 00007fffffffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036169] ... fixed-purpose events: 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036169] ... event mask: 000000070000000f
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036200] Hierarchical SRCU implementation.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037204] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037215] smp: Bringing up secondary CPUs ...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037283] x86: Booting SMP configuration:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037284] .... node #0, CPUs: #1 #2 #3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smp: Brought up 1 node, 4 CPUs
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Update UTMP about System Boot/Shutdown.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smpboot: Max logical packages: 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smpboot: Total of 4 processors activated (19155.72 BogoMIPS)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044254] devtmpfs: initialized
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Sound Card.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044254] x86/mm: Memory block size: 128MB
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044694] evm: security.selinux
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044695] evm: security.SMACK64
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044695] evm: security.SMACK64EXEC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044696] evm: security.SMACK64TRANSMUTE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044696] evm: security.SMACK64MMAP
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044697] evm: security.apparmor
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044697] evm: security.ima
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044698] evm: security.capability
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Network Time Synchronization.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] pinctrl core: initialized pinctrl subsystem
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target System Time Synchronized.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] RTC time: 10:51:16, date: 08/28/18
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] NET: Registered protocol family 16
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] audit: initializing netlink subsys (disabled)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] audit: type=2000 audit(1535453476.044:1): state=initialized audit_enabled=0 res=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] cpuidle: using governor ladder
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] cpuidle: using governor menu
Aug 28 12:52:19 home-B70-80 systemd-resolved[1086]: Positive Trust Anchors:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] Simple Boot Flag at 0x44 set to 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Aug 28 12:52:19 home-B70-80 systemd-resolved[1086]: . IN DS 19036 8 2 49aac11d7b6f6446702e54a1607371607a1a41855200fd2ce1cdde32f24e8fb5
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] ACPI: bus type PCI registered
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: Using configuration type 1 for base access
Aug 28 12:52:19 home-B70-80 systemd-resolved[1086]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Module Device)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Processor Device)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Processor Aggregator Device)
Aug 28 12:52:19 home-B70-80 systemd-resolved[1086]: Negative trust anchors: 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa corp home internal intranet lan local private test
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Linux-Dell-Video)
Aug 28 12:52:19 home-B70-80 systemd-resolved[1086]: Using system hostname 'home-B70-80'.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Executed 7 blocks of module-level executable AML code
Aug 28 12:52:19 home-B70-80 kernel: [ 0.056030] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057471] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057480] ACPI: SSDT 0xFFFF8B7394928800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057694] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057694] ACPI: SSDT 0xFFFF8B7394E64800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Network Name Resolution.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060173] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060181] ACPI: SSDT 0xFFFF8B73948D7A00 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Host and Network Name Lookups.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060939] ACPI: EC: EC started
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060939] ACPI: EC: interrupt blocked
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061418] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061420] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 12:52:19 home-B70-80 apparmor[493]: ...done.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started AppArmor initialization.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061422] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061422] ACPI: Interpreter enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061466] ACPI: (supports S0 S3 S4 S5)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061467] ACPI: Using IOAPIC for interrupt routing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061508] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061942] ACPI: GPE 0x62 active on init
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061957] ACPI: Enabled 6 GPEs in block 00 to 7F
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Raise network interfaces...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.080684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Aug 28 12:52:19 home-B70-80 kernel: [ 0.080691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.081945] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.081946] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Aug 28 12:52:19 home-B70-80 mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4"
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083069] PCI host bridge to bus 0000:00
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083071] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
Aug 28 12:52:19 home-B70-80 mtp-probe: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3"
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083073] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083074] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083076] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083077] pci_bus 0000:00: root bus resource [bus 00-fe]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083086] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083418] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
Aug 28 12:52:19 home-B70-80 mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6"
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083430] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083436] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
Aug 28 12:52:19 home-B70-80 mtp-probe: bus: 2, device: 2 was not an MTP device
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083441] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083779] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083790] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084143] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084162] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
Aug 28 12:52:19 home-B70-80 mtp-probe: bus: 2, device: 4 was not an MTP device
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084218] pci 0000:00:14.0: PME# supported from D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084528] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084550] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084616] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Raise network interfaces.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084929] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084948] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085003] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085309] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 mtp-probe: bus: 2, device: 3 was not an MTP device
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085745] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085815] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086182] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086251] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086621] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
Aug 28 12:52:19 home-B70-80 systemd-udevd[610]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.087820] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.091298] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
Aug 28 12:52:19 home-B70-80 systemd[1]: Received SIGRTMIN+20 from PID 615 (plymouthd).
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Show Plymouth Boot Screen.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Local Encrypted Volumes.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
Aug 28 12:52:19 home-B70-80 systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting LVM2 PV scan on device 8:1...
Aug 28 12:52:19 home-B70-80 lvm[1289]: 2 logical volume(s) in volume group "ubuntu-vg" now active
Aug 28 12:52:19 home-B70-80 systemd[1]: Found device /dev/mapper/ubuntu--vg-swap_1.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started LVM2 PV scan on device 8:1.
Aug 28 12:52:19 home-B70-80 systemd[1]: Activating swap /dev/mapper/ubuntu--vg-swap_1...
Aug 28 12:52:19 home-B70-80 systemd[1]: Activated swap /dev/mapper/ubuntu--vg-swap_1.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Swap.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target System Initialization.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Message of the Day.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started CUPS Scheduler.
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on CUPS Scheduler.
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on UUID daemon activation socket.
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Daily Cleanup of Temporary Directories.
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on ACPID Listen Socket.
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on D-Bus System Message Bus Socket.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Discard unused blocks once a week.
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Socket activation for snappy daemon.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Daily apt download activities.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Daily apt upgrade and clean activities.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started ACPI Events Check.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Paths.
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Trigger anacron every hour.
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Timers.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: PME# supported from D3hot
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
Aug 28 12:52:19 home-B70-80 systemd[1]: Listening on Socket activation for snappy daemon.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Sockets.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Basic System.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: supports D1 D2
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108028] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting System Logging Service...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108031] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108034] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108303] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108412] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting LSB: automatic crash report generation...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108705] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.124168] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.124172] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125489] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 12:52:19 home-B70-80 cron[1335]: (CRON) INFO (pidfile fd = 3)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125563] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125773] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125982] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126426] ACPI: EC: interrupt unblocked
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126434] ACPI: EC: event unblocked
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Bluetooth service...
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Accounts Service...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126441] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 12:52:19 home-B70-80 systemd[1]: Started Set the CPU Frequency Scaling governor.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126442] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126651] SCSI subsystem initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] libata version 3.00 loaded.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: setting as boot VGA device
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Snappy daemon...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: bridge control possible
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] vgaarb: loaded
Aug 28 12:52:19 home-B70-80 systemd[1]: Reached target Login Prompts.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] ACPI: bus type USB registered
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new interface driver usbfs
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new interface driver hub
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new device driver usb
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] EDAC MC: Ver: 3.0.0
Aug 28 12:52:19 home-B70-80 anacron[1338]: Anacron 2.3 started on 2018-08-28
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] PCI: Using ACPI for IRQ routing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128436] PCI: pci_cache_line_size set to 64 bytes
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128752] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128753] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128754] e820: reserve RAM buffer [mem 0x9c98f000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128755] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128756] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Thermal Daemon Service...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128838] NetLabel: Initializing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128839] NetLabel: domain hash size = 128
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Save/Restore Sound Card State...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128839] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128854] NetLabel: unlabeled traffic allowed by default
Aug 28 12:52:19 home-B70-80 kernel: [ 0.132306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.132312] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Detect the available GPUs and deal with any system changes...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.134333] clocksource: Switched to clocksource hpet
Aug 28 12:52:19 home-B70-80 systemd[1]: Started CUPS Scheduler.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142562] VFS: Disk quotas dquot_6.6.0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142680] AppArmor: AppArmor Filesystem Enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142707] pnp: PnP ACPI init
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143408] system 00:00: [io 0x0680-0x069f] has been reserved
Aug 28 12:52:19 home-B70-80 apport[1311]: * Starting automatic crash report generation: apport
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143413] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 cron[1335]: (CRON) INFO (Running @reboot jobs)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143415] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143416] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143418] system 00:00: [io 0x1800-0x18fe] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143420] system 00:00: [io 0x164e-0x164f] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143426] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143482] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 28 12:52:19 home-B70-80 gpu-manager[1323]: /etc/modprobe.d is not a file
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143531] system 00:02: [io 0x1854-0x1857] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143535] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143597] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143656] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144089] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144091] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144093] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144094] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144096] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144097] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144099] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144101] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144103] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144104] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144106] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144108] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144111] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144462] pnp: PnP ACPI: found 6 devices
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150411] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150423] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
Aug 28 12:52:19 home-B70-80 gpu-manager[1323]: message repeated 2 times: [ /etc/modprobe.d is not a file]
Aug 28 12:52:19 home-B70-80 systemd[1]: Starting Login Service...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150427] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150429] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150445] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150449] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150451] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 avahi-daemon[1315]: Found user 'avahi' (UID 115) and group 'avahi' (GID 122).
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150454] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150457] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150461] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150464] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150469] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150471] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150474] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150481] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150485] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150492] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150494] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150497] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150498] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150500] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150501] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150503] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150504] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150506] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150645] NET: Registered protocol family 2
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150850] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150966] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151139] TCP: Hash tables configured (established 65536 bind 65536)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151173] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151202] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151258] NET: Registered protocol family 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151270] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151369] pci 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151371] pci 0000:00:14.0: PCI INT A: no GSI
Aug 28 12:52:19 home-B70-80 kernel: [ 0.172273] PCI: CLS 64 bytes, default 64
Aug 28 12:52:19 home-B70-80 kernel: [ 0.172306] Unpacking initramfs...
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032784] Freeing initrd memory: 56192K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032834] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032839] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032853] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032855] software IO TLB [mem 0x9898f000-0x9c98f000] (64MB) mapped at [ (ptrval)- (ptrval)]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033050] Scanning for low memory corruption every 60 seconds
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033649] Initialise system trusted keyrings
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033657] Key type blacklist registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033692] workingset: timestamp_bits=36 max_order=21 bucket_order=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.034753] zbud: loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.035222] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Aug 28 12:52:19 home-B70-80 kernel: [ 1.035348] fuse init (API version 7.26)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036511] Key type asymmetric registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036512] Asymmetric key parser 'x509' registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036581] io scheduler noop registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036582] io scheduler deadline registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036622] io scheduler cfq registered (default)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037272] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037290] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037303] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037319] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037389] vesafb: mode is 1600x900x32, linelength=6400, pages=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037389] vesafb: scrolling: redraw
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037391] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037400] vesafb: framebuffer at 0xb0000000, mapped to 0x (ptrval), using 5632k, total 5632k
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037491] Console: switching to colour frame buffer device 200x56
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037510] fb0: VESA VGA frame buffer device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037523] intel_idle: MWAIT substates: 0x11142120
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037523] intel_idle: v0.4.1 model 0x3D
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037694] intel_idle: lapic_timer_reliable_states 0xffffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038150] ACPI: AC Adapter [ADP0] (on-line)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038227] ACPI: Lid Switch [LID0]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038271] ACPI: Power Button [PWRB]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038316] ACPI: Power Button [PWRF]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038712] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 1.041461] Linux agpgart interface v0.103
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042785] loop: module loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042926] libphy: Fixed MDIO Bus: probed
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042927] tun: Universal TUN/TAP device driver, 1.6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042955] PPP generic driver version 2.4.2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042990] ehci-pci: EHCI PCI platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043116] ehci-pci 0000:00:1d.0: EHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043121] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043131] ehci-pci 0000:00:1d.0: debug port 2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.047025] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Aug 28 12:52:19 home-B70-80 kernel: [ 1.047040] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060068] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060443] usb usb1: Product: EHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060444] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060446] usb usb1: SerialNumber: 0000:00:1d.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060702] hub 1-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060741] hub 1-0:1.0: 2 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061095] ehci-platform: EHCI generic platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061110] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061113] ohci-pci: OHCI PCI platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061123] ohci-platform: OHCI generic platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061128] uhci_hcd: USB Universal Host Controller Interface driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061266] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061267] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061286] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061292] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062352] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062356] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062768] usb usb2: Product: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062770] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062771] usb usb2: SerialNumber: 0000:00:14.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062903] hub 2-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062930] hub 2-0:1.0: 11 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067801] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067807] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067836] usb usb3: Product: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067837] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067838] usb usb3: SerialNumber: 0000:00:14.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067926] hub 3-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067932] hub 3-0:1.0: 4 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.069619] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084506] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084510] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084618] mousedev: PS/2 mouse device common for all mice
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085165] rtc_cmos 00:01: RTC can wake from S4
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085175] rtc_cmos: probe of 00:01 failed with error -16
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085189] i2c /dev entries driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085231] device-mapper: uevent: version 1.0.3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085289] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085295] intel_pstate: Intel P-state driver initializing
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085514] ledtrig-cpu: registered to indicate activity on CPUs
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085840] NET: Registered protocol family 10
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088875] Segment Routing with IPv6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088892] NET: Registered protocol family 17
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088916] Key type dns_resolver registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089096] RAS: Correctable Errors collector initialized.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089122] microcode: sig=0x306d4, pf=0x40, revision=0x2b
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089187] microcode: Microcode Update Driver: v2.2.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089194] sched_clock: Marking stable (1089184639, 0)->(1072522072, 16662567)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089345] registered taskstats version 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089351] Loading compiled-in X.509 certificates
Aug 28 12:52:19 home-B70-80 kernel: [ 1.091394] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
Aug 28 12:52:19 home-B70-80 kernel: [ 1.091407] zswap: loaded using pool lzo/zbud
Aug 28 12:52:19 home-B70-80 kernel: [ 1.094225] Key type big_key registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.094229] Key type trusted registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095694] Key type encrypted registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095699] AppArmor: AppArmor sha1 policy hashing enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095702] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095717] evm: HMAC attrs: 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096244] Magic number: 14:515:882
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096308] hctosys: unable to open rtc device (rtc0)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096350] EDD information not available.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.099411] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.136978] ACPI: Battery Slot [BAT0] (battery present)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.396034] usb 1-1: new high-speed USB device number 2 using ehci-pci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.400032] usb 2-3: new full-speed USB device number 2 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.460288] Freeing unused kernel memory: 2408K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.476068] Write protecting the kernel read-only data: 20480k
Aug 28 12:52:19 home-B70-80 kernel: [ 1.477202] Freeing unused kernel memory: 2008K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.480535] Freeing unused kernel memory: 1900K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.485502] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.485503] x86/mm: Checking user space page tables
Aug 28 12:52:19 home-B70-80 kernel: [ 1.490602] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550012] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550014] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550015] usb 2-3: Product: USB Receiver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550016] usb 2-3: Manufacturer: Logitech
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552330] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552486] hub 1-1:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552578] hub 1-1:1.0: 8 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.584495] ahci 0000:00:1f.2: version 3.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.586397] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.586402] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Aug 28 12:52:19 home-B70-80 kernel: [ 1.594848] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
Aug 28 12:52:19 home-B70-80 kernel: [ 1.594851] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595215] scsi host0: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595282] scsi host1: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595350] scsi host2: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595405] scsi host3: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595433] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595435] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595436] ata3: DUMMY
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595436] ata4: DUMMY
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597200] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597202] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597777] r8169 0000:02:00.0 enp2s0: renamed from eth0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612099] [drm] Memory usable by graphics device = 4096M
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612102] checking generic (b0000000 580000) vs hw (b0000000 10000000)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612102] fb: switching to inteldrmfb from VESA VGA
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612117] Console: switching to colour dummy device 80x25
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612197] [drm] Replacing VGA console driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.618138] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug 28 12:52:19 home-B70-80 kernel: [ 1.618139] [drm] Driver supports precise vblank timestamp query.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.620114] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 28 12:52:19 home-B70-80 kernel: [ 1.626708] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.628335] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.628638] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663379] fbcon: inteldrmfb (fb0) is primary device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663426] Console: switching to colour frame buffer device 200x56
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663447] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.676053] usb 2-4: new high-speed USB device number 3 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824358] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824360] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824362] usb 2-4: Product: USB2.0-CRW
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824363] usb 2-4: Manufacturer: Generic
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824364] usb 2-4: SerialNumber: 20100201396000000
Aug 28 12:52:19 home-B70-80 kernel: [ 1.910879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.912942] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 1.914252] ata2.00: configured for UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 1.952024] usb 2-6: new high-speed USB device number 4 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 2.044042] tsc: Refined TSC clocksource calibration: 2394.456 MHz
Aug 28 12:52:19 home-B70-80 kernel: [ 2.044050] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139472] random: fast init done
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139483] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139485] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139487] usb 2-6: Product: Lenovo EasyCamera
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139488] usb 2-6: Manufacturer: J58F5583G
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139490] usb 2-6: SerialNumber: 200901010001
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139714] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139722] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139739] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.223705] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.239286] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
Aug 28 12:52:19 home-B70-80 kernel: [ 2.254967] psmouse serio1: elantech: Elan sample query result 05, 20, 97
Aug 28 12:52:19 home-B70-80 kernel: [ 2.268020] usb 2-7: new full-speed USB device number 5 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 2.328098] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.345906] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
Aug 28 12:52:19 home-B70-80 kernel: [ 2.417391] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
Aug 28 12:52:19 home-B70-80 kernel: [ 2.417393] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 2.422570] hidraw: raw HID events driver (C) Jiri Kosina
Aug 28 12:52:19 home-B70-80 kernel: [ 2.422897] usbcore: registered new interface driver rtsx_usb
Aug 28 12:52:19 home-B70-80 kernel: [ 2.426233] usbcore: registered new interface driver usbhid
Aug 28 12:52:19 home-B70-80 kernel: [ 2.426234] usbhid: USB HID core driver
Aug 28 12:52:19 home-B70-80 kernel: [ 2.427869] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
Aug 28 12:52:19 home-B70-80 kernel: [ 2.427964] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
Aug 28 12:52:19 home-B70-80 kernel: [ 2.428107] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
Aug 28 12:52:19 home-B70-80 kernel: [ 2.488242] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
Aug 28 12:52:19 home-B70-80 kernel: [ 3.068295] clocksource: Switched to clocksource tsc
Aug 28 12:52:19 home-B70-80 kernel: [ 3.258147] ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 3.258149] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 28 12:52:19 home-B70-80 kernel: [ 3.307668] ata1.00: configured for UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 3.307912] scsi 0:0:0:0: Direct-Access ATA ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308252] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308287] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308289] sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308305] sd 0:0:0:0: [sda] Write Protect is off
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 28 12:52:19 home-B70-80 kernel: [ 3.311679] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
Aug 28 12:52:19 home-B70-80 kernel: [ 3.321059] sda: sda1
Aug 28 12:52:19 home-B70-80 kernel: [ 3.321799] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372699] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372701] cdrom: Uniform CD-ROM driver Revision: 3.20
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372880] sr 1:0:0:0: Attached scsi CD-ROM sr0
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372970] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 28 12:52:19 home-B70-80 kernel: [ 36.142134] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 12:52:19 home-B70-80 kernel: [ 36.393000] random: crng init done
Aug 28 12:52:19 home-B70-80 kernel: [ 36.393002] random: 7 urandom warning(s) missed due to ratelimiting
Aug 28 12:52:19 home-B70-80 kernel: [ 37.710119] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 28 12:52:19 home-B70-80 kernel: [ 37.801608] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
Aug 28 12:52:19 home-B70-80 kernel: [ 37.820126] systemd[1]: Detected architecture x86-64.
