Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/10/2021, à 17:27

bibitoi74

Un logiciel pour Nimofilm [RESOLU]

Bonjour j' aimerais installer un logiciel pour mon scanner Nimofilm de chez HOMDAY qui tourné sous WINDOWS 7 et je suis sous UBUNTU 16.04 merci d'avance.

Dernière modification par bibitoi74 (Le 18/01/2023, à 17:39)


Longue vie a LINUX.

Hors ligne

#2 Le 13/10/2021, à 07:12

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Le scanner branché que donne

lsusb

Ubuntu 16.04 est obsolète et n'a plus de mise à jour.
Cordialement,
Guy

Hors ligne

#3 Le 13/10/2021, à 07:13

Nasman

Re : Un logiciel pour Nimofilm [RESOLU]

A priori Ubuntu 16.04 n'est plus supporté. Le logiciel qui permettrait (éventuellement) de faire ce que tu souhaites ne sera plus dans les dépôts.
il faudrait - à minima - avoir une version d'ubuntu encore supportée (par exemple la 20.04 LTS).


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne

#4 Le 13/10/2021, à 07:18

xubu1957

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour,

La version 16.04 est supportée jusqu'en avril 2024 en ESM > Extended_Security_Maintenance

Puis-je utiliser ESM pour un usage personnel ?
Oui, les particuliers peuvent accéder à ESM via un abonnement gratuit . L'abonnement gratuit permet jusqu'à 3 machines et jusqu'à 50 pour les membres de la communauté Ubuntu .

> ubuntu.com/blog/ubuntu-16-04-lts-transitions-to-extended-security-maintenance

_ _ _

C'est un Ordi ancien

Dernière modification par xubu1957 (Le 13/10/2021, à 07:21)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 13/10/2021, à 14:31

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour pour Gl38 voici le retour de lsusb

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

bussiere@bussiere-ET2010AG:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 1926:0083 NextWindow 1950 HID Touchscreen
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:5801 Realtek Semiconductor Corp. 
Bus 001 Device 004: ID 1bcf:8001 Sunplus Innovation Technology Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 25a7:fa67  
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
bussiere@bussiere-ET2010AG:~$ 

Longue vie a LINUX.

Hors ligne

#6 Le 13/10/2021, à 14:35

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Merci de votre aide car mon ordi n'est pas tout jeune et je n'ai pas trop envie de réinstaller WINDOWS 7 car compliqué en dual boot sans perdre des fichiers mais si il le faut  pour sauver mes photos ?

Dernière modification par bibitoi74 (Le 13/10/2021, à 14:37)


Longue vie a LINUX.

Hors ligne

#7 Le 13/10/2021, à 15:07

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Je ne vois pas de ligne dans le résultat de lsusb qui pourrait correspondre au scanner.
Pourrais-tu le débrancher, attendre une minute puis le rebrancher, attendre une minute et donner les dernières lignes de la commande

dmesg

Cordialement,
Guy

Hors ligne

#8 Le 13/10/2021, à 17:05

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

voici le retyour

[    3.478354] usb usb3: Product: OHCI PCI host controller
[    3.478357] usb usb3: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[    3.478360] usb usb3: SerialNumber: 0000:00:12.0
[    3.478573] hub 3-0:1.0: USB hub found
[    3.478586] hub 3-0:1.0: 3 ports detected
[    3.478970] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    3.478979] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    3.479007] ohci-pci 0000:00:12.1: irq 16, io mem 0xf2207000
[    3.538341] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.538347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.538351] usb usb4: Product: OHCI PCI host controller
[    3.538354] usb usb4: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[    3.538357] usb usb4: SerialNumber: 0000:00:12.1
[    3.538565] hub 4-0:1.0: USB hub found
[    3.538581] hub 4-0:1.0: 3 ports detected
[    3.538972] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.538980] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    3.539026] ohci-pci 0000:00:13.0: irq 18, io mem 0xf2206000
[    3.598350] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.598356] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.598359] usb usb5: Product: OHCI PCI host controller
[    3.598363] usb usb5: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[    3.598366] usb usb5: SerialNumber: 0000:00:13.0
[    3.598587] hub 5-0:1.0: USB hub found
[    3.598600] hub 5-0:1.0: 3 ports detected
[    3.599040] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    3.599048] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    3.599083] ohci-pci 0000:00:13.1: irq 18, io mem 0xf2205000
[    3.658348] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.658354] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.658358] usb usb6: Product: OHCI PCI host controller
[    3.658361] usb usb6: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[    3.658364] usb usb6: SerialNumber: 0000:00:13.1
[    3.658583] hub 6-0:1.0: USB hub found
[    3.658599] hub 6-0:1.0: 3 ports detected
[    3.659003] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.659012] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    3.659040] ohci-pci 0000:00:14.5: irq 18, io mem 0xf2204000
[    3.699112] isapnp: No Plug & Play device found
[    3.718433] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.718445] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.718453] usb usb7: Product: OHCI PCI host controller
[    3.718459] usb usb7: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[    3.718465] usb usb7: SerialNumber: 0000:00:14.5
[    3.718921] hub 7-0:1.0: USB hub found
[    3.718949] hub 7-0:1.0: 2 ports detected
[    3.719264] ohci-platform: OHCI generic platform driver
[    3.719300] uhci_hcd: USB Universal Host Controller Interface driver
[    3.719495] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    3.719500] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.723543] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.723994] mousedev: PS/2 mouse device common for all mice
[    3.724580] rtc_cmos 00:01: RTC can wake from S4
[    3.724893] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.724957] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[    3.724985] i2c /dev entries driver
[    3.725146] device-mapper: uevent: version 1.0.3
[    3.725437] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.725531] platform eisa.0: Probing EISA bus 0
[    3.725539] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.725547] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.725553] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.725560] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.725566] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.725573] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.725579] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.725586] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.725592] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.725598] platform eisa.0: EISA: Detected 0 cards
[    3.725647] cpufreq-nforce2: No nForce2 chipset.
[    3.725671] ledtrig-cpu: registered to indicate activity on CPUs
[    3.726504] NET: Registered protocol family 10
[    3.727116] NET: Registered protocol family 17
[    3.727148] Key type dns_resolver registered
[    3.727818] microcode: CPU0: patch_level=0x010000c7
[    3.727836] microcode: CPU1: patch_level=0x010000c7
[    3.728013] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.728051] Using IPI No-Shortcut mode
[    3.728814] registered taskstats version 1
[    3.728875] Loading compiled-in X.509 certificates
[    3.738566] Loaded X.509 cert 'Build time autogenerated kernel key: 20ac0ed02049a72ce76c079ea50dd43d3ac5969c'
[    3.738616] zswap: loaded using pool lzo/zbud
[    3.743450] Key type trusted registered
[    3.746443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    3.752022] Key type encrypted registered
[    3.752038] AppArmor: AppArmor sha1 policy hashing enabled
[    3.752045] ima: No TPM chip found, activating TPM-bypass!
[    3.752064] ima: Allocated hash algorithm: sha1
[    3.752095] evm: HMAC attrs: 0x1
[    3.752601]   Magic number: 9:873:672
[    3.752791] rtc_cmos 00:01: setting system clock to 2021-10-13 07:40:33 UTC (1634110833)
[    3.753123] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.753322] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.753324] EDD information not available.
[    3.753441] PM: Hibernation image not present or could not be loaded.
[    3.753887] Freeing unused kernel memory: 944K
[    3.762469] Write protecting the kernel text: 8156k
[    3.762543] Write protecting the kernel read-only data: 3220k
[    3.762546] NX-protecting the kernel data: 6180k
[    3.785262] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.785397] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.786223] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809067] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809169] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809343] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809472] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809575] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809687] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.809799] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    3.874298] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    3.888614] wmi: Mapper loaded
[    3.900640] sdhci: Secure Digital Host Controller Interface driver
[    3.900645] sdhci: Copyright(c) Pierre Ossman
[    3.909579] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 80)
[    3.909723] sdhci-pci 0000:08:00.0: No vmmc regulator found
[    3.909727] sdhci-pci 0000:08:00.0: No vqmmc regulator found
[    3.911833] ahci 0000:00:11.0: version 3.0
[    3.912188] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x9 impl SATA mode
[    3.912196] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    3.912993] scsi host0: ahci
[    3.913142] scsi host1: ahci
[    3.913269] scsi host2: ahci
[    3.913392] scsi host3: ahci
[    3.913476] ata1: SATA max UDMA/133 abar m1024@0xf2209000 port 0xf2209100 irq 27
[    3.913479] ata2: DUMMY
[    3.913481] ata3: DUMMY
[    3.913485] ata4: SATA max UDMA/133 abar m1024@0xf2209000 port 0xf2209280 irq 27
[    3.919758] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA
[    3.919786] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 80)
[    3.919892] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.
[    3.938726] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.939728] jme 0000:08:00.5 eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:70:5a:b6:e6:08:0e
[    3.958322] scsi host4: pata_atiixp
[    3.965653] scsi host5: pata_atiixp
[    3.965764] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14
[    3.965769] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15
[    3.966105] [drm] Initialized drm 1.1.0 20060810
[    3.990297] usb 3-3: new full-speed USB device number 2 using ohci-pci
[    3.997002] jme 0000:08:00.5 enp8s0f5: renamed from eth0
[    3.998293] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    4.130100] [drm] radeon kernel modesetting enabled.
[    4.130207] checking generic (e0000000 3d0000) vs hw (e0000000 10000000)
[    4.130210] fb: switching to radeondrmfb from VESA VGA
[    4.130253] Console: switching to colour dummy device 80x25
[    4.131122] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1043:0x8430).
[    4.131139] [drm] register mmio base: 0xF2100000
[    4.131141] [drm] register mmio size: 131072
[    4.132558] ATOM BIOS: PARK
[    4.132627] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    4.132632] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    4.132638] [drm] Detected VRAM RAM=512M, BAR=256M
[    4.132641] [drm] RAM width 64bits DDR
[    4.132793] [TTM] Zone  kernel: Available graphics memory: 428880 kiB
[    4.132799] [TTM] Zone highmem: Available graphics memory: 2066916 kiB
[    4.132801] [TTM] Initializing pool allocator
[    4.132810] [TTM] Initializing DMA pool allocator
[    4.132855] [drm] radeon: 512M of VRAM memory ready
[    4.132857] [drm] radeon: 1024M of GTT memory ready.
[    4.132880] [drm] Loading CEDAR Microcode
[    4.133016] [drm] Internal thermal controller with fan control
[    4.160546] [drm] radeon: dpm initialized
[    4.160682] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    4.162197] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    4.165397] usb 6-2: New USB device found, idVendor=1926, idProduct=0083
[    4.165404] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.165407] usb 6-2: Product: Touchscreen
[    4.165411] usb 6-2: Manufacturer: NextWindow
[    4.181422] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[    4.181569] radeon 0000:01:00.0: WB enabled
[    4.181575] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc0bc00
[    4.181580] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc0bc0c
[    4.182968] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xf8e1c418
[    4.182971] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.182973] [drm] Driver supports precise vblank timestamp query.
[    4.182976] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    4.183020] radeon 0000:01:00.0: radeon: using MSI.
[    4.183052] [drm] radeon: irq initialized.
[    4.186090] hidraw: raw HID events driver (C) Jiri Kosina
[    4.198155] usbcore: registered new interface driver usbhid
[    4.198160] usbhid: USB HID core driver
[    4.199250] [drm] ring test on 0 succeeded in 1 usecs
[    4.199258] [drm] ring test on 3 succeeded in 2 usecs
[    4.206453] hid-generic 0003:1926:0083.0001: hiddev0,hidraw0: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:13.1-2/input1
[    4.385078] [drm] ring test on 5 succeeded in 1 usecs
[    4.385088] [drm] UVD initialized successfully.
[    4.385093] tsc: Refined TSC clocksource calibration: 1595.947 MHz
[    4.385099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1701304fc98, max_idle_ns: 440795269188 ns
[    4.385343] [drm] ib test on ring 0 succeeded in 0 usecs
[    4.385413] [drm] ib test on ring 3 succeeded in 0 usecs
[    4.393398] usb 3-3: New USB device found, idVendor=25a7, idProduct=fa67
[    4.393405] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.393409] usb 3-3: Product: 2.4G Receiver
[    4.393412] usb 3-3: Manufacturer: CX
[    4.399932] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:25A7:FA67.0002/input/input3
[    4.402352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.410353] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.412951] ata4.00: ATAPI: HL-DT-STDVDRAM GT32N, AS01, max UDMA/100
[    4.415952] ata4.00: configured for UDMA/100
[    4.429326] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133
[    4.429333] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.454506] hid-generic 0003:25A7:FA67.0002: input,hidraw1: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:12.0-3/input0
[    4.460645] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:25A7:FA67.0003/input/input4
[    4.468809] ata1.00: configured for UDMA/133
[    4.469015] scsi 0:0:0:0: Direct-Access     ATA      ST3500418AS      CC44 PQ: 0 ANSI: 5
[    4.469753] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.469820] sd 0:0:0:0: [sda] Write Protect is off
[    4.469825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.469854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.470141] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.473623] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT32N     AS01 PQ: 0 ANSI: 5
[    4.489658] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.489665] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.490263] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.490412] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    4.508841]  sda: sda1 sda2 < sda5 >
[    4.509354] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.514663] hid-generic 0003:25A7:FA67.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:12.0-3/input1
[    4.555392] [drm] ib test on ring 5 succeeded
[    4.556545] [drm] Radeon Display Connectors
[    4.556548] [drm] Connector 0:
[    4.556551] [drm]   DVI-I-1
[    4.556553] [drm]   HPD1
[    4.556557] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    4.556558] [drm]   Encoders:
[    4.556561] [drm]     DFP1: INTERNAL_UNIPHY1
[    4.601421] [drm] fb mappable at 0xE045F000
[    4.601424] [drm] vram apper at 0xE0000000
[    4.601426] [drm] size 5787648
[    4.601428] [drm] fb depth is 24
[    4.601430] [drm]    pitch is 6400
[    4.601557] fbcon: radeondrmfb (fb0) is primary device
[    4.601688] Console: switching to colour frame buffer device 200x56
[    4.601769] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    4.610461] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    4.698374] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    5.382522] clocksource: Switched to clocksource tsc
[    6.258361] usb 1-6: New USB device found, idVendor=0bda, idProduct=5801
[    6.258368] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    6.258372] usb 1-6: Product: USB Camera
[    6.258376] usb 1-6: Manufacturer: Generic
[    6.258379] usb 1-6: SerialNumber: 200901010001
[    6.641557] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.593813] random: nonblocking pool is initialized
[    7.767785] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    7.767985] systemd[1]: Detected architecture x86.
[    7.771468] systemd[1]: Set hostname to <bussiere-ET2010AG>.
[    9.640241] systemd[1]: Listening on udev Control Socket.
[    9.640361] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.640435] systemd[1]: Listening on Journal Socket.
[    9.640490] systemd[1]: Listening on udev Kernel Socket.
[    9.640645] systemd[1]: Created slice System Slice.
[    9.650892] systemd[1]: Mounting POSIX Message Queue File System...
[    9.651800] systemd[1]: Starting Nameserver information manager...
[    9.652488] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.653524] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.655714] systemd[1]: Started Braille Device Support.
[    9.657390] systemd[1]: Listening on Journal Audit Socket.
[    9.657428] systemd[1]: Reached target Encrypted Volumes.
[    9.657530] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.658299] systemd[1]: Starting Uncomplicated firewall...
[    9.659129] systemd[1]: Mounting Debug File System...
[    9.659184] systemd[1]: Reached target User and Group Name Lookups.
[    9.659896] systemd[1]: Started Read required files in advance.
[    9.660112] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.660254] systemd[1]: Created slice User and Session Slice.
[    9.660280] systemd[1]: Reached target Slices.
[    9.660542] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.882926] systemd[1]: Mounting Huge Pages File System...
[    9.883062] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.883144] systemd[1]: Listening on Syslog Socket.
[    9.883964] systemd[1]: Starting Set console keymap...
[    9.892796] systemd[1]: Starting Load Kernel Modules...
[    9.892911] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    9.893656] systemd[1]: Starting Journal Service...
[    9.893691] systemd[1]: Reached target Remote File Systems (Pre).
[    9.893729] systemd[1]: Reached target Remote File Systems.
[    9.896210] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.897739] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.929064] systemd[1]: Started Uncomplicated firewall.
[   10.138452] systemd[1]: Mounted POSIX Message Queue File System.
[   10.138504] systemd[1]: Mounted Huge Pages File System.
[   10.138534] systemd[1]: Mounted Debug File System.
[   10.196322] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.197793] systemd[1]: Started Remount Root and Kernel File Systems.
[   10.371078] systemd[1]: Starting udev Coldplug all Devices...
[   10.371911] systemd[1]: Starting Load/Save Random Seed...
[   10.523171] systemd[1]: Started Nameserver information manager.
[   10.524185] systemd[1]: Reached target Network (Pre).
[   10.541517] systemd[1]: Started Journal Service.
[   10.820134] systemd-journald[224]: Received request to flush runtime journal from PID 1
[   11.005852] lp: driver loaded but no devices found
[   11.023109] ppdev: user-space parallel port driver
[   14.696747] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.726147] ATK0110 ATK0110:00: No usable hwmon interface detected
[   15.677768] EDAC MC: Ver: 3.0.0
[   15.688496] MCE: In-kernel MCE decoding enabled.
[   15.698680] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   15.698980] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   15.706482] AMD64 EDAC driver v3.4.0
[   15.706523] EDAC amd64: DRAM ECC disabled.
[   15.706537] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   15.775791] audit: type=1400 audit(1634110845.517:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=434 comm="apparmor_parser"
[   15.775805] audit: type=1400 audit(1634110845.517:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=434 comm="apparmor_parser"
[   15.775814] audit: type=1400 audit(1634110845.517:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=434 comm="apparmor_parser"
[   15.775822] audit: type=1400 audit(1634110845.517:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=434 comm="apparmor_parser"
[   16.128141] audit: type=1400 audit(1634110845.869:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=433 comm="apparmor_parser"
[   16.128156] audit: type=1400 audit(1634110845.869:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=433 comm="apparmor_parser"
[   16.148224] audit: type=1400 audit(1634110845.889:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=520 comm="apparmor_parser"
[   16.160218] audit: type=1400 audit(1634110845.901:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=559 comm="apparmor_parser"
[   16.275275] kvm: Nested Virtualization enabled
[   16.275282] kvm: Nested Paging enabled
[   16.335670] audit: type=1400 audit(1634110846.077:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=555 comm="apparmor_parser"
[   16.335686] audit: type=1400 audit(1634110846.077:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=555 comm="apparmor_parser"
[   16.372566] ath: phy0: Enable LNA combining
[   16.374016] ath: EEPROM regdomain: 0x60
[   16.374019] ath: EEPROM indicates we should expect a direct regpair map
[   16.374023] ath: Country alpha2 being used: 00
[   16.374025] ath: Regpair used: 0x60
[   16.463761] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.464331] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8920000, irq=18
[   16.467169] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   16.497864] media: Linux media interface: v0.10
[   17.022159] Linux video capture interface: v2.00
[   17.024196] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B2X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   17.024204] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.024209] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   17.024213] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   17.024216] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   17.024220] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x18
[   17.024224] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   17.039916] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   17.040047] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   17.272028] asus_wmi: ASUS WMI generic driver loaded
[   17.281402] asus_wmi: Initialization: 0x0
[   17.281451] asus_wmi: BIOS WMI version: 0.0
[   17.281492] asus_wmi: SFUN value: 0x0
[   17.282149] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[   17.282268] asus_wmi: Number of fans: 1
[   17.779202] cfg80211: World regulatory domain updated:
[   17.779210] cfg80211:  DFS Master region: unset
[   17.779213] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.779217] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.779222] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.779225] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.779229] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.779233] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   17.779237] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.779240] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.779243] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.891990] uvcvideo: Found UVC 1.00 device USB Camera (0bda:5801)
[   17.910582] input: USB Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input8
[   17.910923] usbcore: registered new interface driver uvcvideo
[   17.910928] USB Video Class driver (1.1.1)
[   20.045203] Adding 4187132k swap on /dev/sda5.  Priority:-1 extents:1 across:4187132k FS
[   27.954651] IPv6: ADDRCONF(NETDEV_UP): enp8s0f5: link is not ready
[   27.980967] jme 0000:08:00.5 enp8s0f5: Link is down
[   27.981063] IPv6: ADDRCONF(NETDEV_UP): enp8s0f5: link is not ready
[   27.994015] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.007710] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   32.843918] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   34.281861] Non-volatile memory driver v1.3
[   34.797347] wlp2s0: authenticate with ac:3b:77:84:36:f0
[   34.820299] wlp2s0: send auth to ac:3b:77:84:36:f0 (try 1/3)
[   34.822209] wlp2s0: authenticated
[   34.824902] wlp2s0: associate with ac:3b:77:84:36:f0 (try 1/3)
[   34.835508] wlp2s0: RX AssocResp from ac:3b:77:84:36:f0 (capab=0x411 status=0 aid=5)
[   34.835606] wlp2s0: associated
[   34.835667] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[20864.132308] usb 1-5: new high-speed USB device number 4 using ehci-pci
[20864.338423] usb 1-5: New USB device found, idVendor=1bcf, idProduct=8001
[20864.338437] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20864.338446] usb 1-5: Product: SPCA2080 PC Camera 
[20864.338453] usb 1-5: Manufacturer: Sunplus IT Co 
[20864.506859] uvcvideo: Found UVC 1.00 device SPCA2080 PC Camera  (1bcf:8001)
[20864.524881] input: SPCA2080 PC Camera  as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input9
[30032.544221] usb 1-5: USB disconnect, device number 4
[30172.818284] usb 1-5: new high-speed USB device number 5 using ehci-pci
[30173.024465] usb 1-5: New USB device found, idVendor=1bcf, idProduct=8001
[30173.024479] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30173.024487] usb 1-5: Product: SPCA2080 PC Camera 
[30173.024495] usb 1-5: Manufacturer: Sunplus IT Co 
[30173.193051] uvcvideo: Found UVC 1.00 device SPCA2080 PC Camera  (1bcf:8001)
[30173.211208] input: SPCA2080 PC Camera  as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input10
bussiere@bussiere-ET2010AG:~$ 

Longue vie a LINUX.

Hors ligne

#9 Le 14/10/2021, à 05:58

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

C'est bizarre : Sunplus IT Co n'a pas l'air de fabriquer des scanners, ils font plutôt des cameras.
Google donne une seule référence pour un scanner aux identifiants usb 1bcf:8001, c'est en danois et les gens n'ont pas réussi à le faire fonctionner.
Tu devrais avoir un CD avec un programme pour Windows, est-ce que le programme se lance avec wine ?
Cordialement,
Guy

Hors ligne

#10 Le 14/10/2021, à 13:30

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour j'ai installé wine par le terminal mais impossible de le trouver dans les programmes


Longue vie a LINUX.

Hors ligne

#11 Le 14/10/2021, à 17:32

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Et si dans un terminal tu tapes

wine

ça donne quoi ?
Cordialement,
Guy

Hors ligne

#12 Le 15/10/2021, à 10:03

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour retour de Wine

bussiere@bussiere-ET2010AG:~$ Wine
La commande « Wine » est introuvable, vouliez-vous dire :
 La commande « xine » du paquet « xine-ui » (universe)
 La commande « wine » du paquet « wine1.6-i386 » (universe)
 La commande « line » du paquet « util-linux » (main)
Wine : commande introuvable
bussiere@bussiere-ET2010AG:~$ 

Longue vie a LINUX.

Hors ligne

#13 Le 15/10/2021, à 10:10

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Wine et wine ce n'est pas pareil !

Hors ligne

#14 Le 15/10/2021, à 10:45

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Il y a t'il une ligne de commande pour installer wine je n'arrive pas a trouver
Exemple
Install Wine 2.0 (Staging) via official Wine PPA:

The official Wine PPA offers Wine-staging packages that are kinda different to the distro packages.

Wine Staging provides extra features and fixes, but it’s installed to /opt/wine-staging. Thanks to this, you can have both regular Wine version and Wine-Staging in single system.

1. To add the PPA, open terminal (Ctrl+Alt+T) and run the command:

sudo add-apt-repository ppa:wine/wine-builds

For 64-bit system, enable 32-bit architecture (if you haven’t already) via sudo dpkg --add-architecture i386

official-wine-ppa-xenial

2. Then updates and install Wine 2.0 staging via commands:

sudo apt-get update

sudo apt-get install --install-recommends wine-staging

To use Wine-Staging, simply add “/opt/wine-staging/bin/” in the fond of executable, for example:

/opt/wine-staging/bin/wine

/opt/wine-staging/bin/winecfg

For more, see the Wine-Staging usage.
Ça ne fonctionne pas!

Ou
En ordre pour le "wine debian" :
su
dpkg --add-architecture i386
apt-get update
apt-get install wine


Longue vie a LINUX.

Hors ligne

#15 Le 15/10/2021, à 10:47

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Le retour avec wine

bussiere@bussiere-ET2010AG:~$ wine
Usage: wine PROGRAM [ARGUMENTS...]   Run the specified program
       wine --help                   Display this help and exit
       wine --version                Output version information and exit
bussiere@bussiere-ET2010AG:~$ 

Longue vie a LINUX.

Hors ligne

#16 Le 15/10/2021, à 11:00

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Donc wine est installé.
Où est le programme du CD pour windows ? Il faut le nom complet avec son chemin, genre
/media/bussiere/nom_du_cd/programme.exe

Ensuite il faut lancer dans un terminal

wine /media/bussiere/nom_du_cd/programme.exe

En faisant gaffe aux majuscules !

Cordialement,
Guy

Hors ligne

#17 Le 15/10/2021, à 13:02

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour mais ça je ne comprend pas [Où est le programme du CD pour windows ? Il faut le nom complet avec son chemin, genre
/media/bussiere/nom_du_cd/programme.exe] quel CD Windows?


Longue vie a LINUX.

Hors ligne

#18 Le 15/10/2021, à 14:40

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Que contient le CD ?

Hors ligne

#19 Le 15/10/2021, à 17:59

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

/home/bussiere/Bureau/Screenshot at 2021-10-15 18:58:35.png


Longue vie a LINUX.

Hors ligne

#20 Le 15/10/2021, à 18:13

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Comment tu veux qu'on voit une image qui est sur ton ordinateur ?
C'est quand même possible d'avoir la liste des fichiers de ce CD dans un terminal et de l'afficher ici sans utiliser d'image.
Où as-tu trouvé ton scanner ?
Cordialement,
Guy

Hors ligne

#21 Le 15/10/2021, à 18:22

xubu1957

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour,

Voir > [Tuto] Poster une image


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#22 Le 15/10/2021, à 18:27

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Merci mais comment je peu  donner mes données du disque


Longue vie a LINUX.

Hors ligne

#23 Le 15/10/2021, à 19:31

gl38

Re : Un logiciel pour Nimofilm [RESOLU]

Tu ouvres un terminal et tu tapes

cd /media/bussiere

puis

ls -l

tu dois voir le nom du CD, tu vas dedans avec un cd
et tu retapes

ls -l

et tu nous le résultat.
Cordialement,
Guy

Hors ligne

#24 Le 16/10/2021, à 10:09

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Bonjour je n'arrive pas a rentrer dans le CD comment il faut faire ?

bussiere@bussiere-ET2010AG:~$ cd /media/bussiere
bussiere@bussiere-ET2010AG:/media/bussiere$ ls -l
total 2
dr-x------ 1 bussiere bussiere 2048 nov.  13  2017 ELM327 software
bussiere@bussiere-ET2010AG:/media/bussiere$ ls -l
total 2
dr-x------ 1 bussiere bussiere 2048 nov.  13  2017 ELM327 software
bussiere@bussiere-ET2010AG:/media/bussiere$ 

Longue vie a LINUX.

Hors ligne

#25 Le 16/10/2021, à 10:31

bibitoi74

Re : Un logiciel pour Nimofilm [RESOLU]

Avec capture d’écran

https://pix.cyber-nux.fr/?img=1634376623.png

Dernière modification par bibitoi74 (Le 16/10/2021, à 10:32)


Longue vie a LINUX.

Hors ligne