Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 20/11/2019, à 14:35

quicky

Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Bonjour,

J ai un Laptop Clevo avec comme disque un  SSD ADATA 1T SX6000 Pro PCIe M.2 qui tourne une Ubuntu LTS 18.04
Globalement les performances sont bonnes mais une ou deux fois il m est arrive d avoir un freeze complet du PC qui m a oblige a rebooter et j ai quelques fois des freeze de quelques secondes.
En regardant ce que dit 

dmesg

j observe ces messages

[  900.590839] pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
[  900.590843] pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  900.590846] pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
[  900.590847] pcieport 0000:00:1d.4:    [ 0] RxErr                

[ 1414.475147] nvme nvme0: I/O 83 QID 2 timeout, aborting
[ 1414.491001] pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
[ 1414.491013] pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1414.491021] pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
[ 1414.491026] pcieport 0000:00:1d.4:    [ 0] RxErr                 
[ 1414.606793] nvme nvme0: Abort status: 0x0
[ 1452.375391] pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
[ 1452.375400] pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1452.375405] pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
[ 1452.375409] pcieport 0000:00:1d.4:    [ 0] RxErr                
[ 1813.818228] nvme nvme0: I/O 534 QID 1 timeout, aborting
[ 1813.834086] pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
[ 1813.834099] pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1813.834110] pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
[ 1813.834117] pcieport 0000:00:1d.4:    [ 0] RxErr                 
[ 1813.949932] nvme nvme0: Abort status: 0x0

Est ce que vous avez deja rencontre ca ?
Les recherches que j ai fait sur le net m ont surtout permis de trouver des choses comme modifier grub pour rajouter 

pci=noaer

mais je me demande si ca pourrait indiquer un probleme hardware ou alors une mauvaise gestion par l OS ?

Hors ligne

#2 Le 20/11/2019, à 15:18

inbox

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Salut,

D'après ce sujet, l'option à ajouter est pci=nomsi. C'est à mettre à la place de pci=noaer.

N'oublie pas de mettre Grub à jour après avoir ajouté l'option de démarrage.

A+

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 20/11/2019, à 15:25

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

inbox a écrit :

Salut,

D'après ce sujet, l'option à ajouter est pci=nomsi. C'est à mettre à la place de pci=noaer.

N'oublie pas de mettre Grub à jour après avoir ajouté l'option de démarrage.

A+

merci ! mais globalement les logs n explosent pas, je prefererai savoir pourquoi j ai ces messages d erreur et resoudre le probleme plutot que les mettre sous le tapis  ;-)

Hors ligne

#4 Le 20/11/2019, à 15:47

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Boinjour
Pourrais-tu faire un rapport smartctl . Cela permettra de connaitre la référence exacte du SSD et surtout de son firmware afin de savoir s'il en existe une version plus récente
Paragraphes 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools

Dernière modification par geole (Le 20/11/2019, à 15:48)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#5 Le 20/11/2019, à 15:48

inbox

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Le problème semble être résolu sur la 19.10.

Quel noyau utilises-tu sur ta 18.04 ?

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#6 Le 20/11/2019, à 16:54

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

J'ai vu cette discussion assez ancienne
https://ubuntuplace.info/questions/3245 … d-on-linux

Il me semble que tu pourrais essayer avec l'option pcie_aspm=off

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#7 Le 20/11/2019, à 17:30

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

geole a écrit :

Boinjour
Pourrais-tu faire un rapport smartctl . Cela permettra de connaitre la référence exacte du SSD et surtout de son firmware afin de savoir s'il en existe une version plus récente
Paragraphes 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools

Voila

sudo smartctl -s on -a /dev/nvme0
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX6000PNP
Serial Number:                      2J2920163636
Firmware Version:                   V9001b31
PCI Vendor/Subsystem ID:            0x10ec
IEEE OUI Identifier:                0x00e04c
Controller ID:                      1
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1024209543168 [1,02 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Nov 20 17:29:15 2019 CET
Firmware Updates (0x02):            1 Slot
Optional Admin Commands (0x0006):   Format Frmw_DL
Optional NVM Commands (0x0014):     DS_Mngmt Sav/Sel_Feat
Maximum Data Transfer Size:         32 Pages
Warning  Comp. Temp. Threshold:     118 Celsius
Critical Comp. Temp. Threshold:     150 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +    50.00W       -        -    0  0  0  0        0       0

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        30 Celsius
Available Spare:                    100%
Available Spare Threshold:          32%
Percentage Used:                    0%
Data Units Read:                    14454200 [7,40 TB]
Data Units Written:                 14141104 [7,24 TB]
Host Read Commands:                 65374064
Host Write Commands:                57839558
Controller Busy Time:               0
Power Cycles:                       205
Power On Hours:                     137
Unsafe Shutdowns:                   52
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0

Error Information (NVMe Log 0x01, max 8 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0          1     0  0x0000  0x0000  0x000            0     0     -
  6 1219368206019409729     0  0x0000  0x0000  0x000            0     0     -

Hors ligne

#8 Le 20/11/2019, à 17:34

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

inbox a écrit :

Le problème semble être résolu sur la 19.10.

Quel noyau utilises-tu sur ta 18.04 ?

Celle ci

uname -mr
5.0.0-36-generic x86_64

Hors ligne

#9 Le 20/11/2019, à 17:46

NicoApi73

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Bonsoir,

Peux tu donner le retour de :

sudo lshw -numeric

Il faudrait voir quel est le module PCI qui est sur le bus 0000:00:1d.4

L'information supplémentaire est  [ 0] RxErr    et c'est systématiquement suivi de nvme nvme0: Abort status: 0x0. A voir si c'est lié.

EDIT : les paramètres pci=noaer pci=nomsi pcie_aspm=off ont un point commun : ils désactivent entre autre le reporting des erreurs...

Dernière modification par NicoApi73 (Le 20/11/2019, à 17:50)

Hors ligne

#10 Le 20/11/2019, à 18:05

inbox

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Comme tu utilises la version 5.* dur noyau, il s'agit de celui de la 19.10. On peut donc supposer que le problème n'est pas réglé avec la dernière version.

Toutefois, et pour confirmer ou infirmer, peux-tu tester en live session de la 19.10 et vérifier les logs système. Cela permettra de voir si tu retrouves les mêmes messages qu'actuellement.

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#11 Le 20/11/2019, à 18:44

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

NicoApi73 a écrit :

Bonsoir,

Peux tu donner le retour de :

sudo lshw -numeric

Il faudrait voir quel est le module PCI qui est sur le bus 0000:00:1d.4

L'information supplémentaire est  [ 0] RxErr    et c'est systématiquement suivi de nvme nvme0: Abort status: 0x0. A voir si c'est lié.

Voila le resultat de la commande. Je pense que c est le controleur qui permet au SSD PCIe d etre sur le bus

n150zu
    description: Notebook
    product: N150ZU (Not Applicable)
    vendor: PC Specialist LTD
    version: Not Applicable
    serial: Not Applicable
    width: 64 bits
    capabilities: smbios-3.0 dmi-3.0 smp vsyscall32
    configuration: boot=normal chassis=notebook family=Not Applicable sku=Not Applicable uuid=000096F0-0000-0010-8000-80FA5B6F5108
  *-core
       description: Motherboard
       product: N150ZU
       vendor: CLEVO
       physical id: 0
       version: Not Applicable
       serial: Not Applicable
       slot: Not Applicable
     *-firmware
          description: BIOS
          vendor: INSYDE Corp.
          physical id: 0
          version: 1.07.04TPCS1
          date: 01/03/2019
          size: 128KiB
          capacity: 10176KiB
          capabilities: pci upgrade shadowing cdboot bootselect edd int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          product: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz
          serial: To Be Filled By O.E.M.
          slot: U3E1
          size: 3764MHz
          capacity: 4005MHz
          width: 64 bits
          clock: 100MHz
          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d arch_capabilities cpufreq
          configuration: cores=4 enabledcores=4 threads=8
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1 Cache
             size: 256KiB
             capacity: 256KiB
             capabilities: synchronous internal write-back unified
             configuration: level=1
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2 Cache
             size: 1MiB
             capacity: 1MiB
             capabilities: synchronous internal write-back unified
             configuration: level=2
        *-cache:2
             description: L3 cache
             physical id: 7
             slot: L3 Cache
             size: 6MiB
             capacity: 6MiB
             capabilities: synchronous internal write-back unified
             configuration: level=3
     *-memory
          description: System Memory
          physical id: 1b
          slot: System board or motherboard
          size: 16GiB
        *-bank:0
             description: SODIMM DDR4 Synchronous 2400 MHz (0,4 ns)
             product: CM4X8GF2400C16S4
             vendor: AMI
             physical id: 0
             serial: 00000000
             slot: ChannelA-DIMM0
             size: 8GiB
             width: 64 bits
             clock: 2400MHz (0.4ns)
        *-bank:1
             description: SODIMM DDR4 Synchronous 2400 MHz (0,4 ns)
             product: CM4X8GF2400C16S4
             vendor: AMI
             physical id: 1
             serial: 00000000
             slot: ChannelB-DIMM0
             size: 8GiB
             width: 64 bits
             clock: 2400MHz (0.4ns)
     *-pci
          description: Host bridge
          product: Intel Corporation [8086:3E34]
          vendor: Intel Corporation [8086]
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 0b
          width: 32 bits
          clock: 33MHz
        *-display
             description: VGA compatible controller
             product: Intel Corporation [8086:3EA0]
             vendor: Intel Corporation [8086]
             physical id: 2
             bus info: pci@0000:00:02.0
             logical name: /dev/fb0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pciexpress msi pm vga_controller bus_master cap_list rom fb
             configuration: depth=32 driver=i915 latency=0 mode=1920x1080 visual=truecolor xres=1920 yres=1080
             resources: iomemory:600-5ff iomemory:400-3ff irq:131 memory:6000000000-6000ffffff memory:4000000000-400fffffff ioport:4000(size=64) memory:c0000-dffff
        *-generic
             description: Signal processing controller
             product: Intel Corporation [8086:9DF9]
             vendor: Intel Corporation [8086]
             physical id: 12
             bus info: pci@0000:00:12.0
             version: 30
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=intel_pch_thermal latency=0
             resources: iomemory:600-5ff irq:16 memory:600110a000-600110afff
        *-usb
             description: USB controller
             product: Intel Corporation [8086:9DED]
             vendor: Intel Corporation [8086]
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 30
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:126 memory:79b00000-79b0ffff
           *-usbhost:0
                product: xHCI Host Controller [1D6B:2]
                vendor: Linux 5.0.0-36-generic xhci-hcd [1D6B]
                physical id: 0
                bus info: usb@1
                logical name: usb1
                version: 5.00
                capabilities: usb-2.00
                configuration: driver=hub slots=12 speed=480Mbit/s
              *-usb:0 UNCLAIMED
                   description: Generic USB device
                   vendor: Synaptics, Inc. [6CB]
                   physical id: 6
                   bus info: usb@1:6
                   version: 1.54
                   serial: 00a794005634
                   capabilities: usb-2.00
                   configuration: maxpower=100mA speed=12Mbit/s
              *-usb:1
                   description: Video
                   product: BisonCam,NB Pro [5986:9102]
                   vendor: Sonix Technology Co., Ltd. [5986]
                   physical id: 7
                   bus info: usb@1:7
                   version: 6.01
                   capabilities: usb-2.00
                   configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
              *-usb:2
                   description: Bluetooth wireless interface
                   vendor: Intel Corp. [8087]
                   physical id: a
                   bus info: usb@1:a
                   version: 0.02
                   capabilities: bluetooth usb-2.00
                   configuration: driver=btusb maxpower=100mA speed=12Mbit/s
           *-usbhost:1
                product: xHCI Host Controller [1D6B:3]
                vendor: Linux 5.0.0-36-generic xhci-hcd [1D6B]
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 5.00
                capabilities: usb-3.00
                configuration: driver=hub slots=6 speed=5000Mbit/s
        *-memory UNCLAIMED
             description: RAM memory
             product: Intel Corporation [8086:9DEF]
             vendor: Intel Corporation [8086]
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 30
             width: 64 bits
             clock: 33MHz (30.3ns)
             capabilities: pm bus_master cap_list
             configuration: latency=0
             resources: iomemory:600-5ff iomemory:600-5ff memory:6001104000-6001105fff memory:6001109000-6001109fff
        *-serial:0
             description: Serial bus controller
             product: Intel Corporation [8086:9DE8]
             vendor: Intel Corporation [8086]
             physical id: 15
             bus info: pci@0000:00:15.0
             version: 30
             width: 64 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=intel-lpss latency=0
             resources: irq:16 memory:4010200000-4010200fff
        *-communication
             description: Communication controller
             product: Intel Corporation [8086:9DE0]
             vendor: Intel Corporation [8086]
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 30
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: iomemory:600-5ff irq:139 memory:6001107000-6001107fff
        *-storage
             description: SATA controller
             product: Intel Corporation [8086:9DD3]
             vendor: Intel Corporation [8086]
             physical id: 17
             bus info: pci@0000:00:17.0
             version: 30
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:128 memory:79b10000-79b11fff memory:79b14000-79b140ff ioport:4080(size=8) ioport:4088(size=4) ioport:4060(size=32) memory:79b13000-79b137ff
        *-pci:0
             description: PCI bridge
             product: Intel Corporation [8086:9DBC]
             vendor: Intel Corporation [8086]
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:122 ioport:5000(size=4096) memory:79c00000-79dfffff ioport:4010000000(size=2097152)
        *-pci:1
             description: PCI bridge
             product: Intel Corporation [8086:9DB0]
             vendor: Intel Corporation [8086]
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:123 ioport:3000(size=4096) memory:79a00000-79afffff
           *-generic
                description: Unassigned class
                product: RTL8411B PCI Express Card Reader [10EC:5287]
                vendor: Realtek Semiconductor Co., Ltd. [10EC]
                physical id: 0
                bus info: pci@0000:02:00.0
                version: 01
                width: 32 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list rom
                configuration: driver=rtsx_pci latency=0
                resources: irq:127 memory:79a05000-79a05fff memory:79a10000-79a1ffff
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
                vendor: Realtek Semiconductor Co., Ltd. [10EC]
                physical id: 0.1
                bus info: pci@0000:02:00.1
                logical name: enp2s0f1
                version: 12
                serial: 80:fa:5b:6f:51:08
                size: 10Mbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=half firmware=rtl8411-2_0.0.1 07/08/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                resources: irq:16 ioport:3000(size=256) memory:79a04000-79a04fff memory:79a00000-79a03fff
        *-pci:2
             description: PCI bridge
             product: Intel Corporation [8086:9DB1]
             vendor: Intel Corporation [8086]
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:124 memory:79900000-799fffff
           *-network
                description: Wireless interface
                product: Wireless-AC 9260 [8086:2526]
                vendor: Intel Corporation [8086]
                physical id: 0
                bus info: pci@0000:03:00.0
                logical name: wlp3s0
                version: 29
                serial: 08:71:90:82:04:d3
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-36-generic firmware=43.95eb4e97.0 ip=192.168.2.52 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                resources: irq:17 memory:79900000-79903fff
        *-pci:3
             description: PCI bridge
             product: Intel Corporation [8086:9DB4]
             vendor: Intel Corporation [8086]
             physical id: 1d.4
             bus info: pci@0000:00:1d.4
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:125 memory:79800000-798fffff
           *-storage
                description: Non-Volatile memory controller
                product: Realtek Semiconductor Co., Ltd. [10EC:5762]
                vendor: Realtek Semiconductor Co., Ltd. [10EC]
                physical id: 0
                bus info: pci@0000:04:00.0
                version: 01
                width: 64 bits
                clock: 33MHz
                capabilities: storage pm msi pciexpress msix nvm_express bus_master cap_list
                configuration: driver=nvme latency=0
                resources: irq:16 memory:79800000-79803fff memory:79804000-79805fff
        *-isa
             description: ISA bridge
             product: Intel Corporation [8086:9D84]
             vendor: Intel Corporation [8086]
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 30
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-multimedia
             description: Audio device
             product: Intel Corporation [8086:9DC8]
             vendor: Intel Corporation [8086]
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 30
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: iomemory:600-5ff iomemory:600-5ff irq:150 memory:6001100000-6001103fff memory:6001000000-60010fffff
        *-serial:1 UNCLAIMED
             description: SMBus
             product: Intel Corporation [8086:9DA3]
             vendor: Intel Corporation [8086]
             physical id: 1f.4
             bus info: pci@0000:00:1f.4
             version: 30
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
             resources: iomemory:600-5ff memory:6001106000-60011060ff ioport:4040(size=32)
        *-serial:2 UNCLAIMED
             description: Serial bus controller
             product: Intel Corporation [8086:9DA4]
             vendor: Intel Corporation [8086]
             physical id: 1f.5
             bus info: pci@0000:00:1f.5
             version: 30
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master
             configuration: latency=0
             resources: memory:fe010000-fe010fff
NicoApi73 a écrit :

EDIT : les paramètres pci=noaer pci=nomsi pcie_aspm=off ont un point commun : ils désactivent entre autre le reporting des erreurs...

C est ce que j ai cru comprendre en effet

Hors ligne

#12 Le 20/11/2019, à 18:46

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

inbox a écrit :

Comme tu utilises la version 5.* dur noyau, il s'agit de celui de la 19.10. On peut donc supposer que le problème n'est pas réglé avec la dernière version.

Toutefois, et pour confirmer ou infirmer, peux-tu tester en live session de la 19.10 et vérifier les logs système. Cela permettra de voir si tu retrouves les mêmes messages qu'actuellement.

OK faudra que j essaie ca mais la j ai pas assez de connection pour le faire.
Et comme ca se produit par intermittence faudra que j utilise assez longtemps pour voir si ca apparait

Dernière modification par quicky (Le 20/11/2019, à 18:46)

Hors ligne

#13 Le 20/11/2019, à 18:51

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

geole a écrit :

Peux-tu aussi exécuter cette commande qui regarde la trace

sudo journalctl    --no-pager --since  "2019-10-20 08:00" --until  "2019-10-20 10:00"   >Trace0.txt && gedit Trace0.txt

en remplaçant 08:00   par environ  1 heure avant l'incident
en remplaçant  10:00 par quelques minutes après l'incident
Tu posteras le contenu du fichier Trace0.txt

Voici la trace mais se sont les meme erreurs que mentionnees ci dessus d apres ce que je vois

-- Logs begin at Mon 2019-10-07 21:49:23 CEST, end at Wed 2019-11-20 18:36:44 CET. --
nov. 20 08:12:42 pseudo-N150ZU kernel: microcode: microcode updated early to revision 0xc6, date = 2019-08-14
nov. 20 08:12:42 pseudo-N150ZU kernel: Linux version 5.0.0-36-generic (buildd@lgw01-amd64-060) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #39~18.04.1-Ubuntu SMP Tue Nov 12 11:09:50 UTC 2019 (Ubuntu 5.0.0-36.39~18.04.1-generic 5.0.21)
nov. 20 08:12:42 pseudo-N150ZU kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-36-generic root=UUID=f49c3d1f-cf00-4418-ab9d-893498d82a03 ro quiet splash vt.handoff=1
nov. 20 08:12:42 pseudo-N150ZU kernel: KERNEL supported cpus:
nov. 20 08:12:42 pseudo-N150ZU kernel:   Intel GenuineIntel
nov. 20 08:12:42 pseudo-N150ZU kernel:   AMD AuthenticAMD
nov. 20 08:12:42 pseudo-N150ZU kernel:   Hygon HygonGenuine
nov. 20 08:12:42 pseudo-N150ZU kernel:   Centaur CentaurHauls
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-provided physical RAM map:
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000000100000-0x000000005b357fff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x000000005b358000-0x000000005bc57fff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x000000005bc58000-0x0000000071e6efff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000071e6f000-0x000000007206efff] type 20
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x000000007206f000-0x000000007349efff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x000000007349f000-0x0000000073b8efff] ACPI NVS
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000073b8f000-0x0000000073c0efff] ACPI data
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000073c0f000-0x0000000073c0ffff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000073c10000-0x00000000797fffff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: BIOS-e820: [mem 0x0000000100000000-0x00000004847fffff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: NX (Execute Disable) protection: active
nov. 20 08:12:42 pseudo-N150ZU kernel: efi: EFI v2.60 by INSYDE Corp.
nov. 20 08:12:42 pseudo-N150ZU kernel: efi:  ACPI=0x73c0e000  ACPI 2.0=0x73c0e014  SMBIOS=0x72223000  SMBIOS 3.0=0x72221000  ESRT=0x7221f898  MEMATTR=0x615da018 
nov. 20 08:12:42 pseudo-N150ZU kernel: secureboot: Secure boot could not be determined (mode 0)
nov. 20 08:12:42 pseudo-N150ZU kernel: SMBIOS 3.0.1 present.
nov. 20 08:12:42 pseudo-N150ZU kernel: DMI: PC Specialist LTD N150ZU                          /N150ZU                          , BIOS 1.07.04TPCS1 01/03/2019
nov. 20 08:12:42 pseudo-N150ZU kernel: tsc: Detected 1800.000 MHz processor
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
nov. 20 08:12:42 pseudo-N150ZU kernel: last_pfn = 0x484800 max_arch_pfn = 0x400000000
nov. 20 08:12:42 pseudo-N150ZU kernel: MTRR default type: write-back
nov. 20 08:12:42 pseudo-N150ZU kernel: MTRR fixed ranges enabled:
nov. 20 08:12:42 pseudo-N150ZU kernel:   00000-9FFFF write-back
nov. 20 08:12:42 pseudo-N150ZU kernel:   A0000-BFFFF uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   C0000-FFFFF write-protect
nov. 20 08:12:42 pseudo-N150ZU kernel: MTRR variable ranges enabled:
nov. 20 08:12:42 pseudo-N150ZU kernel:   0 base 0080000000 mask 7F80000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   1 base 0078000000 mask 7FF8000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   2 base 0076000000 mask 7FFE000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   3 base 0075000000 mask 7FFF000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   4 base 2000000000 mask 6000000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   5 base 1000000000 mask 7000000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   6 base 0800000000 mask 7800000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   7 base 4000000000 mask 4000000000 uncachable
nov. 20 08:12:42 pseudo-N150ZU kernel:   8 disabled
nov. 20 08:12:42 pseudo-N150ZU kernel:   9 disabled
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
nov. 20 08:12:42 pseudo-N150ZU kernel: last_pfn = 0x73c10 max_arch_pfn = 0x400000000
nov. 20 08:12:42 pseudo-N150ZU kernel: esrt: Reserving ESRT space from 0x000000007221f898 to 0x000000007221f8d0.
nov. 20 08:12:42 pseudo-N150ZU kernel: check: Scanning 1 areas for low memory corruption
nov. 20 08:12:42 pseudo-N150ZU kernel: Using GB pages for direct mapping
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7801000, 0x3f7801fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7802000, 0x3f7802fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7803000, 0x3f7803fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7804000, 0x3f7804fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7805000, 0x3f7805fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7806000, 0x3f7806fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7807000, 0x3f7807fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7808000, 0x3f7808fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f7809000, 0x3f7809fff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: BRK [0x3f780a000, 0x3f780afff] PGTABLE
nov. 20 08:12:42 pseudo-N150ZU kernel: RAMDISK: [mem 0x3083b000-0x34414fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Early table checksum verification disabled
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: RSDP 0x0000000073C0E014 000024 (v02 INSYDE)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: XSDT 0x0000000073C0E120 0000AC (v01 INSYDE H2O BIOS 00000002      01000013)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: FACP 0x0000000073C00000 000114 (v06 INSYDE H2O BIOS 00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: DSDT 0x0000000073BD0000 02C24F (v02 INSYDE H2O BIOS 00000000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: FACS 0x0000000073B30000 000040
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: UEFI 0x0000000073C0D000 000236 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0x0000000073C0B000 001B1C (v02 CpuRef CpuSsdt  00003000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0x0000000073C08000 002FF9 (v02 SaSsdt SaSsdt   00003000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: UEFI 0x0000000073C07000 000042 (v01 INTEL  CFL-ULT  00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: WSMT 0x0000000073C05000 000028 (v01 INTEL  KBL      00000000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0x0000000073C04000 000C2F (v02 INTEL  PtidDevc 00001000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: DBGP 0x0000000073C03000 000034 (v01 INSYDE          00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: DBG2 0x0000000073C02000 000054 (v00 INSYDE          00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: ASF! 0x0000000073C01000 0000A5 (v32 INSYDE H2O BIOS 00000001 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: HPET 0x0000000073BFF000 000038 (v01 INSYDE H2O BIOS 00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: APIC 0x0000000073BFE000 00012C (v03 INSYDE H2O BIOS 00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: MCFG 0x0000000073BFD000 00003C (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0x0000000073BCF000 0008B7 (v02 INSYDE H2O BIOS 00001000 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: DMAR 0x0000000073BCE000 0000A8 (v01 INTEL  EDK2     00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: FPDT 0x0000000073BCD000 000044 (v01 INTEL  CFL-ULT  00000002 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: BGRT 0x0000000073BCC000 000038 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Local APIC address 0xfee00000
nov. 20 08:12:42 pseudo-N150ZU kernel: No NUMA configuration found
nov. 20 08:12:42 pseudo-N150ZU kernel: Faking a node at [mem 0x0000000000000000-0x00000004847fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: NODE_DATA(0) allocated [mem 0x4847d5000-0x4847fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: Zone ranges:
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   Normal   [mem 0x0000000100000000-0x00000004847fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   Device   empty
nov. 20 08:12:42 pseudo-N150ZU kernel: Movable zone start for each node
nov. 20 08:12:42 pseudo-N150ZU kernel: Early memory node ranges
nov. 20 08:12:42 pseudo-N150ZU kernel:   node   0: [mem 0x0000000000001000-0x000000000009efff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   node   0: [mem 0x0000000000100000-0x000000005b357fff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   node   0: [mem 0x000000005bc58000-0x0000000071e6efff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   node   0: [mem 0x0000000073c0f000-0x0000000073c0ffff]
nov. 20 08:12:42 pseudo-N150ZU kernel:   node   0: [mem 0x0000000100000000-0x00000004847fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: Zeroed struct page in unavailable ranges: 27378 pages
nov. 20 08:12:42 pseudo-N150ZU kernel: Initmem setup node 0 [mem 0x0000000000001000-0x00000004847fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: On node 0 totalpages: 4152590
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA zone: 64 pages used for memmap
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA zone: 22 pages reserved
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA zone: 3998 pages, LIFO batch:0
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA32 zone: 7190 pages used for memmap
nov. 20 08:12:42 pseudo-N150ZU kernel:   DMA32 zone: 460144 pages, LIFO batch:63
nov. 20 08:12:42 pseudo-N150ZU kernel:   Normal zone: 57632 pages used for memmap
nov. 20 08:12:42 pseudo-N150ZU kernel:   Normal zone: 3688448 pages, LIFO batch:63
nov. 20 08:12:42 pseudo-N150ZU kernel: Reserving Intel graphics memory at [mem 0x75800000-0x797fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: PM-Timer IO Port: 0x1808
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Local APIC address 0xfee00000
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
nov. 20 08:12:42 pseudo-N150ZU kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: IRQ0 used by override.
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: IRQ9 used by override.
nov. 20 08:12:42 pseudo-N150ZU kernel: Using ACPI (MADT) for SMP configuration information
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
nov. 20 08:12:42 pseudo-N150ZU kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x5b358000-0x5bc57fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x71e6f000-0x7206efff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x7206f000-0x7349efff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x7349f000-0x73b8efff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x73b8f000-0x73c0efff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x73c10000-0x797fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0x79800000-0xdfffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registered nosave memory: [mem 0xff600000-0xffffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: [mem 0x79800000-0xdfffffff] available for PCI devices
nov. 20 08:12:42 pseudo-N150ZU kernel: Booting paravirtualized kernel on bare hardware
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
nov. 20 08:12:42 pseudo-N150ZU kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
nov. 20 08:12:42 pseudo-N150ZU kernel: percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
nov. 20 08:12:42 pseudo-N150ZU kernel: pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
nov. 20 08:12:42 pseudo-N150ZU kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
nov. 20 08:12:42 pseudo-N150ZU kernel: Built 1 zonelists, mobility grouping on.  Total pages: 4087682
nov. 20 08:12:42 pseudo-N150ZU kernel: Policy zone: Normal
nov. 20 08:12:42 pseudo-N150ZU kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-36-generic root=UUID=f49c3d1f-cf00-4418-ab9d-893498d82a03 ro quiet splash vt.handoff=1
nov. 20 08:12:42 pseudo-N150ZU kernel: Calgary: detecting Calgary via BIOS EBDA area
nov. 20 08:12:42 pseudo-N150ZU kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
nov. 20 08:12:42 pseudo-N150ZU kernel: Memory: 16090760K/16610360K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 519600K reserved, 0K cma-reserved)
nov. 20 08:12:42 pseudo-N150ZU kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
nov. 20 08:12:42 pseudo-N150ZU kernel: ftrace: allocating 41686 entries in 163 pages
nov. 20 08:12:42 pseudo-N150ZU kernel: rcu: Hierarchical RCU implementation.
nov. 20 08:12:42 pseudo-N150ZU kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
nov. 20 08:12:42 pseudo-N150ZU kernel:         Tasks RCU enabled.
nov. 20 08:12:42 pseudo-N150ZU kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
nov. 20 08:12:42 pseudo-N150ZU kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
nov. 20 08:12:42 pseudo-N150ZU kernel: NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
nov. 20 08:12:42 pseudo-N150ZU kernel: vt handoff: transparent VT on vt#1
nov. 20 08:12:42 pseudo-N150ZU kernel: Console: colour dummy device 80x25
nov. 20 08:12:42 pseudo-N150ZU kernel: printk: console [tty0] enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Core revision 20181213
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: hpet clockevent registered
nov. 20 08:12:42 pseudo-N150ZU kernel: APIC: Switch to symmetric I/O mode setup
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: Host address width 39
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: DRHD base: 0x000000fed90000 flags: 0x0
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: DRHD base: 0x000000fed91000 flags: 0x1
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: RMRR base: 0x0000007347e000 end: 0x0000007349dfff
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR: RMRR base: 0x00000075000000 end: 0x000000797fffff
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed91000
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
nov. 20 08:12:42 pseudo-N150ZU kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
nov. 20 08:12:42 pseudo-N150ZU kernel: x2apic enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: Switched APIC routing to cluster x2apic.
nov. 20 08:12:42 pseudo-N150ZU kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000)
nov. 20 08:12:42 pseudo-N150ZU kernel: pid_max: default: 32768 minimum: 301
nov. 20 08:12:42 pseudo-N150ZU kernel: LSM: Security Framework initializing
nov. 20 08:12:42 pseudo-N150ZU kernel: Yama: becoming mindful.
nov. 20 08:12:42 pseudo-N150ZU kernel: AppArmor: AppArmor initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
nov. 20 08:12:42 pseudo-N150ZU kernel: ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
nov. 20 08:12:42 pseudo-N150ZU kernel: mce: CPU0: Thermal monitoring enabled (TM1)
nov. 20 08:12:42 pseudo-N150ZU kernel: process: using mwait in idle threads
nov. 20 08:12:42 pseudo-N150ZU kernel: Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
nov. 20 08:12:42 pseudo-N150ZU kernel: Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V2 : Mitigation: Full generic retpoline
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
nov. 20 08:12:42 pseudo-N150ZU kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
nov. 20 08:12:42 pseudo-N150ZU kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
nov. 20 08:12:42 pseudo-N150ZU kernel: MDS: Mitigation: Clear CPU buffers
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing SMP alternatives memory: 36K
nov. 20 08:12:42 pseudo-N150ZU kernel: TSC deadline timer enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: smpboot: CPU0: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xb)
nov. 20 08:12:42 pseudo-N150ZU kernel: Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
nov. 20 08:12:42 pseudo-N150ZU kernel: ... version:                4
nov. 20 08:12:42 pseudo-N150ZU kernel: ... bit width:              48
nov. 20 08:12:42 pseudo-N150ZU kernel: ... generic registers:      4
nov. 20 08:12:42 pseudo-N150ZU kernel: ... value mask:             0000ffffffffffff
nov. 20 08:12:42 pseudo-N150ZU kernel: ... max period:             00007fffffffffff
nov. 20 08:12:42 pseudo-N150ZU kernel: ... fixed-purpose events:   3
nov. 20 08:12:42 pseudo-N150ZU kernel: ... event mask:             000000070000000f
nov. 20 08:12:42 pseudo-N150ZU kernel: rcu: Hierarchical SRCU implementation.
nov. 20 08:12:42 pseudo-N150ZU kernel: random: crng done (trusting CPU's manufacturer)
nov. 20 08:12:42 pseudo-N150ZU kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
nov. 20 08:12:42 pseudo-N150ZU kernel: smp: Bringing up secondary CPUs ...
nov. 20 08:12:42 pseudo-N150ZU kernel: x86: Booting SMP configuration:
nov. 20 08:12:42 pseudo-N150ZU kernel: .... node  #0, CPUs:      #1 #2 #3 #4
nov. 20 08:12:42 pseudo-N150ZU kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
nov. 20 08:12:42 pseudo-N150ZU kernel:  #5 #6 #7
nov. 20 08:12:42 pseudo-N150ZU kernel: smp: Brought up 1 node, 8 CPUs
nov. 20 08:12:42 pseudo-N150ZU kernel: smpboot: Max logical packages: 1
nov. 20 08:12:42 pseudo-N150ZU kernel: smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
nov. 20 08:12:42 pseudo-N150ZU kernel: devtmpfs: initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/mm: Memory block size: 128MB
nov. 20 08:12:42 pseudo-N150ZU kernel: PM: Registering ACPI NVS region [mem 0x7349f000-0x73b8efff] (7274496 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: pinctrl core: initialized pinctrl subsystem
nov. 20 08:12:42 pseudo-N150ZU kernel: RTC time: 07:12:37, date: 2019-11-20
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 16
nov. 20 08:12:42 pseudo-N150ZU kernel: audit: initializing netlink subsys (disabled)
nov. 20 08:12:42 pseudo-N150ZU kernel: audit: type=2000 audit(1574233957.060:1): state=initialized audit_enabled=0 res=1
nov. 20 08:12:42 pseudo-N150ZU kernel: EISA bus registered
nov. 20 08:12:42 pseudo-N150ZU kernel: cpuidle: using governor ladder
nov. 20 08:12:42 pseudo-N150ZU kernel: cpuidle: using governor menu
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: bus type PCI registered
nov. 20 08:12:42 pseudo-N150ZU kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: Using configuration type 1 for base access
nov. 20 08:12:42 pseudo-N150ZU kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
nov. 20 08:12:42 pseudo-N150ZU kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Module Device)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Processor Device)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Processor Aggregator Device)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Linux-Dell-Video)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: 5 ACPI AML tables successfully acquired and loaded
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1B09D00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1B95400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1FE4000 0004FD (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1B7DA00 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1FE3000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1FE7800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1B93C00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B194E000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Dynamic OEM Table Load:
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: SSDT 0xFFFF9C47B1B90400 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: EC: EC started
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: EC: interrupt blocked
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Interpreter enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: (supports S0 S3 S4 S5)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Using IOAPIC for interrupt routing
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Enabled 6 GPEs in block 00 to 7F
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [USBC] (on)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [PXP] (off)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [V0PR] (on)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [V1PR] (on)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [V2PR] (on)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [WRST] (on)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Resource [PIN] (off)
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
nov. 20 08:12:42 pseudo-N150ZU kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
nov. 20 08:12:42 pseudo-N150ZU kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI host bridge to bus 0000:00
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [mem 0x79800000-0xdfffffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: root bus resource [bus 00-fe]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: BAR 2: assigned to efifb
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:12.0: reg 0x10: [mem 0x600110a000-0x600110afff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.0: reg 0x10: [mem 0x79b00000-0x79b0ffff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.2: reg 0x10: [mem 0x6001104000-0x6001105fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:14.2: reg 0x18: [mem 0x6001109000-0x6001109fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:16.0: reg 0x10: [mem 0x6001107000-0x6001107fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:16.0: PME# supported from D3hot
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x10: [mem 0x79b10000-0x79b11fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x14: [mem 0x79b14000-0x79b140ff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: reg 0x24: [mem 0x79b13000-0x79b137ff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:17.0: PME# supported from D3hot
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: [8086:9dbc] type 01 class 0x060400
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: PTM enabled (root), 4dns granularity
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: [8086:9db1] type 01 class 0x060400
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: PTM enabled (root), 4dns granularity
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4: PTM enabled (root), 4dns granularity
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040300
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.3: reg 0x10: [mem 0x6001100000-0x6001103fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.3: PME# supported from D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.4: reg 0x10: [mem 0x6001106000-0x60011060ff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: reg 0x10: [mem 0x79a05000-0x79a05fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: supports D1 D2
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: reg 0x10: [io  0x3000-0x30ff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: reg 0x18: [mem 0x79a04000-0x79a04fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: reg 0x20: [mem 0x79a00000-0x79a03fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: supports D1 D2
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0: PCI bridge to [bus 02]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0:   bridge window [mem 0x79a00000-0x79afffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:03:00.0: [8086:2526] type 00 class 0x028000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:03:00.0: reg 0x10: [mem 0x79900000-0x79903fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: ASPM: current common clock configuration is broken, reconfiguring
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: PCI bridge to [bus 03]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1:   bridge window [mem 0x79900000-0x799fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:04:00.0: [10ec:5762] type 00 class 0x010802
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:04:00.0: reg 0x10: [mem 0x79800000-0x79803fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:04:00.0: reg 0x24: [mem 0x79804000-0x79805fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4: PCI bridge to [bus 04]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4:   bridge window [mem 0x79800000-0x798fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: EC: interrupt unblocked
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: EC: event unblocked
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
nov. 20 08:12:42 pseudo-N150ZU kernel: SCSI subsystem initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: libata version 3.00 loaded.
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: vgaarb: bridge control possible
nov. 20 08:12:42 pseudo-N150ZU kernel: vgaarb: loaded
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: bus type USB registered
nov. 20 08:12:42 pseudo-N150ZU kernel: usbcore: registered new interface driver usbfs
nov. 20 08:12:42 pseudo-N150ZU kernel: usbcore: registered new interface driver hub
nov. 20 08:12:42 pseudo-N150ZU kernel: usbcore: registered new device driver usb
nov. 20 08:12:42 pseudo-N150ZU kernel: pps_core: LinuxPPS API ver. 1 registered
nov. 20 08:12:42 pseudo-N150ZU kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
nov. 20 08:12:42 pseudo-N150ZU kernel: PTP clock support registered
nov. 20 08:12:42 pseudo-N150ZU kernel: EDAC MC: Ver: 3.0.0
nov. 20 08:12:42 pseudo-N150ZU kernel: Registered efivars operations
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: Using ACPI for IRQ routing
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: pci_cache_line_size set to 64 bytes
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: reserve RAM buffer [mem 0x5b358000-0x5bffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: reserve RAM buffer [mem 0x71e6f000-0x73ffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: reserve RAM buffer [mem 0x73c10000-0x73ffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: e820: reserve RAM buffer [mem 0x484800000-0x487ffffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: NetLabel: Initializing
nov. 20 08:12:42 pseudo-N150ZU kernel: NetLabel:  domain hash size = 128
nov. 20 08:12:42 pseudo-N150ZU kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
nov. 20 08:12:42 pseudo-N150ZU kernel: NetLabel:  unlabeled traffic allowed by default
nov. 20 08:12:42 pseudo-N150ZU kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
nov. 20 08:12:42 pseudo-N150ZU kernel: hpet0: 8 comparators, 64-bit 24.000000 MHz counter
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: Switched to clocksource tsc-early
nov. 20 08:12:42 pseudo-N150ZU kernel: VFS: Disk quotas dquot_6.6.0
nov. 20 08:12:42 pseudo-N150ZU kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: AppArmor: AppArmor Filesystem Enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp: PnP ACPI init
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [io  0x1800-0x18fe] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:02: [io  0x2000-0x20fe] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp 00:03: disabling [io  0x3322-0x3323] because it overlaps 0000:00:1d.0 BAR 13 [io  0x3000-0x3fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:05: [io  0x1854-0x1857] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfed45000-0xfed8ffff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
nov. 20 08:12:42 pseudo-N150ZU kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
nov. 20 08:12:42 pseudo-N150ZU kernel: pnp: PnP ACPI: found 11 devices
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x79c00000-0x79dfffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x4010000000-0x40101fffff 64bit pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:15.0: BAR 0: assigned [mem 0x4010200000-0x4010200fff 64bit]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0:   bridge window [mem 0x79c00000-0x79dfffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1c.0:   bridge window [mem 0x4010000000-0x40101fffff 64bit pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0x79a10000-0x79a1ffff pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0: PCI bridge to [bus 02]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.0:   bridge window [mem 0x79a00000-0x79afffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1: PCI bridge to [bus 03]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.1:   bridge window [mem 0x79900000-0x799fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4: PCI bridge to [bus 04]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:1d.4:   bridge window [mem 0x79800000-0x798fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 7 [mem 0x79800000-0xdfffffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:01: resource 1 [mem 0x79c00000-0x79dfffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:01: resource 2 [mem 0x4010000000-0x40101fffff 64bit pref]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:02: resource 1 [mem 0x79a00000-0x79afffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:03: resource 1 [mem 0x79900000-0x799fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: pci_bus 0000:04: resource 1 [mem 0x79800000-0x798fffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 2
nov. 20 08:12:42 pseudo-N150ZU kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: TCP: Hash tables configured (established 131072 bind 65536)
nov. 20 08:12:42 pseudo-N150ZU kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 1
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 44
nov. 20 08:12:42 pseudo-N150ZU kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI: CLS 64 bytes, default 64
nov. 20 08:12:42 pseudo-N150ZU kernel: Unpacking initramfs...
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing initrd memory: 61288K
nov. 20 08:12:42 pseudo-N150ZU kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
nov. 20 08:12:42 pseudo-N150ZU kernel: software IO TLB: mapped [mem 0x6d121000-0x71121000] (64MB)
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
nov. 20 08:12:42 pseudo-N150ZU kernel: clocksource: Switched to clocksource tsc
nov. 20 08:12:42 pseudo-N150ZU kernel: check: Scanning for low memory corruption every 60 seconds
nov. 20 08:12:42 pseudo-N150ZU kernel: Initialise system trusted keyrings
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type blacklist registered
nov. 20 08:12:42 pseudo-N150ZU kernel: workingset: timestamp_bits=36 max_order=22 bucket_order=0
nov. 20 08:12:42 pseudo-N150ZU kernel: zbud: loaded
nov. 20 08:12:42 pseudo-N150ZU kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
nov. 20 08:12:42 pseudo-N150ZU kernel: fuse init (API version 7.28)
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type asymmetric registered
nov. 20 08:12:42 pseudo-N150ZU kernel: Asymmetric key parser 'x509' registered
nov. 20 08:12:42 pseudo-N150ZU kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
nov. 20 08:12:42 pseudo-N150ZU kernel: io scheduler mq-deadline registered
nov. 20 08:12:42 pseudo-N150ZU kernel: pcieport 0000:00:1c.0: Signaling PME with IRQ 122
nov. 20 08:12:42 pseudo-N150ZU kernel: aer 0000:00:1c.0:pcie002: AER enabled with IRQ 122
nov. 20 08:12:42 pseudo-N150ZU kernel: pciehp 0000:00:1c.0:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
nov. 20 08:12:42 pseudo-N150ZU kernel: dpc 0000:00:1c.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
nov. 20 08:12:42 pseudo-N150ZU kernel: pcieport 0000:00:1d.0: Signaling PME with IRQ 123
nov. 20 08:12:42 pseudo-N150ZU kernel: pcieport 0000:00:1d.1: Signaling PME with IRQ 124
nov. 20 08:12:42 pseudo-N150ZU kernel: aer 0000:00:1d.1:pcie002: AER enabled with IRQ 124
nov. 20 08:12:42 pseudo-N150ZU kernel: dpc 0000:00:1d.1:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
nov. 20 08:12:42 pseudo-N150ZU kernel: pcieport 0000:00:1d.4: Signaling PME with IRQ 125
nov. 20 08:12:42 pseudo-N150ZU kernel: aer 0000:00:1d.4:pcie002: AER enabled with IRQ 125
nov. 20 08:12:42 pseudo-N150ZU kernel: dpc 0000:00:1d.4:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
nov. 20 08:12:42 pseudo-N150ZU kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nov. 20 08:12:42 pseudo-N150ZU kernel: efifb: probing for efifb
nov. 20 08:12:42 pseudo-N150ZU kernel: efifb: framebuffer at 0x4000000000, using 8128k, total 8128k
nov. 20 08:12:42 pseudo-N150ZU kernel: efifb: mode is 1920x1080x32, linelength=7680, pages=1
nov. 20 08:12:42 pseudo-N150ZU kernel: efifb: scrolling: redraw
nov. 20 08:12:42 pseudo-N150ZU kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
nov. 20 08:12:42 pseudo-N150ZU kernel: Console: switching to colour frame buffer device 240x67
nov. 20 08:12:42 pseudo-N150ZU kernel: fb0: EFI VGA frame buffer device
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_idle: MWAIT substates: 0x11142120
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_idle: v0.4.1 model 0x8E
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: AC Adapter [AC] (on-line)
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Button [PWRB]
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Sleep Button [SLPB]
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Lid Switch [LID0]
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Power Button [PWRF]
nov. 20 08:12:42 pseudo-N150ZU kernel: thermal LNXTHERM:00: registered as thermal_zone0
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Thermal Zone [TZ0] (29 C)
nov. 20 08:12:42 pseudo-N150ZU kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: battery: ACPI: Battery Slot [BAT0] (battery present)
nov. 20 08:12:42 pseudo-N150ZU kernel: Linux agpgart interface v0.103
nov. 20 08:12:42 pseudo-N150ZU kernel: loop: module loaded
nov. 20 08:12:42 pseudo-N150ZU kernel: libphy: Fixed MDIO Bus: probed
nov. 20 08:12:42 pseudo-N150ZU kernel: tun: Universal TUN/TAP device driver, 1.6
nov. 20 08:12:42 pseudo-N150ZU kernel: PPP generic driver version 2.4.2
nov. 20 08:12:42 pseudo-N150ZU kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
nov. 20 08:12:42 pseudo-N150ZU kernel: ehci-pci: EHCI PCI platform driver
nov. 20 08:12:42 pseudo-N150ZU kernel: ehci-platform: EHCI generic platform driver
nov. 20 08:12:42 pseudo-N150ZU kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
nov. 20 08:12:42 pseudo-N150ZU kernel: ohci-pci: OHCI PCI platform driver
nov. 20 08:12:42 pseudo-N150ZU kernel: ohci-platform: OHCI generic platform driver
nov. 20 08:12:42 pseudo-N150ZU kernel: uhci_hcd: USB Universal Host Controller Interface driver
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb1: Product: xHCI Host Controller
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb1: Manufacturer: Linux 5.0.0-36-generic xhci-hcd
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb1: SerialNumber: 0000:00:14.0
nov. 20 08:12:42 pseudo-N150ZU kernel: hub 1-0:1.0: USB hub found
nov. 20 08:12:42 pseudo-N150ZU kernel: hub 1-0:1.0: 12 ports detected
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
nov. 20 08:12:42 pseudo-N150ZU kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb2: Product: xHCI Host Controller
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb2: Manufacturer: Linux 5.0.0-36-generic xhci-hcd
nov. 20 08:12:42 pseudo-N150ZU kernel: usb usb2: SerialNumber: 0000:00:14.0
nov. 20 08:12:42 pseudo-N150ZU kernel: hub 2-0:1.0: USB hub found
nov. 20 08:12:42 pseudo-N150ZU kernel: hub 2-0:1.0: 6 ports detected
nov. 20 08:12:42 pseudo-N150ZU kernel: usb: port power management may be unreliable
nov. 20 08:12:42 pseudo-N150ZU kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
nov. 20 08:12:42 pseudo-N150ZU kernel: i8042: Detected active multiplexing controller, rev 1.1
nov. 20 08:12:42 pseudo-N150ZU kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
nov. 20 08:12:42 pseudo-N150ZU kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
nov. 20 08:12:42 pseudo-N150ZU kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
nov. 20 08:12:42 pseudo-N150ZU kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
nov. 20 08:12:42 pseudo-N150ZU kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
nov. 20 08:12:42 pseudo-N150ZU kernel: mousedev: PS/2 mouse device common for all mice
nov. 20 08:12:42 pseudo-N150ZU kernel: rtc_cmos 00:04: RTC can wake from S4
nov. 20 08:12:42 pseudo-N150ZU kernel: rtc_cmos 00:04: registered as rtc0
nov. 20 08:12:42 pseudo-N150ZU kernel: rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
nov. 20 08:12:42 pseudo-N150ZU kernel: i2c /dev entries driver
nov. 20 08:12:42 pseudo-N150ZU kernel: device-mapper: uevent: version 1.0.3
nov. 20 08:12:42 pseudo-N150ZU kernel: device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Probing EISA bus 0
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: EISA: Cannot allocate resource for mainboard
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 1
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 2
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 3
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 4
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 5
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 6
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 7
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: Cannot allocate resource for EISA slot 8
nov. 20 08:12:42 pseudo-N150ZU kernel: platform eisa.0: EISA: Detected 0 cards
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_pstate: Intel P-state driver initializing
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_pstate: HWP enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: ledtrig-cpu: registered to indicate activity on CPUs
nov. 20 08:12:42 pseudo-N150ZU kernel: EFI Variables Facility v0.08 2004-May-17
nov. 20 08:12:42 pseudo-N150ZU kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
nov. 20 08:12:42 pseudo-N150ZU kernel: intel_pmc_core:  initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 10
nov. 20 08:12:42 pseudo-N150ZU kernel: Segment Routing with IPv6
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 17
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type dns_resolver registered
nov. 20 08:12:42 pseudo-N150ZU kernel: mce: Using 10 MCE banks
nov. 20 08:12:42 pseudo-N150ZU kernel: RAS: Correctable Errors collector initialized.
nov. 20 08:12:42 pseudo-N150ZU kernel: microcode: sig=0x806eb, pf=0x80, revision=0xc6
nov. 20 08:12:42 pseudo-N150ZU kernel: microcode: Microcode Update Driver: v2.2.
nov. 20 08:12:42 pseudo-N150ZU kernel: sched_clock: Marking stable (2859683993, 4746591)->(2879483005, -15052421)
nov. 20 08:12:42 pseudo-N150ZU kernel: registered taskstats version 1
nov. 20 08:12:42 pseudo-N150ZU kernel: Loading compiled-in X.509 certificates
nov. 20 08:12:42 pseudo-N150ZU kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 74e800c0955dd062b621f2c2b30b90827e35b348'
nov. 20 08:12:42 pseudo-N150ZU kernel: Couldn't get size: 0x800000000000000e
nov. 20 08:12:42 pseudo-N150ZU kernel: MODSIGN: Couldn't get UEFI db list
nov. 20 08:12:42 pseudo-N150ZU kernel: Couldn't get size: 0x800000000000000e
nov. 20 08:12:42 pseudo-N150ZU kernel: MODSIGN: Couldn't get UEFI MokListRT
nov. 20 08:12:42 pseudo-N150ZU kernel: zswap: loaded using pool lzo/zbud
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type big_key registered
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type trusted registered
nov. 20 08:12:42 pseudo-N150ZU kernel: Key type encrypted registered
nov. 20 08:12:42 pseudo-N150ZU kernel: AppArmor: AppArmor sha1 policy hashing enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: ima: No TPM chip found, activating TPM-bypass!
nov. 20 08:12:42 pseudo-N150ZU kernel: ima: Allocated hash algorithm: sha1
nov. 20 08:12:42 pseudo-N150ZU kernel: No architecture policies found
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: Initialising EVM extended attributes:
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.selinux
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.SMACK64
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.SMACK64EXEC
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.SMACK64TRANSMUTE
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.SMACK64MMAP
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.apparmor
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.ima
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: security.capability
nov. 20 08:12:42 pseudo-N150ZU kernel: evm: HMAC attrs: 0x1
nov. 20 08:12:42 pseudo-N150ZU kernel:   Magic number: 11:442:218
nov. 20 08:12:42 pseudo-N150ZU kernel: acpi device:69: hash matches
nov. 20 08:12:42 pseudo-N150ZU kernel: acpi device:3c: hash matches
nov. 20 08:12:42 pseudo-N150ZU kernel: memory memory100: hash matches
nov. 20 08:12:42 pseudo-N150ZU kernel: rtc_cmos 00:04: setting system clock to 2019-11-20T07:12:40 UTC (1574233960)
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing unused decrypted memory: 2040K
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing unused kernel image memory: 2588K
nov. 20 08:12:42 pseudo-N150ZU kernel: Write protecting the kernel read-only data: 22528k
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing unused kernel image memory: 2016K
nov. 20 08:12:42 pseudo-N150ZU kernel: Freeing unused kernel image memory: 1728K
nov. 20 08:12:42 pseudo-N150ZU kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
nov. 20 08:12:42 pseudo-N150ZU kernel: Run /init as init process
nov. 20 08:12:42 pseudo-N150ZU kernel: hidraw: raw HID events driver (C) Jiri Kosina
nov. 20 08:12:42 pseudo-N150ZU kernel: ahci 0000:00:17.0: version 3.0
nov. 20 08:12:42 pseudo-N150ZU kernel: ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
nov. 20 08:12:42 pseudo-N150ZU kernel: ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
nov. 20 08:12:42 pseudo-N150ZU kernel: scsi host0: ahci
nov. 20 08:12:42 pseudo-N150ZU kernel: ata1: SATA max UDMA/133 abar m2048@0x79b13000 port 0x79b13100 irq 128
nov. 20 08:12:42 pseudo-N150ZU kernel: nvme nvme0: pci function 0000:04:00.0
nov. 20 08:12:42 pseudo-N150ZU kernel: libphy: r8169: probed
nov. 20 08:12:42 pseudo-N150ZU kernel: r8169 0000:02:00.1 eth0: RTL8411, 80:fa:5b:6f:51:08, XID 5c8, IRQ 130
nov. 20 08:12:42 pseudo-N150ZU kernel: r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
nov. 20 08:12:42 pseudo-N150ZU kernel: r8169 0000:02:00.1 enp2s0f1: renamed from eth0
nov. 20 08:12:42 pseudo-N150ZU kernel: VFIO - User Level meta-driver version: 0.3
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-6: new full-speed USB device number 2 using xhci_hcd
nov. 20 08:12:42 pseudo-N150ZU kernel: checking generic (4000000000 7f0000) vs hw (4000000000 10000000)
nov. 20 08:12:42 pseudo-N150ZU kernel: fb0: switching to inteldrmfb from EFI VGA
nov. 20 08:12:42 pseudo-N150ZU kernel: Console: switching to colour dummy device 80x25
nov. 20 08:12:42 pseudo-N150ZU kernel: [drm] Replacing VGA console driver
nov. 20 08:12:42 pseudo-N150ZU kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
nov. 20 08:12:42 pseudo-N150ZU kernel: [drm] Driver supports precise vblank timestamp query.
nov. 20 08:12:42 pseudo-N150ZU kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
nov. 20 08:12:42 pseudo-N150ZU kernel: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
nov. 20 08:12:42 pseudo-N150ZU kernel: [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
nov. 20 08:12:42 pseudo-N150ZU kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
nov. 20 08:12:42 pseudo-N150ZU kernel: fbcon: inteldrmfb (fb0) is primary device
nov. 20 08:12:42 pseudo-N150ZU kernel: Console: switching to colour frame buffer device 240x67
nov. 20 08:12:42 pseudo-N150ZU kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-6: New USB device found, idVendor=06cb, idProduct=00a8, bcdDevice= 1.54
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-6: SerialNumber: 00a794005634
nov. 20 08:12:42 pseudo-N150ZU kernel: nvme nvme0: allocated 64 MiB host memory buffer.
nov. 20 08:12:42 pseudo-N150ZU kernel: nvme nvme0: 7/0/0 default/read/poll queues
nov. 20 08:12:42 pseudo-N150ZU kernel:  nvme0n1: p1 p2 p3 p4 p5 p6
nov. 20 08:12:42 pseudo-N150ZU kernel: ata1: SATA link down (SStatus 4 SControl 300)
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-7: new high-speed USB device number 3 using xhci_hcd
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-7: New USB device found, idVendor=5986, idProduct=9102, bcdDevice= 6.01
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-7: New USB device strings: Mfr=2, Product=1, SerialNumber=0
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-7: Product: BisonCam,NB Pro
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-7: Manufacturer: Sonix Technology Co., Ltd.
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-10: new full-speed USB device number 4 using xhci_hcd
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-10: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
nov. 20 08:12:42 pseudo-N150ZU kernel: usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
nov. 20 08:12:42 pseudo-N150ZU kernel: psmouse serio2: synaptics: queried max coordinates: x [..5658], y [..4722]
nov. 20 08:12:42 pseudo-N150ZU kernel: psmouse serio2: synaptics: queried min coordinates: x [1284..], y [1130..]
nov. 20 08:12:42 pseudo-N150ZU kernel: psmouse serio2: synaptics: Your touchpad (PNP: PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
nov. 20 08:12:42 pseudo-N150ZU kernel: psmouse serio2: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00123/0x840300/0x2e800/0x52c093, board id: 3428, fw id: 2839257
nov. 20 08:12:42 pseudo-N150ZU kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
nov. 20 08:12:42 pseudo-N150ZU kernel: EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Detected architecture x86-64.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Set hostname to <pseudo-N150ZU>.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Reached target User and Group Name Lookups.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Created slice System Slice.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Listening on udev Control Socket.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Listening on Journal Audit Socket.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Listening on Syslog Socket.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Created slice system-systemd\x2dfsck.slice.
nov. 20 08:12:42 pseudo-N150ZU kernel: EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
nov. 20 08:12:42 pseudo-N150ZU kernel: lp: driver loaded but no devices found
nov. 20 08:12:42 pseudo-N150ZU kernel: ppdev: user-space parallel port driver
nov. 20 08:12:42 pseudo-N150ZU systemd-journald[422]: Journal started
nov. 20 08:12:42 pseudo-N150ZU systemd-journald[422]: Runtime journal (/run/log/journal/59ff5039d0b34c65ae5ba293180a3875) is 8.0M, max 158.7M, 150.7M free.
nov. 20 08:12:42 pseudo-N150ZU systemd-modules-load[420]: Inserted module 'lp'
nov. 20 08:12:42 pseudo-N150ZU systemd-modules-load[420]: Inserted module 'ppdev'
nov. 20 08:12:42 pseudo-N150ZU systemd-modules-load[420]: Inserted module 'parport_pc'
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Starting Flush Journal to Persistent Storage...
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started udev Kernel Device Manager.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started udev Coldplug all Devices.
nov. 20 08:12:42 pseudo-N150ZU systemd-journald[422]: Time spent on flushing to /var is 69.978ms for 760 entries.
nov. 20 08:12:42 pseudo-N150ZU systemd-journald[422]: System journal (/var/log/journal/59ff5039d0b34c65ae5ba293180a3875) is 272.0M, max 3.7G, 3.4G free.
nov. 20 08:12:42 pseudo-N150ZU kernel: Adding 1852220k swap on /swapfile.  Priority:-2 extents:5 across:1884988k SSFS
nov. 20 08:12:42 pseudo-N150ZU kernel: input: Intel HID events as /devices/platform/INT33D5:00/input/input14
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started Set the console keyboard layout.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Reached target Local File Systems (Pre).
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Starting Show Plymouth Boot Screen...
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Activated swap /swapfile.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Reached target Swap.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started Show Plymouth Boot Screen.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Reached target Local Encrypted Volumes.
nov. 20 08:12:42 pseudo-N150ZU mtp-probe[475]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7"
nov. 20 08:12:42 pseudo-N150ZU mtp-probe[475]: bus: 1, device: 3 was not an MTP device
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started Flush Journal to Persistent Storage.
nov. 20 08:12:42 pseudo-N150ZU mtp-probe[476]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6"
nov. 20 08:12:42 pseudo-N150ZU mtp-probe[476]: bus: 1, device: 2 was not an MTP device
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Created slice system-systemd\x2dbacklight.slice.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
nov. 20 08:12:42 pseudo-N150ZU systemd-udevd[451]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
nov. 20 08:12:42 pseudo-N150ZU systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
nov. 20 08:12:42 pseudo-N150ZU kernel: media: Linux media interface: v0.10
nov. 20 08:12:42 pseudo-N150ZU kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
nov. 20 08:12:42 pseudo-N150ZU kernel: videodev: Linux video capture interface: v2.00
nov. 20 08:12:42 pseudo-N150ZU kernel: intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
nov. 20 08:12:42 pseudo-N150ZU kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: Core ver 2.22
nov. 20 08:12:42 pseudo-N150ZU kernel: NET: Registered protocol family 31
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: HCI device and connection manager initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: HCI socket layer initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: L2CAP socket layer initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: SCO socket layer initialized
nov. 20 08:12:42 pseudo-N150ZU kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
nov. 20 08:12:42 pseudo-N150ZU kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
nov. 20 08:12:42 pseudo-N150ZU kernel: usbcore: registered new interface driver btusb
nov. 20 08:12:42 pseudo-N150ZU kernel: i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vdd not found, using dummy regulator
nov. 20 08:12:42 pseudo-N150ZU kernel: i2c_hid i2c-MSFT0001:01: Linked as a consumer to regulator.0
nov. 20 08:12:42 pseudo-N150ZU kernel: i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vddl not found, using dummy regulator
nov. 20 08:12:42 pseudo-N150ZU kernel: uvcvideo: Found UVC 1.00 device BisonCam,NB Pro (5986:9102)
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Device revision is 2
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Secure boot is enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: OTP lock is enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: API lock is enabled
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Debug lock is disabled
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
nov. 20 08:12:42 pseudo-N150ZU kernel: Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
nov. 20 08:12:42 pseudo-N150ZU kernel: Intel(R) Wireless WiFi driver for Linux
nov. 20 08:12:42 pseudo-N150ZU kernel: Copyright(c) 2003- 2015 Intel Corporation
nov. 20 08:12:42 pseudo-N150ZU kernel: uvcvideo 1-7:1.0: Entity type for entity Extension 3 was not initialized!
nov. 20 08:12:42 pseudo-N150ZU kernel: uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
nov. 20 08:12:42 pseudo-N150ZU kernel: uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
nov. 20 08:12:42 pseudo-N150ZU kernel: input: BisonCam,NB Pro: BisonCam,NB Pr as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input15
nov. 20 08:12:42 pseudo-N150ZU kernel: usbcore: registered new interface driver uvcvideo
nov. 20 08:12:42 pseudo-N150ZU kernel: USB Video Class driver (1.1.1)
nov. 20 08:12:42 pseudo-N150ZU kernel: iwlwifi 0000:03:00.0: loaded firmware version 43.95eb4e97.0 op_mode iwlmvm
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
nov. 20 08:12:42 pseudo-N150ZU kernel: RAPL PMU: hw unit of domain psys 2^-14 Joules
nov. 20 08:12:42 pseudo-N150ZU kernel: cryptd: max_cpu_qlen set to 1000
nov. 20 08:12:43 pseudo-N150ZU kernel: iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324
nov. 20 08:12:43 pseudo-N150ZU kernel: AVX2 version of gcm_enc/dec engaged.
nov. 20 08:12:43 pseudo-N150ZU kernel: AES CTR mode by8 optimization enabled
nov. 20 08:12:43 pseudo-N150ZU systemd-udevd[461]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Load/Save RF Kill Switch Status...
nov. 20 08:12:43 pseudo-N150ZU kernel: iwlwifi 0000:03:00.0: base HW address: 08:71:90:82:04:d3
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Found device ADATA SX6000PNP 6.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting File System Check on /dev/disk/by-uuid/adf882a7-7460-47d0-b3a3-c84fa891c4ec...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started File System Check Daemon to report status.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Found device ADATA SX6000PNP SYSTEM.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting File System Check on /dev/disk/by-uuid/B4A3-82BD...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Load/Save RF Kill Switch Status.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Show Plymouth Boot Screen...
nov. 20 08:12:43 pseudo-N150ZU systemd-fsck[630]: /dev/nvme0n1p6: clean, 427662/52502528 files, 59731107/209983744 blocks
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Show Plymouth Boot Screen.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started File System Check on /dev/disk/by-uuid/adf882a7-7460-47d0-b3a3-c84fa891c4ec.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Mounting /media/data...
nov. 20 08:12:43 pseudo-N150ZU kernel: EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: discard
nov. 20 08:12:43 pseudo-N150ZU kernel: input: MSFT0001:01 06CB:CD64 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-MSFT0001:01/0018:06CB:CD64.0001/input/input16
nov. 20 08:12:43 pseudo-N150ZU kernel: input: MSFT0001:01 06CB:CD64 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-MSFT0001:01/0018:06CB:CD64.0001/input/input17
nov. 20 08:12:43 pseudo-N150ZU kernel: hid-generic 0018:06CB:CD64.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CD64] on i2c-MSFT0001:01
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Mounted /media/data.
nov. 20 08:12:43 pseudo-N150ZU systemd-udevd[457]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
nov. 20 08:12:43 pseudo-N150ZU kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
nov. 20 08:12:43 pseudo-N150ZU kernel: thermal thermal_zone2: failed to read out thermal zone (-61)
nov. 20 08:12:43 pseudo-N150ZU kernel: iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x18
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x1a
nov. 20 08:12:43 pseudo-N150ZU kernel: snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
nov. 20 08:12:43 pseudo-N150ZU systemd-fsck[673]: fsck.fat 4.1 (2017-01-24)
nov. 20 08:12:43 pseudo-N150ZU systemd-fsck[673]: /dev/nvme0n1p1: 192 files, 7977/65536 clusters
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started File System Check on /dev/disk/by-uuid/B4A3-82BD.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Mounting /boot/efi...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Mounted /boot/efi.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Local File Systems.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting AppArmor initialization...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Set console font and keymap...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Create Volatile Files and Directories...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Set console font and keymap.
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Sound Card.
nov. 20 08:12:43 pseudo-N150ZU kernel: intel_rapl: Found RAPL domain package
nov. 20 08:12:43 pseudo-N150ZU kernel: intel_rapl: Found RAPL domain core
nov. 20 08:12:43 pseudo-N150ZU kernel: intel_rapl: Found RAPL domain uncore
nov. 20 08:12:43 pseudo-N150ZU kernel: intel_rapl: Found RAPL domain dram
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Create Volatile Files and Directories.
nov. 20 08:12:43 pseudo-N150ZU apparmor[700]:  * Starting AppArmor profiles
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Network Name Resolution...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Update UTMP about System Boot/Shutdown...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Network Time Synchronization...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Update UTMP about System Boot/Shutdown.
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
nov. 20 08:12:43 pseudo-N150ZU kernel: input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
nov. 20 08:12:43 pseudo-N150ZU apparmor[700]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
nov. 20 08:12:43 pseudo-N150ZU kernel: input: MSFT0001:01 06CB:CD64 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-MSFT0001:01/0018:06CB:CD64.0001/input/input27
nov. 20 08:12:43 pseudo-N150ZU kernel: hid-multitouch 0018:06CB:CD64.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CD64] on i2c-MSFT0001:01
nov. 20 08:12:43 pseudo-N150ZU audit[767]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=767 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[766]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=766 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[765]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[765]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[765]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[769]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=769 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[763]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[763]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[763]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[763]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[774]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=774 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[774]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=774 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[771]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=771 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU apparmor[700]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=767 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=766 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=765 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=769 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU kernel: audit: type=1400 audit(1574233963.276:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=763 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[773]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=773 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[770]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=770 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[770]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=770 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[772]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=772 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[772]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=772 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[772]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=772 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[768]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=768 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[768]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=768 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU audit[776]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=776 comm="apparmor_parser"
nov. 20 08:12:43 pseudo-N150ZU apparmor[700]:    ...done.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started AppArmor initialization.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Network Time Synchronization.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target System Initialization.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started CUPS Scheduler.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on D-Bus System Message Bus Socket.
nov. 20 08:12:43 pseudo-N150ZU systemd-resolved[713]: Positive Trust Anchors:
nov. 20 08:12:43 pseudo-N150ZU systemd-resolved[713]: . IN DS 19036 8 2 49aac11d7b6f6446702e54a1607371607a1a41855200fd2ce1cdde32f24e8fb5
nov. 20 08:12:43 pseudo-N150ZU systemd-resolved[713]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
nov. 20 08:12:43 pseudo-N150ZU systemd-resolved[713]: Negative trust anchors: 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa corp home internal intranet lan local private test
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Socket activation for snappy daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Daily Cleanup of Temporary Directories.
nov. 20 08:12:43 pseudo-N150ZU systemd-resolved[713]: Using system hostname 'pseudo-N150ZU'.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on mpd.socket.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on ACPID Listen Socket.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on CUPS Scheduler.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on UUID daemon activation socket.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started ACPI Events Check.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Paths.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target System Time Synchronized.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Trigger anacron every hour.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Discard unused blocks once a week.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Daily apt download activities.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Message of the Day.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Daily apt upgrade and clean activities.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Timers.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Network Name Resolution.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Listening on Socket activation for snappy daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Sockets.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Basic System.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting System Logging Service...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started CUPS Scheduler.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Thermal Daemon Service...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started ACPI event daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting LSB: automatic crash report generation...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Save/Restore Sound Card State...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Set the CPU Frequency Scaling governor.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started irqbalance daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Disk Manager...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down...
nov. 20 08:12:43 pseudo-N150ZU rsyslogd[780]: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd.  [v8.32.0]
nov. 20 08:12:43 pseudo-N150ZU rsyslogd[780]: rsyslogd's groupid changed to 106
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Modem Manager...
nov. 20 08:12:43 pseudo-N150ZU rsyslogd[780]: rsyslogd's userid changed to 102
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Dispatcher daemon for systemd-networkd...
nov. 20 08:12:43 pseudo-N150ZU rsyslogd[780]:  [origin software="rsyslogd" swVersion="8.32.0" x-pid="780" x-info="http://www.rsyslog.com"] start
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Regular background program processing daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
nov. 20 08:12:43 pseudo-N150ZU cron[800]: (CRON) INFO (pidfile fd = 3)
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Detect the available GPUs and deal with any system changes...
nov. 20 08:12:43 pseudo-N150ZU cron[800]: (CRON) INFO (Running @reboot jobs)
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started D-Bus System Message Bus.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Found user 'avahi' (UID 115) and group 'avahi' (GID 122).
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Successfully dropped root privileges.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: avahi-daemon 0.7 starting up.
nov. 20 08:12:43 pseudo-N150ZU udisksd[791]: udisks daemon version 2.7.6 starting
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: dbus[804]: Unknown group "power" in message bus configuration file
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] AppArmor D-Bus mediation is enabled
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting WPA supplicant...
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Successfully called chroot().
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Successfully dropped remaining capabilities.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: No service file found in /etc/avahi/services.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: New relevant interface lo.IPv6 for mDNS.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Network Manager...
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: New relevant interface lo.IPv4 for mDNS.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Network interface enumeration completed.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Registering new address record for ::1 on lo.*.
nov. 20 08:12:43 pseudo-N150ZU avahi-daemon[802]: Registering new address record for 127.0.0.1 on lo.IPv4.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Run anacron jobs.
nov. 20 08:12:43 pseudo-N150ZU thermald[782]: 22 CPUID levels; family:model:stepping 0x6:8e:b (6:142:11)
nov. 20 08:12:43 pseudo-N150ZU thermald[782]: Polling mode is enabled: 4
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting LSB: Record successful boot for GRUB...
nov. 20 08:12:43 pseudo-N150ZU ModemManager[795]: <info>  ModemManager (version 1.10.0) starting in system bus...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Accounts Service...
nov. 20 08:12:43 pseudo-N150ZU anacron[812]: Anacron 2.3 started on 2019-11-20
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Bluetooth service...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Login Prompts.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Login Service...
nov. 20 08:12:43 pseudo-N150ZU thermald[782]: sysfs read failed constraint_0_max_power_uw
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Snappy daemon...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Host and Network Name Lookups.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started System Logging Service.
nov. 20 08:12:43 pseudo-N150ZU anacron[812]: Will run job `cron.daily' in 5 min.
nov. 20 08:12:43 pseudo-N150ZU anacron[812]: Jobs will be executed sequentially
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down.
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.5' (uid=0 pid=795 comm="/usr/sbin/ModemManager --filter-policy=strict " label="unconfined")
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Save/Restore Sound Card State.
nov. 20 08:12:43 pseudo-N150ZU bluetoothd[820]: Bluetooth daemon 5.48
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Avahi mDNS/DNS-SD Stack.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Thermal Daemon Service.
nov. 20 08:12:43 pseudo-N150ZU udisksd[791]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Bluetooth service.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Bluetooth.
nov. 20 08:12:43 pseudo-N150ZU grub-common[816]:  * Recording successful boot for GRUB
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Authorization Manager...
nov. 20 08:12:43 pseudo-N150ZU bluetoothd[820]: Starting SDP server
nov. 20 08:12:43 pseudo-N150ZU apport[784]:  * Starting automatic crash report generation: apport
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Make remote CUPS printers available locally.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started WPA supplicant.
nov. 20 08:12:43 pseudo-N150ZU wpa_supplicant[809]: Successfully initialized wpa_supplicant
nov. 20 08:12:43 pseudo-N150ZU udisksd[791]: Failed to load the 'mdraid' libblockdev plugin
nov. 20 08:12:43 pseudo-N150ZU kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
nov. 20 08:12:43 pseudo-N150ZU kernel: Bluetooth: BNEP filters: protocol multicast
nov. 20 08:12:43 pseudo-N150ZU kernel: Bluetooth: BNEP socket layer initialized
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.8' (uid=0 pid=820 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
nov. 20 08:12:43 pseudo-N150ZU bluetoothd[820]: Bluetooth management interface 1.14 initialized
nov. 20 08:12:43 pseudo-N150ZU apport[784]:    ...done.
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: New seat seat0.
nov. 20 08:12:43 pseudo-N150ZU grub-common[816]:    ...done.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Hostname Service...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started LSB: automatic crash report generation.
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event3 (Power Button)
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started LSB: Record successful boot for GRUB.
nov. 20 08:12:43 pseudo-N150ZU polkitd[835]: started daemon version 0.105 using authority implementation `local' version `0.105'
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
nov. 20 08:12:43 pseudo-N150ZU accounts-daemon[817]: started daemon version 0.6.45
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Authorization Manager.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Accounts Service.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Modem Manager.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3823] NetworkManager (version 1.10.6) is starting... (for the first time)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3824] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 10-dns-resolved.conf, no-mac-addr-change.conf) (run: 10-globally-managed-devices.conf) (etc: default-wifi-powersave-on.conf)
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event0 (Power Button)
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event2 (Lid Switch)
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event1 (Sleep Button)
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.hostname1'
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Hostname Service.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3890] manager[0x5632f88c3050]: monitoring kernel firmware directory '/lib/firmware'.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3891] monitoring ifupdown state file '/run/network/ifstate'.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3917] hostname: hostname: using hostnamed
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3918] hostname: hostname changed from (none) to "pseudo-N150ZU"
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3920] dns-mgr[0x5632f88b71a0]: init: dns=systemd-resolved, rc-manager=symlink, plugin=systemd-resolved
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3928] rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1d.1/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3929] manager[0x5632f88c3050]: rfkill: WiFi hardware radio set enabled
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.3929] manager[0x5632f88c3050]: rfkill: WWAN hardware radio set enabled
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Network Manager.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Reached target Network.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Music Player Daemon...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting OpenBSD Secure Shell server...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Permit User Sessions...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Network Manager Wait Online...
nov. 20 08:12:43 pseudo-N150ZU gpu-manager[803]: Error: can't open /lib/modules/5.0.0-36-generic/updates/dkms
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.13' (uid=0 pid=811 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Detect the available GPUs and deal with any system changes.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Permit User Sessions.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Terminate Plymouth Boot Screen...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Set console scheme...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Network Manager Script Dispatcher Service...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Set console scheme.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Created slice system-getty.slice.
nov. 20 08:12:43 pseudo-N150ZU snapd[824]: AppArmor status: apparmor is enabled and all features are available
nov. 20 08:12:43 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Network Manager Script Dispatcher Service.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4143] init!
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4145]       interface-parser: parsing file /etc/network/interfaces
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4145]       interface-parser: finished parsing file /etc/network/interfaces
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4145] management mode: unmanaged
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4151] devices added (path: /sys/devices/pci0000:00/0000:00:1d.0/0000:02:00.1/net/enp2s0f1, iface: enp2s0f1)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4151] device added (path: /sys/devices/pci0000:00/0000:00:1d.0/0000:02:00.1/net/enp2s0f1, iface: enp2s0f1): no ifupdown configuration found.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4151] devices added (path: /sys/devices/pci0000:00/0000:00:1d.1/0000:03:00.0/net/wlp3s0, iface: wlp3s0)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4151] device added (path: /sys/devices/pci0000:00/0000:00:1d.1/0000:03:00.0/net/wlp3s0, iface: wlp3s0): no ifupdown configuration found.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4152] devices added (path: /sys/devices/virtual/net/lo, iface: lo)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4152] device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4152] end _init.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4152] settings: loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ifupdown.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4152] settings: loaded plugin keyfile: (c) 2007 - 2016 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4153] (-124780352) ... get_connections.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4153] (-124780352) ... get_connections (managed=false): return empty list.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Received SIGRTMIN+21 from PID 345 (plymouthd).
nov. 20 08:12:43 pseudo-N150ZU sshd[900]: Server listening on 0.0.0.0 port 22.
nov. 20 08:12:43 pseudo-N150ZU sshd[900]: Server listening on :: port 22.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started OpenBSD Secure Shell server.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4260] keyfile: new connection /etc/NetworkManager/system-connections/LOG-2.4 (4de3ee08-4309-4fbe-856d-8b7f6665f3ac,"LOG-2.4")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4359] keyfile: new connection /etc/NetworkManager/system-connections/Freebox-74841C (dbc28080-b5fc-4018-a4d4-8e24fda2f3d0,"Freebox-74841C")
nov. 20 08:12:43 pseudo-N150ZU networkd-dispatcher[798]: WARNING: systemd-networkd is not running, output will be incomplete.
nov. 20 08:12:43 pseudo-N150ZU snapd[824]: daemon.go:338: started snapd/2.40+18.04 (series 16; classic) ubuntu/18.04 (amd64) linux/5.0.0-36-generic.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Dispatcher daemon for systemd-networkd.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Disk Manager.
nov. 20 08:12:43 pseudo-N150ZU udisksd[791]: Acquired the name org.freedesktop.UDisks2 on the system message bus
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4450] keyfile: new connection /etc/NetworkManager/system-connections/LOG-5.0 (423d8159-9319-43d4-9c37-3e8cd7c63f87,"LOG-5.0")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4521] keyfile: new connection /etc/NetworkManager/system-connections/LogreIOT (04a87a84-1938-4b49-b9b0-479bafee1ebe,"LogreIOT")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4596] keyfile: new connection /etc/NetworkManager/system-connections/quickyAP-4bcd013e-ee78-406f-ab27-8b707d783fc7 (4bcd013e-ee78-406f-ab27-8b707d783fc7,"quickyAP")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4661] keyfile: new connection /etc/NetworkManager/system-connections/freebox_JT-d72820d9-8361-4c42-b426-f1efe5ca20ea (d72820d9-8361-4c42-b426-f1efe5ca20ea,"freebox_JT")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4757] keyfile: new connection /etc/NetworkManager/system-connections/freebox_JT (ecace584-50f4-415c-9f65-c8593c40cc1c,"freebox_JT")
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Terminate Plymouth Boot Screen.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4851] keyfile: new connection /etc/NetworkManager/system-connections/quickyAP (7af8fbf8-1020-4e1e-911d-c3529c55c8aa,"quickyAP")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4872] get unmanaged devices count: 0
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4873] manager: rfkill: WiFi enabled by radio killswitch; enabled by state file
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4873] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4873] manager: Networking is enabled by state file
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4874] dhcp-init: Using DHCP client 'dhclient'
nov. 20 08:12:43 pseudo-N150ZU nm-dispatcher[887]: req:1 'hostname': new request (1 scripts)
nov. 20 08:12:43 pseudo-N150ZU nm-dispatcher[887]: req:1 'hostname': start running ordered scripts...
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4877] Loaded device plugin: NMBondDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4877] Loaded device plugin: NMBridgeDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4877] Loaded device plugin: NMDummyDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMEthernetDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMInfinibandDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMIPTunnelDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMMacsecDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMMacvlanDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMPppDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMTunDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMVethDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMVlanDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4878] Loaded device plugin: NMVxlanDeviceFactory (internal)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4884] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wwan.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4898] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4902] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-adsl.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4915] Loaded device plugin: NMTeamFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-team.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4919] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wifi.so)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4930] device (lo): carrier: link connected
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4934] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4942] manager: (enp2s0f1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4950] keyfile: add connection in-memory (1d9d4fe2-b427-34f4-b11a-3bb58bfb1760,"Wired connection 1")
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4954] settings: (enp2s0f1): created default wired connection 'Wired connection 1'
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.4960] device (enp2s0f1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
nov. 20 08:12:43 pseudo-N150ZU kernel: Generic PHY r8169-201:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-201:00, irq=IGNORE)
nov. 20 08:12:43 pseudo-N150ZU acpid[783]: starting up with netlink and the input layer
nov. 20 08:12:43 pseudo-N150ZU acpid[783]: 8 rules loaded
nov. 20 08:12:43 pseudo-N150ZU acpid[783]: waiting for events: event logging is off
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Snappy daemon.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Wait until snapd is fully seeded...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Wait until snapd is fully seeded.
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event7 (Intel HID events)
nov. 20 08:12:43 pseudo-N150ZU systemd-logind[822]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Login Service.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Unattended Upgrades Shutdown.
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Starting Simple Desktop Display Manager...
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Simple Desktop Display Manager.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.6081] wifi-nl80211: (wlp3s0): using nl80211 for WiFi device control
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.6083] device (wlp3s0): driver supports Access Point (AP) mode
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.6088] manager: (wlp3s0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/3)
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.6094] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
nov. 20 08:12:43 pseudo-N150ZU kernel: r8169 0000:02:00.1 enp2s0f1: Link is Down
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Initializing...
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Logind interface found
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Starting...
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Adding new display on vt 1 ...
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Loading theme configuration from ""
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Display server starting...
nov. 20 08:12:43 pseudo-N150ZU sddm[950]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{14e94b45-b605-4788-a4e1-0e9142a2b6bf} -background none -noreset -displayfd 18 -seat seat0 vt1
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <warn>  [1574233963.8126] Error: failed to open /run/network/ifstate
nov. 20 08:12:43 pseudo-N150ZU systemd[1]: Started Music Player Daemon.
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8162] bluez: use BlueZ version 5
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8163] modem-manager: ModemManager available
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8249] supplicant: wpa_supplicant running
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8250] device (wlp3s0): supplicant interface state: init -> starting
nov. 20 08:12:43 pseudo-N150ZU wpa_supplicant[809]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
nov. 20 08:12:43 pseudo-N150ZU wpa_supplicant[809]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
nov. 20 08:12:43 pseudo-N150ZU wpa_supplicant[809]: dbus: Failed to construct signal
nov. 20 08:12:43 pseudo-N150ZU wpa_supplicant[809]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8847] device (wlp3s0): supplicant interface state: starting -> ready
nov. 20 08:12:43 pseudo-N150ZU NetworkManager[811]: <info>  [1574233963.8848] device (wlp3s0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Setting default cursor
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Display server started.
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Socket server starting...
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Socket server started.
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Loading theme configuration from "/usr/share/sddm/themes/breeze/theme.conf"
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Greeter starting...
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Adding cookie to "/var/run/sddm/{14e94b45-b605-4788-a4e1-0e9142a2b6bf}"
nov. 20 08:12:44 pseudo-N150ZU sddm-helper[967]: [PAM] Starting...
nov. 20 08:12:44 pseudo-N150ZU sddm-helper[967]: [PAM] Authenticating...
nov. 20 08:12:44 pseudo-N150ZU sddm-helper[967]: [PAM] returning.
nov. 20 08:12:44 pseudo-N150ZU sddm-helper[967]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Created slice User Slice of sddm.
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Starting User Manager for UID 119...
nov. 20 08:12:44 pseudo-N150ZU systemd-logind[822]: New session 1 of user sddm.
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Started Session 1 of user sddm.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: pam_unix(systemd-user:session): session opened for user sddm by (uid=0)
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Listening on GnuPG network certificate management daemon.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Reached target Timers.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Listening on GnuPG cryptographic agent and passphrase cache.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Reached target Paths.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Reached target Sockets.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Reached target Basic System.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Reached target Default.
nov. 20 08:12:44 pseudo-N150ZU systemd[970]: Startup finished in 22ms.
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Started User Manager for UID 119.
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Greeter session started successfully
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: High-DPI autoscaling not Enabled
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Loading theme configuration from "/usr/share/sddm/themes/breeze/theme.conf"
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Reading from "/usr/share/xsessions/plasma.desktop"
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: inotify_add_watch("/usr/share/wayland-sessions") failed: "No such file or directory"
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Connected to the daemon.
nov. 20 08:12:44 pseudo-N150ZU sddm[950]: Message received from greeter: Connect
nov. 20 08:12:44 pseudo-N150ZU avahi-daemon[802]: Server startup complete. Host name is pseudo-N150ZU.local. Local service cookie is 1376843506.
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Loading file:///usr/share/sddm/themes/breeze/Main.qml...
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject::installEventFilter(): Cannot filter events for objects in a different thread.
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU dbus-daemon[990]: [session uid=119 pid=988] AppArmor D-Bus mediation is enabled
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject: Cannot create children for a parent that is in a different thread.
                                                   (Parent is SDDM::GreeterApp(0x7fffd604de40), parent's thread is QThread(0x56257c999900), current thread is QThread(0x56257cd13b80)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: QObject::installEventFilter(): Cannot filter events for objects in a different thread.
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Waiting for firmware download to complete
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Firmware loaded in 1495425 usecs
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Waiting for device to boot
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Cannot watch QRC-like path ":/icons/hicolor/index.theme"
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Device booted in 12705 usecs
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
nov. 20 08:12:44 pseudo-N150ZU kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
nov. 20 08:12:44 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.33' (uid=119 pid=981 comm="/usr/bin/sddm-greeter --socket /tmp/sddm-:0-lNTcPg" label="unconfined")
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Starting Daemon for power management...
nov. 20 08:12:44 pseudo-N150ZU NetworkManager[811]: <info>  [1574233964.5534] bluez5: NAP: added interface 08:71:90:82:04:D7
nov. 20 08:12:44 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.UPower'
nov. 20 08:12:44 pseudo-N150ZU systemd[1]: Started Daemon for power management.
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Adding view for "eDP-1" QRect(0,0 1920x1080)
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Message received from daemon: Capabilities
nov. 20 08:12:44 pseudo-N150ZU sddm-greeter[981]: Message received from daemon: HostName
nov. 20 08:12:45 pseudo-N150ZU ModemManager[795]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1d.0/0000:02:00.1': not supported by any plugin
nov. 20 08:12:45 pseudo-N150ZU ModemManager[795]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1d.1/0000:03:00.0': not supported by any plugin
nov. 20 08:12:48 pseudo-N150ZU set-cpufreq[786]: Setting powersave scheduler for all CPUs
nov. 20 08:12:49 pseudo-N150ZU NetworkManager[811]: <info>  [1574233969.6089] manager: startup complete
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Started Network Manager Wait Online.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Reached target Network is Online.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Starting Daily apt download activities...
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Starting Tool to automatically collect and submit kernel crash signatures...
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Started crash report submission daemon.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: kerneloops.service: Found left-over process 1023 (kerneloops) in control group while starting unit. Ignoring.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: This usually indicates unclean termination of a previous run, or service implementation deficiencies.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Started Tool to automatically collect and submit kernel crash signatures.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Reached target Multi-User System.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Reached target Graphical Interface.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Starting Update UTMP about System Runlevel Changes...
nov. 20 08:12:49 pseudo-N150ZU whoopsie[1022]: [08:12:49] Using lock path: /var/lock/whoopsie/lock
nov. 20 08:12:49 pseudo-N150ZU systemd[1]: Started Update UTMP about System Runlevel Changes.
nov. 20 08:12:49 pseudo-N150ZU whoopsie[1022]: [08:12:49] offline
nov. 20 08:12:53 pseudo-N150ZU sddm-greeter[981]: Reading from "/usr/share/xsessions/plasma.desktop"
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Message received from greeter: Login
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Reading from "/usr/share/xsessions/plasma.desktop"
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Reading from "/usr/share/xsessions/plasma.desktop"
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Session "plasma.desktop" selected, command: "/usr/bin/startkde"
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: [PAM] Starting...
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: [PAM] Authenticating...
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: [PAM] Preparing to converse...
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: [PAM] Conversation with 1 messages
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet(sddm:auth): (null): pam_sm_authenticate
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet5(sddm:auth): (null): pam_sm_authenticate
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: [PAM] returning.
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Authenticated successfully
nov. 20 08:12:53 pseudo-N150ZU sddm-greeter[981]: Message received from daemon: LoginSucceeded
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet(sddm:setcred): pam_kwallet: pam_sm_setcred
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet5(sddm:setcred): pam_kwallet5: pam_sm_setcred
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_unix(sddm:session): session opened for user pseudo by (uid=0)
nov. 20 08:12:53 pseudo-N150ZU systemd[1]: Created slice User Slice of pseudo.
nov. 20 08:12:53 pseudo-N150ZU systemd[1]: Starting User Manager for UID 1000...
nov. 20 08:12:53 pseudo-N150ZU systemd-logind[822]: New session 3 of user pseudo.
nov. 20 08:12:53 pseudo-N150ZU systemd[1]: Started Session 3 of user pseudo.
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: pam_unix(systemd-user:session): session opened for user pseudo by (uid=0)
nov. 20 08:12:53 pseudo-N150ZU sddm-greeter[981]: qrc:///QtQuick/VirtualKeyboard/content/components/SelectionControl.qml:80: TypeError: Cannot read property 'cursorRectIntersectsClipRect' of null
nov. 20 08:12:53 pseudo-N150ZU sddm-greeter[981]: qrc:///QtQuick/VirtualKeyboard/content/components/SelectionControl.qml:48: TypeError: Cannot read property 'anchorRectIntersectsClipRect' of null
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Reached target Paths.
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet(sddm:session): pam_kwallet: pam_sm_open_session
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Listening on GnuPG network certificate management daemon.
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1048]: pam_kwallet(sddm:session): pam_kwallet: final socket path: /run/user/1000/kwallet.socket
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: pam_kwallet5(sddm:session): pam_kwallet5: pam_sm_open_session
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Listening on GnuPG cryptographic agent and passphrase cache.
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1050]: pam_kwallet5(sddm:session): pam_kwallet5: final socket path: /run/user/1000/kwallet5.socket
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Reached target Sockets.
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Reached target Timers.
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Reached target Basic System.
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Reached target Default.
nov. 20 08:12:53 pseudo-N150ZU systemd[1037]: Startup finished in 15ms.
nov. 20 08:12:53 pseudo-N150ZU systemd[1]: Started User Manager for UID 1000.
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1036]: Starting: "/etc/sddm/Xsession \"/usr/bin/startkde\""
nov. 20 08:12:53 pseudo-N150ZU sddm-helper[1052]: Adding cookie to "/home/pseudo/.Xauthority"
nov. 20 08:12:53 pseudo-N150ZU sddm[950]: Session started
nov. 20 08:12:54 pseudo-N150ZU sddm-helper[967]: [PAM] Closing session
nov. 20 08:12:54 pseudo-N150ZU sddm-helper[967]: pam_unix(sddm-greeter:session): session closed for user sddm
nov. 20 08:12:54 pseudo-N150ZU sddm-helper[967]: [PAM] Ended.
nov. 20 08:12:54 pseudo-N150ZU sddm[950]: Auth: sddm-helper exited successfully
nov. 20 08:12:54 pseudo-N150ZU sddm[950]: Greeter stopped.
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] AppArmor D-Bus mediation is enabled
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.freedesktop.systemd1' requested by ':1.0' (uid=1000 pid=1125 comm="dbus-update-activation-environment --verbose --sys" label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activated service 'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1 exited with status 1
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.freedesktop.systemd1' requested by ':1.1' (uid=1000 pid=1129 comm="dbus-update-activation-environment --verbose --sys" label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activated service 'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1 exited with status 1
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.freedesktop.systemd1' requested by ':1.3' (uid=1000 pid=1163 comm="dbus-update-activation-environment --systemd --all" label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activated service 'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1 exited with status 1
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kde.ActivityManager' requested by ':1.5' (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kde.ActivityManager'
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Config timer connecting...
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Setting the name of  0x55a63b5ea570  to  "org.kde.ActivityManager.ActivityTemplates"
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Setting the name of  0x55a63b5fc1a0  to  "org.kde.ActivityManager.RunApplication"
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Setting the name of  0x55a63b5f7510  to  "org.kde.ActivityManager.Resources.Scoring"
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Creating directory:  "/home/pseudo/.local/share/kactivitymanagerd/resources/"
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kde.kglobalaccel' requested by ':1.9' (uid=1000 pid=1185 comm="/usr/bin/kaccess " label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: KActivities: Database connection:  "kactivities_db_resources_140569391541376_readwrite"
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]:     query_only:          QVariant(qlonglong, 0)
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]:     journal_mode:        QVariant(QString, "wal")
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]:     wal_autocheckpoint:  QVariant(qlonglong, 100)
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]:     synchronous:         QVariant(qlonglong, 1)
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Service started, version: 7.0.0
nov. 20 08:12:54 pseudo-N150ZU org.kde.ActivityManager[1118]: Cleaning up...
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='ca.desrt.dconf' requested by ':1.13' (uid=1000 pid=1205 comm="/usr/bin/gsettings set org.gnome.desktop.a11y.appl" label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'ca.desrt.dconf'
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kde.kglobalaccel'
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kde.KScreen' requested by ':1.5' (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.52' (uid=1000 pid=1262 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined")
nov. 20 08:12:54 pseudo-N150ZU systemd[1]: Starting RealtimeKit Scheduling Policy Service...
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
nov. 20 08:12:54 pseudo-N150ZU systemd[1]: Started RealtimeKit Scheduling Policy Service.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Successfully called chroot.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Successfully dropped privileges.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Successfully limited resources.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Running.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Canary thread running.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Successfully made thread 1262 of process 1262 (n/a) owned by '1000' high priority at nice level -11.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Supervising 1 threads of 1 processes of 1 users.
nov. 20 08:12:54 pseudo-N150ZU rtkit-daemon[1264]: Watchdog thread running.
nov. 20 08:12:54 pseudo-N150ZU polkitd(authority=local)[835]: Registered Authentication Agent for unix-session:3 (system bus name :1.54 [/usr/lib/x86_64-linux-gnu/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
nov. 20 08:12:54 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kde.KScreen'
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: Connected output 66 to CRTC 63
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xcb.helper: Detected XRandR 1.6
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xcb.helper: Event Base:  89
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xcb.helper: Event Error:  147
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: XRandR::setConfig
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: Requested screen size is QSize(1920, 1080)
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: Needed CRTCs:  1
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: Actions to perform:
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr:         Primary Output: false
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr:         Change Screen Size: false
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr:         Disable outputs: false
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr:         Change outputs: false
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr:         Enable outputs: false
nov. 20 08:12:55 pseudo-N150ZU org.kde.KScreen[1118]: kscreen.xrandr: XRandR::setConfig done!
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.a11y.Bus' requested by ':1.16' (uid=1000 pid=1049 comm="/usr/bin/kwalletd --pam-login 15 3 --nofork " label="unconfined")
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.a11y.Bus'
nov. 20 08:12:55 pseudo-N150ZU org.a11y.Bus[1118]: dbus-daemon[1290]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1049 comm="/usr/bin/kwalletd --pam-login 15 3 --nofork " label="unconfined")
nov. 20 08:12:55 pseudo-N150ZU org.a11y.Bus[1118]: dbus-daemon[1290]: Successfully activated service 'org.a11y.atspi.Registry'
nov. 20 08:12:55 pseudo-N150ZU org.a11y.Bus[1118]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
nov. 20 08:12:55 pseudo-N150ZU spice-vdagent[1316]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[804]: [system] Activating service name='org.kde.powerdevil.discretegpuhelper' requested by ':1.57' (uid=1000 pid=1273 comm="/usr/lib/x86_64-linux-gnu/libexec/org_kde_powerdev" label="unconfined") (using servicehelper)
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.discretegpuhelper[1342]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.discretegpuhelper[1342]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.discretegpuhelper[1342]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.kde.powerdevil.discretegpuhelper'
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[804]: [system] Activating service name='org.kde.powerdevil.backlighthelper' requested by ':1.57' (uid=1000 pid=1273 comm="/usr/lib/x86_64-linux-gnu/libexec/org_kde_powerdev" label="unconfined") (using servicehelper)
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Supervising 1 threads of 1 processes of 1 users.
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Successfully made thread 1349 of process 1262 (n/a) owned by '1000' RT at priority 5.
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Supervising 2 threads of 1 processes of 1 users.
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Supervising 2 threads of 1 processes of 1 users.
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Successfully made thread 1363 of process 1262 (n/a) owned by '1000' RT at priority 5.
nov. 20 08:12:55 pseudo-N150ZU rtkit-daemon[1264]: Supervising 3 threads of 1 processes of 1 users.
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.backlighthelper[1350]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.backlighthelper[1350]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU org.kde.powerdevil.backlighthelper[1350]: QDBusArgument: read from a write-only object
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.gnome.GConf' requested by ':1.33' (uid=1000 pid=1366 comm="/usr/lib/x86_64-linux-gnu/pulse/gconf-helper " label="unconfined")
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.gnome.GConf'
nov. 20 08:12:55 pseudo-N150ZU bluetoothd[820]: Endpoint registered: sender=:1.67 path=/MediaEndpoint/A2DPSource
nov. 20 08:12:55 pseudo-N150ZU bluetoothd[820]: Endpoint registered: sender=:1.67 path=/MediaEndpoint/A2DPSink
nov. 20 08:12:55 pseudo-N150ZU pulseaudio[1262]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
nov. 20 08:12:55 pseudo-N150ZU kernel: Bluetooth: RFCOMM TTY layer initialized
nov. 20 08:12:55 pseudo-N150ZU kernel: Bluetooth: RFCOMM socket layer initialized
nov. 20 08:12:55 pseudo-N150ZU kernel: Bluetooth: RFCOMM ver 1.11
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: Checking for pam module
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: Got pam-login
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: kwalletd: Waiting for hash on 15-
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: kwalletd: waitingForEnvironment on: 3
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: kwalletd: client connected
nov. 20 08:12:55 pseudo-N150ZU sddm[950]: kwalletd: client disconnected
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.bluez.obex' requested by ':1.5' (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined")
nov. 20 08:12:55 pseudo-N150ZU obexd[1392]: OBEX daemon 5.48
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.bluez.obex'
nov. 20 08:12:55 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kde.kuiserver' requested by ':1.19' (uid=1000 pid=1229 comm="/usr/bin/plasmashell " label="unconfined")
nov. 20 08:12:56 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kde.kuiserver'
nov. 20 08:12:56 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.70' (uid=1000 pid=1229 comm="/usr/bin/plasmashell " label="unconfined")
nov. 20 08:12:56 pseudo-N150ZU systemd[1]: Starting PackageKit Daemon...
nov. 20 08:12:56 pseudo-N150ZU PackageKit[1401]: daemon start
nov. 20 08:12:56 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.PackageKit'
nov. 20 08:12:56 pseudo-N150ZU systemd[1]: Started PackageKit Daemon.
nov. 20 08:12:57 pseudo-N150ZU PackageKit[1401]: get-updates transaction /534_cdbcdadb from uid 1000 finished with success after 760ms
nov. 20 08:13:02 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kde.runners.baloo' requested by ':1.19' (uid=1000 pid=1229 comm="/usr/bin/plasmashell " label="unconfined")
nov. 20 08:13:02 pseudo-N150ZU org.kde.runners.baloo[1118]: QSocketNotifier: Can only be used with threads started with QThread
nov. 20 08:13:02 pseudo-N150ZU org.kde.runners.baloo[1118]: QSocketNotifier: Can only be used with threads started with QThread
nov. 20 08:13:02 pseudo-N150ZU org.kde.runners.baloo[1118]: QSocketNotifier: Can only be used with threads started with QThread
nov. 20 08:13:02 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kde.runners.baloo'
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]: Creating the cache for:  "applications:CLion.desktop"
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]: Already in database?  true
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:       First update :  QDateTime(2019-10-10 17:22:17.000 CEST Qt::TimeSpec(LocalTime))
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:        Last update :  QDateTime(2019-11-19 18:14:23.000 CET Qt::TimeSpec(LocalTime))
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]: After the adjustment
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:      Current score :  26.9855
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:       First update :  QDateTime(2019-10-10 17:22:17.000 CEST Qt::TimeSpec(LocalTime))
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:        Last update :  QDateTime(2019-11-19 18:14:23.000 CET Qt::TimeSpec(LocalTime))
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]: Interval length is  0
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]:          New score :  27.9855
nov. 20 08:13:05 pseudo-N150ZU org.kde.ActivityManager[1118]: ResourceScoreUpdated: "b334ede8-dd12-4277-a9b3-066f35353139" "org.kde.krunner" "applications:CLion.desktop"
nov. 20 08:13:06 pseudo-N150ZU snapd[824]: stateengine.go:108: state ensure error: persistent network error: Get https://api.snapcraft.io/api/v1/snaps/sections: dial tcp: lookup api.snapcraft.io: Temporary failure in name resolution
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8066] policy: auto-activating connection 'quickyAP'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8084] device (wlp3s0): Activation: starting connection 'quickyAP' (4bcd013e-ee78-406f-ab27-8b707d783fc7)
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8087] device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8091] manager: NetworkManager state is now CONNECTING
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8097] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8100] device (wlp3s0): Activation: (wifi) access point 'quickyAP' has security, but secrets are required.
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8100] device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8352] device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8356] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8358] device (wlp3s0): Activation: (wifi) connection 'quickyAP' has security, and secrets exist.  No new secrets needed.
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8359] Config: added 'ssid' value 'quickyAP'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8359] Config: added 'scan_ssid' value '1'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8359] Config: added 'bgscan' value 'simple:30:-80:86400'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8359] Config: added 'key_mgmt' value 'WPA-PSK'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8360] Config: added 'auth_alg' value 'OPEN'
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8360] Config: added 'psk' value '<hidden>'
nov. 20 08:13:11 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: SME: Trying to authenticate with 40:d3:ae:4b:87:50 (SSID='quickyAP' freq=2437 MHz)
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: authenticate with 40:d3:ae:4b:87:50
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.8493] device (wlp3s0): supplicant interface state: ready -> authenticating
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: send auth to 40:d3:ae:4b:87:50 (try 1/3)
nov. 20 08:13:11 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: Trying to associate with 40:d3:ae:4b:87:50 (SSID='quickyAP' freq=2437 MHz)
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: authenticated
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: associate with 40:d3:ae:4b:87:50 (try 1/3)
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.9278] device (wlp3s0): supplicant interface state: authenticating -> associating
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: RX AssocResp from 40:d3:ae:4b:87:50 (capab=0x431 status=0 aid=1)
nov. 20 08:13:11 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: Associated with 40:d3:ae:4b:87:50
nov. 20 08:13:11 pseudo-N150ZU kernel: wlp3s0: associated
nov. 20 08:13:11 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
nov. 20 08:13:11 pseudo-N150ZU NetworkManager[811]: <info>  [1574233991.9912] device (wlp3s0): supplicant interface state: associating -> 4-way handshake
nov. 20 08:13:12 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: WPA: Key negotiation completed with 40:d3:ae:4b:87:50 [PTK=CCMP GTK=CCMP]
nov. 20 08:13:12 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to 40:d3:ae:4b:87:50 completed [id=0 id_str=]
nov. 20 08:13:12 pseudo-N150ZU kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
nov. 20 08:13:12 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-41 noise=9999 txrate=1000
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.0176] device (wlp3s0): supplicant interface state: 4-way handshake -> completed
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.0176] device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'quickyAP'.
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.0177] device (wlp3s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.0188] dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.0211] dhcp4 (wlp3s0): dhclient started with pid 1582
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::d533:62f1:c149:8afa.
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: New relevant interface wlp3s0.IPv6 for mDNS.
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: Registering new address record for fe80::d533:62f1:c149:8afa on wlp3s0.*.
nov. 20 08:13:12 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-44 noise=9999 txrate=72200
nov. 20 08:13:12 pseudo-N150ZU dhclient[1582]: DHCPDISCOVER on wlp3s0 to 255.255.255.255 port 67 interval 3 (xid=0x8ee6d20d)
nov. 20 08:13:12 pseudo-N150ZU dhclient[1582]: DHCPREQUEST of 192.168.43.89 on wlp3s0 to 255.255.255.255 port 67 (xid=0xdd2e68e)
nov. 20 08:13:12 pseudo-N150ZU dhclient[1582]: DHCPOFFER of 192.168.43.89 from 192.168.43.1
nov. 20 08:13:12 pseudo-N150ZU dhclient[1582]: DHCPACK of 192.168.43.89 from 192.168.43.1
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1585] dhcp4 (wlp3s0):   address 192.168.43.89
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1585] dhcp4 (wlp3s0):   plen 24 (255.255.255.0)
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1586] dhcp4 (wlp3s0):   gateway 192.168.43.1
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1586] dhcp4 (wlp3s0):   lease time 3600
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1586] dhcp4 (wlp3s0):   hostname 'pseudo-N150ZU'
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1586] dhcp4 (wlp3s0):   nameserver '192.168.43.1'
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1586] dhcp4 (wlp3s0): state changed unknown -> bound
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.43.89.
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: New relevant interface wlp3s0.IPv4 for mDNS.
nov. 20 08:13:12 pseudo-N150ZU avahi-daemon[802]: Registering new address record for 192.168.43.89 on wlp3s0.IPv4.
nov. 20 08:13:12 pseudo-N150ZU dhclient[1582]: bound to 192.168.43.89 -- renewal in 1738 seconds.
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1606] device (wlp3s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1614] device (wlp3s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1618] device (wlp3s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1620] manager: NetworkManager state is now CONNECTED_LOCAL
nov. 20 08:13:12 pseudo-N150ZU whoopsie[1022]: [08:13:12] Cannot reach: https://daisy.ubuntu.com
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1644] manager: NetworkManager state is now CONNECTED_SITE
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1645] policy: set 'quickyAP' (wlp3s0) as default for IPv4 routing and DNS
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1650] device (wlp3s0): Activation: successful, device activated.
nov. 20 08:13:12 pseudo-N150ZU dbus-daemon[804]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.13' (uid=0 pid=811 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
nov. 20 08:13:12 pseudo-N150ZU NetworkManager[811]: <info>  [1574233992.1662] manager: NetworkManager state is now CONNECTED_GLOBAL
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Starting Network Manager Script Dispatcher Service...
nov. 20 08:13:12 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
nov. 20 08:13:12 pseudo-N150ZU whoopsie[1022]: [08:13:12] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/1
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Started Network Manager Script Dispatcher Service.
nov. 20 08:13:12 pseudo-N150ZU nm-dispatcher[1593]: req:1 'up' [wlp3s0]: new request (1 scripts)
nov. 20 08:13:12 pseudo-N150ZU nm-dispatcher[1593]: req:1 'up' [wlp3s0]: start running ordered scripts...
nov. 20 08:13:12 pseudo-N150ZU whoopsie[1022]: [08:13:12] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/1
nov. 20 08:13:12 pseudo-N150ZU whoopsie[1022]: [08:13:12] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/1
nov. 20 08:13:12 pseudo-N150ZU nm-dispatcher[1593]: req:2 'connectivity-change': new request (1 scripts)
nov. 20 08:13:12 pseudo-N150ZU systemd-resolved[713]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
nov. 20 08:13:12 pseudo-N150ZU whoopsie[1022]: [08:13:12] online
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Reloading OpenBSD Secure Shell server.
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Received SIGHUP; restarting.
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Reloaded OpenBSD Secure Shell server.
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Server listening on 0.0.0.0 port 22.
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Server listening on :: port 22.
nov. 20 08:13:12 pseudo-N150ZU systemd-resolved[713]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Reloading OpenBSD Secure Shell server.
nov. 20 08:13:12 pseudo-N150ZU nm-dispatcher[1593]: req:2 'connectivity-change': start running ordered scripts...
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Received SIGHUP; restarting.
nov. 20 08:13:12 pseudo-N150ZU systemd[1]: Reloaded OpenBSD Secure Shell server.
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Server listening on 0.0.0.0 port 22.
nov. 20 08:13:12 pseudo-N150ZU sshd[900]: Server listening on :: port 22.
nov. 20 08:13:13 pseudo-N150ZU systemd-resolved[713]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
nov. 20 08:13:13 pseudo-N150ZU systemd-resolved[713]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
nov. 20 08:13:13 pseudo-N150ZU systemd-resolved[713]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
nov. 20 08:13:13 pseudo-N150ZU PackageKit[1401]: get-updates transaction /535_dcaccdbd from uid 1000 finished with success after 789ms
nov. 20 08:13:13 pseudo-N150ZU avahi-daemon[802]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address fe80::d533:62f1:c149:8afa.
nov. 20 08:13:13 pseudo-N150ZU avahi-daemon[802]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address 2a04:cec0:1117:ebe8:b9f2:b9c8:4c57:6db0.
nov. 20 08:13:13 pseudo-N150ZU avahi-daemon[802]: Registering new address record for 2a04:cec0:1117:ebe8:b9f2:b9c8:4c57:6db0 on wlp3s0.*.
nov. 20 08:13:13 pseudo-N150ZU avahi-daemon[802]: Withdrawing address record for fe80::d533:62f1:c149:8afa on wlp3s0.
nov. 20 08:13:13 pseudo-N150ZU NetworkManager[811]: <info>  [1574233993.6394] policy: set 'quickyAP' (wlp3s0) as default for IPv6 routing and DNS
nov. 20 08:13:14 pseudo-N150ZU systemd-timesyncd[717]: Synchronized to time server 91.189.91.157:123 (ntp.ubuntu.com).
nov. 20 08:13:15 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-46 noise=9999 txrate=72200
nov. 20 08:13:15 pseudo-N150ZU avahi-daemon[802]: Registering new address record for 2a04:cec0:1117:ebe8:accd:6677:7f2d:c394 on wlp3s0.*.
nov. 20 08:13:18 pseudo-N150ZU snapd[824]: daemon.go:576: gracefully waiting for running hooks
nov. 20 08:13:18 pseudo-N150ZU snapd[824]: daemon.go:578: done waiting for running hooks
nov. 20 08:13:18 pseudo-N150ZU snapd[824]: daemon stop requested to wait for socket activation
nov. 20 08:13:27 pseudo-N150ZU PackageKit[1401]: get-updates transaction /536_abbaabdb from uid 1000 finished with success after 4777ms
nov. 20 08:13:34 pseudo-N150ZU systemd[1]: Started Daily apt download activities.
nov. 20 08:13:34 pseudo-N150ZU systemd[1]: Starting Daily apt upgrade and clean activities...
nov. 20 08:13:35 pseudo-N150ZU systemd[1]: Starting Stop ureadahead data collection...
nov. 20 08:13:35 pseudo-N150ZU systemd[1]: Started Stop ureadahead data collection.
nov. 20 08:13:40 pseudo-N150ZU systemd[1]: Started Daily apt upgrade and clean activities.
nov. 20 08:13:40 pseudo-N150ZU systemd[1]: Startup finished in 5.641s (firmware) + 11.369s (loader) + 4.912s (kernel) + 57.562s (userspace) = 1min 19.486s.
nov. 20 08:13:40 pseudo-N150ZU wpa_supplicant[809]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-43 noise=9999 txrate=72200
nov. 20 08:15:56 pseudo-N150ZU dbus-daemon[804]: [system] Activating service name='org.debian.AptXapianIndex' requested by ':1.49' (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined") (using servicehelper)
nov. 20 08:15:56 pseudo-N150ZU dbus-daemon[804]: [system] Successfully activated service 'org.debian.AptXapianIndex'
nov. 20 08:15:56 pseudo-N150ZU dbus-daemon[804]: [system] Rejected send message, 1 matched rules; type="method_return", sender=":1.78" (uid=0 pid=2904 comm="/usr/bin/python3 /usr/share/apt-xapian-index/updat" label="unconfined") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.49" (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined")
nov. 20 08:16:36 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Activating service name='org.kubuntu.DriverManager' requested by ':1.5' (uid=1000 pid=1173 comm="kded5 [kdeinit5]                                  " label="unconfined")
nov. 20 08:16:36 pseudo-N150ZU dbus-daemon[1118]: [session uid=1000 pid=1116] Successfully activated service 'org.kubuntu.DriverManager'
nov. 20 08:16:52 pseudo-N150ZU org.kubuntu.DriverManager[1118]: DriverManager_DBus::devices START
nov. 20 08:16:52 pseudo-N150ZU org.kubuntu.DriverManager[1118]: DriverManager_DBus::devices END
nov. 20 08:17:01 pseudo-N150ZU CRON[2920]: pam_unix(cron:session): session opened for user root by (uid=0)
nov. 20 08:17:01 pseudo-N150ZU CRON[2921]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
nov. 20 08:17:01 pseudo-N150ZU CRON[2920]: pam_unix(cron:session): session closed for user root
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4:    [ 0] RxErr

Desole j ai laisse toute la partie liee au boot au cas ou

Hors ligne

#14 Le 20/11/2019, à 18:58

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

quicky a écrit :
sudo smartctl -s on -a /dev/nvme0
=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX6000PNP
Firmware Version:                   V9001b31
Firmware Updates (0x02):            1 Slot

=== START OF SMART DATA SECTION ===
Available Spare:                    100%
Available Spare Threshold:          32%
Percentage Used:                    0%

Data Units Read:                    14454200 [7,40 TB]
Data Units Written:                 14141104 [7,24 TB]

Power On Hours:                     137

Unsafe Shutdowns:                   52

Il y a pas mal de choses qui me gènent dans ce rapport smartctl

1)  La version du bios est  V9001b31    alors que partout dans internet on évoque la version   V9001C31. Mais je n'arrive  à trouver dans le site du constructeur
       https://www.techpowerup.com/review/adat … -pro-1-tb/

2) L'utilisation des cellules de secours est à 0%   C'est parfait!

3) Le ratio  Lecture/écriture       Je suis surpris d'avoir un ratio si  proche de 1


4) La quantité d'écriture  est de  7,24 TB      alors  que sa garantie de vie est estimée à   600 TB       donc plus de 1%     Cela ne serait si grave si....
https://www.techpowerup.com/review/adat … -pro-1-tb/

Mais cela fait quand même une moyenne d'écriture de 881 Mo par minute!

5) Le nombre d'heures d'utilisation  est faible  ( 137)      C'est un SSD qui ne va pas atteindre 10000 heures!!!!!  Heureusement qu'il est garanti 5 ans

6) Le nombre d'arrêts en catastrophes  => 52 est impressionnant        Toutes les 3 heures!!!!!

Il y a quelque chose qui cloche Mais quoi. ?        Il faudrait voir pourquoi une nouvelle version de bios a été diffusée si rapidement.

Dernière modification par geole (Le 21/11/2019, à 09:24)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#15 Le 20/11/2019, à 19:04

NicoApi73

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

C'est le port pci sur lequel il y a le controleur nvme qui remonte les erreurs.

Il n'y en a pas beaucoup et sont du niveau de sévérité le plus faible. Ca reste néanmoins inhabituel, d'autant que ton PC n'est pas sur du HW hyper récent (ta cpu est de Intel 8ième génération, la neuvième est sortie il y a de ça quelques mois déjà)

Vu le message, on peut supposer qu'il y a une trame envoyé par le SSD qui est mal réceptionnée. Difficile de savoir si c'est le disque, le controleur nvme ou le bridge pci qui est à la source de l'erreur (qui peut elle même être due à une configuration incorrecte). Je te déconseille de masquer les erreurs et de surveiller si elles deviennent plus fréquentes

EDIT : Je viens de voir le dernier post de geole. Je suis d'accord sur la vérification d'une mise à jour BIOS (et avant de faire quoique ce soit, de regarder ce qui a été corrigé avant tout flash du BIOS)

Dernière modification par NicoApi73 (Le 20/11/2019, à 19:07)

Hors ligne

#16 Le 20/11/2019, à 19:24

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Avec ce que je connais de l'autre discussion  dans laquelle tu indiques que le systeme "passe en mode lecture seule".
La trace montre  qu'il n'y a plus d'écriture à partir de ce message survenu 5 minutes après le boot

nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4: AER: Corrected error received: 0000:00:1d.4
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4:   device [8086:9db4] error status/mask=00000001/00002000
nov. 20 08:17:19 pseudo-N150ZU kernel: pcieport 0000:00:1d.4:    [ 0] RxErr

Je pense que cela se produit à cet instant   et que le firmware du disque va  faire plus un  sur son compteur  d'arrêt en castatrophe et que tu devras faire un fsck  pour remettre en état.
    Une cause habituelle:   L'alimentation électrique....    L'économie d'énergie ?   Un bug dans le bios ?
Il va y avoir à chercher............

Dernière modification par geole (Le 20/11/2019, à 19:31)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#17 Le 20/11/2019, à 19:37

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Tu pourrais déjà faire le point sur la gestion de l'énergie pour ce SSD dans le bios et dans ubuntu
J'ai trouvé ce document pour aider https://access.redhat.com/documentation … guide/aspm
J'espère que pour ubuntu, ce sont les même fichiers.

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#18 Le 20/11/2019, à 19:41

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

geole a écrit :

Tu pourrais déjà faire le point sur la gestion de l'énergie pour ce SSD dans le bios et dans ubuntu
J'ai trouvé ce document pour aider https://access.redhat.com/documentation … guide/aspm
J'espère que pour ubuntu, ce sont les même fichiers.

J ai ca

more /sys/module/pcie_aspm/parameters/policy
[default] performance powersave powersupersave

Hors ligne

#19 Le 20/11/2019, à 22:05

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Je ne sais pas si tu connais windows 10, mais il  serait bon que tu l'installes pour voir si sous windows le comportement est semblable.
Avec windows tu pourrais alors faire un test du SSD et voir s'il y a une proposition de changer le bios.
Le document expliquant les outils est là http://www.adata.com/AppStore/ADATA%20S … V10_EN.pdf
Il semble que cette société ne publie pas la liste de  ses firmwares.

Tu n'es pas le seul à avoir ce style de problème

Dans ce lien   qui date de septembre https://bbs.archlinux.org/viewtopic.php?id=249098
Il semble que c'est pareil pour windows et qu'il n'y a pas de nouveau firmware

Dans ce lien de la même époque, https://www.pcspecialist.ie/forums/thre … ost-447873
il semble qu'upgrader en version 4.15 a fait disparaitre le problème

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#20 Le 21/11/2019, à 09:07

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

geole a écrit :

Je ne sais pas si tu connais windows 10, mais il  serait bon que tu l'installes pour voir si sous windows le comportement est semblable.
Avec windows tu pourrais alors faire un test du SSD et voir s'il y a une proposition de changer le bios.

Je n ai pas de Windows....

geole a écrit :

Tu n'es pas le seul à avoir ce style de problème

Dans ce lien de la même époque, https://www.pcspecialist.ie/forums/thre … ost-447873
il semble qu'upgrader en version 4.15 a fait disparaitre le problème

Ah je l avais pas vu celui la, merci pour l info !
Je viens d installer le noyau general availability 4.15.0-70 mais pas de wifi sad

Hors ligne

#21 Le 21/11/2019, à 09:22

xubu1957

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Bonjour,

quicky a écrit :

Je viens d installer le noyau general availability 4.15.0-70 mais pas de wifi

Fournis :

lsmod | grep cfg80211
rfkill list all

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#22 Le 21/11/2019, à 09:33

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Bonjour.
N'y aurait-il pas le même problême que celui décrit ici https://answers.microsoft.com/en-us/win … 5864447890
avec ubunty
A mon avis, avec un petit bug du firmware, il relit et réecrit la totalité  du disque à chaque arrêt anormal.

Il serait bon que tu vérifies de nouveau le monde economie d'energie . s'il  est toujours sur default, il faut le mettre sur performance Mais hier, j'ai vu plein de bug sur la modiffication de cette option.
Par exemple https://askubuntu.com/questions/1095051 … ntu-server

Dernière modification par geole (Le 21/11/2019, à 09:56)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#23 Le 21/11/2019, à 09:58

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

geole a écrit :

Bonjour.
N'y aurait-il pas le même problême que celui décrit ici https://answers.microsoft.com/en-us/win … 5864447890
avec ubunty
A mon avis, avec un petit bug du firmware, il relit et réecrit la totalité  du disque à chaque arrêt anormal.

Je pense pas, le compteur d arret brutal est passe a 53 mais j ai effectivement eu un freeze hier soir et j ai fait plusieurs reboot depuis.

Hors ligne

#24 Le 21/11/2019, à 10:00

quicky

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

xubu1957 a écrit :

Bonjour,

quicky a écrit :

Je viens d installer le noyau general availability 4.15.0-70 mais pas de wifi

Fournis :

lsmod | grep cfg80211
rfkill list all

Bonjour,

Avec le noyau 4.15 pas de cfg80211:

Module                  Size  Used by
nls_iso8859_1          16384  1
kvm_intel             217088  0
kvm                   610304  1 kvm_intel
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
pcbc                   16384  0
joydev                 24576  0
aesni_intel           188416  0
aes_x86_64             20480  1 aesni_intel
input_leds             16384  0
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
serio_raw              16384  0
acpi_pad              180224  0
video                  45056  0
sch_fq_codel           20480  1
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 parport_pc,lp,ppdev
ip_tables              28672  0
x_tables               40960  1 ip_tables
autofs4                40960  2
psmouse               151552  0
nvme                   36864  0
nvme_core              61440  5 nvme
ahci                   40960  0
libahci                32768  1 ahci

En 5.x j en ai beaucoup plus:

Module                  Size  Used by
ccm                    20480  6
rfcomm                 77824  16
cmac                   16384  0
bnep                   24576  2
snd_hda_codec_hdmi     53248  1
snd_soc_skl           106496  0
snd_soc_hdac_hda       24576  1 snd_soc_skl
snd_hda_ext_core       28672  2 snd_soc_hdac_hda,snd_soc_skl
snd_soc_skl_ipc        65536  1 snd_soc_skl
snd_soc_sst_ipc        20480  1 snd_soc_skl_ipc
snd_soc_sst_dsp        36864  1 snd_soc_skl_ipc
snd_soc_acpi_intel_match    28672  1 snd_soc_skl
snd_soc_acpi           16384  2 snd_soc_acpi_intel_match,snd_soc_skl
nls_iso8859_1          16384  1
intel_rapl             24576  0
snd_soc_core          233472  2 snd_soc_hdac_hda,snd_soc_skl
snd_hda_codec_realtek   114688  1
x86_pkg_temp_thermal    20480  0
intel_powerclamp       20480  0
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_compress           24576  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
arc4                   16384  2
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
coretemp               20480  0
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_hda_intel          49152  3
kvm_intel             241664  0
snd_hda_codec         135168  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek,snd_soc_hdac_hda
snd_hda_core           86016  8 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_hdac_hda,snd_soc_skl
snd_hwdep              20480  1 snd_hda_codec
snd_pcm               102400  8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
crct10dif_pclmul       16384  1
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_seq_midi           20480  0
hid_multitouch         28672  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            36864  1 snd_seq_midi
iwlmvm                385024  0
hid_generic            16384  0
aesni_intel           372736  4
mac80211              819200  1 iwlmvm
snd_seq                69632  2 snd_seq_midi,snd_seq_midi_event
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper            16384  1 aesni_intel
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
intel_cstate           20480  0
snd_timer              36864  2 snd_seq,snd_pcm
intel_rapl_perf        16384  0
snd                    86016  19 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
iwlwifi               315392  1 iwlmvm
btusb                  49152  0
uvcvideo               94208  0
btrtl                  20480  1 btusb
joydev                 28672  0
btbcm                  16384  1 btusb
videobuf2_vmalloc      20480  1 uvcvideo
btintel                24576  1 btusb
input_leds             16384  0
videobuf2_memops       20480  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_common       45056  2 videobuf2_v4l2,uvcvideo
bluetooth             557056  43 btrtl,btintel,btbcm,bnep,btusb,rfcomm
serio_raw              20480  0
rtsx_pci_ms            24576  0
cfg80211              679936  3 iwlmvm,iwlwifi,mac80211
intel_wmi_thunderbolt    20480  0
videodev              204800  3 videobuf2_v4l2,uvcvideo,videobuf2_common
soundcore              16384  1 snd
media                  53248  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
memstick               20480  1 rtsx_pci_ms
idma64                 20480  0
virt_dma               20480  1 idma64
ecdh_generic           28672  1 bluetooth
intel_lpss_pci         20480  0
mei_me                 40960  0
mei                   106496  1 mei_me
intel_pch_thermal      16384  0
intel_lpss             16384  1 intel_lpss_pci
intel_hid              20480  0
acpi_pad              184320  0
sparse_keymap          16384  1 intel_hid
mac_hid                16384  0
sch_fq_codel           20480  6
parport_pc             36864  0
ppdev                  24576  0
lp                     20480  0
parport                53248  3 parport_pc,lp,ppdev
ip_tables              32768  0
x_tables               40960  1 ip_tables
autofs4                45056  2
i915                 1826816  17
kvmgt                  28672  0
vfio_mdev              16384  0
mdev                   24576  2 kvmgt,vfio_mdev
vfio_iommu_type1       28672  0
vfio                   32768  3 kvmgt,vfio_mdev,vfio_iommu_type1
kvm                   647168  2 kvmgt,kvm_intel
irqbypass              16384  1 kvm
i2c_algo_bit           16384  1 i915
drm_kms_helper        180224  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
rtsx_pci_sdmmc         28672  0
sysimgblt              16384  1 drm_kms_helper
nvme                   45056  3
fb_sys_fops            16384  1 drm_kms_helper
r8169                  86016  0
psmouse               151552  0
nvme_core              94208  5 nvme
drm                   483328  9 drm_kms_helper,i915
rtsx_pci               61440  2 rtsx_pci_sdmmc,rtsx_pci_ms
ahci                   40960  0
realtek                20480  0
libahci                32768  1 ahci
i2c_hid                28672  0
wmi                    28672  1 intel_wmi_thunderbolt
hid                   126976  3 i2c_hid,hid_multitouch,hid_generic
video                  49152  1 i915

De meme pour le rfkill rien en 4.15 alors qu en 5.x:

0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no

Hors ligne

#25 Le 21/11/2019, à 10:02

geole

Re : Problemes avec SSD ADATA 1T SX6000 Pro PCIe M.2

Piste économie d'énergiie.

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

Pages : 1 2