Aug 28 12:52:19 home-B70-80 kernel: [ 37.847036] systemd[1]: Set hostname to <home-B70-80>.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801043] systemd[1]: Reached target Remote File Systems.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801319] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801452] systemd[1]: Created slice User and Session Slice.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801487] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801493] systemd[1]: Reached target User and Group Name Lookups.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801587] systemd[1]: Created slice System Slice.
Aug 28 12:52:19 home-B70-80 kernel: [ 39.801652] systemd[1]: Listening on Syslog Socket.
Aug 28 12:52:19 home-B70-80 kernel: [ 40.374398] lp: driver loaded but no devices found
Aug 28 12:52:19 home-B70-80 kernel: [ 40.417483] ppdev: user-space parallel port driver
Aug 28 12:52:19 home-B70-80 kernel: [ 40.684999] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
Aug 28 12:52:19 home-B70-80 kernel: [ 40.900918] systemd-journald[449]: Received request to flush runtime journal from PID 1
Aug 28 12:52:19 home-B70-80 kernel: [ 56.684715] audit: type=1400 audit(1535453532.680:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=618 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.684718] audit: type=1400 audit(1535453532.680:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=618 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.685995] audit: type=1400 audit(1535453532.680:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.685999] audit: type=1400 audit(1535453532.680:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.686002] audit: type=1400 audit(1535453532.680:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.686881] audit: type=1400 audit(1535453532.680:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=623 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783796] audit: type=1400 audit(1535453532.776:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783800] audit: type=1400 audit(1535453532.776:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783803] audit: type=1400 audit(1535453532.776:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783805] audit: type=1400 audit(1535453532.776:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 57.006103] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 28 12:52:19 home-B70-80 kernel: [ 57.048800] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
Aug 28 12:52:19 home-B70-80 kernel: [ 57.162007] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180361] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180659] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180661] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180664] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180665] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180666] snd_hda_codec_conexant hdaudioC1D0: inputs:
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180668] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180670] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
Aug 28 12:52:19 home-B70-80 kernel: [ 57.181535] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
Aug 28 12:52:19 home-B70-80 kernel: [ 57.184663] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
Aug 28 12:52:19 home-B70-80 kernel: [ 57.184712] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245636] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245637] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245638] RAPL PMU: hw unit of domain package 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245639] RAPL PMU: hw unit of domain dram 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245639] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374551] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374616] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374669] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374721] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374777] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
Aug 28 12:52:19 home-B70-80 kernel: [ 57.811537] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 28 12:52:19 home-B70-80 kernel: [ 57.813301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 28 12:52:19 home-B70-80 kernel: [ 58.136353] AVX2 version of gcm_enc/dec engaged.
Aug 28 12:52:19 home-B70-80 kernel: [ 58.136354] AES CTR mode by8 optimization enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462951] Bluetooth: Core ver 2.22
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462970] NET: Registered protocol family 31
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462971] Bluetooth: HCI device and connection manager initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462974] Bluetooth: HCI socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462977] Bluetooth: L2CAP socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462982] Bluetooth: SCO socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.580295] usbcore: registered new interface driver btusb
Aug 28 12:52:19 home-B70-80 kernel: [ 58.593585] Bluetooth: hci0: read Intel version: 3707100100012d0d27
Aug 28 12:52:19 home-B70-80 kernel: [ 58.593586] Bluetooth: hci0: Intel device is already patched. patch num: 27
Aug 28 12:52:19 home-B70-80 kernel: [ 59.716014] Intel(R) Wireless WiFi driver for Linux
Aug 28 12:52:19 home-B70-80 kernel: [ 59.716015] Copyright(c) 2003- 2015 Intel Corporation
Aug 28 12:52:19 home-B70-80 kernel: [ 59.841396] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944249] intel_rapl: Found RAPL domain package
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944251] intel_rapl: Found RAPL domain core
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944252] intel_rapl: Found RAPL domain uncore
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944253] intel_rapl: Found RAPL domain dram
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944255] intel_rapl: RAPL package 0 domain package locked by BIOS
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944260] intel_rapl: RAPL package 0 domain dram locked by BIOS
Aug 28 12:52:19 home-B70-80 kernel: [ 60.433939] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
Aug 28 12:52:19 home-B70-80 kernel: [ 60.456057] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
Aug 28 12:52:19 home-B70-80 kernel: [ 60.565760] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Aug 28 12:52:19 home-B70-80 kernel: [ 60.695710] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Aug 28 12:52:19 home-B70-80 kernel: [ 61.014663] media: Linux media interface: v0.10
Aug 28 12:52:19 home-B70-80 kernel: [ 61.099726] Linux video capture interface: v2.00
Aug 28 12:52:19 home-B70-80 kernel: [ 61.433197] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435704] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435706] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435707] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435794] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435867] usbcore: registered new interface driver uvcvideo
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435868] USB Video Class driver (1.1.1)
Aug 28 12:52:19 home-B70-80 kernel: [ 62.888373] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k FS
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873708] Bluetooth: BNEP filters: protocol multicast
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873711] Bluetooth: BNEP socket layer initialized
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting Initialize hardware monitoring sensors...
Aug 28 12:52:21 home-B70-80 speech-dispatcher[1327]: * speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Aug 28 12:52:21 home-B70-80 gpu-manager[1323]: /etc/modprobe.d is not a file
Aug 28 12:52:21 home-B70-80 gpu-manager[1323]: Error: can't open /lib/modules/4.15.0-33-generic/updates/dkms
Aug 28 12:52:21 home-B70-80 gpu-manager[1323]: Error: can't open /lib/modules/4.15.0-33-generic/updates/dkms
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Successfully dropped root privileges.
Aug 28 12:52:21 home-B70-80 apport[1311]: ...done.
Aug 28 12:52:21 home-B70-80 thermald[1321]: 20 CPUID levels; family:model:stepping 0x6:3d:4 (6:61:4)
Aug 28 12:52:21 home-B70-80 thermald[1321]: Polling mode is enabled: 4
Aug 28 12:52:21 home-B70-80 thermald[1321]: sysfs write failed /sys/devices/virtual/powercap/intel-rapl/intel-rapl:0/enabled
Aug 28 12:52:21 home-B70-80 thermald[1321]: sysfs read failed constraint_0_max_power_uw
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting LSB: Speech Dispatcher...
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: avahi-daemon 0.7 starting up.
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting Disk Manager...
Aug 28 12:52:21 home-B70-80 grub-common[1330]: * Recording successful boot for GRUB
Aug 28 12:52:21 home-B70-80 bluetoothd[1313]: Bluetooth daemon 5.48
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting LSB: Record successful boot for GRUB...
Aug 28 12:52:21 home-B70-80 acpid: starting up with netlink and the input layer
Aug 28 12:52:21 home-B70-80 systemd[1]: Started ACPI event daemon.
Aug 28 12:52:21 home-B70-80 dbus-daemon[1342]: [system] AppArmor D-Bus mediation is enabled
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Regular background program processing daemon.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Successfully called chroot().
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting Modem Manager...
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Successfully dropped remaining capabilities.
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Run anacron jobs.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: No service file found in /etc/avahi/services.
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting Dispatcher daemon for systemd-networkd...
Aug 28 12:52:21 home-B70-80 anacron[1338]: Normal exit (0 jobs run)
Aug 28 12:52:21 home-B70-80 systemd[1]: Started ClamAV virus database updater.
Aug 28 12:52:21 home-B70-80 dbus-daemon[1342]: dbus[1342]: Unknown group "power" in message bus configuration file
Aug 28 12:52:21 home-B70-80 rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd. [v8.32.0]
Aug 28 12:52:21 home-B70-80 systemd[1]: Started irqbalance daemon.
Aug 28 12:52:21 home-B70-80 rsyslogd: rsyslogd's groupid changed to 106
Aug 28 12:52:21 home-B70-80 systemd[1]: Started D-Bus System Message Bus.
Aug 28 12:52:21 home-B70-80 rsyslogd: rsyslogd's userid changed to 102
Aug 28 12:52:21 home-B70-80 sensors[1354]: coretemp-isa-0000
Aug 28 12:52:21 home-B70-80 sensors[1354]: Adapter: ISA adapter
Aug 28 12:52:21 home-B70-80 sensors[1354]: Package id 0: +52.0°C (high = +105.0°C, crit = +105.0°C)
Aug 28 12:52:21 home-B70-80 sensors[1354]: Core 0: +51.0°C (high = +105.0°C, crit = +105.0°C)
Aug 28 12:52:21 home-B70-80 sensors[1354]: Core 1: +52.0°C (high = +105.0°C, crit = +105.0°C)
Aug 28 12:52:21 home-B70-80 rsyslogd: [origin software="rsyslogd" swVersion="8.32.0" x-pid="1310" x-info="http://www.rsyslog.com"] start
Aug 28 12:52:21 home-B70-80 bluetoothd[1313]: Starting SDP server
Aug 28 12:52:21 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=1313 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Aug 28 12:52:21 home-B70-80 bluetoothd[1313]: Bluetooth management interface 1.14 initialized
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: New relevant interface lo.IPv6 for mDNS.
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting WPA supplicant...
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Aug 28 12:52:21 home-B70-80 systemd[1]: Starting Network Manager...
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: New relevant interface lo.IPv4 for mDNS.
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Network interface enumeration completed.
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Initialize hardware monitoring sensors.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Registering new address record for ::1 on lo.*.
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Save/Restore Sound Card State.
Aug 28 12:52:21 home-B70-80 avahi-daemon[1315]: Registering new address record for 127.0.0.1 on lo.IPv4.
Aug 28 12:52:21 home-B70-80 systemd[1]: Started Login Service.
Aug 28 12:52:21 home-B70-80 ModemManager[1337]: <info> ModemManager (version 1.6.8) starting in system bus...
Aug 28 12:52:22 home-B70-80 systemd[1]: Started LSB: Speech Dispatcher.
Aug 28 12:52:22 home-B70-80 networkd-dispatcher[1339]: WARNING: systemd-networkd is not running, output will be incomplete.
Aug 28 12:52:22 home-B70-80 acpid: 8 rules loaded
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Aug 28 12:52:22 home-B70-80 acpid: waiting for events: event logging is off
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Bluetooth service.
Aug 28 12:52:22 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.6' (uid=0 pid=1337 comm="/usr/sbin/ModemManager " label="unconfined")
Aug 28 12:52:22 home-B70-80 systemd[1]: Reached target Bluetooth.
Aug 28 12:52:22 home-B70-80 avahi-daemon[1315]: Server startup complete. Host name is home-B70-80.local. Local service cookie is 3271662807.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Make remote CUPS printers available locally.
Aug 28 12:52:22 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 28 12:52:22 home-B70-80 systemd[1]: Started System Logging Service.
Aug 28 12:52:22 home-B70-80 bluetoothd[1313]: Failed to set mode: Blocked through rfkill (0x12)
Aug 28 12:52:22 home-B70-80 systemd[1]: Starting Hostname Service...
