Pages : 1
#1 Le 01/08/2014, à 21:13
- MiniTux90
[Résolu] Installation sur Asus N56VJ
Bonsoir tout le monde ! Je possède actuellement un pc portable Asus N56VJ qui tourne sous Windows 7 64, mais par soucis de rapidité notamment, j'aimerais faire un dual boot avec Ubuntu. Jusque la, pas de soucis pour moi, mais je me posais quelques questions :
-Sachant que je voudrais utiliser exclusivement le gpu intel, sauf de très rares occasions ou la carte Nvidia sera sollicitée, Prime semble-t-il une bonne solution ?
-Quel environnement et quels logiciels me conseillerez-vous pour avoir un système fluide, pratique et sans trop d'accès disque ? (Le disque dur est le point faible du PC)
-Enfin, si quelqu'un possède un Asus N56 ou N76 sous Ubuntu ou dérivés, pourrrait-t-il me dire si le système fonctionne bien dessus ?
Merci d'avance pour toutes vos réponses qui je pense m'aideront beaucoup
Bonne soirée à tous !
Dernière modification par MiniTux90 (Le 09/08/2014, à 20:47)
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#2 Le 01/08/2014, à 22:24
- michel_04
Re : [Résolu] Installation sur Asus N56VJ
-Enfin, si quelqu'un possède un Asus N56 ou N76 sous Ubuntu ou dérivés, pourrrait-t-il me dire si le système fonctionne bien dessus ?
À priori, oui. voir http://doc.ubuntu-fr.org/liste_portables_asus#n
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#3 Le 02/08/2014, à 07:04
- malbo
Re : [Résolu] Installation sur Asus N56VJ
Je possède actuellement un pc portable Asus N56VJ qui tourne sous Windows 7 64
Il faut vérifier si Windows 7 est installé en mode EFI ou en mode Bios (non-EFI) afin d'installer Ubuntu dans le même mode que Windows 7. Les explications sont dans ce tuto : http://forum.ubuntu-fr.org/viewtopic.php?id=986671
Il y est indiqué la façon de déterminer le mode d'installation EFI ou non pour Windows 7 : c'est la méthode exposée dans ce doc de Tsintao : http://forum.ubuntu-fr.org/viewtopic.ph … 1#p9714181
Hors ligne
#4 Le 03/08/2014, à 20:57
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Pas de soucis pour ça, le pc était sous 8 et je l'ai passé sous 7 en mode BIOS, je pense que ca sera plus simple ainsi
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#5 Le 04/08/2014, à 07:10
- malbo
Re : [Résolu] Installation sur Asus N56VJ
Il faudra donc installer Ubuntu en mode Bios (non-EFI) et pour ce faire il conviendra de démarrer l'ordi sur ton support live (liveDVD ou liveUSB) de Ubuntu en mode non-EFI. Le moyen de bien identifier le mode est présenté dans 2.5 Identifier si l'ordinateur démarre sur le CD (ou la live USB) en mode EFI. Par conséquent, il faudra que tu vois cet écran pour être sûr de démarrer en mode non-EFI et à partir de là, tu pourras lancer ton installation.
Dernière modification par malbo (Le 04/08/2014, à 07:13)
Hors ligne
#6 Le 08/08/2014, à 20:45
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Bonsoir ! Comme j'installe via une clé usb créée avec LinuxLive USB creator, je ne vois pas cette fameuse image, et je me retrouve confronté à un autre soucis : l'installateur voit mon disque dur comme étant vide ! Or, j'ai 500gb d'alloué à Windows 7 et j'aimerais bien conserver mes données, que faire ? Merci d'avance car la je suis perdu
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#7 Le 09/08/2014, à 05:27
- malbo
Re : [Résolu] Installation sur Asus N56VJ
Je te prie de réaliser un Boot-Info en suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Tu posteras l'URL du Boot-Info dans ta réponse. Je pourrai tenter de comprendre ce qui se passe en étudiant ce Boot-Info.
Hors ligne
#8 Le 09/08/2014, à 15:43
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Hello, je viens aux nouvelles ! Hier soir j'ai sauvegardé toutes mes données et tenté plusieurs choses : réinstallation de Windows 7 puis Ubuntu -> pas de changement
Ubuntu puis Windows 7 -> L'installateur refuse d'installer sur une table de partition GPT (alors que Ubuntu a été booté en mode non-EFI)
Du coup, la je réinstalle Windows 7 sur une partition de 640go, en laissant 70go de libres pour Ubuntu. Suite à cette installation, je réaliserai la procédure de malbo et vous posterai le résultat. Merci de votre aide !
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#9 Le 09/08/2014, à 16:08
- Korak
Re : [Résolu] Installation sur Asus N56VJ
Bonjour,
L'installateur refuse d'installer sur une table de partition GPT (alors que Ubuntu a été booté en mode non-EFI)
Si tu as une table de partition GPT, c'est que ton BIOS est en mode EFI/UEFI.
Donc, il faut installer Windows et Ubuntu en mode EFI/UEFI.
OS: Ubuntu 24.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#10 Le 09/08/2014, à 16:25
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Justement, à ce propos, l'utilitaire de disque d'Ubuntu voit bien ma partition Windows, me signale que je suis en GPT, mais n'est pas capable de formater le disque. Et l'installateur ne voit toujours rien
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#11 Le 09/08/2014, à 16:29
- Korak
Re : [Résolu] Installation sur Asus N56VJ
Pour un dualboot Windows/Ubuntu, il ne faut pas formater le disque-dur. Sinon, tu perds tout. Windows y compris.
Et l'installeur d'Ubuntu est mal foutu, il ne voit pas Windows. Il faut passer par "Autre chose" quand l'installeur te demande ce qu'il faut faire.
OS: Ubuntu 24.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#12 Le 09/08/2014, à 16:34
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
C'est justement quand je passe par "autre chose" que je ne vois pas ma partition Windows ^^ il me dit donc que j'ai un espace non alloué de 750go (taille de mon DD). Et sinon pour ce qui est d'un dual-boot Windows Ubuntu je n'en suis pas à mon coup d'essai, mais la c'est la première fois que je me retrouve confronté à un soucis de ce genre. Pour malbo, voici le Boot-info créé en live USB avec Ubuntu 14.04 : http://paste.ubuntu.com/7998933/
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#13 Le 09/08/2014, à 16:38
- Korak
Re : [Résolu] Installation sur Asus N56VJ
As-tu réduit la partition de Windows pour avoir un espace libre?
Espace libre veut dire: pas de partition à cet endroit.
OS: Ubuntu 24.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#14 Le 09/08/2014, à 17:02
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Comme dit précédemment, j'ai, laissé 70Go d'espace disque libre (donc bien sans aucune partition) pour l'installation d'Ubuntu. Cet espace est visible dans l'utilitaire de disque de Ubuntu, mais non modifiable. Je pense qu'il y a un conflit entre le MBR de Windows 7 et Ubuntu qui voit mon disque comme étant en GPT
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#15 Le 09/08/2014, à 17:50
- malbo
Re : [Résolu] Installation sur Asus N56VJ
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1981344 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,321,166,847 1,321,164,800 7 NTFS / exFAT / HPFS
GUID Partition Table detected, but does not seem to be used.
Partition Start Sector End Sector # of Sectors System
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 2000 MB, 2000570368 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3907364 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 3,907,363 3,907,301 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 ACF8D8F4F8D8BDB0 ntfs
/dev/sdb1 02A5-C30D vfat MYLINUXLIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-wDR1zVHk/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-wDR1zVHk/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4741/mounts) leaked on lvscan invocation. Parent PID 10072: bash
File descriptor 63 (pipe:[45397]) leaked on lvscan invocation. Parent PID 10072: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-09__14h30 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="ACF8D8F4F8D8BDB0" TYPE="ntfs"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="02A5-C30D" TYPE="vfat"
1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: Kingston DataTraveler G2 (scsi)
Disk /dev/sdb: 2001MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 2001MB 2001MB primary fat32 boot
=================== parted -lm:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA Hitachi HTS72757;
BYT;
/dev/sdb:2001MB:scsi:512:512:msdos:Kingston DataTraveler G2;
1:32.3kB:2001MB:2001MB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 5f bf 4e 00 00 00 00 |........._.N....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b0 bd d8 f8 f4 d8 f8 ac |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 120M 1.6G 8% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 340M 1.1M 339M 1% /run
/dev/sdb1 vfat 1.9G 1.2G 738M 62% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 1.2M 1.7G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 76K 1.7G 1% /run/shm
none tmpfs 100M 76K 100M 1% /run/user
/dev/sda1 fuseblk 630G 14G 617G 3% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd4341003
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1321166847 660582400 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 2000 MB, 2000570368 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3907364 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00061169
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 3907363 1953650+ b W95 FAT32
No OS or WinEFI system
=================== Default settings
Recommended-Repair
This setting would not act on the MBR.
Additional repair would be performed: repair-filesystems
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
L'anomalie se trouve dans cette partie :
=================== parted -l:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
C'est ce qu'il y a exactement là qui est important :
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
Cela veut dire qu'initialement, la table de partition du disque dur était GPT mais que cette table de partition a été mal transformée en MSDOS ce qui fait qu'il reste des traces de l'ancien partitionnement GPT. C'est ça qui bloque.
Dans cette discussion : http://forum.ubuntu-fr.org/viewtopic.ph … #p13216561
Le même symptôme que toi. La solution est indiquée au post #9 de la discussion
Hors ligne
#16 Le 09/08/2014, à 18:37
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Ca marche ! Avec la solution proposée au post que malbo m'a envoyé, j'ai réussi à faire le dual boot
Mille merci, ca change d'avoir la rapidité d'Ubuntu et de pouvoir garder Windows 7 pour quelques jeux. Merci encore, et bonne fin de journée à vous
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#17 Le 09/08/2014, à 18:59
- malbo
Re : [Résolu] Installation sur Asus N56VJ
Je te prie de modifier le titre de ton premier message pour qu'il devienne :
[Résolu] Installation sur Asus N56VJ
Hors ligne
#18 Le 09/08/2014, à 20:46
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Oui je n'y avais pas encore pensé désolé
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#19 Le 10/08/2014, à 05:10
- malbo
Re : [Résolu] Installation sur Asus N56VJ
MiniTux90,
Sur la base du descriptif que je vois dans ta signature pour ton ordi Asus N56VJ, j'ai trouvé ce modèle ASUS N56VJ-S3005H visible ici
Pourrais-tu confirmer qu'il s'agit de ce modèle ? Si ce n'est pas ça, peux-tu préciser le nom complet du modèle car je voudrais l'ajouter dans la Liste des portables « Asus »
Peux-tu confirmer (ou pas) que Windows 8 était préinstallé dans cet ordi ? Je pose cette question parce que j'ai l'impression que le pb que tu as rencontré, ça se passe quasiment tout le temps avec les ordis qui étaient préinstallés Windows 8. Je n'en suis pas sûr mais je pense que ça se produit quand on cherche à remplacer Windows 8 préinstallé par Windows 7 (les modalités pratiques qui font que l'accident se produit, je ne les connais pas mais c'est le contexte général)
Dernière modification par malbo (Le 10/08/2014, à 05:19)
Hors ligne
#20 Le 14/08/2014, à 22:12
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Bonsoir. Oui, c'est bien le N56VJ-S3005H que je possède, et il était préinstallé avec Windows 8 64bits, que j'avais remplacé par Windows 7 uniquement. Si cela peut t'aider, aucun soucis depuis l'installation, Prime marche super bien, il y a juste la batterie qui se décharge plus vite que sous Windows 7. Bonne soirée et n'hésite pas si tu as besoin de plus d'infos
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#21 Le 14/08/2014, à 22:17
- Korak
Re : [Résolu] Installation sur Asus N56VJ
Redonne un rapport de Boot Info depuis ton Ubuntu installé, juste pour voir ce qu'il raconte.
Surtout, ne fais pas de réparation, juste le rapport.
OS: Ubuntu 24.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#22 Le 17/08/2014, à 16:09
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Je fais ça dès que possible et je vais par la même ouvrir un nouveau topic puisque j'ai le droit à des plantages du serveur X, et ce de manière aléatoire. Enfin bref, je poste ça avant de partir du forum pour quelque temps
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#23 Le 18/08/2014, à 14:29
- MiniTux90
Re : [Résolu] Installation sur Asus N56VJ
Bonjour bonjour ! Je suis à l'hopital donc je ne peux vous écrire que très rapidemment (merci le wi-fi pour patients ^^), et je vous donne donc les 600 lignes de mon rapport boot-info, bonne chance pour la lecture
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,321,166,847 1,321,164,800 7 NTFS / exFAT / HPFS
/dev/sda2 1,321,168,894 1,465,147,391 143,978,498 5 Extended
/dev/sda5 1,458,915,328 1,465,147,391 6,232,064 82 Linux swap / Solaris
/dev/sda6 1,321,168,896 1,458,915,327 137,746,432 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 ACF8D8F4F8D8BDB0 ntfs
/dev/sda5 b8783027-892e-4419-8142-a44530d8bf8c swap
/dev/sda6 de18ccb3-b4e6-4421-b760-101e8b329e86 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/michael/ACF8D8F4F8D8BDB0 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda6 / ext4 (rw,errors=remount-ro)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-34-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 de18ccb3-b4e6-4421-b760-101e8b329e86
else
search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-ACF8D8F4F8D8BDB0' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 ACF8D8F4F8D8BDB0
else
search --no-floppy --fs-uuid --set=root ACF8D8F4F8D8BDB0
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=b8783027-892e-4419-8142-a44530d8bf8c none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-ZDxDTy7q/Tmp_Log: No such file or directory
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-18__14h25 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash
=================== os-prober:
/dev/sda6:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/sda1: UUID="ACF8D8F4F8D8BDB0" TYPE="ntfs"
/dev/sda5: UUID="b8783027-892e-4419-8142-a44530d8bf8c" TYPE="swap"
/dev/sda6: UUID="de18ccb3-b4e6-4421-b760-101e8b329e86" TYPE="ext4"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 9 18:57 grub.d
total 76
-rwxr-xr-x 1 root root 9424 avril 11 12:51 00_header
-rwxr-xr-x 1 root root 6058 avril 10 17:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 12:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 12:51 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 13:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 12:51 30_os-prober
-rwxr-xr-x 1 root root 1416 avril 11 12:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 11 12:51 40_custom
-rwxr-xr-x 1 root root 216 avril 11 12:51 41_custom
-rw-r--r-- 1 root root 483 avril 11 12:51 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/michael/ACF8D8F4F8D8BDB0.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 676GB 676GB primary ntfs boot
2 676GB 750GB 73.7GB extended
6 676GB 747GB 70.5GB logical ext4
5 747GB 750GB 3191MB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA Hitachi HTS72757;
1:1049kB:676GB:676GB:ntfs::boot;
2:676GB:750GB:73.7GB:::;
6:676GB:747GB:70.5GB:ext4::;
5:747GB:750GB:3191MB:linux-swap(v1)::;
=================== mount:
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=michael)
gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
/dev/sda1 on /media/michael/ACF8D8F4F8D8BDB0 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 5f bf 4e 00 00 00 00 |........._.N....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b0 bd d8 f8 f4 d8 f8 ac |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda6 ext4 65G 12G 50G 20% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 340M 1.1M 339M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 17M 1.7G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 fuseblk 630G 71G 560G 12% /media/michael/ACF8D8F4F8D8BDB0
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd4341003
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1321166847 660582400 7 HPFS/NTFS/exFAT
/dev/sda2 1321168894 1465147391 71989249 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 1458915328 1465147391 3116032 82 Linux swap / Solaris
/dev/sda6 1321168896 1458915327 68873216 83 Linux
Partition table entries are not in disk order
=================== Final advice in case of recommended repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
A bientôt !
Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64
Hors ligne
#24 Le 18/08/2014, à 15:11
- malbo
Re : [Résolu] Installation sur Asus N56VJ
C'est parfait ton dual-boot. Il n'y a plus de trace de GPT.
EDIT : je viens d'ajouter le modèle N56VJ-S3005H dans la Liste des portables « Asus »
Merci pour l'info
Dernière modification par malbo (Le 18/08/2014, à 15:27)
Hors ligne
Pages : 1