#1 Le 23/09/2018, à 12:34
- Steph2811
[Résolu] Install réussie Lenovo Ideapad 120S
Bonjour,
Pour partage, je viens d'acquérir un Lenovo Ideapad 120S 14IAP. Ne le trouvant pas dans la liste des portables Lenovo, je me permet de faire un retour sur l'installation.
Le modèle exact est :
Ideapad 120S-14IAP
Intel Pentium N4200 1.1 GHz x4
4Go de RAM
SSD 128 Go
Intel HD Graphics 505
Il était pré-équipé Windows 10.
Au premier démarrage, je suis entré dans l'UEFI (touche F2 sur ce modèle) pour désactiver le secure boot et changer l'ordre du boot pour mettre l'USB en premier. Lancement immédiat d'une session USB Live qui n'a pas montré de problème.
Donc installation d'Ubuntu 18.04.01 dans la foulée en virant en même temps Windows 10 dont je n'ai pas besoin. Aucun souci rencontré. Testé à peu près tout sans aucun problème.
Voilà, j'espère que cela sera utile. Si c'est ok pour vous, je mettrais en [résolu]
Merci et à bientôt
Dernière modification par Steph2811 (Le 23/09/2018, à 13:18)
Hors ligne
#2 Le 23/09/2018, à 12:38
- nam1962
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Sympa 
Pour info, peux tu donner :
sudo dmidecode -t 16
sudo dmidecode -t 17Sinon, tu peux améliorer l'usage de la RAM avec :
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.confDernière modification par nam1962 (Le 23/09/2018, à 12:39)
[ Modéré ]
Hors ligne
#3 Le 23/09/2018, à 12:41
- Nuliel
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Bonjour,
Ne le trouvant pas dans la liste des portables Lenovo, je me permet de faire un retour sur l'installation.
Excellente idée, il est maintenant dans la liste
Tu peux faire un boot info
Dernière modification par Nuliel (Le 23/09/2018, à 12:47)
Hors ligne
#4 Le 23/09/2018, à 13:15
- Steph2811
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Merci à tous les deux pour vos retours rapides !
A Naziel, voici le boot-info
A Nam1962, pour voici les retours pour dmidecode -t 16 :
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present
Handle 0x0004, DMI type 16 , 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Connection Type: None
Maximum Capacity: 8Gb
Error Information Handle: Not Provided
Number Of Devices: 2Et pour dmidecode -t 17 :
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x0005, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0006, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 1
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: UnknownPour mon info perso, cela sert à quoi exactement ? (je suis ignare mais je cherche à m'améliorer
Et merci pour l'astuce pour la RAM.
Hors ligne
#5 Le 23/09/2018, à 13:21
- Nuliel
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Hop, le boot info
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 250,068,991 249,018,368 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1 E959-731E vfat
/dev/sda2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Sep 23 13:59 wwn-0x5000000000000000 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 23 13:59 wwn-0x5000000000000000-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 23 13:59 wwn-0x5000000000000000-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
linux /boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-34-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
menuentry 'Ubuntu, avec Linux 4.15.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-34-generic-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
echo 'Chargement de Linux 4.15.0-34-generic…'
linux /boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-34-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-34-generic-recovery-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
echo 'Chargement de Linux 4.15.0-34-generic…'
linux /boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-34-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=E959-731E /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
92.760288239 = 99.600601088 boot/grub/grub.cfg 3
36.641826630 = 39.343861760 boot/vmlinuz-4.15.0-29-generic 1
4.848518372 = 5.206056960 boot/vmlinuz-4.15.0-34-generic 1
36.641826630 = 39.343861760 vmlinuz 1
8.645320892 = 9.282842624 boot/initrd.img-4.15.0-29-generic 3
5.974552155 = 6.415126528 boot/initrd.img-4.15.0-34-generic 3
8.645320892 = 9.282842624 initrd.img 3
8.645320892 = 9.282842624 initrd.img.old 3
ADDITIONAL INFORMATION :
=================== log of boot-info 20180923_1359 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="E959-731E" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="e2cdb18a-2439-47ff-a07d-cc88e6a0f26c"
/dev/sda2: UUID="fc9c3c90-cdb2-4dbb-ae49-6da9067bb260" TYPE="ext4" PARTUUID="eb677ab2-a520-4545-b263-adfb14578127"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 sept. 22 16:23 grub.d
total 80
-rwxr-xr-x 1 root root 9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root 483 juil. 17 20:13 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=E959-731E (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0016,0012,0013,0014,0015,0017,0018,001A,0019
Boot0000* ubuntu HD(1,GPT,e2cdb18a-2439-47ff-a07d-cc88e6a0f26c,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0010 Setup FvFile(721c8b66-426c-4e86-8e99-3457c46ab0b9)
Boot0011 Boot Menu FvFile(86488440-41bb-42c7-93ac-450fbf7766bf)
Boot0012* SATA SSD: HFS128G39TND-N210A PciRoot(0x0)/Pci(0x12,0x0)/Sata(1,0,0)..bYVD.A...O.*..
Boot0013* eMMC Card: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,63a04a38d7705b4888c69653c982e11401)
Boot0014* SATA HDD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,91af625956449f41a7b91f4f892ab0f600)
Boot0015* ATAPI CD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,aea2090adfde214e8b3a5e471856a354)
Boot0016* USB HDD: Philips USB Flash Drive PciRoot(0x0)/Pci(0x15,0x0)/USB(4,0)3.!..3.G..A.....
Boot0017* USB CD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,86701296aa5a7848b66cd49dd3ba6a55)
Boot0018* PCI LAN: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,78a84aaf2b2afc4ea79cf5cc8f3d3803)
Boot0019* USB LAN: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,e854bca4cae7704ca322b00da0376322)
Boot001A* USB FDD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,6ff015a28830b543a8b8641009461e49)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:gpt:ATA HFS128G39TND-N21:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:128GB:127GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 86,9M
loop1 loop squashfs 13M
loop2 loop squashfs 13M
loop3 loop squashfs 14,5M
loop4 loop squashfs 87,9M
loop5 loop squashfs 14,5M
loop6 loop squashfs 42,1M
loop7 loop squashfs 3,7M
loop8 loop squashfs 2,3M
loop9 loop squashfs 2,3M
loop10 loop squashfs 140,9M
loop11 loop squashfs 3,7M
loop12 loop squashfs 34,7M
sda disk 119,2G
sda1 part vfat 512M
sda2 part ext4 118,8G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/core/4917
loop1 1 1 0 /snap/gnome-characters/124
loop2 1 1 0 /snap/gnome-characters/103
loop3 1 1 0 /snap/gnome-logs/43
loop4 1 1 0 /snap/core/5328
loop5 1 1 0 /snap/gnome-logs/37
loop6 1 1 0 /snap/gtk-common-themes/701
loop7 1 1 0 /snap/gnome-system-monitor/57
loop8 1 1 0 /snap/gnome-calculator/180
loop9 1 1 0 /snap/gnome-calculator/238
loop10 1 1 0 /snap/gnome-3-26-1604/70
loop11 1 1 0 /snap/gnome-system-monitor/51
loop12 1 1 0 /snap/gtk-common-themes/319
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1903132k,nr_inodes=475783,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386680k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=11097)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_124.snap on /snap/gnome-characters/124 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_5328.snap on /snap/core/5328 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/var/lib/snapd/snaps/gnome-logs_43.snap on /snap/gnome-logs/43 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_701.snap on /snap/gtk-common-themes/701 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_238.snap on /snap/gnome-calculator/238 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=386680k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 gpiochip1 gpiochip2 gpiochip3 hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 1e 73 59 e9 4e 4f 20 4e 41 4d 45 20 20 |..).sY.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 378M 1.7M 377M 1% /run
/dev/sda2 ext4 117G 8.7G 102G 8% /
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/loop0 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop1 squashfs 13M 13M 0 100% /snap/gnome-characters/124
/dev/loop2 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop4 squashfs 88M 88M 0 100% /snap/core/5328
/dev/sda1 vfat 511M 4.7M 507M 1% /boot/efi
/dev/loop3 squashfs 15M 15M 0 100% /snap/gnome-logs/43
/dev/loop5 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop6 squashfs 43M 43M 0 100% /snap/gtk-common-themes/701
/dev/loop8 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/57
/dev/loop9 squashfs 2.3M 2.3M 0 100% /snap/gnome-calculator/238
/dev/loop10 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop11 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/loop12 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
tmpfs tmpfs 378M 28K 378M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/loop0: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 14.5 MiB, 15204352 bytes, 29696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 87.9 MiB, 92164096 bytes, 180008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 42.1 MiB, 44183552 bytes, 86296 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: EA6439F2-6D8F-4F44-B65E-28A0ABF84969
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 250068991 249018368 118.8G Linux filesystem
Disk /dev/loop8: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.(je le copie ici sinon il sera perdu dans un certain temps)
Les deux commandes de nam, ça sert à savoir combien de RAM on peut mettre au max dans le pc et quelles barettes on peut y mettre.
Tu peux donner le retour de
free -hcar d'après les commandes de nam, tu as 2 barettes de 1024 Mb et tu peux mettre 8 Gb de RAM max, et tu annonces au premier message avoir 4 Gb de RAM
Dernière modification par Nuliel (Le 23/09/2018, à 13:24)
Hors ligne
#6 Le 23/09/2018, à 13:46
- nam1962
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Naziel a écrit :
(...)
Les deux commandes de nam, ça sert à savoir combien de RAM on peut mettre au max dans le pc et quelles barettes on peut y mettre.
Tu peux donner le retour de
free -hcar d'après les commandes de nam, tu as 2 barettes de 1024 Mb et tu peux mettre 8 Gb de RAM max, et tu annonces au premier message avoir 4 Gb de RAM
+1 !
Cela sera utile et dans tous les cas, tu pourras nettement améliorer ton ordi à peu de frais en achetant des barrettes plus puissantes sur lebonc* ou pricemi*
[ Modéré ]
Hors ligne
#7 Le 23/09/2018, à 16:57
- Steph2811
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Ok,
Un grand merci à tous les deux pour ces infos et l'enrichissement de ma culture perso 
Effectivement, je peux aller jusqu'à 8Gb !
A très bientôt sans doute
Hors ligne
#8 Le 23/09/2018, à 18:20
- moko138
Re : [Résolu] Install réussie Lenovo Ideapad 120S
nam propose :
sudo dmidecode -t 16
sudo dmidecode -t 17- -
moko propose :
RAM que la carte-mère peut supporter. Merci de montrer :
sudo dmidecode -t 5
sudo dmidecode -t 16RAM présente. Merci de montrer :
sudo dmidecode -t 6
sudo dmidecode -t 17Ou bien, pour rediriger les 4 retours dans un fichier (ici nommé "memory-test.txt") du home :
cd ; echo " RAM POSSIBLE" > memory-test.txt ; echo "dmidecode -t 5" >> memory-test.txt ; sudo dmidecode -t 5 >> memory-test.txt ; echo >> memory-test.txt ; echo "dmidecode -t 16" >> memory-test.txt ; sudo dmidecode -t 16 >> memory-test.txt ; echo " = = = =" >> memory-test.txt ; echo >> memory-test.txt ; echo " RAM DÉTECTÉE" >> memory-test.txt ; echo "dmidecode -t 6" >> memory-test.txt ; sudo dmidecode -t 6 >> memory-test.txt ; echo >> memory-test.txt ; echo "dmidecode -t 17" >> memory-test.txt ; sudo dmidecode -t 17 >> memory-test.txtCe qui donne
RAM POSSIBLE
dmidecode -t 5
# dmidecode 2.11
SMBIOS 2.5 present.
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
dmidecode -t 16
# dmidecode 2.11
SMBIOS 2.5 present.
Handle 0x0013, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
= = = =
RAM DÉTECTÉE
dmidecode -t 6
# dmidecode 2.11
SMBIOS 2.5 present.
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
dmidecode -t 17
# dmidecode 2.11
SMBIOS 2.5 present.
Handle 0x0014, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: DDR2
Type Detail: None
Speed: 2048 MHz
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: DDR2
Type Detail: None
Speed: 2048 MHz
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 23/09/2018, à 18:54
- nam1962
Re : [Résolu] Install réussie Lenovo Ideapad 120S
Tiens, j'ai :
~]$ sudo dmidecode -t 5
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
~]$Comment l'interpréter ?
Dernière modification par nam1962 (Le 23/09/2018, à 18:55)
[ Modéré ]
Hors ligne
#10 Le 24/09/2018, à 17:49
- Steph2811
Re : [Résolu] Install réussie Lenovo Ideapad 120S
@ Naziel :
Oups désolé, j'avais oublié de te donner le retour que tu demandais pour free -h
total utilisé libre partagé tamp/cache disponible
Mem: 3,7G 1,2G 553M 243M 2,0G 2,0G
Partition d'échange: 2,0G 0B 2,0G@ Moko, voici les 4 retours :
RAM POSSIBLE
dmidecode -t 5
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
dmidecode -t 16
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x0004, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
= = = =
RAM DÉTECTÉE
dmidecode -t 6
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
dmidecode -t 17
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x0005, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0006, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 1
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0007, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelC-DIMM0
Bank Locator: BANK 2
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0008, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0004
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: ChannelD-DIMM0
Bank Locator: BANK 3
Type: LPDDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Micron
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: MT53B256M32D1NP-062AIT:C
Rank: Unknown
Configured Clock Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: UnknownVoilà pour les retours.
Et quelle est la signification ? Je persiste à m'améliorer
Hors ligne
#11 Le 25/09/2018, à 03:29
- moko138
Re : [Résolu] Install réussie Lenovo Ideapad 120S
nam1962 a écrit :
Tiens, j'ai :
~]$ sudo dmidecode -t 5 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 2.7 present. ~]$Comment l'interpréter ?
Que toutes les tables DMI ne sont pas encodées à l'identique !
C'est pourquoi un grep tel-mot peut fonctionner sur un pc et donner un retour vide sur un autre.
Que donne chez toi
sudo dmidecode | grep -iC 11 "Supported Speeds:"?
Sinon, le man contient plein d'astuces. Comme
sudo dmidecode -d /dev/memmais c'est très bavard ! (plus de 400 lignes, chez moi)
Ou encore
sudo dmidecode -t 19,20ou simplement :
sudo dmidecode -t memory%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne