Pages : 1
#1 Le 20/06/2015, à 18:04
- louisoquinn
No bootable device
Bonjour à tous,
Après avoir discuté d'Ubuntu et de l'OpenSource en général à un ami, il m'a demandé de lui installer Ubuntu sur son ordi portable Packard Bell EasyNote ENTG71BM. Il était convaincu, ne voulait plus de Windows. J'ai choisi de lui installer Xubuntu, plus léger pour son ordi. J'ai donc booté sur une clé, installé Xubuntu, tout se passe bien.
Puis à la fin de l'installation, je redémarre et là : "No bootable device"
Dans le BIOS, le HDD est bel et bien reconnu... J'ai essayé de changer divers paramètres comme UEFI/Legacy, et j'ai chargé les paramètres par défaut, mais rien n'y fait. J'ai également effectué Boot-repair-disk avec donc une réinstallation de Grub; mais encore une fois c'est un échec. J'ai épuisé mes idées, je ne suis qu'un amateur et je vous avoue être bloqué.
Que dois-je faire ? J'ai pas envie de lui repayer un pc
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#2 Le 20/06/2015, à 18:10
- louisoquinn
Re : No bootable device
En parcourant le forum, j'ai vu un topic similaire : j'ai effectué ALT+F10 et j'ai réussi à rentrer dans Xubuntu, rapidement, il fonctionne nickel.
Je vais donc devoir appuyer sur ALT+F10 à chaque démarrage ? :'(
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#3 Le 21/06/2015, à 10:10
- malbo
Re : No bootable device
Peux-tu donner le lien vers le fameux "topic similaire" ? D'autre part, au lieu d'effectuer ALT+F10, peux-tu effectuer F10 seulement pour vérifier si ça donne le même résultat ou pas ?
Hors ligne
#4 Le 21/06/2015, à 13:54
- louisoquinn
Re : No bootable device
le topic : https://forum.ubuntu-fr.org/viewtopic.php?id=1788831
J'essaie F10 de suite :-)
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#5 Le 21/06/2015, à 13:56
- louisoquinn
Re : No bootable device
Cela ne fonctionne pas..
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#6 Le 21/06/2015, à 14:28
- malbo
Re : No bootable device
Hors ligne
#7 Le 23/06/2015, à 13:37
- louisoquinn
Re : No bootable device
Oui voilà c'est tout à fait ça. Mettre à jour le BIOS ne résoudra pas le problème n'est-ce pas ?
Par ailleurs, quand j'ai lancé l'installation de Xubuntu, lors du choix de l'installation, il ne détectait pas Windows mais justement cette fameuse partition de récupération. Ca donnait qqch du genre "installer Ubuntu à coté de "win recovery" (j'ai inventé le nom, je ne me souviens pas). Enfin voilà j'avais choisi "supprimer le disque et installer Ubuntu"
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#8 Le 23/06/2015, à 14:06
- malbo
Re : No bootable device
Je n'aime pas répondre à l'aveuglette. Je te prie de démarrer une session sur ton Xubuntu installé (en passant par ALT+F10) et depuis cette session, de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#9 Le 23/06/2015, à 23:25
- louisoquinn
Re : No bootable device
http://paste.ubuntu.com/11764526/
et voici le lien. Merci pour votre aide
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#10 Le 24/06/2015, à 06:02
- malbo
Re : No bootable device
Le Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 15.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 968,624,127 967,573,504 Data partition (Linux)
/dev/sda3 968,624,128 976,771,071 8,146,944 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 8AD3-95A3 vfat
/dev/sda2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ext4
/dev/sda3 adb0571f-fcf9-4fb8-909a-eeed4818d441 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 23 23:08 ata-MATSHITA_DVD-RAM_UJ8HC_KO0080702044521919E5 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Jun 23 23:22 wwn-0x15897281494750613504x -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
linux /boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-21-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
menuentry 'Ubuntu, with Linux 3.19.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-21-generic ...'
linux /boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-21-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-init-upstart-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-21-generic ...'
linux /boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-21-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-recovery-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-21-generic ...'
linux /boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-21-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-15-generic ...'
linux /boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-15-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-init-upstart-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-15-generic ...'
linux /boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-recovery-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
echo 'Loading Linux 3.19.0-15-generic ...'
linux /boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-15-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 8AD3-95A3
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=8AD3-95A3 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=adb0571f-fcf9-4fb8-909a-eeed4818d441 none swap sw 0 0
UUID=8AD3-95A3 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-06-23__23h22 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 15.04, vivid, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/disk/by-uuid/984e4bb1-bf2d-4c9e-8c63-eac430a998b7:L'OS actuellement utilisé - Ubuntu 15.04 CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="8AD3-95A3" TYPE="vfat" PARTUUID="fb5f1969-d288-4094-a776-e994610d6988"
/dev/sda2: UUID="984e4bb1-bf2d-4c9e-8c63-eac430a998b7" TYPE="ext4" PARTUUID="8ff41ff9-9bd0-47e9-8a56-90840a81f366"
/dev/sda3: UUID="adb0571f-fcf9-4fb8-909a-eeed4818d441" TYPE="swap" PARTUUID="1e9cc75b-44c4-4ad2-911a-7c83089d298a"
disk/by-uuid/984e4bb1-bf2d-4c9e-8c63-eac430a998b7 (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Linux not detected by os-prober on sda2. Veuillez indiquer ce message à boot.repair@gmail.com
=================== //etc/grub.d/ :
drwxr-xr-x 3 root root 4096 juin 21 05:30 grub.d
total 84
-rwxr-xr-x 1 root root 6058 févr. 11 20:53 05_debian_theme
-rwxr-xr-x 1 root root 11082 avril 6 22:43 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 6 17:23 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 6 22:43 30_os-prober
-rwxr-xr-x 1 root root 170 juin 20 17:54 40_custom
-rwxr-xr-x 1 root root 1416 avril 6 22:43 50_uefi-firmware
-rwxr-xr-x 1 root root 9424 avril 6 22:43 DS_00_header
-rwxr-xr-x 1 root root 12261 avril 6 22:43 DS_10_linux
-rwxr-xr-x 1 root root 214 avril 6 22:43 DS_40_custom
-rwxr-xr-x 1 root root 216 avril 6 22:43 DS_41_custom
drwxr-xr-x 2 root root 4096 juin 21 05:30 proxifiedScripts
-rw-r--r-- 1 root root 483 avril 6 22:43 README
=================== //etc/grub.d/40_custom :
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 8AD3-95A3
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
=================== //etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="Ubuntu"
GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_SAVEDEFAULT="false"
GRUB_DISABLE_OS_PROBER="true"
/boot/efi detected in the fstab of sda2: UUID=8AD3-95A3 (sda1)
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
No BootOrder is set; firmware will attempt recovery
Boot0000* Unknown Device: HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, customized, farbios, /.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST500LT012-1DG14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot, esp
2 538MB 496GB 495GB ext4
3 496GB 500GB 4171MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500LT012-1DG14:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:496GB:495GB:ext4::;
3:496GB:500GB:4171MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 465,8G ST500LT012-1DG14
sda1 part vfat 512M 8AD3-95A3
sda2 part ext4 461,4G 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
sda3 part swap 3,9G adb0571f-fcf9-4fb8-909a-eeed4818d441
sr0 rom 1024M DVD-RAM UJ8HC
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /boot/efi
sda2 1 0 0 /
sda3 1 0 0 [SWAP]
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=1952192k,nr_inodes=488048,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=392664k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=392664k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 xconsole zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 a3 95 d3 8a 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 384M 6.0M 378M 2% /run
/dev/sda2 ext4 455G 5.3G 426G 2% /
tmpfs tmpfs 1.9G 18M 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
tmpfs tmpfs 384M 40K 384M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 36F56BC1-B3F3-4ED7-BCED-4B559B7C4BFE
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 968624127 967573504 461.4G Linux filesystem
/dev/sda3 968624128 976771071 8146944 3.9G Linux swap
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub fix customized files) and reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [Linux] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
L'extrait qui montre le paramétrage du "Bios" (en fait, c'est l'UEFI) est là :
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
No BootOrder is set; firmware will attempt recovery
Boot0000* Unknown Device: HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
On y voit que Xubuntu est démarré en passant par une entrée nommée "Unknown Device" (comme dans le cas d'oceaneC en bas de ce post).
La ligne "No BootOrder is set; firmware will attempt recovery" signifie que le réglage de la priorité de démarrage a été effacé. J'ai trouvé ça en analysant ce rapport de Bug #1460781 dans lequel on peut voir que la commande "sudo efibootmgr -O" produit ce même résultat : "No BootOrder is set; firmware will attempt recovery". Et ce doc révèle que la commande "sudo efibootmgr -O" sert bien à effacer l'ordre de démarrage. Je ne dis pas du tout qu'il faut utiliser cette commande dans ce cas, j'essaie seulement d'analyser ce que je vois.
Je me dégonfle de te proposer de modifier quelque chose là-dedans. Quant à mettre à jour le Bios, je te déconseille aussi. Ton ami devra utiliser ALT+F10.
EDIT : je souhaiterais ajouter ce modèle d'ordi dans la Liste des portables « Packard Bell » mais je constate en faisant mes recherches avec Google sur "TG71BM" ("EN" qui est en tête est l’abréviation de EasyNote) qu'il y a plusieurs modèles qui ont ce préfixe. Pourrais-tu donner un lien vers une page où on peut voir le modèle en question sur le site où il a été acheté ?
Dernière modification par malbo (Le 24/06/2015, à 06:28)
Hors ligne
#11 Le 24/06/2015, à 07:47
- malbo
Re : No bootable device
(Suite de mon post)
En fouillant, je viens de tomber sur ce post de Crestey : http://forum.ubuntu-fr.org/viewtopic.ph … #p19682001
Peux-tu vérifier dans l'onglet "Security" de ton "Bios" si tu as une ligne "select an uefi file as trusted" comme sur cette vue extraite du post de Crestey ?
Si oui, il y sans doute une bonne chance de pouvoir maîtriser mieux ce foutu "Bios" et supprimer le besoin de passer par ALT+F10.
Hors ligne
#12 Le 24/06/2015, à 10:14
- louisoquinn
Re : No bootable device
"Pourrais-tu donner un lien vers une page où on peut voir le modèle en question sur le site où il a été acheté ?"
Je me renseigne et je te donne ça dès que possible.
Concernant l'onglet "Security" du bios, j'ai en effet une ligne "select an uefi file as trusted" .
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#13 Le 24/06/2015, à 10:26
- malbo
Re : No bootable device
Concernant l'onglet "Security" du bios, j'ai en effet une ligne "select an uefi file as trusted" .
Je pense que ce serait très utile que tu étudies toute la discussion initiée par Crestey : http://forum.ubuntu-fr.org/viewtopic.php?id=1825441
Tu verras qu'au départ il a galéré comme toi avec l'entrée "Unknown device", même s'il na pas eu besoin de recourir à ALT + F10. Seulement, à partir du moment où il a su utiliser "select an uefi file as trusted", tu peux constater qu'il a fait ce qu'il a voulu et au final (post #39 du fil), il ne s'est plus emmerdé avec une entrée "Unknown device" puisqu'il a obtenu ce paramétrage de son UEFI :
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0001,0000,0002,2001,2002,2003
Boot0000* Windows Boot Manager HD(2,12c800,96000,c161c34a-2619-4eb9-b173-6cbae9a870d6)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot0001* shix64 ACPI(a0341d0,0)PCI(13,0)03120a00000000000000HD(2,12c800,96000,c161c34a-2619-4eb9-b173-6cbae9a870d6)File(EFIubuntushimx64.efi)A01 ..
dans lequel on peut voir (BootOrder) que le démarrage par défaut de l'ordi se fait sur l'entrée 0001 et cette entrée est une entrée créée de toute pièce par lui - à laquelle il a choisi de donner le nom "shix64" - qui pointe sur le fichier /EFI/ubuntu/shimx64.efi de la partition EFI. Comme tu as toi aussi ce fichier /EFI/ubuntu/shimx64.efi dans ta partition EFI (sda1) et qu'on sait que ce fichier est fonctionnel puisque tu démarres dessus actuellement, il n'y a aucune raison que tu n'y arrives pas.
Dernière modification par malbo (Le 24/06/2015, à 10:31)
Hors ligne
#14 Le 24/06/2015, à 10:30
- louisoquinn
Re : No bootable device
J'étais justement en train de lire le topic. Eh bien je testerai ça ce soir ! Un grand merci pour ton aide et tes précisions.
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#15 Le 24/06/2015, à 19:00
- louisoquinn
Re : No bootable device
Ca fonctionne !
PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10
Hors ligne
#16 Le 25/06/2015, à 05:53
- malbo
Re : No bootable device
Pour en faire profiter le peuple, je te prie de démarrer une session sur ton Ubuntu installé en passant par l'entrée que tu as créée avec "select an uefi file as trusted" et de faire un Boot-Info depuis cette même session. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Peux-tu décrire en quelques lignes comment ça s'est passé pour renseigner "select an uefi file as trusted" ? Et est-ce que t'y es repris à plusieurs fois avant d'y arriver ou bien ça a marché du premier coup ?
Dernière modification par malbo (Le 25/06/2015, à 06:02)
Hors ligne
Pages : 1