#26 Le 31/10/2015, à 15:53
- Compte anonymisé
Re : Freeze de Bios Phoenix
Désolé, je suis resté 22 heures sans connexion, et ça risque de recommencer.
Je compatis 
---------
Un Data/Fax Modem en 56 k est un ancien fax/modem bas débit, pas une carte wifi ! D'ailleurs ton propre lien ne contient ni "wifi" ni "wireless".
Alors elle permettrai uniquement l'accés internet par ethrnet ? Je cite :
Applications
Accès distant
Accès Internet
Serveurs fax (Super G3 Classe 1.0 et 2.1)
Saisie des données par voie téléphonique
---------
Empiriquement, la lecture des videos te donne-t-elle satisfaction ? C'est un critère.
Peux-tu écouter un mp3 et faire du traitement de texte en même temps ? C'en est un autre.
Justement je ne regarde pas de vidéos ni n'écoute de la musique parce que comme je l'ai dit précédement ma carte son n'a jamais fonctionné , je n'ai même pas trouvé de drivers appropriés .
Sinon, deux commandes devraient nous en dire un peu plus :
sudo dmidecodesudo biosdecode
$ sudo dmidecode
[sudo] password for infinite:
# dmidecode 2.11
SMBIOS 2.2 present.
39 structures occupying 1053 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 19 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 08/19/2003
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer:
Product Name: SiS-648FX
Version:
Serial Number:
Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: Socket 478
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel Celeron(R)
Voltage: 0.0 V
External Clock: 100 MHz
Max Speed: 1500 MHz
Current Speed: 2600 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000C
L3 Cache Handle: No L3 Cache
Handle 0x0005, DMI type 4, 32 bytes
Processor Information
Socket Designation: Socket 478
Type: Central Processor
Family: Unknown
Manufacturer: Unknown
ID: 00 00 00 00 00 00 00 00
Version: Intel Celeron(R)
Voltage: 0.0 V
External Clock: 100 MHz
Max Speed: 1500 MHz
Current Speed: 2600 MHz
Status: Populated, Disabled By User
Upgrade: ZIF Socket
L1 Cache Handle: 0x000B
L2 Cache Handle: 0x000D
L3 Cache Handle: No L3 Cache
Handle 0x0006, DMI type 5, 22 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 3072 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 3
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities:
None
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: None
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: None
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 20 kB
Maximum Size: 20 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 20 kB
Maximum Size: 20 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000D, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Other
Port Type: USB
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0018, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001B, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x001C, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x001D, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 3
Handle 0x001E, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x001D
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: SDRAM
Type Detail: Synchronous
Handle 0x001F, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x001D
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: Unknown
Handle 0x0020, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x001D
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: Unknown
Handle 0x0021, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x001D
Partition Width: 1
Handle 0x0022, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x001E
Memory Array Mapped Address Handle: 0x0021
Partition Row Position: 1
Handle 0x0023, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001F
Memory Array Mapped Address Handle: 0x0021
Partition Row Position: 1
Handle 0x0024, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0020
Memory Array Mapped Address Handle: 0x0021
Partition Row Position: 1
Handle 0x0025, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0026, DMI type 127, 4 bytes
End Of Table
$ $ sudo biosdecode
[sudo] password for infinite:
# biosdecode 2.11
SMBIOS 2.2 present.
Structure Table Length: 1053 bytes
Structure Table Address: 0x000F0000
Number Of Structures: 39
Maximum Structure Size: 81 bytes
ACPI 1.0 present.
OEM Identifier: AWARD
RSD Table 32-bit Address: 0x1FFF3000
BIOS32 Service Directory present.
Revision: 0
Calling Interface Address: 0x000FB8F0
PNP BIOS 1.0 present.
Event Notification: Not Supported
Real Mode 16-bit Code Address: F000:C398
Real Mode 16-bit Data Address: F000:0000
16-bit Protected Mode Code Address: 0x000FC370
16-bit Protected Mode Data Address: 0x000F0000
PCI Interrupt Routing 1.0 present.
Router ID: 00:02.0
Exclusive IRQs: 3 5 9 10 11
Compatible Router: 1039:0008
Slot Entry 1: ID 00:09, slot number 1
Slot Entry 2: ID 00:0a, slot number 2
Slot Entry 3: ID 00:0b, slot number 3
Slot Entry 4: ID 00:0c, slot number 4
Slot Entry 5: ID 00:0d, slot number 5
Slot Entry 6: ID 00:0f, slot number 6
Slot Entry 7: ID 00:0e, slot number 7
Slot Entry 8: ID 00:01, on-board
Slot Entry 9: ID 00:03, on-board
:~$
---------
Un seul des 2 coeurs de ton Celeron est utilisé. J'ignore pourquoi. Mais ce n'est pas normal.
---------
Moi aussi , aucune configuration matérielle de ma part...
==========
Aprés 3 fois
$ echo $GDMSESSION
$ echo $GDMSESSION
$ echo $GDMSESSION
$ #27 Le 01/11/2015, à 18:13
- moko138
Re : Freeze de Bios Phoenix
Pour ta RAM, je n'ai pas de certitude. Mais je crois que tu as de la DDR. Sinon, ton pc ramerait abominablement et je ne pense pas que tu aurais la possibilité de mettre 3 fois 1 Gio.
--
Donne
echo $XDG_CURRENT_DESKTOPdpkg -l | grep xfdeslscpu --
Pour l'accès internet filaire, tu n'as pas besoin du
modem qui bride ta connexion à 56 k !
sauf si ta carte-mère est dépourvue de prise RJ45, ce qui serait très étonnant ET que tu n'as pas de carte wifi.
Concrètement : si tu vois 2 prises RJ45 (ethernet, à 8 broches) à l'arrière de ta tour,
tu vires le modem.
Puis, le câble qui relie ta box et ton pc, tu le branches à ta carte mère.
--
Pour ta carte son SiS963, je crois que son pilote n'est plus dans les noyaux actuels, mais qu'on peut trouver un pilote sur la Toile : à vérifier. Donne
lspci -nnk | grep -i audioet
lspci -nnk | grep -i sisDernière modification par moko138 (Le 01/11/2015, à 18:23)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#28 Le 01/11/2015, à 20:33
- Compte anonymisé
Re : Freeze de Bios Phoenix
$ echo $XDG_CURRENT_DESKTOP
XFCE
$ $ dpkg -l | grep xfdes
ii xfdesktop4 4.8.3-2ubuntu7 xfce desktop background, icons and root menu manager
ii xfdesktop4-data 4.8.3-2ubuntu7 xfce desktop background, icons and root menu (common files)
$ $ lscpu
Architecture: i686
Mode(s) opératoire(s) des processeurs :32-bit
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Thread(s) par cœur : 1
Cœur(s) par socket : 1
Socket(s): 1
Identifiant constructeur :GenuineIntel
Famille de processeur :15
Modèle : 2
Révision : 9
Vitesse du processeur en MHz :2606.141
BogoMIPS: 5212.28
$ ===============
Pour l'accès internet filaire, tu n'as pas besoin du
modem qui bride ta connexion à 56 k !
sauf si ta carte-mère est dépourvue de prise RJ45, ce qui serait très étonnant ET que tu n'as pas de carte wifi.
Je ne pense pas avoir de carte wifi , j'utilisait une clé wifi configuré à l'installation de l'OS récemment mais j'ai arrété car comme dit précédemment , avec elle le chargement du bios était 2 fois plus long.
Concrètement : si tu vois 2 prises RJ45 (ethernet, à 8 broches) à l'arrière de ta tour,
tu vires le modem.
C'est exactement ça sauf que je ne sais pas comment virer le modem, je cherche une méthode .
~$ lspci -nnk | grep -i audio
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller [1039:7012] (rev a0)
$ $ lspci -nnk | grep -i sis
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 645xx [1039:0648] (rev 51)
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0003]
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller [1039:0963] (rev 25)
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller [1039:0016]
Kernel driver in use: sis96x_smbus
Kernel modules: i2c-sis96x
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513]
Kernel driver in use: pata_sis
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller [1039:7012] (rev a0)
00:03.0 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f)
00:03.1 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f)
00:03.3 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002]
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
Kernel driver in use: sis900
$ #29 Le 04/11/2015, à 15:00
- moko138
Re : Freeze de Bios Phoenix
Mon dernier message de dimanche soir n'est pas passé :
Eh bien ton Celeron n'a qu'un coeur.
Reste à comprendre pourquoi le noyau lui en cherche un second...
Pour ôter le modem-carte-fille, après ouverture de la tour, il faut (presque toujours) un tournevis cruciforme de taille moyenne.
Ta carte-mère a déjà cette carte réseau filaire :
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
et ton systeme a son module :
Kernel driver in use: sis900
Pour le son, il faut chercher, on dirait que tu as deux périphériques :
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller [1039:7012] (rev a0)
et peut-être
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller [1039:0963] (rev 25)
Le 7012 utilise (on le voit en #21) driver=snd_intel8x0.
Mais le son, ce n'est ni ma partie ni surtout le même sujet. Or le règlement du forum prévoit un sujet par fil.
Donc je t'invite à créer un fil spécifique dans la bonne section du forum.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne