#1051 Le 29/01/2017, à 09:21
- moko138
Re : Topic des lève-tôt [partie 12]
L_d_v_c@ a écrit :
Sinon ce message est assez clair : [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Merci
- de me dire si la mise à jour est sans risque ;
- si oui, de me rappeler comment procéder.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1052 Le 29/01/2017, à 09:25
- moko138
Re : Topic des lève-tôt [partie 12]
GR 34 a écrit :
moko138 a écrit :...
...une carte graphique soudée qui n'est plus prise en charge après Xorg 12, ce qui exclut *buntu 14.04, Debian 8 et versions ultérieures).Qu'est-ce que tu veux dire par là ?
Mon pc est (...) carte graphique interne ( Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04) ) et je suis sous Jessie Debian 8 Mate. Et ça roule super bien.
Ta carte Intel est prise en charge ; les vieilles nVidia ne le sont pas.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1053 Le 29/01/2017, à 09:28
- moko138
Re : Topic des lève-tôt [partie 12]
PPdM a écrit :
Bonjour
Salut PPdM !
Je t'ai posté une réponse 8 secondes avant ton envoi; peut-être ne l'as-tu pas vue.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1054 Le 29/01/2017, à 10:04
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
Il est possible qu'il y ait maldonne :
Car, commedmesg|head -n 800commence à "[168276.481054]", je t'ai envoyé dmesg.0|head -n 800.
mais... il est possible qu'il soit antérieur au changement de barrette (dont je n'ai pas noté la date).
Il y a un sérieux problème si dmesg|head -n 1 ne commence pas à 0.000000000, non ? Est-ce possible que dmesg oublie le début ? (mémoire tampon ? Curieux tout ça.)
moko138 a écrit :
Donc je vais t'envoyer
cat /var/log/dmesg | head -n 800qui contient bien "[ 0.000000] Initializing (...)" et "total RAM covered: 2039M".
Non, je ne veux pas de cat /var/log/dmesg | head -n 800, ce n'est pas la même chose que dmesg.
Envoie moi le retour suivant, s'il-te-plait, même s'il n'y a que le début qui m'intéresse (les 700 à 1000 premières lignes), pas grave.
dmesgMerci.
Hier j'ai passé 15 minutes à comparer les retours de :
sudo lshw|grep -iC 29 "*-bank:1"
et de :
sudo lshw -c memory -sanitize
avant de comprendre, que c'était à peu près les mêmes résultats (mais différents quant à la présentation).
sudo lshw|grep -iC 29 "*-bank:1" ne me parle PAS DU TOUT.
sudo lshw -c memory -sanitize me renseigne sur les informations relatives à la mémoire en masquant les numéros de série.
Dernière modification par Compte supprimé (Le 29/01/2017, à 10:05)
#1055 Le 29/01/2017, à 10:11
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
…
qui contient bien "[ 0.000000] Initializing (...)" et "total RAM covered: 2039M".
Manifestement, même si je doute encore de cat /var/log/dmesg | head -n 800 et que je n'ai pas envie de perdre ma journée à comparer,
2039M ne peut se faire à partir de 1024M+512M.
Mais 2039M < 2048M et 2039M < 2560M et seulement cette information ne permet pas de conclure complètement, le début de dmesg me renseignera globalement sur ce qui se passe dans cette machine.
#1056 Le 29/01/2017, à 10:13
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
Bien reçu ton fichier, moko138, je regarde après mon petit déjeuner. 
#1057 Le 29/01/2017, à 10:18
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
L_d_v_c@ a écrit :Sinon ce message est assez clair : [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Merci
- de me dire si la mise à jour est sans risque ;
- si oui, de me rappeler comment procéder.
Cela comporte un peu plus de risque que d'allumer ou d'éteindre la machine, c'est vrai, mais il y a des procédures qui limitent les risques, et en général ça se passe bien.
C'est un portable, donc flashrom ne fonctionne pas forcément, je vais me renseigner mais FDOS avec le programme dos/windows, ne semble pas poser de problème particulier. C'est comme ça que j'ai souvent flasher ROM (BIOS) et contrôleurs de disques durs.
Dernière modification par Compte supprimé (Le 29/01/2017, à 10:19)
#1058 Le 29/01/2017, à 10:23
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
Moko138, as-tu pensé, si tu as redémarré l'ordinateur, à vérifier dans le BIOS et à ne réserver que 32 Mio ou 64 Mio pour la partie graphique ? C'est qui est beaucoup plus qu'il n'en faut réellement.
[ 1.300177] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.317760] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.322898] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000Apparemment, il y a déjà 8+256 Mio perdus ici, ce qui confirme tes impressions de souvenirs.
#1059 Le 29/01/2017, à 10:30
- moko138
Re : Topic des lève-tôt [partie 12]
grep -C 29 "*-bank:1" prend 29 lignes de part et d'autre de *-bank:1".
Donc on a toute la mémoire (sauf s'il y a plus de 4 connecteurs).
- -
Ludovic a écrit :
Il y a un sérieux problème si dmesg|head -n 1 ne commence pas à 0.000000000, non ?
Non :
Est-ce possible que dmesg oublie le début ?
Rappelle-toi que, quelle que soit la commande (dmesg ou cat /var/log/dmesg ou autre), le terminal n'affiche que les n dernières lignes.
Chez moi n est réglé à 2500.
Donc dmesg|head -n 800 prend les 800 premières lignes parmi les 2500 dernières !
Mais avec un uptime de presque 5 jours, et un dmesg farci de lignes relatives à la wifi, 2.500 lignes me fait seulement remonter à
[168277.251857] ieee80211 (...) droppingD'où l'intérêt de
cat /var/log/dmesg | head -n 800qui donnne bien, quoi que tu aies écrit, les 800 premières lignes que tu voulais.
Ou alors explique-moi où je me trompe.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1060 Le 29/01/2017, à 10:37
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138, tu te trompes en essayant d’improviser des commandes :
ubuntu@ubuntu-64:~$ sudo cat /var/log/dmesg |head -n 10
(Nothing has been logged yet.)
ubuntu@ubuntu-64:~$ dmesg |head -n 10
[ 0.000000] microcode: CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=ac432eba-19d8-4ac7-9867-7aee2d690d26 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHaulsCet exemple prouve la non-égalité entre les commandes dmesg et le fichier /var/log/dmesg.
Donc ça fait perdre du temps et ce n'est pas cool.
Je te propose donc ici une autre solution qui ne sera pas dépendante de ton réglage d'historique de lignes de la console :
sudo dmesg > ~/Bureau/dmesg.txtDernière modification par Compte supprimé (Le 29/01/2017, à 10:38)
#1061 Le 29/01/2017, à 10:56
- moko138
Re : Topic des lève-tôt [partie 12]
L_d_v_c@ a écrit :
Moko138, as-tu pensé, si tu as redémarré l'ordinateur, à vérifier dans le BIOS
Je n'ai pas redémarré.
Dans le bios, sûrement pas (cf. message d'hier 20h02).
L_d_v_c@ a écrit :
Moko138, as-tu pensé, si tu as redémarré l'ordinateur, (...) et à ne réserver que 32 Mio ou 64 Mio pour la partie graphique ? C'est qui est beaucoup plus qu'il n'en faut réellement.
Est-ce que cela n'amoindrirait pas les performances video, déjà maigres, du notebook ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1062 Le 29/01/2017, à 11:21
- moko138
Re : Topic des lève-tôt [partie 12]
1)
(Nothing has been logged yet.)Cet exemple prouve la non-égalité entre les commandes dmesg et le fichier /var/log/dmesg.
Tu as tout à fait raison
dans le cadre de systemd de Xenial.
Mais j'utilise Trusty (et parfois Precise).
- -
2)
Je te propose donc ici une autre solution qui ne sera pas dépendante de ton réglage d'historique de lignes de la console :
sudo dmesg > ~/Bureau/dmesg.txt
sudo est inutile mais j'ai appliqué strictement ta commande, et le dmesg.txt ainsi produit commence par
[168348.069182] car (bis) :
Rappelle-toi que, quelle que soit la commande (dmesg ou cat /var/log/dmesg ou autre), le terminal n'affiche que les n dernières lignes.
- -
3)
Donc ça fait perdre du temps et ce n'est pas cool.
Là encore, tu as raison, donc je te propose de suspendre ce débat que nous reprendrons mieux après nous être aéré les méninges et les poumons.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1063 Le 29/01/2017, à 11:39
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
…
L_d_v_c@ a écrit :Moko138, as-tu pensé, si tu as redémarré l'ordinateur, (...) et à ne réserver que 32 Mio ou 64 Mio pour la partie graphique ? C'est qui est beaucoup plus qu'il n'en faut réellement.
Est-ce que cela n'amoindrirait pas les performances video, déjà maigres, du notebook ?
Une écran logique, en couleurs 8 bits par composante, donc 24 bits = 3 octets par pixel, consomme largeur_pixels×hauteur_pixel*3 octets.
Par exemple en 1920×1080×3=6220800 octets=6075Kio.
Avec la technique du dual-playfield qui consiste à préparer une image avant de l'afficher, il faut donc 12150Kio en 1920×1080×24 bits ≤ 12 Mio.
Certaines cartes graphiques travaillent sur 4 images à la fois, donc ≤ 24 Mio dans tous les cas d'un seul écran 1920×1080×24 bits.
On ajoute un écran externe ? on ne travaille pas forcément en dual-playfield, donc dans le pire des cas la vidéo consomme 48 Mio maximum pour deux écrans physiques en 1920×1080×24 bits.
Mais ton écran principal n'est pas forcément en 1920×1080×24 sur ton ordinateur portable. En plus la technique des 4 images (1 affichée - 3 images en cache) n'est pas forcément utilisée. Le dual-playfiled peut l'être, et dans le cas de vidéo 2D, une seule image peut n'être qu'utilisée (6075 Kio).
En 1024×768×24bits→2304 Kio (< 3 Mio) pour un écran 2D de bureautique.
Rien ne t'empêche un jour de n'allouer que 8Mio pour la carte graphique, de tester VLC avec une vidéo plein écran, et d'augmenter 16Mio, 32Mio… si 8 Mio ne suffisent pas à afficher correctement VLC.
Dernière modification par Compte supprimé (Le 29/01/2017, à 11:39)
#1064 Le 29/01/2017, à 11:55
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
1)
(Nothing has been logged yet.)Cet exemple prouve la non-égalité entre les commandes dmesg et le fichier /var/log/dmesg.
Tu as tout à fait raison
dans le cadre de systemd de Xenial.Mais j'utilise Trusty (et parfois Precise).
- -
Comprends-tu la difficulté pour suivre les commandes qui sortent de la syntaxe normalisée ?
moko138 a écrit :
2)
Je te propose donc ici une autre solution qui ne sera pas dépendante de ton réglage d'historique de lignes de la console :
sudo dmesg > ~/Bureau/dmesg.txtsudo est inutile mais j'ai appliqué strictement ta commande, et le dmesg.txt ainsi produit commence par
[168348.069182]car (bis) :
Rappelle-toi que, quelle que soit la commande (dmesg ou cat /var/log/dmesg ou autre), le terminal n'affiche que les n dernières lignes.
- -
Non, ta sortie commence à [168348.069182] pour une autre raison que le nombre de lignes d'historiques qui n'intervient pas du tout dans la commande d'écriture directe de la sortie de dmesg dans un fichier.
Alors j'ai passé l'historique à 10 lignes. Fermé le terminal, puis j'ai rouvert le terminal (réinitialisation) et j'ai lancé la commande suivante :
sudo dmesg > ~/Bureau/dmesg.txt
[sudo] Mot de passe de ubuntu :
ubuntu@ubuntu-64:~$ Puis voici le contenu du fichier généré. Donc ce que tu penses a peut-être évolué, mais je ne pense pas que le nombre de lignes d'historique de l'affichage influe sur le retour de la commande dmesg directement dans un fichier, enfin, pas à ma connaissance.
[ 0.000000] microcode: CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=ac432eba-19d8-4ac7-9867-7aee2d690d26 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddd7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddd80000-0x00000000ddd8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddd8e000-0x00000000dddcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dddd0000-0x00000000dddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5QPL-AM, BIOS 0408 03/16/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DDE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3550MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 4062M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3550MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 3552MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xdde00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xddd80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x334b0000-0x35a4ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB800 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000DDD80100 000054 (v01 A_M_I_ OEMXSDT 03001016 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DDD80290 0000F4 (v03 A_M_I_ OEMFACP 03001016 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000DDD80440 007B08 (v01 A1282 A1282000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DDD8E000 000040
[ 0.000000] ACPI: FACS 0x00000000DDD8E000 000040
[ 0.000000] ACPI: MCFG 0x00000000DDD80400 00003C (v01 A_M_I_ OEMMCFG 03001016 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DDD8E040 000089 (v01 A_M_I_ AMI_OEM 03001016 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDD87F50 000038 (v01 A_M_I_ OEMHPET 03001016 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000DDD8E0D0 002024 (v01 A_M_I_ GMCHSCI 03001016 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DDD90580 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ddd7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 1039646
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14134 pages used for memmap
[ 0.000000] DMA32 zone: 904576 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xde000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: No APIC-table, disabling MPS
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd80000-0xddd8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd8e000-0xdddcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdddd0000-0xdddfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdde00000-0xddffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s98264 r8192 d28712 u2097152
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023379
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=ac432eba-19d8-4ac7-9867-7aee2d690d26 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3969468K/4158584K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 189116K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:32 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1999.859 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.71 BogoMIPS (lpj=7999436)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004026] ACPI: Core revision 20150930
[ 0.011300] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.011307] ACPI: setting ELCR to 0200 (from 0ce8)
[ 0.011338] Security Framework initialized
[ 0.011340] Yama: becoming mindful.
[ 0.011363] AppArmor: AppArmor initialized
[ 0.011810] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013806] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014793] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014806] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015183] Initializing cgroup subsys io
[ 0.015192] Initializing cgroup subsys memory
[ 0.015205] Initializing cgroup subsys devices
[ 0.015209] Initializing cgroup subsys freezer
[ 0.015213] Initializing cgroup subsys net_cls
[ 0.015218] Initializing cgroup subsys perf_event
[ 0.015221] Initializing cgroup subsys net_prio
[ 0.015227] Initializing cgroup subsys hugetlb
[ 0.015231] Initializing cgroup subsys pids
[ 0.015259] CPU: Physical Processor ID: 0
[ 0.015261] CPU: Processor Core ID: 0
[ 0.015263] mce: CPU supports 6 MCE banks
[ 0.015274] CPU0: Thermal monitoring enabled (TM2)
[ 0.015279] process: using mwait in idle threads
[ 0.015285] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.015287] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.025160] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[ 0.028009] ftrace: allocating 32064 entries in 126 pages
[ 0.044134] smpboot: Max logical packages: 1
[ 0.044140] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.044142] smpboot: SMP motherboard not detected
[ 0.044143] smpboot: SMP disabled
[ 0.048000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.048000] core: PEBS disabled due to CPU errata
[ 0.048000] ... version: 2
[ 0.048000] ... bit width: 40
[ 0.048000] ... generic registers: 2
[ 0.048000] ... value mask: 000000ffffffffff
[ 0.048000] ... max period: 000000007fffffff
[ 0.048000] ... fixed-purpose events: 3
[ 0.048000] ... event mask: 0000000700000003
[ 0.048000] x86: Booted up 1 node, 1 CPUs
[ 0.048000] smpboot: Total of 1 processors activated (3999.71 BogoMIPS)
[ 0.048000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.048000] devtmpfs: initialized
[ 0.049313] evm: security.selinux
[ 0.049315] evm: security.SMACK64
[ 0.049316] evm: security.SMACK64EXEC
[ 0.049318] evm: security.SMACK64TRANSMUTE
[ 0.049319] evm: security.SMACK64MMAP
[ 0.049321] evm: security.ima
[ 0.049322] evm: security.capability
[ 0.049408] PM: Registering ACPI NVS region [mem 0xddd8e000-0xdddcffff] (270336 bytes)
[ 0.049496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.049587] pinctrl core: initialized pinctrl subsystem
[ 0.049728] RTC time: 6:27:54, date: 01/27/17
[ 0.049873] NET: Registered protocol family 16
[ 0.050096] cpuidle: using governor ladder
[ 0.050099] cpuidle: using governor menu
[ 0.050102] PCCT header not found.
[ 0.050170] ACPI: bus type PCI registered
[ 0.050173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.050260] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.050263] PCI: not using MMCONFIG
[ 0.050265] PCI: Using configuration type 1 for base access
[ 0.052309] ACPI: Added _OSI(Module Device)
[ 0.052312] ACPI: Added _OSI(Processor Device)
[ 0.052314] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.054584] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.057441] ACPI: Interpreter enabled
[ 0.057466] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.057469] ACPI: Using PIC for interrupt routing
[ 0.057505] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.058665] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.058671] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[ 0.058801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.065088] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.065096] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.065103] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.065113] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.065367] PCI host bridge to bus 0000:00
[ 0.065371] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.065374] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.065377] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.065379] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.065382] pci_bus 0000:00: root bus resource [mem 0xdde00000-0xefffffff window]
[ 0.065384] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff window]
[ 0.065387] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.065398] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.065429] DMAR: Forcing write-buffer flush capability
[ 0.065431] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.065519] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[ 0.065539] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.065547] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.065554] pci 0000:00:02.0: reg 0x20: [io 0xcc00-0xcc07]
[ 0.065685] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.065713] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 0.065777] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.065868] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.065936] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.065985] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.066038] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.066111] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.066159] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.066213] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.066256] pci 0000:00:1d.0: reg 0x20: [io 0xc400-0xc41f]
[ 0.066338] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.066390] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.066433] pci 0000:00:1d.1: reg 0x20: [io 0xc480-0xc49f]
[ 0.066516] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.066565] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.066608] pci 0000:00:1d.2: reg 0x20: [io 0xc800-0xc81f]
[ 0.066691] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.066742] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.066785] pci 0000:00:1d.3: reg 0x20: [io 0xc880-0xc89f]
[ 0.066866] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.066923] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.066950] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9f7c00-0xfe9f7fff]
[ 0.067023] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.067068] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.067122] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.067215] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.067267] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.067356] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.067362] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.067366] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.067467] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.067483] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.067493] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.067502] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
[ 0.067512] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
[ 0.067522] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.067541] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.067544] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.067546] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.067549] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.067635] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.067654] pci 0000:00:1f.2: reg 0x10: [io 0xc080-0xc087]
[ 0.067663] pci 0000:00:1f.2: reg 0x14: [io 0xc000-0xc003]
[ 0.067671] pci 0000:00:1f.2: reg 0x18: [io 0xbc00-0xbc07]
[ 0.067680] pci 0000:00:1f.2: reg 0x1c: [io 0xb880-0xb883]
[ 0.067688] pci 0000:00:1f.2: reg 0x20: [io 0xb800-0xb80f]
[ 0.067721] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.067858] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.067929] pci 0000:01:00.0: [1969:1026] type 00 class 0x020000
[ 0.067972] pci 0000:01:00.0: reg 0x10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.067985] pci 0000:01:00.0: reg 0x18: [io 0xdc00-0xdc7f]
[ 0.068084] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.068154] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.068165] pci 0000:00:1c.1: PCI bridge to [bus 01]
[ 0.068169] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.068174] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.068225] pci 0000:03:01.0: [10b7:9050] type 00 class 0x020000
[ 0.068242] pci 0000:03:01.0: reg 0x10: [io 0xec00-0xec3f]
[ 0.068291] pci 0000:03:01.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.068381] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.068386] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.068390] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.068396] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.068399] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.068402] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.068405] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.068407] pci 0000:00:1e.0: bridge window [mem 0xdde00000-0xefffffff window] (subtractive decode)
[ 0.068410] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff window] (subtractive decode)
[ 0.069256] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.069324] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.069389] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.069454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.069517] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.069583] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.069647] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.069711] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.069789] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.069970] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.069973] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.069977] vgaarb: loaded
[ 0.069979] vgaarb: bridge control possible 0000:00:02.0
[ 0.070309] SCSI subsystem initialized
[ 0.070369] libata version 3.00 loaded.
[ 0.070403] ACPI: bus type USB registered
[ 0.070429] usbcore: registered new interface driver usbfs
[ 0.070441] usbcore: registered new interface driver hub
[ 0.070456] usbcore: registered new device driver usb
[ 0.070626] PCI: Using ACPI for IRQ routing
[ 0.072105] PCI: pci_cache_line_size set to 64 bytes
[ 0.072151] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.072153] e820: reserve RAM buffer [mem 0xddd80000-0xdfffffff]
[ 0.072313] NetLabel: Initializing
[ 0.072315] NetLabel: domain hash size = 128
[ 0.072316] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.072334] NetLabel: unlabeled traffic allowed by default
[ 0.072438] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.072443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.072447] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.074494] amd_nb: Cannot enumerate AMD northbridges
[ 0.074509] clocksource: Switched to clocksource hpet
[ 0.122165] AppArmor: AppArmor Filesystem Enabled
[ 0.122270] pnp: PnP ACPI init
[ 0.122379] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.122385] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.122465] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.122662] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.122668] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122826] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.122830] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.122833] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.122836] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.122839] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.122842] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.122847] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122968] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.122973] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123204] pnp 00:05: [dma 0 disabled]
[ 0.123287] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.123384] system 00:06: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.123388] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.123392] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123455] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.123547] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.123551] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123748] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.123752] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.123755] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.123758] system 00:09: [mem 0x00100000-0xdddfffff] could not be reserved
[ 0.123761] system 00:09: [mem 0xf0000000-0xffffffff] could not be reserved
[ 0.123765] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.123911] pnp: PnP ACPI: found 10 devices
[ 0.130602] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.130626] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.130630] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.130634] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.130644] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.130657] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.130662] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.130665] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.130668] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.130671] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.130674] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.130677] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.130680] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.130683] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.130689] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdde00000-0xddffffff]
[ 0.130696] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.130702] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.130706] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.130710] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.130714] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.130719] pci 0000:00:1c.0: bridge window [mem 0xdde00000-0xddffffff]
[ 0.130723] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.130730] pci 0000:00:1c.1: PCI bridge to [bus 01]
[ 0.130733] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.130738] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.130743] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.130750] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.130753] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.130758] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.130767] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.130770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.130772] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.130775] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.130778] pci_bus 0000:00: resource 8 [mem 0xdde00000-0xefffffff window]
[ 0.130780] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff window]
[ 0.130783] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.130785] pci_bus 0000:02: resource 1 [mem 0xdde00000-0xddffffff]
[ 0.130788] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.130790] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.130793] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.130795] pci_bus 0000:01: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.130798] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.130800] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.130803] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.130806] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.130808] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.130811] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.130813] pci_bus 0000:03: resource 8 [mem 0xdde00000-0xefffffff window]
[ 0.130816] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff window]
[ 0.130862] NET: Registered protocol family 2
[ 0.131097] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.131214] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.131368] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.131439] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.131467] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.131586] NET: Registered protocol family 1
[ 0.131612] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.131817] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 0.131820] PCI: setting IRQ 3 as level-triggered
[ 0.132060] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[ 0.132062] PCI: setting IRQ 6 as level-triggered
[ 0.132269] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 0.132271] PCI: setting IRQ 7 as level-triggered
[ 0.132477] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.132479] PCI: setting IRQ 11 as level-triggered
[ 0.132731] PCI: CLS 32 bytes, default 64
[ 0.132811] Trying to unpack rootfs image as initramfs...
[ 0.958061] Freeing initrd memory: 38528K (ffff8800334b0000 - ffff880035a50000)
[ 0.958134] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.958138] software IO TLB [mem 0xd9d80000-0xddd80000] (64MB) mapped at [ffff8800d9d80000-ffff8800ddd7ffff]
[ 0.958330] Scanning for low memory corruption every 60 seconds
[ 0.958715] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.958746] audit: initializing netlink subsys (disabled)
[ 0.958772] audit: type=2000 audit(1485498474.952:1): initialized
[ 0.959191] Initialise system trusted keyring
[ 0.959321] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.961454] zbud: loaded
[ 0.961701] VFS: Disk quotas dquot_6.6.0
[ 0.961748] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.962125] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.962474] fuse init (API version 7.23)
[ 0.962663] Key type big_key registered
[ 0.962688] Allocating IMA MOK and blacklist keyrings.
[ 0.963051] Key type asymmetric registered
[ 0.963056] Asymmetric key parser 'x509' registered
[ 0.963114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.963151] io scheduler noop registered
[ 0.963156] io scheduler deadline registered (default)
[ 0.963201] io scheduler cfq registered
[ 0.963334] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.963694] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.963696] PCI: setting IRQ 10 as level-triggered
[ 0.963802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.963815] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.963853] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.963855] vesafb: scrolling: redraw
[ 0.963857] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.963874] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 0.963992] Console: switching to colour frame buffer device 80x30
[ 0.964037] fb0: VESA VGA frame buffer device
[ 0.964061] intel_idle: does not run on family 6 model 15
[ 0.964153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.964158] ACPI: Power Button [PWRB]
[ 0.964214] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.964217] ACPI: Power Button [PWRF]
[ 0.964627] GHES: HEST is not enabled!
[ 0.964768] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.985155] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.986992] Linux agpgart interface v0.103
[ 0.987053] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[ 0.987076] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.987208] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.987329] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.990737] brd: module loaded
[ 0.992249] loop: module loaded
[ 0.992456] ata_piix 0000:00:1f.1: version 2.13
[ 0.993630] scsi host0: ata_piix
[ 0.993734] scsi host1: ata_piix
[ 0.993786] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.993788] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.993955] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[ 0.993964] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.995255] scsi host2: ata_piix
[ 0.995350] scsi host3: ata_piix
[ 0.995403] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 10
[ 0.995405] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 10
[ 0.995526] libphy: Fixed MDIO Bus: probed
[ 0.995531] tun: Universal TUN/TAP device driver, 1.6
[ 0.995532] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.995622] PPP generic driver version 2.4.2
[ 0.995709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.995717] ehci-pci: EHCI PCI platform driver
[ 0.995851] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.995859] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.995873] ehci-pci 0000:00:1d.7: debug port 1
[ 0.999766] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.999777] ehci-pci 0000:00:1d.7: irq 3, io mem 0xfe9f7c00
[ 1.008019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.008126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.008131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008136] usb usb1: Product: EHCI Host Controller
[ 1.008140] usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
[ 1.008144] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.008318] hub 1-0:1.0: USB hub found
[ 1.008328] hub 1-0:1.0: 8 ports detected
[ 1.008547] ehci-platform: EHCI generic platform driver
[ 1.008567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.008574] ohci-pci: OHCI PCI platform driver
[ 1.008590] ohci-platform: OHCI generic platform driver
[ 1.008601] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.008721] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.008732] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.008740] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.008761] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000c400
[ 1.008816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.008820] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008822] usb usb2: Product: UHCI Host Controller
[ 1.008825] usb usb2: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 1.008827] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.008957] hub 2-0:1.0: USB hub found
[ 1.008966] hub 2-0:1.0: 2 ports detected
[ 1.009165] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.009173] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.009179] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.009201] uhci_hcd 0000:00:1d.1: irq 6, io base 0x0000c480
[ 1.009253] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.009256] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.009258] usb usb3: Product: UHCI Host Controller
[ 1.009261] usb usb3: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 1.009263] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.009392] hub 3-0:1.0: USB hub found
[ 1.009401] hub 3-0:1.0: 2 ports detected
[ 1.009593] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.009600] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.009607] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.009628] uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000c800
[ 1.009680] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.009683] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.009686] usb usb4: Product: UHCI Host Controller
[ 1.009688] usb usb4: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 1.009691] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.009818] hub 4-0:1.0: USB hub found
[ 1.009827] hub 4-0:1.0: 2 ports detected
[ 1.010024] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.010032] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.010039] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.010060] uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000c880
[ 1.010114] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.010117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.010119] usb usb5: Product: UHCI Host Controller
[ 1.010122] usb usb5: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
[ 1.010124] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.010252] hub 5-0:1.0: USB hub found
[ 1.010261] hub 5-0:1.0: 2 ports detected
[ 1.010441] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.010444] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.011206] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.011340] mousedev: PS/2 mouse device common for all mice
[ 1.011501] rtc_cmos 00:01: RTC can wake from S4
[ 1.011633] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.011654] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.011665] i2c /dev entries driver
[ 1.011742] device-mapper: uevent: version 1.0.3
[ 1.011829] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.011849] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.012277] NET: Registered protocol family 10
[ 1.012514] NET: Registered protocol family 17
[ 1.012531] Key type dns_resolver registered
[ 1.012747] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa4
[ 1.012792] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.012977] registered taskstats version 1
[ 1.012998] Loading compiled-in X.509 certificates
[ 1.014390] Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
[ 1.014413] zswap: loaded using pool lzo/zbud
[ 1.017073] Key type trusted registered
[ 1.021868] Key type encrypted registered
[ 1.021881] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.021886] ima: No TPM chip found, activating TPM-bypass!
[ 1.021918] evm: HMAC attrs: 0x1
[ 1.022169] Magic number: 1:558:469
[ 1.022300] rtc_cmos 00:01: setting system clock to 2017-01-27 06:27:55 UTC (1485498475)
[ 1.022398] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.022416] EDD information not available.
[ 1.022482] PM: Hibernation image not present or could not be loaded.
[ 1.034772] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.169582] ata4.01: NODEV after polling detection
[ 1.176137] ata4.00: ATAPI: ATAPI DVD A DH16A6L, ZH1A, max UDMA/100
[ 1.192140] ata4.00: configured for UDMA/100
[ 1.193999] scsi 3:0:0:0: CD-ROM ATAPI DVD A DH16A6L ZH1A PQ: 0 ANSI: 5
[ 1.210217] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.210224] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.210415] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.210540] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 1.212550] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[ 1.212556] Write protecting the kernel read-only data: 14336k
[ 1.213661] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
[ 1.214172] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 1.229662] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.229733] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.229866] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.229955] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230037] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230119] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230209] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230292] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230374] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.230470] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.291251] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.331715] 3c59x: Donald Becker and others.
[ 1.331726] 0000:03:01.0: 3Com PCI 3c905 Boomerang 100baseTx at 000000000001ec00.
[ 1.354618] [drm] Initialized drm 1.1.0 20060810
[ 1.377317] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1.468068] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.490538] ATL1E 0000:01:00.0 enp1s0: renamed from eth0
[ 1.492898] 3c59x 0000:03:01.0 enp3s1: renamed from eth1
[ 1.494072] [drm] Memory usable by graphics device = 2048M
[ 1.494079] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 1.494081] fb: switching to inteldrmfb from VESA VGA
[ 1.494120] Console: switching to colour dummy device 80x25
[ 1.494679] [drm] Replacing VGA console driver
[ 1.504066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.504069] [drm] Driver supports precise vblank timestamp query.
[ 1.505469] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.509456] usb 1-4: New USB device found, idVendor=0781, idProduct=556b
[ 1.509463] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.509468] usb 1-4: Product: Cruzer Edge
[ 1.509472] usb 1-4: Manufacturer: SanDisk
[ 1.509476] usb 1-4: SerialNumber: 20053550500CB9008BD9
[ 1.620042] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 1.630126] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[ 1.630132] Raw EDID:
[ 1.630135] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 1.630138] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630141] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630143] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630146] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630148] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630151] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.630153] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.641079] usb 3-1: New USB device found, idVendor=046d, idProduct=c50e
[ 1.641085] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.641089] usb 3-1: Product: USB RECEIVER
[ 1.641093] usb 3-1: Manufacturer: Logitech
[ 1.650611] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.671889] usbcore: registered new interface driver usbhid
[ 1.671893] usbhid: USB HID core driver
[ 1.674734] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C50E.0001/input/input3
[ 1.675170] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-1/input0
[ 1.694088] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[ 1.694095] Raw EDID:
[ 1.694099] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 1.694102] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694104] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694107] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694109] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694111] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694114] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.694116] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.757204] usb 1-5: New USB device found, idVendor=0781, idProduct=5583
[ 1.757211] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.757216] usb 1-5: Product: Ultra Fit
[ 1.757220] usb 1-5: Manufacturer: SanDisk
[ 1.757224] usb 1-5: SerialNumber: 4C530001221029111200
[ 1.758137] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[ 1.758143] Raw EDID:
[ 1.758146] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 1.758150] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758152] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758155] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758157] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758160] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758162] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.758164] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822075] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 130
[ 1.822078] Raw EDID:
[ 1.822081] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[ 1.822084] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822086] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822088] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822091] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822093] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822096] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822098] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1.822104] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
[ 1.938681] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 1.938786] scsi host4: usb-storage 1-4:1.0
[ 1.939074] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1.939143] scsi host5: usb-storage 1-5:1.0
[ 1.939655] usbcore: registered new interface driver usb-storage
[ 1.943950] usbcore: registered new interface driver uas
[ 1.956028] tsc: Refined TSC clocksource calibration: 1999.999 MHz
[ 1.956035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85afc727, max_idle_ns: 881590685098 ns
[ 2.000021] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.016092] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.017711] fbcon: inteldrmfb (fb0) is primary device
[ 2.018067] Console: switching to colour frame buffer device 128x48
[ 2.018101] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.032409] md: linear personality registered for level -1
[ 2.037441] md: multipath personality registered for level -4
[ 2.042558] md: raid0 personality registered for level 0
[ 2.048332] md: raid1 personality registered for level 1
[ 2.124011] raid6: sse2x1 gen() 3428 MB/s
[ 2.192007] raid6: sse2x1 xor() 3414 MB/s
[ 2.260019] raid6: sse2x2 gen() 3512 MB/s
[ 2.328010] raid6: sse2x2 xor() 4164 MB/s
[ 2.396006] raid6: sse2x4 gen() 5937 MB/s
[ 2.464010] raid6: sse2x4 xor() 4664 MB/s
[ 2.464012] raid6: using algorithm sse2x4 gen() 5937 MB/s
[ 2.464014] raid6: .... xor() 4664 MB/s, rmw enabled
[ 2.464016] raid6: using ssse3x2 recovery algorithm
[ 2.467213] xor: measuring software checksum speed
[ 2.504005] prefetch64-sse: 7977.000 MB/sec
[ 2.544004] generic_sse: 7092.000 MB/sec
[ 2.544006] xor: using function: prefetch64-sse (7977.000 MB/sec)
[ 2.547129] async_tx: api initialized (async)
[ 2.566977] md: raid6 personality registered for level 6
[ 2.566982] md: raid5 personality registered for level 5
[ 2.566983] md: raid4 personality registered for level 4
[ 2.576556] md: raid10 personality registered for level 10
[ 2.936734] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Edge 1.26 PQ: 0 ANSI: 5
[ 2.938508] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.939094] sd 4:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 2.940610] sd 4:0:0:0: [sda] Write Protect is off
[ 2.940616] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.941610] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.947231] sda: sda1
[ 2.950601] sd 4:0:0:0: [sda] Attached SCSI removable disk
[ 2.956175] clocksource: Switched to clocksource tsc
[ 2.993233] scsi 5:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 2.995084] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.995591] sd 5:0:0:0: [sdb] 242614272 512-byte logical blocks: (124 GB/116 GiB)
[ 3.022223] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.022233] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.023463] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.091343] sdb: sdb1 sdb2 sdb3
[ 3.094852] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 3.752446] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.669450] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.669592] systemd[1]: Detected architecture x86-64.
[ 4.671240] systemd[1]: Set hostname to <ubuntu-64>.
[ 5.061351] random: nonblocking pool is initialized
[ 5.719532] systemd[1]: Listening on udev Control Socket.
[ 5.719698] systemd[1]: Listening on Journal Socket.
[ 5.719750] systemd[1]: Listening on udev Kernel Socket.
[ 5.719784] systemd[1]: Listening on Syslog Socket.
[ 5.719826] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.719866] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.719931] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.720128] systemd[1]: Created slice System Slice.
[ 5.720890] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.737307] systemd[1]: Starting Load Kernel Modules...
[ 5.738054] systemd[1]: Mounting Huge Pages File System...
[ 5.738775] systemd[1]: Mounting RPC Pipe File System...
[ 5.739711] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.742315] systemd[1]: Started Read required files in advance.
[ 5.747225] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.748915] systemd[1]: Starting Set console keymap...
[ 5.749102] systemd[1]: Reached target User and Group Name Lookups.
[ 5.749338] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.749460] systemd[1]: Created slice User and Session Slice.
[ 5.749493] systemd[1]: Reached target Slices.
[ 5.750289] systemd[1]: Starting Uncomplicated firewall...
[ 5.750458] systemd[1]: Listening on Journal Audit Socket.
[ 5.758506] systemd[1]: Starting Journal Service...
[ 5.759681] systemd[1]: Started Braille Device Support.
[ 5.762077] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.811480] systemd[1]: Reached target Encrypted Volumes.
[ 5.812247] systemd[1]: Mounting Debug File System...
[ 5.812399] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.812492] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.812573] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.813330] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.817407] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.861766] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.895746] systemd[1]: Started Uncomplicated firewall.
[ 5.992811] systemd[1]: Mounted Huge Pages File System.
[ 5.992868] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.992891] systemd[1]: Mounted Debug File System.
[ 6.063056] lp: driver loaded but no devices found
[ 6.098563] ppdev: user-space parallel port driver
[ 6.133019] systemd[1]: Started Load Kernel Modules.
[ 6.133866] systemd[1]: Starting Apply Kernel Variables...
[ 6.134741] systemd[1]: Mounting FUSE Control File System...
[ 6.143500] systemd[1]: Mounted FUSE Control File System.
[ 6.260602] systemd[1]: Started Journal Service.
[ 6.267854] RPC: Registered named UNIX socket transport module.
[ 6.267859] RPC: Registered udp transport module.
[ 6.267860] RPC: Registered tcp transport module.
[ 6.267862] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.492483] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 9.672833] systemd-journald[273]: Received request to flush runtime journal from PID 1
[ 10.181830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.340859] intel_rng: FWH not detected
[ 10.516214] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[ 10.516224] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.516277] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.628274] leds_ss4200: no LED devices found
[ 10.635238] coretemp coretemp.0: Using relative temperature scale!