Aug 28 12:52:22 home-B70-80 wpa_supplicant[1351]: Successfully initialized wpa_supplicant
Aug 28 12:52:22 home-B70-80 udisksd[1328]: udisks daemon version 2.7.6 starting
Aug 28 12:52:22 home-B70-80 systemd[1]: Started LSB: automatic crash report generation.
Aug 28 12:52:22 home-B70-80 systemd[1]: Starting Authorization Manager...
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Thermal Daemon Service.
Aug 28 12:52:22 home-B70-80 udisksd[1328]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory
Aug 28 12:52:22 home-B70-80 udisksd[1328]: Failed to load the 'mdraid' libblockdev plugin
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Hostname Service.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Detect the available GPUs and deal with any system changes.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Dispatcher daemon for systemd-networkd.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started WPA supplicant.
Aug 28 12:52:22 home-B70-80 polkitd[1384]: started daemon version 0.105 using authority implementation `local' version `0.105'
Aug 28 12:52:22 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Authorization Manager.
Aug 28 12:52:22 home-B70-80 accounts-daemon[1316]: started daemon version 0.6.45
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Accounts Service.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started Modem Manager.
Aug 28 12:52:22 home-B70-80 grub-common[1330]: ...done.
Aug 28 12:52:22 home-B70-80 systemd[1]: Started LSB: Record successful boot for GRUB.
Aug 28 12:52:22 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service' requested by ':1.13' (uid=0 pid=1324 comm="/usr/sbin/cupsd -l " label="/usr/sbin/cupsd (enforce)")
Aug 28 12:52:22 home-B70-80 systemd[1]: Starting Manage, Install and Generate Color Profiles...
Aug 28 12:52:22 home-B70-80 snapd[1320]: AppArmor status: apparmor is enabled and all features are available
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.0177] NetworkManager (version 1.10.6) is starting... (for the first time)
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.0179] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 10-dns-resolved.conf, 20-connectivity-ubuntu.conf, no-mac-addr-change.conf) (run: 10-globally-managed-devices.conf) (etc: default-wifi-powersave-on.conf)
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1534] manager[0x564c23614070]: monitoring kernel firmware directory '/lib/firmware'.
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1534] monitoring ifupdown state file '/run/network/ifstate'.
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1681] hostname: hostname: using hostnamed
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1681] hostname: hostname changed from (none) to "home-B70-80"
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1684] dns-mgr[0x564c2362e940]: init: dns=systemd-resolved, rc-manager=symlink, plugin=systemd-resolved
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1695] rfkill3: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/ieee80211/phy0/rfkill3) (driver iwlwifi)
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1697] rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/rfkill/rfkill0) (platform driver ideapad_acpi)
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1717] manager[0x564c23614070]: rfkill: WiFi hardware radio set enabled
Aug 28 12:52:23 home-B70-80 NetworkManager[1352]: <info> [1535453543.1717] manager[0x564c23614070]: rfkill: WWAN hardware radio set enabled
Aug 28 12:52:23 home-B70-80 systemd[1]: Started Network Manager.
Aug 28 12:52:23 home-B70-80 systemd[1]: Reached target Network.
Aug 28 12:52:23 home-B70-80 systemd[1]: Started Unattended Upgrades Shutdown.
Aug 28 12:52:23 home-B70-80 systemd[1]: Starting Permit User Sessions...
Aug 28 12:52:23 home-B70-80 systemd[1]: Starting Network Manager Wait Online...
Aug 28 12:52:23 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.14' (uid=0 pid=1352 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
Aug 28 12:52:23 home-B70-80 systemd[1]: Starting Network Manager Script Dispatcher Service...
Aug 28 12:52:23 home-B70-80 systemd[1]: Started Permit User Sessions.
Aug 28 12:52:23 home-B70-80 systemd[1]: Starting GNOME Display Manager...
Aug 28 12:52:23 home-B70-80 systemd[1]: Starting Hold until boot process finishes up...
Aug 28 12:52:23 home-B70-80 udisksd[1328]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Aug 28 12:52:23 home-B70-80 systemd[1]: Started Disk Manager.
Aug 28 12:52:23 home-B70-80 systemd[1]: Started GNOME Display Manager.
Aug 28 12:52:24 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Aug 28 12:52:24 home-B70-80 systemd[1]: Started Network Manager Script Dispatcher Service.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0356] init!
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0357] interface-parser: parsing file /etc/network/interfaces
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0357] interface-parser: finished parsing file /etc/network/interfaces
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0357] management mode: unmanaged
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0362] devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/net/enp2s0, iface: enp2s0)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0362] device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/net/enp2s0, iface: enp2s0): no ifupdown configuration found.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0362] devices added (path: /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/wlp3s0, iface: wlp3s0)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0362] device added (path: /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/wlp3s0, iface: wlp3s0): no ifupdown configuration found.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] end _init.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] settings: loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ifupdown.so)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] settings: loaded plugin keyfile: (c) 2007 - 2016 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] (593808576) ... get_connections.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0363] (593808576) ... get_connections (managed=false): return empty list.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0721] keyfile: new connection /etc/NetworkManager/system-connections/home11 (aee269b2-32f7-46e5-a4c2-02b1e980add7,"home11")
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0725] get unmanaged devices count: 0
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0725] manager: rfkill: WiFi disabled by radio killswitch; enabled by state file
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0725] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0726] manager: Networking is enabled by state file
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.0727] dhcp-init: Using DHCP client 'dhclient'
Aug 28 12:52:24 home-B70-80 nm-dispatcher: req:1 'hostname': new request (2 scripts)
Aug 28 12:52:24 home-B70-80 nm-dispatcher: req:1 'hostname': start running ordered scripts...
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2291] Loaded device plugin: NMBondDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2292] Loaded device plugin: NMBridgeDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2292] Loaded device plugin: NMDummyDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2292] Loaded device plugin: NMEthernetDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2292] Loaded device plugin: NMInfinibandDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2293] Loaded device plugin: NMIPTunnelDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2293] Loaded device plugin: NMMacsecDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2293] Loaded device plugin: NMMacvlanDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2293] Loaded device plugin: NMPppDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2293] Loaded device plugin: NMTunDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2294] Loaded device plugin: NMVethDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2294] Loaded device plugin: NMVlanDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.2294] Loaded device plugin: NMVxlanDeviceFactory (internal)
Aug 28 12:52:24 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 28 12:52:24 home-B70-80 systemd[1]: Started Manage, Install and Generate Color Profiles.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.3106] Loaded device plugin: NMTeamFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-team.so)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.3110] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-adsl.so)
Aug 28 12:52:24 home-B70-80 colord[1398]: failed to get session [pid 1324]: Aucune donnée disponible
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.3811] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.3814] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wwan.so)
Aug 28 12:52:24 home-B70-80 colord[1398]: failed to get session [pid 1324]: Aucune donnée disponible
Aug 28 12:52:24 home-B70-80 colord[1398]: failed to get session [pid 1324]: Aucune donnée disponible
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.4710] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wifi.so)
Aug 28 12:52:24 home-B70-80 systemd[1]: Created slice User Slice of fabrice.
Aug 28 12:52:24 home-B70-80 systemd[1]: Starting User Manager for UID 1000...
Aug 28 12:52:24 home-B70-80 systemd[1]: Started Session 1 of user fabrice.
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6775] device (lo): carrier: link connected
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6782] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6793] manager: (enp2s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6803] keyfile: add connection in-memory (c2140a4d-e70e-343d-9e2a-b662dcba07a5,"Connexion filaire 1")
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6806] settings: (enp2s0): created default wired connection 'Connexion filaire 1'
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.6814] device (enp2s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 28 12:52:24 home-B70-80 kernel: [ 68.681742] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.8196] wifi-nl80211: (wlp3s0): using nl80211 for WiFi device control
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.8199] device (wlp3s0): driver supports Access Point (AP) mode
Aug 28 12:52:24 home-B70-80 kernel: [ 68.818106] r8169 0000:02:00.0 enp2s0: link down
Aug 28 12:52:24 home-B70-80 kernel: [ 68.818209] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.8211] manager: (wlp3s0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/3)
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.8220] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.8237] manager: rfkill: WiFi now enabled by radio killswitch
Aug 28 12:52:24 home-B70-80 kernel: [ 68.822305] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:24 home-B70-80 set-cpufreq[1318]: Setting powersave scheduler for all CPUs
Aug 28 12:52:24 home-B70-80 kernel: [ 68.972604] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.9850] bluez: use BlueZ version 5
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.9858] modem-manager: ModemManager available
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.9861] supplicant: wpa_supplicant running
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.9861] device (wlp3s0): supplicant interface state: init -> starting
Aug 28 12:52:24 home-B70-80 NetworkManager[1352]: <info> [1535453544.9887] bluez5: NAP: added interface E4:F8:9C:13:F4:6F
Aug 28 12:52:25 home-B70-80 snapd[1320]: AppArmor status: apparmor is enabled and all features are available
Aug 28 12:52:25 home-B70-80 ModemManager[1337]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0': not supported by any plugin
Aug 28 12:52:25 home-B70-80 ModemManager[1337]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0': not supported by any plugin
Aug 28 12:52:25 home-B70-80 wpa_supplicant[1351]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
Aug 28 12:52:25 home-B70-80 wpa_supplicant[1351]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
Aug 28 12:52:25 home-B70-80 wpa_supplicant[1351]: dbus: Failed to construct signal
Aug 28 12:52:25 home-B70-80 wpa_supplicant[1351]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
Aug 28 12:52:25 home-B70-80 NetworkManager[1352]: <info> [1535453545.3354] device (wlp3s0): supplicant interface state: starting -> ready
Aug 28 12:52:25 home-B70-80 NetworkManager[1352]: <info> [1535453545.3355] device (wlp3s0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Aug 28 12:52:25 home-B70-80 kernel: [ 69.335750] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:25 home-B70-80 snapd[1320]: 2018/08/28 12:52:25.348632 daemon.go:343: started snapd/2.34.3 (series 16; classic) ubuntu/18.04 (amd64) linux/4.15.0-33-generic.
Aug 28 12:52:25 home-B70-80 systemd[1]: Started Snappy daemon.
Aug 28 12:52:25 home-B70-80 systemd[1]: Starting Wait until snapd is fully seeded...
Aug 28 12:52:25 home-B70-80 snapd[1320]: 2018/08/28 12:52:25.354783 autorefresh.go:376: Cannot prepare auto-refresh change: cannot refresh snap-declaration for "skype": Get [url]https://api.snapcraft.io/api/v1/snaps/assertions/snap-declaration/16/QRDEfjn4WJYnm0FzDKwqqRZZI77awQEV?max-format=2[/url]: dial tcp: lookup api.snapcraft.io on 127.0.0.53:53: server misbehaving
Aug 28 12:52:25 home-B70-80 snapd[1320]: 2018/08/28 12:52:25.355709 stateengine.go:101: state ensure error: cannot refresh snap-declaration for "skype": Get [url]https://api.snapcraft.io/api/v1/snaps/assertions/snap-declaration/16/QRDEfjn4WJYnm0FzDKwqqRZZI77awQEV?max-format=2[/url]: dial tcp: lookup api.snapcraft.io on 127.0.0.53:53: server misbehaving
Aug 28 12:52:25 home-B70-80 systemd[1]: Started Wait until snapd is fully seeded.
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> ClamAV update process started at Tue Aug 28 12:52:25 2018
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> ^Can't query current.cvd.clamav.net
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> ^Invalid DNS reply. Falling back to HTTP mode.
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> Reading CVD header (main.cvd): Tue Aug 28 12:52:25 2018 -> ^Can't get information about db.local.clamav.net: Name or service not known
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> ^Can't read main.cvd header from db.local.clamav.net (IP: )
Aug 28 12:52:25 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:25 2018 -> Trying again in 5 secs...
Aug 28 12:52:25 home-B70-80 systemd[1443]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Aug 28 12:52:26 home-B70-80 systemd[1443]: Starting D-Bus User Message Bus Socket.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Aug 28 12:52:26 home-B70-80 systemd[1443]: Listening on GnuPG network certificate management daemon.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Started Pending report trigger for Ubuntu Report.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Reached target Paths.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (--) Log file renamed from "/home/fabrice/.local/share/xorg/Xorg.pid-1496.log" to "/home/fabrice/.local/share/xorg/Xorg.0.log"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: X.Org X Server 1.19.6
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Release Date: 2017-12-20
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: X Protocol Version 11, Revision 0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Build Operating System: Linux 4.4.0-119-generic x86_64 Ubuntu
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Current Operating System: Linux home-B70-80 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 x86_64
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Build Date: 13 April 2018 08:07:36PM
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: xorg-server 2:1.19.6-1ubuntu4 (For technical support please see [url]http://www.ubuntu.com/support)[/url]
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Current version of pixman: 0.34.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Before reporting problems, check [url]http://wiki.x.org[/url]
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011to make sure that you have the latest version.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: Markers: (--) probed, (**) from config file, (==) default setting,
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011(++) from command line, (!!) notice, (II) informational,
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Log file: "/home/fabrice/.local/share/xorg/Xorg.0.log", Time: Tue Aug 28 12:52:25 2018
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) No Layout section. Using the first Screen section.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) No screen section available. Using defaults.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) |-->Screen "Default Screen Section" (0)
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) | |-->Monitor "<default monitor>"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) No monitor specified for screen "Default Screen Section".
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Using a default monitor configuration.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Automatically adding devices
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Automatically enabling devices
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Automatically adding GPU devices
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Automatically binding GPU devices
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Max clients allowed: 256, resource mask: 0x1fffff
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Entry deleted from font path.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Entry deleted from font path.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Entry deleted from font path.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Entry deleted from font path.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Listening on GnuPG cryptographic agent and passphrase cache.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Entry deleted from font path.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) FontPath set to:
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011/usr/share/fonts/X11/misc,
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011/usr/share/fonts/X11/Type1,
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011built-ins
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) ModulePath set to "/usr/lib/xorg/modules"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) The server relies on udev to provide the list of input devices.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011If no devices become available, reconfigure udev or disable AutoAddDevices.
