#1 Le 12/10/2021, à 17:27
- bibitoi74
Un logiciel pour Nimofilm [RESOLU]
Bonjour j' aimerais installer un logiciel pour mon scanner Nimofilm de chez HOMDAY qui tourné sous WINDOWS 7 et je suis sous UBUNTU 16.04 merci d'avance.
Dernière modification par bibitoi74 (Le 18/01/2023, à 17:39)
Longue vie a LINUX.
Hors ligne
#2 Le 13/10/2021, à 07:12
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Le scanner branché que donne
lsusb
Ubuntu 16.04 est obsolète et n'a plus de mise à jour.
Cordialement,
Guy
Hors ligne
#3 Le 13/10/2021, à 07:13
- Nasman
Re : Un logiciel pour Nimofilm [RESOLU]
A priori Ubuntu 16.04 n'est plus supporté. Le logiciel qui permettrait (éventuellement) de faire ce que tu souhaites ne sera plus dans les dépôts.
il faudrait - à minima - avoir une version d'ubuntu encore supportée (par exemple la 20.04 LTS).
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#4 Le 13/10/2021, à 07:18
- xubu1957
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour,
La version 16.04 est supportée jusqu'en avril 2024 en ESM > Extended_Security_Maintenance
Puis-je utiliser ESM pour un usage personnel ?
Oui, les particuliers peuvent accéder à ESM via un abonnement gratuit . L'abonnement gratuit permet jusqu'à 3 machines et jusqu'à 50 pour les membres de la communauté Ubuntu .
> ubuntu.com/blog/ubuntu-16-04-lts-transitions-to-extended-security-maintenance
_ _ _
C'est un Ordi ancien
Dernière modification par xubu1957 (Le 13/10/2021, à 07:21)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#5 Le 13/10/2021, à 14:31
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour pour Gl38 voici le retour de lsusb
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
bussiere@bussiere-ET2010AG:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 1926:0083 NextWindow 1950 HID Touchscreen
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:5801 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 1bcf:8001 Sunplus Innovation Technology Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 25a7:fa67
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
bussiere@bussiere-ET2010AG:~$
Longue vie a LINUX.
Hors ligne
#6 Le 13/10/2021, à 14:35
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Merci de votre aide car mon ordi n'est pas tout jeune et je n'ai pas trop envie de réinstaller WINDOWS 7 car compliqué en dual boot sans perdre des fichiers mais si il le faut pour sauver mes photos ?
Dernière modification par bibitoi74 (Le 13/10/2021, à 14:37)
Longue vie a LINUX.
Hors ligne
#7 Le 13/10/2021, à 15:07
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Je ne vois pas de ligne dans le résultat de lsusb qui pourrait correspondre au scanner.
Pourrais-tu le débrancher, attendre une minute puis le rebrancher, attendre une minute et donner les dernières lignes de la commande
dmesg
Cordialement,
Guy
Hors ligne
#8 Le 13/10/2021, à 17:05
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
voici le retyour
[ 3.478354] usb usb3: Product: OHCI PCI host controller
[ 3.478357] usb usb3: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[ 3.478360] usb usb3: SerialNumber: 0000:00:12.0
[ 3.478573] hub 3-0:1.0: USB hub found
[ 3.478586] hub 3-0:1.0: 3 ports detected
[ 3.478970] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 3.478979] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 3.479007] ohci-pci 0000:00:12.1: irq 16, io mem 0xf2207000
[ 3.538341] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.538347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.538351] usb usb4: Product: OHCI PCI host controller
[ 3.538354] usb usb4: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[ 3.538357] usb usb4: SerialNumber: 0000:00:12.1
[ 3.538565] hub 4-0:1.0: USB hub found
[ 3.538581] hub 4-0:1.0: 3 ports detected
[ 3.538972] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.538980] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.539026] ohci-pci 0000:00:13.0: irq 18, io mem 0xf2206000
[ 3.598350] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.598356] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.598359] usb usb5: Product: OHCI PCI host controller
[ 3.598363] usb usb5: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[ 3.598366] usb usb5: SerialNumber: 0000:00:13.0
[ 3.598587] hub 5-0:1.0: USB hub found
[ 3.598600] hub 5-0:1.0: 3 ports detected
[ 3.599040] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 3.599048] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 3.599083] ohci-pci 0000:00:13.1: irq 18, io mem 0xf2205000
[ 3.658348] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.658354] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.658358] usb usb6: Product: OHCI PCI host controller
[ 3.658361] usb usb6: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[ 3.658364] usb usb6: SerialNumber: 0000:00:13.1
[ 3.658583] hub 6-0:1.0: USB hub found
[ 3.658599] hub 6-0:1.0: 3 ports detected
[ 3.659003] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.659012] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 3.659040] ohci-pci 0000:00:14.5: irq 18, io mem 0xf2204000