[ 10.930758] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
[ 10.930762] PCI: setting IRQ 5 as level-triggered
[ 11.079562] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.079569] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.079572] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.079574] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.079577] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 11.079579] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.079582] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 11.079585] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 11.079588] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 11.093374] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 11.093466] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 11.093546] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 12.871418] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 13.070609] Adding 1023996k swap on /dev/sdb2. Priority:-1 extents:1 across:1023996k FS
[ 14.130652] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 15.503018] audit: type=1400 audit(1485498489.973:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=740 comm="apparmor_parser"
[ 15.503031] audit: type=1400 audit(1485498489.973:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=740 comm="apparmor_parser"
[ 15.531586] audit: type=1400 audit(1485498490.001:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=741 comm="apparmor_parser"
[ 15.531601] audit: type=1400 audit(1485498490.001:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=741 comm="apparmor_parser"
[ 15.531609] audit: type=1400 audit(1485498490.001:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=741 comm="apparmor_parser"
[ 15.531615] audit: type=1400 audit(1485498490.001:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=741 comm="apparmor_parser"
[ 15.680179] audit: type=1400 audit(1485498490.153:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=742 comm="apparmor_parser"
[ 15.680207] audit: type=1400 audit(1485498490.153:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=742 comm="apparmor_parser"
[ 15.680216] audit: type=1400 audit(1485498490.153:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=742 comm="apparmor_parser"
[ 15.680223] audit: type=1400 audit(1485498490.153:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=742 comm="apparmor_parser"
[ 21.998169] IPv6: ADDRCONF(NETDEV_UP): enp3s1: link is not ready
[ 21.999246] enp3s1: setting full-duplex.
[ 22.024743] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 22.025032] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 289.379338] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 438.214812] perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 3237.476383] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 5058.647093] usb 1-4: USB disconnect, device number 3
[ 5110.795075] FS-Cache: Loaded
[ 5110.844942] FS-Cache: Netfs 'nfs' registered for caching
[ 5110.889464] NFS: Registering the id_resolver key type
[ 5110.889480] Key type id_resolver registered
[ 5110.889482] Key type id_legacy registered
[ 5154.520032] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 5154.653284] usb 1-1: New USB device found, idVendor=0bc2, idProduct=3312
[ 5154.653292] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5154.653301] usb 1-1: Product: Expansion Desk
[ 5154.653304] usb 1-1: Manufacturer: Seagate
[ 5154.653306] usb 1-1: SerialNumber: NA4KX31S
[ 5154.655637] scsi host6: uas
[ 5154.658917] scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 0739 PQ: 0 ANSI: 6
[ 5154.661251] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 5154.712936] sd 6:0:0:0: [sda] Spinning up disk...
[ 5160.188030] ......ready
[ 5165.465549] sd 6:0:0:0: [sda] 732566645 4096-byte logical blocks: (3.00 TB/2.73 TiB)
[ 5165.466911] sd 6:0:0:0: [sda] Write Protect is off
[ 5165.466918] sd 6:0:0:0: [sda] Mode Sense: 2b 00 10 08
[ 5165.469101] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5165.562591] sda: sda1
[ 5165.583668] sd 6:0:0:0: [sda] Attached SCSI disk
[ 5166.467600] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[104405.971468] show_signal_msg: 39 callbacks suppressed
[104405.971475] plugin-containe[24373]: segfault at 3be4f50953c4 ip 00007f15c3d23522 sp 00007fffac364c28 error 6 in libflashplayer.so[7f15c36b2000+107b000]
[106094.284799] QXcbEventReader[28378]: segfault at 7f4135b98629 ip 00007f4135b98629 sp 00007f4132de1e20 error 14 in locale-archive[7f4135c48000+2dd000]
[108644.023818] systemd[1]: snapd.refresh.timer: Adding 3h 10min 36.566192s random time.
[108646.961271] systemd[1]: snapd.refresh.timer: Adding 4h 23min 30.537457s random time.
[108654.902027] systemd[1]: apt-daily.timer: Adding 48min 33.231083s random time.
[108655.100728] systemd[1]: apt-daily.timer: Adding 2h 58min 58.164464s random time.
[108655.100826] systemd[1]: Started CUPS Scheduler.
[108655.101367] systemd[1]: Started ACPI event daemon.
[108655.303125] systemd[1]: apt-daily.timer: Adding 4h 58min 3.497194s random time.
[108655.303223] systemd[1]: Started CUPS Scheduler.
[108655.303771] systemd[1]: Started ACPI event daemon.
[108655.504618] systemd[1]: apt-daily.timer: Adding 3h 3min 44.118161s random time.
[108655.504719] systemd[1]: Started CUPS Scheduler.
[108655.505268] systemd[1]: Started ACPI event daemon.
[108655.703628] systemd[1]: apt-daily.timer: Adding 4h 40min 14.206991s random time.
[108655.703731] systemd[1]: Started CUPS Scheduler.
[108655.704488] systemd[1]: Started ACPI event daemon.
[108655.901517] systemd[1]: apt-daily.timer: Adding 8h 5min 48.448758s random time.
[108655.901618] systemd[1]: Started CUPS Scheduler.
[108655.902163] systemd[1]: Started ACPI event daemon.
[108702.649756] audit: type=1400 audit(1485607175.529:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=31438 comm="apparmor_parser"
[108702.650174] audit: type=1400 audit(1485607175.529:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=31438 comm="apparmor_parser"
[108704.395179] systemd[1]: apt-daily.timer: Adding 8h 31min 25.095830s random time.
[108704.660728] systemd[1]: snapd.refresh.timer: Adding 1h 46min 52.899854s random time.
[108704.660856] systemd[1]: apt-daily.timer: Adding 3h 22min 23.222834s random time.
[108704.931391] systemd[1]: snapd.refresh.timer: Adding 4h 13min 27.992670s random time.
[108704.931523] systemd[1]: apt-daily.timer: Adding 8h 38min 31.588530s random time.
[108705.226213] systemd[1]: snapd.refresh.timer: Adding 58min 24.068379s random time.
[108705.226343] systemd[1]: apt-daily.timer: Adding 3h 15min 6.343337s random time.
[119132.152033] usb 1-4: new high-speed USB device number 6 using ehci-pci
[119132.285756] usb 1-4: New USB device found, idVendor=10d6, idProduct=1101
[119132.285763] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[119132.285768] usb 1-4: Product: HS USB FlashDisk
[119132.285772] usb 1-4: Manufacturer: ACTIONS
[119132.285776] usb 1-4: SerialNumber: ㉕捤稰眷㕳愳㤷湲
[119132.286218] usb-storage 1-4:1.0: USB Mass Storage device detected
[119132.286329] scsi host7: usb-storage 1-4:1.0
[119133.289798] scsi 7:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[119133.292698] sd 7:0:0:0: Attached scsi generic sg3 type 0
[119133.293413] sd 7:0:0:0: [sdc] 8097536 1024-byte logical blocks: (8.29 GB/7.72 GiB)
[119133.293904] sd 7:0:0:0: [sdc] Write Protect is off
[119133.293910] sd 7:0:0:0: [sdc] Mode Sense: 00 c0 00 00
[119133.294401] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[119133.298685] sdc: sdc1
[119133.301288] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[136349.534969] usb 1-4: USB disconnect, device number 6
[136349.600510] FAT-fs (sdc1): unable to read boot sector to mark fs as dirty
[136349.788110] usb 1-4: new high-speed USB device number 7 using ehci-pci
[136349.933004] usb 1-4: New USB device found, idVendor=10d6, idProduct=1101
[136349.933010] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[136349.933013] usb 1-4: Product: HS USB FlashDisk
[136349.933016] usb 1-4: Manufacturer: ACTIONS
[136349.933018] usb 1-4: SerialNumber: ㉕捤稰眷㕳愳㤷湲
[136349.934958] usb-storage 1-4:1.0: USB Mass Storage device detected
[136349.935184] scsi host8: usb-storage 1-4:1.0
[136350.937830] scsi 8:0:0:0: Direct-Access ACTIONS HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[136350.940775] sd 8:0:0:0: Attached scsi generic sg3 type 0
[136350.941273] sd 8:0:0:0: [sdc] 8097536 1024-byte logical blocks: (8.29 GB/7.72 GiB)
[136350.941816] sd 8:0:0:0: [sdc] Write Protect is off
[136350.941822] sd 8:0:0:0: [sdc] Mode Sense: 00 c0 00 00
[136350.942309] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[136350.947091] sdc: sdc1
[136350.949693] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[136352.346092] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[144258.216417] usb 1-4: USB disconnect, device number 7moko138 a écrit :
3)
Donc ça fait perdre du temps et ce n'est pas cool.
Là encore, tu as raison, donc je te propose de suspendre ce débat que nous reprendrons mieux après nous être aéré les méninges et les poumons.
#1065 Le 29/01/2017, à 20:04
- PPdM
Re : Topic des lève-tôt [partie 12]
moko, tu n'as pas répondu a ma question , veux tu un bon pc ?
La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera
Hors ligne
#1066 Le 29/01/2017, à 20:22
- moko138
Re : Topic des lève-tôt [partie 12]
PPdM a écrit :
moko, tu n'as pas répondu a ma question , veux tu un bon pc ?
Je te remercie encore, PPdM, mais je t'ai répondu en ./viewtopic.php?pid=21670847#p21670847, et même, quand je me suis rendu compte que nous avions posté à 8 secondes d'écart, et que ça pouvait être source de malentendus, je te l'ai signalé : ./viewtopic.php?pid=21670868#p21670868.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1067 Le 29/01/2017, à 20:28
- jeange
Re : Topic des lève-tôt [partie 12]
moko adore les tours infernales et aussi les CPOQ. 
CLEVO W670SZQ SSD 480Go i3 Ram 12Go Ubuntu 22.04.4 et 24.04.1 LTS 64bit
Thinkpad X270 nvme 128Go i5 Ram 8Go Ubuntu 24.04 LTS 64bit et W10
Merci de donner les retours avec les balises < > et les allers avec les valises, et toujours pas de raton laveur.
%NOINDEX%
Hors ligne
#1068 Le 29/01/2017, à 20:36
- PPdM
Re : Topic des lève-tôt [partie 12]
moko138 a écrit :
PPdM a écrit :moko, tu n'as pas répondu a ma question , veux tu un bon pc ?
Je te remercie encore, PPdM, mais je t'ai répondu en ./viewtopic.php?pid=21670847#p21670847, et même, quand je me suis rendu compte que nous avions posté à 8 secondes d'écart, et que ça pouvait être source de malentendus, je te l'ai signalé : ./viewtopic.php?pid=21670868#p21670868.
VU
Mais j'ai dis: un bon PC pas deux vielles merde !!!
La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera
Hors ligne
#1069 Le 29/01/2017, à 21:15
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
moko138 n'aime que les PC qui font au moins 100 watts à la prise ! (humour noir)
Le Raspberry Pi2 ne fait que 2 watts à 4 watts, ce n'est pas assez pour moko138 :'(
Du coup, le pauvre RPi2 est resté inopérant… :"(
#1070 Le 29/01/2017, à 21:27
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
Le jour où ce sont les GigaHertz qui feront la performance d'un ordinateur, alors peut-être que la NASA et l'ESA (Agence Spatiale Européenne) utiliseront des processeurs avec des fréquences d'horloges supérieures à 150 MHz.
150 MHz seulement pensent les gens ? Oui mais 150 MHz en 128 bits, c'est suffisant…
Dernière modification par Compte supprimé (Le 29/01/2017, à 22:47)
#1071 Le 29/01/2017, à 23:47
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
Il va falloir ouvrir un bogue pour systemd !
Systemd doit se substituer à Upstart "qui est lent".
C'est loupé, les ordinateur mettent 4 à 8 fois plus de temps pour démarrer avec Systemd sur mes ordinateurs, et comment ça se passent sur vos machines ?
#1072 Le 30/01/2017, à 06:17
- moko138
Re : Topic des lève-tôt [partie 12]
Bonjour et bonne semaine ! 
- -
L_d_v_c@ a écrit :
Il va falloir ouvrir un bogue pour systemd !
Systemd doit se substituer à Upstart "qui est lent".
C'est loupé, les ordinateur mettent 4 à 8 fois plus de temps pour démarrer avec Systemd sur mes ordinateurs, et comment ça se passent sur vos machines ?
Comme je lis les demandes d'aide, je suis soigneusement resté aux deux LTS précédentes
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1073 Le 30/01/2017, à 06:18
- moko138
Re : Topic des lève-tôt [partie 12]
PPdM a écrit :
VU
Mais j'ai dis: un bon PC pas deux vielles merde !!!
Oh Boudiou ! Tu me tentes...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#1074 Le 30/01/2017, à 07:24
- Compte supprimé
Re : Topic des lève-tôt [partie 12]
Bonjour à tous !
----
Merci moko138
#1075 Le 30/01/2017, à 07:27
- moko138
Re : Topic des lève-tôt [partie 12]
Merci de... ? De t'avoir répondu ?
Ce n'est pourtant pas extraordinaire ! 
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne