#1 Le 30/04/2013, à 22:32
- zosk
message d'erreur ELF header smaller than expected
Bonsoir,
Je viens de lancer l'installation de ubuntu 12.04 sur un ordinateur portable packard bell EasyNote LE et lors du redémarrage juste après l'installation, je me retrouver avec un écran noir et le message d'erreur suivant :
error : ELF header smaller than expected.
grub rescue>
Je n'ai pas pu non plus me connecter au wifi lors de l'installation.
Si quelqu'un peut m'aider ça serait super. J'ai cherché sur le site mais j'ai rien trouvé qui pouvait m'aider.
Merci à l'avance
Hors ligne
#2 Le 01/05/2013, à 07:28
- malbo
Re : message d'erreur ELF header smaller than expected
Peux-tu répondre à cette demande : http://doc.ubuntu-fr.org/tutoriel/boot-info
Peux-tu préciser le nom complet de ton modèle d'ordi (genre : EasyNote LE11-BZ-005FR) ?
Dernière modification par malbo (Le 01/05/2013, à 07:31)
Hors ligne
#3 Le 01/05/2013, à 09:08
- zosk
Re : message d'erreur ELF header smaller than expected
Je n'arrive plus à démarrer l'ordi que ça soit normal ou avec une liveUSB Ubuntu.
J'ai tout de suite l'écran noir avec l'information d'erreur.
Modèle de l'ordi : Packard Bell Easynote LE11BZ-11204G50Mnks
Je peux accéder au BIOS, mais c'est tout.
J'ai lancer l'installation de linux par une liveUSB
Hors ligne
#4 Le 01/05/2013, à 09:16
- malbo
Re : message d'erreur ELF header smaller than expected
Je n'arrive plus à démarrer l'ordi que ça soit normal ou avec une liveUSB Ubuntu.
Tu n'arrives plus à démarrer sur une liveUSB mais cependant tu dis un peu plus bas que tu as installé avec une liveUSB. C'est un peu dur à comprendre. S'agit-il de la même liveUSB dans les deux cas ? Si oui, je te suggère d'appliquer l'astuce suivante : connecter seulement la liveUSB au démarrage de l'ordi moins d'une seconde après que tu as appuyé sur le bouton Marche de l'ordi. Cela permet de forcer l'ordi à détecter la liveUSB mais ce n'est pas suffisant : il faut que tu ailles dans le "Boot menu" (voir nota) de ton ordi pour sélectionner la liveUSB sinon cette andouille démarre comme d'hab sur le disque dur et tu te retrouves encore avec le message d'erreur "ELF header...."
nota : pour activer le Boot-Menu, je crois qu'il faut que tu ailles dans ton Bios au démarrage (appui sur la touche F2 au démarrage) et que tu actives la touche F12 pour qu'elle autorise le Boot-menu. C'est très pratique un Boot-Menu parce que ça permet de sélectionner à la volée un lecteur de démarrage (le disque dur, une liveUSB, un liveDVD) quelque soit le lecteur qui est défini en priorité de démarrage dans le Bios.
Dernière modification par malbo (Le 01/05/2013, à 09:35)
Hors ligne
#5 Le 01/05/2013, à 09:30
- zosk
Re : message d'erreur ELF header smaller than expected
Merci pour ta réponse, ça a fonctionné.
Je vais relancer l'installation et voir ce qu'il se passe.
J'avais installé ubuntu avec la liveUSB tout avait bien fonctionné, c'est lors du redémarrage que ça m'a fait cette erreur et depuis plus rien.
Hors ligne
#6 Le 01/05/2013, à 09:36
- malbo
Re : message d'erreur ELF header smaller than expected
J'ai complété mon post entre temps. Essaie d'activer le Boot-Menu par la touche F12 : c'est vraiment très pratique. Ce n'est pas indispensable de refaire l'installation complète : tu aurais dû seulement purger et réinstaller Grub avec Boot-Repair et ça aurait suffit.
Dernière modification par malbo (Le 01/05/2013, à 09:38)
Hors ligne
#7 Le 01/05/2013, à 10:06
- zosk
Re : message d'erreur ELF header smaller than expected
Je n'ai pas encore relancé l'installation, je vais donc pouvoir faire comme tu m'as indiqué.
Je vais faire ça tout à l'heure et je redonne des nouvelles.
Merci encore
Dernière modification par zosk (Le 01/05/2013, à 10:16)
Hors ligne
#8 Le 01/05/2013, à 11:57
- zosk
Re : message d'erreur ELF header smaller than expected
C'est bon ça fonctionne maintenant, idem pour la connection.
En tout cas merci, vraiment merci beaucoup.
Hors ligne
#9 Le 01/05/2013, à 13:40
- malbo
Re : message d'erreur ELF header smaller than expected
Peux-tu poster ton Boot-Info : http://doc.ubuntu-fr.org/tutoriel/boot-info
afin que ça serve d'exemple à ceux qui ont le même modèle d'ordi que toi.
Pour profiter du fait que tu as réussi à faire fonctionner ton Ubuntu installé, je te propose de faire ce Boot-Info depuis ta session normale de Ubuntu (au lieu de le faire depuis une session live comme préconisé à l'étape 1)
Dernière modification par malbo (Le 01/05/2013, à 13:41)
Hors ligne
#10 Le 01/05/2013, à 21:18
- zosk
Re : message d'erreur ELF header smaller than expected
Oui je m'en occupe demain ou vendredi.
Encore merci pour tout.
Hors ligne
#11 Le 02/05/2013, à 14:46
- zosk
Re : message d'erreur ELF header smaller than expected
Voici mon Boot-info : http://paste.ubuntu.com/5625749/
Merci encore ....
Hors ligne
#12 Le 21/01/2016, à 08:28
- malbo
Re : message d'erreur ELF header smaller than expected
J'avais oublié de coller le Boot-Info (presque 3 ans de retard...) :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 31Jan2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 97,656,831 97,654,784 83 Linux
/dev/sda2 97,658,878 976,771,071 879,112,194 5 Extended
/dev/sda5 97,658,880 105,469,951 7,811,072 82 Linux swap / Solaris
/dev/sda6 105,472,000 976,771,071 871,299,072 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 ccdc7e49-e669-4e71-a33b-03d51fde0c4c ext4
/dev/sda5 2ec5b2ee-05bb-4264-a716-0be57b683a9f swap
/dev/sda6 33efea6f-3ac6-4e68-8c96-f6938ea8f758 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda6 /home ext4 (rw)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
linux /boot/vmlinuz-3.2.0-41-generic root=UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-41-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-41-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
echo 'Chargement de Linux 3.2.0-41-generic…'
linux /boot/vmlinuz-3.2.0-41-generic root=UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.2.0-41-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-29-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
echo 'Chargement de Linux 3.2.0-29-generic…'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.2.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ccdc7e49-e669-4e71-a33b-03d51fde0c4c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=33efea6f-3ac6-4e68-8c96-f6938ea8f758 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=2ec5b2ee-05bb-4264-a716-0be57b683a9f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.411746979 = 26.211913728 boot/grub/grub.cfg 1
24.413845062 = 26.214166528 boot/grub/core.img 1
28.229217529 = 30.310891520 boot/vmlinuz-3.2.0-29-generic 1
1.657955170 = 1.780215808 boot/vmlinuz-3.2.0-41-generic 1
1.657955170 = 1.780215808 vmlinuz 1
28.229217529 = 30.310891520 vmlinuz.old 1
2.274414062 = 2.442133504 boot/initrd.img-3.2.0-29-generic 2
0.274185181 = 0.294404096 boot/initrd.img-3.2.0-41-generic 2
0.274185181 = 0.294404096 initrd.img 2
2.274414062 = 2.442133504 initrd.img.old 2
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-05-02__14h39 ===================
boot-repair version : 3.198~ppa13~precise
boot-sav version : 3.198~ppa13~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.198~ppa13~precise
boot-repair is executed in installed-session (Ubuntu 12.04.2 LTS, precise, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic root=UUID=ccdc7e49-e669-4e71-a33b-03d51fde0c4c ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 12.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="ccdc7e49-e669-4e71-a33b-03d51fde0c4c" TYPE="ext4"
/dev/sda5: UUID="2ec5b2ee-05bb-4264-a716-0be57b683a9f" TYPE="swap"
/dev/sda6: UUID="33efea6f-3ac6-4e68-8c96-f6938ea8f758" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne débute pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 mai 2 11:21 grub.d
total 60
-rwxr-xr-x 1 root root 6743 janv. 22 20:18 00_header
-rwxr-xr-x 1 root root 5522 mai 17 2012 05_debian_theme
-rwxr-xr-x 1 root root 7780 janv. 22 20:18 10_linux
-rwxr-xr-x 1 root root 6335 mai 17 2012 20_linux_xen
-rwxr-xr-x 1 root root 1588 nov. 27 2011 20_memtest86+
-rwxr-xr-x 1 root root 7603 mai 17 2012 30_os-prober
-rwxr-xr-x 1 root root 1388 janv. 22 20:18 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 17 2012 40_custom
-rwxr-xr-x 1 root root 95 mai 17 2012 41_custom
-rw-r--r-- 1 root root 483 mai 17 2012 README
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 00000000dfbfc000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda6 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST9500325AS (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 50.0GB 50.0GB primary ext4 boot
2 50.0GB 500GB 450GB extended
5 50.0GB 54.0GB 3999MB logical linux-swap(v1)
6 54.0GB 500GB 446GB logical ext4
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA ST9500325AS;
1:1049kB:50.0GB:50.0GB:ext4::boot;
2:50.0GB:500GB:450GB:::;
5:50.0GB:54.0GB:3999MB:linux-swap(v1)::;
6:54.0GB:500GB:446GB:ext4::;
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/sda6 on /home type ext4 (rw)
gvfs-fuse-daemon on /home/milo/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=milo)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 usbmon5 usbmon6 usbmon7 v4l vga_arbiter video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 46G 4.4G 40G 10% /
udev devtmpfs 1.8G 12K 1.8G 1% /dev
tmpfs tmpfs 706M 864K 705M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.8G 96K 1.8G 1% /run/shm
/dev/sda6 ext4 409G 273M 388G 1% /home
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000f3b9
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 97656831 48827392 83 Linux
/dev/sda2 97658878 976771071 439556097 5 Extended
/dev/sda5 97658880 105469951 3905536 82 Linux swap / Solaris
/dev/sda6 105472000 976771071 435649536 83 Linux
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
C'est bien une installation en mode Bios (non-EFI) de Ubuntu 12.04 64 bits.
Les caractéristiques du Packard Bell Easy Note LE11BZ-11204G50Mnks sont visibles sur cette page (*). Il est équipé d'un processeur AMD E1-1200. Le processeur graphique AMD Radeon HD 7310 est intégré sur la même puce que le processeur.
Je viens d'ajouter ce modèle dans la Liste des portables « Packard Bell »
(*) j'ai rectifié le lien qui était nase le 5 janv 2020
Dernière modification par malbo (Le 05/01/2020, à 08:11)
Hors ligne