[ 3.699112] isapnp: No Plug & Play device found
[ 3.718433] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.718445] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.718453] usb usb7: Product: OHCI PCI host controller
[ 3.718459] usb usb7: Manufacturer: Linux 4.4.0-210-generic ohci_hcd
[ 3.718465] usb usb7: SerialNumber: 0000:00:14.5
[ 3.718921] hub 7-0:1.0: USB hub found
[ 3.718949] hub 7-0:1.0: 2 ports detected
[ 3.719264] ohci-platform: OHCI generic platform driver
[ 3.719300] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.719495] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 3.719500] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.723543] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.723994] mousedev: PS/2 mouse device common for all mice
[ 3.724580] rtc_cmos 00:01: RTC can wake from S4
[ 3.724893] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.724957] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.724985] i2c /dev entries driver
[ 3.725146] device-mapper: uevent: version 1.0.3
[ 3.725437] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 3.725531] platform eisa.0: Probing EISA bus 0
[ 3.725539] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.725547] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.725553] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.725560] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.725566] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.725573] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.725579] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.725586] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.725592] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.725598] platform eisa.0: EISA: Detected 0 cards
[ 3.725647] cpufreq-nforce2: No nForce2 chipset.
[ 3.725671] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.726504] NET: Registered protocol family 10
[ 3.727116] NET: Registered protocol family 17
[ 3.727148] Key type dns_resolver registered
[ 3.727818] microcode: CPU0: patch_level=0x010000c7
[ 3.727836] microcode: CPU1: patch_level=0x010000c7
[ 3.728013] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.728051] Using IPI No-Shortcut mode
[ 3.728814] registered taskstats version 1
[ 3.728875] Loading compiled-in X.509 certificates
[ 3.738566] Loaded X.509 cert 'Build time autogenerated kernel key: 20ac0ed02049a72ce76c079ea50dd43d3ac5969c'
[ 3.738616] zswap: loaded using pool lzo/zbud
[ 3.743450] Key type trusted registered
[ 3.746443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.752022] Key type encrypted registered
[ 3.752038] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.752045] ima: No TPM chip found, activating TPM-bypass!
[ 3.752064] ima: Allocated hash algorithm: sha1
[ 3.752095] evm: HMAC attrs: 0x1
[ 3.752601] Magic number: 9:873:672
[ 3.752791] rtc_cmos 00:01: setting system clock to 2021-10-13 07:40:33 UTC (1634110833)
[ 3.753123] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.753322] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.753324] EDD information not available.
[ 3.753441] PM: Hibernation image not present or could not be loaded.
[ 3.753887] Freeing unused kernel memory: 944K
[ 3.762469] Write protecting the kernel text: 8156k
[ 3.762543] Write protecting the kernel read-only data: 3220k
[ 3.762546] NX-protecting the kernel data: 6180k
[ 3.785262] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.785397] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.786223] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809067] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809169] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809343] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809472] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809575] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809687] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.809799] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 3.874298] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.888614] wmi: Mapper loaded
[ 3.900640] sdhci: Secure Digital Host Controller Interface driver
[ 3.900645] sdhci: Copyright(c) Pierre Ossman
[ 3.909579] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 80)
[ 3.909723] sdhci-pci 0000:08:00.0: No vmmc regulator found
[ 3.909727] sdhci-pci 0000:08:00.0: No vqmmc regulator found
[ 3.911833] ahci 0000:00:11.0: version 3.0
[ 3.912188] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x9 impl SATA mode
[ 3.912196] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 3.912993] scsi host0: ahci
[ 3.913142] scsi host1: ahci
[ 3.913269] scsi host2: ahci
[ 3.913392] scsi host3: ahci
[ 3.913476] ata1: SATA max UDMA/133 abar m1024@0xf2209000 port 0xf2209100 irq 27
[ 3.913479] ata2: DUMMY
[ 3.913481] ata3: DUMMY
[ 3.913485] ata4: SATA max UDMA/133 abar m1024@0xf2209000 port 0xf2209280 irq 27
[ 3.919758] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA
[ 3.919786] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 80)
[ 3.919892] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.
[ 3.938726] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 3.939728] jme 0000:08:00.5 eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:70:5a:b6:e6:08:0e
[ 3.958322] scsi host4: pata_atiixp
[ 3.965653] scsi host5: pata_atiixp
[ 3.965764] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14
[ 3.965769] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15
[ 3.966105] [drm] Initialized drm 1.1.0 20060810
[ 3.990297] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 3.997002] jme 0000:08:00.5 enp8s0f5: renamed from eth0
[ 3.998293] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 4.130100] [drm] radeon kernel modesetting enabled.
[ 4.130207] checking generic (e0000000 3d0000) vs hw (e0000000 10000000)
[ 4.130210] fb: switching to radeondrmfb from VESA VGA
[ 4.130253] Console: switching to colour dummy device 80x25
[ 4.131122] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1043:0x8430).
[ 4.131139] [drm] register mmio base: 0xF2100000
[ 4.131141] [drm] register mmio size: 131072
[ 4.132558] ATOM BIOS: PARK
[ 4.132627] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.132632] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 4.132638] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.132641] [drm] RAM width 64bits DDR
[ 4.132793] [TTM] Zone kernel: Available graphics memory: 428880 kiB
[ 4.132799] [TTM] Zone highmem: Available graphics memory: 2066916 kiB
[ 4.132801] [TTM] Initializing pool allocator
[ 4.132810] [TTM] Initializing DMA pool allocator
[ 4.132855] [drm] radeon: 512M of VRAM memory ready
[ 4.132857] [drm] radeon: 1024M of GTT memory ready.
[ 4.132880] [drm] Loading CEDAR Microcode
[ 4.133016] [drm] Internal thermal controller with fan control
[ 4.160546] [drm] radeon: dpm initialized
[ 4.160682] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.162197] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 4.165397] usb 6-2: New USB device found, idVendor=1926, idProduct=0083
[ 4.165404] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.165407] usb 6-2: Product: Touchscreen
[ 4.165411] usb 6-2: Manufacturer: NextWindow
[ 4.181422] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[ 4.181569] radeon 0000:01:00.0: WB enabled
[ 4.181575] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc0bc00
[ 4.181580] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc0bc0c
[ 4.182968] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xf8e1c418
[ 4.182971] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.182973] [drm] Driver supports precise vblank timestamp query.
[ 4.182976] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 4.183020] radeon 0000:01:00.0: radeon: using MSI.
[ 4.183052] [drm] radeon: irq initialized.
[ 4.186090] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.198155] usbcore: registered new interface driver usbhid
[ 4.198160] usbhid: USB HID core driver
[ 4.199250] [drm] ring test on 0 succeeded in 1 usecs
[ 4.199258] [drm] ring test on 3 succeeded in 2 usecs
[ 4.206453] hid-generic 0003:1926:0083.0001: hiddev0,hidraw0: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:13.1-2/input1
[ 4.385078] [drm] ring test on 5 succeeded in 1 usecs
[ 4.385088] [drm] UVD initialized successfully.
[ 4.385093] tsc: Refined TSC clocksource calibration: 1595.947 MHz
[ 4.385099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1701304fc98, max_idle_ns: 440795269188 ns
[ 4.385343] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.385413] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.393398] usb 3-3: New USB device found, idVendor=25a7, idProduct=fa67
[ 4.393405] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.393409] usb 3-3: Product: 2.4G Receiver
[ 4.393412] usb 3-3: Manufacturer: CX
[ 4.399932] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:25A7:FA67.0002/input/input3
[ 4.402352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.410353] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.412951] ata4.00: ATAPI: HL-DT-STDVDRAM GT32N, AS01, max UDMA/100
[ 4.415952] ata4.00: configured for UDMA/100
[ 4.429326] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133
[ 4.429333] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.454506] hid-generic 0003:25A7:FA67.0002: input,hidraw1: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:12.0-3/input0
[ 4.460645] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:25A7:FA67.0003/input/input4
[ 4.468809] ata1.00: configured for UDMA/133
[ 4.469015] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
[ 4.469753] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.469820] sd 0:0:0:0: [sda] Write Protect is off
[ 4.469825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.469854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.470141] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.473623] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N AS01 PQ: 0 ANSI: 5
[ 4.489658] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.489665] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.490263] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.490412] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.508841] sda: sda1 sda2 < sda5 >
[ 4.509354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.514663] hid-generic 0003:25A7:FA67.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:12.0-3/input1
[ 4.555392] [drm] ib test on ring 5 succeeded
[ 4.556545] [drm] Radeon Display Connectors
[ 4.556548] [drm] Connector 0:
[ 4.556551] [drm] DVI-I-1
[ 4.556553] [drm] HPD1
[ 4.556557] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 4.556558] [drm] Encoders:
[ 4.556561] [drm] DFP1: INTERNAL_UNIPHY1
[ 4.601421] [drm] fb mappable at 0xE045F000
[ 4.601424] [drm] vram apper at 0xE0000000
[ 4.601426] [drm] size 5787648
[ 4.601428] [drm] fb depth is 24
[ 4.601430] [drm] pitch is 6400
[ 4.601557] fbcon: radeondrmfb (fb0) is primary device
[ 4.601688] Console: switching to colour frame buffer device 200x56
[ 4.601769] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.610461] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 4.698374] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 5.382522] clocksource: Switched to clocksource tsc
[ 6.258361] usb 1-6: New USB device found, idVendor=0bda, idProduct=5801
[ 6.258368] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 6.258372] usb 1-6: Product: USB Camera
[ 6.258376] usb 1-6: Manufacturer: Generic
[ 6.258379] usb 1-6: SerialNumber: 200901010001
[ 6.641557] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.593813] random: nonblocking pool is initialized
[ 7.767785] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.767985] systemd[1]: Detected architecture x86.
[ 7.771468] systemd[1]: Set hostname to <bussiere-ET2010AG>.
[ 9.640241] systemd[1]: Listening on udev Control Socket.
[ 9.640361] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.640435] systemd[1]: Listening on Journal Socket.
[ 9.640490] systemd[1]: Listening on udev Kernel Socket.
[ 9.640645] systemd[1]: Created slice System Slice.
[ 9.650892] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.651800] systemd[1]: Starting Nameserver information manager...
[ 9.652488] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 9.653524] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.655714] systemd[1]: Started Braille Device Support.
[ 9.657390] systemd[1]: Listening on Journal Audit Socket.
[ 9.657428] systemd[1]: Reached target Encrypted Volumes.
[ 9.657530] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.658299] systemd[1]: Starting Uncomplicated firewall...
[ 9.659129] systemd[1]: Mounting Debug File System...
[ 9.659184] systemd[1]: Reached target User and Group Name Lookups.
[ 9.659896] systemd[1]: Started Read required files in advance.
[ 9.660112] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.660254] systemd[1]: Created slice User and Session Slice.
[ 9.660280] systemd[1]: Reached target Slices.
[ 9.660542] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.882926] systemd[1]: Mounting Huge Pages File System...
[ 9.883062] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.883144] systemd[1]: Listening on Syslog Socket.
[ 9.883964] systemd[1]: Starting Set console keymap...
[ 9.892796] systemd[1]: Starting Load Kernel Modules...
[ 9.892911] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 9.893656] systemd[1]: Starting Journal Service...
[ 9.893691] systemd[1]: Reached target Remote File Systems (Pre).
[ 9.893729] systemd[1]: Reached target Remote File Systems.
[ 9.896210] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.897739] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.929064] systemd[1]: Started Uncomplicated firewall.
[ 10.138452] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.138504] systemd[1]: Mounted Huge Pages File System.
[ 10.138534] systemd[1]: Mounted Debug File System.
[ 10.196322] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.197793] systemd[1]: Started Remount Root and Kernel File Systems.
[ 10.371078] systemd[1]: Starting udev Coldplug all Devices...
[ 10.371911] systemd[1]: Starting Load/Save Random Seed...
[ 10.523171] systemd[1]: Started Nameserver information manager.
[ 10.524185] systemd[1]: Reached target Network (Pre).
[ 10.541517] systemd[1]: Started Journal Service.
[ 10.820134] systemd-journald[224]: Received request to flush runtime journal from PID 1
[ 11.005852] lp: driver loaded but no devices found
[ 11.023109] ppdev: user-space parallel port driver
[ 14.696747] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.726147] ATK0110 ATK0110:00: No usable hwmon interface detected
[ 15.677768] EDAC MC: Ver: 3.0.0
[ 15.688496] MCE: In-kernel MCE decoding enabled.
[ 15.698680] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.698980] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 15.706482] AMD64 EDAC driver v3.4.0
[ 15.706523] EDAC amd64: DRAM ECC disabled.
[ 15.706537] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.775791] audit: type=1400 audit(1634110845.517:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=434 comm="apparmor_parser"
[ 15.775805] audit: type=1400 audit(1634110845.517:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=434 comm="apparmor_parser"
[ 15.775814] audit: type=1400 audit(1634110845.517:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=434 comm="apparmor_parser"
[ 15.775822] audit: type=1400 audit(1634110845.517:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=434 comm="apparmor_parser"
[ 16.128141] audit: type=1400 audit(1634110845.869:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=433 comm="apparmor_parser"
[ 16.128156] audit: type=1400 audit(1634110845.869:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=433 comm="apparmor_parser"
[ 16.148224] audit: type=1400 audit(1634110845.889:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=520 comm="apparmor_parser"
[ 16.160218] audit: type=1400 audit(1634110845.901:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=559 comm="apparmor_parser"
[ 16.275275] kvm: Nested Virtualization enabled
[ 16.275282] kvm: Nested Paging enabled
[ 16.335670] audit: type=1400 audit(1634110846.077:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=555 comm="apparmor_parser"
[ 16.335686] audit: type=1400 audit(1634110846.077:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=555 comm="apparmor_parser"
[ 16.372566] ath: phy0: Enable LNA combining
[ 16.374016] ath: EEPROM regdomain: 0x60
[ 16.374019] ath: EEPROM indicates we should expect a direct regpair map
[ 16.374023] ath: Country alpha2 being used: 00
[ 16.374025] ath: Regpair used: 0x60
[ 16.463761] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.464331] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8920000, irq=18
[ 16.467169] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 16.497864] media: Linux media interface: v0.10
[ 17.022159] Linux video capture interface: v2.00
[ 17.024196] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B2X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 17.024204] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.024209] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 17.024213] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 17.024216] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 17.024220] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18
[ 17.024224] snd_hda_codec_idt hdaudioC0D0: Mic=0xb
[ 17.039916] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 17.040047] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 17.272028] asus_wmi: ASUS WMI generic driver loaded
[ 17.281402] asus_wmi: Initialization: 0x0
[ 17.281451] asus_wmi: BIOS WMI version: 0.0
[ 17.281492] asus_wmi: SFUN value: 0x0
[ 17.282149] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 17.282268] asus_wmi: Number of fans: 1
[ 17.779202] cfg80211: World regulatory domain updated:
[ 17.779210] cfg80211: DFS Master region: unset
