#1 Le 28/11/2020, à 17:38
- ceric
[Résolu] DeskJet 2710 (Installation imprimante/scanner)
Bonjour,
Je me suis commandé la DeskJet 2710 sans avoir consulté le forum et puis je me suis dit au moment de l'achat : si c'est une HP c'est forcément reconnu.
J'avais une envy 5546 qui fonctionnait avec le driver 3.20.9 mais qui m'a lâché (écran de fonction tout noir).
Je ne l'ai pas encore reçu mais j'aurai quelques questions :
- Dois-je l'installer directement en suivant la procédure suivante avant de la laisser s'installer avec la version 3.20.3?
- Prendriez-vous l'installation avec interface graphique ou custom?
edit : j'ai migré vers la 20.10; bilan elle a de suite été reconnue y compris le scanner.
Dernière modification par ceric (Le 21/12/2020, à 20:12)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#2 Le 28/11/2020, à 17:42
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
cedric@cedric-System-Product-Name:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"cedric@cedric-System-Product-Name:~$ uname -i
x86_64cedric@cedric-System-Product-Name:~$ groups
cedric adm cdrom sudo dip plugdev lpadmin lxd sambasharecedric@cedric-System-Product-Name:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 006: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubMac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#3 Le 28/11/2020, à 18:13
- grigouille
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
C'est une imprimante récente. Il te faut hplip >= 3.20.5
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#4 Le 28/11/2020, à 18:32
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Bonjour grigouille, je me suis téléchargé la 3.20.5.
Puis-je l'installer suivant la procédure sans avoir reçu l'imprimante?
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#5 Le 28/11/2020, à 18:54
- grigouille
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Tu peux le faire mais j'attendrai d'avoir l'imprimante. Elle sera alors installée pendant la procédure.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#6 Le 28/11/2020, à 19:17
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Argh, je l'ai installé.
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#7 Le 28/11/2020, à 20:31
- grigouille
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Ce n'est pas grave.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#8 Le 28/11/2020, à 22:50
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Je viens à l'instant de faire une clean/fresh install de la distribution.
Donc je repars à zéro.
Je viendrai poster lorsque je serai en carafe ou que j'aurai réussi à installer cette 2710. 
edit : je vais suivre ce tuto dès que je la reçois.
Dernière modification par ceric (Le 29/11/2020, à 07:28)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#9 Le 29/11/2020, à 09:08
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
@grigouille, pencherais-tu plus vers une installation automatique ou custom?
Sachant que je ne souhaiterais pas non plus avoir toute cette usine à gaz HP.
edit : En relisant le tuto plus haut, j'avais la réponse.
Dernière modification par ceric (Le 29/11/2020, à 10:20)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#10 Le 29/11/2020, à 10:39
- grigouille
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Il semble qu'avec la 20.04, l'installation automatique ne fonctionne pas. Lis la doc hplip pour l'installation custom.
Autre solution : passez à Ubuntu 20.10.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#11 Le 29/11/2020, à 10:43
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Je crois que je vais garder ma 20.04.1 et tenter l'installation custom car je ne veux pas me lancer dans les migrations semestrielles.
edit : du coup cela fait quelques années que je ne veux plus tourner sur une non lts car j'achète du matos trop récent et là rebelote. 
Dernière modification par ceric (Le 30/11/2020, à 19:25)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#12 Le 30/11/2020, à 23:38
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Merci à grigouille. Sujet résolu.
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#13 Le 06/12/2020, à 23:28
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Finalement après LE bug de trop de firefox, j'ai reformaté ma bécane et remis la budgie 20.04.1. Et installé en mode custom la DeskJet.
Xsane ne fonctionne pas.
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#14 Le 06/12/2020, à 23:54
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Bonsoir,
J'ai reformaté mon pc sous la 20.04.1.
J'ai installé le pilote custom
cedric@cedric-System-Product-Name:~$ dpkg -l | grep hplip
rc hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data filescedric@cedric-System-Product-Name:~$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/cedric/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-56-generic #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 GNU/Linux
Host: cedric-System-Product-Name
Proc: 5.4.0-56-generic #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 GNU/Linux
Distribution: 12 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.11
html=/usr/share/doc/hplip-3.20.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=no
qt3=no
qt4=no
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1607287092
pending_upgrade_time = 0
[last_used]
device_uri = hp:/usb/DeskJet_2700_series?serial=CN08R4E6RS
[installation]
date_time = 12/06/20 22:53:23
version = 3.20.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 - MISSING 'python3-pyqt5-dbus needs to be installed'
error: python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 - MISSING 'python3-pyqt5 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.11 OK -
hpmudext IO-Extension REQUIRED - 3.20.11 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.11 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS' is a Hewlett-Packard DeskJet_2700_series all-in-one
device `hpaio:/net/deskjet_2700_series?ip=192.168.1.125&queue=false' is a Hewlett-Packard deskjet_2700_series all-in-one
device `escl:https://192.168.1.125:443' is a ESCL HP DeskJet 2700 series [D6DFFD] SSL flatbed scanner
device `escl:http://192.168.1.125:8080' is a ESCL HP DeskJet 2700 series [D6DFFD] flatbed scanner
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------------
hp:/usb/DeskJet_2700_series?seri HP DeskJet 2700 series
al=CN08R4E6RS
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: implicitclass://HP_DeskJet_2700_series_D6DFFD_/
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/001/008' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'python3-pyqt5' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.pyqt5' package is missing/incompatible
Total Errors: 2
Total Warnings: 0
Done.Dernière modification par ceric (Le 07/12/2020, à 13:41)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#15 Le 06/12/2020, à 23:57
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
cedric@cedric-System-Product-Name:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"cedric@cedric-System-Product-Name:~$ uname -i
x86_64cedric@cedric-System-Product-Name:~$ groups
cedric adm cdrom sudo dip plugdev lpadmin lxd sambasharecedric@cedric-System-Product-Name:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 008: ID 03f0:1853 HP, Inc DeskJet 2700 series
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 007: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 006: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubMac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#16 Le 07/12/2020, à 00:02
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
J'ai comme ces deux messages :
Avec Xsane : le scanner est reconnu, mais message d'erreur : erreur d'ouverture du périphérique hpaio:/usb/Deskjet_2700_series...
Avec Numeriseur de Documents 3.36.33 : échec de la numérisation impossible de se connecter au périphérique
Merci d'avance pour votre aide.
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#17 Le 07/12/2020, à 00:11
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Autre info:
cedric@cedric-System-Product-Name:~$ hp-scan
HP Linux Imaging and Printing System (ver. 3.20.11)
Scan Utility ver. 2.2
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
-----------------
| SELECT DEVICE |
-----------------
Num Scan device URI
-------- -----------------------------------------------------------
0 hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS
1 hpaio:/net/deskjet_2700_series?ip=192.168.1.125&queue=false
2 escl:https://192.168.1.125:443
3 escl:http://192.168.1.125:8080
Enter number 0...3 for device (q=quit) ?0
warning: No destinations specified. Adding 'file' destination by default.
Using device hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS
Opening connection to device...
error: SANE: Error during device I/O (code=9)Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#18 Le 07/12/2020, à 08:31
- grigouille
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Comme d'habitude :
Supprime l'imprimante :
hp-setup -irInstalle l'imprimante :
hp-setup -iaxDernière modification par grigouille (Le 07/12/2020, à 08:38)
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#19 Le 07/12/2020, à 10:01
- moko138
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
En #1, hier soir, tu montrais
J'ai reformaté mon pc sous la 20.04.1.
J'ai installé le pilote customcedric@cedric-System-Product-Name:~$ dpkg -l | grep hplip rc hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files
Ce retour indique que :
hplip-data est bien installé ("ii"), mais que
hplip n'est plus installé ; il n'en reste que des fichiers de configuration ("rc").
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 07/12/2020, à 13:44
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Je ne vais pas insister et vous faire perdre inutilement votre temps; ce soir, je migre à nouveau vers la gorilla.
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#21 Le 07/12/2020, à 13:46
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Je suis resté jusqu'à 1h30 pour me réinstaller une version propre de la focal. Je ne vous ferez pas perdre votre temps car je vais migrer après mon job vers la gorilla.
Merci pour vos différents posts.
Dernière modification par ceric (Le 07/12/2020, à 13:46)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#22 Le 12/12/2020, à 18:49
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Bonsoir,
J'ai un soucis avec mon imprimante.
Ci-dessous mes références
cedric@cedric-System-Product-Name:~$ cat /etc/lsb-release && uname -i && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.1 LTS"
x86_64
cedric adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 008: ID 03f0:1853 HP, Inc DeskJet 2700 series
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 007: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 006: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubedit: je craque je suis reparti à zéro : réinstallation de la 20.04.1.
Dernière modification par ceric (Le 12/12/2020, à 23:00)
Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#23 Le 12/12/2020, à 22:05
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
cedric@cedric-System-Product-Name:~$ dpkg -l | grep hplip
rc hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files
rc hplip-gui 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - GUI utilities (Qt-based)Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#24 Le 12/12/2020, à 22:07
- ceric
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
cedric@cedric-System-Product-Name:~$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/cedric/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Host: cedric-System-Product-Name
Proc: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Distribution: 12 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.11
html=/usr/share/doc/hplip-3.20.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=no
qt3=no
qt4=no
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 12/12/20 21:06:17
version = 3.20.11
[upgrade]
notify_upgrade = true
last_upgraded_time = 1607801321
pending_upgrade_time = 0
[last_used]
device_uri = hp:/usb/DeskJet_2700_series?serial=CN08R4E6RS
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.11 OK -
hpmudext IO-Extension REQUIRED - 3.20.11 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.11 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/DeskJet_2700_series?serial=CN08R4E6RS' is a Hewlett-Packard DeskJet_2700_series all-in-one
device `hpaio:/net/deskjet_2700_series?ip=192.168.1.125&queue=false' is a Hewlett-Packard deskjet_2700_series all-in-one
device `escl:https://192.168.1.125:443' is a ESCL HP DeskJet 2700 series [D6DFFD] SSL flatbed scanner
device `escl:http://192.168.1.125:8080' is a ESCL HP DeskJet 2700 series [D6DFFD] flatbed scanner
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------------
hp:/usb/DeskJet_2700_series?seri HP DeskJet 2700 series
al=CN08R4E6RS
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: implicitclass://HP_DeskJet_2700_series_D6DFFD_/
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/001/008' Perm:' root lp rw- rw- rw- rw- r--'
No errors or warnings.
Done.Mac mini 7,1 en dual boot Ubuntu Gnome 22.04.5 [LTS] & macOS (Monterey)
HP elitedesk 800 G2 SFF en single boot Ubuntu Gnome 24.04.1 [LTS]
HP zBook G3 15" en single boot Gnome Mageia 9
Hors ligne
#25 Le 12/12/2020, à 22:11
- xubu1957
Re : [Résolu] DeskJet 2710 (Installation imprimante/scanner)
Bonjour,
Comme d'habitude :
Supprime l'imprimante :hp-setup -irInstalle l'imprimante :
hp-setup -iax
Dernière modification par xubu1957 (Le 19/01/2022, à 20:31)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne