#1 Le 06/10/2021, à 08:04
- hyacinthus
Échec de l'autotest (court ou étendu) d'estimation globale du disque
Salut,
Il y a deux semaines, la lanière de mon sac en bandoulière a subitement lâchée, alors que je me tenais debout dans la rue, et le sac -ainsi que l'ordinateur portable qui s'y trouvait- chut d'un peu plus de la moitié de ma hauteur et heurta l'asphalte du trottoir. Preuve du choc, la coque s'est fissurée en un angle de l'ordinateur.
Celui-ci démarre toujours. Le système d'exploitation de Windows démarrait, mais celui d'Ubuntu lançait la busybox. Après l'fsck que suggérait la busybox, j'ai pu retrouver Ubuntu, qui est tout de même beaucoup plus long.
Les donnée S.M.A.R.T. et autotests du logiciel Disques m'indiquaient deux secteurs défectueux, mais son auto-estimation est que le seuil est non-dépassé. L'autotest, en revanche, échoue systématiquement à dépasser les dix pour cent d'analyse ("Autotest en cours --- 90 % restant"), puis renonce d'un "échec de l'auto-test" en capitales rouges. Après ces échecs, le logiciel disque indiquait trois, puis cinq, puis neuf secteurs défectueux.
J'ai acheté un disque dur externe pour copier les données importantes de mon disque dur, ai copié la plupart de celles-ci, et en ai emprunté un nouveau en attendant.
J'y reviens deux semaines plus tard pour achever ces copies de sauvegarde et pour tenter de résoudre le problème.
J'en suis là, à présent :
- mon ordinateur est un Easynote ENLG81BA
- Ubuntu 20.04.3 LTS est significativement plus lent au démarrage et à l'utilisation de Firefox qu'il ne l'était avant le choc ;
- Windows 10 fonctionne mieux ;
- les deux systèmes d'exploitation sont sur des partitions distinctes d'un même disque dur [modèle : ST1000LM024 HN-M101MBB (2BA30001)] dont 9 secteurs sont reconnus défectueux ;
- Je n'ai guère testé les autres applications, ni n'ai mis à jour le système d'exploitation ;
- les autotests court et étendu du logiciel Disques faillent systématiquement alors que 90 % du test semble encore à faire) ;
- le logiciel Disques auto-estime que le seuil n'est pas dépassé.
Que devrais-je faire ?
Merci d'avoir pris le temps de me lire,
H.
Dernière modification par hyacinthus (Le 06/10/2021, à 09:25)
Hors ligne
#2 Le 06/10/2021, à 08:52
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bonjour.
Peux-tu publier le rapport smartctl?
sudo smartctl -s on -a /dev/sdaÀprès une chute, je serais surpris qu'il n'y ait que 9 secteurs impactés.
Si c'est vrai, la commande hdparm bien paramétrée va remettre en état.
Dernière modification par geole (Le 06/10/2021, à 08:53)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 06/10/2021, à 09:28
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bonjour Geole,
Merci beaucoup pour ta réponse.
Voici le rapport de la commande smartctl :
###:/$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S31QJ9CG804810
LU WWN Device Id: 5 0004cf 21050e48b
Firmware Version: 2BA30001
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 6 10:28:07 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4660
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11194
3 Spin_Up_Time 0x0023 092 088 025 Pre-fail Always - 2468
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always - 18263
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12068
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4433
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 207
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 163
194 Temperature_Celsius 0x0002 064 039 000 Old_age Always - 29 (Min/Max 5/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 30501
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 646
225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361278
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 12067 109692008
# 2 Short offline Completed: read failure 90% 12066 109692008
# 3 Extended offline Completed: read failure 90% 12065 109692008
# 4 Short offline Completed: read failure 90% 12065 109692008
# 5 Extended offline Aborted by host 90% 12028 -
# 6 Extended offline Completed: read failure 90% 12028 109692008
# 7 Short offline Interrupted (host reset) 80% 12028 -
# 8 Short offline Interrupted (host reset) 90% 12028 -
# 9 Short offline Completed: read failure 90% 12027 109692008
#10 Short offline Completed: read failure 90% 12027 109692008
#11 Short offline Completed: read failure 70% 12026 109692008
#12 Extended offline Completed: read failure 90% 12025 109692008
#13 Short offline Completed without error 00% 9910 -
#14 Short offline Completed without error 00% 5182 -
#15 Short offline Completed: read failure 90% 4838 91263656
#16 Short offline Completed: read failure 90% 4838 91263656
#17 Short offline Completed without error 00% 4829 -
#18 Short offline Completed without error 00% 4829 -
#19 Extended offline Completed without error 00% 4824 -
#20 Extended offline Aborted by host 80% 4821 -
#21 Extended offline Aborted by host 40% 4820 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Dernière modification par hyacinthus (Le 06/10/2021, à 09:58)
Hors ligne
#4 Le 06/10/2021, à 10:02
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Vu cela
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 9
Sector Sizes: 512 bytes logical, 4096 bytes physical
Short offline Completed: read failure 90% 12067 109692008Tu vas réparer 8 secteurs de cette façon
Sect=109692008
for (( I=0; I < 8; I++ )); do
sudo hdparm --yes-i-know-what-i-am-doing --read-sector $(($Sect+$I)) /dev/sda
sleep 5
donePuis tu relanceras un test court pour trouver le neuvième secteur que tu répareras de la même façon
puis tu lanceras un test long afin de voir s'il n'y en a pas d'autres
sudo smartctl -t select,0-1999999999 /dev/sda et tu posteras un retour la commande
sudo smartctl -A /dev/sda lorsque cette commande de test sera finie
Pour son suivi
sudo smartctl -a /dev/sda | grep leftDernière modification par geole (Le 06/10/2021, à 10:05)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 06/10/2021, à 10:43
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Salut Geole,
Merci encore.
Je n'étais pas trop sûr de savoir s'il me fallait faire "entrer" entre chacune des lignes de ta commande ou tout taper à la suite.
J'ai finalement copié ta commande depuis le forum, collée dans le terminal. Le terminal a récupéré le formatage du forum, avec la mise à la ligne correspondante, mais précédée d'un symbole ">".
J'espère qu'il fallait bien faire ainsi.
Après avoir appuyé sur entrée, voici le résultat de ma réparation des huit secteurs :
###:/$ Sect=109692008
###:/$ Sect=109692008
###:/$ for (( I=0; I < 8; I++ )); do
> sudo hdparm --yes-i-know-what-i-am-doing --read-sector $(($Sect+$I)) /dev/sda
> sleep 5
> done
[sudo] Mot de passe de ### :
/dev/sda:
reading sector 109692008: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692009: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 69 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692010: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6a 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692011: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692012: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692013: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6d 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692014: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
/dev/sda:
reading sector 109692015: SG_IO: bad/missing sense data, sb[]: 70 00 03 00 00 00 00 0a 40 51 e6 01 11 04 00 00 00 6f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
succeeded
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000Puis celui de mon test court (mais je réalise que tu me prescrivais probablement de faire un test court depuis l'interface graphique de Disques, est-ce le cas ?) :
###:/$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S31QJ9CG804810
LU WWN Device Id: 5 0004cf 21050e48b
Firmware Version: 2BA30001
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 6 11:34:09 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4746
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11194
3 Spin_Up_Time 0x0023 092 088 025 Pre-fail Always - 2468
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always - 18263
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12069
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4433
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 207
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 163
194 Temperature_Celsius 0x0002 064 039 000 Old_age Always - 35 (Min/Max 5/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 30506
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 646
225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361278
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6f c4 89 e6 Error: UNC at LBA = 0x0689c46f = 109692015
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6f c4 89 e6 00 00:00:15.860 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.860 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
35 00 08 b8 00 56 e0 00 00:00:15.859 WRITE DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
Error 7 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6e c4 89 e6 Error: UNC at LBA = 0x0689c46e = 109692014
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6e c4 89 e6 00 00:00:15.852 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.852 IDENTIFY DEVICE
ca 00 08 18 fa c0 e9 00 00:00:15.851 WRITE DMA
ca 00 20 10 75 54 e7 00 00:00:15.851 WRITE DMA
ca 00 18 f0 74 54 e7 00 00:00:15.851 WRITE DMA
Error 6 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6d c4 89 e6 Error: UNC at LBA = 0x0689c46d = 109692013
