#1 Le 07/06/2017, à 16:44
- Petiot2B
Installation deuxième disque dur interne-Résolu
Bonjour !
Mon ordinateur possède deux disques dur de 120 Go chacun. J'étais récemment en dual-boot, Windows 7 sur un disque et Kubuntu 14.04 sur l'autre.
N'utilisant plus Windows, j'ai décidé de ne garder que Kubuntu. L'installation s'est passée à peu près sans souci. Mais maintenant, je n'arrive pas à utiliser le deuxième disque car je n'arrive pas à le "monter".
Comment faire ? Vaut-il mieux le formater en ext 4 comme l'autre ou en NTFS N? Quel point de montage faut-il mettre pour l'utiliser comme stockage (documents, images, vidéos, fichiers divers, ...) ?
Si je dois repasser par une installation complète, ce n'est pas un souci. Mais je ne suis pas un dieu en informatique : donc explications simples, s'il vous plaît.
Je rappelle : je travaille sous Kubuntu 14.04; j'ai un disque dur avec le système installé sur une partition du disque 1, le home sur une autre partition du disque 1 et le swap sur une troisième partition du disque 1.
Je n'arrive pas à accéder au disque 2.
Merci.
Dernière modification par Petiot2B (Le 12/06/2017, à 13:35)
Hors ligne
#2 Le 07/06/2017, à 18:15
- ??
Re : Installation deuxième disque dur interne-Résolu
Bonjour
Peux-tu faire un rapport bisnext car ce n'est pas normal que tu ne puisses accéder à ton second disque.
Toutes ses partitions devront être supprimées et remplacées par une unique partition au format ext4
que tu pourras éventuellement monter en automatique sur un point de montage /DATA ou /home/$USER/DATA
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#3 Le 08/06/2017, à 08:17
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Bonjour et merci pour la réponse rapide.
Je pense savoir d'où vient le problème, mais je ne sais pas le résoudre.
J'ai été obligé de réinstaller mon système. J'ai donc mis Kubuntu 14.04, le "home" et le "swap" sur sda 1. Mais quand il a fallu mettre un point de montage sur sdb 1 (mon second disque dur), je n'ai pas su quoi mettre. J'ai mis "home", mais le système a refusé car "home" était déjà présent sur sda 1.
J'ai donc formaté en ext 4 sans mettre de point de montage en pensant résoudre le problème une fois l'installation finie. C'est peut-être possible, mais je ne sais pas faire.
Mon disque dur sdb 1 est visible, je peux le reformater, mais je ne peux pas écrire dessus. Il n'est pas monter.
Ci-joint le rapport bisnext demandé (j'espère que c'est bien ça, car je n'y connais pas grand chose; j'ai suivi les instructions sur l'aide Ubuntu).
A bientôt.
Jun 8 2017, bisnext report id b2227 also available at https://paste.debian.net/970564/
C'est juste le lien car je n'arrive pas à mettre le dossier en pièce-jointe. Désolé !
Hors ligne
#4 Le 08/06/2017, à 08:44
- malbo
Re : Installation deuxième disque dur interne-Résolu
Ton rapport Bisnext est là :
Posting 970564 from bn-b2227 posted at 2017-06-08 06:59:18 expires: 2017-07-08 06:59:18
Jun 8, 2017, bisnext report id b2227
bisnext 0.03
============================ Hardware and System Summary ======================
System: Kernel: 3.13.0-119-generic x86_64 (64 bit gcc: 4.8.4)
Desktop: N/A dm: lightdm Distro: Ubuntu 14.04.5 LTS
Machine: Device: desktop System: Gigabyte product: N/A Chassis: type: 3
Mobo: Gigabyte model: H77-D3H v: x.x
UEFI: American Megatrends v: F11 date: 08/21/2012
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-3570 (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27137
clock speeds: min/max: 1600/3801 MHz 1: 1600 MHz 2: 1600 MHz
3: 1600 MHz 4: 1600 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: No Module Installed type: N/A
Device-2: ChannelA-DIMM1 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: Kingston part: KHX1600C9D3/4GX
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: Kingston part: KHX1600C9D3/4GX
Graphics: Card: NVIDIA GT218 [GeForce 210] bus-ID: 01:00.0 chip-ID: 10de:0a65
Display Server: X.Org 1.15.1 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
tty size: 1920x1080@60.0hz
GLX Renderer: GeForce 210/PCIe/SSE2
GLX Version: 3.3.0 NVIDIA 340.102 Direct Rendering: Yes
Audio: Card-1 Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
Card-2 NVIDIA High Definition Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0be3
Sound: Advanced Linux Sound Architecture v: k3.13.0-119-generic
Network: Card: Qualcomm Atheros AR8161 Gigabit Ethernet
driver: alx port: d000 bus-ID: 05:00.0 chip-ID: 1969:1091
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 240.1GB (20.8% used)
ID-1: /dev/sda model: WDC_WD1200JS size: 120.0GB
ID-2: /dev/sdb model: WDC_WD1200JS size: 120.0GB
Optical: /dev/sr0 model: TSST CDDVDW SH-224DB
rev: SB00 dev-links: cdrom
Features: speed: 48x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 37G used: 6.0G (18%) fs: ext4 dev: /dev/sda2
label: N/A uuid: 16ba472e-46c9-48e6-8048-49e2367eff4c
ID-2: /home size: 72G used: 39G (58%) fs: ext4 dev: /dev/sda3
label: N/A uuid: 1e898fa2-cb5a-4265-9e9a-b95b319652b9
ID-3: /boot/efi size: 37M used: 7.1M (20%) fs: vfat dev: /dev/sda1
label: N/A uuid: 8FBD-0E7A
ID-4: /media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0 size: 110G used: 60M (1%) fs: ext4 dev: /dev/sdb1
label: N/A uuid: 5a43c265-125e-4b0e-ba2e-b44cb15784f0
ID-5: swap-1 size: 1.99GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
label: N/A uuid: 0cbd3bf7-79c8-4d37-83a2-f4cb3473bfad
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb-src http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-boot-repair-trusty.list
deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu trusty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 6.6% command: firefox pid: 2490 mem: 206.89MB (2.6%)
2: cpu: 4.6% command: thunderbird pid: 2154 mem: 224.59MB (2.8%)
3: cpu: 1.3% command: X pid: 1075 mem: 100.75MB (1.2%)
4: cpu: 1.0% command: kwin pid: 1970 mem: 98.15MB (1.2%)
5: cpu: 0.9% command: konsole pid: 2787 mem: 28.75MB (0.3%)
6: cpu: 0.5% command: bash pid: 3503 mem: 2.88MB (0.0%)
7: cpu: 0.3% command: plasma-desktop pid: 1988 mem: 131.85MB (1.6%)
8: cpu: 0.1% daemon: ~kworker/u9:2~ pid: 2670 mem: 0.00MB (0.0%)
9: cpu: 0.1% command: kdeinit4: pid: 1931 mem: 174.86MB (2.2%)
10: cpu: 0.0% command: sed pid: 3550 mem: 0.83MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 224.59MB (2.8%) command: thunderbird pid: 2154 cpu: 4.6%
2: mem: 206.89MB (2.6%) command: firefox pid: 2490 cpu: 6.6%
3: mem: 174.86MB (2.2%) command: kdeinit4: pid: 1931 cpu: 0.1%
4: mem: 131.85MB (1.6%) command: plasma-desktop pid: 1988 cpu: 0.3%
5: mem: 100.75MB (1.2%) command: X pid: 1075 cpu: 1.3%
6: mem: 98.15MB (1.2%) command: kwin pid: 1970 cpu: 1.0%
7: mem: 56.97MB (0.7%) command: krunner pid: 2035 cpu: 0.0%
8: mem: 48.63MB (0.6%) command: kdeinit4: pid: 1928 cpu: 0.0%
9: mem: 44.36MB (0.5%) command: kmix pid: 2036 cpu: 0.0%
10: mem: 34.04MB (0.4%) command: kdeinit4: pid: 1957 cpu: 0.0%
Info: Processes: 167 Uptime: 18 min Memory: 915.2/7943.7MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.12
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0002,0006,0004,0005
Boot0000* ubuntu HD(1,800,12800,8d6e6dd1-88f9-4f04-93ef-7d43c72c894e)File(\EFI\ubuntu\shimx64.efi)
Boot0002* Hard Drive BIOS(2,0,00)AMGOAMNO.........S.A.T.A. . .S.S.:. .W.D.C. .W.D.1.2.0.0.J.S.-.0.0.M.H.B.1.........................rN.D+..,.\...........P..Gd-.;.A..MQ..L.S.A.T.A. . .S.S.:. .W.D.C. .W.D.1.2.0.0.J.S.-.0.0.M.H.B.1......AMBOAMNO........m.W.D.C. .W.D.1.2.0.0.J.S.-.0.0.M.H.B.1....................A.........................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.N.A.3.M.6.4.3.1.3.5......AMBO
Boot0004* Removable Drive BIOS(1,0,00)AMGOAMNO.........G.e.n.e.r.i.c. .S.T.O.R.A.G.E. .D.E.V.I.C.E. .9.4.5.1....................A.............................L..Gd-.;.A..MQ..L.G.e.n.e.r.i.c. .S.T.O.R.A.G.E. .D.E.V.I.C.E. .9.4.5.1......AMBO
Boot0005* Network Card BIOS(6,0,00)AMGOAMNO........i.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t.........................rN.D+..,.\...........:..Gd-.;.A..MQ..L.A.t.h.e.r.o.s. .B.o.o.t. .A.g.e.n.t......AMBO
Boot0006* CD/DVD Drive BIOS(3,0,00)AMGOAMNO..........S.A.T.A. . .P.S.:. .T.S.S.T.c.o.r.p. .C.D.D.V.D.W. .S.H.-.2.........................rN.D+..,.\...........R..Gd-.;.A..MQ..L.S.A.T.A. . .P.S.:. .T.S.S.T.c.o.r.p. .C.D.D.V.D.W. .S.H.-.2......AMBO
vfat partition details:
/dev/sda1: UUID="8FBD-0E7A" TYPE="vfat"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
0b48de05c935c48c9e4a94fa820c32ba /EFI/ubuntu/grubx64.efi
ba8a7979ac57f1c0c307ef94d1020eb8 /EFI/ubuntu/MokManager.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Boot/bootx64.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Microsoft/Boot/bootmgfw.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Microsoft/Boot/bootx64.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/ubuntu/shimx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector
92574800 of the same hard drive for core.img. core.img is at this
location. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,gpt1)/boot/grub
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/shimx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/MokManager.efi
/EFI/Boot/bootx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 234,441,647 234,441,647 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 77,823 75,776 EFI System partition
/dev/sda2 77,824 78,202,879 78,125,056 Data partition (Linux)
/dev/sda3 78,202,880 230,547,455 152,344,576 Data partition (Linux)
/dev/sda4 230,547,456 234,440,703 3,893,248 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
81 têtes, 63 secteurs/piste, 45941 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 234,441,647 234,439,600 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 8FBD-0E7A vfat
/dev/sda2 16ba472e-46c9-48e6-8048-49e2367eff4c ext4
/dev/sda3 1e898fa2-cb5a-4265-9e9a-b95b319652b9 ext4
/dev/sda4 0cbd3bf7-79c8-4d37-83a2-f4cb3473bfad swap
/dev/sdb1 5a43c265-125e-4b0e-ba2e-b44cb15784f0 ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 8 08:41 ata-TSSTcorp_CDDVDW_SH-224DB_R93E68BD8004D9 -> ../../sr0
lrwxrwxrwx 1 root root 9 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3461353 -> ../../sdb
lrwxrwxrwx 1 root root 10 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3461353-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3523790 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3523790-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3523790-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3523790-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 juin 8 08:41 ata-WDC_WD1200JS-00MHB1_WD-WCANM3523790-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 juin 8 08:41 usb-Generic_STORAGE_DEVICE-0:0 -> ../../sdc
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro)
/dev/sda3 /home ext4 (rw)
/dev/sda1 /boot/efi vfat (rw)
/dev/sdb1 /media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0 ext4 (rw,nosuid,nodev,uhelper=udisks2)
__________________________=== Boot Files Content ===___________________________
__________________________ sda1/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid 16ba472e-46c9-48e6-8048-49e2367eff4c root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sda2/boot/grub/grub.cfg: ___________________________
File size: 8389, Line count: 262, Menu entries (sub entries included) : 6
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-16ba472e-46c9-48e6-8048-49e2367eff4c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16ba472e-46c9-48e6-8048-49e2367eff4c
else
search --no-floppy --fs-uuid --set=root 16ba472e-46c9-48e6-8048-49e2367eff4c
