#251 Le 27/07/2017, à 14:48
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Caribou22 a écrit :
Vous allez donner raison au réparateur informatique de Pimprelune avec votre débat alors que je mettrais ma main à couper qu'il suffit de retirer la carte graphique nVidia de son ordi...
(@Pimprelune : Et je serais peut-être dispo pour venir le faire si tu es en Bretagne.)
Hahaha, ce n'était pas le réparateur (gros amoureux de Windown), juste l'employé du Franprix en face de chez moi, Caribou22.
Et tu es trop gentil de me proposer d'expertement travailler sur mon matos, mais hélas, je suis à Aix (En-Provence), pas loin de la cité phocéenne. On est près (quoi que, pas tant que ça) de la mer, mais ce n'est pas l'Atlantique
Hors ligne
#252 Le 27/07/2017, à 14:53
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Caribou22 a écrit :
Pas de surprise pour le moment. Les VGA et HDMI sont bien reliés à la carte mère.
Donc ton modèle est un Packard Bell iMedia S2870. Ne bouge pas, je t'envoie un tuto vidéo pour retirer la carte graphique ce soir.
Oui, c'est le modèle exact. Et encore merci infiniment :* :*, Caribou22, j'avoue qu'une petite vidéo me parlera plus qu'une longue explication détaillée 
.
Dernière modification par Pimprelune (Le 27/07/2017, à 14:54)
Hors ligne
#253 Le 27/07/2017, à 15:00
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Cependant, je me permets de vous informer que j'ai eu une énorme MAJ qui s'est présentée (via le Gestionnaire de MAJ), que je l'ai acceptée, et que ça va mieux (je n'ose dire que la vitesse est normale à rapide, des fois que ça me porterait la poisse) pour les ouvertures d'onglets, d'applications et tutti quanti.
Il y a quand même les liens de mes messages Thunderbird (Facebook, sites de défense animale, change.org) qui tardent à s'ouvrir, si bien que je clique encore et j'ai aussitôt deux onglets identiques qui se présentent à la suite...
Dernière modification par Pimprelune (Le 27/07/2017, à 15:36)
Hors ligne
#254 Le 27/07/2017, à 15:06
- michel_04
Re : [Abandonné] Lenteur extrême partout
Re,
Pimprelune a écrit :
Par contre, sur ton lien, ce n'est pas bon, trop grosse
Oui, j'ai vu la photo est celle d'un Acer ( PB racheté par ACer)
Comme on lit souvent : photo non contractuelle. 
dit
Comme te la dit Caribou, les connecteurs sont bien soudées à ta MB, donc utilisables.
Par acquis de conscience, tu regarderas dans ton BIOS si par hasard il n'est pas nécessaire d'activer/sélectionner la sortie vidéo.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#255 Le 27/07/2017, à 15:11
- nam1962
Re : [Abandonné] Lenteur extrême partout
Le "crac" du levier de la carte n'étant pas forcément un souci : ces machins en plastique très dur ont tendance à être bruyants quand on les change de position
Coeur Noir a écrit :
Nam, tu alourdis la discussion, bisnext n'est pas le sujet.
Bougron cherche à savoir la même chose que nous : top free dmesg quand l'ordi rame.
(...)
Ça ça a été traité dans les deux premières pages de la discussion.
Quand à bisnext, ça fait 4 pages que sa proposition vient polluer le fil..
Dernière modification par nam1962 (Le 27/07/2017, à 15:16)
[ Modéré ]
Hors ligne
#256 Le 27/07/2017, à 15:16
- michel_04
Re : [Abandonné] Lenteur extrême partout
Re,
Pimprelune a écrit :
Et tu es trop gentil de me proposer d'expertement travailler sur mon matos, mais hélas, je suis à Aix (En-Provence), pas loin de la cité phocéenne. On est près (quoi que, pas tant que ça) de la mer, mais ce n'est pas l'Atlantique
Pas trop chaud chez toi? Les flammes n'étaient pas loin. Tu as du voir la fumée!
Quand l'A51 a été coupée, je descendais à Plan de Campagne, détourné à Saint-Paul à 09h, j'ai abandonné: retour at home par Vinon.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#257 Le 27/07/2017, à 15:24
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
michel_04 a écrit :
Re,
Pimprelune a écrit :Et tu es trop gentil de me proposer d'expertement travailler sur mon matos, mais hélas, je suis à Aix (En-Provence), pas loin de la cité phocéenne. On est près (quoi que, pas tant que ça) de la mer, mais ce n'est pas l'Atlantique
Pas trop chaud chez toi? Les flammes n'étaient pas loin. Tu as du voir la fumée!
Quand l'A51 a été coupée, je descendais à Plan de Campagne, détourné à Saint-Paul à 09h, j'ai abandonné: retour at home par Vinon.A+
Non, pas vu de signaux indiens, michel_04, mais oui, j'ai vu que ça crame en Corse Grrrrrrrr 
(et dans le sud est aussi, non ?).
Il fait surtout lourd, mais chaud, ça va, l'année de la canicule, j'avais 42-46 ° dans l'appartement @0@, alors que là, je n'ai que 28, supportable 
Et Plan de Campagne, c'est une horrrrrreur, pour la chaleur : vendredi dernier, j'y cuisais malgré la brise ! Tu as bien fait d'abandonner, le coin est affreux pour la circulation (véhicules et air), michel_04.
Hors ligne
#258 Le 27/07/2017, à 15:28
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
michel_04 a écrit :
.
Par acquis de conscience, tu regarderas dans ton BIOS si par hasard il n'est pas nécessaire d'activer/sélectionner la sortie vidéo.A+
Heûûûûûû, oui, michel_04, moi et le BIOS, pas copains 
Hors ligne
#259 Le 27/07/2017, à 15:29
- michel_04
Re : [Abandonné] Lenteur extrême partout
Pimprelune a écrit :
(et dans le sud est aussi, non ?)
Ben oui! Fin juin/début juillet, suis passé voir la famille entre Giens et Bormes. Et depuis quelques jours, il y a le feu partout.
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#260 Le 27/07/2017, à 15:33
- Caribou22
Re : [Abandonné] Lenteur extrême partout
De toutes façons, le choix de la carte graphique est matériel. (S'il y a une carte graphique connectée en PCI, elle sert d'office.)
Donc je ne pense pas qu'il y ait quoi que ce soit dans le BIOS.
A défaut de pouvoir traverser la France, je te trouve un bon tuto d'ici ce soir
Hors ligne
#261 Le 27/07/2017, à 15:42
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Pour continuer dans la veine de michel_04
Ben oui! Fin juin/début juillet, suis passé voir la famille entre Giens et Bormes. Et depuis quelques jours, il y a le feu partout.
--> (Ce n'est pas joyeux du tout, toutes les années, les feux empirent, c'est dramatique dans le sud entier, ça me rend malade, michel_04.), Caribou22, y a pas l'feu au lac (Serre-Ponçon, c'est un peu loin), pour trouver le bon tuto 
!
Dernière modification par Pimprelune (Le 27/07/2017, à 15:45)
Hors ligne
#262 Le 27/07/2017, à 15:52
- Coeur Noir
Re : [Abandonné] Lenteur extrême partout
bah non nam, ça top free dmesg :
« Ça ça a été traité dans les deux premières pages de la discussion »
n'a pas été fait au moment opportun, c'est à dire quand l'ordi déconne.
Les retours ont été faits quand tout allait bien, donc forcément r.à.s.
Comme on n'a jamais eu de retour de lancement d'une appli depuis un terminal quand l'ordi rame, alors que ça a été suggéré ( sur ce fil ou l'autre ).
Donc oui statistiquement parlant une CG à driver proprio est un coupable potentiel, mais les diagnostics préalables ne sont pas faits.
Et vrai aussi que les toutes dernières m.à.j d'Ubuntu ( passées aujourd'hui chez moi ) comportaient pas mal d'éléments relatifs à la pile graphique ( mesa, xorg, intel, amd/radeon etc… )
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#263 Le 27/07/2017, à 17:28
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Comme ça "rame", je lance, Coeur Noir, tes commandes -->
pimprenelle@pimprenelle-imedia-S2870:~$ dmesg > dmesg
pimprenelle@pimprenelle-imedia-S2870:~$ free -m
total utilisé libre partagé tamp/cache disponible
Mem: 5925 3089 143 88 2692 2415
Partition d'échange: 3999 0 3999
pimprenelle@pimprenelle-imedia-S2870:~$ top
top - 19:29:22 up 4:25, 2 users, load average: 1,53, 1,06, 0,66
Tâches: 245 total, 2 en cours, 243 en veille, 0 arrêté, 0 zombie
%Cpu(s): 8,6 ut, 5,2 sy, 0,0 ni, 39,6 id, 46,5 wa, 0,0 hi, 0,2 si, 0,0 st
KiB Mem : 6067736 total, 120976 libr, 3167096 util, 2779664 tamp/cache
KiB Éch: 4095996 total, 4095996 libr, 0 util. 2470616 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4119 pimpren+ 20 0 3485888 0,996g 109924 S 11,6 17,2 62:28.33 firefox
1392 pimpren+ 20 0 2011900 159720 43572 S 9,6 2,6 9:31.87 gnome-shell
1168 pimpren+ 20 0 314072 94988 75148 R 2,7 1,6 5:32.94 Xorg
8647 pimpren+ 20 0 842548 41632 28616 S 1,7 0,7 0:02.09 gnome-docu+
4442 pimpren+ 20 0 2204688 236436 71272 S 1,3 3,9 5:45.71 thunderbird
8645 pimpren+ 20 0 674564 38624 29684 S 1,3 0,6 0:01.17 gnome-term+
7922 root 20 0 0 0 0 S 0,7 0,0 0:05.72 kworker/1:1
8783 pimpren+ 20 0 43300 3808 3148 R 0,3 0,1 0:00.26 top
1 root 20 0 120044 4952 2728 S 0,0 0,1 0:01.31 systemd
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0,0 0,0 0:00.16 ksoftirqd/0
5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:+
7 root 20 0 0 0 0 S 0,0 0,0 0:16.86 rcu_sched
8 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_bh
9 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0
10 root rt 0 0 0 0 S 0,0 0,0 0:00.04 watchdog/0
11 root rt 0 0 0 0 S 0,0 0,0 0:00.04 watchdog/1
pimprenelle@pimprenelle-imedia-S2870:~$ Hors ligne
#264 Le 27/07/2017, à 17:34
- nam1962
Re : [Abandonné] Lenteur extrême partout
Quelles sont tes extensions Firefox ?
Ta box est-elle régulièrement redémarrée ?
Dernière modification par nam1962 (Le 27/07/2017, à 17:34)
[ Modéré ]
Hors ligne
#265 Le 27/07/2017, à 17:43
- moko138
Re : [Abandonné] Lenteur extrême partout
~$ dmesg > dmesg
Donc maintenant fais-nous voir le contenu du fichier dmesg que tu viens de créer !
A priori, les 300 dernières lignes devraient suffire :
cat ~/dmesg | tail -300%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#266 Le 27/07/2017, à 18:04
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
Quelles sont tes extensions Firefox ?
Ta box est-elle régulièrement redémarrée ?
Extensions --> 
(Plus un VPN...)
Il faut redémarrer la Box régulièrement, nam1962 ? C'est une blague, Hein ??
Et je vous déballe le tout, moko138 (concernant le fichier dmesg), car - pour simplifier les choses - le Ctrl + A ne fonctionne pas (mais c'est partout sur le PC, alors... (désabusée)) -->
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-87-generic (buildd@lcy01-31) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #110-Ubuntu SMP Tue Jul 18 12:55:35 UTC 2017 (Ubuntu 4.4.0-87.110-generic 4.4.73)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-87-generic.efi.signed root=UUID=0b04600c-895e-433b-9a8d-2a244f1b83b9 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dde04fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dde05000-0x00000000ddeb0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddeb1000-0x00000000ddec1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddec2000-0x00000000de74cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de74d000-0x00000000deccbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deccc000-0x00000000ded9bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ded9c000-0x00000000ded9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ded9d000-0x00000000deddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dede0000-0x00000000df59bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df59c000-0x00000000df7f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f1000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Acer Inc.
[ 0.000000] efi: ACPI=0xddeb4000 ACPI 2.0=0xddeb4000 SMBIOS=0xdecca498
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Packard Bell imedia S2870/imedia S2870, BIOS P11-A2 01/22/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FF0000000 write-back
[ 0.000000] 3 base 190000000 mask FF8000000 write-back
[ 0.000000] 4 base 198000000 mask FFC000000 write-back
[ 0.000000] 5 base 19C000000 mask FFE000000 write-back
[ 0.000000] 6 base 19E000000 mask FFF000000 write-back
[ 0.000000] 7 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 6GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 6400MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 6528MB, range: 64MB, type WB
[ 0.000000] reg 5, base: 6592MB, range: 32MB, type WB
[ 0.000000] reg 6, base: 6624MB, range: 16MB, type WB
[ 0.000000] reg 7, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 6128M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 6640MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3357e000-0x35ab6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DDEB4000 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000DDEB4080 00007C (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDEBF998 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDEB4188 00B80A (v02 ACRSYS ACRPRDCT 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DE74B080 000040
[ 0.000000] ACPI: APIC 0x00000000DDEBFAA8 000062 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDEBFB10 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000DDEBFB58 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MCFG 0x00000000DDEBFC00 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000DDEBFC40 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000DDEBFC98 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDEBFCD0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DDEC0040 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDEC0968 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000DDEC1400 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x19eff4000-0x19eff8fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000019effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dde04fff]
[ 0.000000] node 0: [mem 0x00000000ded9c000-0x00000000ded9cfff]
[ 0.000000] node 0: [mem 0x00000000dede0000-0x00000000df59bfff]
[ 0.000000] node 0: [mem 0x00000000df7f1000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000019effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff]
[ 0.000000] On node 0 totalpages: 1561966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14168 pages used for memmap
[ 0.000000] DMA32 zone: 906705 pages, LIFO batch:31
[ 0.000000] Normal zone: 10176 pages used for memmap
[ 0.000000] Normal zone: 651264 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdde05000-0xddeb0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddeb1000-0xddec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddec2000-0xde74cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde74d000-0xdeccbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdeccc000-0xded9bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xded9d000-0xdeddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf59c000-0xdf7f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88019ec00000 s98264 r8192 d28712 u1048576
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1537534
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-87-generic.efi.signed root=UUID=0b04600c-895e-433b-9a8d-2a244f1b83b9 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5975244K/6247864K available (8474K kernel code, 1293K rwdata, 3984K rodata, 1488K init, 1316K bss, 272620K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.584 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.16 BogoMIPS (lpj=11574336)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20150930
[ 0.005746] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.006576] Security Framework initialized
[ 0.006578] Yama: becoming mindful.
[ 0.006590] AppArmor: AppArmor initialized
[ 0.006991] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008658] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009423] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009431] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009610] Initializing cgroup subsys io
[ 0.009613] Initializing cgroup subsys memory
[ 0.009619] Initializing cgroup subsys devices
[ 0.009621] Initializing cgroup subsys freezer
[ 0.009623] Initializing cgroup subsys net_cls
[ 0.009625] Initializing cgroup subsys perf_event
[ 0.009627] Initializing cgroup subsys net_prio
[ 0.009629] Initializing cgroup subsys hugetlb
[ 0.009631] Initializing cgroup subsys pids
[ 0.009649] CPU: Physical Processor ID: 0
[ 0.009650] CPU: Processor Core ID: 0
[ 0.009654] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009655] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009657] mce: CPU supports 7 MCE banks
[ 0.009667] CPU0: Thermal monitoring enabled (TM1)
[ 0.009673] process: using mwait in idle threads
[ 0.009676] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009677] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.010045] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
[ 0.013198] ftrace: allocating 32128 entries in 126 pages
[ 0.025989] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.025990] smpboot: Max logical packages: 1
[ 0.026396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066086] TSC deadline timer enabled
[ 0.066089] smpboot: CPU0: Intel(R) Pentium(R) CPU G2020 @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.066106] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.066123] ... version: 3
[ 0.066124] ... bit width: 48
[ 0.066124] ... generic registers: 8
[ 0.066125] ... value mask: 0000ffffffffffff
[ 0.066126] ... max period: 00007fffffffffff
[ 0.066127] ... fixed-purpose events: 3
[ 0.066127] ... event mask: 00000007000000ff
[ 0.066789] x86: Booting SMP configuration:
[ 0.066791] .... node #0, CPUs: #1
[ 0.067317] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.069397] x86: Booted up 1 node, 2 CPUs
[ 0.069399] smpboot: Total of 2 processors activated (11574.33 BogoMIPS)
[ 0.069429] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070763] devtmpfs: initialized
[ 0.072774] evm: security.selinux
[ 0.072775] evm: security.SMACK64
[ 0.072776] evm: security.SMACK64EXEC
[ 0.072776] evm: security.SMACK64TRANSMUTE
[ 0.072777] evm: security.SMACK64MMAP
[ 0.072778] evm: security.ima
[ 0.072778] evm: security.capability
[ 0.072832] PM: Registering ACPI NVS region [mem 0xddec2000-0xde74cfff] (8957952 bytes)
[ 0.072913] PM: Registering ACPI NVS region [mem 0xded9d000-0xdeddffff] (274432 bytes)
[ 0.072975] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072984] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.073050] pinctrl core: initialized pinctrl subsystem
[ 0.073153] RTC time: 13:04:21, date: 07/27/17
[ 0.073240] NET: Registered protocol family 16
[ 0.077396] cpuidle: using governor ladder
[ 0.089397] cpuidle: using governor menu
[ 0.089401] PCCT header not found.