[ 17.779213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.779217] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.779222] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 17.779225] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.779229] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 17.779233] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 17.779237] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 17.779240] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.779243] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 17.891990] uvcvideo: Found UVC 1.00 device USB Camera (0bda:5801)
[ 17.910582] input: USB Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input8
[ 17.910923] usbcore: registered new interface driver uvcvideo
[ 17.910928] USB Video Class driver (1.1.1)
[ 20.045203] Adding 4187132k swap on /dev/sda5. Priority:-1 extents:1 across:4187132k FS
[ 27.954651] IPv6: ADDRCONF(NETDEV_UP): enp8s0f5: link is not ready
[ 27.980967] jme 0000:08:00.5 enp8s0f5: Link is down
[ 27.981063] IPv6: ADDRCONF(NETDEV_UP): enp8s0f5: link is not ready
[ 27.994015] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 28.007710] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 32.843918] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 34.281861] Non-volatile memory driver v1.3
[ 34.797347] wlp2s0: authenticate with ac:3b:77:84:36:f0
[ 34.820299] wlp2s0: send auth to ac:3b:77:84:36:f0 (try 1/3)
[ 34.822209] wlp2s0: authenticated
[ 34.824902] wlp2s0: associate with ac:3b:77:84:36:f0 (try 1/3)
[ 34.835508] wlp2s0: RX AssocResp from ac:3b:77:84:36:f0 (capab=0x411 status=0 aid=5)
[ 34.835606] wlp2s0: associated
[ 34.835667] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[20864.132308] usb 1-5: new high-speed USB device number 4 using ehci-pci
[20864.338423] usb 1-5: New USB device found, idVendor=1bcf, idProduct=8001
[20864.338437] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20864.338446] usb 1-5: Product: SPCA2080 PC Camera
[20864.338453] usb 1-5: Manufacturer: Sunplus IT Co
[20864.506859] uvcvideo: Found UVC 1.00 device SPCA2080 PC Camera (1bcf:8001)
[20864.524881] input: SPCA2080 PC Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input9
[30032.544221] usb 1-5: USB disconnect, device number 4
[30172.818284] usb 1-5: new high-speed USB device number 5 using ehci-pci
[30173.024465] usb 1-5: New USB device found, idVendor=1bcf, idProduct=8001
[30173.024479] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30173.024487] usb 1-5: Product: SPCA2080 PC Camera
[30173.024495] usb 1-5: Manufacturer: Sunplus IT Co
[30173.193051] uvcvideo: Found UVC 1.00 device SPCA2080 PC Camera (1bcf:8001)
[30173.211208] input: SPCA2080 PC Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input10
bussiere@bussiere-ET2010AG:~$
Longue vie a LINUX.
Hors ligne
#9 Le 14/10/2021, à 05:58
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
C'est bizarre : Sunplus IT Co n'a pas l'air de fabriquer des scanners, ils font plutôt des cameras.
Google donne une seule référence pour un scanner aux identifiants usb 1bcf:8001, c'est en danois et les gens n'ont pas réussi à le faire fonctionner.
Tu devrais avoir un CD avec un programme pour Windows, est-ce que le programme se lance avec wine ?
Cordialement,
Guy
Hors ligne
#10 Le 14/10/2021, à 13:30
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour j'ai installé wine par le terminal mais impossible de le trouver dans les programmes
Longue vie a LINUX.
Hors ligne
#11 Le 14/10/2021, à 17:32
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Et si dans un terminal tu tapes
wine
ça donne quoi ?
Cordialement,
Guy
Hors ligne
#12 Le 15/10/2021, à 10:03
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour retour de Wine
bussiere@bussiere-ET2010AG:~$ Wine
La commande « Wine » est introuvable, vouliez-vous dire :
La commande « xine » du paquet « xine-ui » (universe)
La commande « wine » du paquet « wine1.6-i386 » (universe)
La commande « line » du paquet « util-linux » (main)
Wine : commande introuvable
bussiere@bussiere-ET2010AG:~$
Longue vie a LINUX.
Hors ligne
#13 Le 15/10/2021, à 10:10
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Wine et wine ce n'est pas pareil !
Hors ligne
#14 Le 15/10/2021, à 10:45
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Il y a t'il une ligne de commande pour installer wine je n'arrive pas a trouver
Exemple
Install Wine 2.0 (Staging) via official Wine PPA:
The official Wine PPA offers Wine-staging packages that are kinda different to the distro packages.
Wine Staging provides extra features and fixes, but it’s installed to /opt/wine-staging. Thanks to this, you can have both regular Wine version and Wine-Staging in single system.
1. To add the PPA, open terminal (Ctrl+Alt+T) and run the command:
sudo add-apt-repository ppa:wine/wine-builds
For 64-bit system, enable 32-bit architecture (if you haven’t already) via sudo dpkg --add-architecture i386
official-wine-ppa-xenial
2. Then updates and install Wine 2.0 staging via commands:
sudo apt-get update
sudo apt-get install --install-recommends wine-staging
To use Wine-Staging, simply add “/opt/wine-staging/bin/” in the fond of executable, for example:
/opt/wine-staging/bin/wine
/opt/wine-staging/bin/winecfg
For more, see the Wine-Staging usage.
Ça ne fonctionne pas!
Ou
En ordre pour le "wine debian" :
su
dpkg --add-architecture i386
apt-get update
apt-get install wine
Longue vie a LINUX.
Hors ligne
#15 Le 15/10/2021, à 10:47
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Le retour avec wine
bussiere@bussiere-ET2010AG:~$ wine
Usage: wine PROGRAM [ARGUMENTS...] Run the specified program
wine --help Display this help and exit
wine --version Output version information and exit
bussiere@bussiere-ET2010AG:~$
Longue vie a LINUX.
Hors ligne
#16 Le 15/10/2021, à 11:00
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Donc wine est installé.
Où est le programme du CD pour windows ? Il faut le nom complet avec son chemin, genre
/media/bussiere/nom_du_cd/programme.exe
Ensuite il faut lancer dans un terminal
wine /media/bussiere/nom_du_cd/programme.exe
En faisant gaffe aux majuscules !
Cordialement,
Guy
Hors ligne
#17 Le 15/10/2021, à 13:02
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour mais ça je ne comprend pas [Où est le programme du CD pour windows ? Il faut le nom complet avec son chemin, genre
/media/bussiere/nom_du_cd/programme.exe] quel CD Windows?
Longue vie a LINUX.
Hors ligne
#18 Le 15/10/2021, à 14:40
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Que contient le CD ?
Hors ligne
#19 Le 15/10/2021, à 17:59
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
/home/bussiere/Bureau/Screenshot at 2021-10-15 18:58:35.png
Longue vie a LINUX.
Hors ligne
#20 Le 15/10/2021, à 18:13
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Comment tu veux qu'on voit une image qui est sur ton ordinateur ?
C'est quand même possible d'avoir la liste des fichiers de ce CD dans un terminal et de l'afficher ici sans utiliser d'image.
Où as-tu trouvé ton scanner ?
Cordialement,
Guy
Hors ligne
#21 Le 15/10/2021, à 18:22
- xubu1957
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour,
Voir > [Tuto] Poster une image
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#22 Le 15/10/2021, à 18:27
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Merci mais comment je peu donner mes données du disque
Longue vie a LINUX.
Hors ligne
#23 Le 15/10/2021, à 19:31
- gl38
Re : Un logiciel pour Nimofilm [RESOLU]
Tu ouvres un terminal et tu tapes
cd /media/bussiere
puis
ls -l
tu dois voir le nom du CD, tu vas dedans avec un cd
et tu retapes
ls -l
et tu nous le résultat.
Cordialement,
Guy
Hors ligne
#24 Le 16/10/2021, à 10:09
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Bonjour je n'arrive pas a rentrer dans le CD comment il faut faire ?
bussiere@bussiere-ET2010AG:~$ cd /media/bussiere
bussiere@bussiere-ET2010AG:/media/bussiere$ ls -l
total 2
dr-x------ 1 bussiere bussiere 2048 nov. 13 2017 ELM327 software
bussiere@bussiere-ET2010AG:/media/bussiere$ ls -l
total 2
dr-x------ 1 bussiere bussiere 2048 nov. 13 2017 ELM327 software
bussiere@bussiere-ET2010AG:/media/bussiere$
Longue vie a LINUX.
Hors ligne
#25 Le 16/10/2021, à 10:31
- bibitoi74
Re : Un logiciel pour Nimofilm [RESOLU]
Avec capture d’écran
https://pix.cyber-nux.fr/?img=1634376623.png
Dernière modification par bibitoi74 (Le 16/10/2021, à 10:32)
Longue vie a LINUX.
Hors ligne