fi
linux /boot/vmlinuz-3.13.0-119-generic.efi.signed root=UUID=16ba472e-46c9-48e6-8048-49e2367eff4c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-119-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 8FBD-0E7A
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=16ba472e-46c9-48e6-8048-49e2367eff4c / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=8FBD-0E7A /boot/efi vfat defaults 0 1
# /home was on /dev/sda3 during installation
UUID=1e898fa2-cb5a-4265-9e9a-b95b319652b9 /home ext4 defaults 0 2
# swap was on /dev/sda4 during installation
UUID=0cbd3bf7-79c8-4d37-83a2-f4cb3473bfad none swap sw 0 0
UUID=8FBD-0E7A /boot/efi vfat defaults 0 1
____________________________ sda2/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
_________ Devices which don't seem to have a corresponding hard drive: _________
sdc
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-3.13.0-119-generic.efi.signed root=UUID=16ba472e-46c9-48e6-8048-49e2367eff4c ro quiet splash vt.handoff=7
_________________________ RAM usage & Free disk space _________________________
total used free shared buffers cached
Mem: 7.8G 2.1G 5.7G 43M 81M 1.1G
-/+ buffers/cache: 919M 6.9G
Swap: 1.9G 0B 1.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 37M 7.1M 30M 20% -
/dev/sda2 / ext4 37G 6.0G 29G 18% 7%
/dev/sda3 /home ext4 72G 39G 30G 58% 1%
/dev/sdb1 /media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0 ext4 110G 60M 105G 1% 1%
Swap partition for hibernation : UUID=0cbd3bf7-79c8-4d37-83a2-f4cb3473bfad
_________________________________ USB devices __________________________________
Bus 002 Device 003: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 5: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
_______________________________ Wireless Status _______________________________
None
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 13597 1 aesni_intel
aesni_intel 55624 0
aes_x86_64 17131 1 aesni_intel
alx 32452 0
bluetooth 391136 10 bnep,rfcomm
bnep 19624 2
btrfs 840248 0
coretemp 13435 0
crc32_pclmul 13113 0
crct10dif_pclmul 14289 0
cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper
drm 303102 2 nvidia
gf128mul 14951 1 lrw
ghash_clmulni_intel 13302 0
glue_helper 13990 1 aesni_intel
hfs 54677 0
hfsplus 107516 0
hid 106148 2 hid_generic,usbhid
hid_generic 12548 0
intel_powerclamp 14705 0
intel_rapl 18773 0
jfs 181348 0
kvm 455843 0
libcrc32c 12644 2 xfs,btrfs
lp 17759 0
lpc_ich 21080 0
lrw 13286 1 aesni_intel
mac_hid 13205 0
mdio 13807 1 alx
mei 82276 1 mei_me
mei_me 18627 0
minix 36140 0
msdos 17332 0
nls_iso8859_1 12713 1
ntfs 97369 0
nvidia 10565294 40
parport 42348 3 lp,ppdev,parport_pc
parport_pc 32701 0
pata_acpi 13038 0
ppdev 17671 0
qnx4 13317 0
raid6_pq 97812 1 btrfs
rfcomm 69160 0
serio_raw 13462 0
shpchp 37032 0
snd 69416 21 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
snd_hda_codec 193017 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hda_codec_hdmi 46368 4
snd_hda_codec_via 27860 1
snd_hda_intel 56611 5
snd_hwdep 13602 1 snd_hda_codec
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_rawmidi 30731 1 snd_seq_midi
snd_seq 61616 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_timer 29549 2 snd_pcm,snd_seq
soundcore 12680 1 snd
ufs 74890 0
usbhid 52659 0
usb_storage 62209 0
video 19476 0
x86_pkg_temp_thermal 14205 0
xfs 932834 0
xor 21411 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
vendor : NVIDIA Corporation
model : GT218 [GeForce 210]
modalias : pci:v000010DEd00000A65sv00001043sd000083F4bc03sc00i00
driver : nvidia-340 - distro non-free recommended
driver : nvidia-304 - distro non-free
driver : xserver-xorg-video-nouveau - distro free builtin
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
variant: latin9
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 3.13.0.119.129
linux-headers-3.13.0-119 3.13.0-119.166
linux-headers-3.13.0-119-generic 3.13.0-119.166
linux-headers-3.13.0-24 3.13.0-24.47
linux-headers-3.13.0-24-generic 3.13.0-24.47
linux-headers-generic 3.13.0.119.129
linux-image-3.13.0-119-generic 3.13.0-119.166
linux-image-3.13.0-24-generic 3.13.0-24.47
linux-image-extra-3.13.0-119-generic 3.13.0-119.166
linux-image-extra-3.13.0-24-generic 3.13.0-24.47
linux-image-generic 3.13.0.119.129
linux-signed-generic 3.13.0.119.129
linux-signed-image-3.13.0-119-generic 3.13.0-119.166
linux-signed-image-generic 3.13.0.119.129
Files in /boot directory:
abi-3.13.0-119-generic
abi-3.13.0-24-generic
config-3.13.0-119-generic
config-3.13.0-24-generic
efi
grub
initrd.img-3.13.0-119-generic
initrd.img-3.13.0-24-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-3.13.0-119-generic
System.map-3.13.0-24-generic
vmlinuz-3.13.0-119-generic
vmlinuz-3.13.0-119-generic.efi.signed
vmlinuz-3.13.0-24-generic
_________________________________ System Logs ________________________________
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xde304000 ACPI 2.0=0xde304000 SMBIOS=0xf04c0 MPS=0xfd430
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem04: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002505000) (21MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002505000-0x00000000349c6000) (804MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x00000000349c6000-0x00000000364db000) (27MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000364db000-0x0000000099642000) (1585MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000099642000-0x00000000cdbe5000) (837MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000cdbe5000-0x00000000cdbeb000) (0MB)
[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x00000000cdbeb000-0x00000000cddc1000) (1MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x00000000cddc1000-0x00000000cdee7000) (1MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000cdee7000-0x00000000d0e68000) (47MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000d0e68000-0x00000000d0e79000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000d0e79000-0x00000000d0e7d000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000d0e7d000-0x00000000d0e8d000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000d0e8d000-0x00000000d0e91000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000d0e91000-0x00000000d0ea3000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000d0ea3000-0x00000000d0ea8000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000d0ea8000-0x00000000d0eb1000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d0eb1000-0x00000000d0eb5000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000d0eb5000-0x00000000d0ec9000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000d0ec9000-0x00000000d0ed2000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000d0ed2000-0x00000000d0eeb000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000d0eeb000-0x00000000d0ef5000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000d0ef5000-0x00000000d0f31000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000d0f31000-0x00000000d0f72000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000d0f72000-0x00000000d0f73000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000d0f73000-0x00000000d0f74000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000d0f74000-0x00000000d0f75000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000d0f75000-0x00000000d0f9f000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000d0f9f000-0x00000000d0fa0000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000d0fa0000-0x00000000d0fc5000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000d0fc5000-0x00000000d0fc6000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000d0fc6000-0x00000000d0fc8000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000d0fc8000-0x00000000d0fc9000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000d0fc9000-0x00000000d0fe1000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000d0fe1000-0x00000000d0fec000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x00000000d0fec000-0x00000000d1048000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000d1048000-0x00000000d1068000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x00000000d1068000-0x00000000d1088000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000d1088000-0x00000000d1089000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x00000000d1089000-0x00000000d108a000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000d108a000-0x00000000d108c000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x00000000d108c000-0x00000000d108d000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000d108d000-0x00000000d108e000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x00000000d108e000-0x00000000d111a000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x00000000d111a000-0x00000000d1192000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x00000000d1192000-0x00000000d1194000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000d1194000-0x00000000d11a5000) (0MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x00000000d11a5000-0x00000000d11a9000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000d11a9000-0x00000000d11b9000) (0MB)
[ 0.000000] efi: mem56: type=7, attr=0xf, range=[0x00000000d11b9000-0x00000000d11bd000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x00000000d11bd000-0x00000000d11cd000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x00000000d11cd000-0x00000000d11d2000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x00000000d11d2000-0x00000000d11dd000) (0MB)
[ 0.000000] efi: mem60: type=7, attr=0xf, range=[0x00000000d11dd000-0x00000000d11e1000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x00000000d11e1000-0x00000000d11f5000) (0MB)
[ 0.000000] efi: mem62: type=7, attr=0xf, range=[0x00000000d11f5000-0x00000000d11fe000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x00000000d11fe000-0x00000000d1219000) (0MB)
[ 0.000000] efi: mem64: type=7, attr=0xf, range=[0x00000000d1219000-0x00000000d1223000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x00000000d1223000-0x00000000d12bd000) (0MB)
[ 0.000000] efi: mem66: type=7, attr=0xf, range=[0x00000000d12bd000-0x00000000d12c1000) (0MB)
[ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x00000000d12c1000-0x00000000d12d2000) (0MB)
[ 0.000000] efi: mem68: type=7, attr=0xf, range=[0x00000000d12d2000-0x00000000d12d6000) (0MB)
[ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000d12d6000-0x00000000d12e8000) (0MB)
[ 0.000000] efi: mem70: type=7, attr=0xf, range=[0x00000000d12e8000-0x00000000d12ed000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000d12ed000-0x00000000d12f6000) (0MB)
[ 0.000000] efi: mem72: type=7, attr=0xf, range=[0x00000000d12f6000-0x00000000d12fa000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000d12fa000-0x00000000d130e000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x00000000d130e000-0x00000000d1317000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000d1317000-0x00000000d1330000) (0MB)
[ 0.000000] efi: mem76: type=7, attr=0xf, range=[0x00000000d1330000-0x00000000d133a000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000d133a000-0x00000000d1381000) (0MB)
[ 0.000000] efi: mem78: type=7, attr=0xf, range=[0x00000000d1381000-0x00000000d13a1000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000d13a1000-0x00000000d13ca000) (0MB)
[ 0.000000] efi: mem80: type=7, attr=0xf, range=[0x00000000d13ca000-0x00000000d13ce000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000d13ce000-0x00000000d13df000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x00000000d13df000-0x00000000d13e3000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000d13e3000-0x00000000d13f4000) (0MB)
[ 0.000000] efi: mem84: type=7, attr=0xf, range=[0x00000000d13f4000-0x00000000d13f9000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000d13f9000-0x00000000d1403000) (0MB)
[ 0.000000] efi: mem86: type=7, attr=0xf, range=[0x00000000d1403000-0x00000000d1407000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000d1407000-0x00000000d141b000) (0MB)
[ 0.000000] efi: mem88: type=7, attr=0xf, range=[0x00000000d141b000-0x00000000d141c000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000d141c000-0x00000000d143e000) (0MB)
[ 0.000000] efi: mem90: type=7, attr=0xf, range=[0x00000000d143e000-0x00000000d143f000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000d143f000-0x00000000d14a6000) (0MB)
[ 0.000000] efi: mem92: type=7, attr=0xf, range=[0x00000000d14a6000-0x00000000d14a9000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000d14a9000-0x00000000d1555000) (0MB)
[ 0.000000] efi: mem94: type=7, attr=0xf, range=[0x00000000d1555000-0x00000000d1557000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000d1557000-0x00000000d15b0000) (0MB)
[ 0.000000] efi: mem96: type=7, attr=0xf, range=[0x00000000d15b0000-0x00000000d15b3000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000d15b3000-0x00000000d19c6000) (4MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x00000000d19c6000-0x00000000d19c7000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x00000000d19c7000-0x00000000d19fb000) (0MB)
[ 0.000000] efi: mem100: type=7, attr=0xf, range=[0x00000000d19fb000-0x00000000d19fc000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x00000000d19fc000-0x00000000d1a09000) (0MB)
[ 0.000000] efi: mem102: type=7, attr=0xf, range=[0x00000000d1a09000-0x00000000d1a0a000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000d1a0a000-0x00000000d1a87000) (0MB)
[ 0.000000] efi: mem104: type=7, attr=0xf, range=[0x00000000d1a87000-0x00000000d1a89000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x00000000d1a89000-0x00000000db5f9000) (155MB)
[ 0.000000] efi: mem106: type=7, attr=0xf, range=[0x00000000db5f9000-0x00000000db5fc000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x00000000db5fc000-0x00000000db631000) (0MB)
[ 0.000000] efi: mem108: type=7, attr=0xf, range=[0x00000000db631000-0x00000000db632000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x00000000db632000-0x00000000db636000) (0MB)
[ 0.000000] efi: mem110: type=7, attr=0xf, range=[0x00000000db636000-0x00000000db637000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000db637000-0x00000000dcff5000) (25MB)
[ 0.000000] efi: mem112: type=7, attr=0xf, range=[0x00000000dcff5000-0x00000000ddaa8000) (10MB)
[ 0.000000] efi: mem113: type=2, attr=0xf, range=[0x00000000ddaa8000-0x00000000ddab4000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000ddab4000-0x00000000ddd0e000) (2MB)
[ 0.000000] efi: mem115: type=0, attr=0xf, range=[0x00000000ddd0e000-0x00000000dde0a000) (0MB)
[ 0.000000] efi: mem116: type=0, attr=0xf, range=[0x00000000dde0a000-0x00000000de1fd000) (3MB)
[ 0.000000] efi: mem117: type=9, attr=0xf, range=[0x00000000de1fd000-0x00000000de1fe000) (0MB)
[ 0.000000] efi: mem118: type=10, attr=0xf, range=[0x00000000de1fe000-0x00000000de275000) (0MB)
[ 0.000000] efi: mem119: type=10, attr=0xf, range=[0x00000000de275000-0x00000000de315000) (0MB)
[ 0.000000] efi: mem120: type=10, attr=0xf, range=[0x00000000de315000-0x00000000de31b000) (0MB)
[ 0.000000] efi: mem121: type=10, attr=0xf, range=[0x00000000de31b000-0x00000000de323000) (0MB)
[ 0.000000] efi: mem122: type=6, attr=0x800000000000000f, range=[0x00000000de323000-0x00000000de7dd000) (4MB)
[ 0.000000] efi: mem123: type=6, attr=0x800000000000000f, range=[0x00000000de7dd000-0x00000000de99b000) (1MB)
[ 0.000000] efi: mem124: type=6, attr=0x800000000000000f, range=[0x00000000de99b000-0x00000000de99d000) (0MB)
[ 0.000000] efi: mem125: type=6, attr=0x800000000000000f, range=[0x00000000de99d000-0x00000000de9ac000) (0MB)
[ 0.000000] efi: mem126: type=6, attr=0x800000000000000f, range=[0x00000000de9ac000-0x00000000de9ae000) (0MB)
[ 0.000000] efi: mem127: type=6, attr=0x800000000000000f, range=[0x00000000de9ae000-0x00000000dea4c000) (0MB)
[ 0.000000] efi: mem128: type=5, attr=0x800000000000000f, range=[0x00000000dea4c000-0x00000000dea6a000) (0MB)
[ 0.000000] efi: mem129: type=5, attr=0x800000000000000f, range=[0x00000000dea6a000-0x00000000deae3000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000deae3000-0x00000000deae4000) (0MB)
[ 0.000000] efi: mem131: type=10, attr=0xf, range=[0x00000000deae4000-0x00000000deb27000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000deb27000-0x00000000dec97000) (1MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x00000000dec97000-0x00000000df45b000) (7MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000df45b000-0x00000000df45e000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x00000000df45e000-0x00000000df460000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x00000000df460000-0x00000000df461000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x00000000df461000-0x00000000df463000) (0MB)
[ 0.000000] efi: mem138: type=4, attr=0xf, range=[0x00000000df463000-0x00000000df471000) (0MB)
[ 0.000000] efi: mem139: type=3, attr=0xf, range=[0x00000000df471000-0x00000000df483000) (0MB)
[ 0.000000] efi: mem140: type=4, attr=0xf, range=[0x00000000df483000-0x00000000df48a000) (0MB)
[ 0.000000] efi: mem141: type=6, attr=0x800000000000000f, range=[0x00000000df48a000-0x00000000df7d9000) (3MB)
[ 0.000000] efi: mem142: type=4, attr=0xf, range=[0x00000000df7d9000-0x00000000df800000) (0MB)
[ 0.000000] efi: mem143: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f000000) (4592MB)
[ 0.000000] efi: mem144: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem145: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem146: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem147: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem148: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem149: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.135970] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.135973] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.136001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171168] SCSI subsystem initialized
[ 0.539881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.540299] efifb: probing for efifb
[ 0.540443] efifb: framebuffer at 0xf1000000, mapped to 0xffffc90004e80000, using 1920k, total 1920k
[ 0.540444] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.540445] efifb: scrolling: redraw
[ 0.540446] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.542332] fb0: EFI VGA frame buffer device
[ 0.723352] scsi0 : ata_piix
[ 0.723459] scsi1 : ata_piix
[ 0.723493] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[ 0.723495] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[ 0.879436] scsi2 : ata_piix
[ 0.879534] scsi3 : ata_piix
[ 0.879560] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[ 0.879563] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[ 0.925186] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5
[ 0.928562] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.928696] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.928788] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 0.928984] scsi 1:0:1:0: Direct-Access ATA WDC WD1200JS-00M 10.0 PQ: 0 ANSI: 5
[ 0.929106] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 0.929146] sd 1:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.932049] EFI Variables Facility v0.08 2004-May-17
[ 0.971807] sd 1:0:1:0: [sda] Attached SCSI disk
[ 1.355474] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[ 1.371854] scsi 2:0:0:0: Direct-Access ATA WDC WD1200JS-00M 10.0 PQ: 0 ANSI: 5
[ 1.371959] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.371979] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.378397] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.907690] ata4: failed to resume link (SControl 30)
[ 1.918390] ata4: SATA link down (SStatus 4 SControl 30)
[ 1.957417] scsi4 : usb-storage 2-1.5:1.0
[ 2.957838] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
[ 2.958134] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.961213] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 17.588801] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 17.588813] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 17.588815] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \LED_ 1 (20131115/utaddress-251)
[ 17.588817] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
[ 17.590685] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 19.389954] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 22.118187] init: plymouth-upstart-bridge main process (1172) terminated with status 1
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Optical Mouse id=8 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 8192 x 8192
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 60.0
1600x900 60.0
1440x900 59.9
1366x768 59.8
1280x1024 75.0 60.0
1280x800 59.8
1280x720 60.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3
640x480 75.0 72.8 59.9
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.423] (==) No Layout section. Using the first Screen section.
[ 21.423] (==) No screen section available. Using defaults.
[ 21.423] (**) |-->Screen "Default Screen Section" (0)
[ 21.423] (**) | |-->Monitor "<default monitor>"
[ 21.423] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.424] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 21.425] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 21.425] (WW) "xmir" is not to be loaded by default. Skipping.
[ 21.425] (II) LoadModule: "glx"
[ 21.425] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 21.432] (II) LoadModule: "nvidia"
[ 21.432] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 21.432] (II) LoadModule: "nouveau"
[ 21.449] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 21.455] (II) LoadModule: "modesetting"
[ 21.455] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.455] (II) LoadModule: "fbdev"
[ 21.456] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.456] (II) LoadModule: "vesa"
[ 21.456] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.456] (II) Loading sub module "fb"
[ 21.456] (II) LoadModule: "fb"
[ 21.456] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.456] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 21.456] (II) Loading sub module "wfb"
[ 21.456] (II) LoadModule: "wfb"
[ 21.457] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.457] (II) Loading sub module "ramdac"
[ 21.457] (II) LoadModule: "ramdac"
[ 21.457] (WW) Falling back to old probe method for modesetting
[ 21.457] (WW) Falling back to old probe method for fbdev
[ 21.457] (II) Loading sub module "fbdevhw"
[ 21.457] (II) LoadModule: "fbdevhw"
[ 21.457] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.457] (WW) Falling back to old probe method for vesa
[ 21.457] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.973] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 21.995] (II) UnloadModule: "nouveau"
[ 21.995] (II) UnloadModule: "modesetting"
[ 21.995] (II) UnloadModule: "fbdev"
[ 21.995] (II) UnloadModule: "vesa"
[ 22.053] (II) Loading sub module "dri2"
[ 22.053] (II) LoadModule: "dri2"
[ 22.066] (II) LoadModule: "evdev"
[ 22.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/3.13.0-119-generic/updates/dkms
Looking for nvidia modules in /lib/modules/3.13.0-119-generic/updates/dkms
Found nvidia module: nvidia_340_uvm.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Detected LTS < 14.04.5. Forcing Intel/SNA
Vendor/Device Id: 10de:a65
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-340/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
Nvidia packages and kernel files:
nvidia-340 340.102-0ubuntu0.14.04.1
nvidia-340-uvm 340.102-0ubuntu0.14.04.1
nvidia-libopencl1-340 340.102-0ubuntu0.14.04.1
nvidia-opencl-icd-340 340.102-0ubuntu0.14.04.1
nvidia-prime 0.6.2.1
nvidia-settings 331.20-0ubuntu8
bbswitch-dkms 0.7-2ubuntu1
May 3 15:51 /lib/modules/3.13.0-119-generic/kernel/drivers/video/nvidia/nvidiafb.ko
Jun 6 18:53 /lib/modules/3.13.0-119-generic/updates/dkms/nvidia_340.ko
Jun 6 18:53 /lib/modules/3.13.0-119-generic/updates/dkms/nvidia_340_uvm.ko
May 3 2014 /lib/modules/3.13.0-24-generic/kernel/drivers/video/nvidia/nvidiafb.ko
Jun 6 19:12 /lib/modules/3.13.0-24-generic/updates/dkms/nvidia_340.ko
Jun 6 19:12 /lib/modules/3.13.0-24-generic/updates/dkms/nvidia_340_uvm.ko
Jun 6 18:52 /lib/nvidia-340
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-119-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD1200JS-00MHB1
Firmware Version: 10.02E01
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Jun 8 08:59:16 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0
3 Spin_Up_Time PO---- 190 181 021 - 3466
4 Start_Stop_Count -O--CK 098 098 000 - 2122
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-- 200 200 051 - 0
9 Power_On_Hours -O--CK 097 097 000 - 2465
10 Spin_Retry_Count PO--C- 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 051 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2000
190 Airflow_Temperature_Cel -O---K 053 033 045 Past 47
194 Temperature_Celsius -O---K 100 080 000 - 47
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 200 200 000 - 0
198 Offline_Uncorrectable ----C- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-119-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD1200JS-00MHB1
Firmware Version: 10.02E01
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Jun 8 08:59:16 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 74
3 Spin_Up_Time PO---- 193 185 021 - 3316
4 Start_Stop_Count -O--CK 098 098 000 - 2069
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-- 200 200 051 - 0
9 Power_On_Hours -O--CK 096 096 000 - 3265
10 Spin_Retry_Count PO--C- 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 051 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2066
190 Airflow_Temperature_Cel -O---K 049 032 045 Past 51
194 Temperature_Celsius -O---K 096 079 000 - 51
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 200 200 000 - 0
198 Offline_Uncorrectable ----C- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
ATA Error Count: 72 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 72 occurred at disk power-on lifetime: 862 hours (35 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1b f7 0b ea Error: UNC at LBA = 0x0a0bf71b = 168556315
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 01 1b f7 0b 0a 00 00:48:35.893 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:35.893 READ DMA
40 00 02 1d f7 0b 0a 00 00:48:35.877 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:35.877 READ DMA
40 00 02 1b f7 0b 0a 00 00:48:34.013 READ VERIFY SECTOR(S)
Error 71 occurred at disk power-on lifetime: 862 hours (35 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 1b f7 0b ea Error: UNC at LBA = 0x0a0bf71b = 168556315
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 02 1b f7 0b 0a 00 00:48:34.013 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:34.013 READ DMA
40 00 04 1b f7 0b 0a 00 00:48:32.150 READ VERIFY SECTOR(S)
c8 00 01 3b bb fc 0c 00 00:48:32.150 READ DMA
40 00 04 17 f7 0b 0a 00 00:48:32.150 READ VERIFY SECTOR(S)
Error 70 occurred at disk power-on lifetime: 862 hours (35 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 1b f7 0b ea Error: UNC at LBA = 0x0a0bf71b = 168556315
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 04 1b f7 0b 0a 00 00:48:32.150 READ VERIFY SECTOR(S)
c8 00 01 3b bb fc 0c 00 00:48:32.150 READ DMA
40 00 04 17 f7 0b 0a 00 00:48:32.150 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:32.150 READ DMA
40 00 08 17 f7 0b 0a 00 00:48:30.278 READ VERIFY SECTOR(S)
Error 69 occurred at disk power-on lifetime: 862 hours (35 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 1b f7 0b ea Error: UNC at LBA = 0x0a0bf71b = 168556315
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 08 17 f7 0b 0a 00 00:48:30.278 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:30.278 READ DMA
40 00 08 0f f7 0b 0a 00 00:48:30.277 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 00 00 00:48:30.277 READ DMA
40 00 10 0f f7 0b 0a 00 00:48:28.397 READ VERIFY SECTOR(S)
Error 68 occurred at disk power-on lifetime: 862 hours (35 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1b f7 0b ea Error: UNC at LBA = 0x0a0bf71b = 168556315
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 0f f7 0b 0a 00 00:48:28.397 READ VERIFY SECTOR(S)
40 00 10 ff f6 0b 0a 00 00:48:28.397 READ VERIFY SECTOR(S)
40 00 20 1f f7 0b 0a 00 00:48:28.380 READ VERIFY SECTOR(S)
c8 00 01 3b bb fc 0c 00 00:48:28.380 READ DMA
40 00 20 ff f6 0b 0a 00 00:48:26.491 READ VERIFY SECTOR(S)
### USB disks: sdc
# Drive sdc:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-119-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error no medium present
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.Hors ligne
#5 Le 08/06/2017, à 08:54
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Merci malbo.
Je l'ai aussi sur mon ordi ce fameux Bisnext, mais je ne sais pas quoi en faire.
Est-ce que Gparted pourrait résoudre mon souci ? Avec l'éditeur de partitions installé sur Kubuntu, je n'y arrive pas.
Hors ligne
#6 Le 08/06/2017, à 08:55
- Bougron
Re : Installation deuxième disque dur interne-Résolu
Bonjour.
Tu y trouveras le point de montage standard de ton second disque.
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro)
/dev/sda3 /home ext4 (rw)
/dev/sda1 /boot/efi vfat (rw)
/dev/sdb1 /media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0 ext4 (rw,nosuid,nodev,uhelper=udisks2)Si la valeur 5a43c265-125e-4b0e-ba2e-b44cb15784f0 t'embêtes, tu peux utiliser gparted pour mettre une etiquette, un label a cette partition.
Dernière modification par Bougron (Le 08/06/2017, à 08:59)
Hors ligne
#7 Le 08/06/2017, à 09:23
- sinbad83
Re : Installation deuxième disque dur interne-Résolu
Pour monter automatiquement sdb1 au démarrage à un emplacement compréhensible, fais-le apparaître dans le fichier /etc/fstab en y ajoutant
# sdb1 on /media/DD2
UUID=5a43c265-125e-4b0e-ba2e-b44cb15784f0 /media/DD2 ext4 defaults 0 2Crée le point de montage
sudo mkdir /media/DD2Monte le total sans devoir redémarrer
sudo mount -aDernière modification par sinbad83 (Le 08/06/2017, à 10:13)
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#8 Le 08/06/2017, à 10:42
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Merci à vous deux, Bougron et sinbad83; mais sans vouloir vous vexer: j'ai rien compris à vos messages.
Comme dit dans mon premier message, je ne suis pas informaticien.
Tout ce que je peux vous dire, c'est que dans le dossier etc je n'ai pas de dossier fstab mais un dossier fstab.d et que je ne peux rien écrire dedans.
J'ai tapé les commandes décrites dans la konsole, mais rien ne se passe.
Hors ligne
#9 Le 08/06/2017, à 10:53
- Bougron
Re : Installation deuxième disque dur interne-Résolu
Rebonjour
Ton fichier fstab est bien présent autrement ubuntu ne mettrait pas en route. Tu regardes mal dans la liste
contentes-toi de faire la commande
sudo gedit /etc/fstabTu y verras son contenu.
Peux-tu aussi donner le retour de
sudo ls -Rls /media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0Quelques explications
Ceci est le point de montage standard du disque
Tu peux modifier "5a43c265-125e-4b0e-ba2e-b44cb15784f0" qui est le nom officiel du disque en y mettant une étiquette avec gparted par exemple "DD2"
Le disque sera alors monté sur
/media/patrick/DD2
Simbad83 te propose un montage automatique pour t'éviter d'avoir à cliquer sur l'icône du disque afin de provoquer son montage.
a) Il faut créer le point de montage avec la commande
sudo mkdir /media/DD2b) Il faut te rendre propriétaire du point de montage avec la commande
sudo chown $USER:$USER /media/DD2c) Il faut que tu modifies le fichier fstab pour indiquer ce point de montage.
1) Lire le fichier avec la commande
sudo gedit /etc/fstab 2) Ajouter les deux lignes indiquées par simba83 en fin de fichier
3)Sauver le fichier
4) Quitter gedit
d) Vérifier que la codification est bien bonne avec les commandes
sudo mount -a
ls -Rls /media/DD2Nota: Par la suite, lorsque tu booteras, le montage sera automatique.
Tu pourras, éventuellement; y rediriger automatiquement ton répertoireTéléchargements ou quelques autres.
Ajout: La méthode normale est de faire un copier/coller du texte affiché à l'écran.
Dernière modification par Bougron (Le 08/06/2017, à 11:16)
Hors ligne
#10 Le 08/06/2017, à 11:04
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Merci !
Désolé pour la façon, mais je ne sais pas joindre 1 fichier à mon message ni afficher une copie d'écran sur mon message. Je fais donc un copier/coller du texte.
Première commande, réponse : command not found
Deuxième commande, réponse ci-dessous :
/media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0:
total 16
16 drwx------ 2 root root 16384 juin 7 17:19 lost+found
/media/patrick/5a43c265-125e-4b0e-ba2e-b44cb15784f0/lost+found:
total 0
Hors ligne
#11 Le 08/06/2017, à 11:05
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Je dois partir.
Je reprendrais la discussion samedi.
Hors ligne
#12 Le 12/06/2017, à 13:31
- Petiot2B
Re : Installation deuxième disque dur interne-Résolu
Bonjour à tous !
J'ai résolu mon problème, au risque de faire crier les informaticiens.
Malgré vos conseils à tous, rien ne fonctionnait. Les commandes entrées dans le terminal me donnaient : "command not found"; ou "dossier inexistant" ou encore "dossier inaccessible". Ou alors rien ne se passait.
Quand aux fichiers infos sur mon système ou mes disques, je ne savais pas quoi en fairer. Désolé !
J'ai donc sauvegardé tous mes dossiers. J'ai débranché le disque dur en question (physiquement). J'ai réinstallé mon système (Kubuntu 14.04) sur 1 seul disque. Ensuite , j'ai rebranché mon deuxième disque dur. Je l'ai formaté avec le Live CD kubuntu (en prenant bien soin de mettre un point de montage cette fois, puisque grâce à vous je savais quoi mettre). J'ai redémarré mon ordi et ça fonctionne : mon second disque dur est reconnu, monter et je peux lire et écrire dessus.
Merci à tous. Je vais essayer de trouver comment on met "résolu", même si je n'ai pas utiliser la méthode la plus simple, la plus rapide et la plus orthodoxe.
A bientôt ............. peut-être.
Hors ligne