[ 0.089494] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.089495] ACPI: bus type PCI registered
[ 0.089497] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.089554] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.089556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.089564] PCI: Using configuration type 1 for base access
[ 0.089646] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089652] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.101710] ACPI: Added _OSI(Module Device)
[ 0.101711] ACPI: Added _OSI(Processor Device)
[ 0.101712] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101713] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103805] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.105867] ACPI: Dynamic OEM Table Load:
[ 0.105872] ACPI: SSDT 0xFFFF8801973B8000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.106273] ACPI: Dynamic OEM Table Load:
[ 0.106276] ACPI: SSDT 0xFFFF880196D29000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.106620] ACPI: Dynamic OEM Table Load:
[ 0.106623] ACPI: SSDT 0xFFFF880196D24A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.107035] ACPI: Interpreter enabled
[ 0.107050] ACPI: (supports S0 S3 S4 S5)
[ 0.107052] ACPI: Using IOAPIC for interrupt routing
[ 0.107072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112365] ACPI: Power Resource [FN00] (off)
[ 0.112430] ACPI: Power Resource [FN01] (off)
[ 0.112493] ACPI: Power Resource [FN02] (off)
[ 0.112555] ACPI: Power Resource [FN03] (off)
[ 0.112615] ACPI: Power Resource [FN04] (off)
[ 0.112996] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.113000] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.113186] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.113291] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.113292] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.113595] PCI host bridge to bus 0000:00
[ 0.113598] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.113599] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.113601] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.113602] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.113603] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.113604] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.113606] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.113607] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.113608] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.113609] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.113611] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.113612] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.113613] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.113614] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.113615] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.113617] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.113618] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.113624] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.113704] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.113731] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.113766] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.113824] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.113856] pci 0000:00:16.0: reg 0x10: [mem 0xf712b000-0xf712b00f 64bit]
[ 0.113917] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.113991] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.114016] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.114024] pci 0000:00:19.0: reg 0x14: [mem 0xf7129000-0xf7129fff]
[ 0.114033] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.114081] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.114118] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.114154] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.114180] pci 0000:00:1a.0: reg 0x10: [mem 0xf7128000-0xf71283ff]
[ 0.114250] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.114302] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.114337] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.114361] pci 0000:00:1b.0: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[ 0.114412] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114453] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.114489] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.114516] pci 0000:00:1d.0: reg 0x10: [mem 0xf7127000-0xf71273ff]
[ 0.114586] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.114634] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.114670] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.114831] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.114854] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.114860] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.114868] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.114876] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.114883] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.114890] pci 0000:00:1f.2: reg 0x24: [mem 0xf7126000-0xf71267ff]
[ 0.114921] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.114982] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.114997] pci 0000:00:1f.3: reg 0x10: [mem 0xf7125000-0xf71250ff 64bit]
[ 0.115017] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.115125] pci 0000:01:00.0: [10de:1048] type 00 class 0x030000
[ 0.115141] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.115149] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.115158] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.115163] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.115169] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.115229] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.115243] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.122687] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122691] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.122694] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.122699] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.123208] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123300] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123387] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123430] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123517] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123724] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.123830] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.123832] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123833] vgaarb: loaded
[ 0.123834] vgaarb: bridge control possible 0000:01:00.0
[ 0.124017] SCSI subsystem initialized
[ 0.124048] libata version 3.00 loaded.
[ 0.124066] ACPI: bus type USB registered
[ 0.124079] usbcore: registered new interface driver usbfs
[ 0.124085] usbcore: registered new interface driver hub
[ 0.124093] usbcore: registered new device driver usb
[ 0.124228] PCI: Using ACPI for IRQ routing
[ 0.125747] PCI: pci_cache_line_size set to 64 bytes
[ 0.125781] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.125782] e820: reserve RAM buffer [mem 0xdde05000-0xdfffffff]
[ 0.125784] e820: reserve RAM buffer [mem 0xded9d000-0xdfffffff]
[ 0.125785] e820: reserve RAM buffer [mem 0xdf59c000-0xdfffffff]
[ 0.125786] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.125787] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
[ 0.125885] NetLabel: Initializing
[ 0.125886] NetLabel: domain hash size = 128
[ 0.125887] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.125897] NetLabel: unlabeled traffic allowed by default
[ 0.125960] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.125964] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.127980] amd_nb: Cannot enumerate AMD northbridges
[ 0.127992] clocksource: Switched to clocksource hpet
[ 0.132763] AppArmor: AppArmor Filesystem Enabled
[ 0.132824] pnp: PnP ACPI init
[ 0.132907] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.132911] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.132978] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.132980] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.132982] system 00:01: [io 0xffff] has been reserved
[ 0.132983] system 00:01: [io 0xffff] has been reserved
[ 0.132985] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.132986] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.132988] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.132989] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.132991] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133012] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133048] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.133051] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.133145] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.133146] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.133148] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.133150] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133291] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.133293] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133341] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.133526] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.133528] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.133529] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.133531] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.133532] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.133533] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.133535] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.133536] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.133538] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.133539] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.133541] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.133543] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133663] pnp: PnP ACPI: found 8 devices
[ 0.139826] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.139838] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.139841] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.139843] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.139845] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.139849] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.139851] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.139852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.139853] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.139855] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.139856] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.139857] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.139858] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.139860] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.139861] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.139862] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.139863] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.139865] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.139866] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.139867] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.139868] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xfeafffff window]
[ 0.139870] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.139871] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.139872] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.139898] NET: Registered protocol family 2
[ 0.140022] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.140124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.140237] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.140256] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.140277] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.140325] NET: Registered protocol family 1
[ 0.180119] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.180127] PCI: CLS 64 bytes, default 64
[ 0.180175] Unpacking initramfs...
[ 0.659001] Freeing initrd memory: 38116K (ffff88003357e000 - ffff880035ab7000)
[ 0.659025] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.659026] software IO TLB [mem 0xd6139000-0xda139000] (64MB) mapped at [ffff8800d6139000-ffff8800da138fff]
[ 0.659088] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.659090] hw unit of domain pp0-core 2^-16 Joules
[ 0.659090] hw unit of domain package 2^-16 Joules
[ 0.659091] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.659220] Scanning for low memory corruption every 60 seconds
[ 0.659508] audit: initializing netlink subsys (disabled)
[ 0.659521] audit: type=2000 audit(1501160661.656:1): initialized
[ 0.659870] Initialise system trusted keyring
[ 0.659960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.661086] zbud: loaded
[ 0.661248] VFS: Disk quotas dquot_6.6.0
[ 0.661273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.661477] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.661663] fuse init (API version 7.23)
[ 0.661773] Key type big_key registered
[ 0.661787] Allocating IMA MOK and blacklist keyrings.
[ 0.662124] Key type asymmetric registered
[ 0.662127] Asymmetric key parser 'x509' registered
[ 0.662156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.662180] io scheduler noop registered
[ 0.662182] io scheduler deadline registered (default)
[ 0.662205] io scheduler cfq registered
[ 0.662424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.662430] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.662457] efifb: probing for efifb
[ 0.662467] efifb: framebuffer at 0xe8000000, mapped to 0xffffc90001000000, using 1984k, total 1984k
[ 0.662468] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 0.662468] efifb: scrolling: redraw
[ 0.662470] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.662537] Console: switching to colour frame buffer device 100x37
[ 0.662546] fb0: EFI VGA frame buffer device
[ 0.662553] intel_idle: MWAIT substates: 0x1120
[ 0.662554] intel_idle: v0.4.1 model 0x3A
[ 0.662555] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.662678] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.662681] ACPI: Power Button [PWRB]
[ 0.662709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.662711] ACPI: Power Button [PWRF]
[ 0.663264] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.663265] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.663425] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.663427] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.663527] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.663528] ACPI: Thermal Zone [THRM] (30 C)
[ 0.663563] GHES: HEST is not enabled!
[ 0.663642] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.664936] Linux agpgart interface v0.103
[ 0.665972] loop: module loaded
[ 0.666122] libphy: Fixed MDIO Bus: probed
[ 0.666125] tun: Universal TUN/TAP device driver, 1.6
[ 0.666126] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.666158] PPP generic driver version 2.4.2
[ 0.666205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.666209] ehci-pci: EHCI PCI platform driver
[ 0.666306] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.666311] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.666325] ehci-pci 0000:00:1a.0: debug port 2
[ 0.670214] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.670225] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7128000
[ 0.679975] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.680002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.680004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.680005] usb usb1: Product: EHCI Host Controller
[ 0.680006] usb usb1: Manufacturer: Linux 4.4.0-87-generic ehci_hcd
[ 0.680007] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.680162] hub 1-0:1.0: USB hub found
[ 0.680169] hub 1-0:1.0: 2 ports detected
[ 0.680358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.680362] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.680376] ehci-pci 0000:00:1d.0: debug port 2
[ 0.684279] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.684287] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7127000
[ 0.696013] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.696072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.696074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.696075] usb usb2: Product: EHCI Host Controller
[ 0.696076] usb usb2: Manufacturer: Linux 4.4.0-87-generic ehci_hcd
[ 0.696077] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.696237] hub 2-0:1.0: USB hub found
[ 0.696243] hub 2-0:1.0: 2 ports detected
[ 0.696351] ehci-platform: EHCI generic platform driver
[ 0.696361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.696365] ohci-pci: OHCI PCI platform driver
[ 0.696373] ohci-platform: OHCI generic platform driver
[ 0.696380] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.696427] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.696428] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.696975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.696981] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.697214] mousedev: PS/2 mouse device common for all mice
[ 0.697505] rtc_cmos 00:02: RTC can wake from S4
[ 0.697665] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.697693] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.697700] i2c /dev entries driver
[ 0.697741] device-mapper: uevent: version 1.0.3
[ 0.697804] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.697822] Intel P-state driver initializing.
[ 0.697917] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.697922] EFI Variables Facility v0.08 2004-May-17
[ 0.718841] NET: Registered protocol family 10
[ 0.718993] NET: Registered protocol family 17
[ 0.719003] Key type dns_resolver registered
[ 0.719141] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[ 0.719145] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[ 0.719178] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.719318] registered taskstats version 1
[ 0.719333] Loading compiled-in X.509 certificates
[ 0.720070] Loaded X.509 cert 'Build time autogenerated kernel key: 713bc24ccc5bf0d11d706d6f5bf7187ed23f7b25'
[ 0.720085] zswap: loaded using pool lzo/zbud
[ 0.721857] Key type trusted registered
[ 0.724952] Key type encrypted registered
[ 0.724957] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.724960] ima: No TPM chip found, activating TPM-bypass!
[ 0.724978] evm: HMAC attrs: 0x1
[ 0.725157] Magic number: 9:925:79
[ 0.725248] rtc_cmos 00:02: setting system clock to 2017-07-27 13:04:21 UTC (1501160661)
[ 0.725299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.725300] EDD information not available.
[ 0.725361] PM: Hibernation image not present or could not be loaded.
[ 0.726316] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
[ 0.726318] Write protecting the kernel read-only data: 14336k
[ 0.726711] Freeing unused kernel memory: 1756K (ffff880001849000 - ffff880001a00000)
[ 0.726935] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
[ 0.735667] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735733] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.735745] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736001] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736039] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736158] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736201] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736245] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736288] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.736329] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.768814] [drm] Initialized drm 1.1.0 20060810
[ 0.772855] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.781037] wmi: Mapper loaded
[ 0.784357] pps_core: LinuxPPS API ver. 1 registered
[ 0.784359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.785361] PTP clock support registered
[ 0.791217] ahci 0000:00:1f.2: version 3.0
[ 0.791397] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.791400] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.797241] checking generic (e8000000 1f0000) vs hw (e8000000 8000000)
[ 0.797243] fb: switching to nouveaufb from EFI VGA
[ 0.797269] Console: switching to colour dummy device 80x25
[ 0.797366] nouveau 0000:01:00.0: NVIDIA GF119 (0d9080a1)
[ 0.797554] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.797556] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.809565] scsi host0: ahci
[ 0.814187] scsi host1: ahci
[ 0.818858] scsi host2: ahci
[ 0.823972] scsi host3: ahci
[ 0.824023] ata1: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126100 irq 25
[ 0.824032] ata2: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126180 irq 25
[ 0.824033] ata3: DUMMY
[ 0.824033] ata4: DUMMY
[ 0.824461] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.933494] nouveau 0000:01:00.0: bios: version 75.19.64.00.00
[ 0.934332] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 0.991975] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.992160] [TTM] Zone kernel: Available graphics memory: 3033868 kiB
[ 0.992161] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.992162] [TTM] Initializing pool allocator
[ 0.992166] [TTM] Initializing DMA pool allocator
[ 0.992175] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 0.992176] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 0.992179] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 0.992181] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 0.992183] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 0.992184] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 0.992185] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 0.992187] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
[ 0.992188] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 0.992189] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 0.992190] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 1.004190] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.004191] [drm] Driver supports precise vblank timestamp query.
[ 1.007965] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.055076] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 1.112870] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.112873] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:d6:e3:8c
[ 1.112875] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.112993] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.113825] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.128267] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.128270] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.128515] hub 1-1:1.0: USB hub found
[ 1.128613] hub 1-1:1.0: 4 ports detected
[ 1.140390] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.140392] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.140510] hub 2-1:1.0: USB hub found
[ 1.140614] hub 2-1:1.0: 6 ports detected
[ 1.192019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.192093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.192870] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.192874] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.192875] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.193708] ata1.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133
[ 1.193711] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.194685] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.194688] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.194690] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.195230] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.195233] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.195235] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.195477] ata1.00: configured for UDMA/133
[ 1.195526] ata2.00: ATAPI: ATAPI DVD A DH16ACSH, JA11, max UDMA/100
[ 1.195597] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5
[ 1.195787] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.195789] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.195837] sd 0:0:0:0: [sda] Write Protect is off
[ 1.195839] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.195860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.195995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.196989] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.196992] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.196994] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.197254] ata2.00: configured for UDMA/100
[ 1.199356] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16ACSH JA11 PQ: 0 ANSI: 5
[ 1.218790] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.218792] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.218875] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.218912] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.239595] sda: sda1 sda2 sda3 sda4
[ 1.239834] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.366312] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff880193cac800
[ 1.366446] fbcon: nouveaufb (fb0) is primary device
[ 1.366708] Console: switching to colour frame buffer device 240x67
[ 1.366733] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 1.399952] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 1.435939] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.435955] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[ 1.536092] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c328
[ 1.536095] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.536096] usb 2-1.5: Product: USB Keyboard
[ 1.536097] usb 2-1.5: Manufacturer: Logitech
[ 1.542466] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.551937] usbcore: registered new interface driver usbhid
[ 1.551939] usbhid: USB HID core driver
[ 1.554370] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C328.0001/input/input5
[ 1.608162] hid-generic 0003:046D:C328.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
[ 1.610157] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C328.0002/input/input6
[ 1.664566] hid-generic 0003:046D:C328.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
[ 1.731389] tsc: Refined TSC clocksource calibration: 2893.434 MHz
[ 1.731392] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b5086f1e9, max_idle_ns: 440795240602 ns
[ 1.776595] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0158
[ 1.776598] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.776600] usb 1-1.3: Product: USB2.0-CRW
[ 1.776601] usb 1-1.3: Manufacturer: Generic
[ 1.776603] usb 1-1.3: SerialNumber: 20071114173400000
[ 1.783857] usbcore: registered new interface driver usb-storage
[ 1.785229] usbcore: registered new interface driver uas
[ 1.786362] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[ 1.801358] scsi host4: usb-storage 1-1.3:1.0
[ 1.801526] usbcore: registered new interface driver ums-realtek
[ 1.955863] usb 1-1.3: USB disconnect, device number 3
[ 2.124537] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.212818] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.728083] clocksource: Switched to clocksource tsc
[ 3.044814] random: nonblocking pool is initialized
[ 3.183175] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.183264] systemd[1]: Detected architecture x86-64.
[ 3.187569] systemd[1]: Set hostname to <pimprenelle-imedia-S2870>.
[ 4.513883] systemd[1]: Listening on udev Kernel Socket.
[ 4.513970] systemd[1]: Created slice User and Session Slice.
[ 4.514002] systemd[1]: Listening on Syslog Socket.
[ 4.514034] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.514054] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.514062] systemd[1]: Reached target User and Group Name Lookups.
[ 4.514089] systemd[1]: Listening on Journal Socket.
[ 4.514124] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.514132] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.514161] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.514181] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.514237] systemd[1]: Listening on Journal Audit Socket.
[ 4.514246] systemd[1]: Reached target Remote File Systems.
[ 4.514272] systemd[1]: Listening on udev Control Socket.
[ 4.514371] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.514407] systemd[1]: Created slice System Slice.
[ 4.551921] systemd[1]: Starting Load Kernel Modules...
[ 4.552277] systemd[1]: Starting Set console keymap...
[ 4.552743] systemd[1]: Started Braille Device Support.
[ 4.553196] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.553486] systemd[1]: Mounting Huge Pages File System...
[ 4.553811] systemd[1]: Starting Journal Service...
[ 4.554112] systemd[1]: Mounting Debug File System...
[ 4.554416] systemd[1]: Starting Nameserver information manager...
[ 4.554432] systemd[1]: Reached target Slices.
[ 4.554734] systemd[1]: Starting Uncomplicated firewall...
[ 4.572276] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.572682] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.572999] systemd[1]: Started Read required files in advance.
[ 4.573429] systemd[1]: Reached target Encrypted Volumes.
[ 4.856951] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.871940] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.907920] systemd[1]: Started Uncomplicated firewall.
[ 5.035393] systemd[1]: Started Journal Service.
[ 5.038749] lp: driver loaded but no devices found
[ 5.041601] ppdev: user-space parallel port driver
[ 5.553842] it87: Found IT8728F chip at 0xa30, revision 0
[ 6.741159] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.861422] systemd-journald[273]: Received request to flush runtime journal from PID 1
[ 7.259262] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 7.259268] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.259275] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.259277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.259278] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.259280] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.259281] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 7.259283] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.259284] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.283221] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.304315] EDAC MC: Ver: 3.0.0
[ 7.967703] intel_rapl: Found RAPL domain package
[ 7.967706] intel_rapl: Found RAPL domain core
[ 7.967711] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 8.083539] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 8.083757] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 8.083793] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 8.083798] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 8.159943] snd_hda_codec_realtek hdaudioC0D0: ALC662 rev1: SKU not ready 0x411111f0
[ 8.160268] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.160270] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.160272] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.160273] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.160274] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.160275] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 8.160277] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 8.160278] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 8.170067] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.170117] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.170159] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.170199] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.170239] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.447905] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 8.447954] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 11.481780] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.461279] Adding 4095996k swap on /dev/sda4. Priority:-1 extents:1 across:4095996k FS
[ 13.552386] audit: type=1400 audit(1501160674.322:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=688 comm="apparmor_parser"
[ 13.552392] audit: type=1400 audit(1501160674.322:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser"
[ 13.552396] audit: type=1400 audit(1501160674.322:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=688 comm="apparmor_parser"
[ 13.552400] audit: type=1400 audit(1501160674.322:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser"
[ 13.597736] audit: type=1400 audit(1501160674.370:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=692 comm="apparmor_parser"
[ 13.597743] audit: type=1400 audit(1501160674.370:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=692 comm="apparmor_parser"
[ 13.617357] audit: type=1400 audit(1501160674.386:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=693 comm="apparmor_parser"
[ 13.617364] audit: type=1400 audit(1501160674.386:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=693 comm="apparmor_parser"
[ 13.617367] audit: type=1400 audit(1501160674.386:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=693 comm="apparmor_parser"
[ 13.617371] audit: type=1400 audit(1501160674.386:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=693 comm="apparmor_parser"
[ 22.715606] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 22.971012] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 24.640937] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 24.640943] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 24.640979] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 25.293800] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4021.971904] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 5267.023191] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 5267.117566] usb 1-1.1: New USB device found, idVendor=04da, idProduct=2372
[ 5267.117571] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5267.117574] usb 1-1.1: Product: DMC-SZ1
[ 5267.117576] usb 1-1.1: Manufacturer: Panasonic
[ 5267.117578] usb 1-1.1: SerialNumber: 0000000000000000002X1612100766
[ 5267.118359] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 5267.118555] usb-storage 1-1.1:1.0: Quirks match for vid 04da pid 2372: 90
[ 5267.118576] scsi host5: usb-storage 1-1.1:1.0
[ 5267.135551] usb 1-1.1: USB disconnect, device number 4
[ 5277.598663] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[ 5277.693067] usb 1-1.1: New USB device found, idVendor=04da, idProduct=2372
[ 5277.693072] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5277.693075] usb 1-1.1: Product: DMC-SZ1
[ 5277.693077] usb 1-1.1: Manufacturer: Panasonic
[ 5277.693079] usb 1-1.1: SerialNumber: 0000000000000000002X1612100766
[ 5277.693556] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 5277.694263] usb-storage 1-1.1:1.0: Quirks match for vid 04da pid 2372: 90
[ 5277.694328] scsi host6: usb-storage 1-1.1:1.0
[ 5278.691780] scsi 6:0:0:0: Direct-Access MATSHITA DMC-SZ1 0100 PQ: 0 ANSI: 5
[ 5278.692905] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5278.713324] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.713340] sd 6:0:0:0: [sdb] 152063 512-byte logical blocks: (77.9 MB/74.2 MiB)
[ 5278.732530] sd 6:0:0:0: [sdb] Write Protect is on
[ 5278.732536] sd 6:0:0:0: [sdb] Mode Sense: 23 00 80 00
[ 5278.752540] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 5278.753682] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.909135] sdb: sdb1
[ 5278.909152] sdb: p1 size 151943 extends beyond EOD, enabling native capacity
[ 5278.910050] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.949815] sdb: sdb1
[ 5278.949830] sdb: p1 size 151943 extends beyond EOD, truncated
[ 5278.951679] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.992450] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5385.741048] usb 1-1.1: USB disconnect, device number 5Dernière modification par Pimprelune (Le 27/07/2017, à 22:06)
Hors ligne
#267 Le 27/07/2017, à 18:07
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
À tout zazard, je précise que je n'ai pas eu de problème pour copier-coller le
top, il y a eu comme un "passage à vide" !?!
Hors ligne
#268 Le 27/07/2017, à 18:13
- nam1962
Re : [Abandonné] Lenteur extrême partout
Côté extensions, https everywhere et Wot consomment plein de RAM (et Wot a une éthique doûteuse)
Tu peux les supprimer.
Si tu veux un équivalent (pas forcément indispensable) tu peux prendre Calomel SSL : https://addons.mozilla.org/fr/firefox/a … alidation/ (mais je ne le ferais pas)
Je te conseille fortement betterprivacy qui élimine les cookies long terme (LSO) : https://addons.mozilla.org/fr/firefox/a … erprivacy/
Tu utilises un vpn ?
Dernière modification par nam1962 (Le 27/07/2017, à 18:14)
[ Modéré ]
Hors ligne
#269 Le 27/07/2017, à 18:16
- Caribou22
Re : [Abandonné] Lenteur extrême partout
je n'ai rien trouvé sur ce modèle pour son démontage...
Est-ce que cette vidéo du montage d'une carte graphique t'aide ? https://youtu.be/YXoyoGVnPwY?list=PL06n … CuYLo8U_JM
C'est exactement l'inverse pour la retirer :
- Retirer la vis.
- Déverrouiller le loquet.
- Retirer la carte qui doit venir facilement.
Hors ligne
#270 Le 27/07/2017, à 18:43
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
Côté extensions, https everywhere et Wot consomment plein de RAM (et Wot a une éthique doûteuse)
Tu peux les supprimer.
Si tu veux un équivalent (pas forcément indispensable) tu peux prendre Calomel SSL : https://addons.mozilla.org/fr/firefox/a … alidation/ (mais je ne le ferais pas)
Je te conseille fortement betterprivacy qui élimine les cookies long terme (LSO) : https://addons.mozilla.org/fr/firefox/a … erprivacy/Tu utilises un vpn ?
Haaa bon ? Je les élimine par la page Modules complémentaires et j'installe celui que tu proposes par le même biais, je suppose, nam1962 ?
Et oui, pour le vpn. Mais il n'est pas souvent activé...
Merci, Caribou22, mais ça ne correspond pas vraiment aux dimensions de mon PC, aussi, j'ai trouvé cette vidéo --> https://www.youtube.com/watch?v=EZ_X18cNjt8
Dernière modification par Pimprelune (Le 27/07/2017, à 22:11)
Hors ligne
#271 Le 27/07/2017, à 19:01
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
nam1962 a écrit :
Côté extensions, https everywhere et Wot consomment plein de RAM (et Wot a une éthique doûteuse)
Tu peux les supprimer.
Si tu veux un équivalent (pas forcément indispensable) tu peux prendre Calomel SSL : https://addons.mozilla.org/fr/firefox/a … alidation/ (mais je ne le ferais pas)
Je te conseille fortement betterprivacy qui élimine les cookies long terme (LSO) : https://addons.mozilla.org/fr/firefox/a … erprivacy/
Bon, mon anglais datant de l'an quarante, lire les explications est un peu galère, nam1962, mais justement, j'ai cru lire un passage sur ces fameux cookies
(------------------------- IMPORTANT -------------------------
IF YOU PERMIT DELETION OF LSO's,
THEN COOKIE-STORED INFORMATION LIKE
GAME SETTINGS OR LOGIN DATA (YAHOO SEAL)
MIGHT BE LOST! MAKE SURE THAT YOU EXCLUDED
IMPORTANT COOKIES FROM DELETION (SEE FAQ))
et mon problème étant que je ne voudrais pas perdre des choses importantes sur ce site qui cafouille déjà chaque jour, à chaque connexion, pour des histoires de pistage.
En gros, quand je veux me connecter, une fenêtre apparaît comme quoi je dois accepter les cookies. Pour que mon identifiant et MDP soit admis, il faut que je désactive la protection contre le pistage, je me connecte, et je réactive l'addon !
Bref, j'essaye de capturer l'écran qui s'affiche et bien entendu, là, le message n'apparaît pas (à devenir barjo !)...
Ça remplacera les deux que je vais enlever, nam1962 ?
Dernière modification par Pimprelune (Le 06/08/2017, à 16:17)
Hors ligne
#272 Le 27/07/2017, à 20:17
- nam1962
Re : [Abandonné] Lenteur extrême partout
Les deux que tu vas enlever ne sont pas tant utiles :
- aujourd'hui tous les navigateurs et Goo alertent ou dégradent le classement des sites sans SSL (non https)
- firefox (et sûrement d'autres navigateurs) intègrent de plus en plus nativement des alertes sur les sites pourris
- wot n'apporte en réalité rien (tu parles à un gusse vexé qui un moment a cru que si).
Je vois l'alerte que tu as barrée, elle est, comment dire... étrange.
Un cookie LSO, grosso signale au monde entier quand tu allumes et éteint ton ordi et une partie de ce que tu y fais. (Et bien sûr bouffe ta bande passante, ce qui fatalement ralentit)
[ Modéré ]
Hors ligne
#273 Le 27/07/2017, à 20:30
- Coeur Noir
Re : [Abandonné] Lenteur extrême partout
pimprenelle@pimprenelle-imedia-S2870:~$ free -m
total utilisé libre partagé tamp/cache disponible
Mem: 5925 3089 143 88 2692 2415
Partition d'échange: 3999 0 3999La RAM me paraît fort sollicitée, non ?
Le top à tout casser voit 30% de RAM utilisée, alors que free montre > 50% d'utilisé.
Est-ce que le ralentissement a lieu à chaque fois que tu branches ton APN Panasonic ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#274 Le 27/07/2017, à 20:36
- Pimprelune
Re : [Abandonné] Lenteur extrême partout
Mon APN Panasonic, Coeur Noir ? Ah, non, aucun rapport, vu que je ne me sers jamais de l'appareil photo. Et les ralentissements sont pourtant présents.
Hors ligne
#275 Le 27/07/2017, à 20:50
- moko138
Re : [Abandonné] Lenteur extrême partout
Tu n'as rien de plus vieux qu'une carte mémoire de 80 mégas ?
Est-ce du fat16 ou du fat12 ?
Ton dmesg de 858 lignes se termine par :
[ 5278.713340] sd 6:0:0:0: [sdb] 152063 512-byte logical blocks: (77.9 MB/74.2 MiB)
[ 5278.732530] sd 6:0:0:0: [sdb] Write Protect is on
[ 5278.732536] sd 6:0:0:0: [sdb] Mode Sense: 23 00 80 00
[ 5278.752540] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 5278.753682] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.909135] sdb: sdb1
[ 5278.909152] sdb: p1 size 151943 extends beyond EOD, enabling native capacity
[ 5278.910050] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.949815] sdb: sdb1
[ 5278.949830] sdb: p1 size 151943 extends beyond EOD, truncated
[ 5278.951679] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 152064
[ 5278.992450] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5385.741048] usb 1-1.1: USB disconnect, device number 5
beyond EOD : "au-delà de la fin du périphérique"
==> géométrie mal reconnue.
Plutôt que de la réparer, je te propose de la mettre au musée.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne