#1 Le 27/12/2018, à 15:42
- acleade
marche arrière
Hello,
J'ai tenté, en suivant un tuto trouvé sur internet, d'installer un client pour utiliser Onedrive sur ubuntu 18.04, sans succès. (depuis l'arrêt de Ubuntu One, je cherche l'équivalent,... c'est dur
Bref, j'ai au cours des différentes étapes vu quelques messages m'indiquant des défauts de permissions
he directory '/home/jean-paul/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag
ou de pb de dépendances
build-essential est déjà la version la plus récente (12.4ubuntu1).
build-essential passé en « installé manuellement ».
python3-dbus est déjà la version la plus récente (1.2.6-1).
python3-dbus passé en « installé manuellement ».
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :
Les paquets suivants contiennent des dépendances non satisfaites :
libssl-dev : Dépend: libssl1.1 (= 1.1.0g-2ubuntu4) mais 1.1.0g-2ubuntu4.3 devra être installé
Recommande: libssl-doc mais ne sera pas installé
python3-dev : Dépend: python3 (= 3.6.5-3) mais 3.6.7-1~18.04 devra être installé
Dépend: libpython3-dev (= 3.6.5-3) mais ne sera pas installé
Dépend: python3.6-dev (>= 3.6.5-2~) mais ne sera pas installé
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
des infos m'informant de l'échec de la manip du genre
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
Failed building wheel for psutil
Running setup.py clean for psutil
Successfully built onedrived onedrivesdk zgitignore tabulate daemonocle inotify-simple arrow
Failed to build psutil
Installing collected packages: colorama, click, onedrivesdk, send2trash, zgitignore, tabulate, psutil, daemonocle, inotify-simple, bidict, python-dateutil, arrow, onedrived
The script tabulate is installed in '/home/jean-paul/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Certains retours étaient en orange ou rouge, mais en les copiant,...
Tant pis, pour Onedrive-D pour la démarche, mais comment puis-je faire marche arrière, c.a.d "désinstaller" ce que j'ai installé ou remettre la config d'origine?
avec mes remerciements anticipés...
16.04 LTS sur AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ × 2 - GeForce 7050 PV / nForce 630a/integrated/SSE2
18.04 LTS sur HP Intel® Core™ i7 CPU 870 @ 2.93GHz × 8 - GeForce 405/PCIe/SSE2
Xubuntu 14.04 sur eee pc1005HA
Hors ligne
#2 Le 27/12/2018, à 19:21
- noje
Re : marche arrière
Bonjour,
Tu as déjà un outil en ligne de commande pour synchroniser onedrive.
https://packages.ubuntu.com/bionic/onedrive
Mais perso trouve qu’il synchronise très mal dans le sens Ubuntu vers Onedrive et plante parfois.
En effets il y’a des dépendances non fournis, pourtant sur le tutoriel les packages dev sont bien précisés en installation.
Selon ton message tu devrais avoir des packages installés par la compilation, tape la commande ci-dessous pour lister les packages.
sudo dpkg-query -W | grep onedrive
Normalement devrais lister les pseudo packages présents liées à ta compilation.
Pour les enlever la commande ci-dessous, j’ai mis les noms de ceux que tu devrais avoir, selon retour de ta compilation.
sudo apt-get purge onedrived onedrivesdk
Fait nous un retour stp, et précise si bien compris tes attentes.
Dernière modification par noje (Le 27/12/2018, à 19:26)
- LTS 18.04 & 22.04 - jwm - cwm - zsh
Les seules vraies erreurs sont celles que nous commettons à répétition.
Les autres sont des occasions d'apprentissage. (Dalaï Lama)
Hors ligne
#3 Le 28/12/2018, à 19:32
- acleade
Re : marche arrière
Hello,
j'ai entré les commandes citées mais n'obtiens aucun résultat, donc à priori, aucun paquet n'est installé?
jean-paul@HP-UB:~$ sudo dpkg-query -W | grep onedrive
[sudo] Mot de passe de jean-paul :
jean-paul@HP-UB:~$ sudo apt-get purge onedrived onedrivesdk
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet onedrived
E: Impossible de trouver le paquet onedrivesdk
jean-paul@HP-UB:~$
voici le terminal complet d'hier, quand je n'avais posté que des extraits. S'il n'y a pas de paquets inutiles tant mieux mais du coup, les téléchargements listés vont dans un fichier temporaire?
jean-paul@HP-UB:~$ sudo apt-get install git
[sudo] Mot de passe de jean-paul :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
git est déjà la version la plus récente (1:2.17.1-1ubuntu0.4).
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
libnih-dbus1
Veuillez utiliser « sudo apt autoremove » pour le supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
jean-paul@HP-UB:~$ sudo apt autoremove
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
libnih-dbus1
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 55,3 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 194475 fichiers et répertoires déjà installés.)
Suppression de libnih-dbus1:amd64 (1.0.3-6ubuntu2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.27-3ubuntu1) ...
jean-paul@HP-UB:~$ sudo apt-get install python-setuptools
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
python-pkg-resources
Paquets suggérés :
python-setuptools-doc
Les NOUVEAUX paquets suivants seront installés :
python-pkg-resources python-setuptools
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 457 ko dans les archives.
Après cette opération, 1973 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://archive.ubuntu.com/ubuntu bionic/main amd64 python-pkg-resources all 39.0.1-2 [128 kB]
Réception de:2 http://archive.ubuntu.com/ubuntu bionic/main amd64 python-setuptools all 39.0.1-2 [329 *][/*]kB]
457 ko réceptionnés en 1s (887 ko/s)
Sélection du paquet python-pkg-resources précédemment désélectionné.
(Lecture de la base de données... 194473 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../python-pkg-resources_39.0.1-2_all.deb ...
Dépaquetage de python-pkg-resources (39.0.1-2) ...
Sélection du paquet python-setuptools précédemment désélectionné.
Préparation du dépaquetage de .../python-setuptools_39.0.1-2_all.deb ...
Dépaquetage de python-setuptools (39.0.1-2) ...
Paramétrage de python-pkg-resources (39.0.1-2) ...
Paramétrage de python-setuptools (39.0.1-2) ...
jean-paul@HP-UB:~$ ^M wget -O- https://bootstrap.pypa.io/get-pip.py | sudo python3
: commande introuvable
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ wget -O- https://bootstrap.pypa.io/get-pip.py | sudo python3
--2018-12-27 13:39:12-- https://bootstrap.pypa.io/get-pip.py
Résolution de bootstrap.pypa.io (bootstrap.pypa.io)… 151.101.120.175, 2a04:4e42:1d::175
Connexion à bootstrap.pypa.io (bootstrap.pypa.io)|151.101.120.175|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 1661676 (1,6M) [text/x-python]
Enregistre : «STDOUT»
- 100%[===================>] 1,58M 1,76MB/s ds 0,9s
2018-12-27 13:39:14 (1,76 MB/s) — envoi vers sortie standard [1661676/1661676]
The directory '/home/jean-paul/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
The directory '/home/jean-paul/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
Collecting pip
Downloading https://files.pythonhosted.org/packages/c2/d7/90f34cb0d83a6c5631cf71dfe64cc1054598c843a92b400e55675cc2ac37/pip-18.1-py2.py3-none-any.whl (1.3MB)
100% |████████████████████████████████| 1.3MB 2.8MB/s
Collecting setuptools
Downloading https://files.pythonhosted.org/packages/37/06/754589caf971b0d2d48f151c2586f62902d93dc908e2fd9b9b9f6aa3c9dd/setuptools-40.6.3-py2.py3-none-any.whl (573kB)
100% |████████████████████████████████| 573kB 2.0MB/s
Collecting wheel
Downloading https://files.pythonhosted.org/packages/ff/47/1dfa4795e24fd6f93d5d58602dd716c3f101cfd5a77cd9acbe519b44a0a9/wheel-0.32.3-py2.py3-none-any.whl
launchpadlib 1.10.6 requires testresources, which is not installed.
Installing collected packages: pip, setuptools, wheel
Successfully installed pip-18.1 setuptools-40.6.3 wheel-0.32.3
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ sudo pip3 install -U pip setuptools
The directory '/home/jean-paul/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
The directory '/home/jean-paul/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
Requirement already up-to-date: pip in /usr/local/lib/python3.6/dist-packages (18.1)
Requirement already up-to-date: setuptools in /usr/local/lib/python3.6/dist-packages (40.6.3)
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ sudo apt-get install build-essential python3-dev libssl-dev inotify-tools python3-dbus
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
build-essential est déjà la version la plus récente (12.4ubuntu1).
build-essential passé en « installé manuellement ».
python3-dbus est déjà la version la plus récente (1.2.6-1).
python3-dbus passé en « installé manuellement ».
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :
Les paquets suivants contiennent des dépendances non satisfaites :
libssl-dev : Dépend: libssl1.1 (= 1.1.0g-2ubuntu4) mais 1.1.0g-2ubuntu4.3 devra être installé
Recommande: libssl-doc mais ne sera pas installé
python3-dev : Dépend: python3 (= 3.6.5-3) mais 3.6.7-1~18.04 devra être installé
Dépend: libpython3-dev (= 3.6.5-3) mais ne sera pas installé
Dépend: python3.6-dev (>= 3.6.5-2~) mais ne sera pas installé
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
jean-paul@HP-UB:~$ pip3 install --user git+https://github.com/xybu/onedrived-dev.git
Collecting git+https://github.com/xybu/onedrived-dev.git
Cloning https://github.com/xybu/onedrived-dev.git to /tmp/pip-req-build-1dkj4crt
Requirement already satisfied: setuptools>=30.0.0 in /usr/local/lib/python3.6/dist-packages (from onedrived==2.0.0) (40.6.3)
Collecting colorama>=0.3.7 (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/4f/a6/728666f39bfff1719fc94c481890b2106837da9318031f71a8424b662e12/colorama-0.4.1-py2.py3-none-any.whl
Collecting click>=6.6 (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/fa/37/45185cb5abbc30d7257104c434fe0b07e5a195a6847506c074527aa599ec/Click-7.0-py2.py3-none-any.whl (81kB)
100% |████████████████████████████████| 81kB 1.4MB/s
Collecting onedrivesdk (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/d9/73/32677f3ffc420522c9ebf92aa5741bd19e6844a907a15b491fcbe2221d9f/onedrivesdk-1.1.8.zip (203kB)
100% |████████████████████████████████| 204kB 1.3MB/s
Requirement already satisfied: keyring>=10.1 in /usr/lib/python3/dist-packages (from onedrived==2.0.0) (10.6.0)
Collecting send2trash (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/49/46/c3dc27481d1cc57b9385aff41c474ceb7714f7935b1247194adae45db714/Send2Trash-1.5.0-py3-none-any.whl
Collecting zgitignore (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/fc/15/85a0520545b0788e76768ae371dd5f9b6c7a71d5165cf31e2ac89b184080/zgitignore-0.8.2.tar.gz
Requirement already satisfied: requests>2.9.1 in /usr/lib/python3/dist-packages (from onedrived==2.0.0) (2.18.4)
Collecting tabulate>=0.7.7 (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/12/c2/11d6845db5edf1295bc08b2f488cf5937806586afe42936c3f34c097ebdc/tabulate-0.8.2.tar.gz (45kB)
100% |████████████████████████████████| 51kB 2.1MB/s
Collecting daemonocle>=1.0.1 (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/9a/0d/e7b411174ccff6b342a80283b3dc9728807372b6a27febc279dd0f9057f2/daemonocle-1.0.1.tar.gz
Collecting inotify_simple (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/55/80/4bbd33f6d6b305c509a90b37c1cf7255000344f513b36827ec2c17af5ad5/inotify_simple-1.1.8.tar.gz
Collecting bidict (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/b0/d8/f324b2a7a9fa098b800dcb4b34aa3f2df955caf9235f20d351ceed9e7c22/bidict-0.17.5-py3-none-any.whl (40kB)
100% |████████████████████████████████| 40kB 2.0MB/s
Collecting arrow (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/e0/86/4eb5228a43042e9a80fe8c84093a8a36f5db34a3767ebd5e1e7729864e7b/arrow-0.12.1.tar.gz (65kB)
100% |████████████████████████████████| 71kB 2.2MB/s
Collecting psutil (from onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/e3/58/0eae6e4466e5abf779d7e2b71fac7fba5f59e00ea36ddb3ed690419ccb0f/psutil-5.4.8.tar.gz (422kB)
100% |████████████████████████████████| 430kB 2.4MB/s
Requirement already satisfied: secretstorage in /usr/lib/python3/dist-packages (from keyring>=10.1->onedrived==2.0.0) (2.3.1)
Collecting python-dateutil (from arrow->onedrived==2.0.0)
Downloading https://files.pythonhosted.org/packages/74/68/d87d9b36af36f44254a8d512cbfc48369103a3b9e474be9bdfe536abfc45/python_dateutil-2.7.5-py2.py3-none-any.whl (225kB)
100% |████████████████████████████████| 235kB 2.5MB/s
Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil->arrow->onedrived==2.0.0) (1.11.0)
Building wheels for collected packages: onedrived, onedrivesdk, zgitignore, tabulate, daemonocle, inotify-simple, arrow, psutil
Running setup.py bdist_wheel for onedrived ... done
Stored in directory: /tmp/pip-ephem-wheel-cache-881jpgf1/wheels/54/b1/ce/ef383e67531ea4175ac11b0a11a3a199f185235444e90e5de3
Running setup.py bdist_wheel for onedrivesdk ... done
Stored in directory: /home/jean-paul/.cache/pip/wheels/8f/0c/f0/fe6e0677e05a8bfbd6c2b8d2034db9bcdc03f365545a990fff
Running setup.py bdist_wheel for zgitignore ... done
Stored in directory: /home/jean-paul/.cache/pip/wheels/a5/1a/fd/e26bfab075aa381f38fbc319c454a7dce45500e64334d351f5
Running setup.py bdist_wheel for tabulate ... done
Stored in directory: /home/jean-paul/.cache/pip/wheels/2a/85/33/2f6da85d5f10614cbe5a625eab3b3aebfdf43e7b857f25f829
Running setup.py bdist_wheel for daemonocle ... done
Stored in directory: /home/jean-paul/.cache/pip/wheels/90/55/3f/57ec329c9912a90a262f15eeb9afb9f9349b8b8416285c1294
Running setup.py bdist_wheel for inotify-simple ... done
Stored in directory: /home/jean-paul/.cache/pip/wheels/11/5d/7e/f325d21ffec71263368df56a2af6ab3c802e0e869abd4b3c03
Running setup.py bdist_wheel for arrow ... done
St*][/*]ored in directory: /home/jean-paul/.cache/pip/wheels/a3/dd/b2/d3b8d22e8136164c2e2c36ed42392531957cdf9c717065b28b
Running setup.py bdist_wheel for psutil ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-e2yvvbrr/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-975aerx3 --python-tag cp36:
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/psutil
copying psutil/_psposix.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psaix.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_exceptions.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_common.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_compat.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psosx.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/__init__.py -> build/lib.linux-x86_64-3.6/psutil
creating build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_memory_leaks.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.6/psutil/tests
running build_ext
building 'psutil._psutil_linux' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/psutil
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_VERSION=548 -DPSUTIL_LINUX=1 -I/usr/include/python3.6m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.6/psutil/_psutil_common.o
psutil/_psutil_common.c:9:10: fatal error: Python.h: Aucun fichier ou dossier de ce type
#include <Python.h>
^~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
Failed building wheel for psutil
Running setup.py clean for psutil
Successfully built onedrived onedrivesdk zgitignore tabulate daemonocle inotify-simple arrow
Failed to build psutil
Installing collected packages: colorama, click, onedrivesdk, send2trash, zgitignore, tabulate, psutil, daemonocle, inotify-simple, bidict, python-dateutil, arrow, onedrived
The script tabulate is installed in '/home/jean-paul/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Running setup.py install for psutil ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-e2yvvbrr/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-0uf5km9p/install-record.txt --single-version-externally-managed --compile --user --prefix=:
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.6
creating build/lib.linux-x86_64-3.6/psutil
copying psutil/_psposix.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psaix.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_exceptions.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psbsd.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pssunos.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pslinux.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_common.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_compat.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_pswindows.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/_psosx.py -> build/lib.linux-x86_64-3.6/psutil
copying psutil/__init__.py -> build/lib.linux-x86_64-3.6/psutil
creating build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_memory_leaks.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/__main__.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_posix.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_process.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_unicode.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_connections.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_aix.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_misc.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_bsd.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_osx.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_linux.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_windows.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/__init__.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_system.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_sunos.py -> build/lib.linux-x86_64-3.6/psutil/tests
copying psutil/tests/test_contracts.py -> build/lib.linux-x86_64-3.6/psutil/tests
running build_ext
building 'psutil._psutil_linux' extension
creating build/temp.linux-x86_64-3.6
creating build/temp.linux-x86_64-3.6/psutil
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSUTIL_POSIX=1 -DPSUTIL_VERSION=548 -DPSUTIL_LINUX=1 -I/usr/include/python3.6m -c psutil/_psutil_common.c -o build/temp.linux-x86_64-3.6/psutil/_psutil_common.o
psutil/_psutil_common.c:9:10: fatal error: Python.h: Aucun fichier ou dossier de ce type
#include <Python.h>
^~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-e2yvvbrr/psutil/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-0uf5km9p/install-record.txt --single-version-externally-managed --compile --user --prefix=" failed with error code 1 in /tmp/pip-install-e2yvvbrr/psutil/
jean-paul@HP-UB:~$ cd Téléchargements
jean-paul@HP-UB:~/Téléchargements$ unzip ngrok-stable-linux-amd64.zip
Archive: ngrok-stable-linux-amd64.zip
inflating: ngrok
jean-paul@HP-UB:~/Téléchargements$ sudo cp ngrok /usr/bin
jean-paul@HP-UB:~/Téléchargements$ onedrived-pref account add
onedrived-pref : commande introuvable
j'attends votre retour, et j'essaierai quand même la suggestion https://packages.ubuntu.com/bionic/onedrive, on verra ce que ça donne chez moi?
16.04 LTS sur AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ × 2 - GeForce 7050 PV / nForce 630a/integrated/SSE2
18.04 LTS sur HP Intel® Core™ i7 CPU 870 @ 2.93GHz × 8 - GeForce 405/PCIe/SSE2
Xubuntu 14.04 sur eee pc1005HA
Hors ligne
#4 Le 29/12/2018, à 02:11
- noje
Re : marche arrière
Installing collected packages: colorama, click, onedrivesdk, send2trash, zgitignore, tabulate, psutil, daemonocle, inotify-simple, bidict, python-dateutil, arrow, onedrived
The script tabulate is installed in '/home/jean-paul/.local/bin' which is not on PATH.
Regarde si dans le dossier /home/jean-paul/.local/bin
Vous avez les exécutables susnommés “collected packages”, c’est le résidu de la compilation.
- LTS 18.04 & 22.04 - jwm - cwm - zsh
Les seules vraies erreurs sont celles que nous commettons à répétition.
Les autres sont des occasions d'apprentissage. (Dalaï Lama)
Hors ligne
#5 Le 29/12/2018, à 08:42
- moko138
Re : marche arrière
the directory '/home/jean-paul/.cache/pip/http' or its parent directory is not owned by the current user
and the cache has been disabled.
Please check
the permissions
and owner of that directory.
If executing pip with sudo, you may want sudo's -H flag
1) Qu'est-ce que tu ne comprends pas ?
2) Montre, en séparant bien chaque retour :
cat /etc/apt/sources.list | grep -v ^#; echo; echo " = = = Et les ppa :"; cat /etc/apt/sources.list.d/*.list | grep -v ^#
dpkg -l | grep -i "file manager" | grep -v plugin | tr -s " " | cut -d" " -s -f1,2,3,4
history | grep sudo | tail -150
history | grep nautilus
ls -lAR ~ | grep " root "
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 29/12/2018, à 11:35
- acleade
Re : marche arrière
Bonjour,
à Noje
Regarde si dans le dossier /home/jean-paul/.local/bin
non je n'ai rien qu'un fichier nommé tabulates
à Moko138 :
Qu'est-ce que tu ne comprends pas ?
L'anglais, ça va . je comprends donc que je dois vérifier qui est a les permissions pour le répertoire cité. Et visiblement, ce n'est pas moi
par contre, utiliser un H-Flag pour Pip, pour moi, c'est plus du chinois que de l'anglais et je maitrise moins
jean-paul@HP-UB:~$ cat /etc/apt/sources.list | grep -v ^#; echo; echo " = = = Et les ppa :"; cat /etc/apt/sources.list.d/*.list | grep -v ^#
deb http://archive.ubuntu.com/ubuntu bionic main universe
= = = Et les ppa :
deb https://download.mono-project.com/repo/ubuntu stable-bionic main
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ dpkg -l | grep -i "file manager" | grep -v plugin | tr -s " " | cut -d" " -s -f1,2,3,4
ii a11y-profile-manager-indicator 0.1.11-0ubuntu4 amd64
ii liba11y-profile-manager-0.1-0:amd64 0.1.11-0ubuntu4 amd64
ii liba11y-profile-manager-data 0.1.11-0ubuntu4 all
ii nautilus 1:3.26.4-0~ubuntu18.04.2 amd64
ii unity-accessibility-profiles 0.1.11-0ubuntu4 all
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ history | grep sudo | tail -150
80 sudo apt-get install copy_agent
81 sudo apt-get install copy_agent-1.045.0363
93 sudo apt-get install debhelper
94 sudo apt-get autoremove
99 sudo /opt/copy-client/CopyAgent -intallOverlay
100 sudo /opt/copy-client/CopyAgent -installOverlay
108 sudo login adresseMail
125 sudo apt-get autoremove
139 sudo apt-get update
140 sudo dpkg-reconfigure nvidia-331
141 sudo dpkg-reconfigure nvidia-331-uvm
144 sudo hubic login adresseMail
166 sudo add-apt-repository ppa:yannubuntu/boot-repair
167 sudo apt-get install boot-repair boot-info
168 sudo update-grub
170 sudo kill simple scan
171 sudo add-apt-repository ^a:nvbn-rm/ppa
172 sudo add-apt-repository ppa:nvbn-rm/ppa
173 sudo apt-get install everpad
174 sudo apt-get install wine
176 sudo apt-get install wine 1.8
177 sudo apt-get install wine
178 sudo dpkg --configure -
179 sudo dpkg -- configure -wine
181 sudo apt-get wine1.6
182 sudo apt-get install everpad
183 sudo apt-get install nixnote
186 sudo apt-get install ca-certificates apt-transport-https
187 wget -0 - https://ubuntu.cozycloud.cc/cozy.gpg.key 2>/dev/null | sudo apt-key add -
188 wget -O - https://ubuntu.cozycloud.cc/cozy.gpg.key 2>/dev/null | sudo apt-key add -
189 echo 'deb https://ubuntu.cozycloud.cc/debian trusty cozy' | sudo tee /etc/apt/sources.list.d/cozy.list > /dev/null
190 sudo apt-get uptdate
191 sudo apt-get update
193 sudo apt-get install -y python-cozy-management
195 sudo cozy_management install_cozy
196 sudo apt-get install --install-recommends cozy
197 sudo apt-get build-dep epdfview
198 sudo apt-get build-dep cosy
199 echo 'deb https://ubuntu.cozycloud.cc/debian trusty cozy' sudo tee /etc/apt/sources.list.d/cozy.list > /dev/null
201 sudo apt-get install --install-recommends cozy
202 sudo openssl req -x509 -nodes -newkey rsa:2048 -keyout /etc/cozy/server.key -out /etc/cozy/server.crt -days 3650 -subj "/CN=YOUR.INSTANCE.URL"
204 sudo apt-get remove cozy
205 sudo apt-get autoremove
206 sudo apt-get autoremove
207 sudo apt-get autoremove
208 sudo apt-get autoremove
209 sudo hubic login adresseMail
210 sudo apt-get remove copy
211 sudo rm -rf /home/<user>/.config/autostart/CopyAgent.desktop
213 sudo rm -rf /home/jean-paul/.config/autostart/CopyAgent.desktop
219 sudo apt-get install sweetHome3D
220 sudo login hubic adresseMail
221 sudo apt-get login hubic adresseMail
222 sudo hubic login adresseMail
226 sudo apt-get update
227 sudo supervisorctl status
229 sudo hubic login adresseMail Dossier
237 sudo Ishw
240 sudo apt-get update
241 sudo apt-get update
242 sudo apt-get installer git
243 sudo apt-get install git
248 sudo apt-get install inst
250 sudo install
251 sudo apt-get install -f
254 sudo apt-get install hubic
260 sudo apt-get install gdebi
265 sudo apt-get update
266 sudo update-alternatives --config java
279 sudo apt-get install -f
280 sudo apt-get autoremove
311 sudo apt-get update
312 sudo apt-get install -f
313 sudo apt-get remove pciutils
314 sudo apt-get install -f
315 sudo apt-get install pciutils
316 sudo apt-get autoremove
317 sudo apt remove hubic
318 sudo apt autoremove
320 sudo synchronize
321 sudo hubic synchronize
331 sudo apt autoremove
332 sudo apt remove pciutils
333 sudo apt-get install pciutils
334 sudo apt install synaptic
335 sudo apt software-properties-gtk
336 sudo apt install gparted
337 sudo apt install gparted
338 sudo apt-get install -f
340 sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
342 sudo tee /etc/apt/sources.list.d/mono-official.list
343 sudo nano /etc/apt/sources.list.d/mono-official.list
345 sudo apt update
346 sudo apt update
348 sudo nano /etc/apt/sources.list.d/mono-official.list
350 sudo apt update
351 sudo apt install mono-devel
352 sudo hubic login adresseMail Dossier
356 sudo hubic status
357 sudo apt install hubic
358 sudo apt install hubic
361 sudo apt install hubic
363 sudo hubic login adresseMail Dossier
365 sudo hubic login
366 sudo apt-get f
367 sudo apt-get install -f
368 sudo apt autoremove
370 sudo apt-get install -f
407 sudo apt autoremove
408 sudo apt-get install -f
409 sudo mount -t "ntfs" -o
411 sudo mount -r "nfts" -o
412 sudo apt-get autoremove
414 sudo apt-get -f install
415 sudo apt-get update
416 sudo apt-get autoremove --purge
417 sudo apt-get update
418 sudo mount -t "ntfs" -o
419 sudo mount -t "ntfs" -ro
420 sudo mount -ro "ntfs" -o
421 sudo mount -ro "ntfs" -o
422 sudo mount -t "ntfs" -ro
423 sudo mount -t "ntfs" -o ro
424 sudo mount -t "ntfs" -o ro
425 sudo xed /etc/apt/sources.list.d/additional-repositories.list
430 sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
431 echo "deb https://download.mono-project.com/repo/ubuntu stable-bionic main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
436 sudo mv -v /etc/apt/sources.list /etc/apt/sources.list.old
437 sudo mv -v /etc/apt/sources.list /etc/apt/sources.list.old
438 sudo rm -v /etc/apt/sources.list.d/mono-official.list
439 sudo apt update
440 sudo apt full-upgrade
442 sudo apt-get autoremove
443 sudo apt autoremove
451 sudo apt install ca-certificates-mono
466 sudo login hubic adresseMail
468 sudo hubic login adresseMail
484 sudo apt-get install git
485 sudo apt autoremove
486 sudo apt-get install python-setuptools
wget -O- https://bootstrap.pypa.io/get-pip.py | sudo python3
488 wget -O- https://bootstrap.pypa.io/get-pip.py | sudo python3
489 sudo pip3 install -U pip setuptools
490 sudo apt-get install build-essential python3-dev libssl-dev inotify-tools python3-dbus
494 sudo cp ngrok /usr/bin
497 sudo dpkg-query -w
498 sudo dpkg-query -W | grep onedrive
499 sudo dpkg-query -W | grep onedrive
500 sudo apt-get purge onedrived onedrivesdk
503 history | grep sudo | tail -150
jean-paul@HP-UB:~$ history | grep nautilus
31 sudo apt-get install nautilus-image-converter
101 nautilus -q
102 nautilus -q
504 history | grep nautilus
jean-paul@HP-UB:~$
jean-paul@HP-UB:~$ ls -lAR ~ | grep " root "
-rw------- 1 root root 1024 avril 10 2016 .rnd
-rw-r--r-- 1 root root 119773 sept. 5 2015 Boot-Info_2015-09-05__12h12.txt
-rwxr-xr-x 1 root root 44386 janv. 4 2014 hpmudext.soT
-rwxr-xr-x 1 root root 508903 janv. 4 2014 libsane-hpaio.so.1.0.0T
Modération: attention à ne pas laisser d'adresse mail/mots de passe dans tes retours, je te laisse vérifier qu'il n'y en a plus
Dernière modification par acleade (Le 30/12/2018, à 18:15)
16.04 LTS sur AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ × 2 - GeForce 7050 PV / nForce 630a/integrated/SSE2
18.04 LTS sur HP Intel® Core™ i7 CPU 870 @ 2.93GHz × 8 - GeForce 405/PCIe/SSE2
Xubuntu 14.04 sur eee pc1005HA
Hors ligne
#7 Le 30/12/2018, à 18:24
- acleade
Re : marche arrière
Désolé pour les adresses mail, je n'ai pas pensé à les modifier.
Pour les mdp, ils n'apparaissent pas de toutes façon?
merci
16.04 LTS sur AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ × 2 - GeForce 7050 PV / nForce 630a/integrated/SSE2
18.04 LTS sur HP Intel® Core™ i7 CPU 870 @ 2.93GHz × 8 - GeForce 405/PCIe/SSE2
Xubuntu 14.04 sur eee pc1005HA
Hors ligne
#8 Le 30/12/2018, à 18:51
- moko138
Re : marche arrière
D'abord, redevenir propriétaire de ton home :
Sans rien y changer, copie-colle et exécute ceci :
sudo chown -Rc $USER:$USER /home/$USER
- -
Quand ce sera fait, compare les droits dans
moko@pc:~$ ls -la ~/.cache
total 72
drwxr-xr-x 18 moko moko 4096 déc. 27 22:58 .
drwxr-xr-x 40 moko moko 4096 déc. 30 10:33 ..
drwx------ 2 moko moko 4096 déc. 24 05:57 dconf
drwxr-xr-x 3 moko moko 4096 mars 31 2018 dPluzz
drwxr-xr-x 3 moko moko 4096 déc. 3 04:25 geeqie
drwx------ 3 moko moko 4096 mars 25 2018 gegl-0.2
drwxr-xr-x 4 moko moko 4096 avril 11 2018 gnome-mplayer
drwx------ 2 moko moko 4096 sept. 3 05:08 keyring-***
drwx------ 2 moko moko 4096 déc. 27 22:58 keyring-nnnn
drwx------ 2 moko moko 4096 nov. 11 20:29 keyring-xxxxx
drwx------ 2 moko moko 4096 déc. 9 06:21 keyring-yyyyy
drwx------ 4 moko moko 4096 avril 14 2018 mozilla
drwxr-xr-x 3 moko moko 4096 déc. 27 22:58 openbox
drwx------ 2 moko moko 4096 mars 24 2018 Thunar
drwx------ 3 moko moko 4096 mars 29 2018 vlc
moko@pc:~$
avec les droits dans le retour chez toi de
ls -la ~/.cache
Si tu as des doutes, montre le retour chez toi.
- -
Ton /etc/apt/sources.list | grep -v ^#
deb http://archive.ubuntu.com/ubuntu bionic main universe
est vraiment étique. Il faudra l'étoffer !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 30/12/2018, à 19:23
- acleade
Re : marche arrière
Hello,
j'ai 592 lignes, quand tu en as 72 ! sans doute plein de trucs obsolètes ou inutiles.
chez toi, la colonne après moko affiche 4096 partout.
moi j'ai parfois beaucoup plus.
jean-paul@HP-UB:~$ ls -la ~/.cache
total 592
drwx------ 82 jean-paul jean-paul 4096 déc. 27 13:49 .
drwxr-xr-x 86 jean-paul jean-paul 36864 déc. 30 18:03 ..
drwx------ 2 jean-paul jean-paul 4096 déc. 17 18:38 babl
drwxr-xr-x 3 jean-paul jean-paul 4096 oct. 12 2011 banshee-1
drwx------ 3 jean-paul jean-paul 4096 oct. 29 2011 chromium
drwx------ 2 jean-paul jean-paul 4096 nov. 30 22:14 compizconfig-1
drwx------ 2 jean-paul jean-paul 4096 janv. 21 2013 dconf
drwxrwxr-x 3 jean-paul jean-paul 4096 juin 16 2015 deja-dup
drwx------ 3 jean-paul jean-paul 4096 mai 5 2012 desktop-couch
-rw-r--r-- 1 jean-paul jean-paul 12288 avril 29 2012 event-sound-cache.tdb.14030e53cb631a3d0889f7f90000000b.x86_64-pc-linux-gnu
-rw-r--r-- 1 jean-paul jean-paul 12288 juin 18 2016 event-sound-cache.tdb.426c3814dd3af1f7c33c466150fdab89.x86_64-pc-linux-gnu
-rw-r--r-- 1 jean-paul jean-paul 12288 janv. 18 2013 event-sound-cache.tdb.89482e3341312c112d9cacc700000013.x86_64-pc-linux-gnu
-rw-r--r-- 1 jean-paul jean-paul 16384 déc. 10 21:16 event-sound-cache.tdb.96910d835ab14cb1b4ad4f4e437f2ab0.x86_64-pc-linux-gnu
drwx------ 10 jean-paul jean-paul 4096 avril 9 2013 evolution
drwx------ 3 jean-paul jean-paul 4096 mai 14 2012 folks
drwxr-xr-x 2 jean-paul jean-paul 24576 déc. 9 16:04 fontconfig
drwx------ 2 jean-paul jean-paul 4096 mai 21 2012 .fr-4RtEFE
drwx------ 2 jean-paul jean-paul 4096 juin 4 2012 .fr-8mNspv
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-8MuH7q
drwx------ 2 jean-paul jean-paul 4096 juin 4 2012 .fr-9cIaRn
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-9ruxk0
drwx------ 2 jean-paul jean-paul 4096 juin 18 2013 .fr-dfLKvi
drwx------ 2 jean-paul jean-paul 4096 juil. 20 2013 .fr-Eb0js1
drwxr--r-- 2 jean-paul jean-paul 4096 mai 12 2014 freetuxtv
drwx------ 2 jean-paul jean-paul 4096 juin 18 2013 .fr-ilLEim
drwx------ 2 jean-paul jean-paul 4096 juin 4 2012 .fr-iwcfcz
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-MjETpN
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-nwq9Yh
drwx------ 2 jean-paul jean-paul 4096 juil. 20 2013 .fr-Qd054v
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-sCphe7
drwx------ 2 jean-paul jean-paul 4096 mai 15 2014 .fr-TxqaeZ
drwx------ 2 jean-paul jean-paul 4096 juin 4 2012 .fr-VtHdOl
drwxr-xr-x 2 jean-paul jean-paul 4096 sept. 14 2012 gcalctool
drwx------ 3 jean-paul jean-paul 4096 févr. 21 2013 gegl-0.2
drwx------ 3 jean-paul jean-paul 4096 nov. 15 2016 gegl-0.3
drwxr-xr-x 2 jean-paul jean-paul 4096 déc. 10 2017 gnome-calculator
drwx------ 2 jean-paul jean-paul 4096 mai 19 2012 gnome-screenshot
drwx------ 3 jean-paul jean-paul 4096 déc. 4 20:41 gnome-shell-portal-helper
drwxrwxr-x 8 jean-paul jean-paul 4096 déc. 19 20:00 gnome-software
drwxrwxr-x 2 jean-paul jean-paul 4096 déc. 27 11:16 gstreamer-1.0
drwx------ 2 jean-paul jean-paul 4096 mai 5 2012 gvfs-burn
drwxrwxr-x 2 jean-paul jean-paul 4096 mai 1 2012 gwibber
drwxr-xr-x 3 jean-paul jean-paul 4096 nov. 10 2013 ibus
drwxrwxr-x 2 jean-paul jean-paul 4096 nov. 30 23:49 ibus-table
drwxrwxr-x 5 jean-paul jean-paul 4096 déc. 26 2016 icedtea-web
drwx------ 3 jean-paul jean-paul 4096 mai 5 2012 indicator
-rw-r--r-- 1 jean-paul jean-paul 1174 juil. 30 2011 indicator-applet-complete.log
drwx------ 2 jean-paul jean-paul 4096 déc. 26 2016 indicator-appmenu
drwx------ 3 jean-paul jean-paul 4096 juil. 30 2011 indicators
drwx------ 2 jean-paul jean-paul 4096 nov. 30 23:49 libgweather
drwxr-xr-x 3 jean-paul jean-paul 4096 nov. 4 2012 libimobiledevice
drwxrwxr-x 3 jean-paul jean-paul 4096 nov. 24 2016 livecommaillivecom
drwxr-xr-x 2 jean-paul jean-paul 4096 nov. 30 22:15 logrotate
drwxr-x--- 3 jean-paul jean-paul 4096 févr. 16 2012 media-art
drwxr-xr-x 111 jean-paul jean-paul 4096 juin 4 2018 mesa
drwxr-xr-x 73 jean-paul jean-paul 4096 déc. 30 11:42 mesa_shader_cache
drwx------ 5 jean-paul jean-paul 4096 nov. 26 2012 midori
-rw-r--r-- 1 jean-paul jean-paul 0 oct. 3 2011 motd.legal-displayed
drwx------ 3 jean-paul jean-paul 4096 mai 17 2013 mozilla
-rw-r--r-- 1 jean-paul jean-paul 0 mai 5 2012 notify-osd.log
drwxrwxr-x 5 jean-paul jean-paul 4096 janv. 21 2013 oneconf
drwxrwxr-x 2 jean-paul jean-paul 4096 févr. 28 2014 pdfmod
drwx------ 4 jean-paul jean-paul 4096 déc. 27 13:49 pip
drwx------ 3 jean-paul jean-paul 4096 mai 12 2012 rhythmbox
drwxr-xr-x 3 jean-paul jean-paul 4096 janv. 29 2013 shotwell
drwx------ 3 jean-paul jean-paul 4096 déc. 18 20:00 simple-scan
drwxr-xr-x 11 jean-paul jean-paul 4096 juil. 10 2016 software-center
drwxr-xr-x 2 jean-paul jean-paul 4096 janv. 28 2015 sso
drwx------ 3 jean-paul jean-paul 4096 août 2 2011 telepathy
drwx------ 7 jean-paul jean-paul 4096 janv. 30 2016 thumbnails
drwx------ 3 jean-paul jean-paul 4096 sept. 21 2013 thunderbird
drwxr-xr-x 4 jean-paul jean-paul 4096 nov. 11 2016 totem
drwxr-xr-x 2 jean-paul jean-paul 4096 févr. 12 2012 tracker
drwxr-xr-x 3 jean-paul jean-paul 4096 avril 28 2013 transmission
drwxr-xr-x 4 jean-paul jean-paul 4096 août 1 2011 ubuntuone
drwx------ 2 jean-paul jean-paul 4096 nov. 30 23:54 ubuntu-report
drwxr-xr-x 2 jean-paul jean-paul 4096 avril 23 2015 unity
drwx------ 3 jean-paul jean-paul 4096 nov. 8 2016 unity-control-center
drwxrwxr-x 2 jean-paul jean-paul 4096 janv. 21 2013 unity-lens-photos
drwxrwxr-x 2 jean-paul jean-paul 4096 avril 22 2014 unity-lens-video
drwxr-xr-x 2 jean-paul jean-paul 4096 juin 30 2017 update-manager-core
drwx------ 2 jean-paul jean-paul 61440 nov. 30 23:46 upstart
-rw-r--r-- 1 jean-paul jean-paul 78329 nov. 25 2013 usb-creator.log
drwx------ 3 jean-paul jean-paul 4096 oct. 15 2011 vlc
drwx------ 2 jean-paul jean-paul 4096 nov. 30 22:15 wallpaper
drwx------ 3 jean-paul jean-paul 4096 mai 8 2014 webkit
drwx------ 2 jean-paul jean-paul 4096 déc. 4 20:45 webkitgtk
drwxrwxr-x 2 jean-paul jean-paul 4096 janv. 23 2016 winetricks
drwx------ 3 jean-paul jean-paul 4096 sept. 10 2017 yelp
drwxr-xr-x 2 jean-paul jean-paul 4096 mai 5 2012 zeitgeist
-rw-rw-r-- 1 jean-paul jean-paul 11 déc. 27 11:05 zeitgeist-vacuum.stamp
jean-paul@HP-UB:~$
Enfin, la dernière ligne, "Zeitgeist" j'ai regardé ce que c'était à cause du nom et je tombes là dessus
Perso, je désinstalle zeitgeist et tout logiciel d'indexation :
c'est gourmand en ressources et indiscret !
enfin, concernant les sources list, pour l'instant, ça m'a suffit mais je viens de changer de version...
16.04 LTS sur AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ × 2 - GeForce 7050 PV / nForce 630a/integrated/SSE2
18.04 LTS sur HP Intel® Core™ i7 CPU 870 @ 2.93GHz × 8 - GeForce 405/PCIe/SSE2
Xubuntu 14.04 sur eee pc1005HA
Hors ligne
#10 Le 30/12/2018, à 20:02
- moko138
Re : marche arrière
592, ce n'est pas le nombre de lignes, mais le poids en kilo-octets.
- -
le sources list, pour l'instant, ça m'a suffit
Ben non, justement !
mais je viens de changer de version
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne