Pages : 1
#1 Le 16/07/2018, à 23:51
- Valkera
[Résolu] Optimus et 18.04, pc bloqué
Bonjour,
J'ai récemment acheté un pc MSI GL62M 7RDX-2646XFR, voici la config :
Processeur : Intel Core i5-7300HQ
Carte Graphique : Nvidia GeForce GTX 1050
8 Go de RAM
Il est vendu sans OS, j'ai donc installé Ubuntu 18.04 LTS afin de découvrir l’environnement GNU/Linux.
Le pc démarre correctement, cependant il freeze dans les cas suivants :
- Si j'essaye d'éteindre le pc (déjà essayé la commande shutdown -h now le résultat est le même)
- Lorsque je lance certains programmes installés à l'origine tels que Rhythmbox
- Lorsque que j'essaye d'accéder à l'interface de réglages de l'ordinateur
De plus si je mets le pc en veille je ne peux plus en sortir, dans tous les cas je dois l'éteindre en maintenant le bouton d'alimentation.
Pour le pilote graphique j'ai essayé avec le pilote de base (xserver-xorg) et le pilote nvidia préinstallé.
Merci d'avance pour votre aide.
Dernière modification par Valkera (Le 17/07/2018, à 23:51)
Hors ligne
#2 Le 17/07/2018, à 00:08
- Coeur Noir
Re : [Résolu] Optimus et 18.04, pc bloqué
Hello Valkera,
1) Un pilote nvidia préinstallé ?
Pourrais-tu décrire comment tu as procédé à l'installation de ce pilote ?
2) y-a-t-il 2 « cartes » graphiques sur ce pc, la nvidia et une intel intégrée ?
Depuis un terminal, copie-colle ici, entre balises codes ( voir liens en signature, notamment les retours de commandes ) la réponse de :
sudo lshwça donnera un descriptif détaillé de ta machine.
N'oublie pas les balises code, le retour est assez long.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#3 Le 17/07/2018, à 00:25
- Valkera
Re : [Résolu] Optimus et 18.04, pc bloqué
Le pilote nvidia est installé en même temps qu'ubuntu et est présent dans l'onglet "Pilotes additionnels" du logiciel "Logiciels & mises à jours"
En effet, il y a la carte graphique nvidia et la carte graphique du processeur.
Quand je tape sudo lshw j'ai le retour suivant :
PCI (sysfs)et le pc freeze, je ne peux donc pas te donner le résultat attendu, désolé 
Hors ligne
#4 Le 17/07/2018, à 01:03
- Coeur Noir
Re : [Résolu] Optimus et 18.04, pc bloqué
Ok. Je ne pense pas que le pilote nvidia s'installe en même temps qu'Ubuntu, mais plutôt quand tu l'actives dans « Pilotes additionnels », mais qu'importe, tu es allé au bon endroit.
Il faudrait s'assurer que la bonne carte est utilisée avec le bon pilote.
https://doc.ubuntu-fr.org/nvidia
Peut-être cette commande plus « light »
lspci -vnn | grep -A 12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"vue dans https://doc.ubuntu-fr.org/carte_graphique §1
Un « freeze » ça peut aussi être de la ram qui sature…
free -het
topla première donnant juste l'état de la ram,
la seconde listant les tâches et leur occupation cpu, mémoire, etc…
ctrl+c pour quitter la seconde et revenir au prompt du terminal ( ou fermer le terminal ).
On aura aussi des infos s'il s'agit d'un problème matériel dans
dmesg | tail -32donnera les 32 dernières lignes de la sortie, donc à faire juste après un freeze.
Sinon dmesg tout court donnera une très longue liste d'événements matériels depuis que ton pc est allumé.
Et autre question : avant installation avais-tu testé la 18.04 sur ton PC en live-session depuis usb, sans installer ?
Dernière modification par Coeur Noir (Le 17/07/2018, à 01:05)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#5 Le 17/07/2018, à 01:51
- Valkera
Re : [Résolu] Optimus et 18.04, pc bloqué
Pour la première commande plus "light", le pc freeze aussi.
Pour la ram pas de pb
KiB Mem : 8086856 total, 6118592 libr, 977248 util, 991016 tamp/cache
KiB Éch: 2097148 total, 2097148 libr, 0 util. 6691300 dispo MemPour la commande à effectuer après un freeze, je ne peux pas l’exécuter étant donné que je suis obligé de reboot en maintenant le bouton d'alimentation.
Cependant pour la commande dmesg voici le long (très long) retour :
[ 0.000000] microcode: microcode updated early to revision 0x84, date = 2018-01-21
[ 0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9df1f085-b1f2-43ec-b178-7c25d3ab754d ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000076587fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076588000-0x0000000076588fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000076589000-0x0000000076589fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007658a000-0x000000007bca8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bca9000-0x000000007c730fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c731000-0x000000007cbbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cbbc000-0x000000007cfa2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007cfa3000-0x000000007d37efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007d37f000-0x000000007d3fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007d3fe000-0x000000007d3fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007d3ff000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7cbbc000 ACPI=0x7cbbc000 SMBIOS=0x7d2f0000 SMBIOS 3.0=0x7d2ef000 ESRT=0x7a7bdd18
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GL62M 7RDX/MS-16J9, BIOS E16J9IMS.31C 10/24/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 007D800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7d3ff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000007a7bdd18 to 0x000000007a7bdd50.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x26df3f000, 0x26df3ffff] PGTABLE
[ 0.000000] BRK [0x26df40000, 0x26df40fff] PGTABLE
[ 0.000000] BRK [0x26df41000, 0x26df41fff] PGTABLE
[ 0.000000] BRK [0x26df42000, 0x26df42fff] PGTABLE
[ 0.000000] BRK [0x26df43000, 0x26df43fff] PGTABLE
[ 0.000000] BRK [0x26df44000, 0x26df44fff] PGTABLE
[ 0.000000] BRK [0x26df45000, 0x26df45fff] PGTABLE
[ 0.000000] BRK [0x26df46000, 0x26df46fff] PGTABLE
[ 0.000000] BRK [0x26df47000, 0x26df47fff] PGTABLE
[ 0.000000] BRK [0x26df48000, 0x26df48fff] PGTABLE
[ 0.000000] BRK [0x26df49000, 0x26df49fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31897000-0x34c42fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007CBBC000 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x000000007CBBC0B8 0000EC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007CBE43C0 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007CBBC238 028188 (v02 MSI_NB MEGABOOK 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000007CF8AC40 000040
[ 0.000000] ACPI: APIC 0x000000007CBE44D8 000084 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007CBE4560 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000007CBE45A8 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[ 0.000000] ACPI: MCFG 0x000000007CBE4670 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007CBE46B0 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: FIDT 0x000000007CBE49D8 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007CBE4A78 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007CBE4BF0 00317F (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007CBE7D70 002771 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000007CBEA4E8 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007CBEA520 005DFB (v02 INTEL RV11Rtd3 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007CBF0320 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000007CBF1108 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007CBF1150 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000007CBF2030 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000007CBF20C8 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007CBF20F0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000007CBF2390 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007CBF23C8 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x000000007CBF2420 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007CBF2458 0000AE (v02 SgRef SgPeg 00001000 INTL 20160422)
[ 0.000000] ACPI: TPM2 0x000000007CBF2508 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007CBF2540 001A94 (v01 OptRef OptTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: ASF! 0x000000007CBF3FD8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efd5000-0x27effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000076587fff]
[ 0.000000] node 0: [mem 0x000000007658a000-0x000000007bca8fff]
[ 0.000000] node 0: [mem 0x000000007c731000-0x000000007cbbbfff]
[ 0.000000] node 0: [mem 0x000000007d3fe000-0x000000007d3fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2076879
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7877 pages used for memmap
[ 0.000000] DMA32 zone: 504115 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76588000-0x76588fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76589000-0x76589fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bca9000-0x7c730fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7cbbc000-0x7cfa2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7cfa3000-0x7d37efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d37f000-0x7d3fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d3ff000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044403
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9df1f085-b1f2-43ec-b178-7c25d3ab754d ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7921168K/8307516K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 386348K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39083 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 2500.000 MHz processor
[ 0.028000] tsc: Detected 2496.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=9984000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028000] CPU: Physical Processor ID: 0
[ 0.028000] CPU: Processor Core ID: 0
[ 0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028000] mce: CPU supports 10 MCE banks
[ 0.028000] CPU0: Thermal monitoring enabled (TM1)
[ 0.028000] process: using mwait in idle threads
[ 0.028000] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.028000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028000] Speculative Store Bypass: Vulnerable
[ 0.028000] Freeing SMP alternatives memory: 36K
[ 0.034735] TSC deadline timer enabled
[ 0.034739] smpboot: CPU0: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.034795] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.034825] ... version: 4
[ 0.034825] ... bit width: 48
[ 0.034826] ... generic registers: 8
[ 0.034827] ... value mask: 0000ffffffffffff
[ 0.034827] ... max period: 00007fffffffffff
[ 0.034828] ... fixed-purpose events: 3
[ 0.034828] ... event mask: 00000007000000ff
[ 0.034864] Hierarchical SRCU implementation.
[ 0.035809] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.035821] smp: Bringing up secondary CPUs ...
[ 0.035881] x86: Booting SMP configuration:
[ 0.035883] .... node #0, CPUs: #1 #2 #3
[ 0.038005] smp: Brought up 1 node, 4 CPUs
[ 0.038005] smpboot: Max logical packages: 1
[ 0.038005] smpboot: Total of 4 processors activated (19968.00 BogoMIPS)
[ 0.040223] devtmpfs: initialized
[ 0.040223] x86/mm: Memory block size: 128MB
[ 0.040626] evm: security.selinux
[ 0.040626] evm: security.SMACK64
[ 0.040627] evm: security.SMACK64EXEC
[ 0.040627] evm: security.SMACK64TRANSMUTE
[ 0.040628] evm: security.SMACK64MMAP
[ 0.040628] evm: security.apparmor
[ 0.040629] evm: security.ima
[ 0.040629] evm: security.capability
[ 0.040641] PM: Registering ACPI NVS region [mem 0x76588000-0x76588fff] (4096 bytes)
[ 0.040641] PM: Registering ACPI NVS region [mem 0x7cbbc000-0x7cfa2fff] (4091904 bytes)
[ 0.040641] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040641] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.040641] pinctrl core: initialized pinctrl subsystem
[ 0.040641] RTC time: 23:30:57, date: 07/16/18
[ 0.040641] NET: Registered protocol family 16
[ 0.040641] audit: initializing netlink subsys (disabled)
[ 0.040641] audit: type=2000 audit(1531783857.040:1): state=initialized audit_enabled=0 res=1
[ 0.040641] cpuidle: using governor ladder
[ 0.040641] cpuidle: using governor menu
[ 0.040641] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040641] ACPI: bus type PCI registered
[ 0.040641] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040641] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.040641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.040641] PCI: Using configuration type 1 for base access
[ 0.041089] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.041089] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.041091] ACPI: Added _OSI(Module Device)
[ 0.041091] ACPI: Added _OSI(Processor Device)
[ 0.041091] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041091] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.041091] ACPI: EC: EC started
[ 0.041091] ACPI: EC: interrupt blocked
[ 0.045296] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 0.045305] No Local Variables are initialized for Method [_REG]
[ 0.045306] Initialized Arguments for Method [_REG]: (2 arguments defined for method invocation)
[ 0.045307] Arg0: 00000000b608a1a6 <Obj> Integer 0000000000000003
[ 0.045312] Arg1: 00000000608db1d5 <Obj> Integer 0000000000000001
[ 0.045316] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC._REG, AE_NOT_FOUND (20170831/psparse-550)
[ 0.045334] ACPI: \: Used as first EC
[ 0.045336] ACPI: \: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.045337] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.050127] ACPI Exception: Could not find/resolve named package element: V0PR (20170831/dspkginit-381)
[ 0.050158] ACPI Exception: Could not find/resolve named package element: V0PR (20170831/dspkginit-381)
[ 0.050201] ACPI Exception: Could not find/resolve named package element: V1PR (20170831/dspkginit-381)
[ 0.050229] ACPI Exception: Could not find/resolve named package element: V1PR (20170831/dspkginit-381)
[ 0.050271] ACPI Exception: Could not find/resolve named package element: V2PR (20170831/dspkginit-381)
[ 0.050299] ACPI Exception: Could not find/resolve named package element: V2PR (20170831/dspkginit-381)
[ 0.050355] ACPI: Executed 42 blocks of module-level executable AML code
[ 0.068501] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.076967] ACPI: Dynamic OEM Table Load:
[ 0.076967] ACPI: SSDT 0xFFFF9906F4D6B000 000600 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.076967] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.076967] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.077817] ACPI: Dynamic OEM Table Load:
[ 0.077824] ACPI: SSDT 0xFFFF9906F4E56800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.078126] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.080494] ACPI: Dynamic OEM Table Load:
[ 0.080501] ACPI: SSDT 0xFFFF9906F4C28800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.081166] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.081177] ACPI: Dynamic OEM Table Load:
[ 0.081177] ACPI: SSDT 0xFFFF9906F4E16400 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.081177] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.084645] ACPI: Interpreter enabled
[ 0.084690] ACPI: (supports S0 S3 S4 S5)
[ 0.084691] ACPI: Using IOAPIC for interrupt routing
[ 0.084734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.086046] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.089108] ACPI: Power Resource [PG00] (on)
[ 0.149253] ACPI: Power Resource [PG01] (on)
[ 0.149786] ACPI: Power Resource [PG02] (on)
[ 0.150669] ACPI: Power Resource [PXP] (on)
[ 0.304611] ACPI: Power Resource [WRST] (on)
[ 0.305078] ACPI: Power Resource [WRST] (on)
[ 0.305537] ACPI: Power Resource [WRST] (on)
[ 0.305990] ACPI: Power Resource [WRST] (on)
[ 0.306118] ACPI: Power Resource [PXP] (off)
[ 0.306670] ACPI: Power Resource [WRST] (on)
[ 0.307244] ACPI: Power Resource [WRST] (on)
[ 0.307696] ACPI: Power Resource [WRST] (on)
[ 0.308147] ACPI: Power Resource [WRST] (on)
[ 0.308599] ACPI: Power Resource [WRST] (on)
[ 0.309050] ACPI: Power Resource [WRST] (on)
[ 0.309177] ACPI: Power Resource [PXP] (off)
[ 0.309661] ACPI: Power Resource [WRST] (on)
[ 0.309796] ACPI: Power Resource [PXP] (off)
[ 0.310279] ACPI: Power Resource [WRST] (on)
[ 0.310743] ACPI: Power Resource [WRST] (on)
[ 0.310871] ACPI: Power Resource [PXP] (off)
[ 0.311424] ACPI: Power Resource [WRST] (on)
[ 0.311995] ACPI: Power Resource [WRST] (on)
[ 0.312447] ACPI: Power Resource [WRST] (on)
[ 0.312896] ACPI: Power Resource [WRST] (on)
[ 0.314609] ACPI: Power Resource [WRST] (on)
[ 0.315060] ACPI: Power Resource [WRST] (on)
[ 0.315509] ACPI: Power Resource [WRST] (on)
[ 0.319991] ACPI: Power Resource [PX01] (off)
[ 0.321162] ACPI: Power Resource [PX02] (off)
[ 0.322285] ACPI: Power Resource [PX03] (off)
[ 0.324159] ACPI: Power Resource [PX04] (off)
[ 0.325361] ACPI: Power Resource [PX05] (off)
[ 0.325646] ACPI: Power Resource [PX06] (off)
[ 0.328797] ACPI: Power Resource [USBC] (on)
[ 0.329021] ACPI: Power Resource [PAUD] (on)
[ 0.329747] ACPI: Power Resource [V0PR] (on)
[ 0.329811] ACPI: Power Resource [V1PR] (on)
[ 0.329871] ACPI: Power Resource [V2PR] (on)
[ 0.333764] ACPI: Power Resource [PXTC] (on)
[ 0.334601] ACPI: Power Resource [PXTC] (off)
[ 0.344250] ACPI: Power Resource [FN00] (off)
[ 0.344375] ACPI: Power Resource [FN01] (off)
[ 0.344493] ACPI: Power Resource [FN02] (off)
[ 0.344611] ACPI: Power Resource [FN03] (off)
[ 0.344726] ACPI: Power Resource [FN04] (off)
[ 0.346187] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.346194] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.348106] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.348107] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.348906] PCI host bridge to bus 0000:00
[ 0.348908] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.348909] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.348911] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.348912] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.348913] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.348915] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.348916] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.348917] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.348918] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.348920] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.348921] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.348922] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.348923] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.348925] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.348926] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.348927] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.348928] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.348930] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[ 0.348931] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.348932] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.348941] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[ 0.349383] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.349429] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.349673] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[ 0.349684] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.349690] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.349694] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.349711] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.349940] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.349961] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
[ 0.350030] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.350301] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.350322] pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
[ 0.350529] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.350554] pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
[ 0.350628] pci 0000:00:16.0: PME# supported from D3hot
[ 0.350837] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.350854] pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
[ 0.350861] pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
[ 0.350868] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.350875] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.350882] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.350889] pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
[ 0.350929] pci 0000:00:17.0: PME# supported from D3hot
[ 0.351145] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.351211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.351439] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.351506] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.351737] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.351811] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.352058] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[ 0.352342] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.352356] pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
[ 0.352575] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[ 0.352600] pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
[ 0.352625] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
[ 0.352673] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.352934] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.352994] pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
[ 0.353064] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.353354] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[ 0.353369] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.353377] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.353384] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.353390] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.353395] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.364013] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.364016] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.364018] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.364021] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.364100] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
[ 0.364148] pci 0000:02:00.0: reg 0x10: [mem 0xdf300000-0xdf301fff 64bit]
[ 0.364312] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.364483] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.364488] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.364556] pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000
[ 0.364587] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf23ffff 64bit]
[ 0.364598] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.364709] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364834] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.364837] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.364840] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.364923] pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
[ 0.364951] pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
[ 0.376034] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.376039] pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.381425] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.381568] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381777] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381846] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381915] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.382793] ACPI: EC: interrupt unblocked
[ 0.382806] ACPI: EC: event unblocked
[ 0.382817] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.382819] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.383000] SCSI subsystem initialized
[ 0.383010] libata version 3.00 loaded.
[ 0.383010] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.383010] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.383010] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.383010] vgaarb: loaded
[ 0.383010] ACPI: bus type USB registered
[ 0.383010] usbcore: registered new interface driver usbfs
[ 0.383010] usbcore: registered new interface driver hub
[ 0.383010] usbcore: registered new device driver usb
[ 0.383010] EDAC MC: Ver: 3.0.0
[ 0.383010] Registered efivars operations
[ 0.398774] PCI: Using ACPI for IRQ routing
[ 0.426217] PCI: pci_cache_line_size set to 64 bytes
[ 0.426287] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.426288] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.426289] e820: reserve RAM buffer [mem 0x76588000-0x77ffffff]
[ 0.426290] e820: reserve RAM buffer [mem 0x7bca9000-0x7bffffff]
[ 0.426291] e820: reserve RAM buffer [mem 0x7cbbc000-0x7fffffff]
[ 0.426292] e820: reserve RAM buffer [mem 0x7d3ff000-0x7fffffff]
[ 0.426293] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.426374] NetLabel: Initializing
[ 0.426375] NetLabel: domain hash size = 128
[ 0.426375] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.426388] NetLabel: unlabeled traffic allowed by default
[ 0.426401] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.426401] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.429028] clocksource: Switched to clocksource hpet
[ 0.437140] VFS: Disk quotas dquot_6.6.0
[ 0.437152] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.437231] AppArmor: AppArmor Filesystem Enabled
[ 0.437250] pnp: PnP ACPI init
[ 0.437517] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[ 0.437561] pnp 00:01: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002 PNP0f13 (active)
[ 0.437710] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.437712] system 00:02: [io 0xffff] has been reserved
[ 0.437714] system 00:02: [io 0xffff] has been reserved
[ 0.437715] system 00:02: [io 0xffff] has been reserved
[ 0.437716] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.437718] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.437722] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437827] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.437831] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437850] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.437890] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.437893] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.438537] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.438539] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.438540] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.438542] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.438543] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.438545] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.438546] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.438548] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.438550] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.438551] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.438555] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.438601] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.438603] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.438604] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.438606] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.438607] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.438609] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.438610] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.438613] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.438985] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.438989] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440567] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.440569] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.440570] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.440574] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441719] pnp: PnP ACPI: found 10 devices
[ 0.449207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.449232] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.449234] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.449237] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.449240] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.449244] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449247] pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.449253] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.449255] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.449258] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.449263] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.449267] pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.449274] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.449275] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.449277] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.449278] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.449279] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.449280] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.449282] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.449283] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.449284] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.449286] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.449287] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.449288] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.449290] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.449291] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.449292] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.449293] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.449295] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[ 0.449296] pci_bus 0000:00: resource 21 [mem 0xfc000000-0xfc00ffff window]
[ 0.449297] pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
[ 0.449299] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.449300] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.449301] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.449303] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.449304] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.449305] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.449307] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.449520] NET: Registered protocol family 2
[ 0.449668] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.449762] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.449903] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.449928] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.449950] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450004] NET: Registered protocol family 1
[ 0.450016] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.450292] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.450310] PCI: CLS 64 bytes, default 64
[ 0.450336] Unpacking initramfs...
[ 1.269406] Freeing initrd memory: 52912K
[ 1.269412] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.269415] software IO TLB [mem 0x711f7000-0x751f7000] (64MB) mapped at [000000007ec6dd1c-0000000098dd9acf]
[ 1.269593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[ 1.269714] Scanning for low memory corruption every 60 seconds
[ 1.270388] Initialise system trusted keyrings
[ 1.270395] Key type blacklist registered
[ 1.270446] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.271415] zbud: loaded
[ 1.271876] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.272069] fuse init (API version 7.26)
[ 1.274492] Key type asymmetric registered
[ 1.274493] Asymmetric key parser 'x509' registered
[ 1.274515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.274561] io scheduler noop registered
[ 1.274562] io scheduler deadline registered
[ 1.274594] io scheduler cfq registered (default)
[ 1.275505] pcieport 0000:00:1c.0: AER enabled with IRQ 121
[ 1.275524] pcieport 0000:00:1c.3: AER enabled with IRQ 122
[ 1.275544] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[ 1.275558] pcieport 0000:00:01.0: Signaling PME with IRQ 120
[ 1.275567] pcieport 0000:00:1c.0: Signaling PME with IRQ 121
[ 1.275576] pcieport 0000:00:1c.3: Signaling PME with IRQ 122
[ 1.275586] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 1.275640] efifb: probing for efifb
[ 1.275652] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 1.275653] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.275654] efifb: scrolling: redraw
[ 1.275655] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.275742] Console: switching to colour frame buffer device 240x67
[ 1.275766] fb0: EFI VGA frame buffer device
[ 1.275773] intel_idle: MWAIT substates: 0x11142120
[ 1.275774] intel_idle: v0.4.1 model 0x9E
[ 1.275975] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.276340] ACPI: AC Adapter [ADP1] (on-line)
[ 1.276408] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:49/PNP0C09:01/PNP0C0D:00/input/input0
[ 1.276457] ACPI: Lid Switch [LID0]
[ 1.276493] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.276503] ACPI: Sleep Button [SLPB]
[ 1.276528] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.276536] ACPI: Power Button [PWRB]
[ 1.276563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.276606] ACPI: Power Button [PWRF]
[ 1.337653] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.338112] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.338114] ACPI: Thermal Zone [THRM] (48 C)
[ 1.396492] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.396494] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.396720] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.396721] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.397001] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.400297] Linux agpgart interface v0.103
[ 1.402885] loop: module loaded
[ 1.403021] libphy: Fixed MDIO Bus: probed
[ 1.403022] tun: Universal TUN/TAP device driver, 1.6
[ 1.403076] PPP generic driver version 2.4.2
[ 1.403150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.403151] ehci-pci: EHCI PCI platform driver
[ 1.403159] ehci-platform: EHCI generic platform driver
[ 1.403167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.403169] ohci-pci: OHCI PCI platform driver
[ 1.403176] ohci-platform: OHCI generic platform driver
[ 1.403182] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.403421] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.403426] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.404524] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.404529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.404666] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.404668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404669] usb usb1: Product: xHCI Host Controller
[ 1.404670] usb usb1: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
[ 1.404672] usb usb1: SerialNumber: 0000:00:14.0
[ 1.404805] hub 1-0:1.0: USB hub found
[ 1.404821] hub 1-0:1.0: 16 ports detected
[ 1.406521] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.406524] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.406552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.406553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.406555] usb usb2: Product: xHCI Host Controller
[ 1.406556] usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
[ 1.406557] usb usb2: SerialNumber: 0000:00:14.0
[ 1.406685] hub 2-0:1.0: USB hub found
[ 1.406695] hub 2-0:1.0: 8 ports detected
[ 1.407807] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.411836] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.411839] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.412021] mousedev: PS/2 mouse device common for all mice
[ 1.412408] rtc_cmos 00:04: RTC can wake from S4
[ 1.412801] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.412881] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.412887] i2c /dev entries driver
[ 1.412926] device-mapper: uevent: version 1.0.3
[ 1.413001] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.413004] intel_pstate: Intel P-state driver initializing
[ 1.413031] intel_pstate: Disabling energy efficiency optimization
[ 1.413469] intel_pstate: HWP enabled
[ 1.413728] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.413729] EFI Variables Facility v0.08 2004-May-17
[ 1.423746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.434845] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[ 1.434848] caller pmc_core_probe+0x99/0x224 mapping multiple BARs
[ 1.434856] intel_pmc_core: initialized
[ 1.435027] NET: Registered protocol family 10
[ 1.438668] Segment Routing with IPv6
[ 1.438680] NET: Registered protocol family 17
[ 1.438798] Key type dns_resolver registered
[ 1.439199] RAS: Correctable Errors collector initialized.
[ 1.439217] microcode: sig=0x906e9, pf=0x20, revision=0x84
[ 1.439373] microcode: Microcode Update Driver: v2.2.
[ 1.439379] sched_clock: Marking stable (1439370292, 0)->(1418680284, 20690008)
[ 1.439826] registered taskstats version 1
[ 1.439832] Loading compiled-in X.509 certificates
[ 1.441819] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb'
[ 1.442665] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.442680] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.444968] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.445671] zswap: loaded using pool lzo/zbud
[ 1.448630] Key type big_key registered
[ 1.448633] Key type trusted registered
[ 1.449823] Key type encrypted registered
[ 1.449825] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.449827] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.449837] evm: HMAC attrs: 0x1
[ 1.450875] Magic number: 10:128:555
[ 1.450905] acpi PNP0C0F:06: hash matches
[ 1.451084] rtc_cmos 00:04: setting system clock to 2018-07-16 23:30:59 UTC (1531783859)
[ 1.451214] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.451214] EDD information not available.
[ 1.508300] ACPI: Battery Slot [BAT1] (battery present)
[ 1.510456] Freeing unused kernel memory: 2408K
[ 1.536059] Write protecting the kernel read-only data: 20480k
[ 1.536561] Freeing unused kernel memory: 2008K
[ 1.539036] Freeing unused kernel memory: 1904K
[ 1.543211] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.543212] x86/mm: Checking user space page tables
[ 1.547274] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.642223] ahci 0000:00:17.0: version 3.0
[ 1.652455] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
[ 1.652458] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.654881] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [30:9c:23:8c:d2:db]
[ 1.656127] nvme nvme0: pci function 0000:04:00.0
[ 1.656520] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.666844] MXM: GUID detected in BIOS
[ 1.666890] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 1.666960] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 1.667270] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.667273] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.667273] nouveau: detected PR support, will not use DSM
[ 1.667292] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.667401] checking generic (b0000000 7f0000) vs hw (c0000000 10000000)
[ 1.667401] checking generic (b0000000 7f0000) vs hw (d0000000 2000000)
[ 1.667449] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
[ 1.668889] scsi host0: ahci
[ 1.670632] scsi host1: ahci
[ 1.670856] scsi host2: ahci
[ 1.671069] scsi host3: ahci
[ 1.671092] ata1: DUMMY
[ 1.671093] ata2: DUMMY
[ 1.671100] ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 125
[ 1.671111] ata4: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b280 irq 125
[ 1.673867] [drm] Memory usable by graphics device = 4096M
[ 1.673868] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 1.673869] fb: switching to inteldrmfb from EFI VGA
[ 1.673880] Console: switching to colour dummy device 80x25
[ 1.674105] [drm] Replacing VGA console driver
[ 1.680208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.680208] [drm] Driver supports precise vblank timestamp query.
[ 1.682735] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.693989] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 1.703613] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.744080] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 1.803838] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.804275] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.804480] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 1.804528] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
[ 1.833024] fbcon: inteldrmfb (fb0) is primary device
[ 1.833075] Console: switching to colour frame buffer device 240x67
[ 1.833093] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.872797] nvme nvme0: missing or invalid SUBNQN field.
[ 1.872814] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.887755] nvme0n1: p1 p2
[ 1.898790] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[ 1.898792] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 1.898793] usb 1-7: Product: MSI EPF USB
[ 1.898794] usb 1-7: Manufacturer: MSI EPF USB
[ 1.898795] usb 1-7: SerialNumber: MSI EPF USB
[ 1.988363] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.988509] ata4: SATA link down (SStatus 4 SControl 300)
[ 2.021398] nouveau 0000:01:00.0: bios: version 86.07.2b.00.14
[ 2.024087] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 2.025881] ata3.00: ATA-10: ST1000LM048-2E7172, SDM1, max UDMA/133
[ 2.025882] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.077919] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[ 2.116600] vga_switcheroo: enabled
[ 2.116769] [TTM] Zone kernel: Available graphics memory: 4043428 kiB
[ 2.116770] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.116770] [TTM] Initializing pool allocator
[ 2.116772] [TTM] Initializing DMA pool allocator
[ 2.116781] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 2.116782] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 2.116784] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 2.116785] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 2.116786] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 2.116787] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 2.117677] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.117682] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.158003] ata3.00: configured for UDMA/133
[ 2.158347] scsi 2:0:0:0: Direct-Access ATA ST1000LM048-2E71 SDM1 PQ: 0 ANSI: 5
[ 2.158750] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.158785] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.158787] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2.158860] sd 2:0:0:0: [sda] Write Protect is off
[ 2.158862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.159004] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.177470] usb 1-10: New USB device found, idVendor=8087, idProduct=0aa7
[ 2.177471] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.209557] sda: sda1 sda2
[ 2.210834] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.272388] clocksource: Switched to clocksource tsc
[ 2.304140] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[ 2.360528] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[ 2.389676] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[ 2.389681] psmouse serio1: synaptics: Your touchpad (PNP: SYN1509 SYN1500 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.446571] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728
[ 2.452423] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[ 2.452424] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.452425] usb 1-12: Product: USB2.0-CRW
[ 2.452426] usb 1-12: Manufacturer: Generic
[ 2.452427] usb 1-12: SerialNumber: 20100201396000000
[ 2.456060] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.456487] usbcore: registered new interface driver rtsx_usb
[ 2.459578] usbcore: registered new interface driver usbhid
[ 2.459579] usbhid: USB HID core driver
[ 2.483548] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.801878] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.848315] [drm] RC6 on
[ 2.861582] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.904291] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.924265] systemd[1]: Detected architecture x86-64.
[ 2.926388] systemd[1]: Set hostname to <cyril-GL62M-7RDX>.
[ 2.974969] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.975124] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.975231] systemd[1]: Created slice System Slice.
[ 2.975271] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.975342] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.975367] systemd[1]: Listening on udev Kernel Socket.
[ 2.975414] systemd[1]: Listening on Journal Socket.
[ 2.985397] random: crng init done
[ 2.987169] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[ 2.992897] lp: driver loaded but no devices found
[ 3.004143] ppdev: user-space parallel port driver
[ 3.038771] systemd-journald[265]: Received request to flush runtime journal from PID 1
[ 3.046232] systemd-journald[265]: File /var/log/journal/6b492d78e8834cdd9dfdebabf1de0b2a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.047123] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.160472] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 3.160478] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 3.232453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.233558] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.236979] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.242894] Bluetooth: Core ver 2.22
[ 3.242903] NET: Registered protocol family 31
[ 3.242904] Bluetooth: HCI device and connection manager initialized
[ 3.242906] Bluetooth: HCI socket layer initialized
[ 3.242908] Bluetooth: L2CAP socket layer initialized
[ 3.242910] Bluetooth: SCO socket layer initialized
[ 3.276526] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.276785] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.278222] usbcore: registered new interface driver btusb
[ 3.278718] input: MSI WMI hotkeys as /devices/virtual/input/input9
[ 3.282563] Intel(R) Wireless WiFi driver for Linux
[ 3.282564] Copyright(c) 2003- 2015 Intel Corporation
[ 3.282602] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.288148] Bluetooth: hci0: read Intel version: 370810225019140f00
[ 3.291461] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 3.294393] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.294395] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.294395] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.294396] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.294396] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.294396] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.295140] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 3.308967] AVX2 version of gcm_enc/dec engaged.
[ 3.308968] AES CTR mode by8 optimization enabled
[ 3.313754] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[ 3.329538] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.331635] iwlwifi 0000:02:00.0: base HW address: 68:ec:c5:46:fb:04
[ 3.366272] intel_rapl: Found RAPL domain package
[ 3.366273] intel_rapl: Found RAPL domain core
[ 3.366274] intel_rapl: Found RAPL domain uncore
[ 3.366275] intel_rapl: Found RAPL domain dram
[ 3.372538] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.372989] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.373003] thermal thermal_zone5: failed to read out thermal zone (-61)
[ 3.423790] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.530184] Bluetooth: hci0: Intel firmware patch completed and activated
[ 4.413052] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.449468] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
[ 4.449470] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.449472] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.449472] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.449473] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 4.449474] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.449475] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.449476] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.464960] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 4.464995] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 4.465026] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.465055] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.465082] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.465111] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.465139] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.468270] audit: type=1400 audit(1531783862.513:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
[ 4.468272] audit: type=1400 audit(1531783862.513:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
[ 4.468273] audit: type=1400 audit(1531783862.513:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=615 comm="apparmor_parser"
[ 4.468275] audit: type=1400 audit(1531783862.513:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
[ 4.469542] audit: type=1400 audit(1531783862.513:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=627 comm="apparmor_parser"
[ 4.469544] audit: type=1400 audit(1531783862.513:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=627 comm="apparmor_parser"
[ 4.469546] audit: type=1400 audit(1531783862.513:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=627 comm="apparmor_parser"
[ 4.470841] audit: type=1400 audit(1531783862.513:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=616 comm="apparmor_parser"
[ 4.470843] audit: type=1400 audit(1531783862.513:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=616 comm="apparmor_parser"
[ 4.535723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.535725] Bluetooth: BNEP filters: protocol multicast
[ 4.535727] Bluetooth: BNEP socket layer initialized
[ 4.711242] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.711643] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.714619] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.794270] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.859478] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.951973] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 122124 [ IBUS ]
[ 5.172194] nouveau 0000:01:00.0: gr: intr 00000040
[ 6.146250] Bluetooth: RFCOMM TTY layer initialized
[ 6.146254] Bluetooth: RFCOMM socket layer initialized
[ 6.146257] Bluetooth: RFCOMM ver 1.11
[ 6.929548] rfkill: input handler disabled
[ 8.237196] wlp2s0: authenticate with 3c:17:10:31:ba:a4
[ 8.241443] wlp2s0: send auth to 3c:17:10:31:ba:a4 (try 1/3)
[ 8.248947] wlp2s0: authenticated
[ 8.252058] wlp2s0: associate with 3c:17:10:31:ba:a4 (try 1/3)
[ 8.258125] wlp2s0: RX AssocResp from 3c:17:10:31:ba:a4 (capab=0x431 status=0 aid=2)
[ 8.259773] wlp2s0: associated
[ 8.287079] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes readyEt oui j'ai testé la 18.04 en live-session et le résultat est le même.
Hors ligne
#6 Le 17/07/2018, à 02:22
- Coeur Noir
Re : [Résolu] Optimus et 18.04, pc bloqué
[ 1.667270] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.667273] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.667273] nouveau: detected PR support, will not use DSM
[ 1.667292] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.667401] checking generic (b0000000 7f0000) vs hw (c0000000 10000000)
[ 1.667401] checking generic (b0000000 7f0000) vs hw (d0000000 2000000)
[ 1.667449] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)Optimus → https://doc.ubuntu-fr.org/nvidia_optimus
cette doc, §3 a écrit :
sous Ubuntu, le gestionnaire de pilote propriétaires propose l'installation des pilotes propriétaires nVidia (en indiquant la mention "recommandé", ce qui induit l'utilisateur en erreur), il NE faut surtout PAS procéder à l'installation de ces pilotes, l'installation de ceux-ci résultera soit à un écran noir au prochain redémarrage, soit si on a de la chance, à une simple perte de l'accélération 3D fournie par la carte Intel, ce qui se verra par un basculement d'Unity vers Unity 2D et l'impossibilité d'utiliser un programme nécessitant des capacités 3D. La solution est de démarrer en mode de récupération si nécessaire pour accéder à un terminal, puis de lancer ceci : sudo apt-get purge nvidia-current, et normalement, l'accélération graphique devrait fonctionner de nouveau.
Est évoqué plus loin bumblebee mais qui ne fonctionne pas sous bionic. Il semble qu'il faut préférer https://doc.ubuntu-fr.org/prime. Qui lui a besoin du pilote proprio nvidia.
Je ne saurais pas t'aider davantage, donc avant de bidouiller dans tous les sens attends d'autres interventions.
Pour ce que j'en comprends :
- à priori ça devrait fonctionner sans intervention majeure si tu n'installes pas le pilote proprio nvidia ( peut-être pas top au niveau performances ? )
- si tu veux utiliser le pilote proprio, alors il faut passer par prime.
- bumblebee, marche pas sous zesty/bionic ( ou juste sous wayland ??? )
La situation avec optimus n'a pas l'air très claire aujourd'hui :
https://forum.ubuntu-fr.org/viewtopic.p … 19018&p=10
https://forum.ubuntu-fr.org/viewtopic.php?id=2009524
https://forum.ubuntu-fr.org/viewtopic.php?id=1976971
Ça peut paraître anachronique : aurais-tu plus de chance en testant ( live ) une 16.04LTS plutôt que la 18.04 ? La 16.04 est supportée jusqu'en 2021, et avant cette date tu pourrais basculer vers 18.04 quand elle prendra en charge ton pc ?
Dernière modification par Coeur Noir (Le 17/07/2018, à 02:40)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#7 Le 17/07/2018, à 11:02
- Valkera
Re : [Résolu] Optimus et 18.04, pc bloqué
J'ai déjà effectué la commande: sudo apt-get purge nvidia-current et le résultat fut le même.
Je vais essayer avec la version 16.04 LTS.
Hors ligne
#8 Le 17/07/2018, à 13:59
- Coeur Noir
Re : [Résolu] Optimus et 18.04, pc bloqué
Valkera, je t'ai proposé des liens vers des documentations et discussions.
Lis les intégralement, certaines font référence à MSI et évoquent des solutions.
Je n'ai pas de matériel optimus nvidia pour tester ici.
Par contre tu devrais peut-être changer le titre de ta discussion par : Optimus et 18.04, pc bloqué
C'est plus précis et fera venir des personnes concernées par le même problème...
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#9 Le 17/07/2018, à 23:51
- Valkera
Re : [Résolu] Optimus et 18.04, pc bloqué
PROBLÈME RESOLU !!
J'ai suivi ce tuto que tu m'avais proposé https://forum.ubuntu-fr.org/viewtopic.php?id=1976971
J'ai utilisé la version 18.04, cependant il y a quelques différences, prime indicator n'est plus disponible (enfin je crois), et dans la commande de la partie 5 :
sudo apt-get install nvidia-367 nvidia-libopencl1-367 nvidia-opencl-icd-367 nvidia-prime nvidia-settings mesa-utils prime-indicatorIl faut changer le numéro du driver (367 ici) par celui actuel (390 pour mon cas) et je n'ai pas pu installer nvidia-libopencl1 et nvidia-opencl-icd, cela a quand même fonctionné.
J'espère avoir été compréhensible et merci à Coeur Noir de m'avoir aidé et aussi à l'auteur de ce tutoriel.
Hors ligne
#10 Le 18/07/2018, à 00:19
- Coeur Noir
Re : [Résolu] Optimus et 18.04, pc bloqué
Nickel ! Et bravo ;-)
prime-indicator était sans doute spécifique à l'environnement Unity, à voir s'il n'y a pas une extension gnome équivalente…
Dernière modification par Coeur Noir (Le 18/07/2018, à 01:20)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#11 Le 26/07/2018, à 23:30
- Kuzti
Re : [Résolu] Optimus et 18.04, pc bloqué
Merci bcp pour ce petit tuto, je l'ai suivi pour Ubuntu 16.04 !
Seul petit problème, quand je connecte l'ordi à ma télé Samsung (smart tv) en HDMI, la télé est reconnu sur l'ordinateur (xrandr marque HDMI-1-2 comme connecté et je peux voir la télé dans les paramètres d'affichage)
Mais ma télé affiche "aucun cable connecté". Pourtant elle fonctionne avec un autre ordinateur HP également sous Ubuntu 16.04 avec le même cable HDMI.
J'ai essayé de brancher mon ordinateur a un écran d'ordi en VGA via a un adapteur VGA/Type-C et ça fonctionne également !
Tu n'as pas de problème similaire Valkera par hasard ?
Hors ligne
#12 Le 26/07/2018, à 23:40
- Valkera
Re : [Résolu] Optimus et 18.04, pc bloqué
Je viens d'essayer et le câble avec un câble HDMI et ça fonctionne très bien, rien à faire l’écran s'affiche directement sur la télé.
Je ne saurais t'aider d'avantage, désolé ^^
Hors ligne
#13 Le 27/07/2018, à 09:09
- malbo
Re : [Résolu] Optimus et 18.04, pc bloqué
Je viens d'ajouter ton modèle d'ordi GL62M 7RDX-2646XFR dans la Liste des portables « MSI »
Pour mémoire, ce modèle qui est visible sur cette page est équipé d'un processeur Intel Core i5-7300HQ et d'une carte graphique dédiée Nvidia GeForce GTX 1050
Dernière modification par malbo (Le 27/07/2018, à 09:10)
Hors ligne
Pages : 1