Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 31/03/2017, à 21:27

Niicootine

[RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour à tous,

Pour les cours, j'ai récemment décidé d'acheter un ordinateur portable et j'ai opté pour l'Acer Swift 3 SF314-51-39ZJ Argent.
Egalement pour les cours, j'ai également besoin d'y installer Ubuntu en dual-boot avec Windows (10).

Voila la description de mon problème :
Je lance Ubuntu depuis un Live USB (pas de lecteur CD/DVD) et lui demande de s'installer sur une partition non allouée créée auparavant sur Windows.
Il formate cette même partition pour supporter le système de fichier d'Ubuntu. Il installe ensuite Ubuntu et grub avec succès, enfin ... je n'ai pas de message d'erreur du moins. Il me demande de redémarrer l'ordinateur pour finaliser l'installation, et là le drame arrive.
L'ordinateur est incapable de booter sur cette nouvelle partition. Il ne l'affiche même pas dans le boot menu. Elle reste cependant visible sur l'utilitaire de disques Windows et indique avoir ~4Go de place occupée.

J'ai fouillé un peu avant de poster, et je sais que plusieurs personnes ont eu du mal à installer Ubuntu sur leur Swift. Mais ces personnes là pouvaient tout de même booter sur la partition désirée.

Voici les informations complémentaires que j'ai à vous donner :
Dans la BIOS (UEFI pour mon cas), Secure Boot est bien désactivé.
J'ai essayé d'installer les versions suivantes d'Ubuntu, sans succès :
    16.04 amd64
    16.10 i386
    16.10 64 bits
    14.04 (pour wubi)
La clé USB utilisée dispose de 8Go, utilise USB 3.0, et est configurée par Rufus (GPT pour UEFI)

Je ne sais plus quoi faire et j'ai désespérément besoin de votre aide et vous en remercie d'avance,
Cordialement

Dernière modification par Niicootine (Le 01/04/2017, à 19:41)

Hors ligne

#2 Le 31/03/2017, à 21:47

Laurent85

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour, matériel Acer vois ce lien, il y a une procédure à suivre pour valider Ubuntu dans les paramètres du pc https://forum.ubuntu-fr.org/viewtopic.p … #p21468818

Dernière modification par Laurent85 (Le 31/03/2017, à 21:48)

Hors ligne

#3 Le 31/03/2017, à 22:09

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Salut merci infiniment ! L'ordinateur boot maintenant sur la partition voulue ! Seulement, un écran noir arrive juste après ... hmm

Hors ligne

#4 Le 31/03/2017, à 22:11

Laurent85

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Quelle version ? La 16.04.2 ?

Hors ligne

#5 Le 31/03/2017, à 22:13

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Non, la version 16.10 64 bits
[EDIT] : 16.10 amd64

Dernière modification par Niicootine (Le 31/03/2017, à 22:18)

Hors ligne

#6 Le 31/03/2017, à 22:27

Laurent85

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Et ça boot normalement en live session sur la clé usb ?

Ouvre un terminal en session live et génère un rapport bisnext. Copie-colle les commandes suivantes une par une dans le terminal, exécute la commande puis commande suivante, etc...

setxkbmap fr
wget https://github.com/laurent85v/bisnext/raw/master/bisnext
sudo bash bisnext
sudo apt update
sudo apt install gawk mesa-utils pastebinit smartmontools --no-install-recommends
sudo bash bisnext --pastebin

Donne le lien indiqué en première ligne du rapport, il est aussi affiché dans le terminal.

Dernière modification par Laurent85 (Le 31/03/2017, à 22:30)

Hors ligne

#7 Le 01/04/2017, à 02:20

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Oui il boot très bien sur la clé USB.
J'ai donc entré les lignes et voila le résultat :

http://paste.openstack.org/show/605117/

Bonne soirée (ou journée) !

Hors ligne

#8 Le 01/04/2017, à 09:13

malbo

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour,
Ton modèle Acer Swift 3 SF314-51-39ZJ est bien décrit sur cette page.
Je colle ci-dessous ton rapport ( http://paste.openstack.org/show/605117/ ) au cas où il viendrait à disparaître du site qui l'héberge :

============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    2048 of the same hard drive for core.img, but core.img can not be found at 
    this location.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Boot/bootx64.efi /efi/ubuntu/fwupx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/MokManager.efi 
                       /efi/ubuntu/shimx64.efi 
                       /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda4: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /efi/BOOT/grubx64.efi

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   250,069,679   250,069,679  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   209,106,943   208,056,320 Data partition (Windows/Linux)
/dev/sda3           209,106,944   241,956,863    32,849,920 Data partition (Linux)
/dev/sda4           241,956,864   250,068,991     8,112,128 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.4 GiB, 7918845952 bytes, 15466496 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 4,294,967,295 4,294,967,295  ee GPT

/dev/sdb1 ends after the last sector of /dev/sdb

GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048    15,466,462    15,464,415 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        42A8-8FCE                              vfat       
/dev/sda2        5AA9703A5DB606DB                       ntfs       
/dev/sda3        8d5528c9-5cde-4a12-b573-42444c635260   ext4       
/dev/sda4        006a168f-88e1-427b-92c2-3d99bb385a5c   swap       
/dev/sdb1        D096-AA12                              vfat       UBUNTU 16_1

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr  1 00:00 ata-HFS128G39TND-N210A_FS6CN56091090CH0N -> ../../sda
lrwxrwxrwx 1 root root 10 Apr  1 00:00 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr  1 00:00 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr  1 00:00 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr  1 00:00 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part4 -> ../../sda4
lrwxrwxrwx 1 root root  9 Apr  1 00:00 usb-_USB_DISK_3.0_070157A04E279C43-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr  1 00:00 usb-_USB_DISK_3.0_070157A04E279C43-0:0-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8d5528c9-5cde-4a12-b573-42444c635260
else
  search --no-floppy --fs-uuid --set=root 8d5528c9-5cde-4a12-b573-42444c635260
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8d5528c9-5cde-4a12-b573-42444c635260' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8d5528c9-5cde-4a12-b573-42444c635260
	else
	  search --no-floppy --fs-uuid --set=root 8d5528c9-5cde-4a12-b573-42444c635260
	fi
	linux	/boot/vmlinuz-4.8.0-22-generic.efi.signed root=UUID=8d5528c9-5cde-4a12-b573-42444c635260 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-22-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-42A8-8FCE' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  42A8-8FCE
	else
	  search --no-floppy --fs-uuid --set=root 42A8-8FCE
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=8d5528c9-5cde-4a12-b573-42444c635260 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=42A8-8FCE  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda4 during installation
UUID=006a168f-88e1-427b-92c2-3d99bb385a5c none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 110.124656677 = 118.245449728  boot/grub/grub.cfg                             1
 100.896610260 = 108.336910336  boot/vmlinuz-4.8.0-22-generic                  1
 102.808536530 = 110.389825536  boot/vmlinuz-4.8.0-22-generic.efi.signed       1
 100.896610260 = 108.336910336  vmlinuz                                        1
 110.467037201 = 118.613078016  boot/initrd.img-4.8.0-22-generic               3
 110.467037201 = 118.613078016  initrd.img                                     3

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1

==================================== inxi report: ==============================

System:    Kernel: 4.8.0-22-generic x86_64 (64 bit gcc: 6.2.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.10
Machine:   Device: laptop System: Acer product: Swift SF314-51 v: V1.07
           Mobo: Acer model: M3_SK v: V1.07
           UEFI: Insyde v: V1.07 date: 11/24/2016
           Chassis: type: 10
Battery    BAT0: charge: 8.2 Wh 25.7% condition: 31.9/32.2 Wh (99%)
           volts: 14.8/15.2
           model: OEM AC14B8K status: Discharging
CPU:       Dual core Intel Core i3-6006U (-HT-MCP-) cache: 3072 KB bmips: 7968 
           clock speeds: min/max: 400/2000 MHz 1: 400 MHz 2: 456 MHz
           3: 1281 MHz 4: 450 MHz
           CPU Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
           arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov
           constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts eagerfpu epb ept
           erms est f16c flexpriority fma fpu fsgsbase fxsr ht hwp
           hwp_act_window hwp_epp hwp_notify intel_pt invpcid lahf_lm lm mca
           mce mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
           pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts
           rdrand rdseed rdtscp rep_good sdbg sep smap smep ss sse sse2 sse4_1
           sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust
           tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec
           xsaveopt xsaves xtopology xtpr
Memory:    Array-1 capacity: 4 GB devices: 2 EC: None
           Device-1: ChannelA-DIMM0 size: 2 GB speed: 2133 MHz type: DDR4
           manufacturer: SK Hynix part: HMA425S6AFR6N-TF
           Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
           Device-3: ChannelB-DIMM0 size: 2 GB speed: 2133 MHz type: DDR4
           manufacturer: SK Hynix part: HMA425S6AFR6N-TF
           Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
           Device-5: N/A size: N/A type: N/A
           Device-6: N/A size: N/A type: N/A
           Device-7: N/A size: N/A type: N/A
Graphics:  Card: Intel HD Graphics 520 bus-ID: 00:02.0 chip-ID: 8086:1916
           Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 1366x768@60.06hz
           GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
           GLX Version: 3.0 Mesa 12.0.3 Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-LP HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:9d70
           Sound: Advanced Linux Sound Architecture v: k4.8.0-22-generic
Network:   Card: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
           driver: ath10k_pci bus-ID: 02:00.0 chip-ID: 168c:003e
           IF: wlp2s0 state: up mac: <filter>
Drives:    HDD Total Size: 136.0GB (4.1% used)
           ID-1: /dev/sda model: HFS128G39TND size: 128.0GB
          
           ID-2: USB /dev/sdb model: USB_DISK_3.0 size: 7.9GB
          
           Optical: No optical drives detected.
Partition: ID-1: /cdrom size: 7.4G used: 1.5G (21%) fs: vfat dev: /dev/sdb1
           label: UBUNTU 16_1 uuid: D096-AA12
           ID-2: swap-1 size: 4.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
           label: N/A uuid: 006a168f-88e1-427b-92c2-3d99bb385a5c
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
           ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
           ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
           ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
           ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
           ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
           ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
           ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
           ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
           ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
           ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
           ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
           ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
           ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
           ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
           ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
           ID-17: /dev/sda1 size: 0.54G
           fs: FAT (32 bit) label: N/A uuid: 42A8-8FCE
           ID-18: /dev/sda2 size: 106.52G
           fs: NTFS label: N/A uuid: 5AA9703A5DB606DB
           ID-19: /dev/sda3 size: 16.82G
           fs: ext4 label: N/A uuid: 8d5528c9-5cde-4a12-b573-42444c635260
Sensors:   None detected - is lm-sensors installed and configured?
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb cdrom:[Ubuntu 16.10 _Yakkety Yak_ - Release amd64 (20161012.2)]/ yakkety main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu/ yakkety main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu/ yakkety-security main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu/ yakkety-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 4.9% command: firefox pid: 3168 mem: 297.80MB (7.8%)
           2: cpu: 2.6% command: bash pid: 8086 mem: 4.53MB (0.1%)
           3: cpu: 2.5% command: plugin-container pid: 3241 mem: 177.38MB (4.6%)
           4: cpu: 2.3% command: compiz pid: 2333 mem: 145.19MB (3.8%)
           5: cpu: 1.8% command: Xorg pid: 1644 mem: 57.65MB (1.5%)
           6: cpu: 0.9% command: init pid: 1 mem: 7.31MB (0.1%)
           7: cpu: 0.6% command: bisnext.txt (started by: gedit) pid: 6865 mem: 44.45MB (1.1%)
           8: cpu: 0.5% command: nm-applet pid: 2484 mem: 53.76MB (1.4%)
           9: cpu: 0.4% command: gnome-terminal-server pid: 3348 mem: 34.66MB (0.9%)
           10: cpu: 0.4% command: upstart pid: 1784 mem: 4.88MB (0.1%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 297.80MB (7.8%) command: firefox pid: 3168 cpu: 4.9%
           2: mem: 177.38MB (4.6%) command: plugin-container pid: 3241 cpu: 2.5%
           3: mem: 145.19MB (3.8%) command: compiz pid: 2333 cpu: 2.3%
           4: mem: 57.65MB (1.5%) command: Xorg pid: 1644 cpu: 1.8%
           5: mem: 53.76MB (1.4%) command: nm-applet pid: 2484 cpu: 0.5%
           6: mem: 45.15MB (1.1%) command: nautilus pid: 2482 cpu: 0.2%
           7: mem: 44.45MB (1.1%) command: bisnext.txt (started by: gedit) pid: 6865 cpu: 0.6%
           8: mem: 34.75MB (0.9%) command: unity-panel-service pid: 2352 cpu: 0.1%
           9: mem: 34.66MB (0.9%) command: gnome-terminal-server pid: 3348 cpu: 0.4%
           10: mem: 32.98MB (0.8%) command: evolution-calendar-factory pid: 2453 cpu: 0.0%
Info:      Processes: 498 Uptime: 13 min Memory: 1021.1/3815.6MB
           Init: systemd v: 231 runlevel: 5 default: 2 Gcc sys: 6.2.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


=================================== rfkill: ===================================

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: acer-wireless: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: acer-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
3: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no


=================================== lsusb: ====================================

Bus 002 Device 002: ID 13fe:5500 Kingston Technology Company Inc. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 04f2:b573 Chicony Electronics Co., Ltd 
Bus 001 Device 003: ID 1c7a:0570 LighTuning Technology Inc. 
Bus 001 Device 002: ID 04ca:3016 Lite-On Technology Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 5: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M


=================================== cmdline: ==================================

BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---


==================================== dmesg: ===================================

[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x8a500000  SMBIOS 3.0=0x8a4fe000  ESRT=0x8a501d18  ACPI 2.0=0x8aefe014 
[    0.000000] ACPI: UEFI 0x000000008AEFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000008AEFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.205001] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.239234] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    6.735198] efifb: probing for efifb
[    6.735211] efifb: framebuffer at 0xa0000000, using 4128k, total 4128k
[    6.735212] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    6.735213] efifb: scrolling: redraw
[    6.735214] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    6.740087] fb0: EFI VGA frame buffer device
[    6.793359] EFI Variables Facility v0.08 2004-May-17
[    6.843490] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[    6.843511] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[    6.843524] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.builtin_trusted_keys'
[    6.846137] EFI: Loaded cert 'PEGA-SW2: c193b1dcae4e608d49553a362a14ac17' linked to '.builtin_trusted_keys'
[    6.847085] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[    6.848645] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
[    6.997943] fb: switching to inteldrmfb from EFI VGA
[    7.020079] [drm] GuC firmware load skipped
[    8.635906] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x4d5f03)
[   17.309198] tpm_crb: probe of MSFT0101:00 failed with error -16
[   18.209691] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[   18.209718] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[   18.209831] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[   18.209833] ath10k_pci 0000:02:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[   18.310616] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5


============================= boot-up statistics: =============================

Startup finished in 8.535s (firmware) + 3.260s (loader) + 16.783s (kernel) + 2.737s (userspace) = 31.317s


blame, first 10:
click-system-hooks.service  1.850s
networking.service          1.148s
user@999.service            1.100s
snapd.firstboot.service     1.073s
ModemManager.service        979ms
dev-loop0.device            977ms
dev-sdb1.device             971ms
NetworkManager.service      633ms
grub-common.service         566ms
irqbalance.service          565ms


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @2.724s
  2 multi-user.target @2.707s
  3 click-system-hooks.service @856ms +1.850s
  4 basic.target @789ms
  5 sockets.target @789ms
  6 snapd.socket @765ms +2ms
  7 sysinit.target @761ms
  8 systemd-timesyncd.service @616ms +133ms
  9 systemd-tmpfiles-setup.service @602ms +12ms
 10 local-fs.target @592ms
 11 tmp.mount @588ms +4ms
 12 local-fs-pre.target @572ms
 13 lvm2-monitor.service @267ms +304ms
 14 lvm2-lvmetad.service @384ms
 15 system.slice @228ms
 16 -.slice @225ms


================================== locales: ===================================

locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=

/etc/default/locale:
LANG="en_US.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"


====================================== Modules: ================================

Module                  Size  Used by
ablk_helper            16384  1 aesni_intel
ac97_bus               16384  1 snd_soc_core
acer_wmi               20480  0
acpi_pad               20480  0
aesni_intel           167936  4
aes_x86_64             20480  1 aesni_intel
ahci                   36864  1
arc4                   16384  2
ath10k_core           335872  1 ath10k_pci
ath10k_pci             45056  0
ath                    32768  1 ath10k_core
aufs                  233472  6174
autofs4                40960  2
bluetooth             552960  33 btrtl,hci_uart,btintel,btqca,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  2 hci_uart,btusb
btintel                16384  2 hci_uart,btusb
btqca                  16384  1 hci_uart
btrtl                  16384  1 btusb
btusb                  45056  0
ccm                    20480  1
cfg80211              581632  3 mac80211,ath,ath10k_core
cmac                   16384  1
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
dm_log                 20480  2 dm_mirror,dm_region_hash
dm_mirror              24576  0
dm_region_hash         24576  1 dm_mirror
drm                   368640  6 i915,drm_kms_helper
drm_kms_helper        167936  1 i915
fb_sys_fops            16384  1 drm_kms_helper
fjes                   28672  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               94208  0
hid                   118784  2 i2c_hid,hid_multitouch
hid_multitouch         20480  0
i2c_algo_bit           16384  1 i915
i2c_designware_core    20480  1 i2c_designware_platform
i2c_designware_platform    16384  0
i2c_hid                20480  0
i915                 1314816  94
idma64                 20480  0
input_leds             16384  0
intel_cstate           16384  0
intel_lpss             16384  2 intel_lpss_pci,intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_lpss_pci         16384  0
intel_pch_thermal      16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
ip_tables              28672  0
irqbypass              16384  1 kvm
joydev                 20480  0
kvm                   598016  1 kvm_intel
kvm_intel             188416  0
libahci                32768  1 ahci
lp                     20480  0
lrw                    16384  1 aesni_intel
mac80211              757760  1 ath10k_core
mac_hid                16384  0
media                  40960  2 uvcvideo,videodev
mei                   102400  1 mei_me
mei_me                 40960  0
memstick               20480  1 rtsx_usb_ms
nls_iso8859_1          16384  1
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               131072  0
rfcomm                 77824  2
rtsx_usb               24576  2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms            20480  0
rtsx_usb_sdmmc         28672  0
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  19 snd_compress,snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress           20480  1 snd_soc_core
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core       28672  1 snd_soc_skl
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_soc_core          233472  1 snd_soc_skl
snd_soc_skl            65536  0
snd_soc_skl_ipc        45056  1 snd_soc_skl
snd_soc_sst_dsp        32768  1 snd_soc_skl_ipc
snd_soc_sst_ipc        16384  1 snd_soc_skl_ipc
snd_soc_sst_match      16384  1 snd_soc_skl
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 acer_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tpm_crb                16384  0
uas                    24576  0
ucsi                   16384  0
usb_storage            73728  2 uas
uvcvideo               90112  0
video                  40960  2 acer_wmi,i915
videobuf2_core         40960  2 uvcvideo,videobuf2_v4l2
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_vmalloc      16384  1 uvcvideo
videodev              180224  3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma               16384  1 idma64
wmi                    16384  1 acer_wmi
x86_pkg_temp_thermal    16384  0
x_tables               36864  1 ip_tables


==================================== xorg: ===================================

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ ELAN0501:00 04F3:3037 Touchpad          	id=11	[slave  pointer  (2)]
⎜   ↳ ETPS/2 Elantech Touchpad                	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Video Bus                               	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ HD WebCam                               	id=10	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
    ↳ Acer WMI hotkeys                        	id=14	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
   1366x768      60.06*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)


============================== Additional drivers: =============================

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free



============================= Upgradable packages: =============================

Live Session


================================ Broken packages: ==============================

Live Session


======================== Package configuration pending: ========================

None


========================== Package install interrupted: ========================

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 319 not upgraded.


========================= UEFI Boot Manager settings: ==========================

BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0001,0002,0000,2001,2002,2003
Boot0000* Ubuntu	PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)/HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)A01 ..
Boot0001* Windows Boot Manager	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...8................
Boot0002* Linux	HD(1,GPT,326b48c9-7acb-4652-b687-b03048495539,0x800,0xebf7df)/File(\EFI\Boot\grubx64.efi)RC
Boot0003* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC


================================== Secure Boot: ================================

Secure Boot active


============================= md5sum of efi files: =============================

EFI files in /dev/sda1:
18a3724224b0f82a36941982259339b6  /EFI/Microsoft/Boot/bootmgfw.efi
4e3a2ee37111132b1bb95323dfc123d2  /EFI/Microsoft/Boot/bootmgr.efi
7cca888cd018f2fcf3be6383f7073d1e  /EFI/Microsoft/Boot/memtest.efi
18a3724224b0f82a36941982259339b6  /EFI/Boot/bootx64.efi
d73bbea8b6c047d2a706472f87d3ccdb  /EFI/ubuntu/fwupx64.efi
8a4ed1344c20b0d4788f54e2cc99e763  /EFI/ubuntu/grubx64.efi
ded965934506efb38a6dcb9ac5b2b79e  /EFI/ubuntu/shimx64.efi
ba8a7979ac57f1c0c307ef94d1020eb8  /EFI/ubuntu/MokManager.efi




============================ Disks SMART attributes: ===========================

### ATA disks: sda

# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HFS128G39TND-N210A
Firmware Version: 30001P10
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr  1 00:14:11 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   166   166   006    -    0
  5 Reallocated_Sector_Ct   -O--CK   253   100   036    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    278
 12 Power_Cycle_Count       -O--CK   100   100   020    -    307
100 Unknown_Attribute       -O--CK   100   100   000    -    510950
168 Unknown_Attribute       -O--CK   100   100   000    -    4
169 Unknown_Attribute       -O--CK   094   094   000    -    73
171 Unknown_Attribute       -O--CK   253   253   000    -    0
172 Unknown_Attribute       -O--CK   253   253   000    -    0
174 Unknown_Attribute       ----CK   100   100   000    -    23
175 Program_Fail_Count_Chip -O--CK   253   253   000    -    0
176 Erase_Fail_Count_Chip   -O--CK   253   253   000    -    0
177 Wear_Leveling_Count     -O--CK   099   099   000    -    15
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   000    -    13
179 Used_Rsvd_Blk_Cnt_Tot   -O--CK   100   100   000    -    75
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK   100   100   000    -    2565
184 End-to-End_Error        -O--CK   253   253   000    -    0
187 Reported_Uncorrect      -O--CK   253   253   000    -    0
188 Command_Timeout         -O--CK   253   253   000    -    0
194 Temperature_Celsius     -O----   031   000   000    -    31 (Min/Max 12/43)
195 Hardware_ECC_Recovered  -O--CK   253   253   000    -    0
196 Reallocated_Event_Count -O--CK   253   100   036    -    0
198 Offline_Uncorrectable   -O--CK   253   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   253   253   000    -    0
204 Soft_ECC_Correction     -OSR--   100   020   000    -    51
212 Unknown_Attribute       -O--CK   253   253   000    -    0
234 Unknown_Attribute       -O--CK   100   100   000    -    2117
241 Total_LBAs_Written      -O--CK   100   100   000    -    566
242 Total_LBAs_Read         -O--CK   100   100   000    -    712
250 Read_Error_Retry_Rate   -O--CK   100   100   000    -    295880
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 0
No Errors Logged



### USB disks: sdb

# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.




=============================== StdErr Messages: ===============================

ls: cannot access '/boot/vmlinuz-*': No such file or directory

Dernière modification par malbo (Le 01/04/2017, à 09:17)

Hors ligne

#9 Le 01/04/2017, à 09:47

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour
Dans un premier temps, bootes en Live-usb, Choisis 'essayer avant d'installer' puis mets le clavier en français s'il ne l'est pas avec la commande
"setxkbmap  fr"    qu'il faudra certainement écrire "setxkb,qp  fr
puis montes la partition  racine

sudo   mount    -v     /dev/sda3     /mnt

et ouvres le fichier de boot

sudo gedit   /mnt/boot/grub/grub.cfg

puis cherches la première ligne

	linux	/boot/vmlinuz-4.8.0-22-generic.efi.signed root=UUID=8d5528c9-5cde-4a12-b573-42444c635260 ro  quiet splash $vt_handoff (

Elle est certainement en ligne 150. Modifies-la en

	linux	/boot/vmlinuz-4.8.0-22-generic.efi.signed root=UUID=8d5528c9-5cde-4a12-b573-42444c635260 ro  quiet splash modprobe.blacklist=nouveau $vt_handoff

sauvegardes, puis rebootes pour voir s'il y a du changement

Dernière modification par Bougron (Le 01/04/2017, à 09:50)

Hors ligne

#10 Le 01/04/2017, à 09:50

malbo

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

@Bougron : pourquoi proposer d'utiliser le paramètre de noyau modprobe.blacklist=nouveau alors qu'il n'y a pas de carte graphique NVIDIA dans cet ordi ?

Hors ligne

#11 Le 01/04/2017, à 10:16

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour Malbo
Comme l'installation s'est faite normalement sans aucun paramétrage. Je ne vois pas le besoin de proposer NOMODEST  (mon favori).
Il me semble pourtant que c'est un problème graphique. D'où ce second choix. Je ne suis pas certain que ce choix soit exclusivement pour les NVIDIA.
Sinon   une option "acpi=off " ?

Hors ligne

#12 Le 01/04/2017, à 11:36

Laurent85

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

En effet le paramètre modprobe.blacklist=nouveau ne concerne que les cartes Nvidia, le nom du module "nouveau" c'est le nom du pilote libre des cartes Nvidia.

Désactive Secure Boot dans le bios au moins le temps de régler le problème.

Je ne vois pas d'explication autre qu'un problème de bios ou d'acpi étant donné qu'en session live ça marche et pas la version installée. J'essaierais d'installer plutôt la version 16.04.2 mieux suivie, et la 16.10 sera périmée dans 3 mois.

Dernière modification par Laurent85 (Le 01/04/2017, à 11:37)

Hors ligne

#13 Le 01/04/2017, à 18:02

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour à tous.

J'ai installé la version 16.04.02 et le problème persiste. J'ai refais les commandes que Laurent85 m'a donné à faire en voici le résultat :
http://paste.openstack.org/show/605139/ et au cas que le fichier disparaisse de l'hébergeur :

bisnext report id 21601

                                 bisnext 0.01


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    2048 of the same hard drive for core.img, but core.img can not be found at 
    this location.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Boot/bootx64.efi /efi/ubuntu/fwupx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/MokManager.efi 
                       /efi/ubuntu/shimx64.efi 
                       /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /efi/BOOT/grubx64.efi

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   250,069,679   250,069,679  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   209,106,943   208,056,320 Data partition (Windows/Linux)
/dev/sda3           209,106,944   250,068,991    40,962,048 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.4 GiB, 7918845952 bytes, 15466496 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 4,294,967,295 4,294,967,295  ee GPT

/dev/sdb1 ends after the last sector of /dev/sdb

GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048    15,466,462    15,464,415 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        42A8-8FCE                              vfat       
/dev/sda2        5AA9703A5DB606DB                       ntfs       
/dev/sda3        8537481a-9167-4abb-b27d-048aa6e79933   ext4       
/dev/sdb1        4ABE-B32F                              vfat       UBUNTU 16_0

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr  1 15:40 ata-HFS128G39TND-N210A_FS6CN56091090CH0N -> ../../sda
lrwxrwxrwx 1 root root 10 Apr  1 15:40 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr  1 15:40 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr  1 15:40 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Apr  1 15:40 usb-_USB_DISK_3.0_070157A04E279C43-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr  1 15:40 usb-_USB_DISK_3.0_070157A04E279C43-0:0-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
else
  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8537481a-9167-4abb-b27d-048aa6e79933' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
	else
	  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
	fi
	linux	/boot/vmlinuz-4.8.0-36-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash modprobe.blacklist=nouveau $vt_handoff
	initrd	/boot/initrd.img-4.8.0-36-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-42A8-8FCE' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  42A8-8FCE
	else
	  search --no-floppy --fs-uuid --set=root 42A8-8FCE
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=8537481a-9167-4abb-b27d-048aa6e79933 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=42A8-8FCE  /boot/efi       vfat    umask=0077      0       1
--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 104.004890442 = 111.674400768  boot/grub/grub.cfg                             1
 100.869098663 = 108.307369984  boot/vmlinuz-4.8.0-36-generic                  2
 103.999046326 = 111.668125696  boot/vmlinuz-4.8.0-36-generic.efi.signed       1
 100.869098663 = 108.307369984  vmlinuz                                        2
 101.091056824 = 108.545695744  boot/initrd.img-4.8.0-36-generic               3
 101.091056824 = 108.545695744  initrd.img                                     3

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1

==================================== inxi report: ==============================

System:    Kernel: 4.8.0-36-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: laptop System: Acer product: Swift SF314-51 v: V1.07
           Mobo: Acer model: M3_SK v: V1.07
           UEFI: Insyde v: V1.07 date: 11/24/2016
           Chassis: type: 10
Battery    BAT0: charge: 27.6 Wh 85.8% condition: 32.1/32.2 Wh (100%)
           volts: 16.2/15.2
           model: OEM AC14B8K status: Discharging
CPU:       Dual core Intel Core i3-6006U (-HT-MCP-) cache: 3072 KB bmips: 7968 
           clock speeds: min/max: 400/2000 MHz 1: 1161 MHz 2: 508 MHz
           3: 512 MHz 4: 521 MHz
           CPU Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
           arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov
           constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts eagerfpu epb ept
           erms est f16c flexpriority fma fpu fsgsbase fxsr ht hwp
           hwp_act_window hwp_epp hwp_notify intel_pt invpcid lahf_lm lm mca
           mce mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
           pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts
           rdrand rdseed rdtscp rep_good sdbg sep smap smep ss sse sse2 sse4_1
           sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust
           tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec
           xsaveopt xsaves xtopology xtpr
Memory:    Array-1 capacity: 4 GB devices: 2 EC: None
           Device-1: ChannelA-DIMM0 size: 2 GB speed: 2133 MHz type: DDR4
           manufacturer: SK Hynix part: HMA425S6AFR6N-TF
           Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
           Device-3: ChannelB-DIMM0 size: 2 GB speed: 2133 MHz type: DDR4
           manufacturer: SK Hynix part: HMA425S6AFR6N-TF
           Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
           Device-5: N/A size: N/A type: N/A
           Device-6: N/A size: N/A type: N/A
           Device-7: N/A size: N/A type: N/A
Graphics:  Card: Intel Sky Lake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:1916
           Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 1366x768@60.06hz
           GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
           GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-LP HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:9d70
           Sound: Advanced Linux Sound Architecture v: k4.8.0-36-generic
Network:   Card: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
           driver: ath10k_pci bus-ID: 02:00.0 chip-ID: 168c:003e
           IF: wlp2s0 state: up mac: <filter>
Drives:    HDD Total Size: 136.0GB (1.1% used)
           ID-1: /dev/sda model: HFS128G39TND size: 128.0GB
          
           ID-2: USB /dev/sdb model: USB_DISK_3.0 size: 7.9GB
          
           Optical: No optical drives detected.
Partition: ID-1: /cdrom size: 7.4G used: 1.5G (20%) fs: vfat dev: /dev/sdb1
           label: UBUNTU 16_0 uuid: 4ABE-B32F
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
           ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
           ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
           ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
           ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
           ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
           ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
           ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
           ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
           ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
           ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
           ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
           ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
           ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
           ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
           ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
           ID-17: /dev/sda1 size: 0.54G
           fs: FAT (32 bit) label: N/A uuid: 42A8-8FCE
           ID-18: /dev/sda2 size: 106.52G
           fs: NTFS label: N/A uuid: 5AA9703A5DB606DB
           ID-19: /dev/sda3 size: 20.97G
           fs: ext4 label: N/A uuid: 8537481a-9167-4abb-b27d-048aa6e79933
Sensors:   None detected - is lm-sensors installed and configured?
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
           deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 12.8% command: firefox pid: 2801 mem: 297.40MB (7.7%)
           2: cpu: 7.1% command: plugin-container pid: 2914 mem: 280.02MB (7.3%)
           3: cpu: 3.9% command: compiz pid: 2224 mem: 134.53MB (3.5%)
           4: cpu: 3.6% command: Xorg pid: 1735 mem: 73.39MB (1.9%)
           5: cpu: 2.0% command: bash pid: 8790 mem: 4.51MB (0.1%)
           6: cpu: 1.2% command: init pid: 1 mem: 5.78MB (0.1%)
           7: cpu: 0.8% command: gnome-terminal-server pid: 3037 mem: 34.09MB (0.8%)
           8: cpu: 0.7% command: ibus-daemon pid: 1923 mem: 7.62MB (0.1%)
           9: cpu: 0.5% command: nm-applet pid: 2322 mem: 53.68MB (1.4%)
           10: cpu: 0.4% command: NetworkManager pid: 1496 mem: 15.92MB (0.4%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 297.40MB (7.7%) command: firefox pid: 2801 cpu: 12.8%
           2: mem: 280.52MB (7.3%) command: plugin-container pid: 2914 cpu: 7.1%
           3: mem: 134.53MB (3.5%) command: compiz pid: 2224 cpu: 3.9%
           4: mem: 73.39MB (1.9%) command: Xorg pid: 1735 cpu: 3.6%
           5: mem: 58.41MB (1.5%) command: evolution-calendar-factory pid: 2238 cpu: 0.0%
           6: mem: 53.68MB (1.4%) command: nm-applet pid: 2322 cpu: 0.5%
           7: mem: 50.84MB (1.3%) command: evolution-calendar-factory-subprocess pid: 2272 cpu: 0.0%
           8: mem: 49.05MB (1.2%) command: evolution-calendar-factory-subprocess pid: 2260 cpu: 0.0%
           9: mem: 44.16MB (1.1%) command: nautilus pid: 2323 cpu: 0.2%
           10: mem: 34.89MB (0.9%) command: hud-service pid: 2059 cpu: 0.0%
Info:      Processes: 239 Uptime: 10 min Memory: 1107.9/3815.8MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


=================================== rfkill: ===================================

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: acer-wireless: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: acer-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
3: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no


=================================== lsusb: ====================================

Bus 002 Device 002: ID 13fe:5500 Kingston Technology Company Inc. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 04f2:b573 Chicony Electronics Co., Ltd 
Bus 001 Device 003: ID 1c7a:0570 LighTuning Technology Inc. 
Bus 001 Device 002: ID 04ca:3016 Lite-On Technology Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 5: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M


=================================== cmdline: ==================================

BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---


==================================== dmesg: ===================================

[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x8a500000  SMBIOS 3.0=0x8a4fe000  ESRT=0x8a501d18  ACPI 2.0=0x8aefe014 
[    0.000000] ACPI: UEFI 0x000000008AEFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000008AEFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.204296] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.242376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    6.580903] efifb: probing for efifb
[    6.580916] efifb: framebuffer at 0xa0000000, using 4160k, total 4160k
[    6.580917] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    6.580917] efifb: scrolling: redraw
[    6.580919] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    6.585681] fb0: EFI VGA frame buffer device
[    6.631621] EFI Variables Facility v0.08 2004-May-17
[    6.825391] fb: switching to inteldrmfb from EFI VGA
[    6.849994] [drm] GuC firmware load skipped
[    8.458858] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x4d5f03)
[   16.602189] tpm_crb: probe of MSFT0101:00 failed with error -16
[   17.341160] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[   17.341197] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[   17.341246] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[   17.341249] ath10k_pci 0000:02:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[   17.364979] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5


============================= boot-up statistics: =============================

Startup finished in 8.621s (firmware) + 1.657s (loader) + 16.032s (kernel) + 2.226s (userspace) = 28.537s


blame, first 10:
dev-sdb1.device          1.510s
dev-loop0.device         1.235s
accounts-daemon.service  778ms
NetworkManager.service   706ms
alsa-restore.service     706ms
ModemManager.service     698ms
networking.service       680ms
lvm2-monitor.service     658ms
systemd-logind.service   615ms
thermald.service         609ms


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @2.207s
  2 multi-user.target @2.207s
  3 getty.target @2.207s
  4 getty@tty1.service @2.207s
  5 rc-local.service @2.139s +9ms
  6 network.target @2.122s
  7 NetworkManager.service @1.415s +706ms
  8 dbus.service @1.216s
  9 basic.target @1.200s
 10 sockets.target @1.200s
 11 snapd.socket @1.198s +838us
 12 sysinit.target @1.195s
 13 apparmor.service @961ms +208ms
 14 local-fs.target @958ms
 15 tmp.mount @952ms +6ms
 16 local-fs-pre.target @920ms
 17 lvm2-monitor.service @261ms +658ms
 18 lvm2-lvmetad.service @375ms
 19 system.slice @235ms
 20 -.slice @233ms


================================== locales: ===================================

locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=

/etc/default/locale:
LANG="en_US.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"


====================================== Modules: ================================

Module                  Size  Used by
ablk_helper            16384  1 aesni_intel
ac97_bus               16384  1 snd_soc_core
acer_wmi               20480  0
acpi_pad               24576  0
aesni_intel           167936  2
aes_x86_64             20480  1 aesni_intel
ahci                   36864  0
arc4                   16384  2
ath10k_core           335872  1 ath10k_pci
ath10k_pci             45056  0
ath                    32768  1 ath10k_core
aufs                  241664  5590
autofs4                40960  2
bluetooth             557056  33 btrtl,hci_uart,btintel,btqca,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  2 hci_uart,btusb
btintel                16384  2 hci_uart,btusb
btqca                  16384  1 hci_uart
btrtl                  16384  1 btusb
btusb                  45056  0
ccm                    20480  1
cfg80211              581632  3 mac80211,ath,ath10k_core
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
dm_log                 20480  2 dm_mirror,dm_region_hash
dm_mirror              24576  0
dm_region_hash         24576  1 dm_mirror
drm                   368640  6 i915,drm_kms_helper
drm_kms_helper        167936  1 i915
fb_sys_fops            16384  1 drm_kms_helper
fjes                   28672  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               98304  0
hid                   122880  2 i2c_hid,hid_multitouch
hid_multitouch         20480  0
i2c_algo_bit           16384  1 i915
i2c_designware_core    20480  1 i2c_designware_platform
i2c_designware_platform    16384  0
i2c_hid                20480  0
i915                 1310720  96
idma64                 20480  0
input_leds             16384  0
intel_cstate           16384  0
intel_lpss             16384  2 intel_lpss_pci,intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_lpss_pci         16384  0
intel_pch_thermal      16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
joydev                 20480  0
kvm                   598016  1 kvm_intel
kvm_intel             192512  0
libahci                32768  1 ahci
lp                     20480  0
lrw                    16384  1 aesni_intel
mac80211              761856  1 ath10k_core
mac_hid                16384  0
media                  40960  2 uvcvideo,videodev
mei                   102400  1 mei_me
mei_me                 40960  0
memstick               20480  1 rtsx_usb_ms
nls_iso8859_1          16384  1
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               139264  0
rfcomm                 77824  2
rtsx_usb               24576  2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms            20480  0
rtsx_usb_sdmmc         28672  0
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  19 snd_compress,snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress           20480  1 snd_soc_core
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core       28672  1 snd_soc_skl
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_soc_core          233472  1 snd_soc_skl
snd_soc_skl            65536  0
snd_soc_skl_ipc        45056  1 snd_soc_skl
snd_soc_sst_dsp        32768  1 snd_soc_skl_ipc
snd_soc_sst_ipc        16384  1 snd_soc_skl_ipc
snd_soc_sst_match      16384  1 snd_soc_skl
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 acer_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tpm_crb                16384  0
uas                    24576  0
ucsi                   16384  0
usb_storage            73728  2 uas
uvcvideo               90112  0
video                  40960  2 acer_wmi,i915
videobuf2_core         40960  2 uvcvideo,videobuf2_v4l2
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_vmalloc      16384  1 uvcvideo
videodev              180224  3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma               16384  1 idma64
wmi                    16384  1 acer_wmi
x86_pkg_temp_thermal    16384  0


==================================== xorg: ===================================

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ ELAN0501:00 04F3:3037 Touchpad          	id=11	[slave  pointer  (2)]
⎜   ↳ ETPS/2 Elantech Touchpad                	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Video Bus                               	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ HD WebCam                               	id=10	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
    ↳ Acer WMI hotkeys                        	id=14	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
   1366x768      60.06*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)


============================== Additional drivers: =============================

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free



============================= Upgradable packages: =============================

Live Session


================================ Broken packages: ==============================

Live Session


======================== Package configuration pending: ========================

None


========================== Package install interrupted: ========================

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 157 not upgraded.


========================= UEFI Boot Manager settings: ==========================

BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0003,0001,0002,2001,2002,2003
Boot0000* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot0001* Windows Boot Manager	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...8................
Boot0002* Linux	HD(1,GPT,047a0e8a-187d-4990-883e-bed9336013c7,0x800,0xebf7df)/File(\EFI\Boot\grubx64.efi)RC
Boot0003* Ubuntu	PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)/HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)A01 ..
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC


================================== Secure Boot: ================================

Secure Boot disabled or not supported on this system.


============================= md5sum of efi files: =============================

EFI files in /dev/sda1:
18a3724224b0f82a36941982259339b6  /EFI/Microsoft/Boot/bootmgfw.efi
4e3a2ee37111132b1bb95323dfc123d2  /EFI/Microsoft/Boot/bootmgr.efi
7cca888cd018f2fcf3be6383f7073d1e  /EFI/Microsoft/Boot/memtest.efi
18a3724224b0f82a36941982259339b6  /EFI/Boot/bootx64.efi
d73bbea8b6c047d2a706472f87d3ccdb  /EFI/ubuntu/fwupx64.efi
d630d48b2318928de1206fd2efa2b654  /EFI/ubuntu/grubx64.efi
ded965934506efb38a6dcb9ac5b2b79e  /EFI/ubuntu/shimx64.efi
ba8a7979ac57f1c0c307ef94d1020eb8  /EFI/ubuntu/MokManager.efi




============================ Disks SMART attributes: ===========================

### ATA disks: sda

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HFS128G39TND-N210A
Firmware Version: 30001P10
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr  1 15:50:32 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   166   166   006    -    0
  5 Reallocated_Sector_Ct   -O--CK   253   100   036    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    280
 12 Power_Cycle_Count       -O--CK   100   100   020    -    315
100 Unknown_Attribute       -O--CK   100   100   000    -    514549
168 Unknown_Attribute       -O--CK   100   100   000    -    4
169 Unknown_Attribute       -O--CK   094   094   000    -    73
171 Unknown_Attribute       -O--CK   253   253   000    -    0
172 Unknown_Attribute       -O--CK   253   253   000    -    0
174 Unknown_Attribute       ----CK   100   100   000    -    28
175 Program_Fail_Count_Chip -O--CK   253   253   000    -    0
176 Erase_Fail_Count_Chip   -O--CK   253   253   000    -    0
177 Wear_Leveling_Count     -O--CK   099   099   000    -    15
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   000    -    13
179 Used_Rsvd_Blk_Cnt_Tot   -O--CK   100   100   000    -    75
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK   100   100   000    -    2565
184 End-to-End_Error        -O--CK   253   253   000    -    0
187 Reported_Uncorrect      -O--CK   253   253   000    -    0
188 Command_Timeout         -O--CK   253   253   000    -    0
194 Temperature_Celsius     -O----   031   000   000    -    31 (Min/Max 12/43)
195 Hardware_ECC_Recovered  -O--CK   253   253   000    -    0
196 Reallocated_Event_Count -O--CK   253   100   036    -    0
198 Offline_Uncorrectable   -O--CK   253   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   253   253   000    -    0
204 Soft_ECC_Correction     -OSR--   100   020   000    -    42
212 Unknown_Attribute       -O--CK   253   253   000    -    0
234 Unknown_Attribute       -O--CK   100   100   000    -    2130
241 Total_LBAs_Written      -O--CK   100   100   000    -    573
242 Total_LBAs_Read         -O--CK   100   100   000    -    723
250 Read_Error_Retry_Rate   -O--CK   100   100   000    -    298050
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 0
No Errors Logged



### USB disks: sdb

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.




=============================== StdErr Messages: ===============================

ls: cannot access '/boot/vmlinuz-*': No such file or directory

Secure boot est désactivé

J'ai également essayé la solution de Bougron, et ne marche pas non plus

Merci encore de votre aide

Dernière modification par Niicootine (Le 01/04/2017, à 18:03)

Hors ligne

#14 Le 01/04/2017, à 18:22

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Parlais-tu de cette option  "acpi=off " ?

Hors ligne

#15 Le 01/04/2017, à 18:50

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bougron a écrit :

Parlais-tu de cette option  "acpi=off " ?

Non, je parlais de modprob.blacklist=nouveau

Hors ligne

#16 Le 01/04/2017, à 19:19

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

C'est la 3eme piste à essayer....   Elle peut d'ailleurs se mettre à la place de celle que j'ai proposé un peu vite.

bisnext a écrit :

    linux    /boot/vmlinuz-4.8.0-36-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash modprobe.blacklist=nouveau $vt_handoff
    initrd    /boot/initrd.img-4.8.0-36-generic
}

--- Notice bisnext removed the submenu section from the report for readability

Cela me semble une bon choix

Dernière modification par Bougron (Le 01/04/2017, à 19:22)

Hors ligne

#17 Le 01/04/2017, à 19:41

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

C'est bon, le problème est réglé avec l'option apci=off.

Un autre problème est apparu : le pad ne marchait pas. Pour corriger cela, il faut ajouter "i8042.reset i8042.nomux i8042.nopnp i8042.noloop" dans la ligne GRUB_CMDLINE_LINUX_DEFAULT du fichier /etc/default/grub (source)

Un énorme merci à vous ==> je passe en résolu

Hors ligne

#18 Le 01/04/2017, à 19:52

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Il te reste à reporter ces paramètres dans le bon fichier "/etc/default/grub", ligne "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
puis à les valider avec la commande

sudo update-grub

Hors ligne

#19 Le 01/04/2017, à 19:54

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Oui c'est fait !
Tout fonctionne à merveille, que plaisir (et soulagement) !

Encore merci

Hors ligne

#20 Le 02/04/2017, à 08:41

malbo

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour,
Je viens d'ajouter ton modèle Swift 3 SF314-51-39ZJ dans la Liste des portables « Acer ».
Pour mémoire, ce modèle - visible sur cette page - est équipé d'un processeur Intel Core i3-6006U ; la partie graphique "Intel HD Graphics 520" est intégrée sur la même puce que le processeur (il n'y a pas de carte graphique dédiée). Je ne digère pas qu'il faille ajouter le paramètre de noyau "acpi=off " pour faire fonctionner correctement ce modèle. Ce paramètre "acpi=off ", je le considère comme indésirable(*) et j'espère que tu pourras t'en passer un jour.

Pour que ça puisse servir d'exemple d'installation dans ce modèle, ce serait utile qu'on ait l'état final de ton dual-boot, aussi je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse.

(*) il a des effets collatéraux plus ou moins visibles. Un effet visible (dans certains cas), c'est l'impossibilité d'éteindre normalement l'ordi (il faut alors faire un arrêt de sauvage par appui prolongé sur le bouton Power)

Dernière modification par malbo (Le 02/04/2017, à 08:46)

Hors ligne

#21 Le 02/04/2017, à 11:34

Bougron

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour.
à lire aussi https://forum.ubuntu-fr.org/viewtopic.p … #p21675282
Une autre discussion indique que acpi=off empêche le fonctionnent du touchpad que tu as solutionné avec d'autres options.

Dernière modification par Bougron (Le 02/04/2017, à 11:35)

Hors ligne

#22 Le 02/04/2017, à 13:07

Laurent85

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Concernant l'ACPI if faut aller voir de temps à autres si une mise à jour du bios est disponible.

En attendant il faut tester avec des paramètres acpi moins violents que off, vois les suvants, l'un, l'autre ou les deux, si ça marche c'est bien mieux que off :

acpi_osi=! 
acpi_enforce_resources=lax

Hors ligne

#23 Le 02/04/2017, à 13:58

malbo

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Moi en enquêtant avec l'aide de Google, je me rends compte que je ne trouve aucune preuve que le processeur Intel Core i3-6006U (qui équipe le modèle de Niicootine) soit géré actuellement par le noyau Linux. Si quelqu'un trouve quelque chose qui montre le contraire, je suis intéressé de connaître sa source.

Hors ligne

#24 Le 02/04/2017, à 14:54

Niicootine

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Bonjour à vous.
Voila le rapport de boot-info.

Pour avoir testé les différents paramètres acpi, aucune des trois combinaisons ne fonctionne ...

Dernière modification par Niicootine (Le 02/04/2017, à 15:10)

Hors ligne

#25 Le 02/04/2017, à 18:12

malbo

Re : [RÉSOLU] Installation Ubuntu impossible sur Acer-Swift 3

Ton Boot-Info est là :

     

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    2048 of the same hard drive for core.img, but core.img can not be found at 
    this location.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   250,069,679   250,069,679  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   209,106,943   208,056,320 Data partition (Windows/Linux)
/dev/sda3           209,106,944   250,068,991    40,962,048 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        42A8-8FCE                              vfat       
/dev/sda2        5AA9703A5DB606DB                       ntfs       
/dev/sda3        8537481a-9167-4abb-b27d-048aa6e79933   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr  2 14:50 ata-HFS128G39TND-N210A_FS6CN56091090CH0N -> ../../sda
lrwxrwxrwx 1 root root 10 Apr  2 14:50 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr  2 14:50 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr  2 14:50 ata-HFS128G39TND-N210A_FS6CN56091090CH0N-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda3        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
else
  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8537481a-9167-4abb-b27d-048aa6e79933' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
	else
	  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
	fi
	linux	/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off $vt_handoff
	initrd	/boot/initrd.img-4.8.0-45-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-8537481a-9167-4abb-b27d-048aa6e79933' {
	menuentry 'Ubuntu, avec Linux 4.8.0-45-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-45-generic-advanced-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-45-generic…'
		linux	/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-45-generic
	}
	menuentry 'Ubuntu, with Linux 4.8.0-45-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-45-generic-init-upstart-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-45-generic…'
		linux	/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-45-generic
	}
	menuentry 'Ubuntu, with Linux 4.8.0-45-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-45-generic-recovery-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-45-generic…'
		linux	/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-45-generic
	}
	menuentry 'Ubuntu, avec Linux 4.8.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-advanced-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-36-generic…'
		linux	/boot/vmlinuz-4.8.0-36-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.8.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-init-upstart-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-36-generic…'
		linux	/boot/vmlinuz-4.8.0-36-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro  quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.8.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-recovery-8537481a-9167-4abb-b27d-048aa6e79933' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3  8537481a-9167-4abb-b27d-048aa6e79933
		else
		  search --no-floppy --fs-uuid --set=root 8537481a-9167-4abb-b27d-048aa6e79933
		fi
		echo	'Chargement de Linux 4.8.0-36-generic…'
		linux	/boot/vmlinuz-4.8.0-36-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.8.0-36-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-42A8-8FCE' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  42A8-8FCE
	else
	  search --no-floppy --fs-uuid --set=root 42A8-8FCE
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=8537481a-9167-4abb-b27d-048aa6e79933 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=42A8-8FCE  /boot/efi       vfat    umask=0077      0       1
--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  99.888462067 = 107.254419456  boot/grub/grub.cfg                             1
 100.869098663 = 108.307369984  boot/vmlinuz-4.8.0-36-generic                  2
 103.999046326 = 111.668125696  boot/vmlinuz-4.8.0-36-generic.efi.signed       1
 101.591762543 = 109.083324416  boot/vmlinuz-4.8.0-45-generic                  1
 102.244110107 = 109.783777280  boot/vmlinuz-4.8.0-45-generic.efi.signed       1
 101.591762543 = 109.083324416  vmlinuz                                        1
 100.869098663 = 108.307369984  vmlinuz.old                                    2
 101.091056824 = 108.545695744  boot/initrd.img-4.8.0-36-generic               3
 102.372299194 = 109.921419264  boot/initrd.img-4.8.0-45-generic               2
 102.372299194 = 109.921419264  initrd.img                                     2
 101.091056824 = 108.545695744  initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 2017-04-02__14h50 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.2 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=8537481a-9167-4abb-b27d-048aa6e79933 ro quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off vt.handoff=7

=================== os-prober:
/dev/sda3:L'OS actuellement utilisé - Ubuntu 16.04.2 LTS CurrentSession:linux
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/sda1: UUID="42A8-8FCE" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="4713c733-8173-4c36-852f-0ad5bca3b201"
/dev/sda2: UUID="5AA9703A5DB606DB" TYPE="ntfs" PARTUUID="d5a39d76-a3a1-49c5-9919-3748b46132c5"
/dev/sda3: UUID="8537481a-9167-4abb-b27d-048aa6e79933" TYPE="ext4" PARTUUID="e9afce50-7c44-4c00-99cc-1eecf613fa5c"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda2.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril  1 19:19 grub.d
total 80
-rwxr-xr-x 1 root root  9791 janv. 13 17:26 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars   1 22:01 10_linux
-rwxr-xr-x 1 root root 11082 janv. 13 17:26 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 janv. 13 17:26 30_os-prober
-rwxr-xr-x 1 root root  1418 janv. 13 17:26 30_uefi-firmware
-rwxr-xr-x 1 root root   214 janv. 13 17:26 40_custom
-rwxr-xr-x 1 root root   216 janv. 13 17:26 41_custom
-rw-r--r-- 1 root root   483 janv. 13 17:26 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda3: UUID=42A8-8FCE   (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0001,2001,2002,2003
Boot0000* Ubuntu	PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)/HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)A01 ..
Boot0001* Windows Boot Manager	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...8................
Boot0002* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0003* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda3	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA HFS128G39TND-N21 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End    Size    File system  Name                  Flags
1      1049kB  538MB  537MB   fat32        EFI System Partition  boot, esp
2      538MB   107GB  107GB   ntfs                               msftdata
3      107GB   128GB  21.0GB  ext4

=================== parted -lm:

BYT;
/dev/sda:128GB:scsi:512:4096:gpt:ATA HFS128G39TND-N21:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:107GB:107GB:ntfs::msftdata;
3:107GB:128GB:21.0GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        119,2G
sda2  part ntfs    99,2G
sda3  part ext4    19,5G
sda1  part vfat     512M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      0  0  0 running
sda2     0  0  0         /mnt/boot-sav/sda2
sda3     0  0  0         /
sda1     0  0  0         /boot/efi


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1933016k,nr_inodes=483254,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=390840k,mode=755)
/dev/sda3 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=11386)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=390840k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd full fuse hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 0e 18  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 f9 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 ce 8f a8 42 4e  4f 20 4e 41 4d 45 20 20  |..)...BNO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 45 72  |..............Er|
000001b0  72 2e 20 64 69 73 71 75  65 ff 0d 0a 50 72 65 73  |r. disque...Pres|
000001c0  73 65 7a 20 75 6e 65 20  74 6f 75 63 68 65 20 70  |sez une touche p|
000001d0  6f 75 72 20 72 65 64 82  6d 61 72 72 65 72 0d 0a  |our red.marrer..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 ba 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 10 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff af 66 0c 00 00 00 00  |..........f.....|
00000030  04 00 00 00 00 00 00 00  ff be e5 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  db 06 b6 5d 3a 70 a9 5a  |...........]:p.Z|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     382M  6.0M  376M   2% /run
/dev/sda3      ext4       20G  6.6G   12G  37% /
tmpfs          tmpfs     1.9G  464K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      508M   29M  480M   6% /boot/efi
tmpfs          tmpfs     382M   92K  382M   1% /run/user/1000
/dev/sda2      fuseblk   100G   44G   56G  45% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 72AB3EAF-C889-43C8-8817-2C6174EA0DD7

Device         Start       End   Sectors  Size Type
/dev/sda1       2048   1050623   1048576  512M EFI System
/dev/sda2    1050624 209106943 208056320 99.2G Microsoft basic data
/dev/sda3  209106944 250068991  40962048 19.5G Linux filesystem




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda3, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot use-standard-efi-file


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.




paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2

On a bien confirmation des paramètres du noyau dans cette ligne extrait de la partie "/etc/default/grub" du rapport :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop acpi=off"

Le paramétrage de l'UEFI est visible dans cette partie :

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0001,2001,2002,2003
Boot0000* Ubuntu	PciRoot(0x0)/Pci(0x17,0x0)/Sata(1,0,0)/HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)A01 ..
Boot0001* Windows Boot Manager	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...8................
Boot0002* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0003* Unknown Device: 	HD(1,GPT,4713c733-8173-4c36-852f-0ad5bca3b201,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)

L'entrée Boot0000 désignée Ubuntu est celle que tu as créée avec la fonctionnalité "select an uefi file as trusted for executing" suivant le conseil de Laurent85 dans le post #2
C'est cette entrée Boot0000 qui est en priorité de démarrage et c'est celle qui a été utilisée pour la démarrage de la session depuis laquelle a été réalisé le Boot-Info (c'est ce que dit la ligne "BootCurrent: 0000")

Hors ligne