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6d c4 89 e6 00 00:00:15.843 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.843 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.842 CHECK POWER MODE
ea 00 00 00 00 00 e0 00 00:00:15.840 FLUSH CACHE EXT
ca 00 08 88 8a 5e e9 00 00:00:15.840 WRITE DMA
Error 5 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6c c4 89 e6 Error: UNC at LBA = 0x0689c46c = 109692012
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6c c4 89 e6 00 00:00:15.834 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.834 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.832 CHECK POWER MODE
25 00 08 30 3a 0f e0 00 00:00:15.832 READ DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.831 FLUSH CACHE EXT
Error 4 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6b c4 89 e6 Error: UNC at LBA = 0x0689c46b = 109692011
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6b c4 89 e6 00 00:00:15.826 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.826 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
ca 00 08 18 8a 5e e9 00 00:00:15.823 WRITE DMA
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 12067 109692008
# 2 Short offline Completed: read failure 90% 12066 109692008
# 3 Extended offline Completed: read failure 90% 12065 109692008
# 4 Short offline Completed: read failure 90% 12065 109692008
# 5 Extended offline Aborted by host 90% 12028 -
# 6 Extended offline Completed: read failure 90% 12028 109692008
# 7 Short offline Interrupted (host reset) 80% 12028 -
# 8 Short offline Interrupted (host reset) 90% 12028 -
# 9 Short offline Completed: read failure 90% 12027 109692008
#10 Short offline Completed: read failure 90% 12027 109692008
#11 Short offline Completed: read failure 70% 12026 109692008
#12 Extended offline Completed: read failure 90% 12025 109692008
#13 Short offline Completed without error 00% 9910 -
#14 Short offline Completed without error 00% 5182 -
#15 Short offline Completed: read failure 90% 4838 91263656
#16 Short offline Completed: read failure 90% 4838 91263656
#17 Short offline Completed without error 00% 4829 -
#18 Short offline Completed without error 00% 4829 -
#19 Extended offline Completed without error 00% 4824 -
#20 Extended offline Aborted by host 80% 4821 -
#21 Extended offline Aborted by host 40% 4820 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Je ne suis pas sûr de comprendre comment saisir identifier le 9e secteur défectueux et donc que répéter, pour le réparer de la même façon.
Dois-je plutôt faire un test depuis l'interface graphique de Disques ?
(Désolé de ne pas parfaitement comprendre tes instructions).
[on dirait que ces erreurs sont antérieures au choc].
Dernière modification par hyacinthus (Le 06/10/2021, à 11:00)
Hors ligne
#6 Le 06/10/2021, à 11:56
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Je me suis trompé dans la copie de la commande de réparation!!!! J'ai fourni celle du diagnostic.
Voici la bonne. A faire comme tu as fait
Sect=109692008
for (( I=0; I < 8; I++ )); do
sudo hdparm --yes-i-know-what-i-am-doing --write-sector $(($Sect+$I)) /dev/sda
sleep 5
doneLes grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 06/10/2021, à 13:42
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Voici les résultats :
###:/$ Sect=109692008
###:/$ for (( I=0; I < 8; I++ )); do
> sudo hdparm --yes-i-know-what-i-am-doing --write-sector $(($Sect+$I)) /dev/sda
> sleep 5
> done
[sudo] Mot de passe de ### :
/dev/sda:
re-writing sector 109692008: succeeded
/dev/sda:
re-writing sector 109692009: succeeded
/dev/sda:
re-writing sector 109692010: succeeded
/dev/sda:
re-writing sector 109692011: succeeded
/dev/sda:
re-writing sector 109692012: succeeded
/dev/sda:
re-writing sector 109692013: succeeded
/dev/sda:
re-writing sector 109692014: succeeded
/dev/sda:
re-writing sector 109692015: succeededpuis :
###:/$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S31QJ9CG804810
LU WWN Device Id: 5 0004cf 21050e48b
Firmware Version: 2BA30001
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 6 14:39:42 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4901
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11194
3 Spin_Up_Time 0x0023 092 088 025 Pre-fail Always - 2460
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always - 18264
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12070
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4434
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 207
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 163
194 Temperature_Celsius 0x0002 064 039 000 Old_age Always - 30 (Min/Max 5/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 30508
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 646
225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361279
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6f c4 89 e6 Error: UNC at LBA = 0x0689c46f = 109692015
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6f c4 89 e6 00 00:00:15.860 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.860 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
35 00 08 b8 00 56 e0 00 00:00:15.859 WRITE DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
Error 7 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6e c4 89 e6 Error: UNC at LBA = 0x0689c46e = 109692014
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6e c4 89 e6 00 00:00:15.852 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.852 IDENTIFY DEVICE
ca 00 08 18 fa c0 e9 00 00:00:15.851 WRITE DMA
ca 00 20 10 75 54 e7 00 00:00:15.851 WRITE DMA
ca 00 18 f0 74 54 e7 00 00:00:15.851 WRITE DMA
Error 6 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6d c4 89 e6 Error: UNC at LBA = 0x0689c46d = 109692013
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6d c4 89 e6 00 00:00:15.843 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.843 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.842 CHECK POWER MODE
ea 00 00 00 00 00 e0 00 00:00:15.840 FLUSH CACHE EXT
ca 00 08 88 8a 5e e9 00 00:00:15.840 WRITE DMA
Error 5 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6c c4 89 e6 Error: UNC at LBA = 0x0689c46c = 109692012
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6c c4 89 e6 00 00:00:15.834 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.834 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.832 CHECK POWER MODE
25 00 08 30 3a 0f e0 00 00:00:15.832 READ DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.831 FLUSH CACHE EXT
Error 4 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6b c4 89 e6 Error: UNC at LBA = 0x0689c46b = 109692011
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6b c4 89 e6 00 00:00:15.826 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.826 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
ca 00 08 18 8a 5e e9 00 00:00:15.823 WRITE DMA
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 12067 109692008
# 2 Short offline Completed: read failure 90% 12066 109692008
# 3 Extended offline Completed: read failure 90% 12065 109692008
# 4 Short offline Completed: read failure 90% 12065 109692008
# 5 Extended offline Aborted by host 90% 12028 -
# 6 Extended offline Completed: read failure 90% 12028 109692008
# 7 Short offline Interrupted (host reset) 80% 12028 -
# 8 Short offline Interrupted (host reset) 90% 12028 -
# 9 Short offline Completed: read failure 90% 12027 109692008
#10 Short offline Completed: read failure 90% 12027 109692008
#11 Short offline Completed: read failure 70% 12026 109692008
#12 Extended offline Completed: read failure 90% 12025 109692008
#13 Short offline Completed without error 00% 9910 -
#14 Short offline Completed without error 00% 5182 -
#15 Short offline Completed: read failure 90% 4838 91263656
#16 Short offline Completed: read failure 90% 4838 91263656
#17 Short offline Completed without error 00% 4829 -
#18 Short offline Completed without error 00% 4829 -
#19 Extended offline Completed without error 00% 4824 -
#20 Extended offline Aborted by host 80% 4821 -
#21 Extended offline Aborted by host 40% 4820 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Hors ligne
#8 Le 06/10/2021, à 14:15
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Il faut maintenant relancer un test court
S'il plante, tu redonnes le retour de la commande smartctl
S'il ne plante pas, il faut lancer un test long, suivre son exécution et lorsque c'est terminé, donner le retour de la commande smartctl
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 06/10/2021, à 14:23
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Le test court a planté : "échec de l'auto-test" (alors qu'il restait 90 % à faire).
Voici le retour de la commande smartctl :
###:/$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de ### :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S31QJ9CG804810
LU WWN Device Id: 5 0004cf 21050e48b
Firmware Version: 2BA30001
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 6 15:22:01 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4990
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11194
3 Spin_Up_Time 0x0023 092 088 025 Pre-fail Always - 2460
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always - 18264
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12071
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4434
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 207
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 163
194 Temperature_Celsius 0x0002 064 039 000 Old_age Always - 32 (Min/Max 5/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 30510
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 646
225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361279
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6f c4 89 e6 Error: UNC at LBA = 0x0689c46f = 109692015
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6f c4 89 e6 00 00:00:15.860 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.860 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
35 00 08 b8 00 56 e0 00 00:00:15.859 WRITE DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
Error 7 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6e c4 89 e6 Error: UNC at LBA = 0x0689c46e = 109692014
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6e c4 89 e6 00 00:00:15.852 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.852 IDENTIFY DEVICE
ca 00 08 18 fa c0 e9 00 00:00:15.851 WRITE DMA
ca 00 20 10 75 54 e7 00 00:00:15.851 WRITE DMA
ca 00 18 f0 74 54 e7 00 00:00:15.851 WRITE DMA
Error 6 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6d c4 89 e6 Error: UNC at LBA = 0x0689c46d = 109692013
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6d c4 89 e6 00 00:00:15.843 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.843 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.842 CHECK POWER MODE
ea 00 00 00 00 00 e0 00 00:00:15.840 FLUSH CACHE EXT
ca 00 08 88 8a 5e e9 00 00:00:15.840 WRITE DMA
Error 5 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6c c4 89 e6 Error: UNC at LBA = 0x0689c46c = 109692012
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6c c4 89 e6 00 00:00:15.834 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.834 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.832 CHECK POWER MODE
25 00 08 30 3a 0f e0 00 00:00:15.832 READ DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.831 FLUSH CACHE EXT
Error 4 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6b c4 89 e6 Error: UNC at LBA = 0x0689c46b = 109692011
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6b c4 89 e6 00 00:00:15.826 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.826 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
ca 00 08 18 8a 5e e9 00 00:00:15.823 WRITE DMA
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 12071 319686912
# 2 Short offline Completed: read failure 90% 12071 319686912
# 3 Short offline Completed: read failure 90% 12067 109692008
# 4 Short offline Completed: read failure 90% 12066 109692008
# 5 Extended offline Completed: read failure 90% 12065 109692008
# 6 Short offline Completed: read failure 90% 12065 109692008
# 7 Extended offline Aborted by host 90% 12028 -
# 8 Extended offline Completed: read failure 90% 12028 109692008
# 9 Short offline Interrupted (host reset) 80% 12028 -
#10 Short offline Interrupted (host reset) 90% 12028 -
#11 Short offline Completed: read failure 90% 12027 109692008
#12 Short offline Completed: read failure 90% 12027 109692008
#13 Short offline Completed: read failure 70% 12026 109692008
#14 Extended offline Completed: read failure 90% 12025 109692008
#15 Short offline Completed without error 00% 9910 -
#16 Short offline Completed without error 00% 5182 -
#17 Short offline Completed: read failure 90% 4838 91263656
#18 Short offline Completed: read failure 90% 4838 91263656
#19 Short offline Completed without error 00% 4829 -
#20 Short offline Completed without error 00% 4829 -
#21 Extended offline Completed without error 00% 4824 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Dernière modification par hyacinthus (Le 06/10/2021, à 14:23)
Hors ligne
#10 Le 06/10/2021, à 14:29
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Le secteur détecté par le test rapide
# 1 Short offline Completed: read failure 90% 12071 319686912
La réparation
Sect=319686912
for (( I=0; I < 8; I++ )); do
sudo hdparm --yes-i-know-what-i-am-doing --write-sector $(($Sect+$I)) /dev/sda
sleep 5
doneet un nouveau test rapide à lancer, s'il est bon faire le test long
S'il est mauvais réparer avec la même méthode
Dernière modification par geole (Le 06/10/2021, à 14:32)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#11 Le 06/10/2021, à 14:39
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Merci beaucoup Geole,
J'en déduis que je ne touche jamais à la graphie de ta commande, exception faite de sa première ligne "sect=#" où je renseigne le premier "LBA_of_first_error" du SMART Self-test log structure revision number 1" de la première ligne, jusqu'à ce que la commande de vérification ne m'indique plus de problèmes. Me trompé-je ?
Je lance les commandes que tu me suggères.
Dernière modification par hyacinthus (Le 06/10/2021, à 14:40)
Hors ligne
#12 Le 06/10/2021, à 14:53
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Disques échoue à nouveau son auto-test court, sans dépasser les 10 %, toutefois, le texte de l'auto-diagnostique est devenu : "le disque est sain, 7 secteurs endommagés" (plutôt que 8 précédemment).
Dois-je modifier la commande
for (( I=0; I < 8; I++ )); dopar
for (( I=0; I < 7; I++ )); doou est-ce sans lien aucun ?
Au vu de ce rapport :
###:/sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-88-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S31QJ9CG804810
LU WWN Device Id: 5 0004cf 21050e48b
Firmware Version: 2BA30001
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 6 15:53:30 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 5026
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11194
3 Spin_Up_Time 0x0023 094 088 025 Pre-fail Always - 1939
4 Start_Stop_Count 0x0032 082 082 000 Old_age Always - 18265
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12071
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4435
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 207
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 164
194 Temperature_Celsius 0x0002 064 039 000 Old_age Always - 33 (Min/Max 5/61)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 7
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 30510
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 646
225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361279
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6f c4 89 e6 Error: UNC at LBA = 0x0689c46f = 109692015
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6f c4 89 e6 00 00:00:15.860 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.860 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
35 00 08 b8 00 56 e0 00 00:00:15.859 WRITE DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.859 FLUSH CACHE EXT
Error 7 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6e c4 89 e6 Error: UNC at LBA = 0x0689c46e = 109692014
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6e c4 89 e6 00 00:00:15.852 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.852 IDENTIFY DEVICE
ca 00 08 18 fa c0 e9 00 00:00:15.851 WRITE DMA
ca 00 20 10 75 54 e7 00 00:00:15.851 WRITE DMA
ca 00 18 f0 74 54 e7 00 00:00:15.851 WRITE DMA
Error 6 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6d c4 89 e6 Error: UNC at LBA = 0x0689c46d = 109692013
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6d c4 89 e6 00 00:00:15.843 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.843 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.842 CHECK POWER MODE
ea 00 00 00 00 00 e0 00 00:00:15.840 FLUSH CACHE EXT
ca 00 08 88 8a 5e e9 00 00:00:15.840 WRITE DMA
Error 5 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6c c4 89 e6 Error: UNC at LBA = 0x0689c46c = 109692012
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6c c4 89 e6 00 00:00:15.834 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.834 IDENTIFY DEVICE
e5 00 00 00 00 00 00 00 00:00:15.832 CHECK POWER MODE
25 00 08 30 3a 0f e0 00 00:00:15.832 READ DMA EXT
ea 00 00 00 00 00 e0 00 00:00:15.831 FLUSH CACHE EXT
Error 4 occurred at disk power-on lifetime: 12069 hours (502 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 6b c4 89 e6 Error: UNC at LBA = 0x0689c46b = 109692011
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 6b c4 89 e6 00 00:00:15.826 READ SECTOR(S)
ec 00 01 00 00 00 40 00 00:00:15.826 IDENTIFY DEVICE
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
ca 00 08 18 8a 5e e9 00 00:00:15.823 WRITE DMA
ea 00 00 00 00 00 e0 00 00:00:15.823 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 12071 319687152
# 2 Short offline Completed: read failure 90% 12071 319686912
# 3 Short offline Completed: read failure 90% 12071 319686912
# 4 Short offline Completed: read failure 90% 12067 109692008
# 5 Short offline Completed: read failure 90% 12066 109692008
# 6 Extended offline Completed: read failure 90% 12065 109692008
# 7 Short offline Completed: read failure 90% 12065 109692008
# 8 Extended offline Aborted by host 90% 12028 -
# 9 Extended offline Completed: read failure 90% 12028 109692008
#10 Short offline Interrupted (host reset) 80% 12028 -
#11 Short offline Interrupted (host reset) 90% 12028 -
#12 Short offline Completed: read failure 90% 12027 109692008
#13 Short offline Completed: read failure 90% 12027 109692008
#14 Short offline Completed: read failure 70% 12026 109692008
#15 Extended offline Completed: read failure 90% 12025 109692008
#16 Short offline Completed without error 00% 9910 -
#17 Short offline Completed without error 00% 5182 -
#18 Short offline Completed: read failure 90% 4838 91263656
#19 Short offline Completed: read failure 90% 4838 91263656
#20 Short offline Completed without error 00% 4829 -
#21 Short offline Completed without error 00% 4829 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.dois-je ordonner ?
Sect=319687152
for (( I=0; I < 7; I++ )); do
sudo hdparm --yes-i-know-what-i-am-doing --write-sector $(($Sect+$I)) /dev/sda
sleep 5
doneAvec "319687152" au lieu de l'identifiant du précédent secteur et "I < 7" au lieu d'"I < 8" ?
Dernière modification par hyacinthus (Le 06/10/2021, à 14:57)
Hors ligne
#13 Le 06/10/2021, à 14:55
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
C'est la méthode à faire lorsqu'on pense que peu de secteurs sont atteints.
Dans le cas contraire, on essaie d'en établir une liste dans un fichier avec la commande badbocks
Mais cela se fait uniquement pour les partitions formatées en EXT4
L'autre solution étant d'utiliser ddrescue afin d'en avoir la liste pour tout le disque
Dernière modification par geole (Le 06/10/2021, à 15:02)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#14 Le 06/10/2021, à 14:58
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
hyacinthus a écrit :
Disques échoue à nouveau son auto-test court, sans dépasser les 10 %, toutefois, le texte de l'auto-diagnostique est devenu : "le disque est sain, 7 secteurs endommagés" (plutôt que 8 précédemment).
Dois-je modifier la commande
for (( I=0; I < 8; I++ )); dopar
for (( I=0; I < 7; I++ )); doou est-ce sans lien aucun ?
Tu ne modifies pas.
Le secteur physique fait 4096 octets soit exactement 8 secteurs logiques de 512 octets
autant traiter les huit d'un coup
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#15 Le 06/10/2021, à 14:59
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bien compris, merci encore...
Bon, bah je continue sur ma lancée !
Hors ligne
#16 Le 06/10/2021, à 15:04
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
En fait, il faut s'assurer que le secteur indiqué est bien multiple de huit avant de mettre sa valeur
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#17 Le 06/10/2021, à 15:16
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Merci pour la précision !
J'ai revérifié et tous ceux que j'ai traités entre temps sont bien des multiples de huit.
Hors ligne
#18 Le 06/10/2021, à 15:29
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
L'auto-test court est achevé avec succès. Le disque est sain. Je procède à l'auto-test étendu (via l'interface graphique de Disques).
Hors ligne
#19 Le 06/10/2021, à 15:34
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
C'est un bon début.
Je ne connais pas trop si, avec l'interface graphique, en cas de plantage, on peut reprendre à l'endroit planté ou s'il repart du début.
Avec cette commande
sudo smartctl -t select,0-1999999999 /dev/sda On peut le faire repartir du secteur d'arrêt avec cette commande
sudo smartctl -t select,next /dev/sdaDernière modification par geole (Le 06/10/2021, à 15:59)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#20 Le 06/10/2021, à 15:53
- hyacinthus
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Merci beaucoup. L'auto-test étendu a découvert quelques autres secteurs défectueux, puis a échoué.
Je dois partir à présent. Je poursuivrai ce soir ou demain, avec votre commande.
Merci encore, infiniment, pour votre aide Geole.
À bientôt,
Y.
Hors ligne
#21 Le 28/11/2022, à 16:40
- gumen
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bonjour à tous,
Problème similaire pour moi.
Je suis passé sur Ubuntu depuis plus de 5 ans et j'arrivais à me débrouiller jusqu'à présent.
Cependant, en allumant mon ordinateur portable il y a 2 jours, j'ai cru qu'il était définitivement perdu.
Voici ce qu'il m'affichait :
J'ai été obligé de l'éteindre de force en restant appuyé sur Power.
Suite à cela, il se rallume et refonctionne parfaitement, étrange ?
J'ai tout de même effectué toutes les sauvegardes sur un hdd externe.
En procédant aux tests SMART depuis Disques et GSmartControl, les auto-tests Short plantent tous à 20%.
Et malheureusement, je n'ai pas les connaissances pour décrypter les résultats du test.
Voici les informations de l'ordinateur :
- ASUS N56JR acheté sous Windows 8 (et oui..)
- Ubuntu 22.04.1 LTS installé sur SSD Crucial MX300 en 05/2016 suite à un plantage du HDD originel
Merci infiniment pour votre aide
Hors ligne
#22 Le 28/11/2022, à 17:16
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bonjour
Dans un premier temps, installe l'application smartmontools
sudo apt-get install --no-install-recommends smartmontoolset publie l'état du disque SSD
sudo smartctl -s on -a /dev/sdaDernière modification par geole (Le 28/11/2022, à 17:16)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#23 Le 28/11/2022, à 17:28
- gumen
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Bonjour Geole,
Merci beaucoup pour ta réponse.
Voici le rapport de la commande smartctl :
rom@rom-N56JRH:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de rom :
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-53-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: Crucial_CT525MX300SSD1
Serial Number: 1714169BBD72
LU WWN Device Id: 5 00a075 1169bbd72
Firmware Version: M0CR040
User Capacity: 525112713216 bytes [525 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Nov 28 17:27:49 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 120) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 1283) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 7) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 1946
5 Reallocate_NAND_Blk_Cnt 0x0032 092 092 010 Old_age Always - 153
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1496
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1756
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 099 099 000 Old_age Always - 19
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 41
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 1
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 175
194 Temperature_Celsius 0x0022 074 048 000 Old_age Always - 26 (Min/Max 10/52)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 153
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 13
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0030 099 099 001 Old_age Offline - 1
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 6879233407
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 214977766
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 222496732
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1804
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 472
SMART Error Log Version: 1
ATA Error Count: 175 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 175 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 18 9c 58 40 Error: UNC at LBA = 0x00589c18 = 5807128
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 18 9c 58 40 08 12d+15:05:12.704 READ FPDMA QUEUED
61 00 18 60 6b db 40 08 12d+15:05:12.704 WRITE FPDMA QUEUED
47 00 01 30 06 00 e0 08 12d+15:05:12.704 READ LOG DMA EXT
47 00 01 30 00 00 e0 08 12d+15:05:12.704 READ LOG DMA EXT
47 00 01 00 00 00 e0 08 12d+15:05:12.704 READ LOG DMA EXT
Error 174 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 18 9c 58 40 Error: UNC at LBA = 0x00589c18 = 5807128
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 18 9c 58 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 18 58 88 54 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 40 70 68 58 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 20 50 68 58 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 18 40 88 54 40 08 12d+15:05:12.704 READ FPDMA QUEUED
Error 173 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 20 88 5f 40 Error: UNC at LBA = 0x005f8820 = 6260768
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 00 08 60 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 40 20 88 5f 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 20 00 88 5f 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 d0 40 20 08 5f 40 08 12d+15:05:12.704 READ FPDMA QUEUED
60 00 20 00 08 5f 40 08 12d+15:05:12.704 READ FPDMA QUEUED
Error 172 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 18 9c 58 40 Error: UNC at LBA = 0x00589c18 = 5807128
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 18 9c 58 40 08 12d+14:56:12.704 READ FPDMA QUEUED
60 00 08 c0 39 c3 40 08 12d+14:56:12.704 READ FPDMA QUEUED
47 00 01 30 06 00 e0 08 12d+14:56:12.704 READ LOG DMA EXT
47 00 01 30 00 00 e0 08 12d+14:56:12.704 READ LOG DMA EXT
47 00 01 00 00 00 e0 08 12d+14:56:12.704 READ LOG DMA EXT
Error 171 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 18 9c 58 40 Error: UNC at LBA = 0x00589c18 = 5807128
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c0 39 c3 40 08 12d+14:56:12.704 READ FPDMA QUEUED
60 d5 20 18 9c 58 40 08 12d+14:56:12.704 READ FPDMA QUEUED
60 00 08 e8 ee 1e 40 08 12d+14:56:12.704 READ FPDMA QUEUED
60 d5 18 58 88 54 40 08 12d+14:56:12.704 READ FPDMA QUEUED
60 00 08 58 4f 1d 40 08 12d+14:56:12.704 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 80% 1496 14793216
# 2 Short offline Completed: read failure 80% 1495 14793216
# 3 Short offline Completed: read failure 80% 1495 14793216
# 4 Short offline Completed: read failure 80% 1495 14793216
# 5 Short offline Completed: read failure 80% 1495 14793216
# 6 Short offline Completed: read failure 80% 1495 14793216
# 7 Short offline Completed: read failure 80% 1494 14793216
# 8 Conveyance offline Completed: read failure 80% 1494 14793216
# 9 Extended offline Completed: read failure 90% 1494 14793216
#10 Short offline Completed: read failure 80% 1494 14793216
#11 Short offline Completed: read failure 80% 1494 14793216
#12 Short offline Completed: read failure 80% 1494 14793216
#13 Short offline Completed: read failure 80% 1494 14793216
#14 Short offline Completed without error 00% 22 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Merci pour ton retour
Hors ligne
#24 Le 28/11/2022, à 18:06
- geole
Re : Échec de l'autotest (court ou étendu) d'estimation globale du disque
Je connais mal l'interprétation du rapport pour les SSD.
En tout cas, il y a pas mal d'erreurs
5 Reallocate_NAND_Blk_Cnt 0x0032 092 092 010 Old_age Always - 153
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1496
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 41
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1804
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 1
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 175
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 153
Error 175 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)Sur ce type de disque j'ai souvent vu le message de perte de courant électrique "Unexpect_Power_Loss_Ct"
et lorsqu'il perd le courant, il est obligé de totalement refabriquer la référence de ce qui est utilisé. Cela prend du temps.
Tu as raison de prendre des précautions.
Je te rappelle ce qui est écrit
La documentation a écrit :
Utilisation
Il est inutile de tester un SSD car les secteurs testés sont virtuels. Cela ne ferait que l'user de façon prématurée !
Dernière modification par geole (Le 28/11/2022, à 18:10)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne