#1 Le 08/01/2011, à 02:46
- pseudologos
grub 2
Bonjour,
Existe-t-il une ligne de commande pour savoir où Grub est installé? En fait j'ai 2 disques durs internes avec Lucid sur sdb. Sda est un disque de sauvegarde...
Hors ligne
#2 Le 08/01/2011, à 03:26
- chopinhauer
Re : grub 2
Tu peux chercher le premier secteur de chaque périphérique disque s'il contient la chaîne "GRUB" :
sudo dd if=/dev/disque_a_utiliser bs=512 count=1 | hexdump -e \"%_p\"
Cela peut bien sur être scripté :
#!/bin/sh
if [ `id -u` -ne 0 ]; then
echo Error: Must be run as \'root\'. >&2
exit 1
fi
if [ ! -f /boot/grub/device.map ]; then
grub-mkdevicemap --no-floppy
fi
for disk in `cut -f 2 /boot/grub/device.map`; do
for part in "$disk"*; do
if dd if="$part" bs=512 count=1 2>/dev/null | grep GRUB >/dev/null; then
echo Grub installed on: `readlink -f "$part"`
fi
done
done
Dernière modification par chopinhauer (Le 08/01/2011, à 07:13)
Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.
Hors ligne
#3 Le 08/01/2011, à 06:05
- YannUbuntu
Re : grub 2
bonjour
ca m'interesse aussi
@chaupinhauer: merci pour ce script interessant.
Mais il n'y a plus de device.map depuis 10.04 ou 9.10 ...
de plus, si grub a ete installe/ quelquepart puis reinstalle/ ailleurs, ce script risque de retourner les 2 emplacements.
Enfin, quid d'un grub sur / ?
Qu'en penses-tu?
à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison
Hors ligne
#4 Le 08/01/2011, à 07:19
- Compte anonymisé
Re : grub 2
#5 Le 08/01/2011, à 07:24
- chopinhauer
Re : grub 2
Normalement un device.map est créé lors de l'installation de Grub dans les secteurs de démarrage du disque.
Si des bouts d'installation de Grub se trouvent à plusieurs endroits, ils seront tous retournés, mais seul le premier sera celui utilisé au démarrage (la device.map donne en gros l'ordre dans lequel les disques sont utilisés au démarrage).
Pour ce qui est de la partie de Grub qui réside à l'intérieur du système de fichiers, elle est très bien gérée par le gestionnaire de paquets. C'est le morceau installé en dehors de tout système de fichiers qui est plus caché.
Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.
Hors ligne
#6 Le 08/01/2011, à 11:06
- YannUbuntu
Re : grub 2
ok merci. Ta modif du script corrige le problème en créant le fichier.
Deux points m'intriguent encore : a quoi servent "2>/dev/null" et ">/dev/null" ?
à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison
Hors ligne
#7 Le 08/01/2011, à 11:41
- cep
Re : grub 2
Bonjour,
Existe-t-il une ligne de commande pour savoir où Grub est installé? En fait j'ai 2 disques durs internes avec Lucid sur sdb. Sda est un disque de sauvegarde...
interessant le script, mais l'interêt de device.map étant maintenant moindre puisque non créé automatiquement, il y a une solution plus simple, voir la configuration du paquet grub avec debconf-show grub-pc.
Par exemple ainsi :
$ sudo debconf-show grub-pc |grep "install_devices:"
* grub-pc/install_devices: /dev/disk/by-id/ata-ExcelStor_Technology_J8160_PV2300Q40A2UWC-part2
qui nous dit qu'il est installé dans la partition 2 du disque ata-xxxxxx et cela pour la distribution concernée.
Voir si nécessaire :
ls -l /dev/disk/by-id/
sudo n'est pas nécessaire, il y aura un message d'erreur mais l'indication sera affichée.
Pour plus de détails et utilisation si nécessaire de dpkg-reconfigure pour réinstaller grub, ce qui est la solution la plus simple, voir :
Hors ligne
#8 Le 08/01/2011, à 11:46
- pseudologos
Re : grub 2
Bonjour et merci pour vos réponses,..
Pour moi qui suis novice sur Linux, j'avoue ne pas comprendre la différence entre script et commandes de terminal. En tous cas, je cherche le plus simple.
sudo dd if=/dev/disque_a_utiliser bs=512 count=1 | hexdump -e \"%_p\"
Je peux utiliser cette ligne de commandes sans risque ?
Excusez mon ignorance et merci pour votre aide.
Hors ligne
#9 Le 08/01/2011, à 12:11
- pseudologos
Re : grub 2
Merci cep
Voici ce que me dit mon terminal
$ sudo debconf-show grub-pc |grep "install_devices:"
* grub-pc/install_devices: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y27PCDLE
Autrement dit grub2 est installé sur maxtor... donc, chez moi, sur sda
C'est ce que je craignais. Voici la discussion que j'ai commencé sur un autre forum et qui motivait ma demande. Je serais heureux d'avoir vos avis :
http://forum.ubuntu-fr.org/viewtopic.php?id=437282
Merci beaucoup
Hors ligne
#10 Le 08/01/2011, à 12:24
- Compte anonymisé
Re : grub 2
Voir quand même le post #4 car pour la simplicité on ne peut pas faire + :
1) télécharger le script
2) l'exécuter
3) regarder le résultat dans le fichier RESULT.TXT
Dernière modification par Compte anonymisé (Le 08/01/2011, à 12:25)
#11 Le 08/01/2011, à 12:51
- pseudologos
Re : grub 2
J'essaie mais sans succès : je n'arrive pas à l'exécuter
ludovic@ludovic-desktop:~$ sudo bash ~ / Desktop / *. sh boot_info_script
[sudo] password for ludovic:
/home/ludovic: /home/ludovic : ceci est un répertoire
ludovic@ludovic-desktop:~$ sudo bash ~ / bureau / *. sh boot_info_script
/home/ludovic: /home/ludovic : ceci est un répertoire
ludovic@ludovic-desktop:~$ sudo bash [ /home/ludovic/bureau ] / boot_info_script *. sh
/usr/bin/[: /usr/bin/[ : fichier binaire impossible à lancer
ludovic@ludovic-desktop:~$ sudo bash / home / ludovic / bureau / boot_info_script *. sh
/: / : ceci est un répertoire
ludovic@ludovic-desktop:~$ sudo bash ~/Desktop/boot_info_script*.sh
bash: /home/ludovic/Desktop/boot_info_script*.sh: Aucun fichier ou dossier de ce type
ludovic@ludovic-desktop:~$ sudo bash /home/ludovic/bureau/boot_info_script055*.sh
bash: /home/ludovic/bureau/boot_info_script055*.sh: Aucun fichier ou dossier de ce type
ludovic@ludovic-desktop:~$ sudo bash ~ /home/ludovic/Bureau/boot_info_script055.sh
/home/ludovic: /home/ludovic : ceci est un répertoire
ludovic@ludovic-desktop:~$
Hors ligne
#12 Le 08/01/2011, à 12:54
- cep
Re : grub 2
Voici ce que me dit mon terminal
$ sudo debconf-show grub-pc |grep "install_devices:"
* grub-pc/install_devices: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y27PCDLE
Autrement dit grub2 est installé sur maxtor... donc, chez moi, sur sda
Alors, pour lancer un script il faut généralement le rédiger dans un fichier, rendre ce script exécutable et lancer le script. Bien sûr on peut faire cela plus simplement.
Une commande dans un terminal se passe simplement, comme celle que tu lances avec debconf-show grub-pc ou un simple ls -l pour lister un répertoire.
Pour la commande debconf-show grub-pc on peut faire plus simple dans la façon d'afficher le résultat, par exemple avec ceppte commande :
for grub in `debconf-show grub-pc | awk '/install_devices:/ {print $3}'` ; do ls -l "$grub" ; done
Bien faire attention aux guillemets et sens des guillements. Ce qui donnera par exemple :
$ for grub in `debconf-show grub-pc | awk '/install_devices:/ {print $3}'` ; do ls -l "$grub" ; done
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission non accordée
lrwxrwxrwx 1 root root 10 6 janv. 19:35 /dev/disk/by-id/ata-ExcelStor_Technology_J8160_PV2300Q40A2UWC-part2 -> ../../sda2
Je laisse volontairement cette présentation car la commande est lancée sans sudo. Se méfier des commandes avec sudo que l'on ne comprend pas et des scripts miracle trouvés sur les forums.
Dernière modification par cep (Le 08/01/2011, à 13:02)
Hors ligne
#13 Le 08/01/2011, à 12:55
- cep
Re : grub 2
Voir quand même le post #4 car pour la simplicité on ne peut pas faire + :
1) télécharger le script
2) l'exécuter
3) regarder le résultat dans le fichier RESULT.TXT
sans commentaire
Hors ligne
#14 Le 08/01/2011, à 13:06
- ar barzh paour
Re : grub 2
essaie ceci
sudo bash /home/ludovic/Bureau/boot_info_script055.sh
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 22.04, 22.04, 23.04
Portable1 : Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz RAM 4GiB DDR2 667 MHz Ubuntu 23.04 ( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#15 Le 08/01/2011, à 13:12
- ar barzh paour
Re : grub 2
et le script s'en tire bien pour moi...
vu la configuration de mes disques avec windows, ubuntu 10.04 , ubuntu 10.04 et ubuntu 10.10 !!!!!!!!!!!!!!!!!!!!!
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #7 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdc and looks on the same drive in
partition #5 for (,msdos5)/boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda4: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb6: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb7: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb8: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb9: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdc1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdc2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc3: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc6: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 174,080,339 174,080,277 7 HPFS/NTFS
/dev/sda2 518,144,445 862,208,549 344,064,105 7 HPFS/NTFS
/dev/sda3 174,080,340 518,144,444 344,064,105 83 Linux
/dev/sda4 862,208,550 976,768,064 114,559,515 7 HPFS/NTFS
Drive: sdb ___________________ _____________________________________________________
Disque /dev/sdb: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 * 63 261,052,998 261,052,936 7 HPFS/NTFS
/dev/sdb2 261,054,462 976,768,064 715,713,603 5 Extended
/dev/sdb5 492,263,793 738,480,747 246,216,955 83 Linux
/dev/sdb6 958,646,808 976,768,064 18,121,257 82 Linux swap / Solaris
/dev/sdb7 261,054,464 482,779,135 221,724,672 83 Linux
/dev/sdb8 482,781,184 492,263,423 9,482,240 82 Linux swap / Solaris
/dev/sdb9 738,492,048 958,646,744 220,154,697 83 Linux
Drive: sdc ___________________ _____________________________________________________
Disque /dev/sdc: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 * 63 102,398,309 102,398,247 7 HPFS/NTFS
/dev/sdc2 102,398,310 215,046,089 112,647,780 7 HPFS/NTFS
/dev/sdc3 215,046,090 856,071,719 641,025,630 7 HPFS/NTFS
/dev/sdc4 856,072,190 976,771,071 120,698,882 5 Extended
/dev/sdc5 856,072,192 959,588,351 103,516,160 83 Linux
/dev/sdc6 959,590,400 976,771,071 17,180,672 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 A078A27E78A252B8 ntfs XPa1
/dev/sda2 7EAEECD2533E7DAB ntfs S_Data_a2
/dev/sda3 09e9e7c8-a78a-4270-aee1-db55a446ecc3 ext4 S_home_a3
/dev/sda4 5B59C3115FC22FD3 ntfs S_Z_a4
/dev/sda: PTTYPE="dos"
/dev/sdb1 78684472684430E4 ntfs XPb1
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 8d6c97e8-8c26-430c-8353-2b35b82c73d1 ext4 Ub5
/dev/sdb6 de7c7e33-a5b4-4bd4-be64-e1e59ae987a6 swap
/dev/sdb7 6c2442e5-3543-4bec-9f70-210ecf652610 ext4 Ub7
/dev/sdb8 d32720eb-3bc9-4f30-877f-f939c9472be2 swap
/dev/sdb9 b703721e-397f-49c4-a30e-8de5e623d55f ext4 N_home
/dev/sdb: PTTYPE="dos"
/dev/sdc1 8C5411AF54119CD0 ntfs XPc1
/dev/sdc2 08E74A35596CFF0A ntfs Z_c2
/dev/sdc3 64CC92B54362A231 ntfs Data_c3
/dev/sdc4: PTTYPE="dos"
/dev/sdc5 209f6a9c-4342-4780-89ae-4fa14d0c3365 ext4 Uc5
/dev/sdc6 9621a614-a277-437c-9a73-1a066b4587c3 swap
/dev/sdc: PTTYPE="dos"
error: /dev/sdd: No medium found
error: /dev/sde: No medium found
error: /dev/sdf: No medium found
error: /dev/sdg: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdc5 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdb9 /home ext4 (rw,commit=0)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /noexecute=optin /fastdetect
================================ sdb1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /noexecute=optin /fastdetect
=========================== sdb5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=-1
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-25-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 8d6c97e8-8c26-430c-8353-2b35b82c73d1
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=8d6c97e8-8c26-430c-8353-2b35b82c73d1 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 8d6c97e8-8c26-430c-8353-2b35b82c73d1
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 8d6c97e8-8c26-430c-8353-2b35b82c73d1
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set a078a27e78a252b8
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows NT/2000/XP (on /dev/sdb1)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 78684472684430e4
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, avec Linux 2.6.32-25-generic-pae (on /dev/sdb7)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-25-generic-pae (mode de récupération) (on /dev/sdb7)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-24-generic-pae (on /dev/sdb7)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-24-generic-pae (mode de récupération) (on /dev/sdb7)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
menuentry "Windows NT/2000/XP (on /dev/sdc1)" {
insmod ntfs
set root='(hd2,1)'
search --no-floppy --fs-uuid --set 8c5411af54119cd0
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic-pae (on /dev/sdc5)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-23-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic-pae
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic-pae (recovery mode) (on /dev/sdc5)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-23-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro single
initrd /boot/initrd.img-2.6.35-23-generic-pae
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
insmod ntfs
set root=(hd0,1)
drive map -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows XP origine" {
insmod ntfs
set root=(hd1,1)
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/42_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "GRUB externe hd3,1" {
set root=(hd3,1)
configfile /boot/grub/grub.cfg
}
### END /etc/grub.d/42_custom ###
=============================== sdb5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=8d6c97e8-8c26-430c-8353-2b35b82c73d1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=de7c7e33-a5b4-4bd4-be64-e1e59ae987a6 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb5: Location of files loaded by Grub: ===================
259.7GB: boot/grub/core.img
265.1GB: boot/grub/grub.cfg
255.0GB: boot/initrd.img-2.6.32-25-generic-pae
255.3GB: boot/vmlinuz-2.6.32-25-generic-pae
255.0GB: initrd.img
255.3GB: vmlinuz
=========================== sdb7/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="1"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=-1
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/09_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry ' DISQUE Sdb variables environnement '{
echo
echo
echo
echo
set
}
### END /etc/grub.d/09_custom ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic-pae (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
echo 'Chargement de Linux 2.6.32-25-generic-pae ...'
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic-pae (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
echo 'Chargement de Linux 2.6.32-24-generic-pae ...'
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set a078a27e78a252b8
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows NT/2000/XP (on /dev/sdb1)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 78684472684430e4
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic-pae (on /dev/sdb5)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 8d6c97e8-8c26-430c-8353-2b35b82c73d1
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=8d6c97e8-8c26-430c-8353-2b35b82c73d1 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Windows NT/2000/XP (on /dev/sdc1)" {
insmod ntfs
set root='(hd2,1)'
search --no-floppy --fs-uuid --set 8c5411af54119cd0
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic-pae (on /dev/sdc5)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-22-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic-pae
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic-pae (recovery mode) (on /dev/sdc5)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-22-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro single
initrd /boot/initrd.img-2.6.35-22-generic-pae
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic-pae (on /dev/sdh1)" {
insmod ext2
set root='(hd3,1)'
search --no-floppy --fs-uuid --set b1b55aa8-eee6-4932-9917-a90006b6e5dd
linux /boot/vmlinuz-2.6.35-22-generic-pae root=UUID=b1b55aa8-eee6-4932-9917-a90006b6e5dd ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic-pae
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic-pae (recovery mode) (on /dev/sdh1)" {
insmod ext2
set root='(hd3,1)'
search --no-floppy --fs-uuid --set b1b55aa8-eee6-4932-9917-a90006b6e5dd
linux /boot/vmlinuz-2.6.35-22-generic-pae root=UUID=b1b55aa8-eee6-4932-9917-a90006b6e5dd ro single
initrd /boot/initrd.img-2.6.35-22-generic-pae
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows XP Origine" {
insmod ntfs
set root='(hd1,1)'
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/42_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "GRUB externe hd3,1"{
set root='(hd3,1)'
configfile /boot/grub/grub.cfg
}
### END /etc/grub.d/42_custom ###
=============================== sdb7/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#
# / was on /dev/sda7 during installation .............. mais attention c'est maintenant sdb7
UUID=6c2442e5-3543-4bec-9f70-210ecf652610 / ext4 errors=remount-ro 0 1
#
# swap was on /dev/sda8 during installation .............. mais attention c'est maintenant sdb8
UUID=d32720eb-3bc9-4f30-877f-f939c9472be2 none swap sw 0 0
#
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
#
# met le home sur le disque Sdc2 (UUID=40a6 ...)
#UUID=40a68636-cbba-4d91-837a-88dbf8864023 /home ext4 defaults 0 2
# met le home sur la sauvegarde S_home 08_11_2010 10H00
#/dev/sda3: LABEL="S_home" UUID="09e9e7c8-a78a-4270-aee1-db55a446ecc3" TYPE="ext4"
#UUID=09e9e7c8-a78a-4270-aee1-db55a446ecc3 /home ext4 defaults 0 2
# met le home sur la sauvegarde N_home 08_11_2010 10H30
#/dev/sdb9: LABEL="N_home" UUID="b703721e-397f-49c4-a30e-8de5e623d55f" TYPE="ext4"
UUID=b703721e-397f-49c4-a30e-8de5e623d55f /home ext4 defaults 0 2
=================== sdb7: Location of files loaded by Grub: ===================
161.8GB: boot/grub/core.img
162.7GB: boot/grub/grub.cfg
163.6GB: boot/initrd.img-2.6.32-25-generic-pae
163.3GB: boot/vmlinuz-2.6.32-24-generic-pae
162.7GB: boot/vmlinuz-2.6.32-25-generic-pae
163.6GB: initrd.img
162.7GB: vmlinuz
163.3GB: vmlinuz.old
================================ sdc1/boot.ini: ================================
[boot loader]
timeout=1
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /noexecute=optin /fastdetect
=========================== sdc5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="${saved_entry}"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=60
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/09_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry ' DISQUE Sdc5 : les variables environnement de GRUB :'{
echo
echo
echo Voici les variables environnement de GRUB
echo
set
}
### END /etc/grub.d/09_custom ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-24-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro quiet splash
initrd /boot/initrd.img-2.6.35-24-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
echo 'Loading Linux 2.6.35-24-generic-pae ...'
linux /boot/vmlinuz-2.6.35-24-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-24-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux /boot/vmlinuz-2.6.35-23-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
echo 'Loading Linux 2.6.35-23-generic-pae ...'
linux /boot/vmlinuz-2.6.35-23-generic-pae root=UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-23-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd2,msdos5)'
search --no-floppy --fs-uuid --set 209f6a9c-4342-4780-89ae-4fa14d0c3365
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (on /dev/sda1)" {
savedefault
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set a078a27e78a252b8
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows NT/2000/XP (on /dev/sdb1)" {
savedefault
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 78684472684430e4
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic-pae (on /dev/sdb5)" {
savedefault
insmod part_msdos
insmod ext2
set root='(hd1,msdos5)'
search --no-floppy --fs-uuid --set 8d6c97e8-8c26-430c-8353-2b35b82c73d1
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=8d6c97e8-8c26-430c-8353-2b35b82c73d1 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-25-generic-pae (on /dev/sdb7)" {
savedefault
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-25-generic-pae (mode de récupération) (on /dev/sdb7)" {
savedefault
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-25-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
initrd /boot/initrd.img-2.6.32-25-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-24-generic-pae (on /dev/sdb7)" {
savedefault
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
menuentry "Ubuntu, avec Linux 2.6.32-24-generic-pae (mode de récupération) (on /dev/sdb7)" {
savedefault
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set 6c2442e5-3543-4bec-9f70-210ecf652610
linux /boot/vmlinuz-2.6.32-24-generic-pae root=UUID=6c2442e5-3543-4bec-9f70-210ecf652610 ro single
initrd /boot/initrd.img-2.6.32-24-generic-pae
}
menuentry "Windows NT/2000/XP (on /dev/sdc1)" {
savedefault
insmod part_msdos
insmod ntfs
set root='(hd2,msdos1)'
search --no-floppy --fs-uuid --set 8c5411af54119cd0
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sdc5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=209f6a9c-4342-4780-89ae-4fa14d0c3365 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=9621a614-a277-437c-9a73-1a066b4587c3 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
# met le home sur la sauvegarde S_home 09_11_2010
#/dev/sda3: LABEL="S_home" UUID="09e9e7c8-a78a-4270-aee1-db55a446ecc3" TYPE="ext4"
#UUID=09e9e7c8-a78a-4270-aee1-db55a446ecc3 /home ext4 defaults 0 2
# met le home sur N_home 09_11_2010 08h20
#/dev/sdb9: LABEL="N_home" UUID="b703721e-397f-49c4-a30e-8de5e623d55f" TYPE="ext4"
UUID=b703721e-397f-49c4-a30e-8de5e623d55f /home ext4 defaults 0 2
=================== sdc5: Location of files loaded by Grub: ===================
462.0GB: boot/grub/core.img
455.7GB: boot/grub/grub.cfg
439.7GB: boot/initrd.img-2.6.35-23-generic-pae
454.0GB: boot/initrd.img-2.6.35-24-generic-pae
462.3GB: boot/vmlinuz-2.6.35-23-generic-pae
462.4GB: boot/vmlinuz-2.6.35-24-generic-pae
454.0GB: initrd.img
439.7GB: initrd.img.old
462.4GB: vmlinuz
462.3GB: vmlinuz.old
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdb2
00000000 50 0b b8 0d e8 a3 1f a5 9a 68 47 a8 ef 68 16 c0 |P........hG..h..|
00000010 4b ef 45 e7 20 8b e0 93 9c a1 ec 4c 51 a6 80 2b |K.E. ......LQ..+|
00000020 1f 2b 69 a8 fa 21 ef a4 19 a4 ea 96 a2 54 cf 4b |.+i..!.......T.K|
00000030 69 a8 b6 6a ae ab da a9 17 28 79 ca 7c 65 a1 e2 |i..j.....(y.|e..|
00000040 2f d5 47 65 3f cd 73 f5 2a ed 84 94 3a a9 b7 b4 |/.Ge?.s.*...:...|
00000050 b7 d2 8a 53 7f 65 fc ce 50 67 3b b3 2f e7 04 6a |...S.e..Pg;./..j|
00000060 a5 d5 6a 90 9b 9f 63 cf d9 9b 35 3c bb 7d 26 94 |..j...c...5<.}&.|
00000070 35 37 e3 47 86 23 fd 44 fa b4 f4 85 69 b2 f4 33 |57.G.#.D....i..3|
00000080 a9 dc f4 b4 d4 fb 69 4d 74 33 53 15 29 f3 b5 63 |......iMt3S.)..c|
00000090 54 25 ea 62 39 5f f9 52 3a 5d 56 23 9e 28 9e 24 |T%.b9_.R:]V#.(.$|
000000a0 9c 22 98 c2 7b c0 cd 63 73 d9 19 c8 69 e4 3c 84 |."..{..cs...i.<.|
000000b0 33 be d2 b2 18 c7 c0 fd d0 55 60 2a d4 1f 68 0a |3........U`*..h.|
000000c0 e5 01 dd e8 a3 a9 31 40 40 e6 90 eb b0 b7 f1 8a |......1@@.......|
000000d0 08 1a be 15 14 05 19 81 a8 df e3 5d e6 3b e4 a1 |...........].;..|
000000e0 79 9f b9 39 9e 81 ee 07 ee e5 6e 99 27 df 63 f2 |y..9......n.'.c.|
000000f0 d0 bd c3 bc 7f 79 8b 3d 3b 3c 43 dc 7e 57 6b e7 |.....y.=;<C.~Wk.|
00000100 02 47 57 9b c8 fa cb 34 d6 b8 47 3f ad a6 4b f5 |.GW....4..G?..K.|
00000110 a5 2a 49 55 c3 aa cc aa 58 95 a9 6a 4e 4d b0 ba |.*IU....X..jNM..|
00000120 95 21 4f 5f 61 ac d4 5b 4c 9d 93 1e d8 dc b0 cf |.!O_a..[L.......|
00000130 c4 30 7c 31 ce 32 fc 30 5e 34 9e 37 1d 37 cb 2c |.0|1.2.0^4.7.7.,|
00000140 7f 59 ef 5b bf d9 e6 db 97 3a d8 2e d2 b5 cd 3b |.Y.[.....:.....;|
00000150 c6 b7 19 ed 8e de 09 37 0e 4d 8b 5a 43 ee a8 31 |.......7.M.ZC..1|
00000160 c4 89 cd 0d 57 c6 ba 45 2b b1 68 fc 12 f1 0e 1f |....W..E+.h.....|
00000170 45 c5 c9 13 60 1d 20 07 12 d1 4f 23 8d e0 f9 1c |E...`. ...O#....|
00000180 84 65 e0 6f e4 2c 11 15 f1 30 f1 09 c1 12 c9 20 |.e.o.,...0..... |
00000190 e1 39 f1 54 e1 6c d1 6a 21 4d 34 5c 54 28 fa 2a |.9.T.l.j!M4\T(.*|
000001a0 3e 2e de 28 ed 28 bd 23 9f 2d 7f a4 d4 a8 02 6a |>..(.(.#.-.....j|
000001b0 4e 8a 52 7b 41 87 ea 0e a4 51 d3 34 e9 75 00 fe |N.R{A....Q.4.u..|
000001c0 ff ff 83 fe ff ff 73 f9 c7 0d fb f8 ac 0e 00 fe |......s.........|
000001d0 ff ff 05 fe ff ff db 69 94 29 68 82 14 01 00 00 |.......i.)h.....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=======Devices which don't seem to have a corresponding hard drive==============
sdd sde sdf sdg
PC : B760M DS3H DDR4, 12th Gen Intel(R) Core(TM) i3-12100, RAM DDR4 8GiB -2400 Ubuntu 22.04, 22.04, 23.04
Portable1 : Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz RAM 4GiB DDR2 667 MHz Ubuntu 23.04 ( en voyage )
Portable2 : T5750 @ 2.00GHz RAM 1GiB DDR2 667 Mhz Ubuntu 20.04 ( batterie HS )
stourm a ran war bep tachenn (Angela Duval) ( Je combats sur tous les fronts )
Hors ligne
#16 Le 08/01/2011, à 13:18
- pseudologos
Re : grub 2
Merci cep pour tes explications...
Si j'ai bien compris, je sais désormais où se trouve grub. Mon problème est maintenant de comprendre pourquoi je n'ai pas droits sur sda1 que j'ai formater en ext4. Cette partition était en nfts, mais pour sauvegarder /home il faut ext4. donc...
j'insiste un peu pardonnez-moi : j'explique cela ici
Hors ligne
#17 Le 08/01/2011, à 13:22
- chopinhauer
Re : grub 2
ok merci. Ta modif du script corrige le problème en créant le fichier.
Deux points m'intriguent encore : a quoi servent "2>/dev/null" et ">/dev/null" ?
Enlever un peu de sortie non intéressante des commandes. De grep m'intéresse uniquement le code de sortie et dd affiche des statistiques sur la sortie d'erreur que je ne veux pas voir.
interessant le script, mais l'interêt de device.map étant maintenant moindre puisque non créé automatiquement, il y a une solution plus simple, voir la configuration du paquet grub avec debconf-show grub-pc
J'utilise device.map pour chercher uniquement sur des disques qui pourraient avoir une incidence lors du démarrage. On peut très bien faire une recherche sur tous les disques (même si volumes LVM et certains composants RAID ne peuvent pas être utilisés par Grub.
Ton approche est un peu orthogonale à ce que je fais dans mon script : il donne l'endroit où Grub est configuré pour s'installer, pas l'endroit où il est vraiment installé.
Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.
Hors ligne
#18 Le 08/01/2011, à 13:41
- cep
Re : grub 2
Ton approche est un peu orthogonale à ce que je fais dans mon script : il donne l'endroit où Grub est configuré pour s'installer, pas l'endroit où il est vraiment installé.
C'est vrai, mais dans 99,9% des cas c'est là qu'il est installé et, surtout, qu'il sera installé lors des mises à jour. Donc on ne peut faire l'impasse sur ce point.
Aussi il peut arriver que le device.map soit erroné. Donc je me répète, le script est très intéressant mais il ne faut pas faire l'impasse sur le contrôle de la configuration de grub-pc, d'où l'intérêt de debconf-show grub-pc
Enfin je préfère et de loin l'usage de od à dd et hexdump est-t'il installé systématiquement ?
Hors ligne
#19 Le 08/01/2011, à 13:50
- chopinhauer
Re : grub 2
Enfin je préfère et de loin l'usage de od à dd et hexdump est-t'il installé systématiquement ?
Oui, les deux y sont, même si apparemment seul od est nécessaire pour la compatibilité POSIX.
Aucun des deux n'est pas utilisé dans le script.
Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.
Hors ligne
#20 Le 08/01/2011, à 13:57
- pseudologos
Re : grub 2
Pour moi, ar barzh paour, c'est plus court
ludovic@ludovic-desktop:~$ sudo bash /home/ludovic/Bureau/boot_info_script055.shIdentifying MBRs...
Computing Partition Table of /dev/sda...
Computing Partition Table of /dev/sdb...
Computing Partition Table of /dev/sdc...
Computing Partition Table of /dev/sdd...
Searching sda1 for information...
Searching sda2 for information...
Searching sdb1 for information...
Searching sdb2 for information...
Searching sdb5 for information...
Searching sdc1 for information...
Searching sdd1 for information...
Finished. The results are in the file RESULTS.txt located in /home/ludovic/Bureau
Hors ligne
#21 Le 08/01/2011, à 14:02
- cep
Re : grub 2
cep a écrit :Enfin je préfère et de loin l'usage de od à dd et hexdump est-t'il installé systématiquement ?
Oui, les deux y sont, même si apparemment seul od est nécessaire pour la compatibilité POSIX.
Aucun des deux n'est pas utilisé dans le script.
je parlais de dd.
od à utiliser en général et od en remplacement de hexdump car sur debian je vois que pour hexdump le paquet bsdmainutils n'est pas installé automatiquement.
@pseudologos : pour ton problème sur l'autre poste voir à se donner les droits d'écriture sur le point de montage. Le tout est expliqué dans les pages de la documentation.
Hors ligne
#22 Le 08/01/2011, à 14:08
- pseudologos
Re : grub 2
Merci cep,
si tu avais un lien concernant les droits d'écriture sur les points de montage, cela m'aiderait, car je ne vois pas...
merci
Hors ligne
#23 Le 08/01/2011, à 14:21
- pseudologos
Re : grub 2
Au fait voila ce que donne le script chez moi
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sdd
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdd1: _________________________________________________________________________
File system: vfat
Boot sector type: Fat32
Boot sector info: According to the info in the boot sector, sdd1 starts
at sector 0. But according to the info from fdisk,
sdd1 starts at sector 63.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disque /dev/sda: 82.0 Go, 81964302336 octets
255 têtes, 63 secteurs/piste, 9964 cylindres, total 160086528 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 154,834,469 154,834,407 83 Linux
/dev/sda2 * 154,834,470 160,071,659 5,237,190 5 Extended
Empty Partition
Drive: sdb ___________________ _____________________________________________________
Disque /dev/sdb: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 300,550,143 300,548,096 83 Linux
/dev/sdb2 300,552,190 312,580,095 12,027,906 5 Extended
/dev/sdb5 300,552,192 312,580,095 12,027,904 82 Linux swap / Solaris
Drive: sdc ___________________ _____________________________________________________
Disque /dev/sdc: 320.1 Go, 320072933376 octets
255 têtes, 63 secteurs/piste, 38913 cylindres, total 625142448 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 63 625,137,344 625,137,282 7 HPFS/NTFS
Drive: sdd ___________________ _____________________________________________________
Disque /dev/sdd: 2133 Mo, 2133065728 octets
255 têtes, 63 secteurs/piste, 259 cylindres, total 4166144 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 63 4,160,834 4,160,772 b W95 FAT32
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 1dbed1cf-c7c8-4d23-9150-439a23e3b6c5 ext4 archives
/dev/sda2: PTTYPE="dos"
/dev/sda: PTTYPE="dos"
/dev/sdb1 a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ext4
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 614e938f-2a86-4bd9-af02-f1b659c978d0 swap
/dev/sdb: PTTYPE="dos"
/dev/sdc1 20580A4B580A2060 ntfs Iomega HDD
/dev/sdc: PTTYPE="dos"
/dev/sdd1 6021-1DAE vfat ubuntu 10.4
/dev/sdd: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdb1 / ext4 (rw,errors=remount-ro)
/dev/sdc1 /media/Iomega HDD fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda1 /media/archives ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdd1 /media/ubuntu 10.4 vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro quiet splash
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-27-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
echo 'Chargement de Linux 2.6.32-27-generic ...'
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro quiet splash
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-26-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
echo 'Chargement de Linux 2.6.32-26-generic ...'
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
echo 'Chargement de Linux 2.6.32-25-generic ...'
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
echo 'Chargement de Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a89672b3-b180-41d1-bac1-f5f38e6c0ec2
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=a89672b3-b180-41d1-bac1-f5f38e6c0ec2 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=614e938f-2a86-4bd9-af02-f1b659c978d0 none swap sw 0 0
=================== sdb1: Location of files loaded by Grub: ===================
133.2GB: boot/grub/core.img
48.4GB: boot/grub/grub.cfg
133.5GB: boot/initrd.img-2.6.32-24-generic
133.5GB: boot/initrd.img-2.6.32-25-generic
133.6GB: boot/initrd.img-2.6.32-26-generic
133.6GB: boot/initrd.img-2.6.32-27-generic
133.4GB: boot/vmlinuz-2.6.32-24-generic
133.5GB: boot/vmlinuz-2.6.32-25-generic
133.5GB: boot/vmlinuz-2.6.32-26-generic
133.6GB: boot/vmlinuz-2.6.32-27-generic
133.6GB: initrd.img
133.6GB: initrd.img.old
133.6GB: vmlinuz
133.5GB: vmlinuz.old
Hors ligne
#24 Le 08/01/2011, à 14:28
- Compte anonymisé
Re : grub 2
Hé bien tu y arrives
Par contre ceci est un peu bizarre :
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sddsda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
Grub est installé sur /dev/sda mais pointe sur /dev/sda1 qui ne contient pas de fichiers de boot ??????
A mon avis /dev/sda n'est pas le device de boot, sinon ça ne fonctionnerai pas.
@+
#25 Le 08/01/2011, à 14:57
- cep
Re : grub 2
Merci cep,
si tu avais un lien concernant les droits d'écriture sur les points de montage, cela m'aiderait, car je ne vois pas...
merci
tu peux regarder par exemple ici :
http://doc.ubuntu-fr.org//mount_fstab?redirect=1
http://doc.ubuntu-fr.org/mount_fstab?s[]=fstab
http://doc.ubuntu-fr.org/permissions?s[]=chown
En gros, tu crées ton point de montage :
sudo mkdir /media/point_montage
puis tu donnes à ton user les droits sur ce point de montage :
sudo chown ton_user:ton_user /media/point_montage
et tu montes le système de fichiers ou le configure dans /etc/fstab.
Si tu fais le chown après le mount il faudra y ajouter l'option -R pour récursif.
sudo chown -R ton_user:ton_user /media/point_montage
Voir le man chown.
Pour clore ton poste sur la question initiale, tu as avec le script de chopinauer et la commande debconf l'ensemble suffisant pour gérer ce point. Le reste est bavardage inutile mais inévitable avec l'autre . . . .
Bonne continuation.
cep
Hors ligne