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loader magic: 0x55d4ae13d020
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module ABI versions:
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011X.Org ANSI C Emulation: 0.4
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011X.Org Video Driver: 23.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011X.Org XInput driver : 24.1
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011X.Org Server Extension : 10.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (++) using VT number 1
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) xfree86: Adding drm device (/dev/dri/card0)
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (--) PCI:*(0:0:2:0) 8086:1616:17aa:3987 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "glx"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module glx: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 1.0.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org Server Extension, version 10.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Matched modesetting as autoconfigured driver 0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Matched fbdev as autoconfigured driver 1
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Matched vesa as autoconfigured driver 2
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Assigned the driver to the xf86ConfigLayout
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "modesetting"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module modesetting: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 1.19.6
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Module class: X.Org Video Driver
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org Video Driver, version 23.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "fbdev"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module fbdev: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.3, module version = 0.4.4
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Module class: X.Org Video Driver
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org Video Driver, version 23.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "vesa"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module vesa: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.3, module version = 2.3.4
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Module class: X.Org Video Driver
Aug 28 12:52:26 home-B70-80 systemd[1443]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org Video Driver, version 23.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modesetting: Driver for Modesetting Kernel Drivers: kms
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) FBDEV: driver for framebuffer: fbdev
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) VESA: driver for VESA chipsets: vesa
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): using drv /dev/dri/card0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) Falling back to old probe method for fbdev
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading sub module "fbdevhw"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "fbdevhw"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module fbdevhw: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 0.0.2
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org Video Driver, version 23.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (EE) open /dev/fb0: Permission denied
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) Falling back to old probe method for vesa
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Creating default Display subsection in Screen section
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011"Default Screen Section" for depth/fbbpp 24/32
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): Depth 24, (==) framebuffer bpp 32
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): RGB weight 888
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): Default visual is TrueColor
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading sub module "glamoregl"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "glamoregl"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module glamoregl: vendor="X.Org Foundation"
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 1.0.0
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org ANSI C Emulation, version 0.4
Aug 28 12:52:26 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) glamor: OpenGL accelerated X.org driver based.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Reached target Timers.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Listening on D-Bus User Message Bus Socket.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Reached target Sockets.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Reached target Basic System.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Reached target Default.
Aug 28 12:52:26 home-B70-80 systemd[1443]: Startup finished in 979ms.
Aug 28 12:52:26 home-B70-80 systemd[1]: Started User Manager for UID 1000.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) glamor: EGL version 1.4 (DRI2):
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): glamor initialized
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output eDP-1 has no monitor section
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output HDMI-1 has no monitor section
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output DP-1 has no monitor section
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output HDMI-2 has no monitor section
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID for output eDP-1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Manufacturer: CMN Model: 1721 Serial#: 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Year: 2015 Week: 3
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID Version: 1.4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Digital Display Input
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): 6 bits per channel
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Digital interface is DisplayPort
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Gamma: 2.20
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): No DPMS capabilities specified
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Supported color encodings: RGB 4:4:4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): First detailed timing is preferred mode
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Preferred mode is native pixel format and refresh rate
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): redX: 0.627 redY: 0.337 greenX: 0.317 greenY: 0.578
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): blueX: 0.156 blueY: 0.074 whiteX: 0.313 whiteY: 0.329
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Manufacturer's mask: 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Supported detailed timing:
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): clock: 107.8 MHz Image Size: 382 x 214 mm
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1940 h_border: 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): N173FGE-E13
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): CMN
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): N173FGE-E13
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID (in hex):
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #01100ffffffffffff000dae211700000000
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #0110319010495261578029405a056519428
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #01113505400000001010101010101010101
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #0110101010101011c2a405461841a303020
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #01135007ed610000018000000fe004e3137
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #011334647452d4531330a20000000fe0043
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #0114d4e0a202020202020202020000000fe
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): #011004e3137334647452d4531330a2000c3
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Printing probed modes for output eDP-1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x60.0 107.80 1600 1648 1680 1940 900 903 908 926 -hsync -vsync (55.6 kHz eP)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID for output HDMI-1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID for output DP-1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID for output HDMI-2
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output eDP-1 connected
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output HDMI-1 disconnected
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output DP-1 disconnected
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output HDMI-2 disconnected
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Using exact sizes for initial modes
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Output eDP-1 using initial mode 1600x900 +0+0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): DPI set to (96, 96)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading sub module "fb"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "fb"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/libfb.so
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module fb: vendor="X.Org Foundation"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 1.0.0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org ANSI C Emulation, version 0.4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) UnloadModule: "fbdev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Unloading fbdev
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) UnloadSubModule: "fbdevhw"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Unloading fbdevhw
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) UnloadModule: "vesa"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Unloading vesa
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) Depth 24 pixmap format is 32 bpp
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): Backing store enabled
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): Silken mouse enabled
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (==) modeset(0): DPMS enabled
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): [DRI2] Setup complete
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): [DRI2] DRI driver: i965
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): [DRI2] VDPAU driver: i965
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (--) RandR disabled
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) SELinux: Disabled on system
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_ARB_create_context
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_ARB_create_context_profile
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_INTEL_swap_event
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_SGI_swap_control
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_ARB_fbconfig_float
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: enabled GLX_ARB_create_context_robustness
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) AIGLX: Loaded and initialized i965
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) GLX: Initialized DRI2 GL provider for screen 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Damage tracking initialized
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Setting screen physical size to 423 x 238
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Power Button (/dev/input/event2)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Power Button: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) LoadModule: "libinput"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Module libinput: vendor="X.Org Foundation"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011compiled for 1.19.6, module version = 0.27.1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011Module class: X.Org XInput Driver
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: #011ABI class: X.Org XInput driver, version 24.1
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Power Button'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Power Button: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event2"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event2 - Power Button: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event2 - Power Button: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event2 - Power Button: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event2 - Power Button: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event2 - Power Button: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Video Bus (/dev/input/event4)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Video Bus: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Video Bus'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Video Bus: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event4"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event4 - Video Bus: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event4 - Video Bus: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event4 - Video Bus: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event4 - Video Bus: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event4 - Video Bus: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Power Button (/dev/input/event1)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Power Button: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Power Button'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Power Button: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event1"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event1 - Power Button: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event1 - Power Button: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event1 - Power Button: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event1 - Power Button: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event1 - Power Button: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event14)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event15)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Logitech USB Receiver'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event6"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event6 - Logitech USB Receiver: is tagged by udev as: Mouse
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event6 - Logitech USB Receiver: device is a pointer
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event6 - Logitech USB Receiver: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7/event6"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "AccelerationScheme" "none"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) selected scheme none/0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event6 - Logitech USB Receiver: is tagged by udev as: Mouse
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event6 - Logitech USB Receiver: device is a pointer
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Logitech USB Receiver'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 27 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event7"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event7 - Logitech USB Receiver: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event7 - Logitech USB Receiver: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event7 - Logitech USB Receiver: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) libinput: Logitech USB Receiver: needs a virtual subdevice
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8/event7"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "AccelerationScheme" "none"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) selected scheme none/0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event7 - Logitech USB Receiver: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event7 - Logitech USB Receiver: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event16)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 28 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event16"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17/event16"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 11)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Ideapad extra buttons'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 29 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Ideapad extra buttons: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event8"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event8 - Ideapad extra buttons: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event8 - Ideapad extra buttons: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9/event8"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event8 - Ideapad extra buttons: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) AT Translated Set 2 keyboard: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event3"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event3 - AT Translated Set 2 keyboard: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) ETPS/2 Elantech Touchpad: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event5"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "server/udev"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event5 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event5 - ETPS/2 Elantech Touchpad: device is a touchpad
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event5 - ETPS/2 Elantech Touchpad: device removed
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "AccelerationScheme" "none"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event5 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) event5 - ETPS/2 Elantech Touchpad: device is a touchpad
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) No input driver specified, ignoring this device.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) This device may have been added with another device file.
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) Using input driver 'libinput' for 'Logitech USB Receiver'
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Logitech USB Receiver: always reports core events
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "Device" "/dev/input/event7"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "_source" "_driver/libinput"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) libinput: Logitech USB Receiver: is a virtual subdevice
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8/event7"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 15)
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_model" "pc105"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_layout" "ch"
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (**) Option "xkb_variant" "fr"
Aug 28 12:52:27 home-B70-80 systemd[1443]: Started D-Bus User Message Bus.
Aug 28 12:52:27 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] AppArmor D-Bus mediation is enabled
Aug 28 12:52:27 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: /etc/gdm3/Xsession: Beginning session setup...
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6489] policy: auto-activating connection 'home11'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6499] device (wlp3s0): Activation: starting connection 'home11' (aee269b2-32f7-46e5-a4c2-02b1e980add7)
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6502] device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6503] manager: NetworkManager state is now CONNECTING
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6508] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6510] device (wlp3s0): Activation: (wifi) access point 'home11' has security, but secrets are required.
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6510] device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6510] sup-iface[0x564c235e7240,wlp3s0]: wps: type pbc start...
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6539] device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6541] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6543] device (wlp3s0): Activation: (wifi) connection 'home11' has security, and secrets exist. No new secrets needed.
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'ssid' value 'home11'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'scan_ssid' value '1'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'bgscan' value 'simple:30:-80:86400'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'key_mgmt' value 'WPA-PSK'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'auth_alg' value 'OPEN'
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6544] Config: added 'psk' value '<hidden>'
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: SME: Trying to authenticate with a0:64:8f:38:b2:c9 (SSID='home11' freq=5180 MHz)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.661808] wlp3s0: authenticate with a0:64:8f:38:b2:c9
Aug 28 12:52:28 home-B70-80 kernel: [ 72.667808] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6685] device (wlp3s0): supplicant interface state: ready -> authenticating
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: Trying to associate with a0:64:8f:38:b2:c9 (SSID='home11' freq=5180 MHz)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.669275] wlp3s0: authenticated
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6747] device (wlp3s0): supplicant interface state: authenticating -> associating
Aug 28 12:52:28 home-B70-80 kernel: [ 72.676053] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.677388] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: Associated with a0:64:8f:38:b2:c9
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE
Aug 28 12:52:28 home-B70-80 kernel: [ 72.688831] wlp3s0: associated
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.6946] device (wlp3s0): supplicant interface state: associating -> associated
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.7093] device (wlp3s0): supplicant interface state: associated -> 4-way handshake
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: WPA: Key negotiation completed with a0:64:8f:38:b2:c9 [PTK=CCMP GTK=CCMP]
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to a0:64:8f:38:b2:c9 completed [id=0 id_str=]
Aug 28 12:52:28 home-B70-80 kernel: [ 72.718440] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.7236] device (wlp3s0): supplicant interface state: 4-way handshake -> completed
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.7236] device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'home11'.
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.7237] device (wlp3s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.7369] dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
Aug 28 12:52:28 home-B70-80 wpa_supplicant[1351]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=9999 txrate=6000
Aug 28 12:52:28 home-B70-80 kernel: [ 72.761848] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
Aug 28 12:52:28 home-B70-80 NetworkManager[1352]: <info> [1535453548.8527] dhcp4 (wlp3s0): dhclient started with pid 1531
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: localuser:fabrice being added to access control list
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting DISPLAY=:0
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XAUTHORITY=/run/user/1000/gdm/Xauthority
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: localuser:fabrice being added to access control list
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting CLUTTER_IM_MODULE=xim
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting LANG=fr_CH.UTF-8
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting DISPLAY=:0
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting USERNAME=fabrice
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting USER=fabrice
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting DESKTOP_SESSION=ubuntu
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting QT4_IM_MODULE=xim
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting TEXTDOMAINDIR=/usr/share/locale/
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting PWD=/home/fabrice
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting HOME=/home/fabrice
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting TEXTDOMAIN=im-config
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_SESSION_TYPE=x11
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_SESSION_DESKTOP=ubuntu
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting WINDOWPATH=1
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting SHELL=/bin/bash
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting QT_IM_MODULE=ibus
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XMODIFIERS=@im=ibus
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting IM_CONFIG_PHASE=2
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_CURRENT_DESKTOP=ubuntu:GNOME
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting SHLVL=1
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting GDMSESSION=ubuntu
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting LOGNAME=fabrice
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XAUTHORITY=/run/user/1000/gdm/Xauthority
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting XDG_CONFIG_DIRS=/etc/xdg/xdg-ubuntu:/etc/xdg
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting GTK_IM_MODULE=ibus
Aug 28 12:52:29 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: dbus-update-activation-environment: setting _=/usr/bin/dbus-update-activation-environment
Aug 28 12:52:29 home-B70-80 dhclient[1531]: DHCPREQUEST of 192.168.1.116 on wlp3s0 to 255.255.255.255 port 67 (xid=0x7e2292d4)
Aug 28 12:52:29 home-B70-80 dhclient[1531]: DHCPACK of 192.168.1.116 from 192.168.1.1
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): address 192.168.1.116
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): plen 24 (255.255.255.0)
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): gateway 192.168.1.1
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): lease time 86400
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): nameserver '192.168.1.1'
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): domain name 'home'
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5861] dhcp4 (wlp3s0): state changed unknown -> bound
Aug 28 12:52:29 home-B70-80 avahi-daemon[1315]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.1.116.
Aug 28 12:52:29 home-B70-80 avahi-daemon[1315]: New relevant interface wlp3s0.IPv4 for mDNS.
Aug 28 12:52:29 home-B70-80 avahi-daemon[1315]: Registering new address record for 192.168.1.116 on wlp3s0.IPv4.
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5876] device (wlp3s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5882] device (wlp3s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5885] device (wlp3s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.5886] manager: NetworkManager state is now CONNECTED_LOCAL
Aug 28 12:52:29 home-B70-80 dhclient[1531]: bound to 192.168.1.116 -- renewal in 34277 seconds.
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.7066] manager: NetworkManager state is now CONNECTED_SITE
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.7067] policy: set 'home11' (wlp3s0) as default for IPv4 routing and DNS
Aug 28 12:52:29 home-B70-80 NetworkManager[1352]: <info> [1535453549.7070] device (wlp3s0): Activation: successful, device activated.
Aug 28 12:52:29 home-B70-80 nm-dispatcher: req:2 'up' [wlp3s0]: new request (2 scripts)
Aug 28 12:52:29 home-B70-80 nm-dispatcher: req:2 'up' [wlp3s0]: start running ordered scripts...
Aug 28 12:52:30 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:30 2018 -> ClamAV update process started at Tue Aug 28 12:52:30 2018
Aug 28 12:52:30 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:30 2018 -> main.cvd is up to date (version: 58, sigs: 4566249, f-level: 60, builder: sigmgr)
Aug 28 12:52:30 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:30 2018 -> daily.cld is up to date (version: 24880, sigs: 2066436, f-level: 63, builder: neo)
Aug 28 12:52:30 home-B70-80 freshclam[1340]: Tue Aug 28 12:52:30 2018 -> bytecode.cld is up to date (version: 327, sigs: 91, f-level: 63, builder: neo)
Aug 28 12:52:30 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.6' (uid=1000 pid=1625 comm="/usr/lib/gnome-session/gnome-session-check-acceler" label="unconfined")
Aug 28 12:52:30 home-B70-80 systemd[1443]: Starting Accessibility services bus...
Aug 28 12:52:30 home-B70-80 avahi-daemon[1315]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::2557:b33f:ae71:b82c.
Aug 28 12:52:30 home-B70-80 avahi-daemon[1315]: New relevant interface wlp3s0.IPv6 for mDNS.
Aug 28 12:52:30 home-B70-80 avahi-daemon[1315]: Registering new address record for fe80::2557:b33f:ae71:b82c on wlp3s0.*.
Aug 28 12:52:30 home-B70-80 NetworkManager[1352]: <info> [1535453550.8186] manager: startup complete
Aug 28 12:52:30 home-B70-80 systemd[1]: Started Network Manager Wait Online.
Aug 28 12:52:30 home-B70-80 systemd[1]: Reached target Network is Online.
Aug 28 12:52:30 home-B70-80 systemd[1]: Starting TeamViewer remote control daemon...
Aug 28 12:52:30 home-B70-80 systemd[1]: Starting Tool to automatically collect and submit kernel crash signatures...
Aug 28 12:52:30 home-B70-80 systemd[1]: Started crash report submission daemon.
Aug 28 12:52:30 home-B70-80 systemd[1]: kerneloops.service: Found left-over process 1697 (kerneloops) in control group while starting unit. Ignoring.
Aug 28 12:52:30 home-B70-80 systemd[1]: This usually indicates unclean termination of a previous run, or service implementation deficiencies.
Aug 28 12:52:30 home-B70-80 systemd[1]: Started Tool to automatically collect and submit kernel crash signatures.
Aug 28 12:52:30 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.a11y.Bus'
Aug 28 12:52:30 home-B70-80 systemd[1443]: Started Accessibility services bus.
Aug 28 12:52:30 home-B70-80 at-spi-bus-launcher[1693]: dbus-daemon[1704]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1625 comm="/usr/lib/gnome-session/gnome-session-check-acceler" label="unconfined")
Aug 28 12:52:30 home-B70-80 at-spi-bus-launcher[1693]: dbus-daemon[1704]: Successfully activated service 'org.a11y.atspi.Registry'
Aug 28 12:52:30 home-B70-80 at-spi-bus-launcher[1693]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Aug 28 12:52:30 home-B70-80 NetworkManager[1352]: <info> [1535453550.9970] manager: NetworkManager state is now CONNECTED_GLOBAL
Aug 28 12:52:30 home-B70-80 nm-dispatcher: req:3 'connectivity-change': new request (2 scripts)
Aug 28 12:52:31 home-B70-80 nm-dispatcher: req:3 'connectivity-change': start running ordered scripts...
Aug 28 12:52:31 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.ScreenSaver' requested by ':1.19' (uid=1000 pid=1505 comm="/usr/lib/gnome-session/gnome-session-binary --sess" label="unconfined")
Aug 28 12:52:31 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.21' (uid=1000 pid=1717 comm="/usr/bin/gnome-screensaver --no-daemon " label="unconfined")
Aug 28 12:52:31 home-B70-80 systemd[1443]: Starting Virtual filesystem service...
Aug 28 12:52:31 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.Daemon'
Aug 28 12:52:31 home-B70-80 systemd[1443]: Started Virtual filesystem service.
Aug 28 12:52:31 home-B70-80 NetworkManager[1352]: <info> [1535453551.3239] dhcp6 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
Aug 28 12:52:31 home-B70-80 NetworkManager[1352]: <info> [1535453551.3256] dhcp6 (wlp3s0): dhclient started with pid 1727
Aug 28 12:52:31 home-B70-80 NetworkManager[1352]: <info> [1535453551.3268] policy: set 'home11' (wlp3s0) as default for IPv6 routing and DNS
Aug 28 12:52:31 home-B70-80 gnome-screensav[1717]: Couldn't get presence status: The name org.gnome.SessionManager was not provided by any .service files
Aug 28 12:52:31 home-B70-80 systemd[1]: teamviewerd.service: Can't open PID file /var/run/teamviewerd.pid (yet?) after start: No such file or directory
Aug 28 12:52:31 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.ScreenSaver'
Aug 28 12:52:31 home-B70-80 systemd[1]: Started TeamViewer remote control daemon.
Aug 28 12:52:31 home-B70-80 gnome-keyring-ssh.desktop[1741]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Aug 28 12:52:31 home-B70-80 gnome-keyring-pkcs11.desktop[1743]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Aug 28 12:52:31 home-B70-80 gnome-keyring-secrets.desktop[1744]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Aug 28 12:52:31 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 1010ms.
Aug 28 12:52:32 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.38' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:32 home-B70-80 systemd[1]: Starting Daemon for power management...
Aug 28 12:52:32 home-B70-80 avahi-daemon[1315]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address fe80::2557:b33f:ae71:b82c.
Aug 28 12:52:32 home-B70-80 avahi-daemon[1315]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address 2a02:1205:5007:40f0:d576:ff8a:92db:6301.
Aug 28 12:52:32 home-B70-80 avahi-daemon[1315]: Registering new address record for 2a02:1205:5007:40f0:d576:ff8a:92db:6301 on wlp3s0.*.
Aug 28 12:52:32 home-B70-80 avahi-daemon[1315]: Withdrawing address record for fe80::2557:b33f:ae71:b82c on wlp3s0.
Aug 28 12:52:33 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 2010ms.
Aug 28 12:52:33 home-B70-80 avahi-daemon[1315]: Registering new address record for 2a02:1205:5007:40f0:2d3:8b1c:b31c:8567 on wlp3s0.*.
Aug 28 12:52:33 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 28 12:52:33 home-B70-80 systemd[1]: Started Daemon for power management.
Aug 28 12:52:33 home-B70-80 whoopsie[1696]: [12:52:33] Using lock path: /var/lock/whoopsie/lock
Aug 28 12:52:33 home-B70-80 whoopsie[1696]: [12:52:33] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/1
Aug 28 12:52:33 home-B70-80 whoopsie[1696]: [12:52:33] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/1
Aug 28 12:52:33 home-B70-80 whoopsie[1696]: [12:52:33] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/1
Aug 28 12:52:33 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): EDID vendor "CMN", prod id 5921
Aug 28 12:52:33 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Printing DDC gathered Modelines:
Aug 28 12:52:33 home-B70-80 /usr/lib/gdm3/gdm-x-session[1494]: (II) modeset(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1940 900 903 908 926 -hsync -vsync (55.6 kHz eP)
Aug 28 12:52:34 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.42' (uid=1000 pid=1799 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined")
Aug 28 12:52:34 home-B70-80 systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Aug 28 12:52:34 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 28 12:52:34 home-B70-80 systemd[1]: Started RealtimeKit Scheduling Policy Service.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully called chroot.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully dropped privileges.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully limited resources.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Running.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Watchdog thread running.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Canary thread running.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully made thread 1799 of process 1799 (n/a) owned by '1000' high priority at nice level -11.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Supervising 1 threads of 1 processes of 1 users.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Supervising 1 threads of 1 processes of 1 users.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully made thread 1803 of process 1799 (n/a) owned by '1000' RT at priority 5.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Supervising 2 threads of 1 processes of 1 users.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Supervising 2 threads of 1 processes of 1 users.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Successfully made thread 1804 of process 1799 (n/a) owned by '1000' RT at priority 5.
Aug 28 12:52:34 home-B70-80 rtkit-daemon[1800]: Supervising 3 threads of 1 processes of 1 users.
Aug 28 12:52:34 home-B70-80 bluetoothd[1313]: Endpoint registered: sender=:1.46 path=/MediaEndpoint/A2DPSource
Aug 28 12:52:34 home-B70-80 bluetoothd[1313]: Endpoint registered: sender=:1.46 path=/MediaEndpoint/A2DPSink
Aug 28 12:52:34 home-B70-80 pulseaudio[1799]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
Aug 28 12:52:34 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 4070ms.
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960620] Bluetooth: RFCOMM TTY layer initialized
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960624] Bluetooth: RFCOMM socket layer initialized
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960629] Bluetooth: RFCOMM ver 1.11
Aug 28 12:52:35 home-B70-80 gnome-screensav[1717]: Lost the name, shutting down.
Aug 28 12:52:36 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.freedesktop.portal.IBus' requested by ':1.28' (uid=1000 pid=1818 comm="ibus-daemon --xim --panel disable " label="unconfined")
Aug 28 12:52:36 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.freedesktop.portal.IBus'
Aug 28 12:52:36 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.Shell.CalendarServer' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:37 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.GeoClue2' unit='geoclue.service' requested by ':1.38' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:37 home-B70-80 systemd[1]: Starting Location Lookup Service...
Aug 28 12:52:37 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.bolt' unit='bolt.service' requested by ':1.38' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:37 home-B70-80 systemd[1]: Starting Thunderbolt system service...
Aug 28 12:52:37 home-B70-80 gnome-shell[1756]: Telepathy is not available, chat integration will be disabled.
Aug 28 12:52:37 home-B70-80 systemd[1443]: Starting Virtual filesystem service - disk device monitor...
Aug 28 12:52:37 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:37 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.GeoClue2'
Aug 28 12:52:37 home-B70-80 systemd[1]: Started Location Lookup Service.
Aug 28 12:52:37 home-B70-80 wpa_supplicant[1351]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
Aug 28 12:52:37 home-B70-80 boltd[1841]: bolt 0.3 starting up.
Aug 28 12:52:37 home-B70-80 boltd[1841]: config: loading user config
Aug 28 12:52:37 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
Aug 28 12:52:37 home-B70-80 systemd[1443]: Started Virtual filesystem service - disk device monitor.
Aug 28 12:52:37 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.GoaVolumeMonitor' unit='gvfs-goa-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:37 home-B70-80 systemd[1443]: Starting Virtual filesystem service - GNOME Online Accounts monitor...
Aug 28 12:52:37 home-B70-80 boltd[1841]: store: loading devices
Aug 28 12:52:37 home-B70-80 boltd[1841]: power: force_power support: no
Aug 28 12:52:37 home-B70-80 boltd[1841]: udev: enumerating devices
Aug 28 12:52:37 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.bolt'
Aug 28 12:52:37 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.OnlineAccounts' requested by ':1.33' (uid=1000 pid=1852 comm="/usr/lib/gvfs/gvfs-goa-volume-monitor " label="unconfined")
Aug 28 12:52:37 home-B70-80 systemd[1]: Started Thunderbolt system service.
Aug 28 12:52:37 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gnome.evolution.dataserver.Sources5' unit='evolution-source-registry.service' requested by ':1.34' (uid=1000 pid=1837 comm="/usr/lib/gnome-shell/gnome-shell-calendar-server " label="unconfined")
Aug 28 12:52:37 home-B70-80 systemd[1443]: Starting Evolution source registry...
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.evolution.dataserver.Sources5'
Aug 28 12:52:38 home-B70-80 systemd[1443]: Started Evolution source registry.
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.Shell.CalendarServer'
Aug 28 12:52:38 home-B70-80 goa-daemon[1856]: goa-daemon version 3.28.0 starting
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.Identity' requested by ':1.36' (uid=1000 pid=1856 comm="/usr/lib/gnome-online-accounts/goa-daemon " label="unconfined")
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.OnlineAccounts'
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.GoaVolumeMonitor'
Aug 28 12:52:38 home-B70-80 systemd[1443]: Started Virtual filesystem service - GNOME Online Accounts monitor.
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.AfcVolumeMonitor' unit='gvfs-afc-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:38 home-B70-80 systemd[1443]: Starting Virtual filesystem service - Apple File Conduit monitor...
Aug 28 12:52:38 home-B70-80 gvfs-afc-volume-monitor[1876]: Volume monitor alive
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.AfcVolumeMonitor'
Aug 28 12:52:38 home-B70-80 systemd[1443]: Started Virtual filesystem service - Apple File Conduit monitor.
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:38 home-B70-80 systemd[1443]: Starting Virtual filesystem service - Media Transfer Protocol monitor...
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'
Aug 28 12:52:38 home-B70-80 systemd[1443]: Started Virtual filesystem service - Media Transfer Protocol monitor.
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.GPhoto2VolumeMonitor' unit='gvfs-gphoto2-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:38 home-B70-80 systemd[1443]: Starting Virtual filesystem service - digital camera monitor...
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.Identity'
Aug 28 12:52:38 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.GPhoto2VolumeMonitor'
Aug 28 12:52:38 home-B70-80 systemd[1443]: Started Virtual filesystem service - digital camera monitor.
Aug 28 12:52:38 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.38' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:38 home-B70-80 systemd[1]: Starting PackageKit Daemon...
Aug 28 12:52:38 home-B70-80 PackageKit: daemon start
Aug 28 12:52:38 home-B70-80 spice-vdagent[1917]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'Settings' on the module 'settings'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'RecentsIndicator' on the module 'indicator'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'RecentManager' on the module 'recentManager'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'SearchItem' on the module 'searchItem'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'FileInfoItem' on the module 'fileInfoItem'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-shell[1756]: Some code accessed the property 'ActionsItem' on the module 'actionsItem'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:38 home-B70-80 gnome-session[1505]: gnome-session-binary[1505]: WARNING: App 'spice-vdagent.desktop' exited with code 1
Aug 28 12:52:38 home-B70-80 gnome-session-binary[1505]: WARNING: App 'spice-vdagent.desktop' exited with code 1
Aug 28 12:52:38 home-B70-80 gsd-xsettings[1903]: Failed to get current display configuration state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name "org.gnome.Mutter.DisplayConfig" does not exist
Aug 28 12:52:38 home-B70-80 kernel: [ 82.916747] rfkill: input handler disabled
Aug 28 12:52:39 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' requested by ':1.59' (uid=1000 pid=1942 comm="/usr/lib/gnome-settings-daemon/gsd-keyboard " label="unconfined")
Aug 28 12:52:39 home-B70-80 systemd[1]: Starting Locale Service...
Aug 28 12:52:39 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 8510ms.
Aug 28 12:52:39 home-B70-80 gnome-shell[1756]: Some code accessed the property 'POSITION' on the module 'keys'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Aug 28 12:52:39 home-B70-80 gsd-sharing[1901]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-user-share-webdav.service not loaded.
Aug 28 12:52:39 home-B70-80 gsd-sharing[1901]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit rygel.service not loaded.
Aug 28 12:52:39 home-B70-80 gsd-sharing[1901]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.service not loaded.
Aug 28 12:52:39 home-B70-80 gnome-shell[1756]: JS WARNING: [/usr/share/gnome-shell/extensions/ubuntu-dock@ubuntu.com/appIcons.js 1028]: unreachable code after return statement
Aug 28 12:52:39 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.locale1'
Aug 28 12:52:39 home-B70-80 systemd[1]: Started Locale Service.
Aug 28 12:52:39 home-B70-80 gnome-session-binary[1505]: Entering running state
Aug 28 12:52:39 home-B70-80 bluetoothd[1313]: Failed to set mode: Blocked through rfkill (0x12)
Aug 28 12:52:39 home-B70-80 gnome-shell[1756]: Unable to connect to ibus: Impossible de se connecter : Connexion refusée
Aug 28 12:52:39 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gnome.evolution.dataserver.Calendar7' unit='evolution-calendar-factory.service' requested by ':1.34' (uid=1000 pid=1837 comm="/usr/lib/gnome-shell/gnome-shell-calendar-server " label="unconfined")
Aug 28 12:52:39 home-B70-80 systemd[1443]: Starting Evolution calendar service...
Aug 28 12:52:39 home-B70-80 indicator-appli[2019]: Unable to get watcher name 'org.kde.StatusNotifierWatcher'
Aug 28 12:52:39 home-B70-80 snap-userd-autostart.desktop[2005]: erreur : autostart failed for the following apps:
Aug 28 12:52:39 home-B70-80 snap-userd-autostart.desktop[2005]: - "qstart.desktop": cannot match desktop file with snap libreoffice applications
Aug 28 12:52:39 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Aug 28 12:52:39 home-B70-80 systemd[1]: Started PackageKit Daemon.
Aug 28 12:52:39 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='ca.desrt.dconf' requested by ':1.56' (uid=1000 pid=1933 comm="/usr/lib/gnome-settings-daemon/gsd-color " label="unconfined")
Aug 28 12:52:39 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'ca.desrt.dconf'
Aug 28 12:52:40 home-B70-80 gnome-shell[1756]: JS ERROR: Gio.DBusError: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.ReserveDevice1.Audio1': no such name#012getUniqueBusNameSync@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:58:20#012traverseBusNames/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:82:34
Aug 28 12:52:40 home-B70-80 gnome-shell[1756]: Error setting property 'Powered' on interface org.bluez.Adapter1: GDBus.Error:org.bluez.Error.Blocked: Blocked through rfkill (g-io-error-quark, 36)
Aug 28 12:52:40 home-B70-80 gnome-shell[1756]: Error looking up permission: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.impl.portal.PermissionStore was not provided by any .service files
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gtk.vfs.Metadata' unit='gvfs-metadata.service' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:52:41 home-B70-80 systemd[1443]: Starting Virtual filesystem metadata service...
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gtk.vfs.Metadata'
Aug 28 12:52:41 home-B70-80 systemd[1443]: Started Virtual filesystem metadata service.
Aug 28 12:52:41 home-B70-80 nautilus-autostart.desktop[2020]: Initializing nautilus-image-converter extension
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.freedesktop.FileManager1' requested by ':1.66' (uid=1000 pid=2020 comm="nautilus-desktop " label="unconfined")
Aug 28 12:52:41 home-B70-80 org.freedesktop.FileManager1[1502]: Initializing nautilus-image-converter extension
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.freedesktop.FileManager1'
Aug 28 12:52:41 home-B70-80 gnome-shell[1756]: GNOME Shell started at Tue Aug 28 2018 12:52:38 GMT+0200 (CEST)
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.evolution.dataserver.Calendar7'
Aug 28 12:52:41 home-B70-80 systemd[1443]: Started Evolution calendar service.
Aug 28 12:52:41 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating via systemd: service name='org.gnome.evolution.dataserver.AddressBook9' unit='evolution-addressbook-factory.service' requested by ':1.72' (uid=1000 pid=2085 comm="/usr/lib/evolution/evolution-calendar-factory-subp" label="unconfined")
Aug 28 12:52:41 home-B70-80 systemd[1443]: Starting Evolution address book service...
Aug 28 12:52:42 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.evolution.dataserver.AddressBook9'
Aug 28 12:52:42 home-B70-80 systemd[1443]: Started Evolution address book service.
Aug 28 12:52:42 home-B70-80 gnome-software[2016]: plugin appstream took 2.6 seconds to do setup
Aug 28 12:52:43 home-B70-80 gnome-software[2016]: enabled plugins: os-release, desktop-categories, ubuntuone, packagekit-upgrade, packagekit, packagekit-refresh, packagekit-refine-repos, packagekit-offline, systemd-updates, shell-extensions, packagekit-local, fwupd, packagekit-url-to-app, packagekit-proxy, appstream, steam, generic-updates, modalias, rewrite-resource, desktop-menu-path, epiphany, hardcoded-featured, packagekit-refine, hardcoded-blacklist, ubuntu-reviews, hardcoded-popular, packagekit-history, snap, provenance, icons, provenance-license, key-colors, key-colors-metadata
Aug 28 12:52:43 home-B70-80 gnome-software[2016]: disabled plugins: repos, dpkg, dummy, odrs
Aug 28 12:52:43 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.fwupd' unit='fwupd.service' requested by ':1.67' (uid=1000 pid=2016 comm="/usr/bin/gnome-software --gapplication-service " label="unconfined")
Aug 28 12:52:43 home-B70-80 systemd[1]: Starting Firmware update daemon...
Aug 28 12:52:44 home-B70-80 fwupd[2123]: disabling plugin because: failed to startup dell: failed to initialize libsmbios library
Aug 28 12:52:44 home-B70-80 fwupd[2123]: disabling plugin because: failed to startup uefi: UEFI firmware updating not supported
Aug 28 12:52:44 home-B70-80 fwupd[2123]: disabling plugin because: failed to coldplug amt: ME refused connection
Aug 28 12:52:44 home-B70-80 fwupd[2123]: disabling plugin because: failed to coldplug thunderbolt_power: missing kernel support for intel-wmi-thunderbolt
Aug 28 12:52:44 home-B70-80 fwupd[2123]: disabling plugin because: failed to coldplug synapticsmst: MST firmware updating not supported by OEM
Aug 28 12:52:44 home-B70-80 fwupd[2123]: using plugins: nitrokey, dfu, altos, csr, steelseries, colorhug, upower, unifying, udev, thunderbolt, ebitdo
Aug 28 12:52:44 home-B70-80 fwupd[2123]: Daemon ready for requests
Aug 28 12:52:44 home-B70-80 nautilus-deskto[2020]: Called "net usershare info" but it failed: « net usershare » a retourné l'erreur 255 : mkdir failed on directory /var/run/samba/msg.lock: Permission non accordée#012net usershare: cannot open usershare directory /var/lib/samba/usershares. Error Aucun fichier ou dossier de ce type#012Please ask your system administrator to enable user sharing.
Aug 28 12:52:44 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.fwupd'
Aug 28 12:52:44 home-B70-80 systemd[1]: Started Firmware update daemon.
Aug 28 12:52:45 home-B70-80 PackageKit: get-updates transaction /2554_caeabdae from uid 1000 finished with success after 1523ms
Aug 28 12:52:45 home-B70-80 gnome-software[2016]: Only 0 apps for recent list, hiding
Aug 28 12:52:46 home-B70-80 systemd[1]: Received SIGRTMIN+21 from PID 615 (plymouthd).
Aug 28 12:52:46 home-B70-80 systemd[1]: Started Hold until boot process finishes up.
Aug 28 12:52:46 home-B70-80 systemd[1]: Starting Set console scheme...
Aug 28 12:52:46 home-B70-80 systemd[1]: Reached target Multi-User System.
Aug 28 12:52:46 home-B70-80 systemd[1]: Starting TLP system startup/shutdown...
Aug 28 12:52:46 home-B70-80 systemd[1]: Reached target Graphical Interface.
Aug 28 12:52:46 home-B70-80 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Aug 28 12:52:46 home-B70-80 systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
Aug 28 12:52:46 home-B70-80 systemd[1]: Started Update UTMP about System Runlevel Changes.
Aug 28 12:52:46 home-B70-80 systemd[1]: Started Set console scheme.
Aug 28 12:52:46 home-B70-80 systemd[1]: Created slice system-getty.slice.
Aug 28 12:52:47 home-B70-80 systemd-timesyncd[1087]: Synchronized to time server [2001:67c:1560:8003::c7]:123 (ntp.ubuntu.com).
Aug 28 12:52:47 home-B70-80 PackageKit: resolve transaction /2555_cebbcaac from uid 1000 finished with success after 1794ms
Aug 28 12:52:48 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 17390ms.
Aug 28 12:52:48 home-B70-80 tlp[2156]: Applying power save settings...done.
Aug 28 12:52:48 home-B70-80 tlp[2156]: Setting battery charge thresholds...done.
Aug 28 12:52:48 home-B70-80 systemd[1]: Started TLP system startup/shutdown.
Aug 28 12:52:48 home-B70-80 systemd[1]: Startup finished in 37.362s (kernel) + 54.809s (userspace) = 1min 32.172s.
Aug 28 12:52:57 home-B70-80 PackageKit: search-file transaction /2556_eaabdade from uid 1000 finished with success after 8405ms
Aug 28 12:52:57 home-B70-80 PackageKit: search-file transaction /2557_aadbcadc from uid 1000 finished with success after 449ms
Aug 28 12:52:59 home-B70-80 PackageKit: search-file transaction /2558_aedbbbab from uid 1000 finished with success after 425ms
Aug 28 12:52:59 home-B70-80 PackageKit: search-file transaction /2559_aeaacdcc from uid 1000 finished with success after 463ms
Aug 28 12:53:00 home-B70-80 PackageKit: search-file transaction /2560_ccddbbaa from uid 1000 finished with success after 487ms
Aug 28 12:53:01 home-B70-80 PackageKit: search-file transaction /2561_bbdbaabc from uid 1000 finished with success after 428ms
Aug 28 12:53:02 home-B70-80 PackageKit: search-file transaction /2562_bedbccab from uid 1000 finished with success after 426ms
Aug 28 12:53:03 home-B70-80 PackageKit: search-file transaction /2563_deecdbbb from uid 1000 finished with success after 425ms
Aug 28 12:53:04 home-B70-80 PackageKit: search-file transaction /2564_edabbaaa from uid 1000 finished with success after 424ms
Aug 28 12:53:05 home-B70-80 dhclient[1727]: XMT: Info-Request on wlp3s0, interval 33950ms.
Aug 28 12:53:05 home-B70-80 PackageKit: search-file transaction /2565_ebadaeee from uid 1000 finished with success after 445ms
Aug 28 12:53:06 home-B70-80 PackageKit: search-file transaction /2566_bedabbea from uid 1000 finished with success after 456ms
Aug 28 12:53:08 home-B70-80 PackageKit: search-file transaction /2567_cbdcbbeb from uid 1000 finished with success after 446ms
Aug 28 12:53:10 home-B70-80 PackageKit: search-file transaction /2568_cbcbdbae from uid 1000 finished with success after 422ms
Aug 28 12:53:11 home-B70-80 PackageKit: search-file transaction /2569_bccbdccb from uid 1000 finished with success after 425ms
Aug 28 12:53:11 home-B70-80 gnome-software[2016]: Failed to find one package for hplip.desktop, /usr/share/applications/hplip.desktop, [0]
Aug 28 12:53:13 home-B70-80 PackageKit: get-details transaction /2570_ccccbadc from uid 1000 finished with success after 1863ms
Aug 28 12:53:17 home-B70-80 NetworkManager[1352]: <warn> [1535453597.5917] dhcp6 (wlp3s0): request timed out
Aug 28 12:53:17 home-B70-80 NetworkManager[1352]: <info> [1535453597.5917] dhcp6 (wlp3s0): state changed unknown -> timeout
Aug 28 12:53:17 home-B70-80 NetworkManager[1352]: <info> [1535453597.5926] dhcp6 (wlp3s0): canceled DHCP transaction, DHCP client pid 1727
Aug 28 12:53:17 home-B70-80 NetworkManager[1352]: <info> [1535453597.5926] dhcp6 (wlp3s0): state changed timeout -> done
Aug 28 12:53:31 home-B70-80 systemd[1]: Starting Stop ureadahead data collection...
Aug 28 12:53:31 home-B70-80 systemd[1]: Started Stop ureadahead data collection.
Aug 28 12:53:44 home-B70-80 gnome-shell[1756]: [AppIndicatorSupport-DEBUG] Registering StatusNotifierItem :1.75/org/ayatana/NotificationItem/software_update_available
Aug 28 12:54:40 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.ChromeGnomeShell' requested by ':1.80' (uid=1000 pid=2529 comm="/usr/bin/python3 /usr/bin/chrome-gnome-shell /usr/" label="unconfined")
Aug 28 12:54:40 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.ChromeGnomeShell'
Aug 28 12:55:47 home-B70-80 org.gnome.Shell.desktop[1756]: (/usr/lib/firefox/firefox:2419): dconf-WARNING **: 12:55:47.788: Unable to open /var/lib/snapd/desktop/dconf/profile/user: Permission non accordée
Aug 28 12:55:58 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Activating service name='org.gnome.Nautilus' requested by ':1.25' (uid=1000 pid=1756 comm="/usr/bin/gnome-shell " label="unconfined")
Aug 28 12:55:58 home-B70-80 dbus-daemon[1502]: [session uid=1000 pid=1502] Successfully activated service 'org.gnome.Nautilus'
Aug 28 12:55:58 home-B70-80 org.gnome.Nautilus[1502]: Initializing nautilus-image-converter extension
Aug 28 12:55:59 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.77' (uid=1000 pid=2590 comm="/usr/bin/nautilus --gapplication-service " label="unconfined")
Aug 28 12:55:59 home-B70-80 systemd[1]: Starting Hostname Service...
Aug 28 12:55:59 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 28 12:55:59 home-B70-80 systemd[1]: Started Hostname Service.
Aug 28 12:55:59 home-B70-80 nautilus[2590]: Called "net usershare info" but it failed: « net usershare » a retourné l'erreur 255 : mkdir failed on directory /var/run/samba/msg.lock: Permission non accordée#012net usershare: cannot open usershare directory /var/lib/samba/usershares. Error Aucun fichier ou dossier de ce type#012Please ask your system administrator to enable user sharing.
Aug 28 12:56:39 home-B70-80 systemd-resolved[1086]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
Aug 28 12:56:39 home-B70-80 systemd-resolved[1086]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
Aug 28 12:56:42 home-B70-80 gvfsd-metadata[2066]: g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed
Aug 28 12:56:42 home-B70-80 gvfsd-metadata[2066]: message repeated 7 times: [ g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed]
Aug 28 12:57:36 home-B70-80 dbus-daemon[1342]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.77' (uid=1000 pid=2590 comm="/usr/bin/nautilus --gapplication-service " label="unconfined")
Aug 28 12:57:36 home-B70-80 systemd[1]: Starting Hostname Service...
Aug 28 12:57:36 home-B70-80 dbus-daemon[1342]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 28 12:57:36 home-B70-80 systemd[1]: Started Hostname Service.Kern.log
Aug 28 12:50:52 home-B70-80 kernel: [12125.080299] rfkill: input handler enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] KERNEL supported cpus:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Intel GenuineIntel
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] AMD AuthenticAMD
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Centaur CentaurHauls
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c98efff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009c98f000-0x000000009ce7efff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NX (Execute Disable) protection: active
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] SMBIOS 2.7 present.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR default type: uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR fixed ranges enabled:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 00000-9FFFF write-back
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] A0000-BFFFF uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] C0000-E7FFF write-protect
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] E8000-EFFFF write-combining
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] F0000-FFFFF write-protect
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] MTRR variable ranges enabled:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 5 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 6 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 7 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 8 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] 9 disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] total RAM covered: 14800M
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Found optimal setting for mtrr clean up
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Scanning 1 areas for low memory corruption
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Using GB pages for direct mapping
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b53f000, 0x19b53ffff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b540000, 0x19b540fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b541000, 0x19b541fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b542000, 0x19b542fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b543000, 0x19b543fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b544000, 0x19b544fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b545000, 0x19b545fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b546000, 0x19b546fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b547000, 0x19b547fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] BRK [0x19b548000, 0x19b548fff] PGTABLE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RAMDISK: [mem 0x3122f000-0x3490efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Early table checksum verification disabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: XSDT 0x000000009CFD0188 0000CC (v01 LENOVO CB-01 00000001 01000013)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FACS 0x000000009CF7A000 000040
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] No NUMA configuration found
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Zone ranges:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Device empty
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Movable zone start for each node
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Early memory node ranges
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000096f79fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x000000009787a000-0x000000009c98efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] On node 0 totalpages: 2076717
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 21 pages reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 zone: 9923 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMA32 zone: 635024 pages, LIFO batch:31
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal zone: 22464 pages used for memmap
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Reserved but unavailable: 99 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9c98f000-0x9ce7efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044245
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Policy zone: Normal
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Memory: 8024652K/8306868K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 282216K reserved, 0K cma-reserved)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Kernel/User page tables isolation: enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ftrace: allocating 39121 entries in 153 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Hierarchical RCU implementation.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Tasks RCU enabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] vt handoff: transparent VT on vt#1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] Console: colour dummy device 80x25
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] console [tty0] enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: Core revision 20170831
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] hpet clockevent registered
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] APIC: Switch to symmetric I/O mode setup
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: Host address width 39
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
Aug 28 12:52:19 home-B70-80 kernel: [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.020000] tsc: Fast TSC calibration using PIT
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] tsc: Detected 2394.465 MHz processor
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.93 BogoMIPS (lpj=9577860)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] pid_max: default: 32768 minimum: 301
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Security Framework initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Yama: becoming mindful.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] AppArmor: AppArmor initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028203] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028203] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028208] mce: CPU supports 7 MCE banks
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028226] process: using mwait in idle threads
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028228] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028229] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028230] Spectre V2 : Mitigation: Full generic retpoline
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028231] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028231] Spectre V2 : Enabling Restricted Speculation for firmware calls
Aug 28 12:52:19 home-B70-80 kernel: [ 0.028232] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Aug 28 12:52:19 home-B70-80 kernel: [ 0.034494] Freeing SMP alternatives memory: 36K
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036058] TSC deadline timer enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036060] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036122] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036164] ... version: 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036165] ... bit width: 48
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036165] ... generic registers: 4
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036168] ... value mask: 0000ffffffffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036168] ... max period: 00007fffffffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036169] ... fixed-purpose events: 3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036169] ... event mask: 000000070000000f
Aug 28 12:52:19 home-B70-80 kernel: [ 0.036200] Hierarchical SRCU implementation.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037204] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037215] smp: Bringing up secondary CPUs ...
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037283] x86: Booting SMP configuration:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.037284] .... node #0, CPUs: #1 #2 #3
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smp: Brought up 1 node, 4 CPUs
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smpboot: Max logical packages: 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.040490] smpboot: Total of 4 processors activated (19155.72 BogoMIPS)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044254] devtmpfs: initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044254] x86/mm: Memory block size: 128MB
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044694] evm: security.selinux
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044695] evm: security.SMACK64
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044695] evm: security.SMACK64EXEC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044696] evm: security.SMACK64TRANSMUTE
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044696] evm: security.SMACK64MMAP
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044697] evm: security.apparmor
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044697] evm: security.ima
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044698] evm: security.capability
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] pinctrl core: initialized pinctrl subsystem
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] RTC time: 10:51:16, date: 08/28/18
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] NET: Registered protocol family 16
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] audit: initializing netlink subsys (disabled)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] audit: type=2000 audit(1535453476.044:1): state=initialized audit_enabled=0 res=1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] cpuidle: using governor ladder
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] cpuidle: using governor menu
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] Simple Boot Flag at 0x44 set to 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] ACPI: bus type PCI registered
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Aug 28 12:52:19 home-B70-80 kernel: [ 0.044711] PCI: Using configuration type 1 for base access
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Module Device)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Processor Device)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Processor Aggregator Device)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Added _OSI(Linux-Dell-Video)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.045188] ACPI: Executed 7 blocks of module-level executable AML code
Aug 28 12:52:19 home-B70-80 kernel: [ 0.056030] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057471] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057480] ACPI: SSDT 0xFFFF8B7394928800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057694] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.057694] ACPI: SSDT 0xFFFF8B7394E64800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060173] ACPI: Dynamic OEM Table Load:
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060181] ACPI: SSDT 0xFFFF8B73948D7A00 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060939] ACPI: EC: EC started
Aug 28 12:52:19 home-B70-80 kernel: [ 0.060939] ACPI: EC: interrupt blocked
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061418] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061420] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061422] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061422] ACPI: Interpreter enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061466] ACPI: (supports S0 S3 S4 S5)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061467] ACPI: Using IOAPIC for interrupt routing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061508] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061942] ACPI: GPE 0x62 active on init
Aug 28 12:52:19 home-B70-80 kernel: [ 0.061957] ACPI: Enabled 6 GPEs in block 00 to 7F
Aug 28 12:52:19 home-B70-80 kernel: [ 0.080684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Aug 28 12:52:19 home-B70-80 kernel: [ 0.080691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.081945] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.081946] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083069] PCI host bridge to bus 0000:00
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083071] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083073] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083074] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083076] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083077] pci_bus 0000:00: root bus resource [bus 00-fe]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083086] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083418] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083430] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083436] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083441] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083779] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
Aug 28 12:52:19 home-B70-80 kernel: [ 0.083790] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084143] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084162] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084218] pci 0000:00:14.0: PME# supported from D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084528] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084550] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084616] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084929] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
Aug 28 12:52:19 home-B70-80 kernel: [ 0.084948] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085003] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085309] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085745] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.085815] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086182] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086251] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.086621] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
Aug 28 12:52:19 home-B70-80 kernel: [ 0.087820] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.091298] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.2: PME# supported from D3hot
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: supports D1 D2
Aug 28 12:52:19 home-B70-80 kernel: [ 0.095258] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108028] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108031] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108034] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108303] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108412] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.108705] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Aug 28 12:52:19 home-B70-80 kernel: [ 0.124168] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.124172] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125489] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125563] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125773] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.125982] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126426] ACPI: EC: interrupt unblocked
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126434] ACPI: EC: event unblocked
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126441] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126442] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126651] SCSI subsystem initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] libata version 3.00 loaded.
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: setting as boot VGA device
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] pci 0000:00:02.0: vgaarb: bridge control possible
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] vgaarb: loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] ACPI: bus type USB registered
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new interface driver usbfs
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new interface driver hub
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] usbcore: registered new device driver usb
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] EDAC MC: Ver: 3.0.0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.126663] PCI: Using ACPI for IRQ routing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128436] PCI: pci_cache_line_size set to 64 bytes
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128752] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128753] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128754] e820: reserve RAM buffer [mem 0x9c98f000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128755] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128756] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128838] NetLabel: Initializing
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128839] NetLabel: domain hash size = 128
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128839] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
Aug 28 12:52:19 home-B70-80 kernel: [ 0.128854] NetLabel: unlabeled traffic allowed by default
Aug 28 12:52:19 home-B70-80 kernel: [ 0.132306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.132312] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Aug 28 12:52:19 home-B70-80 kernel: [ 0.134333] clocksource: Switched to clocksource hpet
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142562] VFS: Disk quotas dquot_6.6.0
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142680] AppArmor: AppArmor Filesystem Enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 0.142707] pnp: PnP ACPI init
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143408] system 00:00: [io 0x0680-0x069f] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143413] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143415] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143416] system 00:00: [io 0xffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143418] system 00:00: [io 0x1800-0x18fe] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143420] system 00:00: [io 0x164e-0x164f] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143426] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143482] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143531] system 00:02: [io 0x1854-0x1857] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143535] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143597] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.143656] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144089] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144091] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144093] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144094] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144096] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144097] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144099] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144101] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144103] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144104] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144106] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144108] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144111] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.144462] pnp: PnP ACPI: found 6 devices
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150411] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150423] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150427] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150429] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150445] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150449] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150451] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150454] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150457] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150461] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150464] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150469] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150471] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150474] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150481] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150485] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150492] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150494] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150497] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150498] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150500] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150501] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150503] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150504] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150506] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150645] NET: Registered protocol family 2
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150850] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.150966] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151139] TCP: Hash tables configured (established 65536 bind 65536)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151173] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151202] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151258] NET: Registered protocol family 1
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151270] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151369] pci 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 12:52:19 home-B70-80 kernel: [ 0.151371] pci 0000:00:14.0: PCI INT A: no GSI
Aug 28 12:52:19 home-B70-80 kernel: [ 0.172273] PCI: CLS 64 bytes, default 64
Aug 28 12:52:19 home-B70-80 kernel: [ 0.172306] Unpacking initramfs...
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032784] Freeing initrd memory: 56192K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032834] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032839] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032853] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.032855] software IO TLB [mem 0x9898f000-0x9c98f000] (64MB) mapped at [ (ptrval)- (ptrval)]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033050] Scanning for low memory corruption every 60 seconds
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033649] Initialise system trusted keyrings
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033657] Key type blacklist registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.033692] workingset: timestamp_bits=36 max_order=21 bucket_order=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.034753] zbud: loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.035222] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Aug 28 12:52:19 home-B70-80 kernel: [ 1.035348] fuse init (API version 7.26)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036511] Key type asymmetric registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036512] Asymmetric key parser 'x509' registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036581] io scheduler noop registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036582] io scheduler deadline registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.036622] io scheduler cfq registered (default)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037272] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037290] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037303] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037319] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037389] vesafb: mode is 1600x900x32, linelength=6400, pages=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037389] vesafb: scrolling: redraw
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037391] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037400] vesafb: framebuffer at 0xb0000000, mapped to 0x (ptrval), using 5632k, total 5632k
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037491] Console: switching to colour frame buffer device 200x56
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037510] fb0: VESA VGA frame buffer device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037523] intel_idle: MWAIT substates: 0x11142120
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037523] intel_idle: v0.4.1 model 0x3D
Aug 28 12:52:19 home-B70-80 kernel: [ 1.037694] intel_idle: lapic_timer_reliable_states 0xffffffff
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038150] ACPI: AC Adapter [ADP0] (on-line)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038227] ACPI: Lid Switch [LID0]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038271] ACPI: Power Button [PWRB]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038316] ACPI: Power Button [PWRF]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.038712] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 1.041461] Linux agpgart interface v0.103
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042785] loop: module loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042926] libphy: Fixed MDIO Bus: probed
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042927] tun: Universal TUN/TAP device driver, 1.6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042955] PPP generic driver version 2.4.2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.042990] ehci-pci: EHCI PCI platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043116] ehci-pci 0000:00:1d.0: EHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043121] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.043131] ehci-pci 0000:00:1d.0: debug port 2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.047025] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Aug 28 12:52:19 home-B70-80 kernel: [ 1.047040] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060068] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060443] usb usb1: Product: EHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060444] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060446] usb usb1: SerialNumber: 0000:00:1d.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060702] hub 1-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.060741] hub 1-0:1.0: 2 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061095] ehci-platform: EHCI generic platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061110] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061113] ohci-pci: OHCI PCI platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061123] ohci-platform: OHCI generic platform driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061128] uhci_hcd: USB Universal Host Controller Interface driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061266] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061267] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061286] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.061292] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062352] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062356] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062768] usb usb2: Product: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062770] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062771] usb usb2: SerialNumber: 0000:00:14.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062903] hub 2-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.062930] hub 2-0:1.0: 11 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067801] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067807] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067836] usb usb3: Product: xHCI Host Controller
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067837] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067838] usb usb3: SerialNumber: 0000:00:14.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067926] hub 3-0:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.067932] hub 3-0:1.0: 4 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.069619] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084506] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084510] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 28 12:52:19 home-B70-80 kernel: [ 1.084618] mousedev: PS/2 mouse device common for all mice
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085165] rtc_cmos 00:01: RTC can wake from S4
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085175] rtc_cmos: probe of 00:01 failed with error -16
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085189] i2c /dev entries driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085231] device-mapper: uevent: version 1.0.3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085289] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085295] intel_pstate: Intel P-state driver initializing
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085514] ledtrig-cpu: registered to indicate activity on CPUs
Aug 28 12:52:19 home-B70-80 kernel: [ 1.085840] NET: Registered protocol family 10
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088875] Segment Routing with IPv6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088892] NET: Registered protocol family 17
Aug 28 12:52:19 home-B70-80 kernel: [ 1.088916] Key type dns_resolver registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089096] RAS: Correctable Errors collector initialized.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089122] microcode: sig=0x306d4, pf=0x40, revision=0x2b
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089187] microcode: Microcode Update Driver: v2.2.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089194] sched_clock: Marking stable (1089184639, 0)->(1072522072, 16662567)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089345] registered taskstats version 1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.089351] Loading compiled-in X.509 certificates
Aug 28 12:52:19 home-B70-80 kernel: [ 1.091394] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
Aug 28 12:52:19 home-B70-80 kernel: [ 1.091407] zswap: loaded using pool lzo/zbud
Aug 28 12:52:19 home-B70-80 kernel: [ 1.094225] Key type big_key registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.094229] Key type trusted registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095694] Key type encrypted registered
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095699] AppArmor: AppArmor sha1 policy hashing enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095702] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.095717] evm: HMAC attrs: 0x1
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096244] Magic number: 14:515:882
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096308] hctosys: unable to open rtc device (rtc0)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.096350] EDD information not available.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.099411] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.136978] ACPI: Battery Slot [BAT0] (battery present)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.396034] usb 1-1: new high-speed USB device number 2 using ehci-pci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.400032] usb 2-3: new full-speed USB device number 2 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.460288] Freeing unused kernel memory: 2408K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.476068] Write protecting the kernel read-only data: 20480k
Aug 28 12:52:19 home-B70-80 kernel: [ 1.477202] Freeing unused kernel memory: 2008K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.480535] Freeing unused kernel memory: 1900K
Aug 28 12:52:19 home-B70-80 kernel: [ 1.485502] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.485503] x86/mm: Checking user space page tables
Aug 28 12:52:19 home-B70-80 kernel: [ 1.490602] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550012] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550014] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550015] usb 2-3: Product: USB Receiver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.550016] usb 2-3: Manufacturer: Logitech
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552330] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552486] hub 1-1:1.0: USB hub found
Aug 28 12:52:19 home-B70-80 kernel: [ 1.552578] hub 1-1:1.0: 8 ports detected
Aug 28 12:52:19 home-B70-80 kernel: [ 1.584495] ahci 0000:00:1f.2: version 3.0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.586397] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 28 12:52:19 home-B70-80 kernel: [ 1.586402] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Aug 28 12:52:19 home-B70-80 kernel: [ 1.594848] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
Aug 28 12:52:19 home-B70-80 kernel: [ 1.594851] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595215] scsi host0: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595282] scsi host1: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595350] scsi host2: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595405] scsi host3: ahci
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595433] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595435] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595436] ata3: DUMMY
Aug 28 12:52:19 home-B70-80 kernel: [ 1.595436] ata4: DUMMY
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597200] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597202] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 28 12:52:19 home-B70-80 kernel: [ 1.597777] r8169 0000:02:00.0 enp2s0: renamed from eth0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612099] [drm] Memory usable by graphics device = 4096M
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612102] checking generic (b0000000 580000) vs hw (b0000000 10000000)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612102] fb: switching to inteldrmfb from VESA VGA
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612117] Console: switching to colour dummy device 80x25
Aug 28 12:52:19 home-B70-80 kernel: [ 1.612197] [drm] Replacing VGA console driver
Aug 28 12:52:19 home-B70-80 kernel: [ 1.618138] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug 28 12:52:19 home-B70-80 kernel: [ 1.618139] [drm] Driver supports precise vblank timestamp query.
Aug 28 12:52:19 home-B70-80 kernel: [ 1.620114] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 28 12:52:19 home-B70-80 kernel: [ 1.626708] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
Aug 28 12:52:19 home-B70-80 kernel: [ 1.628335] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.628638] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663379] fbcon: inteldrmfb (fb0) is primary device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663426] Console: switching to colour frame buffer device 200x56
Aug 28 12:52:19 home-B70-80 kernel: [ 1.663447] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Aug 28 12:52:19 home-B70-80 kernel: [ 1.676053] usb 2-4: new high-speed USB device number 3 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824358] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824360] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824362] usb 2-4: Product: USB2.0-CRW
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824363] usb 2-4: Manufacturer: Generic
Aug 28 12:52:19 home-B70-80 kernel: [ 1.824364] usb 2-4: SerialNumber: 20100201396000000
Aug 28 12:52:19 home-B70-80 kernel: [ 1.910879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 28 12:52:19 home-B70-80 kernel: [ 1.912942] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 1.914252] ata2.00: configured for UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 1.952024] usb 2-6: new high-speed USB device number 4 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 2.044042] tsc: Refined TSC clocksource calibration: 2394.456 MHz
Aug 28 12:52:19 home-B70-80 kernel: [ 2.044050] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139472] random: fast init done
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139483] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139485] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139487] usb 2-6: Product: Lenovo EasyCamera
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139488] usb 2-6: Manufacturer: J58F5583G
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139490] usb 2-6: SerialNumber: 200901010001
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139714] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139722] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.139739] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.223705] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.239286] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
Aug 28 12:52:19 home-B70-80 kernel: [ 2.254967] psmouse serio1: elantech: Elan sample query result 05, 20, 97
Aug 28 12:52:19 home-B70-80 kernel: [ 2.268020] usb 2-7: new full-speed USB device number 5 using xhci_hcd
Aug 28 12:52:19 home-B70-80 kernel: [ 2.328098] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 28 12:52:19 home-B70-80 kernel: [ 2.345906] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
Aug 28 12:52:19 home-B70-80 kernel: [ 2.417391] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
Aug 28 12:52:19 home-B70-80 kernel: [ 2.417393] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 12:52:19 home-B70-80 kernel: [ 2.422570] hidraw: raw HID events driver (C) Jiri Kosina
Aug 28 12:52:19 home-B70-80 kernel: [ 2.422897] usbcore: registered new interface driver rtsx_usb
Aug 28 12:52:19 home-B70-80 kernel: [ 2.426233] usbcore: registered new interface driver usbhid
Aug 28 12:52:19 home-B70-80 kernel: [ 2.426234] usbhid: USB HID core driver
Aug 28 12:52:19 home-B70-80 kernel: [ 2.427869] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
Aug 28 12:52:19 home-B70-80 kernel: [ 2.427964] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
Aug 28 12:52:19 home-B70-80 kernel: [ 2.428107] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
Aug 28 12:52:19 home-B70-80 kernel: [ 2.488242] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
Aug 28 12:52:19 home-B70-80 kernel: [ 3.068295] clocksource: Switched to clocksource tsc
Aug 28 12:52:19 home-B70-80 kernel: [ 3.258147] ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 3.258149] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 28 12:52:19 home-B70-80 kernel: [ 3.307668] ata1.00: configured for UDMA/133
Aug 28 12:52:19 home-B70-80 kernel: [ 3.307912] scsi 0:0:0:0: Direct-Access ATA ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308252] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308287] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308289] sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308305] sd 0:0:0:0: [sda] Write Protect is off
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 28 12:52:19 home-B70-80 kernel: [ 3.308328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 28 12:52:19 home-B70-80 kernel: [ 3.311679] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
Aug 28 12:52:19 home-B70-80 kernel: [ 3.321059] sda: sda1
Aug 28 12:52:19 home-B70-80 kernel: [ 3.321799] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372699] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372701] cdrom: Uniform CD-ROM driver Revision: 3.20
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372880] sr 1:0:0:0: Attached scsi CD-ROM sr0
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372970] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 28 12:52:19 home-B70-80 kernel: [ 36.142134] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 12:52:19 home-B70-80 kernel: [ 36.393000] random: crng init done
Aug 28 12:52:19 home-B70-80 kernel: [ 36.393002] random: 7 urandom warning(s) missed due to ratelimiting
Aug 28 12:52:19 home-B70-80 kernel: [ 37.710119] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 28 12:52:19 home-B70-80 kernel: [ 40.374398] lp: driver loaded but no devices found
Aug 28 12:52:19 home-B70-80 kernel: [ 40.417483] ppdev: user-space parallel port driver
Aug 28 12:52:19 home-B70-80 kernel: [ 40.684999] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
Aug 28 12:52:19 home-B70-80 kernel: [ 56.684715] audit: type=1400 audit(1535453532.680:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=618 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.684718] audit: type=1400 audit(1535453532.680:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=618 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.685995] audit: type=1400 audit(1535453532.680:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.685999] audit: type=1400 audit(1535453532.680:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.686002] audit: type=1400 audit(1535453532.680:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=622 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.686881] audit: type=1400 audit(1535453532.680:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=623 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783796] audit: type=1400 audit(1535453532.776:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783800] audit: type=1400 audit(1535453532.776:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783803] audit: type=1400 audit(1535453532.776:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 56.783805] audit: type=1400 audit(1535453532.776:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
Aug 28 12:52:19 home-B70-80 kernel: [ 57.006103] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 28 12:52:19 home-B70-80 kernel: [ 57.048800] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
Aug 28 12:52:19 home-B70-80 kernel: [ 57.162007] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180361] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180659] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180661] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180664] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180665] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180666] snd_hda_codec_conexant hdaudioC1D0: inputs:
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180668] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
Aug 28 12:52:19 home-B70-80 kernel: [ 57.180670] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
Aug 28 12:52:19 home-B70-80 kernel: [ 57.181535] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
Aug 28 12:52:19 home-B70-80 kernel: [ 57.184663] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
Aug 28 12:52:19 home-B70-80 kernel: [ 57.184712] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245636] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245637] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245638] RAPL PMU: hw unit of domain package 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245639] RAPL PMU: hw unit of domain dram 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.245639] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374551] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374616] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374669] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374721] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
Aug 28 12:52:19 home-B70-80 kernel: [ 57.374777] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
Aug 28 12:52:19 home-B70-80 kernel: [ 57.811537] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 28 12:52:19 home-B70-80 kernel: [ 57.813301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 28 12:52:19 home-B70-80 kernel: [ 58.136353] AVX2 version of gcm_enc/dec engaged.
Aug 28 12:52:19 home-B70-80 kernel: [ 58.136354] AES CTR mode by8 optimization enabled
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462951] Bluetooth: Core ver 2.22
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462970] NET: Registered protocol family 31
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462971] Bluetooth: HCI device and connection manager initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462974] Bluetooth: HCI socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462977] Bluetooth: L2CAP socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.462982] Bluetooth: SCO socket layer initialized
Aug 28 12:52:19 home-B70-80 kernel: [ 58.580295] usbcore: registered new interface driver btusb
Aug 28 12:52:19 home-B70-80 kernel: [ 58.593585] Bluetooth: hci0: read Intel version: 3707100100012d0d27
Aug 28 12:52:19 home-B70-80 kernel: [ 58.593586] Bluetooth: hci0: Intel device is already patched. patch num: 27
Aug 28 12:52:19 home-B70-80 kernel: [ 59.716014] Intel(R) Wireless WiFi driver for Linux
Aug 28 12:52:19 home-B70-80 kernel: [ 59.716015] Copyright(c) 2003- 2015 Intel Corporation
Aug 28 12:52:19 home-B70-80 kernel: [ 59.841396] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944249] intel_rapl: Found RAPL domain package
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944251] intel_rapl: Found RAPL domain core
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944252] intel_rapl: Found RAPL domain uncore
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944253] intel_rapl: Found RAPL domain dram
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944255] intel_rapl: RAPL package 0 domain package locked by BIOS
Aug 28 12:52:19 home-B70-80 kernel: [ 59.944260] intel_rapl: RAPL package 0 domain dram locked by BIOS
Aug 28 12:52:19 home-B70-80 kernel: [ 60.433939] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
Aug 28 12:52:19 home-B70-80 kernel: [ 60.456057] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
Aug 28 12:52:19 home-B70-80 kernel: [ 60.565760] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Aug 28 12:52:19 home-B70-80 kernel: [ 60.695710] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Aug 28 12:52:19 home-B70-80 kernel: [ 61.014663] media: Linux media interface: v0.10
Aug 28 12:52:19 home-B70-80 kernel: [ 61.099726] Linux video capture interface: v2.00
Aug 28 12:52:19 home-B70-80 kernel: [ 61.433197] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435704] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435706] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435707] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435794] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435867] usbcore: registered new interface driver uvcvideo
Aug 28 12:52:19 home-B70-80 kernel: [ 61.435868] USB Video Class driver (1.1.1)
Aug 28 12:52:19 home-B70-80 kernel: [ 62.888373] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k FS
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873708] Bluetooth: BNEP filters: protocol multicast
Aug 28 12:52:19 home-B70-80 kernel: [ 63.873711] Bluetooth: BNEP socket layer initialized
Aug 28 12:52:24 home-B70-80 kernel: [ 68.681742] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 12:52:24 home-B70-80 kernel: [ 68.818106] r8169 0000:02:00.0 enp2s0: link down
Aug 28 12:52:24 home-B70-80 kernel: [ 68.818209] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 12:52:24 home-B70-80 kernel: [ 68.822305] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:24 home-B70-80 kernel: [ 68.972604] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:25 home-B70-80 kernel: [ 69.335750] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 12:52:28 home-B70-80 kernel: [ 72.661808] wlp3s0: authenticate with a0:64:8f:38:b2:c9
Aug 28 12:52:28 home-B70-80 kernel: [ 72.667808] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.669275] wlp3s0: authenticated
Aug 28 12:52:28 home-B70-80 kernel: [ 72.676053] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.677388] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
Aug 28 12:52:28 home-B70-80 kernel: [ 72.688831] wlp3s0: associated
Aug 28 12:52:28 home-B70-80 kernel: [ 72.718440] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Aug 28 12:52:28 home-B70-80 kernel: [ 72.761848] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960620] Bluetooth: RFCOMM TTY layer initialized
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960624] Bluetooth: RFCOMM socket layer initialized
Aug 28 12:52:34 home-B70-80 kernel: [ 78.960629] Bluetooth: RFCOMM ver 1.11
Aug 28 12:52:38 home-B70-80 kernel: [ 82.916747] rfkill: input handler disabledHors ligne
#18 Le 28/08/2018, à 13:51
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Ce que je peux faire c'est prendre mon autre disque dure 500GB
refaire une installation complète avec partitionnement manuel du type
/boot =1GB
/var =10GB
swap =9GB
/home =400GB
/ =80GB
sans LVM
et voir si le démarrage est plus rapide
Est ce cela pourrais avoir un incidence?
merci
Hors ligne
#19 Le 28/08/2018, à 13:59
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372970] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 28 12:52:19 home-B70-80 kernel: [ 36.142134] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)et
Aug 28 12:52:19 home-B70-80 kernel: [ 3.372970] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 28 12:52:19 home-B70-80 kernel: [ 36.142134] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)Là, tu as un laps de temps d'un peu plus de 30s.
STP, peux tu donner le retour de :
cat /etc/fstabHors ligne
#20 Le 28/08/2018, à 14:11
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
oui je vois les 33 secondes
donc cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0Hors ligne
#21 Le 28/08/2018, à 15:17
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Je m'attendais à voir de l'UUID, ce qui n'est pas le cas, du genre :
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=2d333df9-0dc6-45c7-b531-83679b916595 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e3ee8956-e471-49c0-951e-0ce8a563c35b none swap sw 0 0Sauf éventuellement pour le swap, puisque sous la 18.04 ça peut être géré au travers d'un fichier.
STP, peux tu faire :
sudo blkid -o listDernière modification par NicoApi73 (Le 28/08/2018, à 15:21)
Hors ligne
#22 Le 28/08/2018, à 15:30
- f.vuilliomenet
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
oui j'avoue qu'il y a de changement entre la 16.04 et 18.04 et c'est assé perturbant pour quelqu'un comme moi
sudo blkid -o list
device fs_type label mount point UUID
----------------------------------------------------------------------------------------------------------------------------------------------
/dev/sda1 LVM2_member (utilisé) aK7FHd-6wHV-Knia-XYP4-7Cie-Vfx5-xvWEN6
/dev/mapper/ubuntu--vg-root ext4 / 24b65ecb-e52b-4d5c-bc73-105b13df50ae
/dev/loop0 squashfs /snap/xnviewmp/3
/dev/loop1 squashfs /snap/gimp/40
/dev/loop2 squashfs /snap/gnome-calculator/178
/dev/loop3 squashfs /snap/ffmpeg/3
/dev/loop4 squashfs /snap/libreoffice/79
/dev/loop5 squashfs /snap/gnome-3-26-1604/64
/dev/loop6 squashfs /snap/gnome-calculator/199
/dev/loop7 squashfs /snap/gnome-system-monitor/54
/dev/loop8 squashfs /snap/libreoffice/76
/dev/loop9 squashfs /snap/gnome-logs/40
/dev/loop10 squashfs /snap/gnome-characters/117
/dev/loop11 squashfs /snap/core/4917
/dev/loop12 squashfs /snap/gnome-3-26-1604/70
/dev/loop13 squashfs /snap/libreoffice/80
/dev/loop14 squashfs /snap/core/4830
/dev/loop15 squashfs /snap/core/5145
/dev/loop16 squashfs /snap/skype/51
/dev/loop17 squashfs /snap/gnome-logs/37
/dev/loop18 squashfs /snap/ffmpeg/206
/dev/loop19 squashfs /snap/gnome-logs/34
/dev/loop20 squashfs /snap/gnome-3-26-1604/62
/dev/loop21 squashfs /snap/gnome-system-monitor/45
/dev/loop22 squashfs /snap/gtk-common-themes/319
/dev/loop23 squashfs /snap/ffmpeg/13
/dev/loop24 squashfs /snap/gimp/39
/dev/loop25 squashfs /snap/gnome-calculator/180
/dev/loop26 squashfs /snap/gnome-system-monitor/51
/dev/loop28 squashfs /snap/gnome-characters/101
/dev/loop29 squashfs /snap/gnome-characters/103
/dev/mapper/ubuntu--vg-swap_1 swap [SWAP] 90acbfec-9543-4b21-b61a-b6ea6360e99c
/dev/loop30 squashfs /snap/core18/19
/dev/loop31 squashfs /snap/gimp/47Hors ligne
#23 Le 28/08/2018, à 15:40
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Le format "inhabituel" du fstab doit venir de LVM. J'espère que quelqu'un de plus expérimenté va passer pour donner quelques éclaircissements.
Hors ligne
#24 Le 28/08/2018, à 15:46
- Mornagest
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Ton temps de démarrage est extrêmement long car le système démarre à chaque fois une de ces "partitions" /dev/loop", et comme il y en a 15...
Je pense qu'il vaut mieux que tu refasses une installation propre avec une /home et un /boot séparés, comme tu le suggères en #18.
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#25 Le 28/08/2018, à 16:00
- NicoApi73
Re : [Résolu] Démarrage très lent Ubuntu 18.04.1
Les /dev/loop sont des snap. Si f.vuilliomenet refait son installation comme il l'a faite, même sans LVM, il aura le même résultat. Sais tu s'il y a une option à désélectionner pour éviter ceci?
Hors ligne